dmesg - Intel
microcode: microcode updated early to revision 0xea, date = 2021-03-08
Linux version 5.13.0-39-generic (buildd@lcy02-amd64-080) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #44~20.04.1-Ubuntu SMP Thu Mar 24 16:43:35 UTC 2022 (Ubuntu 5.13.0-39.44~20.04.1-generic 5.13.19)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000005cfff] usable
BIOS-e820: [mem 0x000000000005d000-0x000000000005dfff] reserved
BIOS-e820: [mem 0x000000000005e000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved
BIOS-e820: [mem 0x0000000040400000-0x000000008b90dfff] usable
BIOS-e820: [mem 0x000000008b90e000-0x000000008b90efff] ACPI NVS
BIOS-e820: [mem 0x000000008b90f000-0x000000008b931fff] usable
BIOS-e820: [mem 0x000000008b932000-0x000000008b932fff] reserved
BIOS-e820: [mem 0x000000008b933000-0x000000008ba96fff] usable
BIOS-e820: [mem 0x000000008ba97000-0x000000008d302fff] reserved
BIOS-e820: [mem 0x000000008d303000-0x000000008d37ffff] ACPI data
BIOS-e820: [mem 0x000000008d380000-0x000000008d858fff] ACPI NVS
BIOS-e820: [mem 0x000000008d859000-0x000000008dffefff] reserved
BIOS-e820: [mem 0x000000008dfff000-0x000000008dffffff] usable
BIOS-e820: [mem 0x000000008e000000-0x000000009f7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000045e7fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x85f78018-0x85f88057] usable ==> usable
e820: update [mem 0x85f78018-0x85f88057] usable ==> usable
e820: update [mem 0x85f6a018-0x85f77857] usable ==> usable
e820: update [mem 0x85f6a018-0x85f77857] usable ==> usable
e820: update [mem 0x85e1d018-0x85e2d457] usable ==> usable
e820: update [mem 0x85e1d018-0x85e2d457] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000005cfff] usable
reserve setup_data: [mem 0x000000000005d000-0x000000000005dfff] reserved
reserve setup_data: [mem 0x000000000005e000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000003fffffff] usable
reserve setup_data: [mem 0x0000000040000000-0x00000000403fffff] reserved
reserve setup_data: [mem 0x0000000040400000-0x0000000085e1d017] usable
reserve setup_data: [mem 0x0000000085e1d018-0x0000000085e2d457] usable
reserve setup_data: [mem 0x0000000085e2d458-0x0000000085f6a017] usable
reserve setup_data: [mem 0x0000000085f6a018-0x0000000085f77857] usable
reserve setup_data: [mem 0x0000000085f77858-0x0000000085f78017] usable
reserve setup_data: [mem 0x0000000085f78018-0x0000000085f88057] usable
reserve setup_data: [mem 0x0000000085f88058-0x000000008b90dfff] usable
reserve setup_data: [mem 0x000000008b90e000-0x000000008b90efff] ACPI NVS
reserve setup_data: [mem 0x000000008b90f000-0x000000008b931fff] usable
reserve setup_data: [mem 0x000000008b932000-0x000000008b932fff] reserved
reserve setup_data: [mem 0x000000008b933000-0x000000008ba96fff] usable
reserve setup_data: [mem 0x000000008ba97000-0x000000008d302fff] reserved
reserve setup_data: [mem 0x000000008d303000-0x000000008d37ffff] ACPI data
reserve setup_data: [mem 0x000000008d380000-0x000000008d858fff] ACPI NVS
reserve setup_data: [mem 0x000000008d859000-0x000000008dffefff] reserved
reserve setup_data: [mem 0x000000008dfff000-0x000000008dffffff] usable
reserve setup_data: [mem 0x000000008e000000-0x000000009f7fffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000045e7fffff] usable
efi: EFI v2.70 by American Megatrends
efi: ACPI=0x8d7f5000 ACPI 2.0=0x8d7f5014 SMBIOS=0x8dd87000 SMBIOS 3.0=0x8dd86000 MEMATTR=0x866e2818 ESRT=0x893e1e18 MOKvar=0x8603e000 RNG=0x8ddb2818
efi: seeding entropy pool
random: fast init done
secureboot: Secure boot disabled
SMBIOS 3.2.0 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H470M-ITX/ac, BIOS P1.20 05/18/2020
tsc: Detected 2900.000 MHz processor
tsc: Detected 2899.886 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x45e800 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x8e000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fce90-0x000fce9f]
esrt: Reserving ESRT space from 0x00000000893e1e18 to 0x00000000893e1e78.
