dmesg - USB3.0_Port1_A
Booting Linux on physical CPU 0x0
Linux version 4.9.201-tegra (root@jimmyfang-virtual-machine) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Jul 14 14:10:23 CST 2021
Boot CPU: AArch64 Processor [411fd071]
OF: fdt:memory scan node memory@80000000, reg size 32,
OF: fdt: - 80000000 , 7ee00000
OF: fdt: - 100000000 , 7f200000
Found tegra_fbmem: 00800000@92cb4000
earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
bootconsole [uart8250] enabled
OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout
OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
cma: Reserved 64 MiB at 0x00000000fac00000
On node 0 totalpages: 1039872
DMA zone: 8192 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 519168 pages, LIFO batch:31
Normal zone: 8136 pages used for memmap
Normal zone: 520704 pages, LIFO batch:31
psci: probing for conduit method from DT.
psci: PSCIv1.0 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.1
percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304
pcpu-alloc: s57560 r8192 d32552 u98304 alloc=24*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
CPU features: enabling workaround for ARM erratum 832075
Speculative Store Bypass Disable mitigation not required
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544
Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 gpt tegra_fbmem=0x800000@0x92cb4000 is_hdmi_initialised=1 earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/nvme0n1p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1
log_buf_len individual max cpu contribution: 32768 bytes
log_buf_len total cpu_extra contributions: 98304 bytes
log_buf_len min size: 32768 bytes
log_buf_len: 131072 bytes
early log buf free: 29180(89%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 3560076K/4159488K available (15358K kernel code, 2952K rwdata, 6800K rodata, 8640K init, 635K bss, 124276K reserved, 475136K cma-reserved)
Virtual kernel memory layout:
modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
.text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB)
.rodata : 0xffffff8008f80000 - 0xffffff8009630000 ( 6848 KB)
.init : 0xffffff8009630000 - 0xffffff8009ea0000 ( 8640 KB)
.data : 0xffffff8009ea0000 - 0xffffff800a182008 ( 2953 KB)
.bss : 0xffffff800a182008 - 0xffffff800a220e5c ( 636 KB)
fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual)
memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:64 nr_irqs:64 0
/interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller
t210 clock and reset probe
tegra-pmc: get_secure_pmc_setting: done secure_pmc=1
clk_cbus_recalc_rate: no gbus parent
clk_cbus_recalc_rate: no gbus parent
clk_cbus_recalc_rate: no gbus parent
clk_cbus_recalc_rate: no gbus parent
clk_cbus_recalc_rate: no gbus parent
arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
Console: colour dummy device 80x25
console [tty0] enabled
bootconsole [uart8250] disabled
kmemleak: Kernel memory leak detector disabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
ftrace: allocating 47485 entries in 186 pages
sched-energy: CPU device node has no sched-energy-costs
ASID allocator initialised with 65536 entries
tegra-id: chipid=22117.
tegra-id: opt_subrevision=0.
Tegra Speedo/IDDQ fuse revision 4
Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2
Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0
Tegra: CPU Speedo Value 2042, SoC Speedo Value 1940, GPU Speedo Value 2059
Tegra: CPU IDDQ Value 1788, SoC IDDQ Value 1920, GPU IDDQ Value 2450
Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0
DTS File Name: R32_5_1_Nano_AIE-CO13_1.dts
DTB Build time: Jul 14 2021 14:10:40
CPU1: Booted secondary processor [411fd071]
CPU2: Booted secondary processor [411fd071]
CPU3: Booted secondary processor [411fd071]
Brought up 4 CPUs
SMP: Total of 4 processors activated.
CPU features: detected feature: 32-bit EL0 Support
CPU: All CPU(s) started at EL2
alternatives: patching kernel code
devtmpfs: initialized
Initilizing CustomIPI irq domain
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
OS set in device tree is not L4T.
regulator-dummy: no parameters
Initializing plugin-manager
Plugin module not found
node /plugin-manager/fragement@0 match with board >=3448-0002-100
node /plugin-manager/fragment@1 match with board >=3448-0002-101
node /plugin-manager/fragment@3 match with board >=3448-0002-100
node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt
node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt
node /plugin-manager/fragement@10 match with board >=3448-0002-300
node /plugin-manager/fragement@13 match with board >=3448-0002-300
NET: Registered protocol family 16
pstore: using zlib compression
console [pstore-1] enabled
pstore: Registered ramoops as persistent store backend
ramoops: attached 0x200000@0xb0000000, ecc: 0/0
cpuidle: using governor menu
tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009ea4000)
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
tegra_powergate_init: DONE
DTS File Name: R32_5_1_Nano_AIE-CO13_1.dts
DTB Build time: Jul 14 2021 14:10:40
Tegra reboot handler registered.
