dmesg - nothing
microcode: microcode updated early to revision 0x28, date = 2019-11-12
Linux version 5.8.0-53-generic (buildd@lcy01-amd64-012) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #60~20.04.1-Ubuntu SMP Thu May 6 09:52:46 UTC 2021 (Ubuntu 5.8.0-53.60~20.04.1-generic 5.8.18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x0000000000097fff] usable
BIOS-e820: [mem 0x0000000000098000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000002eb7efff] usable
BIOS-e820: [mem 0x000000002eb7f000-0x000000002fe7efff] reserved
BIOS-e820: [mem 0x000000002fe7f000-0x000000002ff7efff] ACPI NVS
BIOS-e820: [mem 0x000000002ff7f000-0x000000002fffefff] ACPI data
BIOS-e820: [mem 0x000000002ffff000-0x000000002fffffff] usable
BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff810000-0x00000000ff82efff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000002aedfffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x27fd3018-0x27feb657] usable ==> usable
e820: update [mem 0x27fd3018-0x27feb657] usable ==> usable
e820: update [mem 0x27fc2018-0x27fd2057] usable ==> usable
e820: update [mem 0x27fc2018-0x27fd2057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x0000000000097fff] usable
reserve setup_data: [mem 0x0000000000098000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000027fc2017] usable
reserve setup_data: [mem 0x0000000027fc2018-0x0000000027fd2057] usable
reserve setup_data: [mem 0x0000000027fd2058-0x0000000027fd3017] usable
reserve setup_data: [mem 0x0000000027fd3018-0x0000000027feb657] usable
reserve setup_data: [mem 0x0000000027feb658-0x000000002eb7efff] usable
reserve setup_data: [mem 0x000000002eb7f000-0x000000002fe7efff] reserved
reserve setup_data: [mem 0x000000002fe7f000-0x000000002ff7efff] ACPI NVS
reserve setup_data: [mem 0x000000002ff7f000-0x000000002fffefff] ACPI data
reserve setup_data: [mem 0x000000002ffff000-0x000000002fffffff] usable
reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000ff810000-0x00000000ff82efff] reserved
reserve setup_data: [mem 0x0000000100000000-0x00000002aedfffff] usable
efi: EFI v2.10 by HPQ
efi: ACPI=0x2fffe000 ACPI 2.0=0x2fffe014 SMBIOS=0x2f32e118
secureboot: Secure boot disabled
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP ZBook 15/1909, BIOS L70 Ver. 01.10 06/24/2014
tsc: Fast TSC calibration using PIT
tsc: Detected 2693.772 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x2aee00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00FF800000 mask 7FFF800000 write-protect
1 base 0000000000 mask 7FC0000000 write-back
2 base 003C000000 mask 7FFC000000 uncachable
3 base 003B000000 mask 7FFF000000 uncachable
4 base 0100000000 mask 7F00000000 write-back
5 base 0200000000 mask 7F80000000 write-back
6 base 0280000000 mask 7FC0000000 write-back
7 base 02B0000000 mask 7FF0000000 uncachable
8 base 02AF000000 mask 7FFF000000 uncachable
9 base 02AEE00000 mask 7FFFE00000 uncachable
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x30000 max_arch_pfn = 0x400000000
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x19fd1000-0x1d656fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000002FFFE014 000024 (v02 HPQOEM)
ACPI: XSDT 0x000000002FFFE120 0000AC (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 0x000000002FFFC000 00010C (v05 HPQOEM 1909 00000001 HP 00000001)
ACPI: DSDT 0x000000002FFD2000 024624 (v02 HPQOEM 1909 00000001 INTL 20110112)
ACPI: FACS 0x000000002FE31000 000040
ACPI: FACS 0x000000002FE31000 000040
ACPI: HPET 0x000000002FFFB000 000038 (v01 HPQOEM 1909 00000001 HP 00000001)
ACPI: APIC 0x000000002FFFA000 0000BC (v01 HPQOEM 1909 00000001 HP 00000001)
ACPI: MCFG 0x000000002FFF9000 00003C (v01 HPQOEM 1909 00000001 HP 00000001)
ACPI: TCPA 0x000000002FFF7000 000032 (v02 HPQOEM 1909 00000000 HP 00000001)
ACPI: SSDT 0x000000002FFCF000 00045D (v01 HPQOEM SataAhci 00001000 INTL 20110112)
ACPI: SSDT 0x000000002FFCE000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
ACPI: SLIC 0x000000002FFCD000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: FPDT 0x000000002FFCB000 000044 (v01 HPQOEM 1909 00000001 HP 00000001)
