dmesg - LPDDR4
Booting Linux on physical CPU 0x100
Linux version 4.9.201-tegra (root@jimmyfang-virtual-machine) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Jul 7 15:31:59 CST 2021
Boot CPU: AArch64 Processor [411fd073]
OF: fdt:memory scan node memory@80000000, reg size 80,
OF: fdt: - 80000000 , 70000000
OF: fdt: - f0200000 , 85600000
OF: fdt: - 175e00000 , 200000
OF: fdt: - 176600000 , 200000
OF: fdt: - 177000000 , 200000
earlycon: uart8250 at MMIO32 0x0000000003100000 (options '')
bootconsole [uart8250] enabled
Found tegra_fbmem: 00800000@96081000
Found lut_mem: 00002008@9607e000
OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB
OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
cma: Reserved 64 MiB at 0x00000000fc000000
On node 0 totalpages: 1004541
DMA zone: 8192 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 521725 pages, LIFO batch:31
Normal zone: 7624 pages used for memmap
Normal zone: 482816 pages, LIFO batch:31
psci: probing for conduit method from DT.
psci: PSCIv1.0 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.1
percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304
pcpu-alloc: s57560 r8192 d32552 u98304 alloc=24*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
Speculative Store Bypass Disable mitigation not required
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 988725
Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96081000 lut_mem=0x2008@0x9607e000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/nvme0n1p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
log_buf_len individual max cpu contribution: 32768 bytes
log_buf_len total cpu_extra contributions: 163840 bytes
log_buf_len min size: 32768 bytes
log_buf_len: 262144 bytes
early log buf free: 29280(89%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 3147776K/4018164K available (15358K kernel code, 2952K rwdata, 6808K rodata, 8640K init, 635K bss, 116724K reserved, 753664K cma-reserved)
Virtual kernel memory layout:
modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
.text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB)
.rodata : 0xffffff8008f80000 - 0xffffff8009630000 ( 6848 KB)
.init : 0xffffff8009630000 - 0xffffff8009ea0000 ( 8640 KB)
.data : 0xffffff8009ea0000 - 0xffffff800a182008 ( 2953 KB)
.bss : 0xffffff800a182008 - 0xffffff800a220e5c ( 636 KB)
fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
0xffffffbf00000000 - 0xffffffbf03dc8000 ( 61 MB actual)
memory : 0xffffffc000000000 - 0xffffffc0f7200000 ( 3954 MB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
NR_IRQS:64 nr_irqs:64 0
GIC: Using split EOI/Deactivate mode
arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns
sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns
Console: colour dummy device 80x25
console [tty0] enabled
bootconsole [uart8250] disabled
kmemleak: Kernel memory leak detector disabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
ftrace: allocating 47485 entries in 186 pages
sched-energy: Sched-energy-costs installed from DT
ASID allocator initialised with 65536 entries
tegra-id: chipid=21817.
tegra-id: opt_subrevision=1.
Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0
DTS File Name: /home/jimmyfang/Jetson/R32.5.1_TX2-NX/JetPack_4.5.1_Linux_JETSON_TX2_NX/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/R32_5_1_TX2-NX_AIE-CT42_1.dts
DTB Build time: Jul 7 2021 15:32:19
CPU1: Booted secondary processor [4e0f0030]
CPU2: Booted secondary processor [4e0f0030]
CPU3: Booted secondary processor [411fd073]
CPU4: Booted secondary processor [411fd073]
CPU5: Booted secondary processor [411fd073]
Brought up 6 CPUs
SMP: Total of 6 processors activated.
CPU features: detected feature: 32-bit EL0 Support
CPU: All CPU(s) started at EL2
alternatives: patching kernel code
devtmpfs: initialized
Initilizing CustomIPI irq domain
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
OS set in device tree is not L4T.
regulator-dummy: no parameters
Initializing plugin-manager
Plugin module not found
Plugin-manager status disabled
NET: Registered protocol family 16
pstore: using zlib compression
console [pstore-1] enabled
pstore: Registered ramoops as persistent store backend
ramoops: attached 0x200000@0x175880000, ecc: 0/0
cpuidle: using governor menu
bpmp: waiting for handshake
bpmp: handshake completed
bpmp: synchronizing channels
bpmp: channels synchronized
bpmp: mail init ok
arm-smmu 12000000.iommu: probing hardware configuration...
arm-smmu 12000000.iommu: SMMUv2 with:
arm-smmu 12000000.iommu: stage 1 translation
arm-smmu 12000000.iommu: stage 2 translation
arm-smmu 12000000.iommu: nested translation
arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80
arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)!
arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only)
arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA
arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA
vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009ea4000)
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
Registering BPMP clocks...
tegra_bpmp_clk_init: clock init ok (638 clks)
tegra_powergate_init: DONE
DTS File Name: /home/jimmyfang/Jetson/R32.5.1_TX2-NX/JetPack_4.5.1_Linux_JETSON_TX2_NX/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/R32_5_1_TX2-NX_AIE-CT42_1.dts
DTB Build time: Jul 7 2021 15:32:19
Tegra reboot handler registered.
