dmesg - readwhilewrite

Return To readwhilewrite System Information

microcode: microcode updated early to revision 0x42e, date = 2019-03-14
Linux version 4.18.0-305.3.1.el8.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 8.4.1 20200928 (Red Hat 8.4.1-1) (GCC)) #1 SMP Tue Jun 1 16:14:33 UTC 2021
Command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-4.18.0-305.3.1.el8.x86_64 root=/dev/mapper/cl-root ro crashkernel=auto resume=/dev/mapper/cl-swap rd.lvm.lv=cl/root rd.lvm.lv=cl/swap rhgb quiet
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000cd2effff] usable
BIOS-e820: [mem 0x00000000cd2f0000-0x00000000cd31bfff] reserved
BIOS-e820: [mem 0x00000000cd31c000-0x00000000cd35afff] ACPI data
BIOS-e820: [mem 0x00000000cd35b000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI:  /08VT7V, BIOS 2.1.3 05/21/2014
tsc: Fast TSC calibration using PIT
tsc: Detected 2399.874 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x430000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-CFFFF write-back
  D0000-EBFFF uncachable
  EC000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask 3FFF80000000 write-back
  1 base 000080000000 mask 3FFFC0000000 write-back
  2 base 0000C0000000 mask 3FFFF0000000 write-back
  3 base 000100000000 mask 3FFF00000000 write-back
  4 base 000200000000 mask 3FFE00000000 write-back
  5 base 000400000000 mask 3FFFE0000000 write-back
  6 base 000420000000 mask 3FFFF0000000 write-back
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
last_pfn = 0xcd2f0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe710-0x000fe71f]
kexec: Reserving the low 1M of memory for crashkernel
Using GB pages for direct mapping
BRK [0x2bd601000, 0x2bd601fff] PGTABLE
BRK [0x2bd602000, 0x2bd602fff] PGTABLE
BRK [0x2bd603000, 0x2bd603fff] PGTABLE
BRK [0x2bd604000, 0x2bd604fff] PGTABLE
BRK [0x2bd605000, 0x2bd605fff] PGTABLE
BRK [0x2bd606000, 0x2bd606fff] PGTABLE
BRK [0x2bd607000, 0x2bd607fff] PGTABLE
RAMDISK: [mem 0x34868000-0x3642bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F1100 000024 (v02 DELLOE)
ACPI: XSDT 0x00000000000F1248 0000A4 (v01 DELLOE DELLOSE  00000001 DELL 00000001)
ACPI: FACP 0x00000000CD33534C 0000F4 (v03 DELLOE DELLOSE  00000001 DELL 00000001)
ACPI: DSDT 0x00000000CD31C000 0072F1 (v01 DELLOE DELLOSE  00000001 INTL 20110211)
ACPI: FACS 0x00000000CD337000 000040
ACPI: FACS 0x00000000CD337000 000040
ACPI: APIC 0x00000000CD334478 0001DE (v01 DELLOE DELLOSE  00000001 DELL 00000001)
ACPI: SPCR 0x00000000CD334664 000050 (v01 DELLOE DELLOSE  00000001 DELL 00000001)
ACPI: HPET 0x00000000CD3346B8 000038 (v01 DELLOE DELLOSE  00000001 DELL 00000001)
ACPI: DMAR 0x00000000CD3346F4 0000D8 (v01 DELLOE DELLOSE  00000001 DELL 00000001)
ACPI: MCFG 0x00000000CD334A10 00003C (v01 DELLOE DELLOSE  00000001 DELL 00000001)
ACPI: WD__ 0x00000000CD334A50 000134 (v01 DELLOE DELLOSE  00000001 DELL 00000001)
ACPI: SLIC 0x00000000CD334B88 000024 (v01 DELLOE DELLOSE  00000001 DELL 00000001)
ACPI: ERST 0x00000000CD3234B4 000270 (v01 DELLOE DELLOSE  00000001 DELL 00000001)
ACPI: HEST 0x00000000CD323724 000578 (v01 DELLOE DELLOSE  00000001 DELL 00000001)
ACPI: BERT 0x00000000CD3232F4 000030 (v01 DELLOE DELLOSE  00000001 DELL 00000001)
ACPI: EINJ 0x00000000CD323324 000190 (v01 DELLOE DELLOSE  00000001 DELL 00000001)
ACPI: TCPA 0x00000000CD3352E4 000064 (v02 DELLOE DELLOSE  00000001 DELL 00000001)
ACPI: PC__ 0x00000000CD335274 00006E (v01 DELLOE DELLOSE  00000001 DELL 00000001)
ACPI: SRAT 0x00000000CD334DB0 0004C0 (v01 DELLOE DELLOSE  00000001 DELL 00000001)