e820: update [mem 0x893e1000-0x893e1fff] usable ==> reserved
e820: update [mem 0x8603e000-0x8603efff] usable ==> reserved
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x1aeb2000-0x1eaeafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008D7F5014 000024 (v02 ALASKA)
ACPI: XSDT 0x000000008D7F4728 0000BC (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: FACP 0x000000008D379000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000008D337000 041FF1 (v02 ALASKA A M I 01072009 INTL 20160527)
ACPI: FACS 0x000000008D858000 000040
ACPI: MCFG 0x000000008D37D000 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000008D37A000 0020AD (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
ACPI: FIDT 0x000000008D336000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: AAFT 0x000000008D37F000 000310 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: SSDT 0x000000008D332000 0031DA (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
ACPI: HPET 0x000000008D37E000 000038 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x000000008D32F000 002FB0 (v02 INTEL xh_cmsd4 00000000 INTL 20160527)
ACPI: NHLT 0x000000008D32D000 001821 (v00 ALASKA A M I 01072009 AMI 01000013)
ACPI: LPIT 0x000000008D32C000 000094 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x000000008D328000 0025B2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527)
ACPI: DBGP 0x000000008D327000 000034 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: DBG2 0x000000008D326000 000054 (v00 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x000000008D324000 001B67 (v02 ALASKA UsbCTabl 00001000 INTL 20160527)
ACPI: DMAR 0x000000008D323000 0000A8 (v01 INTEL EDK2 00000002 01000013)
ACPI: BGRT 0x000000008D322000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: WSMT 0x000000008D32B000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: APIC 0x000000008D321000 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000008D320000 000044 (v01 ALASKA CML 01072009 AMI 01000013)
ACPI: Reserving FACP table memory at [mem 0x8d379000-0x8d379113]
ACPI: Reserving DSDT table memory at [mem 0x8d337000-0x8d378ff0]
ACPI: Reserving FACS table memory at [mem 0x8d858000-0x8d85803f]
ACPI: Reserving MCFG table memory at [mem 0x8d37d000-0x8d37d03b]
ACPI: Reserving SSDT table memory at [mem 0x8d37a000-0x8d37c0ac]
ACPI: Reserving FIDT table memory at [mem 0x8d336000-0x8d33609b]
ACPI: Reserving AAFT table memory at [mem 0x8d37f000-0x8d37f30f]
ACPI: Reserving SSDT table memory at [mem 0x8d332000-0x8d3351d9]
ACPI: Reserving HPET table memory at [mem 0x8d37e000-0x8d37e037]
ACPI: Reserving SSDT table memory at [mem 0x8d32f000-0x8d331faf]
ACPI: Reserving NHLT table memory at [mem 0x8d32d000-0x8d32e820]
ACPI: Reserving LPIT table memory at [mem 0x8d32c000-0x8d32c093]
ACPI: Reserving SSDT table memory at [mem 0x8d328000-0x8d32a5b1]
ACPI: Reserving DBGP table memory at [mem 0x8d327000-0x8d327033]
ACPI: Reserving DBG2 table memory at [mem 0x8d326000-0x8d326053]
ACPI: Reserving SSDT table memory at [mem 0x8d324000-0x8d325b66]
ACPI: Reserving DMAR table memory at [mem 0x8d323000-0x8d3230a7]
ACPI: Reserving BGRT table memory at [mem 0x8d322000-0x8d322037]
ACPI: Reserving WSMT table memory at [mem 0x8d32b000-0x8d32b027]
ACPI: Reserving APIC table memory at [mem 0x8d321000-0x8d3210f3]
ACPI: Reserving FPDT table memory at [mem 0x8d320000-0x8d320043]
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000045e7fffff]
NODE_DATA(0) allocated [mem 0x45e7d6000-0x45e7fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000045e7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000005cfff]