tegra-pmc c360000.pmc: scratch reg offset dts data not present
tegra-pmc: get_secure_pmc_setting: done secure_pmc=0
tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET
tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0
tegra-pmc: ### PMC reset status reg: 0x0
padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
tegra-pmc c360000.pmc: IO padctrl driver initialized
iommu: Adding device 3460000.sdhci to group 0
iommu: Adding device 3160000.i2c to group 1
iommu: Adding device c240000.i2c to group 2
iommu: Adding device 3180000.i2c to group 3
iommu: Adding device 3190000.i2c to group 4
iommu: Adding device 31b0000.i2c to group 5
iommu: Adding device 31c0000.i2c to group 6
iommu: Adding device c250000.i2c to group 7
iommu: Adding device 31e0000.i2c to group 8
iommu: Adding device 3210000.spi to group 9
iommu: Adding device 3240000.spi to group 10
iommu: Adding device 3100000.serial to group 11
iommu: Adding device 3110000.serial to group 12
iommu: Adding device c280000.serial to group 13
iommu: Adding device 3130000.serial to group 14
iommu: Adding device 2490000.ether_qos to group 15
arm-smmu: forcing sodev map for 2490000.ether_qos
iommu: Adding device b000000.rtcpu to group 16
iommu: Adding device 13e10000.host1x to group 17
iommu: Adding device 13e10000.host1x:ctx0 to group 18
iommu: Adding device 13e10000.host1x:ctx1 to group 19
iommu: Adding device 13e10000.host1x:ctx2 to group 20
iommu: Adding device 13e10000.host1x:ctx3 to group 21
iommu: Adding device 13e10000.host1x:ctx4 to group 22
iommu: Adding device 13e10000.host1x:ctx5 to group 23
iommu: Adding device 13e10000.host1x:ctx6 to group 24
iommu: Adding device 13e10000.host1x:ctx7 to group 25
iommu: Adding device 150c0000.nvcsi to group 26
iommu: Adding device 15700000.vi to group 27
iommu: Adding device 15600000.isp to group 28
iommu: Adding device 15200000.nvdisplay to group 29
platform 15200000.nvdisplay: OF IOVA linear map 0x96081000 size (0x800000)
platform 15200000.nvdisplay: OF IOVA linear map 0x9607e000 size (0x2008)
iommu: Adding device 15210000.nvdisplay to group 30
platform 15210000.nvdisplay: OF IOVA linear map 0x96081000 size (0x800000)
arm__alloc_iova_at():136: iova alloc don't match, dh=0x0000000096081000, da=0x000000009587e000
platform 15210000.nvdisplay: OF IOVA linear map 0x9607e000 size (0x2008)
arm__alloc_iova_at():136: iova alloc don't match, dh=0x000000009607e000, da=0x000000009607b000
iommu: Adding device 15340000.vic to group 31
iommu: Adding device 154c0000.nvenc to group 32
iommu: Adding device 15480000.nvdec to group 33
iommu: Adding device 15380000.nvjpg to group 34
iommu: Adding device 15500000.tsec to group 35
iommu: Adding device 15100000.tsecb to group 36
iommu: Adding device 15810000.se to group 37
iommu: Adding device 15820000.se to group 38
iommu: Adding device 15830000.se to group 39
iommu: Adding device 15840000.se to group 40
iommu: Adding device smmu_test to group 41
mc: mapped MMIO address: 0xffffff800a710000 -> 0x2c10000
mc: mapped MMIO address: 0xffffff800a730000 -> 0x2c20000
mc: mapped MMIO address: 0xffffff800a750000 -> 0x2c30000
mc: mapped MMIO address: 0xffffff800a770000 -> 0x2c40000
mc: mapped MMIO address: 0xffffff800a790000 -> 0x2c50000
nv-tegra-mc 2c10000.mc: No mssnvlink node
mc-err: mcerr ops are set to t18x
dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c
iommu: Adding device 3530000.xhci to group 42
arm-smmu: forcing sodev map for 3530000.xhci
iommu: Adding device 3550000.xudc to group 43
arm-smmu: forcing sodev map for 3550000.xudc
tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a
tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3
tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256
iommu: Adding device 17000000.gp10b to group 44
tegra-reset 5000000.clock: registered 193 resets.
iommu: Adding device d000000.bpmp to group 45
bpmp: ping status is 0
bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f
bpmp d000000.bpmp: probe ok
iommu: Adding device 2600000.dma to group 46
GPIO line 424 (camera-control-output-low) hogged as output/low
GPIO line 427 (camera-control-output-low) hogged as output/low
GPIO line 408 (w-disable1) hogged as output/high
GPIO line 410 (w-disable2) hogged as output/high
gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio)
gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon)
iommu: Adding device 10003000.pcie-controller to group 47
arm-smmu: forcing sodev map for 10003000.pcie-controller
iommu: Adding device sound to group 48
iommu: Adding device 3510000.hda to group 49
iommu: Adding device c1a0000.aon to group 50
vdd-1v8-ap: 1800 mV
vdd-ac-bat: 5000 mV
vdd-3v3-cvb: 3300 mV
vdd-3v3-cvb: 3300 mV
vdd-3v3-cvb: Failed to create debugfs directory
vdd-1v8-cvb: 1800 mV
vdd-fan: 5000 mV
vdd-hdmi-5v0: 5000 mV
vdd_sys_en: 1200 mV
HugeTLB registered 2 MB page size, pre-allocated 0 pages
eventlib_kernel: keventlib is initialized, test id: 0
random: fast init done
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8
vddio-ddr: at 1125 mV
avdd_dsi_csi: 1200 mV
vdd-1v8: 1800 mV
vdd-3v3-sys: 3300 mV
spmic-ldo0: at 1800 mV
spmic-ldo1: at 800 mV
vddio-3v3: 3300 mV
vddio-sdmmc1: 1800 3300 mV at 3300 mV
vdd-rtc: at 800 mV
avdd-ts-hv: 1800 3300 mV at 1800 mV
spmic-ldo6: at 800 mV
vdd-pex-1v00: 1000 mV
dvdd-pex: 1000 mV
GPIO line 253 (spmic_gpio_input) hogged as input
GPIO line 254 (spmic_gpio_input) hogged as input
gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio)
max77620 4-003c: max77620 probe successful
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated
tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec
tegra_wdt_t18x 30c0000.watchdog: Registered successfully
trusty trusty: trusty version: Built: 08:40:58 Feb 19 2021
trusty trusty: selected api version: 3 (requested 3)
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
vdd-sys-bl: 3300 mV
camchar: rtcpu character device driver loaded
gpio tegra-gpio wake61 for gpio=92(L:4)
extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
nvmap_heap_init: nvmap_heap_init: created heap block cache
dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000
cma: enabled page replacement for spfn=c6000, epfn=f0000
dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful
nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc
nvmap_page_pool_init: Total RAM pages: 975360
nvmap_page_pool_init: nvmap page pool size: 121920 pages (476 MB)
nvmap_background_zero_thread: PP zeroing thread starting.
misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB)
tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels
thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm
thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm
thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
la/ptsa driver initialized.
pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz
pre_t19x_iso_plat_init(): max_iso_bw=23040000KB
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 7064K
host1x 13e10000.host1x: initialized
hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.788:1): initialized
workingset: timestamp_bits=46 max_order=20 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ntfs: driver 2.1.32 [Flags: R/W].
9p: Installing v9fs 9p2000 file system support
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
io scheduler noop registered
io scheduler cfq registered (default)
gic 2a41000.agic-controller: GIC IRQ controller registered
iommu: Adding device aconnect@2a41000:adsp_audio to group 51
iommu: Adding device 2993000.adsp to group 52
tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered
tegra-pwm 3280000.pwm: PWM clk can sleep in ops
tegra-pwm 3290000.pwm: PWM clk can sleep in ops
tegra-pwm 32a0000.pwm: PWM clk can sleep in ops
tegra-pwm c340000.pwm: PWM clk can sleep in ops
tegra-pcie 10003000.pcie-controller: 2x1, 1x1, 1x1 configuration
tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails
tegra-pcie 10003000.pcie-controller: probing port 0, using 2 lanes
tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000
tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes
tsec 15500000.tsec: initialized
tsec 15100000.tsecb: initialized
nvdec 15480000.nvdec: initialized
falcon 15340000.vic: initialized
falcon 154c0000.nvenc: initialized
falcon 15380000.nvjpg: initialized
iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56)
iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57)
iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58)
iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59)
iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60)
iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61)
iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62)
iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63)
tegradccommon 15200000.dc_common: host1x channel mapped
tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated
tegradccommon 15200000.dc_common: dma mapping done
tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1
generic_infoframe_type: 0x87
tegradc 15200000.nvdisplay: DT parsed successfully
tegradc 15200000.nvdisplay: Display dc.ffffff800abe0000 registered with id=0
tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s
tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz
tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz
tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0
tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0
tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937
tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board
tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed
tegradc 15200000.nvdisplay: probed
tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels
tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled
tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized
kfuse 3830000.kfuse: initialized
tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
console [ttyS0] disabled
Console: switching to colour frame buffer device 240x67
tegradc 15200000.nvdisplay: fb registered
gpio tegra-gpio wake21 for gpio=121(P:1)
tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd
tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd
Parent Clock set for DC plld2
console [ttyS0] enabled
[drm] Initialized
tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m
tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL.
tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL.
brd: module loaded
extcon-disp-state external-connection:disp-state: cable 47 state 1
Extcon AUX1(HDMI) enable
tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor
tegradc 15210000.nvdisplay: DT parsed successfully
tegradc 15210000.nvdisplay: Display dc.ffffff800af10000 registered with id=1
tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1
tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1
tegradc 15210000.nvdisplay: probed
tegradc 15210000.nvdisplay: fb registered
loop: module loaded
tegra_profiler: version: 1.143, samples/io: 48/28
tegra_profiler: auth: init
THERMAL EST: found 3 subdevs
THERMAL EST num_resources: 0
[THERMAL EST subdev 0]
[THERMAL EST subdev 1]
[THERMAL EST subdev 2]
THERMAL EST: Found 2 profiles, default profile is quiet
thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est
THERMAL EST: thz register success.
hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
tegradc 15210000.nvdisplay: blank - powerdown
extcon-disp-state external-connection:disp-state: cable 44 state 0 already set.
Extcon DP: HPD disabled
hpd: hpd_switch 0
hpd: switching from state 0 (Reset) to state 1 (Check Plug)
hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
THERMAL EST: end of probe, return err: 0
sd: No Scsi addr parsed to reserve index
hisi_sas: driver version v1.6
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
CAN device driver interface
Message RAM Configuration
| base addr |0x0c312000|
| sidfc_flssa |0x00000000|
| xidfc_flesa |0x00000040|
| rxf0c_f0sa |0x000000c0|
| rxf1c_f1sa |0x000009c0|
| rxbc_rbsa |0x000009c0|
| txefc_efsa |0x000009c0|
| txbc_tbsa |0x00000a40|
| tmc_tmsa |0x00000ec0|
Release 3.2.0 from 19.12.2014
net can0: mttcan device registered (regs=ffffff800a62a000, irq=384)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
Copyright(c) 1999 - 2017 Intel Corporation.
