dmesg - full_test
microcode: microcode updated early to revision 0xea, date = 2021-01-05
Linux version 5.4.0-74-generic (buildd@lcy01-amd64-023) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #83~18.04.1-Ubuntu SMP Tue May 11 16:01:00 UTC 2021 (Ubuntu 5.4.0-74.83~18.04.1-generic 5.4.114)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007d4befff] usable
BIOS-e820: [mem 0x000000007d4bf000-0x000000007d4bffff] ACPI NVS
BIOS-e820: [mem 0x000000007d4c0000-0x000000007d4c0fff] reserved
BIOS-e820: [mem 0x000000007d4c1000-0x000000008ceacfff] usable
BIOS-e820: [mem 0x000000008cead000-0x000000008e807fff] reserved
BIOS-e820: [mem 0x000000008e808000-0x000000008e843fff] ACPI data
BIOS-e820: [mem 0x000000008e844000-0x000000008ec5bfff] ACPI NVS
BIOS-e820: [mem 0x000000008ec5c000-0x000000008f7fdfff] reserved
BIOS-e820: [mem 0x000000008f7fe000-0x000000008f7fefff] usable
BIOS-e820: [mem 0x000000008f7ff000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000106effffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x7cc7e018-0x7cc9d857] usable ==> usable
e820: update [mem 0x7cc7e018-0x7cc9d857] usable ==> usable
e820: update [mem 0x7cc60018-0x7cc7da57] usable ==> usable
e820: update [mem 0x7cc60018-0x7cc7da57] usable ==> usable
e820: update [mem 0x7cc4f018-0x7cc5f857] usable ==> usable
e820: update [mem 0x7cc4f018-0x7cc5f857] usable ==> usable
e820: update [mem 0x7cc3e018-0x7cc4ee57] usable ==> usable
e820: update [mem 0x7cc3e018-0x7cc4ee57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000007cc3e017] usable
reserve setup_data: [mem 0x000000007cc3e018-0x000000007cc4ee57] usable
reserve setup_data: [mem 0x000000007cc4ee58-0x000000007cc4f017] usable
reserve setup_data: [mem 0x000000007cc4f018-0x000000007cc5f857] usable
reserve setup_data: [mem 0x000000007cc5f858-0x000000007cc60017] usable
reserve setup_data: [mem 0x000000007cc60018-0x000000007cc7da57] usable
reserve setup_data: [mem 0x000000007cc7da58-0x000000007cc7e017] usable
reserve setup_data: [mem 0x000000007cc7e018-0x000000007cc9d857] usable
reserve setup_data: [mem 0x000000007cc9d858-0x000000007d4befff] usable
reserve setup_data: [mem 0x000000007d4bf000-0x000000007d4bffff] ACPI NVS
reserve setup_data: [mem 0x000000007d4c0000-0x000000007d4c0fff] reserved
reserve setup_data: [mem 0x000000007d4c1000-0x000000008ceacfff] usable
reserve setup_data: [mem 0x000000008cead000-0x000000008e807fff] reserved
reserve setup_data: [mem 0x000000008e808000-0x000000008e843fff] ACPI data
reserve setup_data: [mem 0x000000008e844000-0x000000008ec5bfff] ACPI NVS
reserve setup_data: [mem 0x000000008ec5c000-0x000000008f7fdfff] reserved
reserve setup_data: [mem 0x000000008f7fe000-0x000000008f7fefff] usable
reserve setup_data: [mem 0x000000008f7ff000-0x000000008fffffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000106effffff] usable
efi: EFI v2.60 by American Megatrends
efi: TPMFinalLog=0x8ec2c000 ACPI 2.0=0x8e814000 ACPI=0x8e814000 SMBIOS=0x8f67e000 SMBIOS 3.0=0x8f67d000 MPS=0xfd9d0 ESRT=0x8b860118 MEMATTR=0x8b728018 TPMEventLog=0x7d59c018
secureboot: Secure boot disabled
SMBIOS 3.0.0 present.