node 0: [mem 0x000000000005e000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000003fffffff]
node 0: [mem 0x0000000040400000-0x000000008b90dfff]
node 0: [mem 0x000000008b90f000-0x000000008b931fff]
node 0: [mem 0x000000008b933000-0x000000008ba96fff]
node 0: [mem 0x000000008dfff000-0x000000008dffffff]
node 0: [mem 0x0000000100000000-0x000000045e7fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000045e7fffff]
On node 0 totalpages: 4103732
DMA zone: 64 pages used for memmap
DMA zone: 158 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8859 pages used for memmap
DMA32 zone: 566934 pages, LIFO batch:63
Normal zone: 55200 pages used for memmap
Normal zone: 3532800 pages, LIFO batch:63
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 96 pages in unavailable ranges
On node 0, zone DMA32: 1024 pages in unavailable ranges
On node 0, zone DMA32: 1 pages in unavailable ranges
On node 0, zone DMA32: 1 pages in unavailable ranges
On node 0, zone DMA32: 9576 pages in unavailable ranges
On node 0, zone Normal: 8192 pages in unavailable ranges
On node 0, zone Normal: 6144 pages in unavailable ranges
Reserving Intel graphics memory at [mem 0x8f800000-0x9f7fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x86612000-0x86652fff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0005d000-0x0005dfff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x40000000-0x403fffff]
PM: hibernation: Registered nosave memory: [mem 0x85e1d000-0x85e1dfff]
PM: hibernation: Registered nosave memory: [mem 0x85e2d000-0x85e2dfff]
PM: hibernation: Registered nosave memory: [mem 0x85f6a000-0x85f6afff]
PM: hibernation: Registered nosave memory: [mem 0x85f77000-0x85f77fff]
PM: hibernation: Registered nosave memory: [mem 0x85f78000-0x85f78fff]
PM: hibernation: Registered nosave memory: [mem 0x85f88000-0x85f88fff]
PM: hibernation: Registered nosave memory: [mem 0x8603e000-0x8603efff]
PM: hibernation: Registered nosave memory: [mem 0x86612000-0x86652fff]
PM: hibernation: Registered nosave memory: [mem 0x893e1000-0x893e1fff]
PM: hibernation: Registered nosave memory: [mem 0x8b90e000-0x8b90efff]
PM: hibernation: Registered nosave memory: [mem 0x8b932000-0x8b932fff]
PM: hibernation: Registered nosave memory: [mem 0x8ba97000-0x8d302fff]
PM: hibernation: Registered nosave memory: [mem 0x8d303000-0x8d37ffff]
PM: hibernation: Registered nosave memory: [mem 0x8d380000-0x8d858fff]
PM: hibernation: Registered nosave memory: [mem 0x8d859000-0x8dffefff]
PM: hibernation: Registered nosave memory: [mem 0x8e000000-0x9f7fffff]
PM: hibernation: Registered nosave memory: [mem 0x9f800000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x9f800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
percpu: Embedded 65 pages/cpu s229376 r8192 d28672 u524288
pcpu-alloc: s229376 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
pcpu-alloc: [0] 08 09 10 11
Built 1 zonelists, mobility grouping on. Total pages: 4039451
Policy zone: Normal
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 15870512K/16414928K available (16393K kernel code, 3512K rwdata, 10496K rodata, 2896K init, 5732K bss, 544156K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x2d/0x440 with crng_init=1
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
ftrace: allocating 49259 entries in 193 pages
ftrace: allocated 193 pages with 3 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20210331
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000008db1a000 end: 0x0000008dd63fff
DMAR: RMRR base: 0x0000008f000000 end: 0x0000009f7fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=11599544)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
x86/cpu: SGX disabled by BIOS.
