dmesg - std
amd_pstate_ut: 2 amd_pstate_ut_check_enabled fail!
amd_pstate_ut: 3 amd_pstate_ut_check_perf success!
amd_pstate_ut: 4 amd_pstate_ut_check_freq success!
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered PF_LLC protocol family
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
u32 classifier
Performance counters on
input device check on
Actions configured
gre: GRE over IPv4 demultiplexor driver
Initializing XFRM netlink socket
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
NET: Registered PF_KEY protocol family
8021q: 802.1Q VLAN Support v1.8
x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
microcode: CPU0: patch_level=0x00000000
microcode: CPU1: patch_level=0x00000000
microcode: CPU2: patch_level=0x00000000
microcode: CPU3: patch_level=0x00000000
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (12672776502, 7652607)->(12684798663, -4369554)
Loading compiled-in X.509 certificates
Key type .fscrypt registered
Key type fscrypt-provisioning registered
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
ALSA device list:
No soundcards found.
TAP version 14
1..0
Freeing unused kernel image (initmem) memory: 1504K
cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Write protecting the kernel read-only data: 24576k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 924K
rodata_test: all tests were successful
Run /init as init process
with arguments:
/init
auto
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=Linux-6-n
usb 1-4: new full-speed USB device number 2 using ohci-pci
usb 2-1: new low-speed USB device number 2 using ohci-pci
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
ahci 0000:00:11.0: version 3.0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
usb 1-4: New USB device found, idVendor=058f, idProduct=9360, bcdDevice= 1.00
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: USB Reader
usb 1-4: Manufacturer:
usb 1-4: SerialNumber: 2004888
scsi host4: ahci
usb-storage 1-4:1.0: USB Mass Storage device detected
scsi host5: usb-storage 1-4:1.0
scsi host6: ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb6a000 port 0xfeb6a100 irq 26
ata2: SATA max UDMA/133 abar m2048@0xfeb6a000 port 0xfeb6a180 irq 26
ata3: SATA max UDMA/133 abar m2048@0xfeb6a000 port 0xfeb6a200 irq 26
ata4: SATA max UDMA/133 abar m2048@0xfeb6a000 port 0xfeb6a280 irq 26
ata5: SATA max UDMA/133 abar m2048@0xfeb6a000 port 0xfeb6a300 irq 26
ata6: SATA max UDMA/133 abar m2048@0xfeb6a000 port 0xfeb6a380 irq 26
usb 2-1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Optical Mouse
usb 2-1: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/0003:093A:2510.0001/input/input3
hid-generic 0003:093A:2510.0001: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:13.0-1/input0
e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 6c:b3:11:0f:c2:4a
e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: E42641-005
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
usb 1-5: new full-speed USB device number 3 using ohci-pci
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATA-8: TOSHIBA HDWD110, MS2OA8R0, max UDMA/133
ata2.00: ATA-11: WDC WDS500G2B0A, X61190WD, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata1.00: ATAPI: ASUS BW-16D1HT, 3.03, max UDMA/133
ata6.00: configured for UDMA/133
ata2.00: Features: Dev-Sleep
ata1.00: configured for UDMA/133
scsi 0:0:0:0: CD-ROM ASUS BW-16D1HT 3.03 PQ: 0 ANSI: 5
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WDS500G2B0A 90WD PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
scsi 6:0:0:0: Direct-Access ATA TOSHIBA HDWD110 A8R0 PQ: 0 ANSI: 5
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 6:0:0:0: [sdb] 4096-byte physical blocks
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI disk
e1000e 0000:01:00.0 enp1s0: renamed from eth0
sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
usb 1-5: New USB device found, idVendor=0458, idProduct=7061, bcdDevice=10.06
usb 1-5: New USB device strings: Mfr=16, Product=96, SerialNumber=0
usb 1-5: Product: iLook 1321 V2
usb 1-5: Manufacturer: iLook 1321 V2
sr 0:0:0:0: Attached scsi CD-ROM sr0
usb 1-4: USB disconnect, device number 2
usb 1-5: USB disconnect, device number 3
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb68000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 6.1.24k8small ehci_hcd
usb usb4: SerialNumber: 0000:00:12.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5
usbcore: registered new interface driver uas
xhci_hcd 0000:03:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000001100000090
xhci_hcd 0000:03:00.0: xHCI Host Controller
usb 2-1: USB disconnect, device number 2
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 6.1.24k8small xhci-hcd
usb usb5: SerialNumber: 0000:03:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 6.1.24k8small xhci-hcd
