dmesg - bmcd-i5-7500T-sysbench
Linux version 5.10.0-16-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.127-2 (2022-07-23)
Command line: BOOT_IMAGE=/vmlinuz-5.10.0-16-amd64 root=/dev/mapper/g4ycyj2--vg-root ro quiet
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ba419fff] usable
BIOS-e820: [mem 0x00000000ba41a000-0x00000000ba41afff] ACPI NVS
BIOS-e820: [mem 0x00000000ba41b000-0x00000000ba41bfff] reserved
BIOS-e820: [mem 0x00000000ba41c000-0x00000000ca650fff] usable
BIOS-e820: [mem 0x00000000ca651000-0x00000000ca8befff] reserved
BIOS-e820: [mem 0x00000000ca8bf000-0x00000000ca904fff] ACPI data
BIOS-e820: [mem 0x00000000ca905000-0x00000000cb738fff] ACPI NVS
BIOS-e820: [mem 0x00000000cb739000-0x00000000cbcdafff] reserved
BIOS-e820: [mem 0x00000000cbcdb000-0x00000000cbdfefff] type 20
BIOS-e820: [mem 0x00000000cbdff000-0x00000000cbdfffff] usable
BIOS-e820: [mem 0x00000000cbe00000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000082dffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.60 by American Megatrends
efi: ACPI=0xca8cd000 ACPI 2.0=0xca8cd000 SMBIOS=0xf05e0 SMBIOS 3.0=0xf0600 TPMFinalLog=0xcb3dc000 ESRT=0xcbb2d698 MEMATTR=0xc7ec7018 MOKvar=0xc7eb5000
secureboot: Secure boot could not be determined (mode 0)
SMBIOS 3.0.0 present.
DMI: Dell Inc. OptiPlex 7050/0D24M8, BIOS 1.18.0 10/04/2021
tsc: Detected 2700.000 MHz processor
tsc: Detected 2699.909 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x82e000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask 7FE0000000 uncachable
1 base 00D0000000 mask 7FF0000000 uncachable
2 base 00CE000000 mask 7FFE000000 uncachable
3 base 00CD800000 mask 7FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0xcbe00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcec0-0x000fcecf]
esrt: Reserving ESRT space from 0x00000000cbb2d698 to 0x00000000cbb2d6d0.
e820: update [mem 0xc7eb5000-0xc7eb7fff] usable ==> reserved
Using GB pages for direct mapping
RAMDISK: [mem 0x3440b000-0x361fcfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000CA8CD000 000024 (v02 DELL )
ACPI: XSDT 0x00000000CA8CD0B8 0000F4 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x00000000CA8F8210 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x00000000CA8CD240 02AFCA (v02 DELL CBX3 01072009 INTL 20160422)
ACPI: FACS 0x00000000CB733F00 000040
ACPI: APIC 0x00000000CA8F8320 000084 (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x00000000CA8F83A8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FIDT 0x00000000CA8F83F0 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 0x00000000CA8F84A0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: HPET 0x00000000CA8F84E0 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
ACPI: SSDT 0x00000000CA8F8518 003176 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x00000000CA8FB690 0025A5 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x00000000CA8FDC38 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
ACPI: SSDT 0x00000000CA8FDC70 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x00000000CA8FEA58 000BB4 (v02 INTEL DELL_MFF 00000000 INTL 20160422)
ACPI: UEFI 0x00000000CA8FF610 000042 (v01 00000000 00000000)
ACPI: SSDT 0x00000000CA8FF658 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x00000000CA900538 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: SSDT 0x00000000CA9005D0 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
ACPI: SSDT 0x00000000CA900718 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x00000000CA9009B8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: SSDT 0x00000000CA9039C0 00050D (v02 INTEL TbtTypeC 00000000 INTL 20160422)
ACPI: DBGP 0x00000000CA903ED0 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x00000000CA903F08 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: MSDM 0x00000000CA903F60 000055 (v03 DELL CBX3 06222004 AMI 00010013)
ACPI: SLIC 0x00000000CA903FB8 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
ACPI: TPM2 0x00000000CA904130 000034 (v03 DELL CBX3 00000001 AMI 00000000)
ACPI: ASF! 0x00000000CA904168 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: BGRT 0x00000000CA904208 000038 (v00 \xf3\xee 01072009 AMI 00010013)
ACPI: DMAR 0x00000000CA904240 0000CC (v01 INTEL KBL 00000001 INTL 00000001)
ACPI: Reserving FACP table memory at [mem 0xca8f8210-0xca8f831b]
ACPI: Reserving DSDT table memory at [mem 0xca8cd240-0xca8f8209]
ACPI: Reserving FACS table memory at [mem 0xcb733f00-0xcb733f3f]
ACPI: Reserving APIC table memory at [mem 0xca8f8320-0xca8f83a3]
ACPI: Reserving FPDT table memory at [mem 0xca8f83a8-0xca8f83eb]
ACPI: Reserving FIDT table memory at [mem 0xca8f83f0-0xca8f849b]
ACPI: Reserving MCFG table memory at [mem 0xca8f84a0-0xca8f84db]