ACPI: BGRT 0x000000002FFCA000 000038 (v00 HPQOEM 1909 00000001 HP 00000001)
ACPI: SSDT 0x000000002FFC4000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
ACPI: SSDT 0x000000002FFC3000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
ACPI: SSDT 0x000000002FFC2000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112)
ACPI: SSDT 0x000000002FFC1000 0005B6 (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
ACPI: SSDT 0x000000002FFBE000 002F11 (v01 HP NVSGTBL 00001000 INTL 20110112)
ACPI: ASF! 0x000000002FFF8000 0000A5 (v32 HPQOEM 1909 00000001 HP 00000001)
ACPI: DMAR 0x000000002FFBD000 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000002aedfffff]
NODE_DATA(0) allocated [mem 0x2aedd6000-0x2aedfffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000002aedfffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x0000000000097fff]
node 0: [mem 0x0000000000100000-0x000000002eb7efff]
node 0: [mem 0x000000002ffff000-0x000000002fffffff]
node 0: [mem 0x0000000100000000-0x00000002aedfffff]
Zeroed struct page in unavailable ranges: 9962 pages
Initmem setup node 0 [mem 0x0000000000001000-0x00000002aedfffff]
On node 0 totalpages: 1956118
DMA zone: 64 pages used for memmap
DMA zone: 1072 pages reserved
DMA zone: 3990 pages, LIFO batch:0
DMA32 zone: 2926 pages used for memmap
DMA32 zone: 187264 pages, LIFO batch:63
Normal zone: 27576 pages used for memmap
Normal zone: 1764864 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x3b200000-0x4f1fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x2b922000-0x2b929fff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: hibernation: Registered nosave memory: [mem 0x00098000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x27fc2000-0x27fc2fff]
PM: hibernation: Registered nosave memory: [mem 0x27fd2000-0x27fd2fff]
PM: hibernation: Registered nosave memory: [mem 0x27fd3000-0x27fd3fff]
PM: hibernation: Registered nosave memory: [mem 0x27feb000-0x27febfff]
PM: hibernation: Registered nosave memory: [mem 0x2b922000-0x2b929fff]
PM: hibernation: Registered nosave memory: [mem 0x2eb7f000-0x2fe7efff]
PM: hibernation: Registered nosave memory: [mem 0x2fe7f000-0x2ff7efff]
PM: hibernation: Registered nosave memory: [mem 0x2ff7f000-0x2fffefff]
PM: hibernation: Registered nosave memory: [mem 0x30000000-0x3b1fffff]
PM: hibernation: Registered nosave memory: [mem 0x3b200000-0x4f1fffff]
PM: hibernation: Registered nosave memory: [mem 0x4f200000-0xe00f7fff]
PM: hibernation: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
PM: hibernation: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xff80ffff]
PM: hibernation: Registered nosave memory: [mem 0xff810000-0xff82efff]
PM: hibernation: Registered nosave memory: [mem 0xff82f000-0xffffffff]
[mem 0x4f200000-0xe00f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 1924480
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 7436184K/7824472K available (14339K kernel code, 2537K rwdata, 5456K rodata, 2644K init, 4916K bss, 388288K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 46469 entries in 182 pages
ftrace: allocated 182 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200528
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
DMAR: RMRR base: 0x0000002fd18000 end: 0x0000002fd37fff
DMAR: RMRR base: 0x0000003b000000 end: 0x0000004f1fffff
DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR [0x000000003b000000-0x000000004f1fffff], contact BIOS vendor for fixes
DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR [0x000000003b000000-0x000000004f1fffff]
BIOS vendor: Hewlett-Packard; Ver: L70 Ver. 01.10; Product Version: A3009DD10203
DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d4431491f, max_idle_ns: 440795273767 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.54 BogoMIPS (lpj=10775088)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
SRBDS: Mitigation: Microcode
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
MDS CPU bug present and SMT on, data leak possible. See for more details.