usb usb6: SerialNumber: 0000:03:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb66000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 6.1.24k8small ehci_hcd
usb usb7: SerialNumber: 0000:00:13.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 8
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb64000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 6.1.24k8small ehci_hcd
usb usb8: SerialNumber: 0000:00:16.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 4 ports detected
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb 4-5: new high-speed USB device number 3 using ehci-pci
usb 5-1: new high-speed USB device number 2 using xhci_hcd
usb 1-4: new full-speed USB device number 4 using ohci-pci
usb 5-1: New USB device found, idVendor=05e3, idProduct=0606, bcdDevice= 7.02
usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-1: Product: USB2.0 Hub
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
usb 1-4: New USB device found, idVendor=058f, idProduct=9360, bcdDevice= 1.00
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: USB Reader
usb 1-4: Manufacturer:
usb 1-4: SerialNumber: 2004888
usb-storage 1-4:1.0: USB Mass Storage device detected
scsi host5: usb-storage 1-4:1.0
usb 2-1: new low-speed USB device number 3 using ohci-pci
usb 5-2: new high-speed USB device number 3 using xhci_hcd
usb 4-5: New USB device found, idVendor=0458, idProduct=7061, bcdDevice=10.06
usb 4-5: New USB device strings: Mfr=16, Product=96, SerialNumber=0
usb 4-5: Product: iLook 1321 V2
usb 4-5: Manufacturer: iLook 1321 V2
usb 2-1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Optical Mouse
usb 2-1: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/0003:093A:2510.0002/input/input4
hid-generic 0003:093A:2510.0002: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:13.0-1/input0
usb 5-2: config 1 interface 0 altsetting 0 endpoint 0x83 has an invalid bInterval 32, changing to 9
usb 5-2: New USB device found, idVendor=1b3f, idProduct=2247, bcdDevice= 1.00
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 5-2: Product: GENERAL WEBCAM
usb 5-2: Manufacturer: GENERAL
usb 5-2: SerialNumber: JH0319_20200710_v012
raid6: sse2x4 gen() 11078 MB/s
raid6: sse2x2 gen() 8075 MB/s
raid6: sse2x1 gen() 5636 MB/s
raid6: using algorithm sse2x4 gen() 11078 MB/s
raid6: .... xor() 2282 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
async_tx: api initialized (async)
xor: automatically using best checksumming function avx
EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
systemd[1]: systemd 252.6-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Hostname set to .
scsi 5:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 5:0:0:0: [sdc] Media removed, stopped polling
sd 5:0:0:0: [sdc] Attached SCSI removable disk
scsi 5:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
sd 5:0:0:1: [sdd] Media removed, stopped polling
sd 5:0:0:1: [sdd] Attached SCSI removable disk
scsi 5:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 5:0:0:2: [sde] Media removed, stopped polling
sd 5:0:0:2: [sde] Attached SCSI removable disk
scsi 5:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 5:0:0:3: [sdf] Media removed, stopped polling
sd 5:0:0:3: [sdf] Attached SCSI removable disk
systemd[1]: Queued start job for default target graphical.target.
systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
systemd[1]: Created slice user.slice - User and Session Slice.
systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket.
systemd[1]: Listening on syslog.socket - Syslog Socket.
systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
systemd[1]: systemd-journald-audit.socket - Journal Audit Socket was skipped because of an unmet condition check (ConditionSecurity=audit).
systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
systemd[1]: Listening on systemd-journald.socket - Journal Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing).
systemd[1]: Starting ifupdown-wait-online.service - Wait for network to be configured by ifupdown...
systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: Starting [email protected] - Load Kernel Module configfs...
systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
systemd[1]: Starting [email protected] - Load Kernel Module drm...
systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
systemd[1]: Starting [email protected] - Load Kernel Module fuse...
systemd[1]: Starting [email protected] - Load Kernel Module loop...
systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
systemd[1]: Starting systemd-journald.service - Journal Service...
device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected]
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
fuse: init (API version 7.37)
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module configfs.