tegradc 15200000.nvdisplay: blank - powerdown
extcon-disp-state external-connection:disp-state: cable 47 state 0
Extcon AUX1(HDMI) disable
tegra_nvdisp_handle_pd_disable: Powergated Head1 pd
tegra_nvdisp_handle_pd_disable: Powergated Head0 pd
tegradc 15200000.nvdisplay: unblank
tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd
tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd
Parent Clock set for DC plld2
tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m
tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID.
tegra-pcie 10003000.pcie-controller: link 2 down, retrying
extcon-disp-state external-connection:disp-state: cable 47 state 1
Extcon AUX1(HDMI) enable
eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2)
eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg
eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 3b 72 ac
libphy: dwc_phy: probed
tegradc 15200000.nvdisplay: sync windows ret = 247
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driver r8152
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP
tegra-xusb 3530000.xhci: extcon 0: ffffffc0ef99e800 id
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
tegra-xudc-new 3550000.xudc: device count: 1
tegra-xusb 3530000.xhci: Firmware timestamp: 2019-10-31 05:52:15 UTC, Version: 55.17 release
tegra-xusb 3530000.xhci: xHCI Host Controller
tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1
tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810
tegra-xusb 3530000.xhci: irq 67, io mem 0x03530000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.201-tegra xhci-hcd
usb usb1: SerialNumber: 3530000.xhci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
tegra-xudc-new 3550000.xudc: USB charger detection disabled
tegra-xudc-new 3550000.xudc: vbus state: 1
tegra-xudc-new 3550000.xudc: device mode on: 0
tegra-xudc-new 3550000.xudc: active: 0 => 1
tegra-xusb 3530000.xhci: xHCI Host Controller
tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.9.201-tegra xhci-hcd
usb usb2: SerialNumber: 3530000.xhci
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver xpad
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
Wake76 for irq=199
Wake77 for irq=199
Wake78 for irq=199
Wake79 for irq=199
Wake80 for irq=199
Wake81 for irq=199
Wake82 for irq=199
tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0
tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0
extcon-disp-state external-connection:disp-state: cable 51 state 1
Extcon HDMI: HPD enabled
tegradc 15200000.nvdisplay: hdmi: plugged
max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
Wake73 for irq=42
rtc rtc1: alarm rtc device
tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1
tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock
i2c /dev entries driver
usb usb2: usb_suspend_both: status 0
i2c i2c-2: Added multiplexed i2c bus 9
i2c i2c-2: Added multiplexed i2c bus 10
i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter
imx219 9-0010: tegracam sensor driver:imx219_v2.0.6
tegra-i2c 3180000.i2c: no acknowledge from address 0x10
imx219 9-0010: imx219_board_setup: error during i2c read probe (-121)
imx219 9-0010: board setup failed
imx219: probe of 9-0010 failed with error -121
imx219 10-0010: tegracam sensor driver:imx219_v2.0.6
tegra-i2c 3180000.i2c: no acknowledge from address 0x10
imx219 10-0010: imx219_board_setup: error during i2c read probe (-121)
imx219 10-0010: board setup failed
imx219: probe of 10-0010 failed with error -121
max77620-power max77620-power: Event recorder REG_NVERC : 0x0
parse_throttle_dt_data: Num cap clks = 4
parse_throttle_dt_data: clk=mcpu type=1
parse_throttle_dt_data: clk=bcpu type=2
parse_throttle_dt_data: clk=gpu type=4
parse_throttle_dt_data: clk=emc type=3
tegra_throttle_probe: probe successful. #cdevs=4
FAN dev name: pwm-fan
FAN:gpio request success.
FAN: can't find tach_gpio
pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet
pwm_fan_driver pwm-fan: cap state:4, cap pwm:255
pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal
pwm_fan_driver pwm-fan: tach period: 1000
pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2
pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2
pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2
pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
CPU EMC frequency mapping table: from device tree
cpufreq: platform driver Initialization: pass
cpuidle: Initializing cpuidle driver init for Denver cluster
cpuidle: Initializing cpuidle driver init for A57 cluster
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-tegra 3460000.sdhci: Client registration for eMC Successful
CMDQ: cmdq_platfm_init successful
CQE: CMD_TIMING bit set for R1B DCMD
tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete
tegra-se-nvhost 15810000.se: initialized
tegra-se-nvhost 15810000.se: tegra_se_probe: complete
tegra-se-nvhost 15820000.se: initialized
tegra-se-nvhost 15820000.se: tegra_se_probe: complete
tegra-se-nvhost 15830000.se: initialized
tegra-se-nvhost 15830000.se: tegra_se_probe: complete
tegra-se-nvhost 15840000.se: initialized
tegra-se-nvhost 15840000.se: tegra_se_probe: complete
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000
tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192
tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900
tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x1900-0x3980 TX[64x128]=0x3980-0x5a00
tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x5a00-0x5ac0 TX[1x64]=0x5ac0-0x5b80
tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x5b80-0x7000 TX[16x320]=0x7000-0x8480
tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8480-0x8900 TX[16x64]=0x8900-0x8d80
tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x8d80-0x8f80 TX[1x384]=0x8f80-0x9180
tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9180-0xb200 TX[1x8192]=0xb200-0xd280
tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (47)
tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful
tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96
tegra_aon c1a0000.aon: tegra aon driver probe OK
tegra186-aondbg aondbg: aondbg driver probe() OK
register_ari_mca_banks: Registered MCA ROC:IOB
register_ari_mca_banks: Registered MCA ROC:CCE
tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2390000.axi2apb: enabled timeout = 9894000
tegra18-bridge 2390000.axi2apb: bridge probed OK
tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 23a0000.axi2apb: enabled timeout = 9894000
tegra18-bridge 23a0000.axi2apb: bridge probed OK
tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 23b0000.axi2apb: enabled timeout = 9894000
tegra18-bridge 23b0000.axi2apb: bridge probed OK
tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 23c0000.axi2apb: enabled timeout = 9894000
tegra18-bridge 23c0000.axi2apb: bridge probed OK
tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 23d0000.axi2apb: enabled timeout = 9894000
tegra18-bridge 23d0000.axi2apb: bridge probed OK
tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2100000.axip2p: enabled timeout = 9894000
tegra18-bridge 2100000.axip2p: bridge probed OK
tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2110000.axip2p: enabled timeout = 9894000
tegra18-bridge 2110000.axip2p: bridge probed OK
tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2120000.axip2p: enabled timeout = 9894000
tegra18-bridge 2120000.axip2p: bridge probed OK
tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2130000.axip2p: enabled timeout = 9894000
tegra18-bridge 2130000.axip2p: bridge probed OK
tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2140000.axip2p: enabled timeout = 9894000
tegra18-bridge 2140000.axip2p: bridge probed OK
tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2150000.axip2p: enabled timeout = 9894000
tegra18-bridge 2150000.axip2p: bridge probed OK
tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2160000.axip2p: enabled timeout = 9894000
tegra18-bridge 2160000.axip2p: bridge probed OK
tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2170000.axip2p: enabled timeout = 9894000
tegra18-bridge 2170000.axip2p: bridge probed OK
tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2180000.axip2p: enabled timeout = 9894000
tegra18-bridge 2180000.axip2p: bridge probed OK
tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2190000.axip2p: enabled timeout = 9894000
tegra18-bridge 2190000.axip2p: bridge probed OK
**** A57 ECC: Enabled
tegra18_a57_serr_init: on CPU 3 a A57 Core
tegra18x_actmon d230000.actmon: in actmon_register()...
tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all
hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available
denver_knobs_init:MTS_VERSION:47926945
nvpmodel: initialized successfully
trusty-virtio trusty:virtio: initializing
trusty_ipc virtio0: vring0: va(pa) ffffffc0e9c72000(0) qsz 32 notifyid 1
trusty_ipc virtio0: vring1: va(pa) ffffffc0e9c9c000(0) qsz 32 notifyid 2
trusty-virtio trusty:virtio: initializing done
trusty_ipc virtio0: is online
usbcore: registered new interface driver snd-usb-audio
mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr
input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0
input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1
mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1
mmc0: periodic cache flush enabled
mmc0: new HS400 Enhanced strobe MMC card at address 0001
mmcblk0: mmc0:0001 DG4016 14.7 GiB
mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB
mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33
OPE platform probe
OPE platform probe successful
usb 1-2: new high-speed USB device number 2 using tegra-xusb
usb 1-2: New USB device found, idVendor=0451, idProduct=8027
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-2: SerialNumber: 900408617489
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 2 ports detected
tegra-asoc: sound: ADMAIF1 ADMAIF1 mapping ok
tegra-asoc: sound: ADMAIF2 ADMAIF2 mapping ok
tegra-asoc: sound: ADMAIF3 ADMAIF3 mapping ok
tegra-asoc: sound: ADMAIF4 ADMAIF4 mapping ok
tegra-asoc: sound: ADMAIF5 ADMAIF5 mapping ok
tegra-asoc: sound: ADMAIF6 ADMAIF6 mapping ok
tegra-asoc: sound: ADMAIF7 ADMAIF7 mapping ok
tegra-asoc: sound: ADMAIF8 ADMAIF8 mapping ok
tegra-asoc: sound: ADMAIF9 ADMAIF9 mapping ok
tegra-asoc: sound: ADMAIF10 ADMAIF10 mapping ok
tegra-asoc: sound: ADMAIF11 ADMAIF11 mapping ok
tegra-asoc: sound: ADMAIF12 ADMAIF12 mapping ok
tegra-asoc: sound: ADMAIF13 ADMAIF13 mapping ok
tegra-asoc: sound: ADMAIF14 ADMAIF14 mapping ok
tegra-asoc: sound: ADMAIF15 ADMAIF15 mapping ok
tegra-asoc: sound: ADMAIF16 ADMAIF16 mapping ok
tegra-asoc: sound: ADMAIF17 ADMAIF17 mapping ok
tegra-asoc: sound: ADMAIF18 ADMAIF18 mapping ok
tegra-asoc: sound: ADMAIF19 ADMAIF19 mapping ok
tegra-asoc: sound: ADMAIF20 ADMAIF20 mapping ok
tegra-pcie 10003000.pcie-controller: link 2 down, retrying
u32 classifier
Actions configured
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: netlink gateway (rev 20130117) max_hops=1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
9pnet: Installing 9P2000 support
Key type dns_resolver registered
Registered cp15_barrier emulation handler
Registered setend emulation handler
registered taskstats version 1
isp 15600000.isp: initialized
nvcsi 150c0000.nvcsi: initialized
tegra-vi4 15700000.vi: using default number of vi channels,15
Wake83 for irq=51
gpio tegra-gpio-aon wake29 for gpio=56(FF:0)
input: gpio-keys as /devices/gpio-keys/input/input2
tegra-vi4 15700000.vi: initialized
tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--2 bound
tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound
tegra_rtc c2a0000.rtc: setting system clock to 2021-08-09 02:49:29 UTC (1628477369)
mmcblk mmc0:0001: Card claimed for testing.
