dmesg - typec128g
Booting Linux on physical CPU 0x0000000000 [0x410fd421]
Linux version 5.10.104-tegra (root@vince-pc) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Tue Jun 20 15:34:37 CST 2023
OF: fdt: memory scan node memory@80000000, reg size 16,
OF: fdt: - 80000000 , c0000000
Machine model: Jetson AGX Orin
efi: EFI v2.70 by EDK II
efi: RTPROP=0x808350598 SMBIOS=0xffff0000 SMBIOS 3.0=0x806e80000 MEMATTR=0x80721c018 ESRT=0x808220598 RNG=0x82a9dde98 MEMRESERVE=0x807225f18
efi: seeding entropy pool
esrt: Reserving ESRT space from 0x0000000808220598 to 0x00000008082205d0.
Reserved memory: created CMA memory pool at 0x000000081a800000, size 256 MiB
OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Zone ranges:
DMA [mem 0x0000000080000000-0x00000000ffffffff]
DMA32 empty
Normal [mem 0x0000000100000000-0x0000000837ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080000000-0x00000000fffdffff]
node 0: [mem 0x00000000fffe0000-0x00000000ffffffff]
node 0: [mem 0x0000000100000000-0x0000000803ffffff]
node 0: [mem 0x0000000804000000-0x00000008061bffff]
node 0: [mem 0x00000008061c0000-0x0000000806758fff]
node 0: [mem 0x0000000806759000-0x000000080691efff]
node 0: [mem 0x000000080691f000-0x0000000806e6ffff]
node 0: [mem 0x0000000806e70000-0x0000000806e8ffff]
node 0: [mem 0x0000000806e90000-0x000000080713ffff]
node 0: [mem 0x0000000807140000-0x000000080718ffff]
node 0: [mem 0x0000000807190000-0x00000008071effff]
node 0: [mem 0x00000008071f0000-0x000000080720ffff]
node 0: [mem 0x0000000807210000-0x000000080722ffff]
node 0: [mem 0x0000000807230000-0x000000080724ffff]
node 0: [mem 0x0000000807250000-0x000000080730ffff]
node 0: [mem 0x0000000807310000-0x000000080749ffff]
node 0: [mem 0x00000008074a0000-0x00000008074cffff]
node 0: [mem 0x00000008074d0000-0x000000080751ffff]
node 0: [mem 0x0000000807520000-0x000000080758ffff]
node 0: [mem 0x0000000807590000-0x000000080776ffff]
node 0: [mem 0x0000000807770000-0x00000008077fffff]
node 0: [mem 0x0000000807800000-0x000000080793ffff]
node 0: [mem 0x0000000807940000-0x000000080797ffff]
node 0: [mem 0x0000000807980000-0x00000008079cffff]
node 0: [mem 0x00000008079d0000-0x00000008079fffff]
node 0: [mem 0x0000000807a00000-0x0000000807a0ffff]
node 0: [mem 0x0000000807a10000-0x000000080802ffff]
node 0: [mem 0x0000000808030000-0x00000008080cffff]
node 0: [mem 0x00000008080d0000-0x000000080817ffff]
node 0: [mem 0x0000000808180000-0x000000080821ffff]
node 0: [mem 0x0000000808220000-0x00000008082affff]
node 0: [mem 0x00000008082b0000-0x000000080834ffff]
node 0: [mem 0x0000000808350000-0x0000000808ecffff]
node 0: [mem 0x0000000808ed0000-0x00000008090affff]
node 0: [mem 0x00000008090b0000-0x000000082a98ffff]
node 0: [mem 0x000000082a990000-0x000000082a9dffff]
node 0: [mem 0x000000082a9e0000-0x000000082e7fffff]
node 0: [mem 0x000000082ea00000-0x000000082edfffff]
node 0: [mem 0x0000000836000000-0x0000000837ffffff]
Initmem setup node 0 [mem 0x0000000080000000-0x0000000837ffffff]
On node 0 totalpages: 8064000
DMA zone: 8192 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 524288 pages, LIFO batch:63
Normal zone: 118272 pages used for memmap
Normal zone: 7539712 pages, LIFO batch:63
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: Trusted OS migration not required
psci: SMC Calling Convention v1.2
percpu: Embedded 32 pages/cpu s90200 r8192 d32680 u131072
pcpu-alloc: s90200 r8192 d32680 u131072 alloc=32*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Detected PIPT I-cache on CPU0
CPU features: detected: GIC system register CPU interface
CPU features: detected: Virtualization Host Extensions
CPU features: kernel page table isolation forced ON by KASLR
CPU features: detected: Kernel page table isolation (KPTI)
CPU features: detected: Spectre-v4
alternatives: patching kernel code
Built 1 zonelists, mobility grouping on. Total pages: 7937536
Kernel command line: root=/dev/nvme0n1p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=tty0 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB)
Memory: 31046368K/32256000K available (18560K kernel code, 3172K rwdata, 7208K rodata, 4032K init, 1418K bss, 947488K reserved, 262144K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GICv3: GIC: Using split EOI/Deactivate mode
GICv3: 960 SPIs implemented
GICv3: 0 Extended SPIs implemented
GICv3: Distributor has no Range Selector support
GICv3: 16 PPIs implemented
GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000
GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70)
GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677]
arch_timer: cp15 timer(s) running at 31.25MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns
sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns
Console: colour dummy device 80x25
printk: console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
SELinux: Initializing.
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
rcu: Hierarchical SRCU implementation.
dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
DTS File Name: /media/vince/DiskForProject/Project/thkm/build_system/build/T234/kernel_source/Linux_for_Tegra/source/public/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/concord/kernel-dts/tegra234-p3701-0004-p3737-0000.dts
DTB Build time: Jun 20 2023 15:37:47
Tegra Revision: A01 SKU: 0xd2 CPU Process: 0 SoC Process: 0
Remapping and enabling EFI services.
smp: Bringing up secondary CPUs ...