iommu: Adding device tegra-carveouts to group 0
platform tegra-carveouts: domain=ffffffc0f9b81018 allocates as[0]=ffffffc0f94500a8
iommu: Adding device smmu_test to group 1
platform smmu_test: domain=ffffffc0f9b81258 allocates as[0]=ffffffc0f9450110
mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000
mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000
mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000
nv-tegra-mc 70019000.mc: No mssnvlink node
mc-err: mcerr ops are set to t21x
iommu: Adding device 70090000.xusb to group 2
iommu: Adding device 70006000.serial to group 3
iommu: Adding device 70006040.serial to group 4
iommu: Adding device 70006200.serial to group 5
iommu: Adding device sound to group 6
platform sound: domain=ffffffc0f94bfe58 allocates as[0]=ffffffc0f94501e0
iommu: Adding device 7000d600.spi to group 7
iommu: Adding device 50000000.host1x to group 8
iommu: Adding device 54080000.vi to group 9
iommu: Adding device 54600000.isp to group 10
iommu: Adding device 54680000.isp to group 11
iommu: Adding device tegradc.0 to group 12
platform tegradc.0: domain=ffffffc0f94d4a98 allocates as[0]=ffffffc0f9450248
platform tegradc.0: IOVA linear map 0x0000000092cb4000(800000)
platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000)
iommu: Adding device tegradc.1 to group 13
platform tegradc.1: domain=ffffffc0f94d4cd8 allocates as[0]=ffffffc0f94502b0
platform tegradc.1: IOVA linear map 0x0000000092cb4000(800000)
platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000)
iommu: Adding device 54340000.vic to group 14
iommu: Adding device 544c0000.nvenc to group 15
iommu: Adding device 54500000.tsec to group 16
iommu: Adding device 54100000.tsecb to group 17
iommu: Adding device 54480000.nvdec to group 18
iommu: Adding device 54380000.nvjpg to group 19
iommu: Adding device 546c0000.i2c to group 20
iommu: Adding device 57000000.gpu to group 21
platform 57000000.gpu: domain=ffffffc0f952fcd8 allocates as[0]=ffffffc0f9450318
platform 57000000.gpu: domain=ffffffc0f952fcd8 allocates as[1]=ffffffc0f9450380
platform 57000000.gpu: domain=ffffffc0f952fcd8 allocates as[2]=ffffffc0f94503e8
platform 57000000.gpu: domain=ffffffc0f952fcd8 allocates as[3]=ffffffc0f9450450
tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
tegra-pmc 7000e400.pmc: scratch reg offset dts data not present
tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET
tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM
tegra-pmc: ### PMC reset status reg: 0x3
padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
tegra-pmc: Clear bootloader IO dpd settings
tegra-pmc 7000e400.pmc: IO padctrl driver initialized
tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands
iommu: Adding device 70012000.se to group 22
iommu: Adding device 7000c000.i2c to group 23
iommu: Adding device 7000c400.i2c to group 24
iommu: Adding device 7000c500.i2c to group 25
iommu: Adding device 7000c700.i2c to group 26
iommu: Adding device 7000d000.i2c to group 27
iommu: Adding device 7000d100.i2c to group 28
iommu: Adding device sdhci-tegra.3 to group 29
platform sdhci-tegra.3: domain=ffffffc0f953be58 allocates as[0]=ffffffc0f94504b8
iommu: Adding device sdhci-tegra.2 to group 30
platform sdhci-tegra.2: domain=ffffffc0f957b0d8 allocates as[0]=ffffffc0f9450520
iommu: Adding device 700d0000.xudc to group 31
vdd-ac-bat: 5000 mV
vdd-5v0-sys: 5000 mV
vdd-5v0-hdmi: supplied by vdd-5v0-sys
vdd-5v0-hdmi: 5000 mV
vdd-1v8-sys: 1800 mV
vdd-fan: supplied by vdd-5v0-sys
vdd-fan: 5000 mV
vdd-usb-vbus: supplied by vdd-5v0-sys
vdd-usb-vbus: 5000 mV
vdd-usb-vbus2: 5000 mV
HugeTLB registered 2 MB page size, pre-allocated 0 pages
gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip
GPIO line 151 (camera-control-output-low) hogged as output/low
GPIO line 152 (camera-control-output-low) hogged as output/low
GPIO line 6 (system-suspend-gpio) hogged as output/high
gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio)
eventlib_kernel: keventlib is initialized, test id: 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8
vdd-core: 600 1162 mV at 1125 mV
random: fast init done
vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV
vdd-ddr-1v1: 1150 mV
vdd-pre-reg-1v35: 1350 mV
vdd-1v8: 1800 mV
avdd-sys-1v2: 1200 mV
vdd-pex-1v0: 1050 mV
vddio-sdmmc-ap: 1800 3300 mV at 3300 mV
max77620-ldo3: at 3100 mV
vdd-rtc: 850 1100 mV at 1000 mV
max77620-ldo5: at 3100 mV
vddio-sdmmc3-ap: 1800 3300 mV at 3300 mV
avdd-1v05-pll: 1050 mV
avdd-io-hdmi-dp: 1050 mV
GPIO line 505 (spmic-default-output-high) hogged as output/high
gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio)
max77620 4-003c: max77620 probe successful
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
tegra210_dvfs: no clock found for sdmmc2_ddr
tegra210_dvfs: no clock found for sdmmc4_ddr
tegra210_dvfs: no clock found for sdmmc1_ddr
tegra210_dvfs: no clock found for sdmmc3_ddr
tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe
vdd-3v3-sys: supplied by vdd-5v0-sys
vdd-3v3-sys: 3300 mV
vdd-1v8-sys: supplied by vdd-3v3-sys
vdd-usb-vbus2: supplied by vdd-3v3-sys
vdd-3v3-sd: supplied by vdd-3v3-sys
vdd-3v3-sd: 3300 mV
avdd-io-edp-1v05: supplied by avdd-1v05-pll
avdd-io-edp-1v05: 1050 mV
vdd-usb-hub-en: supplied by vdd-1v8-sys
vdd-usb-hub-en: 5000 mV
camchar: rtcpu character device driver loaded
extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
nvmap_heap_init: nvmap_heap_init: created heap block cache
dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000
dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000)
cma: enabled page replacement for spfn=d7000, epfn=f0000
dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful
tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout
tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048
tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout
nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways
nvmap_page_pool_init: Total RAM pages: 1008803
nvmap_page_pool_init: nvmap page pool size: 126100 pages (492 MB)
nvmap_background_zero_thread: PP zeroing thread starting.
misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB)
thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz
pre_t19x_iso_plat_init(): max_iso_bw=11520000KB
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 6992K
host1x 50000000.host1x: initialized
hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.863:1): initialized
workingset: timestamp_bits=46 max_order=20 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ntfs: driver 2.1.32 [Flags: R/W].
9p: Installing v9fs 9p2000 file system support
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
io scheduler noop registered
io scheduler cfq registered (default)
gic 702f9000.agic: GIC IRQ controller registered
iommu: Adding device 702ef000.adsp to group 32
iommu: Adding device aconnect@702c0000:adsp_audio to group 33
tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered
tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x7207c11
tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4
tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb
tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb
tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb
tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1
tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4
tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4
tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4
tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4
tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb
tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb
tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops
tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000
tegra-pcie 1003000.pcie: 4x1, 1x1 configuration
tegra-pcie 1003000.pcie: PCIE: Enable power rails
tegra-pcie 1003000.pcie: probing port 0, using 4 lanes
tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000
Adding domain tsec-pd to PM domain host1x-pd
tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
tsec 54500000.tsec: initialized
tsec 54100000.tsecb: initialized
Adding domain nvdec-pd to PM domain host1x-pd
nvdec 54480000.nvdec: initialized
Adding domain vic03-pd to PM domain host1x-pd
Adding domain msenc-pd to PM domain host1x-pd
Adding domain nvjpg-pd to PM domain host1x-pd
falcon 54340000.vic: initialized
falcon 544c0000.nvenc: initialized
falcon 54380000.nvjpg: initialized
tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=96
tegra_cec 70015000.tegra_cec: Enable clock result: 0.
tegra_cec 70015000.tegra_cec: tegra_cec_init started
tegradc tegradc.0: disp0 connected to head0->/host1x/sor1
tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0
tegra_cec 70015000.tegra_cec: probed
display board info: id 0x0, fab 0x0
generic_infoframe_type: 0x87
tegradc tegradc.0: DT parsed successfully
tegradc tegradc.0: Display dc.ffffff800abc0000 registered with id=0
tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781
tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
tegradc tegradc.0: probed
tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels
tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled
tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized
pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
kfuse 7000fc00.kfuse: initialized
pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:01:00.0: [1b21:2812] type 01 class 0x060400
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available
tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now
vdd-cpu: 708 1322 mV at 708 mV
pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed
vdd-gpu: applied init 1000000uV constraint
vdd-gpu: 708 1323 mV at 997 mV
pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed
No Device Node present for smmu client: serial8250 !!
platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000)
iommu: Adding device serial8250 to group 34
console [ttyS0] disabled
console [ttyS0] enabled
pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Console: switching to colour frame buffer device 240x67
pci 0000:02:00.0: [1b21:2812] type 01 class 0x060400
tegradc tegradc.0: fb registered
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:02.0: [1b21:2812] type 01 class 0x060400
pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
pci 0000:02:03.0: [1b21:2812] type 01 class 0x060400
pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
pci 0000:02:08.0: [1b21:2812] type 01 class 0x060400
pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
pci 0000:02:0a.0: [1b21:2812] type 01 class 0x060400
pci 0000:02:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:02:0b.0: [1b21:2812] type 01 class 0x060400
pci 0000:02:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:08.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:0a.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:0b.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
pci 0000:04:00.0: [8086:24fd] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[drm] Initialized
tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode.
tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m
tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL.
tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL.
pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
brd: module loaded
loop: module loaded
tegra_profiler: version: 1.143, samples/io: 48/28
tegra_profiler: auth: init
THERMAL EST: found 2 subdevs
THERMAL EST num_resources: 0
[THERMAL EST subdev 0]
[THERMAL EST subdev 1]
thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est
THERMAL EST: thz register success.