DMI: MicroElectronics G429/Z370 Gaming K6, BIOS L1.05U 03/16/2018
tsc: Detected 3700.000 MHz processor
tsc: Detected 3699.850 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x106f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x8f7ff max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdd20-0x000fdd2f]
esrt: Reserving ESRT space from 0x000000008b860118 to 0x000000008b860150.
e820: update [mem 0x8b860000-0x8b860fff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x3d6ba000-0x3fffdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008E814000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000008E8140B8 0000EC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000008E839DE0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000008E814230 025BA9 (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x000000008EC2BF00 000040
ACPI: APIC 0x000000008E839EF8 0000F4 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000008E839FF0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000008E83A038 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000008E83A0D8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000008E83A118 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: MSDM 0x000000008E83A4C0 000055 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000008E83A518 003156 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000008E83D670 0024C8 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x000000008E83FB38 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000008E83FB70 000CB0 (v02 INTEL xh_kbl_s 00000000 INTL 20160422)
ACPI: UEFI 0x000000008E840820 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: SSDT 0x000000008E840868 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: AAFT 0x000000008E842018 000505 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: LPIT 0x000000008E842520 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000008E8425B8 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
ACPI: SSDT 0x000000008E842700 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
ACPI: DBGP 0x000000008E842C18 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000008E842C50 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: DMAR 0x000000008E842CA8 000070 (v01 INTEL KBL 00000001 INTL 00000001)
ACPI: BGRT 0x000000008E842D18 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: UEFI 0x000000008E842D50 00063A (v01 INTEL RstSataE 00000000 ?? 00000000)
ACPI: UEFI 0x000000008E843390 00005C (v01 INTEL RstSataV 00000000 ?? 00000000)
ACPI: TPM2 0x000000008E8433F0 000034 (v03 ALASKA A M I 00000001 AMI 00000000)
ACPI: WSMT 0x000000008E843428 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000106effffff]
NODE_DATA(0) allocated [mem 0x106efd5000-0x106effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000106effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000007d4befff]
node 0: [mem 0x000000007d4c1000-0x000000008ceacfff]
node 0: [mem 0x000000008f7fe000-0x000000008f7fefff]
node 0: [mem 0x0000000100000000-0x000000106effffff]
Zeroed struct page in unavailable ranges: 16823 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000106effffff]
On node 0 totalpages: 16760393
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 8955 pages used for memmap
DMA32 zone: 573100 pages, LIFO batch:63
Normal zone: 252864 pages used for memmap
Normal zone: 16183296 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x8936a000-0x895aafff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0x7cc3e000-0x7cc3efff]
PM: Registered nosave memory: [mem 0x7cc4e000-0x7cc4efff]
PM: Registered nosave memory: [mem 0x7cc4f000-0x7cc4ffff]
PM: Registered nosave memory: [mem 0x7cc5f000-0x7cc5ffff]
PM: Registered nosave memory: [mem 0x7cc60000-0x7cc60fff]
PM: Registered nosave memory: [mem 0x7cc7d000-0x7cc7dfff]
PM: Registered nosave memory: [mem 0x7cc7e000-0x7cc7efff]
PM: Registered nosave memory: [mem 0x7cc9d000-0x7cc9dfff]
PM: Registered nosave memory: [mem 0x7d4bf000-0x7d4bffff]
PM: Registered nosave memory: [mem 0x7d4c0000-0x7d4c0fff]
PM: Registered nosave memory: [mem 0x8936a000-0x895aafff]
PM: Registered nosave memory: [mem 0x8b860000-0x8b860fff]
PM: Registered nosave memory: [mem 0x8cead000-0x8e807fff]
PM: Registered nosave memory: [mem 0x8e808000-0x8e843fff]
PM: Registered nosave memory: [mem 0x8e844000-0x8ec5bfff]
PM: Registered nosave memory: [mem 0x8ec5c000-0x8f7fdfff]
PM: Registered nosave memory: [mem 0x8f7ff000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x90000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
Built 1 zonelists, mobility grouping on. Total pages: 16498484
Policy zone: Normal
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 65722280K/67041572K available (14339K kernel code, 2381K rwdata, 4980K rodata, 2712K init, 5012K bss, 1319292K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x41/0x550 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 44298 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000008d7e5000 end: 0x0000008d804fff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa99074b1c, max_idle_ns: 881590506587 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7399.70 BogoMIPS (lpj=14799400)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
TAA: Mitigation: Clear CPU buffers
SRBDS: Mitigation: Microcode
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xa)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6
MDS CPU bug present and SMT on, data leak possible. See for more details.