Detected PIPT I-cache on CPU1
GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000
CPU1: Booted secondary processor 0x0000000100 [0x410fd421]
Detected PIPT I-cache on CPU2
GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000
CPU2: Booted secondary processor 0x0000000200 [0x410fd421]
Detected PIPT I-cache on CPU3
GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000
CPU3: Booted secondary processor 0x0000000300 [0x410fd421]
Detected PIPT I-cache on CPU4
GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000
CPU4: Booted secondary processor 0x0000010000 [0x410fd421]
Detected PIPT I-cache on CPU5
GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000
CPU5: Booted secondary processor 0x0000010100 [0x410fd421]
Detected PIPT I-cache on CPU6
GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000
CPU6: Booted secondary processor 0x0000010200 [0x410fd421]
Detected PIPT I-cache on CPU7
GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000
CPU7: Booted secondary processor 0x0000010300 [0x410fd421]
smp: Brought up 1 node, 8 CPUs
SMP: Total of 8 processors activated.
CPU features: detected: Privileged Access Never
CPU features: detected: LSE atomic instructions
CPU features: detected: User Access Override
CPU features: detected: 32-bit EL0 Support
CPU features: detected: Common not Private translations
CPU features: detected: RAS Extension Support
CPU features: detected: Data cache clean to the PoU not required for I/D coherence
CPU features: detected: CRC32 instructions
CPU features: detected: Speculative Store Bypassing Safe (SSBS)
CPU: All CPU(s) started at EL2
devtmpfs: initialized
Registered cp15_barrier emulation handler
Registered setend emulation handler
KASLR enabled
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
SMBIOS 3.0.0 present.
DMI: Unknown Jetson AGX Orin/Jetson AGX Orin, BIOS r35.3.1-63e71c9-dirty 05/16/2023
NET: Registered protocol family 16
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.268:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'power_allocator'
thermal_sys: Registered thermal governor 'pid_thermal_gov'
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 32768 entries
tegra234_mc_sid_probe(): tegra234 mc-sid probe successful
Tegra reboot handler registered.
mc: mapped MMIO address: 0xffff800011110000 -> 0x2c10000
mc: mapped MMIO address: 0xffff800011130000 -> 0x2c20000
mc: mapped MMIO address: 0xffff800011150000 -> 0x2c30000
mc: mapped MMIO address: 0xffff800011170000 -> 0x2c40000
mc: mapped MMIO address: 0xffff800011190000 -> 0x2c50000
mc: mapped MMIO address: 0xffff8000111b0000 -> 0x2b80000
mc: mapped MMIO address: 0xffff8000111d0000 -> 0x2b90000
mc: mapped MMIO address: 0xffff8000111f0000 -> 0x2ba0000
mc: mapped MMIO address: 0xffff800011210000 -> 0x2bb0000
mc: mapped MMIO address: 0xffff800011230000 -> 0x1700000
mc: mapped MMIO address: 0xffff800011250000 -> 0x1710000
mc: mapped MMIO address: 0xffff800011270000 -> 0x1720000
mc: mapped MMIO address: 0xffff800011290000 -> 0x1730000
mc: mapped MMIO address: 0xffff8000112b0000 -> 0x1740000
mc: mapped MMIO address: 0xffff8000112d0000 -> 0x1750000
mc: mapped MMIO address: 0xffff8000112f0000 -> 0x1760000
mc: mapped MMIO address: 0xffff800011310000 -> 0x1770000
nv-tegra-mc 2c10000.mc: No mssnvlink node
mc-err: mcerr ops are set to t23x
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
ACPI: Interpreter disabled.
vdd-av1v1-hub: supplied by vdd-5v-sys
vbusA-cvb: supplied by vdd-5v-sys
vbusB-cvb: supplied by vdd-5v-sys
vdd-usbc1-vbus: supplied by vdd-5v-sys
vdd-usbc2-vbus: supplied by vdd-5v-sys
iommu: Default domain type: Translated
eventlib_kernel: keventlib is initialized, test id: 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec
tegra_wdt_t18x 2190000.watchdog: Registered successfully
Registered efivars operations
FPGA manager framework
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
camchar: rtcpu character device driver loaded
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI: disabled
la/ptsa driver initialized.
NET: Registered protocol family 2
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 9120K
hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
kvm [1]: IPA Size Limit: 48 bits
kvm [1]: GICv3: no GICV resource entry
kvm [1]: disabling GICv2 emulation
kvm [1]: GIC system register CPU interface enabled
kvm [1]: vgic interrupt IRQ9
kvm [1]: VHE mode initialized successfully
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=23 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
ntfs: driver 2.1.32 [Flags: R/W].
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
io scheduler mq-deadline registered
io scheduler kyber registered
tegra-pwm 3280000.pwm: PWM clk can sleep in ops
tegra-pwm 32a0000.pwm: PWM clk can sleep in ops
tegra-pwm 32c0000.pwm: PWM clk can sleep in ops
tegra-pwm 32f0000.pwm: PWM clk can sleep in ops
efifb: probing for efifb
efifb: framebuffer at 0x804000000, using 8192k, total 8192k
efifb: mode is 1280x1024x32, linelength=8192, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: EFI VGA frame buffer device
tegra_dc_assign_hw_data: no matching compatible node
tegradccommon module_init failed
tegradc module_init failed
EINJ: ACPI disabled.
tegra-pmc c360000.pmc: scratch reg offset dts data not present
tegra-pmc: ### PMC reset source: MAINSWRST
tegra-pmc: ### PMC reset level: L1
tegra-pmc: ### PMC reset status reg: 0x2d
random: fast init done
printk: console [ttyTCU0] enabled
arm-smmu 12000000.iommu: probing hardware configuration...
arm-smmu 12000000.iommu: SMMUv2 with:
arm-smmu 12000000.iommu: stage 1 translation
arm-smmu 12000000.iommu: stage 2 translation
arm-smmu 12000000.iommu: nested translation
arm-smmu 12000000.iommu: stream matching with 128 register groups
arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only)
arm-smmu 12000000.iommu: Supported page sizes: 0x00001000
arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA
arm-smmu 10000000.iommu: probing hardware configuration...
arm-smmu 10000000.iommu: SMMUv2 with:
arm-smmu 10000000.iommu: stage 1 translation
arm-smmu 10000000.iommu: stage 2 translation
arm-smmu 10000000.iommu: nested translation
arm-smmu 10000000.iommu: stream matching with 128 register groups
arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only)
arm-smmu 10000000.iommu: Supported page sizes: 0x00001000
arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA
arm-smmu 8000000.iommu: probing hardware configuration...
arm-smmu 8000000.iommu: SMMUv2 with:
arm-smmu 8000000.iommu: stage 1 translation
arm-smmu 8000000.iommu: stage 2 translation
arm-smmu 8000000.iommu: nested translation
arm-smmu 8000000.iommu: stream matching with 128 register groups
arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only)
arm-smmu 8000000.iommu: Supported page sizes: 0x00001000
arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA
arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful
tegra_profiler: version: 1.151, samples/io: 51/30
tegra_profiler: auth: init
nvsciipc: loaded module
tun: Universal TUN/TAP device driver, 1.6
hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
hns3: Copyright (c) 2017 Huawei Corporation.
