dmesg - test
microcode: microcode updated early to revision 0x26, date = 2019-11-12
Linux version 5.15.0-52-generic (buildd@lcy02-amd64-045) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #58~20.04.1-Ubuntu SMP Thu Oct 13 13:09:46 UTC 2022 (Ubuntu 5.15.0-52.58~20.04.1-generic 5.15.60)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
signal: max sigframe size: 1776
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000d6f99fff] usable
BIOS-e820: [mem 0x00000000d6f9a000-0x00000000d7274fff] reserved
BIOS-e820: [mem 0x00000000d7275000-0x00000000db1fdfff] usable
BIOS-e820: [mem 0x00000000db1fe000-0x00000000dbc5efff] reserved
BIOS-e820: [mem 0x00000000dbc5f000-0x00000000dbfcdfff] usable
BIOS-e820: [mem 0x00000000dbfce000-0x00000000dcd50fff] ACPI NVS
BIOS-e820: [mem 0x00000000dcd51000-0x00000000dcffdfff] reserved
BIOS-e820: [mem 0x00000000dcffe000-0x00000000dcffefff] usable
BIOS-e820: [mem 0x00000000dd800000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xd612d018-0xd613d057] usable ==> usable
e820: update [mem 0xd612d018-0xd613d057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000d612d017] usable
reserve setup_data: [mem 0x00000000d612d018-0x00000000d613d057] usable
reserve setup_data: [mem 0x00000000d613d058-0x00000000d6f99fff] usable
reserve setup_data: [mem 0x00000000d6f9a000-0x00000000d7274fff] reserved
reserve setup_data: [mem 0x00000000d7275000-0x00000000db1fdfff] usable
reserve setup_data: [mem 0x00000000db1fe000-0x00000000dbc5efff] reserved
reserve setup_data: [mem 0x00000000dbc5f000-0x00000000dbfcdfff] usable
reserve setup_data: [mem 0x00000000dbfce000-0x00000000dcd50fff] ACPI NVS
reserve setup_data: [mem 0x00000000dcd51000-0x00000000dcffdfff] reserved
reserve setup_data: [mem 0x00000000dcffe000-0x00000000dcffefff] usable
reserve setup_data: [mem 0x00000000dd800000-0x00000000df9fffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000011f5fffff] usable
efi: EFI v2.40 by American Megatrends
efi: ESRT=0xdcfa8118 ACPI=0xdc714000 ACPI 2.0=0xdc714000 SMBIOS=0xf05b0 MOKvar=0xd9726000
secureboot: Secure boot disabled
SMBIOS 2.8 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./CRESCENTBAY, BIOS 5.6.5 06/03/2021
tsc: Fast TSC calibration using PIT
tsc: Detected 2593.974 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x11f600 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 4038M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
last_pfn = 0xdcfff max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd870-0x000fd87f]
esrt: Reserving ESRT space from 0x00000000dcfa8118 to 0x00000000dcfa8150.
e820: update [mem 0xd9726000-0xd9726fff] usable ==> reserved
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x3c1bd000-0x3fffdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DC714000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DC714090 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DC728578 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DC7141C0 0143B6 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DCD4FF80 000040
ACPI: APIC 0x00000000DC728688 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DC728710 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DC728758 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DC7287F8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DC728838 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DC728870 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DC728B88 000042 (v01 00000000 00000000)
ACPI: SSDT 0x00000000DC728BD0 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
ACPI: ASF! 0x00000000DC729850 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: SSDT 0x00000000DC7298F0 000539 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: SSDT 0x00000000DC729E30 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: SSDT 0x00000000DC72A9A8 005D51 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: DMAR 0x00000000DC730700 0000D4 (v01 INTEL BDW 00000001 INTL 00000001)
ACPI: BGRT 0x00000000DC7307D8 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Reserving FACP table memory at [mem 0xdc728578-0xdc728683]
ACPI: Reserving DSDT table memory at [mem 0xdc7141c0-0xdc728575]
ACPI: Reserving FACS table memory at [mem 0xdcd4ff80-0xdcd4ffbf]
ACPI: Reserving APIC table memory at [mem 0xdc728688-0xdc72870b]