ACPI: SSDT 0x00000000CD338000 0011E8 (v01 INTEL  PPM RCM  80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 1 -> APIC 0x00 -> Node 0
SRAT: PXM 1 -> APIC 0x02 -> Node 0
SRAT: PXM 1 -> APIC 0x04 -> Node 0
SRAT: PXM 1 -> APIC 0x06 -> Node 0
ACPI: SRAT: Node 0 PXM 1 [mem 0x00000000-0x42fffffff]
NODE_DATA(0) allocated [mem 0x42ffd6000-0x42fffffff]
Using crashkernel=auto, the size chosen is a best effort estimation.
Reserving 192MB of memory at 3088MB for crashkernel (System RAM: 16338MB)
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000042fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x00000000cd2effff]
  node   0: [mem 0x0000000100000000-0x000000042fffffff]
Zeroed struct page in unavailable ranges: 11635 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000042fffffff]
On node 0 totalpages: 4182669
  DMA zone: 64 pages used for memmap
  DMA zone: 157 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 13068 pages used for memmap
  DMA32 zone: 836336 pages, LIFO batch:63
  Normal zone: 52224 pages used for memmap
  Normal zone: 3342336 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 1, version 32, address 0xfec3f000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
ACPI: SPCR: SPCR table version 1
ACPI: SPCR: Unexpected SPCR Access Width.  Defaulting to byte size
ACPI: SPCR: console: uart,mmio,0x0
smpboot: Allowing 48 CPUs, 44 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
PM: Registered nosave memory: [mem 0xcd2f0000-0xcd31bfff]
PM: Registered nosave memory: [mem 0xcd31c000-0xcd35afff]
PM: Registered nosave memory: [mem 0xcd35b000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xffffffff]
[mem 0xd0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:48 nr_cpu_ids:48 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
pcpu-alloc: [0] 32 33 34 35 36 37 38 39 [0] 40 41 42 43 44 45 46 47 
Built 1 zonelists, mobility grouping on.  Total pages: 4117156
Policy zone: Normal
Kernel command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-4.18.0-305.3.1.el8.x86_64 root=/dev/mapper/cl-root ro crashkernel=auto resume=/dev/mapper/cl-swap rd.lvm.lv=cl/root rd.lvm.lv=cl/swap rhgb quiet
Specific versions of hardware are certified with Red Hat Enterprise Linux 8. Please see the list of hardware certified with Red Hat Enterprise Linux 8 at .
Memory: 3201200K/16730676K available (12293K kernel code, 2225K rwdata, 7708K rodata, 2480K init, 14048K bss, 609472K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=48, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 38570 entries in 151 pages
ftrace: allocated 151 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=48.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=48
NR_IRQS: 524544, nr_irqs: 1352, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour VGA+ 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200925
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000df100000 flags: 0x1
DMAR: dmar0: reg_base_addr df100000 ver 1:0 cap d2078c106f0466 ecap f020de
DMAR: RMRR base: 0x000000cf458000 end: 0x000000cf46ffff
DMAR: RMRR base: 0x000000cf450000 end: 0x000000cf450fff
DMAR: RMRR base: 0x000000cf452000 end: 0x000000cf452fff
DMAR: ATSR flags: 0x0
DMAR-IR: IOAPIC id 0 under DRHD base  0xdf100000 IOMMU 0
DMAR-IR: IOAPIC id 1 under DRHD base  0xdf100000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xdf100000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2297c0436cb, max_idle_ns: 440795219997 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.74 BogoMIPS (lpj=2399874)
pid_max: default: 49152 minimum: 384
Security Framework initialized
Yama: becoming mindful.