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Enhanced IBRS
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1447
smpboot: CPU0: Intel(R) Core(TM) i5-10400 CPU @ 2.90GHz (family: 0x6, model: 0xa5, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 12 processors activated (69597.26 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x8b90e000-0x8b90efff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x8d380000-0x8d858fff] (5083136 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 13:51:59, date: 2022-04-21
NET: Registered protocol family 16
DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1650549119.048:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Kprobes globally optimized
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E8D01322400 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E8D017E4000 0005E4 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E8D0130C800 0000FC (v02 PmRef Cpu0Psd 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E8D017E0000 000778 (v02 PmRef ApIst 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E8D017EB000 000D22 (v02 PmRef ApPsd 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E8D01326000 0003CA (v02 PmRef ApCst 00003000 INTL 20160527)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 9 GPEs in block 00 to 7F
ACPI: PM: Power Resource [WRST] (on)
ACPI: PM: Power Resource [DRST] (on)
ACPI: PM: Power Resource [USBC] (on)
ACPI: PM: Power Resource [V0PR] (on)
ACPI: PM: Power Resource [V1PR] (on)
ACPI: PM: Power Resource [V2PR] (on)
ACPI: PM: Power Resource [WRST] (on)
ACPI: PM: Power Resource [PIN] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x9f800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci 0000:00:00.0: [8086:9b53] type 00 class 0x060000
pci 0000:00:02.0: [8086:9bc8] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:12.0: [8086:06f9] type 00 class 0x118000
pci 0000:00:12.0: reg 0x10: [mem 0xb153d000-0xb153dfff 64bit]
pci 0000:00:14.0: [8086:06ed] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb1520000-0xb152ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:06ef] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0xb1536000-0xb1537fff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0xb153c000-0xb153cfff 64bit]
pci 0000:00:16.0: [8086:06e0] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb153b000-0xb153bfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:06d2] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xb1534000-0xb1535fff]
pci 0000:00:17.0: reg 0x14: [mem 0xb153a000-0xb153a0ff]
pci 0000:00:17.0: reg 0x18: [io 0x4090-0x4097]
pci 0000:00:17.0: reg 0x1c: [io 0x4080-0x4083]
pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:17.0: reg 0x24: [mem 0xb1539000-0xb15397ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:06ac] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PTM enabled (root), 4ns granularity
pci 0000:00:1c.0: [8086:06ba] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
pci 0000:00:1c.3: [8086:06bb] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PTM enabled (root), 4ns granularity
pci 0000:00:1d.0: [8086:06b0] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
pci 0000:00:1f.0: [8086:0684] type 00 class 0x060100
pci 0000:00:1f.3: [8086:06c8] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xb1530000-0xb1533fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xb1000000-0xb10fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:06a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xb1538000-0xb15380ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.5: [8086:06a4] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:00:1f.6: [8086:0d4d] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xb1500000-0xb151ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [144d:a809] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xb1400000-0xb1403fff 64bit]
pci 0000:00:1b.0: PCI bridge to [bus 01]
pci 0000:00:1b.0: bridge window [mem 0xb1400000-0xb14fffff]
pci 0000:02:00.0: [8086:24fb] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xb1300000-0xb1301fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xb1300000-0xb13fffff]
pci 0000:03:00.0: [10ec:8125] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:03:00.0: reg 0x18: [mem 0xb1200000-0xb120ffff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xb1210000-0xb1213fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xb1200000-0xb12fffff]
pci 0000:04:00.0: [1987:5012] type 00 class 0x010802
pci 0000:04:00.0: reg 0x10: [mem 0xb1100000-0xb1103fff 64bit]
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.0: bridge window [mem 0xb1100000-0xb11fffff]
ACPI: PCI: Interrupt link LNKA configured for IRQ 0
ACPI: PCI: Interrupt link LNKB configured for IRQ 1
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
acpi LNXPOWER:07: Turning OFF
acpi LNXPOWER:06: Turning OFF
acpi LNXPOWER:01: Turning OFF
acpi LNXPOWER:00: Turning OFF
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0005d000-0x0005ffff]
e820: reserve RAM buffer [mem 0x85e1d018-0x87ffffff]
e820: reserve RAM buffer [mem 0x85f6a018-0x87ffffff]
e820: reserve RAM buffer [mem 0x85f78018-0x87ffffff]
e820: reserve RAM buffer [mem 0x8603e000-0x87ffffff]
e820: reserve RAM buffer [mem 0x86612000-0x87ffffff]
e820: reserve RAM buffer [mem 0x893e1000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8b90e000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8b932000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8ba97000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8e000000-0x8fffffff]
e820: reserve RAM buffer [mem 0x45e800000-0x45fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x40000000-0x403fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0280-0x028f] has been reserved
system 00:01: [io 0x02a0-0x02af] has been reserved
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: [io 0x02b0-0x02bf] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x1800-0x18fe] could not be reserved
system 00:04: [mem 0xfd000000-0xfd69ffff] has been reserved
system 00:04: [mem 0xfd6c0000-0xfd6cffff] has been reserved
system 00:04: [mem 0xfd6f0000-0xfdffffff] has been reserved
system 00:04: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:04: [mem 0xfe200000-0xfe7fffff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x2000-0x20fe] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfd6e0000-0xfd6effff] has been reserved
system 00:06: [mem 0xfd6d0000-0xfd6dffff] has been reserved
system 00:06: [mem 0xfd6b0000-0xfd6bffff] has been reserved
system 00:06: [mem 0xfd6a0000-0xfd6affff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfe038000-0xfe038fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:1b.0: PCI bridge to [bus 01]
pci 0000:00:1b.0: bridge window [mem 0xb1400000-0xb14fffff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xb1300000-0xb13fffff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xb1200000-0xb12fffff]
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.0: bridge window [mem 0xb1100000-0xb11fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x9f800000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:01: resource 1 [mem 0xb1400000-0xb14fffff]
pci_bus 0000:02: resource 1 [mem 0xb1300000-0xb13fffff]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xb1200000-0xb12fffff]
pci_bus 0000:04: resource 1 [mem 0xb1100000-0xb11fffff]
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x640 took 11843 usecs
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x0000000081d34000-0x0000000085d34000] (64MB)
Trying to unpack rootfs image as initramfs...