usb 2-2: new SuperSpeed USB device number 2 using tegra-xusb
bpmp: mounted debugfs mirror
bwmgr: missing cdev-type property
ALSA device list:
#0: tegra-hda at 0x3518000 irq 380
#1: tegra-snd-t186ref-mobile-rt565x
Freeing unused kernel memory: 8640K
usb 1-2: usb_suspend_both: status 0
usb 2-2: New USB device found, idVendor=0451, idProduct=8025
usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 2 ports detected
Root device found: nvme0n1p1
usb 1-3: new full-speed USB device number 3 using tegra-xusb
usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
tegra-pcie 10003000.pcie-controller: link 2 down, retrying
tegra-pcie 10003000.pcie-controller: link 2 down, ignoring
usb 2-2.1: new SuperSpeed USB device number 3 using tegra-xusb
tegra-pcie 10003000.pcie-controller: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x40100000-0x47ffffff]
pci_bus 0000:00: root bus resource [mem 0x48000000-0x7fffffff pref]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:01.0: [10de:10e5] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
iommu: Adding device 0000:00:01.0 to group 53
arm-smmu: forcing sodev map for 0000:00:01.0
pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:01:00.0: [1b21:2812] type 01 class 0x060400
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:01:00.0 to group 54
arm-smmu: forcing sodev map for 0000:01:00.0
pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:00.0: [1b21:2812] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:02:00.0 to group 55
arm-smmu: forcing sodev map for 0000:02:00.0
pci 0000:02:02.0: [1b21:2812] type 01 class 0x060400
pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:02:02.0 to group 56
arm-smmu: forcing sodev map for 0000:02:02.0
pci 0000:02:03.0: [1b21:2812] type 01 class 0x060400
pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:02:03.0 to group 57
arm-smmu: forcing sodev map for 0000:02:03.0
pci 0000:02:08.0: [1b21:2812] type 01 class 0x060400
pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:02:08.0 to group 58
arm-smmu: forcing sodev map for 0000:02:08.0
pci 0000:02:0a.0: [1b21:2812] type 01 class 0x060400
pci 0000:02:0a.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:02:0a.0 to group 59
arm-smmu: forcing sodev map for 0000:02:0a.0
pci 0000:02:0b.0: [1b21:2812] type 01 class 0x060400
pci 0000:02:0b.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:02:0b.0 to group 60
arm-smmu: forcing sodev map for 0000:02:0b.0
pci 0000:02:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:08.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:0a.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:0b.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:03:00.0: [8086:24fd] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:03:00.0 to group 61
arm-smmu: forcing sodev map for 0000:03:00.0
pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
pci 0000:04:00.0: [8086:1533] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0x00000000-0x0007ffff]
pci 0000:04:00.0: reg 0x18: [io 0x0000-0x001f]
pci 0000:04:00.0: reg 0x1c: [mem 0x00000000-0x00003fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:04:00.0 to group 62
arm-smmu: forcing sodev map for 0000:04:00.0
pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
pci 0000:05:00.0: [8086:1533] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x0007ffff]
pci 0000:05:00.0: reg 0x18: [io 0x0000-0x001f]
pci 0000:05:00.0: reg 0x1c: [mem 0x00000000-0x00003fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:05:00.0 to group 63
arm-smmu: forcing sodev map for 0000:05:00.0
pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05
pci 0000:06:00.0: [1bc0:1002] type 00 class 0x010802
pci 0000:06:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
pci 0000:06:00.0: PME# supported from D0 D3hot
iommu: Adding device 0000:06:00.0 to group 64
arm-smmu: forcing sodev map for 0000:06:00.0
pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
pci_bus 0000:08: busn_res: [bus 08-ff] end is updated to 08
pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 08
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 08
pci 0000:00:01.0: BAR 14: assigned [mem 0x40100000-0x404fffff]
pci 0000:00:01.0: BAR 13: assigned [io 0x1000-0x2fff]
pci 0000:01:00.0: BAR 14: assigned [mem 0x40100000-0x404fffff]
pci 0000:01:00.0: BAR 13: assigned [io 0x1000-0x2fff]
pci 0000:02:00.0: BAR 14: assigned [mem 0x40100000-0x401fffff]
pci 0000:02:02.0: BAR 14: assigned [mem 0x40200000-0x402fffff]
pci 0000:02:03.0: BAR 14: assigned [mem 0x40300000-0x403fffff]
pci 0000:02:08.0: BAR 14: assigned [mem 0x40400000-0x404fffff]
pci 0000:02:02.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:02:03.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:03:00.0: BAR 0: assigned [mem 0x40100000-0x40101fff 64bit]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [mem 0x40100000-0x401fffff]