TAA CPU bug present and SMT on, data leak possible. See for more details.
#7 #8 #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 12 processors activated (88796.40 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x7d4bf000-0x7d4bffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x8e844000-0x8ec5bfff] (4292608 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 05:05:23, date: 2021-06-16
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1623819923.048:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
KVM setup pv remote TLB flush
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9121E7BA2800 00077A (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9121E7230C00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9121E7BD46C0 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9121E7BA1800 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9121E7870000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9121E7230800 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9121E7231000 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: Power Resource [WRST] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf630000-0xdf63ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf64e000-0xdf64efff 64bit]
pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf64d000-0xdf64dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:2822] type 00 class 0x010400
pci 0000:00:17.0: reg 0x10: [mem 0xdf648000-0xdf649fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf64c000-0xdf64c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf64b000-0xdf64b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:a291] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:a292] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:a297] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a2c9] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf644000-0xdf647fff]
pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf640000-0xdf643fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf620000-0xdf62ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf64a000-0xdf64a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdf600000-0xdf61ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [10de:1b81] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.0: BAR 3: assigned to efifb
pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: [15b7:5006] type 00 class 0x010802
pci 0000:02:00.0: reg 0x10: [mem 0xdf500000-0xdf503fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xdf504000-0xdf5040ff 64bit]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.0: bridge window [mem 0xdf500000-0xdf5fffff]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:04:00.0: reg 0x10: [io 0xd050-0xd057]
pci 0000:04:00.0: reg 0x14: [io 0xd040-0xd043]
pci 0000:04:00.0: reg 0x18: [io 0xd030-0xd037]
pci 0000:04:00.0: reg 0x1c: [io 0xd020-0xd023]
pci 0000:04:00.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:04:00.0: reg 0x24: [mem 0xdf400000-0xdf4001ff]
pci 0000:00:1c.1: PCI bridge to [bus 04]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xdf400000-0xdf4fffff]
pci 0000:05:00.0: [8086:1539] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xdf300000-0xdf31ffff]
pci 0000:05:00.0: reg 0x18: [io 0xc000-0xc01f]
pci 0000:05:00.0: reg 0x1c: [mem 0xdf320000-0xdf323fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 05]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xdf300000-0xdf3fffff]
pci 0000:06:00.0: [1b21:2142] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xdf200000-0xdf207fff 64bit]
pci 0000:06:00.0: enabling Extended Tags
pci 0000:06:00.0: PME# supported from D0
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:07:00.0: [8086:24fb] type 00 class 0x028000
pci 0000:07:00.0: reg 0x10: [mem 0xdf100000-0xdf101fff 64bit]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:00:1d.0: PCI bridge to [bus 08]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x7cc3e018-0x7fffffff]
e820: reserve RAM buffer [mem 0x7cc4f018-0x7fffffff]
e820: reserve RAM buffer [mem 0x7cc60018-0x7fffffff]
e820: reserve RAM buffer [mem 0x7cc7e018-0x7fffffff]
e820: reserve RAM buffer [mem 0x7d4bf000-0x7fffffff]
e820: reserve RAM buffer [mem 0x8936a000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8b860000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8cead000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8f7ff000-0x8fffffff]
e820: reserve RAM buffer [mem 0x106f000000-0x106fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0280-0x028f] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x02a0-0x02af] has been reserved
system 00:00: [io 0x02b0-0x02bf] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0x1800-0x18fe] has been reserved