platform rtc_cmos: registered platform RTC device (no PNP device found)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.34)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xa0000000, using 8100k, total 8100k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: \_SB_.PR00: Found 2 idle states
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: button: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: button: Power Button [PWRF]
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
Freeing initrd memory: 61668K
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: registered as rtc0
rtc_cmos rtc_cmos: setting system clock to 2022-04-21T13:52:00 UTC (1650549120)
rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: CPU model not supported
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0xa0653, pf=0x2, revision=0xea
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (562147834, 544509)->(569672759, -6980416)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 047b11e36e8d8f22bbe5cf684b1809703caeafe3'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
blacklist: Loading compiled-in revocation X.509 certificates
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 047b11e36e8d8f22bbe5cf684b1809703caeafe3'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 2:284:888
RAS: Correctable Errors collector initialized.
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 2896K
Write protecting the kernel read-only data: 30720k
Freeing unused kernel image (text/rodata gap) memory: 2036K
Freeing unused kernel image (rodata/data gap) memory: 1792K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.13.0-39-generic
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ahci 0000:00:17.0: version 3.0
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
nvme 0000:01:00.0: platform quirk: setting simple suspend
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
nvme nvme0: pci function 0000:01:00.0
nvme 0000:04:00.0: platform quirk: setting simple suspend
nvme nvme1: pci function 0000:04:00.0
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.13.0-39-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
nvme nvme1: missing or invalid SUBNQN field.
nvme nvme1: Shutdown timeout set to 10 seconds
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.13.0-39-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
i2c i2c-0: 2/2 memory slots populated (from DMI)
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
i2c i2c-0: Successfully instantiated SPD at 0x50
usb: port power management may be unreliable
nvme nvme1: 8/0/0 default/read/poll queues
nvme1n1: p1 p2 p3 p4 p5
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x3c impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds apst
nvme nvme0: Shutdown timeout set to 8 seconds
libphy: r8169: probed
r8169 0000:03:00.0 eth0: RTL8125B, a8:a1:59:2b:c0:a3, XID 641, IRQ 139
r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
r8169 0000:03:00.0 enp3s0: renamed from eth0
nvme nvme0: allocated 64 MiB host memory buffer.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xb1539000 port 0xb1539200 irq 127
ata4: SATA max UDMA/133 abar m2048@0xb1539000 port 0xb1539280 irq 127
ata5: SATA max UDMA/133 abar m2048@0xb1539000 port 0xb1539300 irq 127
ata6: SATA max UDMA/133 abar m2048@0xb1539000 port 0xb1539380 irq 127
nvme nvme0: 12/0/0 default/read/poll queues
nvme0n1: p1
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) a8:a1:59:2b:c0:a5
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 eno1: renamed from eth0
usb 1-1: new high-speed USB device number 2 using xhci_hcd
ata3: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata6.00: ATA-9: HS-SSD-C100 240G, H201230a, max UDMA/133
ata6.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA HS-SSD-C100 240G 230a PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 5:0:0:0: [sda] Attached SCSI disk
fbcon: Taking over console
Console: switching to colour frame buffer device 240x67
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice=90.24
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB3.0 Hub
usb 2-2: Manufacturer: VIA Labs, Inc.