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver
igb: Copyright (c) 2007-2014 Intel Corporation.
Intel(R) 2.5G Ethernet Linux Driver
Copyright(c) 2018 Intel Corporation.
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
usbcore: registered new interface driver r8152
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
usbcore: registered new interface driver qmi_wwan_q
usbcore: registered new interface driver qmi_wwan
usbcore: registered new interface driver cdc_mbim
usbcore: registered new interface driver aqc111
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
tegra-xusb 3610000.xhci: Adding to iommu group 0
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
tegra-xudc 3550000.xudc: Adding to iommu group 1
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver xpad
tegra_rtc c2a0000.rtc: registered as rtc1
tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock
i2c /dev entries driver
tegra-i2c 3160000.i2c: Adding to iommu group 2
tegra-i2c c240000.i2c: Adding to iommu group 2
tegra-i2c 3180000.i2c: Adding to iommu group 2
tegra-i2c 3190000.i2c: Adding to iommu group 2
tegra-i2c 31c0000.i2c: Adding to iommu group 2
tegra-i2c c250000.i2c: Adding to iommu group 2
tegra-i2c 31e0000.i2c: Adding to iommu group 2
tegra-i2c 31b0000.i2c: Adding to iommu group 2
tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint.
tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: [email protected]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Synopsys Designware Multimedia Card Interface Driver
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-tegra 3460000.sdhci: Adding to iommu group 3
SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401
sdhci-tegra 3400000.sdhci: Adding to iommu group 4
tegra-bpmp bpmp: firmware: 463f4d5b75234b74bb7f-1377b684fe5
nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9
nvvrs_pseq 4-003c: NVVRS Model Rev: 0x81
nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0
nvvrs-pseq-rtc nvvrs-pseq-rtc: setting system clock to 2023-07-05T09:00:51 UTC (1688547651)
nvvrs_pseq 4-003c: NVVRS PSEQ probe successful
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
tegra-dce d800000.dce: Adding to iommu group 5
dce: dce_ipc_channel_init:319 Invalid Channel State [0x0] for ch_type [2]
tegra234-aon c000000.aon: Adding to iommu group 6
dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5]
dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [0]. Ignored...
dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5]
c000000.aon:hsp: probed
dce: dce_admin_send_cmd_ver:424 version : [0x2] err : [0x0]
tegra234-aon c000000.aon: init done
dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x1]
tegra23x-psc e860000.psc: Adding to iommu group 7
dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [1] ...
dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignored...
dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignored...
tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____)
dce: dce_admin_setup_clients_ipc:529 Get queue info failed for [2]
tegra23x-psc e860000.psc: init done
dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x2]
tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 8
dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [3] ...
dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored...
dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored...
tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000
dce: dce_start_boot_flow:173 DCE_BOOT_DONE
tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584
tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900
tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80
tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80
tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80
tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080
tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200
tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (113)
tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful
tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=97e50cbff52bc4b542b2989187109c001c01cf77
t19x_cache tegra-cache: probed
scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU
optee: probing for conduit method.
optee: revision 3.19 (3f29c61f)
optee: dynamic shared memory is enabled
optee: initialized driver
nvpmodel: initialized successfully
tegra_hv: get_hvd: not initialized yet
user_ivc_mempool: hypervisor not present
usbcore: registered new interface driver snd-usb-audio
u32 classifier
input device check on
Actions configured
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
NET: Registered protocol family 15
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
9pnet: Installing 9P2000 support
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 3bde4808e59b20d6353226310bac53a65e742fa7'
tegra194-pcie 14180000.pcie: Adding to iommu group 9
tegra194-pcie 14180000.pcie: Using GICv2m MSI allocator
tegra194-pcie 14100000.pcie: Adding to iommu group 10
tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator
tegra194-pcie 14160000.pcie: Adding to iommu group 11
tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator
tegra194-pcie 141a0000.pcie: Adding to iommu group 12
tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator
tegra194-pcie 141a0000.pcie: Failed to get slot regulators: -517
tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 13
host1x 13e40000.host1x: Adding to iommu group 14
host1x 13e40000.host1x: initialized
iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 15
iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 16
iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 17
iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 18
iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 19
iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 20
iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 21
iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 22
iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000)
iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 23
iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 24
iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 25
iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 26
iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 27
iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 28
iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 29
iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000)
iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 30
iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000)
random: crng init done
falcon 15340000.vic: Adding to iommu group 31
falcon 15340000.vic: initialized
falcon 15380000.nvjpg: Adding to iommu group 32
falcon 15380000.nvjpg: initialized
falcon 15540000.nvjpg1: Adding to iommu group 33
falcon 15540000.nvjpg1: initialized
falcon 154c0000.nvenc: Adding to iommu group 34
falcon 154c0000.nvenc: initialized
falcon 15a50000.ofa: Adding to iommu group 35
falcon 15a50000.ofa: initialized
nvdec 15480000.nvdec: Adding to iommu group 36
nvdec 15480000.nvdec: initialized
tsec 15500000.tsec: Adding to iommu group 37
tsec 15500000.tsec: initialized
gic 2a41000.agic-controller: GIC IRQ controller registered
tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered
gpio-394 (camera-control-output-low): hogged as output/low
gpio-397 (camera-control-output-low): hogged as output/low
gpio-487 (camera-control-output-low): hogged as output/low
gpio-486 (camera-control-output-low): hogged as output/low
gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio
gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon
tegra-pwm 3280000.pwm: PWM clk can sleep in ops
tegra-pwm 32a0000.pwm: PWM clk can sleep in ops
tegra-pwm 32c0000.pwm: PWM clk can sleep in ops
tegra-pwm 32f0000.pwm: PWM clk can sleep in ops
misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs
tegra194-isp5 14800000.isp: Adding to iommu group 38
t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU
t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized
tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 39
tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 40
scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU
scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized
scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU
scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized
scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU
scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 41
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 42
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 43
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 44
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 45
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 46
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 47
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000)
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 48
pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000)
pva 16000000.pva0: Adding to iommu group 49
pva 16000000.pva0: initialized
nvdla 15880000.nvdla0: Adding to iommu group 50
nvdla 15880000.nvdla0: initialized
nvdla 158c0000.nvdla1: Adding to iommu group 51
nvdla 158c0000.nvdla1: initialized
tegra-gpcdma 2600000.gpcdma: Adding to iommu group 2
tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels
tegra-fuse-burn efuse-burn: shutdown limit check disabled
tegra-fuse-burn efuse-burn: Fuse burn driver initialized
tegra-xusb 3610000.xhci: Firmware timestamp: 2023-02-10 03:48:10 UTC, Version: 80.05 release
tegra-xusb 3610000.xhci: xHCI Host Controller
tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1
tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810
tegra-xusb 3610000.xhci: irq 230, io mem 0x03610000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd
usb usb1: SerialNumber: 3610000.xhci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
tegra-xusb 3610000.xhci: xHCI Host Controller
tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2
tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd
usb usb2: SerialNumber: 3610000.xhci
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 1-3: new full-speed USB device number 2 using tegra-xusb
tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurrent event probing
cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 2008000 KHz, changing to: 2035200 KHz
cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2009000 KHz, changing to: 2035200 KHz
tegra194-cpufreq e000000.ccplex: probed with ICC
tegra194-pcie 14180000.pcie: Using GICv2m MSI allocator
sdhci-tegra 3400000.sdhci: Got CD GPIO
tegra194-pcie 14180000.pcie: host bridge /pcie@14180000 ranges:
tegra194-pcie 14180000.pcie: IO 0x0038100000..0x00381fffff -> 0x0038100000
tegra194-pcie 14180000.pcie: MEM 0x2728000000..0x272fffffff -> 0x0040000000
tegra194-pcie 14180000.pcie: MEM 0x2440000000..0x2727ffffff -> 0x2440000000
irq: IRQ297: trimming hierarchy from :interrupt-controller@f400000-1
mmc0: CQHCI version 5.10
sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 297
mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit
usb 1-3: New USB device found, idVendor=8087, idProduct=0025, bcdDevice= 0.02
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
tegra194-pcie 14180000.pcie: Link up
tegra194-pcie 14180000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x38100000-0x381fffff])
pci_bus 0000:00: root bus resource [mem 0x2728000000-0x272fffffff] (bus address [0x40000000-0x47ffffff])
pci_bus 0000:00: root bus resource [mem 0x2440000000-0x2727ffffff pref]
pci 0000:00:00.0: [10de:229c] type 01 class 0x060400
pci 0000:00:00.0: PME# supported from D0 D3hot
pci 0000:01:00.0: [8086:2526] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: BAR 14: assigned [mem 0x2728000000-0x27280fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x2728000000-0x2728003fff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
pci 0000:00:00.0: bridge window [mem 0x2728000000-0x27280fffff]
mmc0: Command Queue Engine enabled
pci 0000:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512
mmc0: periodic cache flush enabled
pci 0000:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128
mmc0: new HS400 Enhanced strobe MMC card at address 0001
pcieport 0000:00:00.0: Adding to iommu group 9
mmcblk0: mmc0:0001 G1M15M 59.3 GiB
pcieport 0000:00:00.0: PME: Signaling with IRQ 64
mmcblk0rpmb: mmc0:0001 G1M15M partition 3 4.00 MiB, chardev (511:0)
pcieport 0000:00:00.0: AER: enabled with IRQ 64
tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator
mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges:
tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000
tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000
usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb
tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000
usb 2-3: New USB device found, idVendor=2109, idProduct=0822, bcdDevice= 7.f3
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: USB3.1 Hub
usb 2-3: Manufacturer: VIA Labs, Inc.
usb 2-3: SerialNumber: 000000001
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
tegra194-pcie 14100000.pcie: Link up
tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [bus 00-ff]
pci_bus 0001:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x30100000-0x301fffff])
pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff])
pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref]
pci 0001:00:00.0: [10de:229e] type 01 class 0x060400
pci 0001:00:00.0: PME# supported from D0 D3hot
pci 0001:01:00.0: [8086:0d9f] type 00 class 0x020000
pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
pci 0001:01:00.0: reg 0x1c: [mem 0x00000000-0x00003fff]
pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a81fffff]
pci 0001:01:00.0: BAR 0: assigned [mem 0x20a8000000-0x20a80fffff]
pci 0001:01:00.0: BAR 3: assigned [mem 0x20a8100000-0x20a8103fff]
pci 0001:00:00.0: PCI bridge to [bus 01-ff]
pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a81fffff]
pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
pci 0001:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
pcieport 0001:00:00.0: Adding to iommu group 10
pcieport 0001:00:00.0: PME: Signaling with IRQ 66
pcieport 0001:00:00.0: AER: enabled with IRQ 66
igc 0001:01:00.0: Adding to iommu group 10
igc 0001:01:00.0: enabling device (0000 -> 0002)
usb 1-4: new high-speed USB device number 3 using tegra-xusb
igc 0001:01:00.0 (unnamed net_device) (uninitialized): PHC added
igc 0001:01:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
igc 0001:01:00.0 eth0: MAC: 4c:62:7b:00:00:33
tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator
tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges:
tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000
tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000
tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000
usb 1-4: New USB device found, idVendor=2109, idProduct=2822, bcdDevice= 7.f3
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: USB2.0 Hub
usb 1-4: Manufacturer: VIA Labs, Inc.