ACPI: Reserving HPET table memory at [mem 0xca8f84e0-0xca8f8517]
ACPI: Reserving SSDT table memory at [mem 0xca8f8518-0xca8fb68d]
ACPI: Reserving SSDT table memory at [mem 0xca8fb690-0xca8fdc34]
ACPI: Reserving HPET table memory at [mem 0xca8fdc38-0xca8fdc6f]
ACPI: Reserving SSDT table memory at [mem 0xca8fdc70-0xca8fea54]
ACPI: Reserving SSDT table memory at [mem 0xca8fea58-0xca8ff60b]
ACPI: Reserving UEFI table memory at [mem 0xca8ff610-0xca8ff651]
ACPI: Reserving SSDT table memory at [mem 0xca8ff658-0xca900535]
ACPI: Reserving LPIT table memory at [mem 0xca900538-0xca9005cb]
ACPI: Reserving SSDT table memory at [mem 0xca9005d0-0xca900710]
ACPI: Reserving SSDT table memory at [mem 0xca900718-0xca9009b6]
ACPI: Reserving SSDT table memory at [mem 0xca9009b8-0xca9039b9]
ACPI: Reserving SSDT table memory at [mem 0xca9039c0-0xca903ecc]
ACPI: Reserving DBGP table memory at [mem 0xca903ed0-0xca903f03]
ACPI: Reserving DBG2 table memory at [mem 0xca903f08-0xca903f5b]
ACPI: Reserving MSDM table memory at [mem 0xca903f60-0xca903fb4]
ACPI: Reserving SLIC table memory at [mem 0xca903fb8-0xca90412d]
ACPI: Reserving TPM2 table memory at [mem 0xca904130-0xca904163]
ACPI: Reserving ASF! table memory at [mem 0xca904168-0xca904207]
ACPI: Reserving BGRT table memory at [mem 0xca904208-0xca90423f]
ACPI: Reserving DMAR table memory at [mem 0xca904240-0xca90430b]
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000082dffffff]
NODE_DATA(0) allocated [mem 0x82dfd6000-0x82dffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000082dffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000ba419fff]
node 0: [mem 0x00000000ba41c000-0x00000000ca650fff]
node 0: [mem 0x00000000cbdff000-0x00000000cbdfffff]
node 0: [mem 0x0000000100000000-0x000000082dffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000082dffffff]
On node 0 totalpages: 8357357
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12890 pages used for memmap
DMA32 zone: 824912 pages, LIFO batch:63
Normal zone: 117632 pages used for memmap
Normal zone: 7528448 pages, LIFO batch:63
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 97 pages in unavailable ranges
On node 0, zone DMA32: 2 pages in unavailable ranges
On node 0, zone DMA32: 6062 pages in unavailable ranges
On node 0, zone Normal: 16896 pages in unavailable ranges
On node 0, zone Normal: 8192 pages in unavailable ranges
Reserving Intel graphics memory at [mem 0xce000000-0xcfffffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
e820: update [mem 0xc813e000-0xc813efff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0xba41a000-0xba41afff]
PM: hibernation: Registered nosave memory: [mem 0xba41b000-0xba41bfff]
PM: hibernation: Registered nosave memory: [mem 0xc7eb5000-0xc7eb7fff]
PM: hibernation: Registered nosave memory: [mem 0xc813e000-0xc813efff]
PM: hibernation: Registered nosave memory: [mem 0xca651000-0xca8befff]
PM: hibernation: Registered nosave memory: [mem 0xca8bf000-0xca904fff]
PM: hibernation: Registered nosave memory: [mem 0xca905000-0xcb738fff]
PM: hibernation: Registered nosave memory: [mem 0xcb739000-0xcbcdafff]
PM: hibernation: Registered nosave memory: [mem 0xcbcdb000-0xcbdfefff]
PM: hibernation: Registered nosave memory: [mem 0xcbe00000-0xcfffffff]
PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xd0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 58 pages/cpu s200664 r8192 d28712 u524288
pcpu-alloc: s200664 r8192 d28712 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 8226746
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-5.10.0-16-amd64 root=/dev/mapper/g4ycyj2--vg-root ro quiet
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 3086896K/33429428K available (12295K kernel code, 2536K rwdata, 7568K rodata, 2424K init, 3680K bss, 969432K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 36456 entries in 143 pages
ftrace: allocated 143 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
random: crng init done
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200925
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x000000ca712000 end: 0x000000ca731fff
DMAR: RMRR base: 0x000000cd800000 end: 0x000000cfffffff
DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26eae8729ef, max_idle_ns: 440795235156 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5399.81 BogoMIPS (lpj=10799636)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
TAA: Mitigation: Clear CPU buffers
MMIO Stale Data: Mitigation: Clear CPU buffers
SRBDS: Mitigation: Microcode
Freeing SMP alternatives memory: 32K
smpboot: CPU0: Intel(R) Core(TM) i5-7500T CPU @ 2.70GHz (family: 0x6, model: 0x9e, stepping: 0x9)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (21599.27 BogoMIPS)