ACPI: Reserving FPDT table memory at [mem 0xdc728710-0xdc728753]
ACPI: Reserving FIDT table memory at [mem 0xdc728758-0xdc7287f3]
ACPI: Reserving MCFG table memory at [mem 0xdc7287f8-0xdc728833]
ACPI: Reserving HPET table memory at [mem 0xdc728838-0xdc72886f]
ACPI: Reserving SSDT table memory at [mem 0xdc728870-0xdc728b84]
ACPI: Reserving UEFI table memory at [mem 0xdc728b88-0xdc728bc9]
ACPI: Reserving SSDT table memory at [mem 0xdc728bd0-0xdc72984c]
ACPI: Reserving ASF! table memory at [mem 0xdc729850-0xdc7298ef]
ACPI: Reserving SSDT table memory at [mem 0xdc7298f0-0xdc729e28]
ACPI: Reserving SSDT table memory at [mem 0xdc729e30-0xdc72a9a3]
ACPI: Reserving SSDT table memory at [mem 0xdc72a9a8-0xdc7306f8]
ACPI: Reserving DMAR table memory at [mem 0xdc730700-0xdc7307d3]
ACPI: Reserving BGRT table memory at [mem 0xdc7307d8-0xdc73080f]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
NODE_DATA(0) allocated [mem 0x11f5d6000-0x11f5fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000011f5fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000d6f99fff]
node 0: [mem 0x00000000d7275000-0x00000000db1fdfff]
node 0: [mem 0x00000000dbc5f000-0x00000000dbfcdfff]
node 0: [mem 0x00000000dcffe000-0x00000000dcffefff]
node 0: [mem 0x0000000100000000-0x000000011f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 97 pages in unavailable ranges
On node 0, zone DMA32: 731 pages in unavailable ranges
On node 0, zone DMA32: 2657 pages in unavailable ranges
On node 0, zone DMA32: 4144 pages in unavailable ranges
On node 0, zone Normal: 12289 pages in unavailable ranges
On node 0, zone Normal: 2560 pages in unavailable ranges
Reserving Intel graphics memory at [mem 0xdda00000-0xdf9fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x0])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x0])
ACPI: NMI not connected to LINT 1!
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
e820: update [mem 0xd888a000-0xd89e9fff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0xd612d000-0xd612dfff]
PM: hibernation: Registered nosave memory: [mem 0xd613d000-0xd613dfff]
PM: hibernation: Registered nosave memory: [mem 0xd6f9a000-0xd7274fff]
PM: hibernation: Registered nosave memory: [mem 0xd888a000-0xd89e9fff]
PM: hibernation: Registered nosave memory: [mem 0xd9726000-0xd9726fff]
PM: hibernation: Registered nosave memory: [mem 0xdb1fe000-0xdbc5efff]
PM: hibernation: Registered nosave memory: [mem 0xdbfce000-0xdcd50fff]
PM: hibernation: Registered nosave memory: [mem 0xdcd51000-0xdcffdfff]
PM: hibernation: Registered nosave memory: [mem 0xdcfff000-0xdd7fffff]
PM: hibernation: Registered nosave memory: [mem 0xdd800000-0xdf9fffff]
PM: hibernation: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xdfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u524288
pcpu-alloc: s208896 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 1009904
Policy zone: Normal
Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-52-generic", will be passed to user space.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 3782820K/4104384K available (16393K kernel code, 4373K rwdata, 10784K rodata, 3228K init, 6580K bss, 321304K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 50013 entries in 196 pages
ftrace: allocated 196 pages with 3 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
random: crng init done
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20210730
hpet: HPET dysfunctional in PC10. Force disabled.
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
DMAR: RMRR base: 0x000000dcf04000 end: 0x000000dcf12fff
DMAR: RMRR base: 0x000000dd800000 end: 0x000000df9fffff
DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2563ff63dd6, max_idle_ns: 440795237999 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.94 BogoMIPS (lpj=10375896)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
landlock: Up and running.
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
SRBDS: Mitigation: Microcode
Freeing SMP alternatives memory: 40K
smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1220
smpboot: CPU0: Intel(R) Core(TM) i5-4278U CPU @ 2.60GHz (family: 0x6, model: 0x45, stepping: 0x1)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2
MDS CPU bug present and SMT on, data leak possible. See for more details.