THERMAL EST: end of probe, return err: 0
sd: No Scsi addr parsed to reserve index
hisi_sas: driver version v1.6
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
CAN device driver interface
pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05
pci 0000:06:00.0: [1bc0:1002] type 00 class 0x010802
pci 0000:06:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
pci 0000:06:00.0: PME# supported from D0 D3hot
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
Copyright(c) 1999 - 2017 Intel Corporation.
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driver r8152
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP
tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0
tegra-xusb 70090000.xusb: extcon 0: ffffffc0f90de000 id
extcon-disp-state extcon:disp-state: cable 47 state 1
Extcon AUX1(HDMI) enable
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
tegradc tegradc.1: disp1 connected to head1->/host1x/sor
tegradc tegradc.1: No lt-data, using default setting
tegradc tegradc.1: No hpd-gpio in DT
tegradc tegradc.1: DT parsed successfully
tegradc tegradc.1: Display dc.ffffff800d540000 registered with id=1
tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release
tegra-xusb 70090000.xusb: xHCI Host Controller
tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1
tegradc tegradc.1: dpd enable lookup fail:-19
tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010
tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.201-tegra xhci-hcd
usb usb1: SerialNumber: 70090000.xusb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
tegra-xusb 70090000.xusb: xHCI Host Controller
tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.9.201-tegra xhci-hcd
usb usb2: SerialNumber: 70090000.xusb
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
pci 0000:07:00.0: [1912:0015] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0
tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0
tegra-xudc-new 700d0000.xudc: device count: 1
tegra-xudc-new 700d0000.xudc: USB charger detection disabled
tegra-xudc-new 700d0000.xudc: vbus state: 1
tegra-xudc-new 700d0000.xudc: device mode on: 0
tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0
tegra-xudc-new 700d0000.xudc: active: 0 => 1
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver xpad
tegradc tegradc.1: probed
tegradc tegradc.1: fb registered
hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
tegradc tegradc.1: blank - powerdown
extcon-disp-state extcon:disp-state: cable 44 state 0 already set.
Extcon DP: HPD disabled
hpd: hpd_switch 0
hpd: switching from state 0 (Reset) to state 1 (Check Plug)
hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244
pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
pci 0000:08:00.0: [1912:0015] type 00 class 0x0c0330
pci 0000:08:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci_bus 0000:08: busn_res: [bus 08-ff] end is updated to 08
pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 08
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 08
pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:09:00.0: reg 0x10: [io 0x0000-0x00ff]
pci 0000:09:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
pci 0000:09:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci_bus 0000:09: busn_res: [bus 09-ff] end is updated to 09
pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x134fffff]
pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit pref]
pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:01:00.0: BAR 14: assigned [mem 0x13000000-0x134fffff]
pci 0000:02:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff]
pci 0000:02:03.0: BAR 14: assigned [mem 0x13100000-0x131fffff]
pci 0000:02:08.0: BAR 14: assigned [mem 0x13200000-0x132fffff]
pci 0000:02:0a.0: BAR 14: assigned [mem 0x13300000-0x133fffff]
pci 0000:02:0b.0: BAR 14: assigned [mem 0x13400000-0x134fffff]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:04:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit]
pci 0000:02:02.0: PCI bridge to [bus 04]
pci 0000:02:02.0: bridge window [mem 0x13000000-0x130fffff]
pci 0000:05:00.0: BAR 0: assigned [mem 0x13100000-0x13101fff 64bit]
pci 0000:02:03.0: PCI bridge to [bus 05]
pci 0000:02:03.0: bridge window [mem 0x13100000-0x131fffff]
pci 0000:06:00.0: BAR 0: assigned [mem 0x13200000-0x13203fff 64bit]
pci 0000:02:08.0: PCI bridge to [bus 06]
pci 0000:02:08.0: bridge window [mem 0x13200000-0x132fffff]
pci 0000:07:00.0: BAR 0: assigned [mem 0x13300000-0x13301fff 64bit]
pci 0000:02:0a.0: PCI bridge to [bus 07]
pci 0000:02:0a.0: bridge window [mem 0x13300000-0x133fffff]
pci 0000:08:00.0: BAR 0: assigned [mem 0x13400000-0x13401fff 64bit]
pci 0000:02:0b.0: PCI bridge to [bus 08]
pci 0000:02:0b.0: bridge window [mem 0x13400000-0x134fffff]
pci 0000:01:00.0: PCI bridge to [bus 02-08]
pci 0000:01:00.0: bridge window [mem 0x13000000-0x134fffff]
pci 0000:00:01.0: PCI bridge to [bus 01-08]
pci 0000:00:01.0: bridge window [mem 0x13000000-0x134fffff]
pci 0000:09:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
pci 0000:09:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref]
pci 0000:09:00.0: BAR 0: assigned [io 0x1000-0x10ff]
pci 0000:00:02.0: PCI bridge to [bus 09]
pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref]
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:02.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:03.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:08.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:0a.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:0b.0: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