SELinux:  Initializing.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4
FEATURE SPEC_CTRL Present
FEATURE IBPB_SUPPORT Present
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 32K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2407 v2 @ 2.40GHz (family: 0x6, model: 0x3e, stepping: 0x4)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      8
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             00000007000000ff
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1  #2  #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 12
smpboot: Total of 4 processors activated (19198.99 BogoMIPS)
node 0 deferred pages initialised in 27ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 16384 (order: 8, 1048576 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1623782658.054:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0x1fff window]
pci_bus 0000:00: root bus resource [io  0x2000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400
pci 0000:00:03.0: enabling Extended Tags
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000
pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf0fb000-0xdf0fb00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xdf0fc000-0xdf0fc00f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdf0fd000-0xdf0fd3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdf0fe000-0xdf0fe3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d04] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io  0xece8-0xecef]
pci 0000:00:1f.2: reg 0x14: [io  0xecf8-0xecfb]
pci 0000:00:1f.2: reg 0x18: [io  0xecf0-0xecf7]
pci 0000:00:1f.2: reg 0x1c: [io  0xecfc-0xecff]
pci 0000:00:1f.2: reg 0x20: [io  0xecc0-0xecdf]
pci 0000:00:1f.2: reg 0x24: [mem 0xdf0ff000-0xdf0ff7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:01:00.0: [1000:0073] type 00 class 0x010400
pci 0000:01:00.0: reg 0x10: [io  0xfc00-0xfcff]
pci 0000:01:00.0: reg 0x14: [mem 0xdcffc000-0xdcffffff 64bit]
pci 0000:01:00.0: reg 0x1c: [mem 0xdcf80000-0xdcfbffff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xdc000000-0xdc01ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xf000-0xffff]
pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xdcffffff]
pci 0000:00:03.0: PCI bridge to [bus 08]
pci 0000:00:11.0: PCI bridge to [bus 09]
pci 0000:00:1c.0: PCI bridge to [bus 0a]
pci 0000:02:00.0: [14e4:165f] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xd90a0000-0xd90affff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xd90b0000-0xd90bffff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xd90c0000-0xd90cffff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0xdd000000-0xdd03ffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:1c.4 (capable of 8.000 Gb/s with 5.0 GT/s PCIe x2 link)
pci 0000:02:00.1: [14e4:165f] type 00 class 0x020000
pci 0000:02:00.1: reg 0x10: [mem 0xd90d0000-0xd90dffff 64bit pref]
pci 0000:02:00.1: reg 0x18: [mem 0xd90e0000-0xd90effff 64bit pref]
pci 0000:02:00.1: reg 0x20: [mem 0xd90f0000-0xd90fffff 64bit pref]
pci 0000:02:00.1: reg 0x30: [mem 0xdd000000-0xdd03ffff pref]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4:   bridge window [mem 0xdd000000-0xdd7fffff]
pci 0000:00:1c.4:   bridge window [mem 0xd9000000-0xd90fffff 64bit pref]
pci 0000:03:00.0: [1912:0013] type 01 class 0x060400
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 03-07]
pci 0000:00:1c.7:   bridge window [mem 0xdd800000-0xdeffffff]
pci 0000:00:1c.7:   bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:04:00.0: [1912:0013] type 01 class 0x060400
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:01.0: [1912:0013] type 01 class 0x060400
pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04-07]
pci 0000:03:00.0:   bridge window [mem 0xdd800000-0xdeffffff]
pci 0000:03:00.0:   bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:05:00.0: [1912:0012] type 01 class 0x060400
pci 0000:04:00.0: PCI bridge to [bus 05-06]
pci 0000:04:00.0:   bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:04:00.0:   bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:06: extended config space not accessible
pci 0000:06:00.0: [102b:0534] type 00 class 0x030000
pci 0000:06:00.0: reg 0x10: [mem 0xd8000000-0xd8ffffff pref]
pci 0000:06:00.0: reg 0x14: [mem 0xde7fc000-0xde7fffff]