pci 0000:04:00.0: BAR 0: assigned [mem 0x40200000-0x4027ffff]
pci 0000:04:00.0: BAR 3: assigned [mem 0x40280000-0x40283fff]
pci 0000:04:00.0: BAR 2: assigned [io 0x1000-0x101f]
pci 0000:02:02.0: PCI bridge to [bus 04]
pci 0000:02:02.0: bridge window [io 0x1000-0x1fff]
pci 0000:02:02.0: bridge window [mem 0x40200000-0x402fffff]
pci 0000:05:00.0: BAR 0: assigned [mem 0x40300000-0x4037ffff]
pci 0000:05:00.0: BAR 3: assigned [mem 0x40380000-0x40383fff]
pci 0000:05:00.0: BAR 2: assigned [io 0x2000-0x201f]
pci 0000:02:03.0: PCI bridge to [bus 05]
pci 0000:02:03.0: bridge window [io 0x2000-0x2fff]
pci 0000:02:03.0: bridge window [mem 0x40300000-0x403fffff]
pci 0000:06:00.0: BAR 0: assigned [mem 0x40400000-0x40403fff 64bit]
pci 0000:02:08.0: PCI bridge to [bus 06]
pci 0000:02:08.0: bridge window [mem 0x40400000-0x404fffff]
pci 0000:02:0a.0: PCI bridge to [bus 07]
pci 0000:02:0b.0: PCI bridge to [bus 08]
pci 0000:01:00.0: PCI bridge to [bus 02-08]
pci 0000:01:00.0: bridge window [io 0x1000-0x2fff]
pci 0000:01:00.0: bridge window [mem 0x40100000-0x404fffff]
pci 0000:00:01.0: PCI bridge to [bus 01-08]
pci 0000:00:01.0: bridge window [io 0x1000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0x40100000-0x404fffff]
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:02.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:03.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:08.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:0a.0: Signaling PME through PCIe PME interrupt
pci 0000:02:0b.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
aer 0000:00:01.0:pcie002: service driver aer loaded
igb 0000:04:00.0: enabling device (0000 -> 0002)
usb 2-2.1: New USB device found, idVendor=2109, idProduct=0813
usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2.1: Product: USB3.0 Hub
usb 2-2.1: Manufacturer: VIA Labs, Inc.
hub 2-2.1:1.0: USB hub found
hub 2-2.1:1.0: 4 ports detected
pps_core: source ptp0 got cdev (248:0)
pps pps0: new PPS source ptp0
igb 0000:04:00.0: added PHC on eth1
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 70:b3:d5:17:14:96
igb 0000:04:00.0: eth1: PBA No: 000300-000
igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:05:00.0: enabling device (0000 -> 0002)
pps_core: source ptp1 got cdev (248:1)
pps pps1: new PPS source ptp1
igb 0000:05:00.0: added PHC on eth2
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 70:b3:d5:17:14:97
igb 0000:05:00.0: eth2: PBA No: 000300-000
igb 0000:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
nvme nvme0: pci function 0000:06:00.0
nvme 0000:06:00.0: enabling device (0000 -> 0002)
Primary GPT is invalid, using alternate GPT.
nvme0n1: p1 p2
usb 2-2.1: usb_suspend_both: status 0
usb 1-2: reset high-speed USB device number 2 using tegra-xusb
usb 2-2: usb_suspend_both: status 0
usb usb2: usb_suspend_both: status 0
Found dev node: /dev/nvme0n1p1
random: crng init done
usb 1-2.1: new high-speed USB device number 4 using tegra-xusb
usb 1-2.1: New USB device found, idVendor=2109, idProduct=2813
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.1: Product: USB2.0 Hub
usb 1-2.1: Manufacturer: VIA Labs, Inc.
hub 1-2.1:1.0: USB hub found
hub 1-2.1:1.0: 4 ports detected
usb 1-2.1.4: new full-speed USB device number 5 using tegra-xusb
usb 1-2.1.4: New USB device found, idVendor=046d, idProduct=c534
usb 1-2.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.1.4: Product: USB Receiver
usb 1-2.1.4: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/3530000.xhci/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.0/0003:046D:C534.0001/input/input3
hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3530000.xhci-2.1.4/input0
input: Logitech USB Receiver as /devices/3530000.xhci/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.1/0003:046D:C534.0002/input/input4
hid-generic 0003:046D:C534.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3530000.xhci-2.1.4/input1
EXT4-fs (nvme0n1p1): recovery complete
EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
Rootfs mounted over nvme0n1p1
Switching from initrd to actual rootfs
ip_tables: (C) 2000-2006 Netfilter Core Team
cgroup: cgroup2: unknown option "nsdelegate"
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured.
systemd[1]: Set hostname to .
systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
systemd[1]: Configuration file /etc/systemd/system/serial-getty@ttyS0.service.d/autologin.conf is marked executable. Please remove executable permission bits. Proceeding anyway.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Swap.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
EXT4-fs (nvme0n1p1): re-mounted. Opts: (null)
bcpu-throttle-alert cooling device registered.
mcpu-throttle-alert cooling device registered.
gpu-throttle-alert cooling device registered.