system 00:03: [io 0x164e-0x164f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0800-0x087f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x1854-0x1857] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0xff00-0xfffe] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.0: bridge window [mem 0xdf500000-0xdf5fffff]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.1: PCI bridge to [bus 04]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xdf400000-0xdf4fffff]
pci 0000:00:1c.2: PCI bridge to [bus 05]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xdf300000-0xdf3fffff]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:00:1d.0: PCI bridge to [bus 08]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xdf500000-0xdf5fffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xdf400000-0xdf4fffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xdf300000-0xdf3fffff]
pci_bus 0000:06: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:07: resource 1 [mem 0xdf100000-0xdf1fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x6b0 took 21137 usecs
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
pci 0000:06:00.0: PME# does not work under D0, disabling it
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 42256K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x8536a000-0x8936a000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xd1000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-74-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-74-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:06:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-74-generic xhci-hcd
usb usb3: SerialNumber: 0000:06:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:06:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-74-generic xhci-hcd
usb usb4: SerialNumber: 0000:06:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: registered as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
efivars: duplicate variable: DeploymentModeNv-97e8965f-c761-4f48-b6e4-9ffa9cb2a2d6
resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:08 [mem 0xfdb00000-0xfdffffff]
caller pmc_core_probe+0x8e/0x2e0 mapping multiple BARs
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x906ea, pf=0x2, revision=0xea
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1023493777, 423705)->(1031270018, -7352536)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 26d2b911816ee3832a1a1ced11465f3a6eb97669'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 9:243:62
memory memory223: hash matches
memory memory90: hash matches
rtc_cmos 00:05: setting system clock to 2021-06-16T05:05:24 UTC (1623819924)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2712K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1164K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
usb 2-6: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
dca service started, version 1.12.1
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: controller can't do SNTF, turning off CAP_SNTF
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
nvme nvme0: pci function 0000:02:00.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl RAID mode
ahci 0000:00:17.0: flags: 64bit ncq led clo only pio slum part ems deso sadm sds apst
usb 2-6: New USB device found, idVendor=0bc2, idProduct=2344, bcdDevice= 7.12
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: Portable
usb 2-6: Manufacturer: Seagate
usb 2-6: SerialNumber: NAAHT3QL
pps pps0: new PPS source ptp0
igb 0000:05:00.0: added PHC on eth0
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 70:85:c2:6e:a4:dc
igb 0000:05:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:05:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
usb 3-2: new full-speed USB device number 2 using xhci_hcd
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf64b000 port 0xdf64b100 irq 138
ata2: SATA max UDMA/133 abar m2048@0xdf64b000 port 0xdf64b180 irq 138
ata3: SATA max UDMA/133 abar m2048@0xdf64b000 port 0xdf64b200 irq 138
ata4: SATA max UDMA/133 abar m2048@0xdf64b000 port 0xdf64b280 irq 138
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host4: ahci
scsi host5: ahci
ata5: SATA max UDMA/133 abar m512@0xdf400000 port 0xdf400100 irq 146
ata6: SATA max UDMA/133 abar m512@0xdf400000 port 0xdf400180 irq 146
igb 0000:05:00.0 enp5s0: renamed from eth0
usb 1-1: new high-speed USB device number 2 using xhci_hcd
nvme nvme0: 12/0/0 default/read/poll queues
nvme0n1: p1 p2 p3 p4 p5
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 70:85:c2:6e:a4:da
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.24
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
usb 1-1: Manufacturer: GenesysLogic
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
No Local Variables are initialized for Method [_GTF]
No Arguments are initialized for method [_GTF]
ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