node 0 deferred pages initialised in 32ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xba41a000-0xba41afff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xca905000-0xcb738fff] (14893056 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1659282729.068:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Kprobes globally optimized
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 10 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8FC4C0B82800 000630 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8FC4C0D06400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8FCBE10B2800 000115 (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8FCBE10B3400 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8FC4C0B83800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8FCBE10B3000 000197 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8FCBE10B3E00 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-7e]
pci 0000:00:00.0: [8086:591f] type 00 class 0x060000
pci 0000:00:02.0: [8086:5912] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xee000000-0xeeffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xef230000-0xef23ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xef250000-0xef250fff 64bit]
pci 0000:00:15.0: [8086:a2e0] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0xef24f000-0xef24ffff 64bit]
pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xef24e000-0xef24efff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:16.3: [8086:a2bd] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0xf0a0-0xf0a7]
pci 0000:00:16.3: reg 0x14: [mem 0xef24d000-0xef24dfff]
pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xef248000-0xef249fff]
pci 0000:00:17.0: reg 0x14: [mem 0xef24c000-0xef24c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xef24b000-0xef24b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: Intel SPT PCH root port ACS workaround enabled
pci 0000:00:1c.0: [8086:a297] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
pci 0000:00:1f.0: [8086:a2c6] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xef244000-0xef247fff]
pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xef240000-0xef243fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xef220000-0xef22ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xef24a000-0xef24a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.6: [8086:15e3] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xef200000-0xef21ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [144d:a80a] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xef100000-0xef103fff 64bit]
pci 0000:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:1b.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
pci 0000:00:1b.0: PCI bridge to [bus 01]
pci 0000:00:1b.0: bridge window [mem 0xef100000-0xef1fffff]
pci 0000:02:00.0: [8086:24fd] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xef000000-0xef001fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xef000000-0xef0fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
iommu: Default domain type: Translated
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xba41a000-0xbbffffff]
e820: reserve RAM buffer [mem 0xc7eb5000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc813e000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca651000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcbe00000-0xcbffffff]
e820: reserve RAM buffer [mem 0x82e000000-0x82fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a3f] has been reserved
system 00:00: [io 0x0a40-0x0a7f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x1800-0x18fe] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x0800-0x087f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x1854-0x1857] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0xeffe0000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:09: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:09: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:09: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:09: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:09: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:09: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [io 0xff00-0xfffe] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:1b.0: PCI bridge to [bus 01]
pci 0000:00:1b.0: bridge window [mem 0xef100000-0xef1fffff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xef000000-0xef0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xefffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 1 [mem 0xef100000-0xef1fffff]
pci_bus 0000:02: resource 1 [mem 0xef000000-0xef0fffff]
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x700 took 10919 usecs
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30664K
