dmesg - ftest
Linux version 6.0.0-kali3-amd64 (devel@kali.org) (gcc-12 (Debian 12.2.0-3) 12.2.0, GNU ld (GNU Binutils for Debian) 2.39) #1 SMP PREEMPT_DYNAMIC Debian 6.0.7-1kali1 (2022-11-07)
Command line: BOOT_IMAGE=/live/vmlinuz-6.0.0-kali3-amd64 boot=live persistence components quiet splash noeject findiso= persistence
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
signal: max sigframe size: 1776
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008ffff] usable
BIOS-e820: [mem 0x0000000000090000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000cfec2fff] usable
BIOS-e820: [mem 0x00000000cfec3000-0x00000000d00c4fff] reserved
BIOS-e820: [mem 0x00000000d00c5000-0x00000000d684efff] usable
BIOS-e820: [mem 0x00000000d684f000-0x00000000d6a4efff] type 20
BIOS-e820: [mem 0x00000000d6a4f000-0x00000000dae9efff] reserved
BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
BIOS-e820: [mem 0x000000021e600000-0x000000021e7fffff] reserved
NX (Execute Disable) protection: active
efi: EFI v2.31 by Lenovo
efi: ACPI 2.0=0xdaffe014 ACPI=0xdaffe000 SMBIOS=0xdae9e000
secureboot: Secure boot disabled
SMBIOS 2.7 present.
DMI: LENOVO 23252FG/23252FG, BIOS G2ETB7WW (2.77 ) 09/24/2019
tsc: Fast TSC calibration using PIT
tsc: Detected 2494.160 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x21e600 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0xdb000 max_arch_pfn = 0x400000000
RAMDISK: [mem 0x2df37000-0x32f92fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DAFFE014 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000DAFFE170 0000C4 (v01 LENOVO TP-G2 00002770 PTL 00000002)
ACPI: FACP 0x00000000DAFE5000 00010C (v05 LENOVO TP-G2 00002770 PTL 00000002)
ACPI: DSDT 0x00000000DAFE7000 011383 (v01 LENOVO TP-G2 00002770 INTL 20061109)
ACPI: FACS 0x00000000DAF5A000 000040
ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-G2 00002770 PTL 00000001)
ACPI: TCPA 0x00000000DAFFC000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: SSDT 0x00000000DAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
ACPI: SSDT 0x00000000DAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
ACPI: SSDT 0x00000000DAFF9000 0007A8 (v01 LENOVO SataAhci 00001000 INTL 20061109)
ACPI: HPET 0x00000000DAFE3000 000038 (v01 LENOVO TP-G2 00002770 PTL 00000002)
ACPI: APIC 0x00000000DAFE2000 000098 (v01 LENOVO TP-G2 00002770 PTL 00000002)
ACPI: MCFG 0x00000000DAFE1000 00003C (v01 LENOVO TP-G2 00002770 PTL 00000002)
ACPI: ECDT 0x00000000DAFE0000 000052 (v01 LENOVO TP-G2 00002770 PTL 00000002)
ACPI: FPDT 0x00000000DAFDF000 000064 (v01 LENOVO TP-G2 00002770 PTL 00000002)
ACPI: ASF! 0x00000000DAFE6000 0000A5 (v32 LENOVO TP-G2 00002770 PTL 00000002)
ACPI: UEFI 0x00000000DAFDE000 00003E (v01 LENOVO TP-G2 00002770 PTL 00000002)
ACPI: UEFI 0x00000000DAFDD000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: POAT 0x00000000DAFDC000 000055 (v03 LENOVO TP-G2 00002770 PTL 00000002)
ACPI: SSDT 0x00000000DAFDB000 000C37 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 0x00000000DAFDA000 000A83 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: SSDT 0x00000000DAFD9000 0000D0 (v01 LENOVO IffsAsl 00003000 INTL 20061109)
ACPI: UEFI 0x00000000DAFD8000 000292 (v01 LENOVO TP-G2 00002770 PTL 00000002)
ACPI: DBG2 0x00000000DAFD7000 0000E9 (v00 LENOVO TP-G2 00002770 PTL 00000002)
ACPI: Reserving FACP table memory at [mem 0xdafe5000-0xdafe510b]
ACPI: Reserving DSDT table memory at [mem 0xdafe7000-0xdaff8382]
ACPI: Reserving FACS table memory at [mem 0xdaf5a000-0xdaf5a03f]
ACPI: Reserving SLIC table memory at [mem 0xdaffd000-0xdaffd175]