ata2.00: ATA-10: WDC WD5000LUCX-28LYRY0, 01.01A01, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
No Local Variables are initialized for Method [_GTF]
No Arguments are initialized for method [_GTF]
ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
ata4.00: ATAPI: DRW-24F1ST d, 1.00, max UDMA/133
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
No Local Variables are initialized for Method [_GTF]
No Arguments are initialized for method [_GTF]
ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD5000LUCX-2 1A01 PQ: 0 ANSI: 5
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
No Local Variables are initialized for Method [_GTF]
No Arguments are initialized for method [_GTF]
ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
ata3.00: ATAPI: HL-DT-ST BD-RE WH16NS40, 1.05, max UDMA/133
scsi 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
No Local Variables are initialized for Method [_GTF]
No Arguments are initialized for method [_GTF]
ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
ata4.00: configured for UDMA/133
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
No Local Variables are initialized for Method [_GTF]
No Arguments are initialized for method [_GTF]
ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE WH16NS40 1.05 PQ: 0 ANSI: 5
usb 3-2: New USB device found, idVendor=0764, idProduct=0601, bcdDevice= 2.00
usb 3-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 3-2: Product: CP1000PFCLCDa
usb 3-2: Manufacturer: CPS
usb 3-2: SerialNumber: CX1KX2000056
sda: sda1
hidraw: raw HID events driver (C) Jiri Kosina
sd 1:0:0:0: [sda] Attached SCSI disk
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:0764:0601.0001: hiddev0,hidraw0: USB HID v1.10 Device [CPS CP1000PFCLCDa] on usb-0000:06:00.0-2/input0
sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
usb 2-7: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
scsi 3:0:0:0: CD-ROM ASUS DRW-24F1ST d 1.00 PQ: 0 ANSI: 5
usb 2-7: New USB device found, idVendor=174c, idProduct=3074, bcdDevice= 1.00
usb 2-7: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 2-7: Product: ASM107x
usb 2-7: Manufacturer: ASRock
hub 2-7:1.0: USB hub found
hub 2-7:1.0: 4 ports detected
usbcore: registered new interface driver usb-storage
scsi host6: uas
usbcore: registered new interface driver uas
scsi 6:0:0:0: Direct-Access Seagate Portable 0712 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 6:0:0:0: [sdb] 4096-byte physical blocks
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 53 00 00 08
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATA-11: WDC WDS250G2B0A-00SM50, X61130WD, max UDMA/133
ata5.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata5.00: configured for UDMA/133
sr 3:0:0:0: [sr1] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
sr 3:0:0:0: Attached scsi CD-ROM sr1
sr 3:0:0:0: Attached scsi generic sg3 type 5
scsi 4:0:0:0: Direct-Access ATA WDC WDS250G2B0A- 30WD PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
tsc: Refined TSC clocksource calibration: 3695.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d2284b57, max_idle_ns: 881590451434 ns
clocksource: Switched to clocksource tsc
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
usb 1-2: new high-speed USB device number 3 using xhci_hcd
usb 1-2: New USB device found, idVendor=091e, idProduct=4c99, bcdDevice= 0.01
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=5
usb 1-2: SerialNumber: 0000c562251f
usb 1-1.1: new high-speed USB device number 4 using xhci_hcd
sdb: sdb1 sdb2
sd 6:0:0:0: [sdb] Attached SCSI disk
usb 1-1.1: New USB device found, idVendor=04b8, idProduct=0156, bcdDevice= 1.00
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: ES-400
usb 1-1.1: Manufacturer: EPSON
usb 1-1.1: SerialNumber: 583248383230373529
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ATA-10: WDC WD10EZEX-08WN4A0, 02.01A02, max UDMA/100
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata6.00: configured for UDMA/100
scsi 5:0:0:0: Direct-Access ATA WDC WD10EZEX-08W 1A02 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 5:0:0:0: [sdd] 4096-byte physical blocks
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: Attached scsi generic sg5 type 0
usb 1-3: new high-speed USB device number 5 using xhci_hcd
sdd: sdd1
sd 5:0:0:0: [sdd] Attached SCSI disk
usb 1-3: New USB device found, idVendor=174c, idProduct=2074, bcdDevice= 1.00
usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 1-3: Product: ASM107x
usb 1-3: Manufacturer: ASRock
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
usb 1-1.3: new high-speed USB device number 6 using xhci_hcd
usb 1-1.3: New USB device found, idVendor=04e8, idProduct=3299, bcdDevice= 1.00
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: ML-2525W Series
usb 1-1.3: Manufacturer: Samsung Electronics Co., Ltd.