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 2903.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc050a48e, max_idle_ns: 440795325698 ns
clocksource: Switched to clocksource tsc
usb 1-1: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 1-1: SerialNumber: 71E86B60
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 1-2: new full-speed USB device number 3 using xhci_hcd
systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro. Quota mode: none.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
usb 1-2: New USB device found, idVendor=046d, idProduct=c092, bcdDevice=52.00
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: G102 LIGHTSYNC Gaming Mouse
usb 1-2: Manufacturer: Logitech
usb 1-2: SerialNumber: 2085306F4843
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Set the console keyboard layout.
IPMI message handler: version 39.2
ipmi device interface
systemd[1]: Started Journal Service.
systemd-journald[354]: Received client request to flush runtime journal.
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
loop0: detected capacity change from 0 to 8
loop1: detected capacity change from 0 to 113680
loop2: detected capacity change from 0 to 448512
loop3: detected capacity change from 0 to 126760
loop4: detected capacity change from 0 to 448512
loop5: detected capacity change from 0 to 509456
usb 1-5: new low-speed USB device number 4 using xhci_hcd
loop6: detected capacity change from 0 to 113696
loop7: detected capacity change from 0 to 133320
loop8: detected capacity change from 0 to 89352
loop9: detected capacity change from 0 to 169776
usb 1-5: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.70
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB Keyboard
usb 1-5: Manufacturer:
loop10: detected capacity change from 0 to 126760
loop11: detected capacity change from 0 to 337424
usb 1-6: new high-speed USB device number 5 using xhci_hcd
loop12: detected capacity change from 0 to 104360
pstore: Using crash dump compression: deflate
pstore: Registered efi as persistent store backend
ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002)
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
cryptd: max_cpu_qlen set to 1000
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
loop13: detected capacity change from 0 to 133552
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
usb 1-6: New USB device found, idVendor=2109, idProduct=2817, bcdDevice=90.24
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-6: Product: USB2.0 Hub
usb 1-6: Manufacturer: VIA Labs, Inc.
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
Intel(R) Wireless WiFi driver for Linux
iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:02:00.0: loaded firmware version 29.1654887522.0 3168-29.ucode op_mode iwlmvm
loop14: detected capacity change from 0 to 91416
checking generic (a0000000 7e9000) vs hw (b0000000 1000000)
checking generic (a0000000 7e9000) vs hw (a0000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
thermal thermal_zone2: failed to read out thermal zone (-61)
intel_tcc_cooling: Programmable TCC Offset detected
iwlwifi 0000:02:00.0: base HW address: 04:33:c2:23:da:1b
loop15: detected capacity change from 0 to 111080
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
usb 1-13: new full-speed USB device number 6 using xhci_hcd
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
intel_rapl_common: RAPL package-0 domain package locked by BIOS
intel_rapl_common: RAPL package-0 domain dram locked by BIOS
snd_hda_intel 0000:00:1f.3: enabling device (0004 -> 0006)
usb 1-13: New USB device found, idVendor=26ce, idProduct=01a2, bcdDevice= 0.00
usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-13: Product: LED Controller
usb 1-13: Manufacturer: ASRock
usb 1-13: SerialNumber: A02019100900
i915 0000:00:02.0: [drm] failed to retrieve link info, disabling eDP
i915 0000:00:02.0: [drm] [ENCODER:104:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
[drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
usb 1-14: new full-speed USB device number 7 using xhci_hcd
snd_hda_codec_realtek hdaudioC0D0: ALCS1200A: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALCS1200A: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
usb 1-14: New USB device found, idVendor=8087, idProduct=0aa7, bcdDevice= 0.01
usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech G102 LIGHTSYNC Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C092.0001/input/input14
hid-generic 0003:046D:C092.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G102 LIGHTSYNC Gaming Mouse] on usb-0000:00:14.0-2/input0
input: Logitech G102 LIGHTSYNC Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C092.0002/input/input15
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370810225019140f3c
Bluetooth: hci0: Intel device is already patched. patch num: 3c
hid-generic 0003:046D:C092.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G102 LIGHTSYNC Gaming Mouse] on usb-0000:00:14.0-2/input1
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:1C4F:0002.0003/input/input18
usb 1-1: set resolution quirk: cval->res = 384
usbcore: registered new interface driver snd-usb-audio
usb 1-1: Found UVC 1.00 device (046d:0825)