ACPI: Reserving TCPA table memory at [mem 0xdaffc000-0xdaffc031]
ACPI: Reserving SSDT table memory at [mem 0xdaffb000-0xdaffb407]
ACPI: Reserving SSDT table memory at [mem 0xdaffa000-0xdaffa032]
ACPI: Reserving SSDT table memory at [mem 0xdaff9000-0xdaff97a7]
ACPI: Reserving HPET table memory at [mem 0xdafe3000-0xdafe3037]
ACPI: Reserving APIC table memory at [mem 0xdafe2000-0xdafe2097]
ACPI: Reserving MCFG table memory at [mem 0xdafe1000-0xdafe103b]
ACPI: Reserving ECDT table memory at [mem 0xdafe0000-0xdafe0051]
ACPI: Reserving FPDT table memory at [mem 0xdafdf000-0xdafdf063]
ACPI: Reserving ASF! table memory at [mem 0xdafe6000-0xdafe60a4]
ACPI: Reserving UEFI table memory at [mem 0xdafde000-0xdafde03d]
ACPI: Reserving UEFI table memory at [mem 0xdafdd000-0xdafdd041]
ACPI: Reserving POAT table memory at [mem 0xdafdc000-0xdafdc054]
ACPI: Reserving SSDT table memory at [mem 0xdafdb000-0xdafdbc36]
ACPI: Reserving SSDT table memory at [mem 0xdafda000-0xdafdaa82]
ACPI: Reserving SSDT table memory at [mem 0xdafd9000-0xdafd90cf]
ACPI: Reserving UEFI table memory at [mem 0xdafd8000-0xdafd8291]
ACPI: Reserving DBG2 table memory at [mem 0xdafd7000-0xdafd70e8]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021e5fffff]
NODE_DATA(0) allocated [mem 0x21e5d0000-0x21e5fafff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021e5fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000008ffff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x0000000040003fff]
node 0: [mem 0x0000000040005000-0x00000000cfec2fff]
node 0: [mem 0x00000000d00c5000-0x00000000d684efff]
node 0: [mem 0x00000000dafff000-0x00000000daffffff]
node 0: [mem 0x0000000100000000-0x000000021e5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021e5fffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 112 pages in unavailable ranges
On node 0, zone DMA32: 512 pages in unavailable ranges
On node 0, zone DMA32: 1 pages in unavailable ranges
On node 0, zone DMA32: 514 pages in unavailable ranges
On node 0, zone DMA32: 18352 pages in unavailable ranges
On node 0, zone Normal: 20480 pages in unavailable ranges
On node 0, zone Normal: 6656 pages in unavailable ranges
Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x00090000-0x000bffff]
PM: hibernation: Registered nosave memory: [mem 0x000c0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: hibernation: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: hibernation: Registered nosave memory: [mem 0xcfec3000-0xd00c4fff]
PM: hibernation: Registered nosave memory: [mem 0xd684f000-0xd6a4efff]
PM: hibernation: Registered nosave memory: [mem 0xd6a4f000-0xdae9efff]
PM: hibernation: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
PM: hibernation: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
PM: hibernation: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
PM: hibernation: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff]
PM: hibernation: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
PM: hibernation: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[mem 0xdfa00000-0xf80f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 2018323
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/live/vmlinuz-6.0.0-kali3-amd64 boot=live persistence components quiet splash noeject findiso= persistence
Unknown kernel command line parameters "persistence components splash noeject persistence BOOT_IMAGE=/live/vmlinuz-6.0.0-kali3-amd64 boot=live findiso=", will be passed to user space.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:all(zero), heap alloc:on, heap free:off
software IO TLB: area num 8.