usb 1-1.3: SerialNumber: Z4L0BABZ500760H
usb 1-7: new full-speed USB device number 7 using xhci_hcd
usb 1-7: New USB device found, idVendor=062a, idProduct=5918, bcdDevice= 1.02
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: 2.4G Keyboard Mouse
usb 1-7: Manufacturer: MOSART Semi.
input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:062A:5918.0002/input/input6
hid-generic 0003:062A:5918.0002: input,hidraw1: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-7/input0
input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:062A:5918.0003/input/input7
input: MOSART Semi. 2.4G Keyboard Mouse Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:062A:5918.0003/input/input8
input: MOSART Semi. 2.4G Keyboard Mouse System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:062A:5918.0003/input/input9
input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:062A:5918.0003/input/input10
hid-generic 0003:062A:5918.0003: input,hiddev1,hidraw2: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-7/input1
usb 1-8: new low-speed USB device number 8 using xhci_hcd
usb 1-8: New USB device found, idVendor=258a, idProduct=1006, bcdDevice= 1.00
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-8: Product: USB KEYBOARD
usb 1-8: Manufacturer: SINO WEALTH
input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:258A:1006.0004/input/input11
hid-generic 0003:258A:1006.0004: input,hidraw3: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-8/input0
input: SINO WEALTH USB KEYBOARD System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:258A:1006.0005/input/input12
input: SINO WEALTH USB KEYBOARD Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:258A:1006.0005/input/input13
input: SINO WEALTH USB KEYBOARD Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:258A:1006.0005/input/input15
hid-generic 0003:258A:1006.0005: input,hiddev2,hidraw4: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-8/input1
usb 1-9: new high-speed USB device number 9 using xhci_hcd
usb 1-9: New USB device found, idVendor=046d, idProduct=081b, bcdDevice= 0.12
usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 1-9: SerialNumber: 665DA190
usb 1-11: new high-speed USB device number 10 using xhci_hcd
usb 1-11: New USB device found, idVendor=058f, idProduct=6366, bcdDevice= 1.00
usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-11: Product: Flash Card Reader/Writer
usb 1-11: Manufacturer: Generic
usb 1-11: SerialNumber: 058F63666479
usb-storage 1-11:1.0: USB Mass Storage device detected
scsi host7: usb-storage 1-11:1.0
usb 1-14: new full-speed USB device number 11 using xhci_hcd
usb 1-14: New USB device found, idVendor=8087, idProduct=0aa7, bcdDevice= 0.01
usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
fbcon: Taking over console
Console: switching to colour frame buffer device 128x48
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
efivars: duplicate variable: DeploymentModeNv-97e8965f-c761-4f48-b6e4-9ffa9cb2a2d6
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Socket.
EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd-journald[386]: Received request to flush runtime journal from PID 1
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
systemd-journald[386]: File /var/log/journal/07296a484ea8452b9992bc55fee15522/system.journal corrupted or uncleanly shut down, renaming and replacing.
EDAC ie31200: No ECC support
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
usblp 1-1.3:1.0: usblp3: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3299
usbcore: registered new interface driver usblp
mc: Linux media interface: v0.10
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
videodev: Linux video capture interface: v2.00
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370810225019140f39
Bluetooth: hci0: Intel device is already patched. patch num: 39
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
uvcvideo: Found UVC 1.00 device (046d:081b)
scsi 7:0:0:0: Direct-Access Generic- Multiple Reader 1.11 PQ: 0 ANSI: 4
sd 7:0:0:0: Attached scsi generic sg6 type 0
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:07:00.0: enabling device (0000 -> 0002)
input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input16
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
iwlwifi 0000:07:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
sd 7:0:0:0: [sde] Attached SCSI removable disk
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
cryptd: max_cpu_qlen set to 1000
iwlwifi 0000:07:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
iwlwifi 0000:07:00.0: base HW address: 40:a3:cc:75:7c:36
nvidia-nvlink: Nvlink Core is being initialized, major device number 234
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone0: failed to read out thermal zone (-61)
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 460.73.01 Thu Apr 1 21:40:36 UTC 2021
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 460.73.01 Thu Apr 1 21:32:31 UTC 2021
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
iwlwifi 0000:07:00.0 wlp7s0: renamed from wlan0
nvidia-uvm: Loaded the UVM driver, major device number 510.