DMAR: ACPI device "device:77" under DMAR at fed91000 as 00:15.0
DMAR: No ATSR found
DMAR: dmar0: Using Queued invalidation
DMAR: dmar1: Using Queued invalidation
pci 0000:00:00.0: Adding to iommu group 0
pci 0000:00:02.0: Adding to iommu group 1
pci 0000:00:14.0: Adding to iommu group 2
pci 0000:00:14.2: Adding to iommu group 2
pci 0000:00:15.0: Adding to iommu group 3
pci 0000:00:16.0: Adding to iommu group 4
pci 0000:00:16.3: Adding to iommu group 4
pci 0000:00:17.0: Adding to iommu group 5
pci 0000:00:1b.0: Adding to iommu group 6
pci 0000:00:1c.0: Adding to iommu group 7
pci 0000:00:1f.0: Adding to iommu group 8
pci 0000:00:1f.2: Adding to iommu group 8
pci 0000:00:1f.3: Adding to iommu group 8
pci 0000:00:1f.4: Adding to iommu group 8
pci 0000:00:1f.6: Adding to iommu group 8
pci 0000:01:00.0: Adding to iommu group 9
pci 0000:02:00.0: Adding to iommu group 10
DMAR: Intel(R) Virtualization Technology for Directed I/O
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000b4882000-0x00000000b8882000] (64MB)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler mq-deadline registered
pcieport 0000:00:1b.0: AER: enabled with IRQ 122
pcieport 0000:00:1c.0: AER: enabled with IRQ 123
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xd0000000, using 1216k, total 1216k
efifb: mode is 640x480x32, linelength=2560, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x30
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.5.1 model 0x9E
intel_idle: Local APIC timer is reliable in all C-states
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial 0000:00:16.3: enabling device (0000 -> 0003)
0000:00:16.3: ttyS1 at I/O 0xf0a0 (irq = 20, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: registered as rtc0
rtc_cmos 00:06: setting system clock to 2022-07-31T15:52:10 UTC (1659282730)
rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
intel_pstate: Disabling energy efficiency optimization
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: sig=0x906e9, pf=0x2, revision=0xea
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (916896388, 542862)->(922025840, -4586590)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
Freeing unused kernel image (initmem) memory: 2424K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2040K
Freeing unused kernel image (rodata/data gap) memory: 624K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/vmlinuz-5.10.0-16-amd64
wmi_bus wmi_bus-PNP0C14:02: WQBC data block query control method not found
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
intel-lpss 0000:00:15.0: enabling device (0100 -> 0102)
idma64 idma64.0: Found Intel integrated DMA 64-bit
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.10.0-16-amd64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.10.0-16-amd64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
libata version 3.00 loaded.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
scsi host0: ahci
nvme nvme0: pci function 0000:01:00.0
scsi host1: ahci
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xef24b000 port 0xef24b100 irq 125
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
i2c i2c-1: 2/2 memory slots populated (from DMI)
i2c i2c-1: Successfully instantiated SPD at 0x50
nvme nvme0: Shutdown timeout set to 10 seconds
nvme nvme0: 4/0/0 default/read/poll queues
nvme0n1: p1 p2 p3
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 14:b3:1f:10:b8:ac
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
usb 1-9: new full-speed USB device number 2 using xhci_hcd
ata1: SATA link down (SStatus 4 SControl 300)
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
usb 1-9: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 5.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: USB
usb 2-1: Manufacturer: jmicron
usb 2-1: SerialNumber: 0000000000080
usbcore: registered new interface driver usb-storage
scsi host4: uas
usbcore: registered new interface driver uas
scsi 4:0:0:0: Direct-Access USB 3.0 0508 PQ: 0 ANSI: 6
sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 4:0:0:0: [sda] 4096-byte physical blocks
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 53 00 00 08
sd 4:0:0:0: [sda] Disabling FUA
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
sda: sda1 sda2 sda3
sd 4:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 2711.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x271785701be, max_idle_ns: 440795203568 ns
clocksource: Switched to clocksource tsc
PM: Image not found (code -22)
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-postfix.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Paths.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Finished Availability of block devices.