Memory: 3375164K/8202096K available (12294K kernel code, 2263K rwdata, 8856K rodata, 2736K init, 5404K bss, 412120K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 39252 entries in 154 pages
ftrace: allocated 154 pages with 4 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
random: crng init done
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20220331
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f3acbbb5c, max_idle_ns: 440795202126 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.32 BogoMIPS (lpj=9976640)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
landlock: Up and running.
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor initialized
TOMOYO Linux initialized
LSM support for eBPF active
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
x86/cpu: VMX (outside TXT) disabled by BIOS
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
MDS: Mitigation: Clear CPU buffers
MMIO Stale Data: Unknown: No mitigations
SRBDS: Vulnerable: No microcode
Freeing SMP alternatives memory: 32K
smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (family: 0x6, model: 0x3a, stepping: 0x9)
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 3 and lim to 1.
cblist_init_generic: Setting shift to 3 and lim to 1.
cblist_init_generic: Setting shift to 3 and lim to 1.
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Estimated ratio of average max frequency by base frequency (times 1024): 1187
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
MDS CPU bug present and SMT on, data leak possible. See for more details.
#2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 4 processors activated (19953.28 BogoMIPS)
node 0 deferred pages initialised in 8ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1674505424.064:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 7 ACPI AML tables successfully acquired and loaded
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: Boot ECDT EC used to handle transactions
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF988D80968000 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF988D80CD5400 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF988D80C27600 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: PM: Power Resource [PUBS]
acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
ACPI: PCI: Interrupt link LNKA configured for IRQ 11
ACPI: PCI: Interrupt link LNKB configured for IRQ 0
ACPI: PCI: Interrupt link LNKB disabled
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKC disabled
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKD disabled
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKE disabled
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKF disabled
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKG disabled
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
ACPI: PCI: Interrupt link LNKH disabled
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_SUPPORT)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
pci_bus 0000:00: root bus resource [bus 00-3f]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf2520000-0xf252ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf2535000-0xf253500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf253b000-0xf253bfff]
pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf253a000-0xf253a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf2530000-0xf2533fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf2539000-0xf25393ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af]
pci 0000:00:1f.2: reg 0x14: [io 0x60b4-0x60b7]
pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7]
pci 0000:00:1f.2: reg 0x1c: [io 0x60b0-0x60b3]
pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf2538000-0xf25387ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf2534000-0xf25340ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:02:00.0: [1180:e823] type 00 class 0x088001
pci 0000:02:00.0: reg 0x10: [mem 0xf1d00000-0xf1d000ff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf1c00000-0xf1c01fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff]
acpiphp: Slot [1] registered
pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x11
ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete
ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xcfec3000-0xcfffffff]
e820: reserve RAM buffer [mem 0xd684f000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: bridge control possible
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: disabling [mem 0x000c0000-0x000c3fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
pnp 00:00: disabling [mem 0x000c4000-0x000c7fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
pnp 00:00: disabling [mem 0x000c8000-0x000cbfff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
pnp 00:00: disabling [mem 0x000cc000-0x000cffff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
pnp 00:00: disabling [mem 0x000d0000-0x000d3fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
pnp 00:00: disabling [mem 0x000d4000-0x000d7fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
pnp 00:00: disabling [mem 0x000d8000-0x000dbfff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
pnp 00:00: disabling [mem 0x000dc000-0x000dffff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] has been reserved
system 00:00: [mem 0x000e4000-0x000e7fff] has been reserved
system 00:00: [mem 0x000e8000-0x000ebfff] has been reserved
system 00:00: [mem 0x000ec000-0x000effff] has been reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] has been reserved
pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x167f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
system 00:01: [mem 0xfffff000-0xffffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff]
pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:02: resource 1 [mem 0xf1d00000-0xf24fffff]
pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf1c00000-0xf1cfffff]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xf1400000-0xf1bfffff]
pci_bus 0000:04: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000c9b24000-0x00000000cdb24000] (64MB)
Trying to unpack rootfs image as initramfs...