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain dram
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-9: set resolution quirk: cval->res = 384
usbcore: registered new interface driver snd-usb-audio
audit: type=1400 audit(1623819930.018:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=981 comm="apparmor_parser"
audit: type=1400 audit(1623819930.018:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=980 comm="apparmor_parser"
audit: type=1400 audit(1623819930.018:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=979 comm="apparmor_parser"
audit: type=1400 audit(1623819930.018:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=979 comm="apparmor_parser"
audit: type=1400 audit(1623819930.018:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=979 comm="apparmor_parser"
audit: type=1400 audit(1623819930.018:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=987 comm="apparmor_parser"
audit: type=1400 audit(1623819930.018:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=983 comm="apparmor_parser"
audit: type=1400 audit(1623819930.018:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=985 comm="apparmor_parser"
audit: type=1400 audit(1623819930.018:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=976 comm="apparmor_parser"
audit: type=1400 audit(1623819930.018:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=976 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input26
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input27
input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input28
input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input29
input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input30
igb 0000:05:00.0 enp5s0: igb: enp5s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
usb 1-9: reset high-speed USB device number 9 using xhci_hcd
usblp3: removed
usblp 1-1.3:1.0: usblp3: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3299
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
input: 00:18:91:88:80:A3 as /devices/virtual/input/input31
Bluetooth: hci0: SCO packet for unknown connection handle 0
Bluetooth: hci0: SCO packet for unknown connection handle 0
Bluetooth: hci0: SCO packet for unknown connection handle 0
Bluetooth: hci0: SCO packet for unknown connection handle 0
Bluetooth: hci0: SCO packet for unknown connection handle 0
Bluetooth: hci0: SCO packet for unknown connection handle 0
Bluetooth: hci0: SCO packet for unknown connection handle 257
Bluetooth: hci0: SCO packet for unknown connection handle 257
kauditd_printk_skb: 59 callbacks suppressed
audit: type=1400 audit(1623838277.358:71): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/nvidia/nvidia-application-profiles-460.73.01-rc" pid=3720 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1623838277.362:72): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/3720/comm" pid=3720 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1623838277.374:73): apparmor="ALLOWED" operation="sendmsg" profile="libreoffice-soffice" pid=3720 comm="soffice.bin" family="unix" sock_type="dgram" protocol=0 requested_mask="send" denied_mask="send" addr=none peer_addr="@7661722F72756E2F6E76696469612D786472697665722D65373334666532650000000000000000000000000000000000000000000000000000000000000000" peer="unconfined"
audit: type=1400 audit(1623838277.374:74): apparmor="ALLOWED" operation="sendmsg" profile="libreoffice-soffice" pid=3720 comm="soffice.bin" family="unix" sock_type="dgram" protocol=0 requested_mask="send" denied_mask="send" addr=none peer_addr="@7661722F72756E2F6E76696469612D786472697665722D65373334666532650000000000000000000000000000000000000000000000000000000000000000" peer="unconfined"
audit: type=1400 audit(1623838277.378:75): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/modules" pid=3720 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1623838277.378:76): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/devices" pid=3720 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1623838277.378:77): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/driver/nvidia/params" pid=3720 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1623838277.378:78): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/dev/nvidiactl" pid=3720 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=0
audit: type=1400 audit(1623838277.378:79): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/devices/system/memory/block_size_bytes" pid=3720 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1623838277.378:80): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/modules" pid=3720 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
kauditd_printk_skb: 264 callbacks suppressed
audit: type=1400 audit(1623838283.038:345): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/dan/.thunderbird/profiles.ini" pid=3719 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000