pci 0000:06:00.0: reg 0x18: [mem 0xdd800000-0xddffffff]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0:   bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:05:00.0:   bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:04:01.0: PCI bridge to [bus 07]
pci 0000:04:01.0:   bridge window [mem 0xdef00000-0xdeffffff]
pci_bus 0000:0b: extended config space not accessible
pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0x1fff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x2000-0xffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xfbffffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [P0B1] (domain 0000 [bus 3f])
acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:02: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A08:02: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [bus 3f]
pci 0000:3f:08.0: [8086:0e80] type 00 class 0x088000
pci 0000:3f:09.0: [8086:0e90] type 00 class 0x088000
pci 0000:3f:0a.0: [8086:0ec0] type 00 class 0x088000
pci 0000:3f:0a.1: [8086:0ec1] type 00 class 0x088000
pci 0000:3f:0a.2: [8086:0ec2] type 00 class 0x088000
pci 0000:3f:0a.3: [8086:0ec3] type 00 class 0x088000
pci 0000:3f:0b.0: [8086:0e1e] type 00 class 0x088000
pci 0000:3f:0b.3: [8086:0e1f] type 00 class 0x088000
pci 0000:3f:0c.0: [8086:0ee0] type 00 class 0x088000
pci 0000:3f:0c.1: [8086:0ee2] type 00 class 0x088000
pci 0000:3f:0d.0: [8086:0ee1] type 00 class 0x088000
pci 0000:3f:0d.1: [8086:0ee3] type 00 class 0x088000
pci 0000:3f:0e.0: [8086:0ea0] type 00 class 0x088000
pci 0000:3f:0e.1: [8086:0e30] type 00 class 0x110100
pci 0000:3f:0f.0: [8086:0ea8] type 00 class 0x088000
pci 0000:3f:0f.1: [8086:0e71] type 00 class 0x088000
pci 0000:3f:0f.2: [8086:0eaa] type 00 class 0x088000
pci 0000:3f:0f.3: [8086:0eab] type 00 class 0x088000
pci 0000:3f:0f.4: [8086:0eac] type 00 class 0x088000
pci 0000:3f:0f.5: [8086:0ead] type 00 class 0x088000
pci 0000:3f:10.0: [8086:0eb0] type 00 class 0x088000
pci 0000:3f:10.1: [8086:0eb1] type 00 class 0x088000
pci 0000:3f:10.2: [8086:0eb2] type 00 class 0x088000
pci 0000:3f:10.3: [8086:0eb3] type 00 class 0x088000
pci 0000:3f:10.4: [8086:0eb4] type 00 class 0x088000
pci 0000:3f:10.5: [8086:0eb5] type 00 class 0x088000
pci 0000:3f:10.7: [8086:0eb7] type 00 class 0x088000
pci 0000:3f:13.0: [8086:0e1d] type 00 class 0x088000
pci 0000:3f:13.1: [8086:0e34] type 00 class 0x110100
pci 0000:3f:13.4: [8086:0e81] type 00 class 0x088000
pci 0000:3f:13.5: [8086:0e36] type 00 class 0x110100
pci 0000:3f:16.0: [8086:0ec8] type 00 class 0x088000
pci 0000:3f:16.1: [8086:0ec9] type 00 class 0x088000
pci 0000:3f:16.2: [8086:0eca] type 00 class 0x088000
pci_bus 0000:3f: on NUMA node 0
ACPI: PCI Root Bridge [P1B1] (domain 0000 [bus 7f])
acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:03: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A08:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: root bus resource [bus 7f]
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 *6 7 11 14 15)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 11 *14 15)
iommu: Default domain type: Passthrough 
pci 0000:06:00.0: vgaarb: setting as boot VGA device
pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:06:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0xcd2f0000-0xcfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [io  0x0800-0x087f] has been reserved
system 00:04: [io  0x0880-0x08ff] has been reserved
system 00:04: [io  0x0900-0x091f] has been reserved
system 00:04: [io  0x0920-0x0923] has been reserved
system 00:04: [io  0x0924] has been reserved
system 00:04: [io  0x0370-0x0377] has been reserved
system 00:04: [io  0x0ca0-0x0ca7] has been reserved
system 00:04: [io  0x0ca9-0x0cab] has been reserved
system 00:04: [io  0x0cad-0x0caf] has been reserved
system 00:04: [io  0x0cb0-0x0cbf] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:05: [io  0x0ca8] has been reserved
system 00:05: [io  0x0cac] has been reserved
system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
system 00:06: [mem 0xe0000000-0xe3efffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xe3f00000-0xe3ffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xdf100000-0xdf101fff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:02:00.1: can't claim BAR 6 [mem 0xdd000000-0xdd03ffff pref]: address conflict with 0000:02:00.0 [mem 0xdd000000-0xdd03ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xf000-0xffff]
pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xdcffffff]
pci 0000:00:03.0: PCI bridge to [bus 08]
pci 0000:00:11.0: PCI bridge to [bus 09]
pci 0000:00:1c.0: PCI bridge to [bus 0a]
pci 0000:02:00.1: BAR 6: assigned [mem 0xdd040000-0xdd07ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4:   bridge window [mem 0xdd000000-0xdd7fffff]
pci 0000:00:1c.4:   bridge window [mem 0xd9000000-0xd90fffff 64bit pref]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0:   bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:05:00.0:   bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05-06]
pci 0000:04:00.0:   bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:04:00.0:   bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:04:01.0: PCI bridge to [bus 07]
pci 0000:04:01.0:   bridge window [mem 0xdef00000-0xdeffffff]
pci 0000:03:00.0: PCI bridge to [bus 04-07]
pci 0000:03:00.0:   bridge window [mem 0xdd800000-0xdeffffff]
pci 0000:03:00.0:   bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 03-07]
pci 0000:00:1c.7:   bridge window [mem 0xdd800000-0xdeffffff]
pci 0000:00:1c.7:   bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0b]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0x1fff window]
pci_bus 0000:00: resource 8 [io  0x2000-0xffff window]
pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 10 [mem 0xd0000000-0xfbffffff window]
pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdcffffff]
pci_bus 0000:02: resource 1 [mem 0xdd000000-0xdd7fffff]
pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd90fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xdd800000-0xdeffffff]
pci_bus 0000:03: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xdd800000-0xdeffffff]
pci_bus 0000:04: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xdd800000-0xde7fffff]
pci_bus 0000:05: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xdd800000-0xde7fffff]
pci_bus 0000:06: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xdef00000-0xdeffffff]
pci_bus 0000:0b: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:0b: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:0b: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:0b: resource 7 [io  0x0d00-0x1fff window]
pci_bus 0000:0b: resource 8 [io  0x2000-0xffff window]
pci_bus 0000:0b: resource 9 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0b: resource 10 [mem 0xd0000000-0xfbffffff window]
pci_bus 0000:0b: resource 11 [mem 0xfed40000-0xfed44fff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
MPTCP token hash table entries: 16384 (order: 6, 393216 bytes)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6a0 took 13114 usecs
pci 0000:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
pci 0000:06:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 28432K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xbd000000-0xc1000000] (64MB)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
pstore: using deflate compression
Platform Keyring initialized
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:01.0: Signaling with IRQ 25
pcieport 0000:00:01.0: enabled with IRQ 25
pcieport 0000:00:03.0: Signaling with IRQ 26
pcieport 0000:00:03.0: enabled with IRQ 26
pcieport 0000:00:11.0: Signaling with IRQ 27
pcieport 0000:00:11.0: enabled with IRQ 27
pcieport 0000:00:1c.0: Signaling with IRQ 28
pcieport 0000:00:1c.0: enabled with IRQ 28
pcieport 0000:00:1c.4: Signaling with IRQ 29
pcieport 0000:00:1c.4: enabled with IRQ 29
pcieport 0000:00:1c.7: Signaling with IRQ 30
pcieport 0000:00:1c.7: enabled with IRQ 30
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.5.1 model 0x3E
intel_idle: Local APIC timer is reliable in all C-states
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xdf0fd000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.18.0-305.3.1.el8.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 22, io mem 0xdf0fe000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.18.0-305.3.1.el8.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
core: Using 21 MCE banks
microcode: sig=0x306e4, pf=0x8, revision=0x42e
microcode: Microcode Update Driver: v2.2.