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 82288K
alg: self-tests for CTR-KDF (hmac(sha256)) passed
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: thermal: Thermal Zone [THM0] (68 C)
Linux agpgart interface v0.103
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2023-01-23T20:23:45 UTC (1674505425)
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 1216k, total 1216k
efifb: mode is 640x480x32, linelength=2560, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x30
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
fb0: EFI VGA frame buffer device
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
mip6: Mobile IPv6
NET: Registered PF_PACKET protocol family
mpls_gso: MPLS GSO support
microcode: sig=0x306a9, pf=0x10, revision=0x21
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1074309710, 285407)->(1095435470, -20840353)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Couldn't parse dbx signatures: -74
ima: Allocated hash algorithm: sha256
tsc: Refined TSC clocksource calibration: 2494.333 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns
clocksource: Switched to clocksource tsc
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64 (disabled)
evm: security.SMACK64EXEC (disabled)
evm: security.SMACK64TRANSMUTE (disabled)
evm: security.SMACK64MMAP (disabled)
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 2736K
Write protecting the kernel read-only data: 24576k
Freeing unused kernel image (text/rodata gap) memory: 2040K
Freeing unused kernel image (rodata/data gap) memory: 1384K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
persistence
components
splash
noeject
persistence
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/live/vmlinuz-6.0.0-kali3-amd64
boot=live
findiso=
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: button: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
ACPI: button: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: button: Power Button [PWRF]
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20220331/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20220331/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20220331/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20220331/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
lpc_ich: Resource conflict(s) found affecting gpio_ich
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
ACPI: battery: Slot [BAT0] (battery present)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: bus type drm_connector registered
PTP clock support registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
i2c i2c-0: 2/2 memory slots populated (from DMI)
i2c i2c-0: Successfully instantiated SPD at 0x50
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
i2c i2c-0: Successfully instantiated SPD at 0x51
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 6.0.0-kali3-amd64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.00
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.0.0-kali3-amd64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
cryptd: max_cpu_qlen set to 1000
ehci-pci 0000:00:1a.0: EHCI Host Controller
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e823] (rev 4)
SCSI subsystem initialized
mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf253a000
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 6.0.0-kali3-amd64 ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2539000
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 6.0.0-kali3-amd64 ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538100 irq 26
ata2: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538180 irq 26
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538300 irq 26
ata6: DUMMY
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:25:fa:30
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-2: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: SanDisk 3.2Gen1
usb 2-2: Manufacturer: USB
usb 2-2: SerialNumber: 04011b6ca74c7c6cf89a4f5ca96bb13a9833e88ef0e1b0d6fc52d52211f65ca4c22000000000000000000000e532909aff939418815581079cac3157
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-2:1.0
usbcore: registered new interface driver usb-storage
[drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
ACPI: video: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out
ata1.00: ATA-11: KINGSTON SUV400S37120G, 0C3K87RA, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SUV400S 87RA PQ: 0 ANSI: 5
usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
usb 1-4: new high-speed USB device number 2 using xhci_hcd
fbcon: i915drmfb (fb0) is primary device
usb 1-4: New USB device found, idVendor=0bdb, idProduct=1926, bcdDevice= 0.00
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: H5321 gw
usb 1-4: Manufacturer: Lenovo
usb 1-4: SerialNumber: B99F66697134E0E0
ata2: SATA link down (SStatus 0 SControl 300)
usb 3-1.2: new full-speed USB device number 3 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
usb 3-1.2: New USB device found, idVendor=25a7, idProduct=fa23, bcdDevice= 2.41
usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.2: Product: 2.4G Receiver
usb 3-1.2: Manufacturer: Compx
hid: raw HID events driver (C) Jiri Kosina
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
usb 3-1.3: new full-speed USB device number 4 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
usb 3-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.3: Product: Biometric Coprocessor
usb 3-1.3: Manufacturer: Auth
usb 3-1.4: new full-speed USB device number 5 using ehci-pci
usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.4: Product: BCM20702A0
usb 3-1.4: Manufacturer: Broadcom Corp
usb 3-1.4: SerialNumber: E006E6B9A85A
usb 3-1.6: new high-speed USB device number 6 using ehci-pci
scsi 6:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
usb 3-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.18
usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.6: Product: Integrated Camera
usb 3-1.6: Manufacturer: Chicony Electronics Co., Ltd.