#3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (20751.79 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0xdbfce000-0xdcd50fff] (14168064 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 07:23:09, date: 2022-11-14
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1668410589.008:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Kprobes globally optimized
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9DB840E31000 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9DB840E0E000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9DB8401F4C00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: PM: Power Resource [PG00]
ACPI: PM: Power Resource [PG01]
ACPI: PM: Power Resource [PG02]
ACPI: PM: Power Resource [FN00]
ACPI: PM: Power Resource [FN01]
ACPI: PM: Power Resource [FN02]
ACPI: PM: Power Resource [FN03]
ACPI: PM: Power Resource [FN04]
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a2e] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7f14000-0xf7f17fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:9c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7f1a000-0xf7f1a3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7f19000-0xf7f197ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7f18000-0xf7f180ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:1539] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff]
pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe01f]
pci 0000:02:00.0: reg 0x1c: [mem 0xf7e20000-0xf7e23fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:03:00.0: [8086:1539] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:03:00.0: reg 0x1c: [mem 0xf7d20000-0xf7d23fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:04:00.0: [8086:08b1] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
ACPI: PCI: Interrupt link LNKA configured for IRQ 5
ACPI: PCI: Interrupt link LNKB configured for IRQ 5
ACPI: PCI: Interrupt link LNKC configured for IRQ 5
ACPI: PCI: Interrupt link LNKD configured for IRQ 5
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKE disabled
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKF disabled
ACPI: PCI: Interrupt link LNKG configured for IRQ 5
ACPI: PCI: Interrupt link LNKH configured for IRQ 5
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xd612d018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd6f9a000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd888a000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd9726000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb1fe000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdbfce000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdcfff000-0xdfffffff]
e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: [io 0x0a40-0x0a4f] has been reserved
pnp 00:01: [dma 0 disabled]
pnp 00:02: [dma 0 disabled]
ACPI: IRQ 6 override to edge, high
pnp 00:03: [dma 0 disabled]
ACPI: IRQ 7 override to edge, high
pnp 00:04: [dma 0 disabled]
ACPI: IRQ 10 override to edge, high
pnp 00:05: [dma 0 disabled]
ACPI: IRQ 11 override to edge, high
pnp 00:06: [dma 0 disabled]
system 00:07: [io 0x0680-0x069f] has been reserved
system 00:07: [io 0xffff] has been reserved
system 00:07: [io 0xffff] has been reserved
system 00:07: [io 0xffff] has been reserved
system 00:07: [io 0x1800-0x18fe] has been reserved
system 00:07: [io 0x164e-0x164f] has been reserved
system 00:09: [io 0x1854-0x1857] has been reserved
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:0a: [mem 0xf7ff0000-0xf7ffffff] has been reserved
pnp: PnP ACPI: found 12 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 32768 bind 32768)
MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
PCI: CLS 64 bytes, default 64
DMAR: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000cf28b000-0x00000000d328b000] (64MB)
Trying to unpack rootfs image as initramfs...
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.34)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
pcieport 0000:00:1c.0: PME: Signaling with IRQ 42
pcieport 0000:00:1c.2: PME: Signaling with IRQ 43
pcieport 0000:00:1c.3: PME: Signaling with IRQ 44
pcieport 0000:00:1c.5: PME: Signaling with IRQ 45
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: button: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: button: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: thermal: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: thermal: Thermal Zone [TZ01] (30 C)
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
00:03: ttyS2 at I/O 0x3e8 (irq = 6, base_baud = 115200) is a 16550A
00:04: ttyS3 at I/O 0x2e8 (irq = 7, base_baud = 115200) is a 16550A
00:05: ttyS4 at I/O 0x2f0 (irq = 10, base_baud = 115200) is a 16550A
00:06: ttyS5 at I/O 0x2e0 (irq = 11, base_baud = 115200) is a 16550A
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.103
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f1a000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.15.0-52-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:08: RTC can wake from S4
rtc_cmos 00:08: registered as rtc0
rtc_cmos 00:08: setting system clock to 2022-11-14T07:23:09 UTC (1668410589)
rtc_cmos 00:08: alarms up to one month, y3k, 242 bytes nvram
i2c_dev: i2c /dev entries driver
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
Freeing initrd memory: 63748K
ledtrig-cpu: registered to indicate activity on CPUs
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xe0000000, using 8100k, total 8100k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
Key type dns_resolver registered
microcode: sig=0x40651, pf=0x40, revision=0x26
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (433250419, 1803320)->(468343807, -33290068)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 0f7b019bb693b03ef7a18ddcd1f94e1a1ee0f5d4'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
blacklist: Loading compiled-in revocation X.509 certificates
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 0f7b019bb693b03ef7a18ddcd1f94e1a1ee0f5d4'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 14:645:369
RAS: Correctable Errors collector initialized.