aer 0000:00:01.0:pcie002: service driver aer loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
aer 0000:00:02.0:pcie002: service driver aer loaded
pci 0000:05:00.0: enabling device (0000 -> 0002)
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000490
xhci_hcd 0000:05:00.0: irq 82, io mem 0x13100000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.9.201-tegra xhci-hcd
usb usb3: SerialNumber: 0000:05:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.9.201-tegra xhci-hcd
usb usb4: SerialNumber: 0000:05:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
nvme nvme0: pci function 0000:06:00.0
nvme 0000:06:00.0: enabling device (0000 -> 0002)
pci 0000:07:00.0: enabling device (0000 -> 0002)
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:07:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000490
xhci_hcd 0000:07:00.0: irq 82, io mem 0x13300000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.9.201-tegra xhci-hcd
usb usb5: SerialNumber: 0000:07:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.9.201-tegra xhci-hcd
usb usb6: SerialNumber: 0000:07:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
pci 0000:08:00.0: enabling device (0000 -> 0002)
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 7
xhci_hcd 0000:08:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000490
xhci_hcd 0000:08:00.0: irq 82, io mem 0x13400000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 4.9.201-tegra xhci-hcd
usb usb7: SerialNumber: 0000:08:00.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 8
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.9.201-tegra xhci-hcd
usb usb8: SerialNumber: 0000:08:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
r8168 0000:09:00.0: enabling device (0000 -> 0003)
r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1
tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2
usb usb2: usb_suspend_both: status 0
r8168 0000:09:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node
r8168 0000:09:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:ea:42:52 from device tree
r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
r8168 Copyright (C) 2017 Realtek NIC software team
This program comes with ABSOLUTELY NO WARRANTY; for details, please see .
This is free software, and you are welcome to redistribute it under certain conditions; see .
tegradc tegradc.0: blank - powerdown
max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
rtc rtc1: alarm rtc device
tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
i2c /dev entries driver
i2c i2c-6: Added multiplexed i2c bus 7
i2c i2c-6: Added multiplexed i2c bus 8
i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter
imx219 7-0010: tegracam sensor driver:imx219_v2.0.6
tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10
imx219 7-0010: imx219_board_setup: error during i2c read probe (-121)
imx219 7-0010: board setup failed
imx219: probe of 7-0010 failed with error -121
imx219 8-0010: tegracam sensor driver:imx219_v2.0.6
usb usb4: usb_suspend_both: status 0
extcon-disp-state extcon:disp-state: cable 47 state 0
Extcon AUX1(HDMI) disable
usb usb6: usb_suspend_both: status 0
usb usb5: usb_suspend_both: status 0
tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10
imx219 8-0010: imx219_board_setup: error during i2c read probe (-121)
imx219 8-0010: board setup failed
imx219: probe of 8-0010 failed with error -121
max77620-power max77620-power: Event recorder REG_NVERC : 0x0
tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2
tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4
tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC
tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC
tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC
tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC
tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC
tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature
tegra_soctherm 700e2000.soctherm: failed to register sensor: -19
tegra_aotag tegra-aotag: Registering sensor 0
tegra_aotag tegra-aotag: Invalid temp readout
tegra_aotag tegra-aotag: Invalid temp readout
tegra_aotag tegra-aotag: Bound to TZ : ID 0
tegra_aotag tegra-aotag: Probe done [SUCCESS]:0
tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered
tegra_aotag tegra-aotag: Invalid temp readout
tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered
parse_throttle_dt_data: Num cap clks = 6
parse_throttle_dt_data: clk=cclk_g type=2
parse_throttle_dt_data: clk=gpu type=4
parse_throttle_dt_data: clk=cap.throttle.c2bus type=0
parse_throttle_dt_data: clk=cap.throttle.c3bus type=0
parse_throttle_dt_data: clk=cap.throttle.sclk type=0
parse_throttle_dt_data: clk=emc type=3
tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
tegra_throttle_probe: probe successful. #cdevs=4
FAN dev name: pwm-fan
FAN:gpio request success.
pwm_fan_driver pwm-fan: cap state:7, cap pwm:255
pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal
pwm_fan_driver pwm-fan: fan tach request irq success
pwm_fan_driver pwm-fan: tach period: 1000
pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
usb usb8: usb_suspend_both: status 0
tegra210-cpufreq cpufreq: probe()...completed
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful
sdhci-tegra sdhci-tegra.2: Client registration for eMC Successful
tegradc tegradc.0: unblank
tegra-se 70012000.se: tegra_se_probe: complete
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
tegra21x_actmon 6000c800.actmon: in actmon_register()...
tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all
nvpmodel: initialized successfully
usbcore: registered new interface driver snd-usb-audio
No Device Node present for smmu client: snd-soc-dummy !!
platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
iommu: Adding device snd-soc-dummy to group 35
input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0
OPE platform probe
OPE platform probe successful
OPE platform probe
OPE platform probe successful
tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000
tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m
nvme0n1: p1 p2
tegradc tegradc.0: hdmi: get YCC quant from EDID.
mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr
mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA 64-bit with 64 bit addr
tegra-asoc: sound: ADMAIF1 ADMAIF1 mapping ok
tegra-asoc: sound: ADMAIF2 ADMAIF2 mapping ok
tegra-asoc: sound: ADMAIF3 ADMAIF3 mapping ok
tegra-asoc: sound: ADMAIF4 ADMAIF4 mapping ok
tegra-asoc: sound: ADMAIF5 ADMAIF5 mapping ok
tegra-asoc: sound: ADMAIF6 ADMAIF6 mapping ok
tegra-asoc: sound: ADMAIF7 ADMAIF7 mapping ok
tegra-asoc: sound: ADMAIF8 ADMAIF8 mapping ok
tegra-asoc: sound: ADMAIF9 ADMAIF9 mapping ok
tegra-asoc: sound: ADMAIF10 ADMAIF10 mapping ok
extcon-disp-state extcon:disp-state: cable 47 state 1
Extcon AUX1(HDMI) enable
u32 classifier
Actions configured
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: netlink gateway (rev 20130117) max_hops=1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
9pnet: Installing 9P2000 support
Key type dns_resolver registered
Registered cp15_barrier emulation handler
Registered setend emulation handler
registered taskstats version 1
Adding domain ve2-pd to PM domain host1x-pd
Adding domain ve-pd to PM domain host1x-pd
isp 54600000.isp: initialized
isp 54680000.isp: initialized
tegradc tegradc.0: sync windows ret = 247
usb usb7: usb_suspend_both: status 0
last reset is due to software reset
KERNEL: PMC reset status reg: 0x3
BL: PMC reset status reg: 0x3
BL: PMIC poweroff Event Recorder: 0x0
clk_cbus_recalc_rate: no gbus parent
clk_cbus_round_rate: no gbus parent
clk_cbus_round_rate: no gbus parent
clk_cbus_recalc_rate: no gbus parent
clk_cbus_recalc_rate: no gbus parent
clk_cbus_round_rate: no gbus parent
clk_cbus_round_rate: no gbus parent
clk_cbus_recalc_rate: no gbus parent
tegra_dvfs: GPU-cap: registered
tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled
tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled
tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV, scaling enabled
tegra_dvfs: vdd-gpu-vts: registered
tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered
tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered
input: gpio-keys as /devices/gpio-keys/input/input1
mmc0: new HS400 Enhanced strobe MMC card at address 0001
mmcblk0: mmc0:0001 DG4016 14.7 GiB
mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB
usb 1-2: new high-speed USB device number 2 using tegra-xusb
mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
tegra_rtc 7000e000.rtc: setting system clock to 2021-08-30 06:23:03 UTC (1630304583)
extcon-disp-state extcon:disp-state: cable 51 state 1
Extcon HDMI: HPD enabled
tegradc tegradc.0: hdmi: plugged
vi 54080000.vi: vi_probe: ++
usb 1-2: New USB device found, idVendor=0451, idProduct=8027
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-2: SerialNumber: 5F0300817489
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 2 ports detected
vi 54080000.vi: initialized
vi 54080000.vi: subdev nvcsi--2 bound
vi 54080000.vi: subdev nvcsi--1 bound
mmcblk mmc0:0001: Card claimed for testing.
Disable partitions left on by BL
disb
bwmgr: missing cdev-type property
tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
DRAM derating cdev registered.
ALSA device list:
#0: tegra-hda at 0x70038000 irq 81
#1: tegra-snd-t210ref-mobile-rt565x
Freeing unused kernel memory: 8640K
Root device found: nvme0n1p1
Found dev node: /dev/nvme0n1p1
EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
Rootfs mounted over nvme0n1p1
usb 3-2: new full-speed USB device number 2 using xhci_hcd
Switching from initrd to actual rootfs
usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb
tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1
usb 3-2: New USB device found, idVendor=0b95, idProduct=6808
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Virtual HUB Ver:0.01
usb 3-2: Manufacturer: ASIX Electronics
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 7 ports detected
usb 2-1: New USB device found, idVendor=0451, idProduct=8025
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 2 ports detected
usb 1-2: usb_suspend_both: status 0
ip_tables: (C) 2000-2006 Netfilter Core Team
cgroup: cgroup2: unknown option "nsdelegate"
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured.
systemd[1]: Set hostname to .
systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
usb 1-3: new full-speed USB device number 3 using tegra-xusb
usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: usb_suspend_both: status 0
usb usb2: usb_suspend_both: status 0
systemd[1]: Configuration file /etc/systemd/system/[email protected]/autologin.conf is marked executable. Please remove executable permission bits. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice System Slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Socket (/dev/log).