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: modprobe@configfs.service: Succeeded.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Mounted Kernel Configuration File System.
fuse: init (API version 7.32)
systemd[1]: modprobe@fuse.service: Succeeded.
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting Rule-based Manager for Device Events and Files...
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Condition check resulted in First Boot Complete being skipped.
systemd[1]: Started Rule-based Manager for Device Events and Files.
systemd[1]: Started Journal Service.
systemd-journald[260]: Received client request to flush runtime journal.
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:09 [mem 0xfdb00000-0xfdffffff]
caller pmc_core_probe+0x7e/0x410 [intel_pmc_core] mapping multiple BARs
intel_pmc_core INT33A1:00: initialized
ACPI: Power Button [PWRF]
ee1004 1-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
EXT4-fs (nvme0n1p2): mounting ext2 file system using the ext4 subsystem
iTCO_vendor_support: vendor-support=0
EXT4-fs (nvme0n1p2): mounted filesystem without journal. Opts: (null)
ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sd 4:0:0:0: Attached scsi generic sg0 type 0
pstore: Using crash dump compression: deflate
pstore: Registered efi as persistent store backend
input: Dell AIO WMI hotkeys as /devices/virtual/input/input6
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
cfg80211: Loading compiled-in X.509 certificates for regulatory database
input: PC Speaker as /devices/platform/pcspkr/input/input7
cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
platform regulatory.0: firmware: direct-loading firmware regulatory.db
platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
input: Dell WMI hotkeys as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input8
Intel(R) Wireless WiFi driver for Linux
iwlwifi 0000:02:00.0: enabling device (0100 -> 0102)
i915 0000:00:02.0: [drm] VT-d active for gfx access
checking generic (d0000000 130000) vs hw (ee000000 1000000)
checking generic (d0000000 130000) vs hw (d0000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
cryptd: max_cpu_qlen set to 1000
audit: type=1400 audit(1659282732.367:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=356 comm="apparmor_parser"
audit: type=1400 audit(1659282732.371:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=357 comm="apparmor_parser"
audit: type=1400 audit(1659282732.371:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=357 comm="apparmor_parser"
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
Adding 1003516k swap on /dev/mapper/g4ycyj2--vg-swap_1. Priority:-2 extents:1 across:1003516k SSFS
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
i915 0000:00:02.0: firmware: failed to load i915/kbl_dmc_ver1_04.bin (-2)
firmware_class: See for information about missing firmware
i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_04.bin failed with error -2
i915 0000:00:02.0: [drm] Failed to load DMC firmware i915/kbl_dmc_ver1_04.bin. Disabling runtime power management.