usb 1-4: SerialNumber: 000000001
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
tegra194-pcie 14160000.pcie: Link up
tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00
pci_bus 0004:00: root bus resource [bus 00-ff]
pci_bus 0004:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x36100000-0x361fffff])
pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff])
pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref]
pci 0004:00:00.0: [10de:229c] type 01 class 0x060400
pci 0004:00:00.0: PME# supported from D0 D3hot
pci 0004:01:00.0: [1bc0:1002] type 00 class 0x010802
pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
pci 0004:01:00.0: PME# supported from D0 D3hot
pci 0004:00:00.0: BAR 14: assigned [mem 0x2428000000-0x24280fffff]
pci 0004:01:00.0: BAR 0: assigned [mem 0x2428000000-0x2428003fff 64bit]
pci 0004:00:00.0: PCI bridge to [bus 01-ff]
pci 0004:00:00.0: bridge window [mem 0x2428000000-0x24280fffff]
pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
pci 0004:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
pcieport 0004:00:00.0: Adding to iommu group 11
pcieport 0004:00:00.0: PME: Signaling with IRQ 68
pcieport 0004:00:00.0: AER: enabled with IRQ 68
nvme 0004:01:00.0: Adding to iommu group 11
nvme nvme0: pci function 0004:01:00.0
nvme 0004:01:00.0: enabling device (0000 -> 0002)
tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator
nvme nvme0: missing or invalid SUBNQN field.
tegra194-pcie 141a0000.pcie: Failed to get slot regulators: -517
vdd-3v3-pcie: supplied by vdd-3v3-sys
nvme nvme0: allocated 16 MiB host memory buffer.
avdd-cam-2v8: supplied by vdd-3v3-sys
vdd-dp: supplied by vdd-3v3-sys
nvme nvme0: 8/0/0 default/read/poll queues
vdd-3v3-sd: supplied by vdd-3v3-sys
nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16
dsi-vdd-1v8-bl-en: supplied by vdd-1v8-sys
tegra194-isp5 14800000.isp: initialized
tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized
(NULL device *): fops function table already registered
tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized
tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator
sdhci-tegra 3400000.sdhci: Got CD GPIO
sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 297
tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges:
tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000
tegra194-pcie 141a0000.pcie: MEM 0x2b28000000..0x2b2fffffff -> 0x0040000000
tegra194-pcie 141a0000.pcie: MEM 0x2740000000..0x2b27ffffff -> 0x2740000000
usb 2-3.1: new SuperSpeedPlus Gen 2 USB device number 3 using tegra-xusb
usb 2-3.1: New USB device found, idVendor=2c7c, idProduct=0800, bcdDevice= 4.14
usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.1: Product: RM502Q-AE
usb 2-3.1: Manufacturer: Quectel
usb 2-3.1: SerialNumber: 564ea1e7
usb 2-3.1: Enable of device-initiated U1 failed.
usb 2-3.1: Enable of device-initiated U2 failed.
qmi_wwan_q 2-3.1:1.4: cdc-wdm0: USB WDM device
qmi_wwan_q 2-3.1:1.4: Quectel RM502Q-AE work on RawIP mode
qmi_wwan_q 2-3.1:1.4: rx_urb_size = 31744
qmi_wwan_q 2-3.1:1.4 wwan0: register 'qmi_wwan_q' at usb-3610000.xhci-3.1, RMNET/USB device, fe:f4:68:99:a2:d0
net wwan0: qmap_register_device wwan0_1
usb 2-3.1: Enable of device-initiated U1 failed.
usb 2-3.1: Enable of device-initiated U2 failed.
tegra194-pcie 141a0000.pcie: Link up
tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00
pci_bus 0005:00: root bus resource [bus 00-ff]
pci_bus 0005:00: root bus resource [io 0x300000-0x3fffff] (bus address [0x3a100000-0x3a1fffff])
pci_bus 0005:00: root bus resource [mem 0x2b28000000-0x2b2fffffff] (bus address [0x40000000-0x47ffffff])
pci_bus 0005:00: root bus resource [mem 0x2740000000-0x2b27ffffff pref]
pci 0005:00:00.0: [10de:229a] type 01 class 0x060400
pci 0005:00:00.0: PME# supported from D0 D3hot
pci 0005:01:00.0: [1d79:2263] type 00 class 0x010802
pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
pci 0005:00:00.0: BAR 14: assigned [mem 0x2b28000000-0x2b280fffff]
pci 0005:01:00.0: BAR 0: assigned [mem 0x2b28000000-0x2b28003fff 64bit]
pci 0005:00:00.0: PCI bridge to [bus 01-ff]
pci 0005:00:00.0: bridge window [mem 0x2b28000000-0x2b280fffff]
pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
pci 0005:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
pcieport 0005:00:00.0: Adding to iommu group 12
usb 2-3.2: new SuperSpeed Gen 1 USB device number 4 using tegra-xusb
pcieport 0005:00:00.0: PME: Signaling with IRQ 70
pcieport 0005:00:00.0: AER: enabled with IRQ 70
nvme 0005:01:00.0: Adding to iommu group 12
nvme nvme1: pci function 0005:01:00.0
nvme 0005:01:00.0: enabling device (0000 -> 0002)
irq: IRQ313: trimming hierarchy from :pmc@c360000
irq: IRQ315: trimming hierarchy from :interrupt-controller@f400000-1
usb 2-3.2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.04
irq: IRQ316: trimming hierarchy from :pmc@c360000
usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
input: gpio-keys as /devices/platform/gpio-keys/input/input0
nvme nvme1: missing or invalid SUBNQN field.
usb 2-3.2: Product: 4-Port USB 3.0 Hub
tegra-se-nvhost 15810000.se: Adding to iommu group 52
usb 2-3.2: Manufacturer: Generic
tegra-se-nvhost 15810000.se: initialized
hub 2-3.2:1.0: USB hub found
hub 2-3.2:1.0: 4 ports detected
nvme nvme1: 8/0/0 default/read/poll queues
tegra-se-nvhost 15810000.se: tegra_se_probe: complete
nvme1n1: p1
tegra-se-nvhost 15820000.se: Adding to iommu group 53
tegra-se-nvhost 15820000.se: initialized
tegra-se-nvhost 15820000.se: tegra_se_probe: complete
tegra-se-nvhost 15840000.se: Adding to iommu group 54
tegra-se-nvhost 15840000.se: initialized
tegra-se-nvhost 15840000.se: tegra_se_probe: complete
tegra_actmon d230000.actmon: in actmon_register()...
tegra_actmon d230000.actmon: bwmgr_disable = 1
tegra_actmon d230000.actmon: initialization Completed for the device mc_all
hvc_sysfs: hypervisor is not present
usb 2-3.4: new SuperSpeedPlus Gen 2 USB device number 5 using tegra-xusb
usb 2-3.4: New USB device found, idVendor=2109, idProduct=0822, bcdDevice= 5.f3
usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.4: Product: USB3.1 Hub
usb 2-3.4: Manufacturer: VIA Labs, Inc.
usb 2-3.4: SerialNumber: 000000001
hub 2-3.4:1.0: USB hub found
hub 2-3.4:1.0: 4 ports detected
ALSA device list:
No soundcards found.