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
usbcore: registered new interface driver uas
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:25A7:FA23.0001/input/input8
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
sd 6:0:0:0: [sdb] 60125184 512-byte logical blocks: (30.8 GB/28.7 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 6:0:0:0: [sdb] Attached SCSI removable disk
cdc_ncm 1-4:1.6: MAC-Address: 02:15:e0:ec:01:00
cdc_ncm 1-4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:14.0-4, Mobile Broadband Network Device, 02:15:e0:ec:01:00
usbcore: registered new interface driver cdc_ncm
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
hid-generic 0003:25A7:FA23.0001: input,hidraw0: USB HID v1.10 Keyboard [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.2/input0
input: Compx 2.4G Receiver Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:25A7:FA23.0002/input/input9
input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:25A7:FA23.0002/input/input10
input: Compx 2.4G Receiver Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:25A7:FA23.0002/input/input11
input: Compx 2.4G Receiver System Control as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:25A7:FA23.0002/input/input12
hid-generic 0003:25A7:FA23.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.2/input1
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
loop: module loaded
loop0: detected capacity change from 0 to 7009080
squashfs: version 4.0 (2009/01/31) Phillip Lougher
uhci_hcd: USB Universal Host Controller Interface driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
fuse: init (API version 7.36)
EXT4-fs (sdb2): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdb2): recovery complete
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Quota mode: none.
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 252.4-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Hostname set to .
systemd-gpt-auto-generator[822]: EFI loader partition unknown, exiting.
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice Slice /system/getty.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Integrity Protected Volumes.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target TLS tunnels for network services - per-config-file target.
systemd[1]: Reached target Swaps.
systemd[1]: Reached target System Time Set.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module efi_pstore...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
pstore: Using crash dump compression: deflate
systemd[1]: Starting Coldplug All udev Devices...
pstore: Registered efi as persistent store backend
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: modprobe@configfs.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@drm.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module efi_pstore.
systemd[1]: modprobe@fuse.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: VMware vmblock fuse mount was skipped because of an unmet condition check (ConditionVirtualization=vmware).
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
systemd-journald[861]: Received client request to flush runtime journal.