i915 0000:00:02.0: [drm] DMC firmware homepage:
iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8265-36.ucode (-2)
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-36.ucode failed with error -2
iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8265-35.ucode (-2)
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-35.ucode failed with error -2
iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8265-34.ucode (-2)
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-34.ucode failed with error -2
iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8265-33.ucode (-2)
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-33.ucode failed with error -2
iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8265-32.ucode (-2)
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-32.ucode failed with error -2
iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8265-31.ucode (-2)
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-31.ucode failed with error -2
iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8265-30.ucode (-2)
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-30.ucode failed with error -2
iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8265-29.ucode (-2)
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-29.ucode failed with error -2
iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8265-28.ucode (-2)
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-28.ucode failed with error -2
iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8265-27.ucode (-2)
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-27.ucode failed with error -2
iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8265-26.ucode (-2)
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2
iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8265-25.ucode (-2)
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2
iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8265-24.ucode (-2)
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2
iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8265-23.ucode (-2)
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2
iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8265-22.ucode (-2)
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-22.ucode failed with error -2
iwlwifi 0000:02:00.0: minimum version required: iwlwifi-8265-22
iwlwifi 0000:02:00.0: maximum version supported: iwlwifi-8265-36
iwlwifi 0000:02:00.0: check git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
Bluetooth: hci0: Device revision is 16
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
bluetooth hci0: firmware: failed to load intel/ibt-12-16.sfi (-2)
bluetooth hci0: Direct firmware load for intel/ibt-12-16.sfi failed with error -2
Bluetooth: hci0: Failed to load Intel firmware file (-2)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3234: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
audit: type=1400 audit(1659282732.791:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=633 comm="apparmor_parser"
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Front Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
tpm_tis: probe of MSFT0101:00 failed with error -1
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
Initializing XFRM netlink socket
docker0: port 1(vethf92e721) entered blocking state
docker0: port 1(vethf92e721) entered disabled state
device vethf92e721 entered promiscuous mode
docker0: port 1(vethf92e721) entered blocking state
docker0: port 1(vethf92e721) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
docker0: port 1(vethf92e721) entered disabled state
br-1de43273c9ff: port 1(veth69856f2) entered blocking state
br-1de43273c9ff: port 1(veth69856f2) entered disabled state
device veth69856f2 entered promiscuous mode
br-1de43273c9ff: port 1(veth69856f2) entered blocking state
br-1de43273c9ff: port 1(veth69856f2) entered forwarding state
br-1de43273c9ff: port 1(veth69856f2) entered disabled state
docker0: port 2(vethe35fbc1) entered blocking state
docker0: port 2(vethe35fbc1) entered disabled state
device vethe35fbc1 entered promiscuous mode
docker0: port 2(vethe35fbc1) entered blocking state
docker0: port 2(vethe35fbc1) entered forwarding state
docker0: port 3(veth521a9b7) entered blocking state
docker0: port 3(veth521a9b7) entered disabled state
device veth521a9b7 entered promiscuous mode
docker0: port 3(veth521a9b7) entered blocking state
docker0: port 3(veth521a9b7) entered forwarding state
docker0: port 4(vethf7d01d8) entered blocking state
docker0: port 4(vethf7d01d8) entered disabled state
device vethf7d01d8 entered promiscuous mode
docker0: port 4(vethf7d01d8) entered blocking state
docker0: port 4(vethf7d01d8) entered forwarding state
eth0: renamed from veth6519716
eth0: renamed from vethacb4f6a
IPv6: ADDRCONF(NETDEV_CHANGE): vethe35fbc1: link becomes ready
docker0: port 3(veth521a9b7) entered disabled state
docker0: port 4(vethf7d01d8) entered disabled state
eth0: renamed from vethe88cd25
IPv6: ADDRCONF(NETDEV_CHANGE): vethf92e721: link becomes ready
docker0: port 1(vethf92e721) entered blocking state
docker0: port 1(vethf92e721) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): veth69856f2: link becomes ready
br-1de43273c9ff: port 1(veth69856f2) entered blocking state
br-1de43273c9ff: port 1(veth69856f2) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br-1de43273c9ff: link becomes ready
eth0: renamed from vethc64d153
IPv6: ADDRCONF(NETDEV_CHANGE): veth521a9b7: link becomes ready
docker0: port 3(veth521a9b7) entered blocking state
docker0: port 3(veth521a9b7) entered forwarding state
eth0: renamed from vethcef7055
IPv6: ADDRCONF(NETDEV_CHANGE): vethf7d01d8: link becomes ready
docker0: port 4(vethf7d01d8) entered blocking state
docker0: port 4(vethf7d01d8) entered forwarding state
e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750