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 3228K
Write protecting the kernel read-only data: 30720k
Freeing unused kernel image (text/rodata gap) memory: 2036K
Freeing unused kernel image (rodata/data gap) memory: 1504K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.15.0-52-generic
dca service started, version 1.12.1
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb 1-1: new high-speed USB device number 2 using ehci-pci
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.15.0-52-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
igb: Intel(R) Gigabit Ethernet Network Driver
igb: Copyright (c) 2007-2014 Intel Corporation.
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.15.0-52-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
ahci 0000:00:1f.2: version 3.0
i801_smbus 0000:00:1f.3: SPD Write Disable is set
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x2 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
i2c i2c-0: 1/2 memory slots populated (from DMI)
i2c i2c-0: Successfully instantiated SPD at 0x50
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
scsi host0: ahci
scsi host1: ahci
pps pps0: new PPS source ptp0
scsi host2: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xf7f19000 port 0xf7f19180 irq 52
ata3: DUMMY
igb 0000:02:00.0: added PHC on eth0
igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 20:90:27:e0:6d:1b
igb 0000:02:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:02:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
pps pps1: new PPS source ptp1
igb 0000:03:00.0: added PHC on eth1
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 20:90:27:e0:6d:1c
igb 0000:03:00.0: eth1: PBA No: FFFFFF-0FF
igb 0000:03:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:02:00.0 enp2s0: renamed from eth0
usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
usb 2-7: new full-speed USB device number 2 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2593.994 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256412811b4, max_idle_ns: 440795306987 ns
clocksource: Switched to clocksource tsc
usb 2-7: New USB device found, idVendor=0573, idProduct=1573, bcdDevice=80.07
usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-7: Product: USB Audio and HID
usb 2-7: Manufacturer: CSCTEK
usb 2-7: SerialNumber: A34004801402
usb 2-8: new high-speed USB device number 3 using xhci_hcd
usb 2-8: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=61.60
usb 2-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-8: Product: USB2.0 Hub
hub 2-8:1.0: USB hub found
hub 2-8:1.0: 4 ports detected
usb 2-8.1: new full-speed USB device number 4 using xhci_hcd
usb 2-8.1: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
usb 2-8.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-8.3: new full-speed USB device number 5 using xhci_hcd
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: Teclast 256GB SSD, HPS2227I, max UDMA/133
ata2.00: 500118192 sectors, multi 8: LBA48 NCQ (depth 32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Teclast 256GB SS 227I PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
igb 0000:03:00.0 enp3s0: renamed from eth1
hid: raw HID events driver (C) Jiri Kosina
usbhid 2-7:1.3: couldn't find an input interrupt endpoint
fbcon: Taking over console
Console: switching to colour frame buffer device 240x67
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 2-8.3: new high-speed USB device number 6 using xhci_hcd
usb 2-8.3: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
usb 2-8.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-8.3: Product: USB2.0 HUB
hub 2-8.3:1.0: USB hub found
hub 2-8.3:1.0: 4 ports detected
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 2-8.3.1: new full-speed USB device number 7 using xhci_hcd
systemd-rc-local-generator[246]: /etc/rc.local is not marked executable, skipping.
usb 2-8.3.1: New USB device found, idVendor=0b95, idProduct=6804, bcdDevice= 0.12
usb 2-8.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-8.3.1: Product: AX68004
usb 2-8.3.1: Manufacturer: ASIX Electronics
usb 2-8.3.1: SerialNumber: 00000001
hub 2-8.3.1:1.0: USB hub found
hub 2-8.3.1:1.0: 7 ports detected
systemd[1]: Configuration file /etc/systemd/system/runsunloginclient.service is marked executable. Please remove executable permission bits. Proceeding anyway.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro. Quota mode: none.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
systemd[1]: Activated swap /swapfile.