input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input19
hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.11 Keyboard [ USB Keyboard] on usb-0000:00:14.0-5/input0
usbcore: registered new interface driver uvcvideo
input: USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:1C4F:0002.0004/input/input20
input: USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:1C4F:0002.0004/input/input21
hid-generic 0003:1C4F:0002.0004: input,hidraw3: USB HID v1.11 Device [ USB Keyboard] on usb-0000:00:14.0-5/input1
input: ASRock LED Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.0/0003:26CE:01A2.0005/input/input22
hid-generic 0003:26CE:01A2.0005: input,hidraw4: USB HID v1.10 Device [ASRock LED Controller] on usb-0000:00:14.0-13/input0
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
audit: type=1400 audit(1650549126.914:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=817 comm="apparmor_parser"
audit: type=1400 audit(1650549126.914:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=826 comm="apparmor_parser"
audit: type=1400 audit(1650549126.914:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=818 comm="apparmor_parser"
audit: type=1400 audit(1650549126.914:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=820 comm="apparmor_parser"
audit: type=1400 audit(1650549126.914:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=820 comm="apparmor_parser"
audit: type=1400 audit(1650549126.914:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=822 comm="apparmor_parser"
audit: type=1400 audit(1650549126.914:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=827 comm="apparmor_parser"
audit: type=1400 audit(1650549126.914:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=827 comm="apparmor_parser"
audit: type=1400 audit(1650549126.914:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=827 comm="apparmor_parser"
audit: type=1400 audit(1650549126.918:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=816 comm="apparmor_parser"
process '/usr/bin/anydesk' started with executable stack
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
NET: Registered protocol family 38
RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
r8169 0000:03:00.0 enp3s0: Link is Down
aufs 5.x-rcN-20210809
loop16: detected capacity change from 0 to 8
usb 1-1: reset high-speed USB device number 2 using xhci_hcd
rfkill: input handler disabled
r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
kauditd_printk_skb: 31 callbacks suppressed
audit: type=1400 audit(1650549134.478:43): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1673 comm="apparmor_parser"
loop16: detected capacity change from 0 to 209715200
loop17: detected capacity change from 0 to 4194304
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
bpfilter: Loaded bpfilter_umh pid 1754
Started bpfilter
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Initializing XFRM netlink socket
rfkill: input handler enabled
rfkill: input handler disabled
usb 1-1: reset high-speed USB device number 2 using xhci_hcd
usb 1-1: reset high-speed USB device number 2 using xhci_hcd
loop18: detected capacity change from 0 to 91496
audit: type=1400 audit(1650549448.876:44): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/15534/usr/lib/snapd/snap-confine" pid=3625 comm="apparmor_parser"
audit: type=1400 audit(1650549448.876:45): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/15534/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3625 comm="apparmor_parser"
audit: type=1400 audit(1650549449.244:46): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.discord" pid=3628 comm="apparmor_parser"
audit: type=1400 audit(1650549449.272:47): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.snap-store" pid=3629 comm="apparmor_parser"
audit: type=1400 audit(1650549449.280:48): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.discord.hook.configure" pid=3632 comm="apparmor_parser"
audit: type=1400 audit(1650549449.280:49): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.snap-store.hook.configure" pid=3633 comm="apparmor_parser"
audit: type=1400 audit(1650549449.288:50): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.snap-store.snap-store" pid=3634 comm="apparmor_parser"
audit: type=1400 audit(1650549449.288:51): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.snap-store.ubuntu-software-local-file" pid=3636 comm="apparmor_parser"
audit: type=1400 audit(1650549449.288:52): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.discord.discord" pid=3631 comm="apparmor_parser"
audit: type=1400 audit(1650549449.288:53): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=3635 comm="apparmor_parser"
loop19: detected capacity change from 0 to 8
usb 1-1: reset high-speed USB device number 2 using xhci_hcd
usb 1-1: reset high-speed USB device number 2 using xhci_hcd
kauditd_printk_skb: 10 callbacks suppressed
audit: type=1400 audit(1650550462.632:64): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/zoneinfo-icu/44/le/zoneinfo64.res" pid=7451 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1650550462.632:65): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/zoneinfo-icu/44/le/timezoneTypes.res" pid=7451 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0