EXT4-fs (nvme0n1p1): re-mounted. Opts: (null)
usb 7-1: new high-speed USB device number 2 using xhci_hcd
usb 7-1: New USB device found, idVendor=0781, idProduct=5591
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1: Product: Ultra USB 3.0
usb 7-1: Manufacturer: SanDisk
usb 7-1: SerialNumber: 0101a0a04fdff8c43af00ff96887c27d98f9bfc0db24893b11e4c7033f84c78c0c45000000000000000000004cd27becff8b2d009155810787270b4b
usb 3-2.1: new full-speed USB device number 3 using xhci_hcd
usb-storage 7-1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 7-1:1.0
nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1)
tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
cpu-throttle-alert cooling device registered.
tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
gpu-throttle-alert cooling device registered.
tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
hot-surface-alert cooling device registered.
usb 3-2.1: New USB device found, idVendor=046d, idProduct=c077
usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2.1: Product: USB Optical Mouse
usb 3-2.1: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/1003000.pcie/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:03.0/0000:05:00.0/usb3/3-2/3-2.1/3-2.1:1.0/0003:046D:C077.0001/input/input2
hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:05:00.0-2.1/input0
tegra_cec 70015000.tegra_cec: physical address: 20:00.
usb 3-2.2: new full-speed USB device number 4 using xhci_hcd
tegra_cec 70015000.tegra_cec: Sent res: -113.
tegra_cec 70015000.tegra_cec: tegra_cec_init Done.
usb 3-2.2: New USB device found, idVendor=1a2c, idProduct=0e24
usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2.2: Product: USB Keyboard
usb 3-2.2: Manufacturer: SEM
input: SEM USB Keyboard as /devices/1003000.pcie/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:03.0/0000:05:00.0/usb3/3-2/3-2.2/3-2.2:1.0/0003:1A2C:0E24.0002/input/input3
systemd-journald[2067]: Received request to flush runtime journal from PID 1
hid-generic 0003:1A2C:0E24.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:05:00.0-2.2/input0
input: SEM USB Keyboard as /devices/1003000.pcie/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:03.0/0000:05:00.0/usb3/3-2/3-2.2/3-2.2:1.1/0003:1A2C:0E24.0003/input/input4
hid-generic 0003:1A2C:0E24.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:05:00.0-2.2/input1
using random self ethernet address
using random host ethernet address
scsi 0:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6
sd 0:0:0:0: [sda] 120176640 512-byte logical blocks: (61.5 GB/57.3 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
Mass Storage Function, version: 2009/09/11
LUN: removable file: (no medium)
using random self ethernet address
using random host ethernet address
rndis0: HOST MAC e2:52:62:7b:34:d0
rndis0: MAC e2:52:62:7b:34:d1
usb0: HOST MAC e2:52:62:7b:34:d2
usb0: MAC e2:52:62:7b:34:d3
tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled
l4tbr0: port 1(rndis0) entered blocking state
l4tbr0: port 1(rndis0) entered disabled state
device rndis0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
l4tbr0: port 2(usb0) entered blocking state
l4tbr0: port 2(usb0) entered disabled state
device usb0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
zram: Added device: zram0
zram: Added device: zram1
zram: Added device: zram2
zram: Added device: zram3
android_work: did not send uevent (0 0 (null))
zram0: detected capacity change from 0 to 518508544
Adding 506352k swap on /dev/zram0. Priority:5 extents:1 across:506352k SS
android_work: sent uevent USB_STATE=CONNECTED
zram1: detected capacity change from 0 to 518508544
Adding 506352k swap on /dev/zram1. Priority:5 extents:1 across:506352k SS
android_work: sent uevent USB_STATE=DISCONNECTED
zram2: detected capacity change from 0 to 518508544
Adding 506352k swap on /dev/zram2. Priority:5 extents:1 across:506352k SS
zram3: detected capacity change from 0 to 518508544
Adding 506352k swap on /dev/zram3. Priority:5 extents:1 across:506352k SS
android_work: sent uevent USB_STATE=CONNECTED
configfs-gadget gadget: high-speed config #1: c
tegra-xudc-new 700d0000.xudc: ep 5 (type: 3, dir: in) enabled
tegra-xudc-new 700d0000.xudc: ep 3 (type: 2, dir: in) enabled
tegra-xudc-new 700d0000.xudc: ep 2 (type: 2, dir: out) enabled
tegra-xudc-new 700d0000.xudc: ep 9 (type: 3, dir: in) enabled
tegra-xudc-new 700d0000.xudc: ep 7 (type: 2, dir: in) enabled
tegra-xudc-new 700d0000.xudc: ep 4 (type: 2, dir: out) enabled
tegra-xudc-new 700d0000.xudc: ep 15 (type: 3, dir: in) enabled
tegra-xudc-new 700d0000.xudc: ep 11 (type: 2, dir: in) enabled
tegra-xudc-new 700d0000.xudc: ep 6 (type: 2, dir: out) enabled
IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
android_work: sent uevent USB_STATE=CONFIGURED
tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled
tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled
IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
tegra-xudc-new 700d0000.xudc: ep 13 disabled
tegra-xudc-new 700d0000.xudc: ep 8 disabled
tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled
tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:04:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2
iwlwifi 0000:04:00.0: Falling back to user helper
spidev: module is already loaded
spidev: module is already loaded
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0: 0xffffff800a913000, 00:04:4b:ea:42:52, IRQ 428
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usbcore: registered new interface driver btusb
Bluetooth: hci0: Firmware revision 0.1 build 226 week 17 2018
iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2
iwlwifi 0000:04:00.0: Falling back to user helper
iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2
iwlwifi 0000:04:00.0: Falling back to user helper
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP socket layer initialized
iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2
iwlwifi 0000:04:00.0: Falling back to user helper
iwlwifi 0000:04:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm
iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone6: failed to read out thermal zone (-5)
thermal thermal_zone6: Registering thermal zone thermal_zone6 for type iwlwifi
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8168: eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
l4tbr0: port 2(usb0) entered blocking state
l4tbr0: port 2(usb0) entered forwarding state
l4tbr0: port 1(rndis0) entered blocking state
l4tbr0: port 1(rndis0) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready
iwlwifi 0000:04:00.0: Getting the temperature timed out
tegradc tegradc.0: unblank
tegradc tegradc.1: blank - powerdown
fuse init (API version 7.26)
tegradc tegradc.0: unblank
tegradc tegradc.1: blank - powerdown
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
vdd-usb-vbus: disabling
vdd-usb-vbus2: disabling
vddio-sdmmc-ap: disabling
vdd-3v3-sd: disabling
avdd-io-edp-1v05: disabling
vdd-usb-hub-en: disabling
iwlwifi 0000:04:00.0: Getting the temperature timed out
iwlwifi 0000:04:00.0: Getting the temperature timed out
usb 7-1: USB disconnect, device number 2
usb usb7: usb_suspend_both: status 0
iwlwifi 0000:04:00.0: Getting the temperature timed out
usb 8-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 8-2: New USB device found, idVendor=196d, idProduct=0201
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-2: Product: USB Drive 3ME
usb 8-2: Manufacturer: Innodisk
usb 8-2: SerialNumber: 20191123AA10H7392006
usb-storage 8-2:1.0: USB Mass Storage device detected
scsi host0: usb-storage 8-2:1.0
scsi 0:0:0:0: Direct-Access Innodisk USB Drive 3ME 0917 PQ: 0 ANSI: 6
sd 0:0:0:0: [sda] 31686656 512-byte logical blocks: (16.2 GB/15.1 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 22 00 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI removable disk
EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null)
usb 6-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 6-2: New USB device found, idVendor=196d, idProduct=0201
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-2: Product: USB Drive 3ME
usb 6-2: Manufacturer: Innodisk
usb 6-2: SerialNumber: 20191123AA10H7392008
usb-storage 6-2:1.0: USB Mass Storage device detected
scsi host1: usb-storage 6-2:1.0
scsi 1:0:0:0: Direct-Access Innodisk USB Drive 3ME 0917 PQ: 0 ANSI: 6
sd 1:0:0:0: [sdb] 31686656 512-byte logical blocks: (16.2 GB/15.1 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 22 00 00 00
sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (sdb): recovery complete
EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
iwlwifi 0000:04:00.0: Getting the temperature timed out
iwlwifi 0000:04:00.0: Getting the temperature timed out
iwlwifi 0000:04:00.0: Getting the temperature timed out
iwlwifi 0000:04:00.0: Getting the temperature timed out
iwlwifi 0000:04:00.0: Getting the temperature timed out
iwlwifi 0000:04:00.0: Getting the temperature timed out
iwlwifi 0000:04:00.0: Getting the temperature timed out
iwlwifi 0000:04:00.0: Getting the temperature timed out
iwlwifi 0000:04:00.0: Getting the temperature timed out
iwlwifi 0000:04:00.0: Getting the temperature timed out
iwlwifi 0000:04:00.0: Getting the temperature timed out
iwlwifi 0000:04:00.0: Getting the temperature timed out
iwlwifi 0000:04:00.0: Getting the temperature timed out
iwlwifi 0000:04:00.0: Getting the temperature timed out