systemd[1]: Reached target Swap.
usb 2-8.3.2: new low-speed USB device number 8 using xhci_hcd
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Journal Service.
systemd-journald[258]: Received client request to flush runtime journal.
loop0: detected capacity change from 0 to 8
loop1: detected capacity change from 0 to 129520
loop2: detected capacity change from 0 to 709280
loop3: detected capacity change from 0 to 126792
loop4: detected capacity change from 0 to 509456
loop5: detected capacity change from 0 to 111080
loop6: detected capacity change from 0 to 89264
loop7: detected capacity change from 0 to 187776
loop10: detected capacity change from 0 to 94056
loop9: detected capacity change from 0 to 133552
loop8: detected capacity change from 0 to 98280
usb 2-8.3.2: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=49.00
usb 2-8.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-8.3.2: Product: USB Keyboard
usb 2-8.3.2: Manufacturer: Logitech
usb 2-8.3.3: new low-speed USB device number 9 using xhci_hcd
usb 2-8.3.3: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
usb 2-8.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-8.3.3: Product: USB Optical Mouse
usb 2-8.3.3: Manufacturer: Logitech
usb 2-8.3.4: new full-speed USB device number 10 using xhci_hcd
at24 0-0050: supply vcc not found, using dummy regulator
cfg80211: Loading compiled-in X.509 certificates for regulatory database
at24 0-0050: 256 byte spd EEPROM, read-only
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
usb 2-8.3.4: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64
usb 2-8.3.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-8.3.4: Product: USB Serial
pstore: Using crash dump compression: deflate
pstore: Registered efi as persistent store backend
mc: Linux media interface: v0.10
Intel(R) Wireless WiFi driver for Linux
iwlwifi 0000:04:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:04:00.0: loaded firmware version 17.3216344376.0 7260-17.ucode op_mode iwlmvm
snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: no codecs found!
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
usb 2-7: Warning! Unlikely big volume range (=511), cval->res is probably wrong.
usb 2-7: [5] FU [Mic Capture Volume] ch = 1, val = -8192/-1/16
usb 2-7: Warning! Unlikely big volume range (=896), cval->res is probably wrong.
usb 2-7: [6] FU [PCM Playback Volume] ch = 2, val = -16384/-2048/16
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
usbcore: registered new interface driver snd-usb-audio
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cryptd: max_cpu_qlen set to 1000
[drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:10: registered as cooling_device9
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
iwlwifi 0000:04:00.0: base HW address: a0:a8:cd:aa:c9:fe
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
usbcore: registered new interface driver btusb
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
Bluetooth: hci0: Legacy ROM 2.5 revision 8.0 build 2 week 3 2013
Bluetooth: hci0: Intel device is already patched. patch num: 57
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8.3/2-8.3.2/2-8.3.2:1.0/0003:046D:C31C.0001/input/input4
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input5
hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-8.3.2/input0
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8.3/2-8.3.2/2-8.3.2:1.1/0003:046D:C31C.0002/input/input10
input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
usbcore: registered new interface driver usbserial_generic
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-8.3.2/input1
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8.3/2-8.3.3/2-8.3.3:1.0/0003:046D:C077.0003/input/input11
hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-8.3.3/input0
iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
usbcore: registered new interface driver ch341
ch341 2-8.3.4:1.0: ch341-uart converter detected
usb 2-8.3.4: ch341-uart converter now attached to ttyUSB0
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
intel_rapl_common: RAPL package-0 domain package locked by BIOS
intel_rapl_common: RAPL package-0 domain dram locked by BIOS
audit: type=1400 audit(1668410594.941:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=545 comm="apparmor_parser"
audit: type=1400 audit(1668410594.941:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=544 comm="apparmor_parser"
audit: type=1400 audit(1668410594.945:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=546 comm="apparmor_parser"
audit: type=1400 audit(1668410594.945:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=546 comm="apparmor_parser"
audit: type=1400 audit(1668410594.957:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=549 comm="apparmor_parser"
audit: type=1400 audit(1668410594.957:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=547 comm="apparmor_parser"
audit: type=1400 audit(1668410594.965:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=542 comm="apparmor_parser"
audit: type=1400 audit(1668410594.981:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=554 comm="apparmor_parser"