ACPI: AC: AC Adapter [AC] (on-line)
at24 0-0050: supply vcc not found, using dummy regulator
at24 0-0050: 256 byte spd EEPROM, read-only
at24 0-0051: supply vcc not found, using dummy regulator
at24 0-0051: 256 byte spd EEPROM, read-only
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 6:0:0:0: Attached scsi generic sg1 type 0
input: PC Speaker as /devices/platform/pcspkr/input/input14
iTCO_vendor_support: vendor-support=0
Non-volatile memory driver v1.3
iTCO_wdt iTCO_wdt.1.auto: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
thinkpad_acpi: ThinkPad ACPI Extras v0.26
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS G2ETB7WW (2.77 ), EC G2HT36WW
thinkpad_acpi: Lenovo ThinkPad X230, model 23252FG
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
thinkpad_acpi: secondary fan control detected & enabled
thinkpad_acpi: battery 1 registered (start 0, stop 100, behaviours: 0x7)
ACPI: battery: new extension: ThinkPad Battery Extension
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input15
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
cdc_acm 1-4:1.1: ttyACM0: USB ACM device
cdc_acm 1-4:1.3: ttyACM1: USB ACM device
cdc_wdm 1-4:1.5: cdc-wdm1: USB WDM device
cdc_wdm 1-4:1.8: cdc-wdm2: USB WDM device
usbcore: registered new interface driver cdc_wdm
cdc_acm 1-4:1.9: ttyACM2: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: RAPL package-0 domain package locked by BIOS
usbcore: registered new interface driver cdc_mbim
platform regulatory.0: firmware: direct-loading firmware regulatory.db
mc: Linux media interface: v0.10
platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
Intel(R) Wireless WiFi driver for Linux
iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
videodev: Linux video capture interface: v2.00
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
usb 3-1.6: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 6000g2a-6.ucode op_mode iwldvm
input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input24
usbcore: registered new interface driver uvcvideo
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
usbcore: registered new interface driver btusb
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: BCM: features 0x07
Bluetooth: hci0: BCM20702A
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0a5c-21e6.hcd (-2)
firmware_class: See for information about missing firmware
bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0a5c-21e6.hcd (-2)
bluetooth hci0: firmware: failed to load brcm/BCM-0a5c-21e6.hcd (-2)
bluetooth hci0: firmware: failed to load brcm/BCM-0a5c-21e6.hcd (-2)
Bluetooth: hci0: BCM: firmware Patch file not found, tried:
Bluetooth: hci0: BCM: 'brcm/BCM20702A1-0a5c-21e6.hcd'
Bluetooth: hci0: BCM: 'brcm/BCM-0a5c-21e6.hcd'
NET: Registered PF_QIPCRTR protocol family
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
wlan0: authenticate with 5c:a6:e6:0b:c9:38
wlan0: bad VHT capabilities, disabling VHT
wlan0: send auth to 5c:a6:e6:0b:c9:38 (try 1/3)
wlan0: authenticated
wlan0: waiting for beacon from 5c:a6:e6:0b:c9:38
wlan0: associate with 5c:a6:e6:0b:c9:38 (try 1/3)
wlan0: RX AssocResp from 5c:a6:e6:0b:c9:38 (capab=0x411 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
process 'kali/Downloads/Geekbench-5.5.0-Linux/geekbench_x86_64' started with executable stack
audit: type=1400 audit(1674506581.196:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=16051 comm="apparmor_parser"
audit: type=1400 audit(1674506581.276:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=16054 comm="apparmor_parser"
audit: type=1400 audit(1674506581.276:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=16054 comm="apparmor_parser"
systemd-gpt-auto-generator[16083]: EFI loader partition unknown, exiting.
audit: type=1400 audit(1674506582.360:5): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lsb_release" pid=16146 comm="apparmor_parser"
audit: type=1400 audit(1674506582.364:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="nvidia_modprobe" pid=16147 comm="apparmor_parser"
audit: type=1400 audit(1674506582.384:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="nvidia_modprobe//kmod" pid=16147 comm="apparmor_parser"
audit: type=1400 audit(1674506582.616:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=16149 comm="apparmor_parser"
audit: type=1400 audit(1674506582.616:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=16149 comm="apparmor_parser"
audit: type=1400 audit(1674506582.620:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=16149 comm="apparmor_parser"
audit: type=1400 audit(1674506582.708:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=16150 comm="apparmor_parser"
systemd-gpt-auto-generator[16230]: EFI loader partition unknown, exiting.
systemd-gpt-auto-generator[16680]: EFI loader partition unknown, exiting.
systemd-gpt-auto-generator[16742]: EFI loader partition unknown, exiting.
systemd-gpt-auto-generator[16800]: EFI loader partition unknown, exiting.