Freeing unused kernel memory: 4032K
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
mminit_loglevel=4
Root device found: nvme0n1p1
Found dev node: /dev/nvme0n1p1
EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
Rootfs mounted over nvme0n1p1
Switching from initrd to actual rootfs
usb 1-4.2: new high-speed USB device number 4 using tegra-xusb
x_tables: module verification failed: signature and/or required key missing - tainting kernel
systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture arm64.
systemd[1]: Set hostname to .
usb 1-4.2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.04
usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.2: Product: 4-Port USB 2.0 Hub
usb 1-4.2: Manufacturer: Generic
hub 1-4.2:1.0: USB hub found
hub 1-4.2:1.0: 4 ports detected
systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Mounting snaps.
systemd[1]: Reached target Mounted snaps.
systemd[1]: Reached target Swap.
systemd[1]: Listening on RPCbind Server Activation Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
usb 1-4.4: new high-speed USB device number 5 using tegra-xusb
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module chromeos_pstore...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Starting Load Kernel Module efi_pstore...
systemd[1]: Starting Load Kernel Module pstore_blk...
systemd[1]: Starting Load Kernel Module pstore_zone...
systemd[1]: Starting Load Kernel Module ramoops...
systemd[1]: Starting NVIDIA specific first-boot udev script...
systemd[1]: Started Nameserver information manager.
systemd[1]: Reached target Network (Pre).
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit
systemd[1]: Starting Remount Root and Kernel File Systems...
EXT4-fs (nvme0n1p1): re-mounted. Opts: (null)
nvmap_heap_init: nvmap_heap_init: created heap block cache
tegra-carveouts tegra-carveouts: fsi :dma coherent mem declare 0x0000000833000000,16777216
tegra-carveouts tegra-carveouts: assigned reserved memory node fsi-carveout
tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x0000000849800000,914358272
tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout
nvmap_page_pool_init: Total RAM pages: 7830416
nvmap_page_pool_init: nvmap page pool size: 978802 pages (3823 MB)
nvmap_background_zero_thread: PP zeroing thread starting.
misc nvmap: created heap vpr base 0x0000000849800000 size (892928KiB)
misc nvmap: created heap fsi base 0x0000000833000000 size (16384KiB)
usb 1-4.4: New USB device found, idVendor=2109, idProduct=2822, bcdDevice= 5.f3
usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.4: Product: USB2.0 Hub
usb 1-4.4: Manufacturer: VIA Labs, Inc.
usb 1-4.4: SerialNumber: 000000001
hub 1-4.4:1.0: USB hub found
nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000
hub 1-4.4:1.0: 5 ports detected
usb 1-4.2.2: new full-speed USB device number 6 using tegra-xusb
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Started Journal Service.
systemd-journald[278]: Received client request to flush runtime journal.
usb 1-4.2.2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
usb 1-4.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.2.2: Product: USB Receiver
usb 1-4.2.2: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/platform/3610000.xhci/usb1/1-4/1-4.2/1-4.2.2/1-4.2.2:1.0/0003:046D:C534.0001/input/input1
hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3610000.xhci-4.2.2/input0
input: Logitech USB Receiver Mouse as /devices/platform/3610000.xhci/usb1/1-4/1-4.2/1-4.2.2/1-4.2.2:1.1/0003:046D:C534.0002/input/input2
input: Logitech USB Receiver Consumer Control as /devices/platform/3610000.xhci/usb1/1-4/1-4.2/1-4.2.2/1-4.2.2:1.1/0003:046D:C534.0002/input/input3
usb 2-3.4.3: new SuperSpeedPlus Gen 2 USB device number 6 using tegra-xusb
usb 2-3.4.3: New USB device found, idVendor=0bda, idProduct=9210, bcdDevice=31.00
usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.4.3: Product: RTL9210B-CG
usb 2-3.4.3: Manufacturer: Realtek
usb 2-3.4.3: SerialNumber: 012345678905
usb 2-3.4.3: Enable of device-initiated U1 failed.
usb 2-3.4.3: Enable of device-initiated U2 failed.
input: Logitech USB Receiver System Control as /devices/platform/3610000.xhci/usb1/1-4/1-4.2/1-4.2.2/1-4.2.2:1.1/0003:046D:C534.0002/input/input4
hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3610000.xhci-4.2.2/input1
using random self ethernet address
using random host ethernet address
spi-tegra114 3210000.spi: Adding to iommu group 2
spi-tegra114 3230000.spi: Adding to iommu group 2
Intel(R) 2.5G Ethernet Linux Driver
Copyright(c) 2018 Intel Corporation.
Error: Driver 'igc' is already registered, aborting...
Intel(R) Wireless WiFi driver for Linux
iwlwifi 0000:01:00.0: Adding to iommu group 9
iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
tegra-hda 3510000.hda: Adding to iommu group 55
irq: IRQ331: trimming hierarchy from :pmc@c360000
tegra-adma 2930000.adma: Tegra210 ADMA driver registered 16 channels
nvadsp 2993000.adsp: Adding to iommu group 56
nvadsp 2993000.adsp: in probe()...
rt5640 8-001c: Device with ID register 0xffff1b2b is not rt5640/39
loop: module loaded
irq: IRQ332: trimming hierarchy from :pmc@c360000
nct1008_nct72 4-004c: starting parse dt
nct1008_nct72 4-004c: !!!Found deprecated property!!!
nct1008_nct72 4-004c: success parsing dt
nct1008_nct72 4-004c: success in enabling tmp451 VDD rail
cpu-throttle-alert cooling device registered.
gpu-throttle-alert cooling device registered.
cv0-throttle-alert cooling device registered.