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (852800620, 0)->(1104907393, -252106773)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS kernel signing key: e791af5efe51a0987c687fa8cdbff669c9c75f2d'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
zswap: loaded using pool lzo/zbud
page_owner is disabled
Key type big_key registered
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
rtc_cmos 00:01: setting system clock to 2021-06-15 18:44:19 UTC (1623782659)
Freeing unused decrypted memory: 2036K
Freeing unused kernel memory: 2480K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel memory: 2012K
Freeing unused kernel memory: 484K
ERST: NVRAM ERST Log Address Range not implemented yet.
systemd[1]: systemd 239 (239-45.el8) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Timers.
systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Listening on Journal Socket.
systemd[1]: Started Memstrack Anylazing Service.
fuse: init (API version 7.31)
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.5: new low-speed USB device number 3 using ehci-pci
usb 2-1.8: new full-speed USB device number 3 using ehci-pci
usb 1-1.5: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: USB Optical Mouse
usb 1-1.5: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:046D:C077.0001/input/input1
hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.5/input0
usb 2-1.8: New USB device found, idVendor=413c, idProduct=1005, bcdDevice=59.00
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8: Product: Dell Multimedia Pro Keyboard Hub
usb 2-1.8: Manufacturer: Dell
hub 2-1.8:1.0: USB hub found
hub 2-1.8:1.0: 3 ports detected
tsc: Refined TSC clocksource calibration: 2399.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298364cab5, max_idle_ns: 440795214892 ns
clocksource: Switched to clocksource tsc
usb 1-1.6: new high-speed USB device number 4 using ehci-pci
usb 1-1.6: New USB device found, idVendor=0624, idProduct=0248, bcdDevice= 0.00
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: Gadget USB HUB
usb 1-1.6: Manufacturer: no manufacturer
usb 1-1.6: SerialNumber: 0123456789
hub 1-1.6:1.0: USB hub found
hub 1-1.6:1.0: 6 ports detected
usb 2-1.8.1: new low-speed USB device number 4 using ehci-pci
usb 2-1.8.1: New USB device found, idVendor=413c, idProduct=2011, bcdDevice=59.00
usb 2-1.8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8.1: Product: Dell Multimedia Pro Keyboard
usb 2-1.8.1: Manufacturer: Dell
input: Dell Dell Multimedia Pro Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1:1.0/0003:413C:2011.0002/input/input2
hid-generic 0003:413C:2011.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:1d.0-1.8.1/input0
usb 1-1.6.1: new high-speed USB device number 5 using ehci-pci
input: Dell Dell Multimedia Pro Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1:1.1/0003:413C:2011.0003/input/input3
input: Dell Dell Multimedia Pro Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1:1.1/0003:413C:2011.0003/input/input4
hid-generic 0003:413C:2011.0003: input,hidraw2: USB HID v1.10 Device [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:1d.0-1.8.1/input1
usb 1-1.6.1: New USB device found, idVendor=0624, idProduct=0249, bcdDevice= 0.00
usb 1-1.6.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
usb 1-1.6.1: Product: Keyboard/Mouse Function
usb 1-1.6.1: Manufacturer: Avocent
usb 1-1.6.1: SerialNumber: 20120917
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.0/0003:0624:0249.0004/input/input5
hid-generic 0003:0624:0249.0004: input,hidraw3: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input0
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.1/0003:0624:0249.0005/input/input6
hid-generic 0003:0624:0249.0005: input,hidraw4: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input1
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.2/0003:0624:0249.0006/input/input7
hid-generic 0003:0624:0249.0006: input,hidraw5: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input2
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
megasas: 07.714.04.00-rh1
Warning: megaraid_sas 0000:01:00.0 [1000:0073] - this hardware has not undergone testing by CentOS Linux and might not be certified. Please consult  for certified hardware.
tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address c8:1f:66:c6:41:93
tg3 0000:02:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
megaraid_sas 0000:01:00.0: BAR:0x1  BAR's base_addr(phys):0x00000000dcffc000  mapped virt_addr:0x0000000099110474
megaraid_sas 0000:01:00.0: FW now in Ready state
megaraid_sas 0000:01:00.0: 63 bit DMA mask and 32 bit consistent mask
megaraid_sas 0000:01:00.0: requested/available msix 1/1
megaraid_sas 0000:01:00.0: current msix/online cpus	: (1/4)
megaraid_sas 0000:01:00.0: RDPQ mode	: (disabled)
tg3 0000:02:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address c8:1f:66:c6:41:94
tg3 0000:02:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:02:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
mgag200 0000:06:00.0: vgaarb: deactivate vga console
Console: switching to colour dummy device 80x25
tg3 0000:02:00.0 eno1: renamed from eth0
scsi host1: ahci
tg3 0000:02:00.1 eno2: renamed from eth1
scsi host2: ahci
[drm] Initialized mgag200 1.0.0 20110418 for 0000:06:00.0 on minor 0
scsi host3: ahci
scsi host4: ahci
megaraid_sas 0000:01:00.0: controller type	: iMR(0MB)
megaraid_sas 0000:01:00.0: Online Controller Reset(OCR)	: Enabled
megaraid_sas 0000:01:00.0: Secure JBOD support	: No
megaraid_sas 0000:01:00.0: NVMe passthru support	: No
megaraid_sas 0000:01:00.0: FW provided TM TaskAbort/Reset timeout	: 0 secs/0 secs
megaraid_sas 0000:01:00.0: JBOD sequence map support	: No
megaraid_sas 0000:01:00.0: PCI Lane Margining support	: No
megaraid_sas 0000:01:00.0: megasas_init_mfi: fw_support_ieee=67108864
megaraid_sas 0000:01:00.0: INIT adapter done
megaraid_sas 0000:01:00.0: JBOD sequence map is disabled megasas_setup_jbod_map 5711
scsi host5: ahci
scsi host6: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff100 irq 36
ata2: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff180 irq 36
ata3: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff200 irq 36
ata4: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff280 irq 36
ata5: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff300 irq 36
ata6: DUMMY
fbcon: mgag200drmfb (fb0) is primary device
megaraid_sas 0000:01:00.0: pci id		: (0x1000)/(0x0073)/(0x1028)/(0x1f51)
megaraid_sas 0000:01:00.0: unevenspan support	: no
megaraid_sas 0000:01:00.0: firmware crash dump	: no
megaraid_sas 0000:01:00.0: JBOD sequence map	: disabled
megaraid_sas 0000:01:00.0: Max firmware commands: 30 shared with nr_hw_queues = 1
scsi host0: Avago SAS based MegaRAID driver
scsi 0:2:0:0: Direct-Access     DELL     PERC H310        2.12 PQ: 0 ANSI: 5
scsi 0:2:0:0: Attached scsi generic sg0 type 0
sd 0:2:0:0: [sda] 584843264 512-byte logical blocks: (299 GB/279 GiB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 10 08
sd 0:2:0:0: [sda] Write cache: disabled, read cache: disabled, supports DPO and FUA
 sda: sda1 sda2
sd 0:2:0:0: [sda] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
Console: switching to colour frame buffer device 200x56
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
mgag200 0000:06:00.0: [drm] fb0: mgag200drmfb frame buffer device
PM: Image not found (code -22)
SGI XFS with ACLs, security attributes, quota, no debug enabled
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Starting recovery (logdev: internal)
XFS (dm-0): Ending recovery (logdev: internal)
printk: systemd: 17 output lines suppressed due to ratelimiting
audit: type=1404 audit(1623782666.759:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
SELinux:  policy capability network_peer_controls=1
SELinux:  policy capability open_perms=1
SELinux:  policy capability extended_socket_class=1
SELinux:  policy capability always_check_network=0
SELinux:  policy capability cgroup_seclabel=1
SELinux:  policy capability nnp_nosuid_transition=1
audit: type=1403 audit(1623782666.986:3): auid=4294967295 ses=4294967295 lsm=selinux res=1
systemd[1]: Successfully loaded SELinux policy in 234.842ms.
systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 34.461ms.
systemd[1]: systemd 239 (239-45.el8) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: systemd-journald.service: Succeeded.
systemd[1]: initrd-switch-root.service: Succeeded.
systemd[1]: Stopped Switch Root.
systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Stopped Journal Service.
systemd[1]: Starting Journal Service...
Adding 8253436k swap on /dev/mapper/cl-swap.  Priority:-2 extents:1 across:8253436k FS
ACPI Error: No handler for Region [SYSI] (00000000fa548e74) [IPMI] (20200925/evregion-132)
ACPI Error: Region IPMI (ID=7) has no handler (20200925/exfldio-265)
ACPI Error: Aborting method \_SB.PMI0._GHL due to previous error (AE_NOT_EXIST) (20200925/psparse-531)
ACPI Error: Aborting method \_SB.PMI0._PMC due to previous error (AE_NOT_EXIST) (20200925/psparse-531)
ACPI Error: AE_NOT_EXIST, Evaluating _PMC (20200925/power_meter-756)
IPMI message handler: version 39.2
ipmi device interface
ipmi_si: IPMI System Interface driver
ipmi_si dmi-ipmi-si.0: probing via SMBIOS
ipmi_platform: ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 10
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 10
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
ipmi_si dmi-ipmi-si.0: The BMC does not support setting the recv irq bit, compensating, but the BMC needs to be fixed.
ipmi_si dmi-ipmi-si.0: Using irq 10
ipmi_si dmi-ipmi-si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
ipmi_si dmi-ipmi-si.0: IPMI kcs interface initialized
ipmi_ssif: IPMI SSIF Interface driver
input: PC Speaker as /devices/platform/pcspkr/input/input8
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0e60
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0e68
EDAC sbridge: Seeking for: PCI ID 8086:0e79
EDAC sbridge: Seeking for: PCI ID 8086:0e6a
EDAC sbridge: Seeking for: PCI ID 8086:0e6b
EDAC sbridge: Seeking for: PCI ID 8086:0e6c
EDAC sbridge: Seeking for: PCI ID 8086:0e6d
EDAC sbridge: Seeking for: PCI ID 8086:0eb8
EDAC sbridge: Seeking for: PCI ID 8086:0ebc
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:3f:0e.0 (INTERRUPT)
EDAC sbridge:  Ver: 1.1.2 
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain dram
XFS (dm-2): Mounting V5 Filesystem
XFS (dm-2): Starting recovery (logdev: internal)
XFS (dm-2): Ending recovery (logdev: internal)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
tg3 0000:02:00.0 eno1: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0 eno1: Flow control is off for TX and off for RX
tg3 0000:02:00.0 eno1: EEE is enabled
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
perf: interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3143 > 3141), lowering kernel.perf_event_max_sample_rate to 63000
perf: interrupt took too long (3936 > 3928), lowering kernel.perf_event_max_sample_rate to 50000

Return To readwhilewrite System Information