audit: type=1400 audit(1668410594.981:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=554 comm="apparmor_parser"
audit: type=1400 audit(1668410594.985:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=548 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
NET: Registered PF_ALG protocol family
loop11: detected capacity change from 0 to 8
igb 0000:02:00.0 enp2s0: igb: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
wlp4s0: authenticate with a2:08:b9:06:33:c2
wlp4s0: send auth to a2:08:b9:06:33:c2 (try 1/3)
wlp4s0: authenticated
wlp4s0: associate with a2:08:b9:06:33:c2 (try 1/3)
wlp4s0: RX AssocResp from a2:08:b9:06:33:c2 (capab=0x431 status=0 aid=7)
wlp4s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
rfkill: input handler disabled
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler enabled
rfkill: input handler disabled
kauditd_printk_skb: 30 callbacks suppressed
audit: type=1400 audit(1668410719.060:42): apparmor="DENIED" operation="capable" profile="/snap/snapd/17336/usr/lib/snapd/snap-confine" pid=2121 comm="snap-confine" capability=4 capname="fsetid"
audit: type=1326 audit(1668410723.648:43): auid=1000 uid=1000 gid=1000 ses=3 subj=? pid=2121 comm="snap-store" exe="/snap/snap-store/599/usr/bin/snap-store" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7f811bdac73d code=0x50000
audit: type=1400 audit(1668410726.554:44): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=2121 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1668410726.598:45): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=2121 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1326 audit(1668410727.010:46): auid=1000 uid=1000 gid=1000 ses=3 subj=? pid=2121 comm="snap-store" exe="/snap/snap-store/599/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7f811bda339b code=0x50000
audit: type=1107 audit(1668410727.046:47): pid=588 uid=103 auid=4294967295 ses=4294967295 subj=? msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.12" pid=2121 label="snap.snap-store.ubuntu-software" peer_pid=601 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
audit: type=1420 audit(1668410727.046:48): subj_apparmor=unconfined
audit: type=1107 audit(1668410727.046:49): pid=588 uid=103 auid=4294967295 ses=4294967295 subj=? msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.12" pid=2121 label="snap.snap-store.ubuntu-software" peer_pid=601 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
audit: type=1420 audit(1668410727.046:50): subj_apparmor=unconfined
audit: type=1107 audit(1668410727.054:51): pid=588 uid=103 auid=4294967295 ses=4294967295 subj=? msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.12" pid=2121 label="snap.snap-store.ubuntu-software" peer_pid=601 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
audit: type=1420 audit(1668410727.054:52): subj_apparmor=unconfined
audit: type=1107 audit(1668410727.054:53): pid=588 uid=103 auid=4294967295 ses=4294967295 subj=? msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.12" pid=2121 label="snap.snap-store.ubuntu-software" peer_pid=601 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
kauditd_printk_skb: 3 callbacks suppressed
audit: type=1400 audit(1668411133.421:57): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=2121 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1668411133.665:58): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=2121 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1326 audit(1668411134.541:59): auid=1000 uid=1000 gid=1000 ses=3 subj=? pid=2121 comm="pool-org.gnome." exe="/snap/snap-store/599/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7f811bda339b code=0x50000
audit: type=1400 audit(1668411145.108:60): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=2121 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1668411145.336:61): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=2121 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1326 audit(1668411146.996:62): auid=1000 uid=1000 gid=1000 ses=3 subj=? pid=2121 comm="pool-org.gnome." exe="/snap/snap-store/599/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7f811bda339b code=0x50000
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
perf: interrupt took too long (2546 > 2500), lowering kernel.perf_event_max_sample_rate to 78500
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
perf: interrupt took too long (3185 > 3182), lowering kernel.perf_event_max_sample_rate to 62750
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
perf: interrupt took too long (3999 > 3981), lowering kernel.perf_event_max_sample_rate to 50000
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
perf: interrupt took too long (5056 > 4998), lowering kernel.perf_event_max_sample_rate to 39500
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
perf: interrupt took too long (6326 > 6320), lowering kernel.perf_event_max_sample_rate to 31500
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 2 (2447.000/0 MHz)
wlp4s0: AP a2:08:b9:06:33:c2 changed bandwidth, new config is 2437.000 MHz, width 1 (2437.000/0 MHz)