systemd-journald[2332]: Received request to flush runtime journal from PID 1
using random self ethernet address
using random host ethernet address
spidev: module is already loaded
spidev: module is already loaded
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:03:00.0: enabling device (0000 -> 0002)
Mass Storage Function, version: 2009/09/11
LUN: removable file: (no medium)
using random self ethernet address
using random host ethernet address
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2
iwlwifi 0000:03:00.0: Falling back to user helper
rndis0: HOST MAC 22:4e:15:e4:fe:f8
rndis0: MAC 22:4e:15:e4:fe:f9
usb0: HOST MAC 22:4e:15:e4:fe:fa
usb0: MAC 22:4e:15:e4:fe:fb
tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled
l4tbr0: port 1(rndis0) entered blocking state
l4tbr0: port 1(rndis0) entered disabled state
device rndis0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
l4tbr0: port 2(usb0) entered blocking state
l4tbr0: port 2(usb0) entered disabled state
device usb0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
usbcore: registered new interface driver btusb
Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
Bluetooth: hci0: Device revision is 16
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
gpio tegra-gpio-aon wake51 for gpio=47(AA:7)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
FAN rising trip_level:1 cur_temp:46900 trip_temps[2]:60000
zram: Added device: zram0
zram: Added device: zram1
zram: Added device: zram2
zram: Added device: zram3
zram: Added device: zram4
zram: Added device: zram5
zram0: detected capacity change from 0 to 334262272
Adding 326424k swap on /dev/zram0. Priority:5 extents:1 across:326424k SS
zram1: detected capacity change from 0 to 334262272
Adding 326424k swap on /dev/zram1. Priority:5 extents:1 across:326424k SS
zram2: detected capacity change from 0 to 334262272
Adding 326424k swap on /dev/zram2. Priority:5 extents:1 across:326424k SS
zram3: detected capacity change from 0 to 334262272
Adding 326424k swap on /dev/zram3. Priority:5 extents:1 across:326424k SS
zram4: detected capacity change from 0 to 334262272
Adding 326424k swap on /dev/zram4. Priority:5 extents:1 across:326424k SS
zram5: detected capacity change from 0 to 334262272
Adding 326424k swap on /dev/zram5. Priority:5 extents:1 across:326424k SS
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1564638 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 16571 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
tegradc 15200000.nvdisplay: unblank
tegradc 15210000.nvdisplay: blank - powerdown
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2
iwlwifi 0000:03:00.0: Falling back to user helper
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP socket layer initialized
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2
iwlwifi 0000:03:00.0: Falling back to user helper
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2
iwlwifi 0000:03:00.0: Falling back to user helper
iwlwifi 0000:03:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone6: failed to read out thermal zone (-5)
thermal thermal_zone6: Registering thermal zone thermal_zone6 for type iwlwifi
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fuse init (API version 7.26)
tegradc 15200000.nvdisplay: unblank
tegradc 15210000.nvdisplay: blank - powerdown
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
iwlwifi 0000:03:00.0: Getting the temperature timed out
vdd-3v3-cvb: disabling
vdd-3v3-cvb: disabling
vdd-1v8-cvb: disabling
vdd-fan: disabling
vdd_sys_en: disabling
spmic-ldo1: disabling
vddio-sdmmc1: disabling
avdd-ts-hv: disabling
vdd-sys-bl: disabling
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
FAN rising trip_level:2 cur_temp:60100 trip_temps[3]:68000
FAN cooling trip_level:1 cur_temp:51800 trip_temps[2]:60000
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
FAN rising trip_level:2 cur_temp:60100 trip_temps[3]:68000
FAN cooling trip_level:1 cur_temp:51900 trip_temps[2]:60000
FAN rising trip_level:2 cur_temp:60100 trip_temps[3]:68000
FAN cooling trip_level:1 cur_temp:51800 trip_temps[2]:60000
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
FAN rising trip_level:2 cur_temp:60100 trip_temps[3]:68000
FAN cooling trip_level:1 cur_temp:51200 trip_temps[2]:60000
FAN rising trip_level:2 cur_temp:60100 trip_temps[3]:68000
iwlwifi 0000:03:00.0: Getting the temperature timed out
FAN cooling trip_level:1 cur_temp:51200 trip_temps[2]:60000
FAN rising trip_level:2 cur_temp:60100 trip_temps[3]:68000
FAN cooling trip_level:1 cur_temp:51800 trip_temps[2]:60000
FAN rising trip_level:2 cur_temp:60400 trip_temps[3]:68000
FAN cooling trip_level:1 cur_temp:51500 trip_temps[2]:60000
FAN rising trip_level:2 cur_temp:60100 trip_temps[3]:68000
FAN cooling trip_level:1 cur_temp:51500 trip_temps[2]:60000
FAN rising trip_level:2 cur_temp:60100 trip_temps[3]:68000
iwlwifi 0000:03:00.0: Getting the temperature timed out
FAN cooling trip_level:1 cur_temp:51000 trip_temps[2]:60000
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
FAN rising trip_level:2 cur_temp:60000 trip_temps[3]:68000
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
FAN rising trip_level:3 cur_temp:68100 trip_temps[4]:76000
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
FAN rising trip_level:4 cur_temp:76300 trip_temps[5]:140000
iwlwifi 0000:03:00.0: Getting the temperature timed out
FAN cooling trip_level:3 cur_temp:68700 trip_temps[4]:76000
FAN cooling trip_level:2 cur_temp:60700 trip_temps[3]:68000
iwlwifi 0000:03:00.0: Getting the temperature timed out
FAN cooling trip_level:1 cur_temp:51900 trip_temps[2]:60000
iwlwifi 0000:03:00.0: Getting the temperature timed out
FAN rising trip_level:2 cur_temp:60000 trip_temps[3]:68000
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
FAN rising trip_level:3 cur_temp:68100 trip_temps[4]:76000
iwlwifi 0000:03:00.0: Getting the temperature timed out
FAN cooling trip_level:2 cur_temp:60700 trip_temps[3]:68000
FAN cooling trip_level:1 cur_temp:51900 trip_temps[2]:60000
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
FAN rising trip_level:2 cur_temp:60200 trip_temps[3]:68000
iwlwifi 0000:03:00.0: Getting the temperature timed out
FAN cooling trip_level:1 cur_temp:51700 trip_temps[2]:60000