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module drm.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module fuse.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module loop.
systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
EXT4-fs (sda1): re-mounted. Quota mode: none.
systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
systemd[1]: Starting systemd-sysusers.service - Create System Users...
systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
systemd[1]: Started systemd-journald.service - Journal Service.
systemd-journald[1090]: Received client request to flush runtime journal.
random: crng init done
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:1: Attached scsi generic sg4 type 0
sd 5:0:0:2: Attached scsi generic sg5 type 0
sd 5:0:0:3: Attached scsi generic sg6 type 0
Adding 71679996k swap on /dev/sda2. Priority:-2 extents:1 across:71679996k SS
ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
ACPI: video: Video Device [VGA1] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:1c/LNXVIDEO:01/input/input6
usb 4-5: current rate 15872 is different from the runtime rate 16000
usb 4-5: current rate 47872 is different from the runtime rate 48000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[drm] radeon kernel modesetting enabled.
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
radeon 0000:00:01.0: vgaarb: deactivate vga console
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (KAVERI 0x1002:0x130F 0x1043:0x85CB 0xD4).
[drm] doorbell mmio base: 0xF0000000
[drm] doorbell mmio size: 8388608
ATOM BIOS: 113
radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading kaveri Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] Found UVD firmware Version: 1.64 Family ID: 9
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 524288, num gpu pages 524288
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
usb 4-5: Found UVC 1.00 device iLook 1321 V2 (0458:7061)
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
usb 5-2: Warning! Unlikely big volume range (=5120), cval->res is probably wrong.
usb 5-2: [5] FU [Mic Capture Volume] ch = 1, val = 7680/12800/1
[drm] ring test on 1 succeeded in 3 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
usbcore: registered new interface driver snd-usb-audio
input: iLook 1321 V2: iLook 1321 V2 as /devices/pci0000:00/0000:00:12.2/usb4/4-5/4-5:1.0/input/input12
usb 5-2: Found UVC 1.00 device GENERAL WEBCAM (1b3f:2247)
usb 5-2: Failed to query (GET_INFO) UVC control 2 on unit 1: -32 (exp. 1).
usb 5-2: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
input: GENERAL WEBCAM: GENERAL WEBCAM as /devices/pci0000:00/0000:00:15.0/0000:03:00.0/usb5/5-2/5-2:1.0/input/input13
usbcore: registered new interface driver uvcvideo
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 15 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Quota mode: none.
serial 0000:02:05.0: LSR safety check engaged!
serial 0000:02:05.0: LSR safety check engaged!
serial 0000:02:05.1: LSR safety check engaged!
serial 0000:02:05.1: LSR safety check engaged!
sm3_avx_x86_64: BMI2 instruction are not detected.
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] VGA-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] CRT1: INTERNAL_UNIPHY3
[drm] CRT1: NUTMEG
[drm] fb mappable at 0xE0731000
[drm] vram apper at 0xE0000000
[drm] size 7299072
[drm] fb depth is 24
[drm] pitch is 6912
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
radeon 0000:00:01.0: [drm] fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[drm] amdgpu kernel modesetting enabled.
amdgpu: CRAT table disabled by module option
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
8021q: adding VLAN 0 to HW filter on device enp1s0
usb 4-5: current rate 47872 is different from the runtime rate 48000
usb 4-5: current rate 47872 is different from the runtime rate 48000
e1000e 0000:01:00.0 enp1s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
usb 5-2: Failed to query (GET_DEF) UVC control 2 on unit 1: -32 (exp. 1).
usb 5-2: Failed to query (GET_DEF) UVC control 2 on unit 1: -32 (exp. 1).
usb 4-5: current rate 47872 is different from the runtime rate 48000
usb 4-5: current rate 47872 is different from the runtime rate 48000
usb 5-2: Failed to query (GET_DEF) UVC control 2 on unit 1: -32 (exp. 1).
usb 5-2: Failed to query (GET_DEF) UVC control 2 on unit 1: -32 (exp. 1).
traps: light-locker[3520] trap int3 ip:7f1d68ec57d7 sp:7ffe51e3fdb0 error:0 in libglib-2.0.so.0.7400.6[7f1d68e87000+8d000]
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP socket layer initialized