cv1-throttle-alert cooling device registered.
cv2-throttle-alert cooling device registered.
nvadsp 2993000.adsp: nvadsp_app_module_probe
iwlwifi 0000:01:00.0: WRT: Overriding region id 0
soc0-throttle-alert cooling device registered.
iwlwifi 0000:01:00.0: WRT: Overriding region id 1
iwlwifi 0000:01:00.0: WRT: Overriding region id 2
iwlwifi 0000:01:00.0: WRT: Overriding region id 3
iwlwifi 0000:01:00.0: WRT: Overriding region id 4
iwlwifi 0000:01:00.0: WRT: Overriding region id 6
iwlwifi 0000:01:00.0: WRT: Overriding region id 8
iwlwifi 0000:01:00.0: WRT: Overriding region id 9
iwlwifi 0000:01:00.0: WRT: Overriding region id 10
iwlwifi 0000:01:00.0: WRT: Overriding region id 11
iwlwifi 0000:01:00.0: WRT: Overriding region id 15
soc1-throttle-alert cooling device registered.
iwlwifi 0000:01:00.0: WRT: Overriding region id 16
iwlwifi 0000:01:00.0: WRT: Overriding region id 18
iwlwifi 0000:01:00.0: WRT: Overriding region id 19
iwlwifi 0000:01:00.0: WRT: Overriding region id 20
iwlwifi 0000:01:00.0: WRT: Overriding region id 21
soc2-throttle-alert cooling device registered.
iwlwifi 0000:01:00.0: WRT: Overriding region id 28
iwlwifi 0000:01:00.0: loaded firmware version 46.4d093a30.0 9260-th-b0-jf-b0-46.ucode op_mode iwlmvm
nvidia: loading out-of-tree module taints kernel.
hot-surface-alert cooling device registered.
nv_platform 13800000.display: Adding to iommu group 57
platform 13800000.display:nvdisplay-niso: Adding to iommu group 58
NVRM: loading NVIDIA UNIX Open Kernel Module for aarch64 35.3.1 Release Build (vince@vince-pc) 公曆 20廿三年 六月 十五日 週四 九時57分十秒
nct1008_nct72 4-004c: LOC shutdown limit 107
nct1008_nct72 4-004c: EXT shutdown limit 107
nct1008_nct72 4-004c: initial LOC temp: 37000
nct1008_nct72 4-004c: initial EXT temp: 38250
nct1008_nct72 4-004c: hi_b:-4, lo_b:0
nct1008_nct72 4-004c: nct1008_probe: initialized
input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=3 as /devices/platform/3510000.hda/sound/card0/input7
input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=7 as /devices/platform/3510000.hda/sound/card0/input8
input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=8 as /devices/platform/3510000.hda/sound/card0/input9
input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=9 as /devices/platform/3510000.hda/sound/card0/input10
irq: IRQ334: trimming hierarchy from :pmc@c360000
tegra210-adsp aconnect@2a41000:adsp_audio: Adding to iommu group 56
tegra210_adsp_audio_probe: platform probe started
tegra210-adsp tegra210-adsp: Default param-type to BYTE for mp3-dec1
tegra210-adsp tegra210-adsp: Default param-type to BYTE for spkprot
tegra210-adsp tegra210-adsp: Default param-type to BYTE for src
tegra210-adsp tegra210-adsp: Default param-type to BYTE for aac-dec1
tegra210-adsp tegra210-adsp: Default param-type to BYTE for aec
tegra210-adsp tegra210-adsp: Default param-type to BYTE for wire
tegra210-adsp tegra210-adsp: adma channel page address dt entry not found
tegra210-adsp tegra210-adsp: using adma channel page 0
nvadsp 2993000.adsp: ADSP OS firmware already loaded
OF: graph: no port node found in /i2c@c240000/ucsi_ccg@8/connector@0
ucsi_ccg 1-0008: Port-0: no role switch found
usb 2-3.4.3: Enable of device-initiated U1 failed.
usb 1-4.4.4: new high-speed USB device number 7 using tegra-xusb
usb 2-3.4.3: Enable of device-initiated U2 failed.
scsi host0: uas
scsi 0:0:0:0: Direct-Access Realtek RTL9210B-CG 1.00 PQ: 0 ANSI: 6
OF: graph: no port node found in /i2c@c240000/ucsi_ccg@8/connector@0
OF: graph: no port node found in /i2c@c240000/ucsi_ccg@8/connector@0
Mass Storage Function, version: 2009/09/11
LUN: removable file: (no medium)
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
using random self ethernet address
using random host ethernet address
tegra-asoc: sound: Adding to iommu group 56
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 37 00 00 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
rndis0: HOST MAC 8a:98:84:f9:5e:d8
rndis0: MAC 8a:98:84:f9:5e:d9
usb0: HOST MAC 8a:98:84:f9:5e:da
usb0: MAC 8a:98:84:f9:5e:db
tegra-xudc 3550000.xudc: EP 0 (type: ctrl, dir: out) enabled
l4tbr0: port 1(rndis0) entered blocking state
l4tbr0: port 1(rndis0) entered disabled state
device rndis0 entered promiscuous mode
l4tbr0: port 2(usb0) entered blocking state
l4tbr0: port 2(usb0) entered disabled state
device usb0 entered promiscuous mode
usb 1-4.4.4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
usb 1-4.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-4.4.4: Product: USB2.0 Hub
hub 1-4.4.4:1.0: USB hub found
hub 1-4.4.4:1.0: 4 ports detected
sda:
sd 0:0:0:0: [sda] Attached SCSI disk
cryptd: max_cpu_qlen set to 1000
usb 2-3.4.4: new SuperSpeed Gen 1 USB device number 7 using tegra-xusb
usb 2-3.4.4: New USB device found, idVendor=05e3, idProduct=0749, bcdDevice=15.32
usb 2-3.4.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2
usb 2-3.4.4: Product: USB3.0 Card Reader
usb 2-3.4.4: Manufacturer: Generic
usb 2-3.4.4: SerialNumber: 000000001532
usb-storage 2-3.4.4:1.0: USB Mass Storage device detected
scsi host1: usb-storage 2-3.4.4:1.0
tegra210-adsp tegra210-adsp: Loaded app wire
tegra210-adsp tegra210-adsp: Loaded app apm
tegra210-adsp tegra210-adsp: Loaded app adma
tegra210-adsp tegra210-adsp: Loaded app adma_tx
nvadsp_set_adma_dump_reg: callback for adma reg dump is sent to 00000000dceef848
tegra210-adsp tegra210-adsp: Tegra210 ADSP driver successfully registered
usb 1-4.4.5: new high-speed USB device number 8 using tegra-xusb
iwlwifi 0000:01:00.0: Detected Intel(R) Wireless-AC 9260 160MHz, REV=0x324
iwlwifi 0000:01:00.0: base HW address: f8:ac:65:9b:ff:2d
usb 1-4.4.5: New USB device found, idVendor=2109, idProduct=8818, bcdDevice= 0.01
usb 1-4.4.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.4.5: Product: USB Billboard Device
usb 1-4.4.5: Manufacturer: VIA Labs, Inc.
usb 1-4.4.5: SerialNumber: 0000000000000001
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone11: failed to read out thermal zone (-61)
logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3610000.xhci-4.2.2/input0
logitech-djreceiver 0003:046D:C534.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3610000.xhci-4.2.2/input1
logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1
input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/platform/3610000.xhci/usb1/1-4/1-4.2/1-4.2.2/1-4.2.2:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input11
input: Logitech Wireless Keyboard PID:4023 Consumer Control as /devices/platform/3610000.xhci/usb1/1-4/1-4.2/1-4.2.2/1-4.2.2:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input12
logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
input: Logitech Wireless Keyboard PID:4023 System Control as /devices/platform/3610000.xhci/usb1/1-4/1-4.2/1-4.2.2/1-4.2.2:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input13
hid-generic 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-3610000.xhci-4.2.2/input1:1
input: Logitech Wireless Mouse PID:4022 Mouse as /devices/platform/3610000.xhci/usb1/1-4/1-4.2/1-4.2.2/1-4.2.2:1.1/0003:046D:C534.0002/0003:046D:4022.0004/input/input18
hid-generic 0003:046D:4022.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4022] on usb-3610000.xhci-4.2.2/input1:2
pstore: Using crash dump compression: deflate
printk: console [ramoops-1] enabled
pstore: Registered ramoops as persistent store backend
ramoops: using 0x200000@0x82e800000, ecc: 0
usbcore: registered new interface driver btusb
Bluetooth: hci0: Firmware revision 0.1 build 26 week 11 2020
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP socket layer initialized
usbcore: registered new interface driver option
option 2-3.1:1.0: GSM modem (1-port) converter detected
usb 2-3.1: GSM modem (1-port) converter now attached to ttyUSB0
option 2-3.1:1.1: GSM modem (1-port) converter detected
usb 2-3.1: GSM modem (1-port) converter now attached to ttyUSB1
option 2-3.1:1.2: GSM modem (1-port) converter detected
usb 2-3.1: GSM modem (1-port) converter now attached to ttyUSB2
option 2-3.1:1.3: GSM modem (1-port) converter detected
usb 2-3.1: GSM modem (1-port) converter now attached to ttyUSB3
nvgpu: 17000000.ga10b tpc_pg_mask_store:1067 [INFO] no value change, same mask already set
scsi 1:0:0:0: Direct-Access Generic STORAGE DEVICE 1532 PQ: 0 ANSI: 6
nvgpu: 17000000.ga10b gk20a_scale_init:539 [INFO] enabled scaling for GPU
input: Logitech Wireless Keyboard PID:4023 as /devices/platform/3610000.xhci/usb1/1-4/1-4.2/1-4.2.2/1-4.2.2:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input22
logitech-hidpp-device 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-3610000.xhci-4.2.2/input1:1
scsi 1:0:0:1: Direct-Access Generic STORAGE DEVICE 1532 PQ: 0 ANSI: 6
input: Logitech Wireless Mouse PID:4022 as /devices/platform/3610000.xhci/usb1/1-4/1-4.2/1-4.2.2/1-4.2.2:1.1/0003:046D:C534.0002/0003:046D:4022.0004/input/input23
logitech-hidpp-device 0003:046D:4022.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4022] on usb-3610000.xhci-4.2.2/input1:2
sd 1:0:0:0: [sdb] Attached SCSI removable disk
sd 1:0:0:1: [sdc] Attached SCSI removable disk
zram: Added device: zram0
zram: Added device: zram1
zram: Added device: zram2
zram: Added device: zram3
zram: Added device: zram4
zram: Added device: zram5
zram: Added device: zram6
zram: Added device: zram7
zram0: detected capacity change from 0 to 2004586496
Adding 1957600k swap on /dev/zram0. Priority:5 extents:1 across:1957600k SS
zram1: detected capacity change from 0 to 2004586496
Adding 1957600k swap on /dev/zram1. Priority:5 extents:1 across:1957600k SS
zram2: detected capacity change from 0 to 2004586496
Adding 1957600k swap on /dev/zram2. Priority:5 extents:1 across:1957600k SS
zram3: detected capacity change from 0 to 2004586496
Adding 1957600k swap on /dev/zram3. Priority:5 extents:1 across:1957600k SS
zram4: detected capacity change from 0 to 2004586496
Adding 1957600k swap on /dev/zram4. Priority:5 extents:1 across:1957600k SS
zram5: detected capacity change from 0 to 2004586496
Adding 1957600k swap on /dev/zram5. Priority:5 extents:1 across:1957600k SS
zram6: detected capacity change from 0 to 2004586496
Adding 1957600k swap on /dev/zram6. Priority:5 extents:1 across:1957600k SS
zram7: detected capacity change from 0 to 2004586496
Adding 1957600k swap on /dev/zram7. Priority:5 extents:1 across:1957600k SS
Bridge firewalling registered
fuse: init (API version 7.32)
nvidia-modeset: Loading NVIDIA UNIX Open Kernel Mode Setting Driver for aarch64 35.3.1 Release Build (vince@vince-pc) 公曆 20廿三年 六月 十五日 週四 九時57分十一秒
igc 0001:01:00.0 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x2080013f result 0x56:
NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x2080017e result 0x56:
NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x2080014a result 0x56:
NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x730190 result 0x56:
NVRM nvAssertFailedNoLog: Assertion failed: minRequiredIsoBandwidthKBPS