#2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (43100.35 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x2fe7f000-0x2ff7efff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 01:26:10, date: 2021-05-23
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
NET: Registered protocol family 16
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1621733170.048:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF93C125343400 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF93C12533C000 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF93C125262A00 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 9 GPEs in block 00 to 3F
ACPI: Power Resource [APPR] (off)
ACPI: Power Resource [COMP] (off)
ACPI: Power Resource [LPP] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x4f200000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window]
pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xcc400000-0xcc7fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xcca20000-0xcca2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xcca35000-0xcca3500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0x60b0-0x60b7]
pci 0000:00:16.3: reg 0x14: [mem 0xcca3c000-0xcca3cfff]
pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xcca00000-0xcca1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xcca3b000-0xcca3bfff]
pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xcca3a000-0xcca3a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xcca30000-0xcca33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xcca39000-0xcca393ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af]
pci 0000:00:1f.2: reg 0x14: [io 0x60bc-0x60bf]
pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7]
pci 0000:00:1f.2: reg 0x1c: [io 0x60b8-0x60bb]
pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
pci 0000:00:1f.2: reg 0x24: [mem 0xcca38000-0xcca387ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xcca34000-0xcca340ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
pci 0000:01:00.0: [10de:0ff6] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xcb000000-0xcbffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x50000000-0x5fffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0x60000000-0x61ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xcc000000-0xcc003fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff]
pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref]
acpiphp: Slot [1-1] registered
pci 0000:00:1c.4: PCI bridge to [bus 3b-5b]
pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff]
pci 0000:5c:00.0: [8086:08b1] type 00 class 0x028000
pci 0000:5c:00.0: reg 0x10: [mem 0xcc900000-0xcc901fff 64bit]
pci 0000:5c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 5c]
pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff]
pci 0000:5d:00.0: [10ec:5249] type 00 class 0xff0000
pci 0000:5d:00.0: reg 0x10: [mem 0xcc800000-0xcc800fff]
pci 0000:5d:00.0: supports D1 D2
pci 0000:5d:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.7: ASPM: current common clock configuration is inconsistent, reconfiguring
pci 0000:00:1c.7: PCI bridge to [bus 5d]
pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x16
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:00:02.0: vgaarb: no bridge control possible
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x00098000-0x0009ffff]
e820: reserve RAM buffer [mem 0x27fc2018-0x27ffffff]
e820: reserve RAM buffer [mem 0x27fd3018-0x27ffffff]
e820: reserve RAM buffer [mem 0x2b922000-0x2bffffff]
e820: reserve RAM buffer [mem 0x2eb7f000-0x2fffffff]
e820: reserve RAM buffer [mem 0x2aee00000-0x2afffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0x4f210000-0x4f21ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
system 00:02: [io 0x0200-0x027f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] has been reserved
system 00:02: [io 0xef80-0xef9f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:06: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs SYN300a SYN0100 SYN0002 PNP0f13 (active)
system 00:08: [mem 0x20000000-0x201fffff] could not be reserved
system 00:08: [mem 0x40004000-0x40004fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-3a] add_size 1000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3b-5b] add_size 200000 add_align 100000
pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 5d] add_size 1000
pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 5d] add_size 200000 add_align 100000
pci 0000:00:1c.4: BAR 15: assigned [mem 0x4f300000-0x4f4fffff 64bit pref]
pci 0000:00:1c.7: BAR 15: assigned [mem 0x4f500000-0x4f6fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.7: BAR 13: assigned [io 0x7000-0x7fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xcc080000-0xcc0fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff]
pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 3b-5b]
pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff]
pci 0000:00:1c.4: bridge window [mem 0x4f300000-0x4f4fffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 5c]
pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff]
pci 0000:00:1c.7: PCI bridge to [bus 5d]
pci 0000:00:1c.7: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff]
pci 0000:00:1c.7: bridge window [mem 0x4f500000-0x4f6fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x4f200000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window]
pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0xcb000000-0xcc0fffff]
pci_bus 0000:01: resource 2 [mem 0x50000000-0x61ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xb4000000-0xca0fffff]
pci_bus 0000:02: resource 2 [mem 0x70000000-0x91ffffff 64bit pref]
pci_bus 0000:3b: resource 0 [io 0x3000-0x4fff]
pci_bus 0000:3b: resource 1 [mem 0xb0000000-0xb3ffffff]
pci_bus 0000:3b: resource 2 [mem 0x4f300000-0x4f4fffff 64bit pref]
pci_bus 0000:5c: resource 1 [mem 0xcc900000-0xcc9fffff]
pci_bus 0000:5d: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:5d: resource 1 [mem 0xcc800000-0xcc8fffff]
pci_bus 0000:5d: resource 2 [mem 0x4f500000-0x4f6fffff 64bit pref]
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:14.0: enabling device (0000 -> 0002)
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 55832K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x23780000-0x27780000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xa0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.5.1 model 0x3C
intel_idle: Local APIC timer is reliable in all C-states
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [CPUZ] (44 C)
ACPI BIOS Error (bug): Could not resolve symbol [\_TZ.PSL.CFGD], AE_NOT_FOUND (20200528/psargs-330)
No Local Variables are initialized for Method [PSL_]
No Arguments are initialized for method [PSL_]
ACPI Error: Aborting method \_TZ.PSL due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
ACPI Error: Aborting method \_TZ.GFXZ._PSL due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
ACPI: Invalid passive threshold
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [GFXZ] (30 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [EXTZ] (0 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [LOCZ] (0 C)
ACPI BIOS Error (bug): Could not resolve symbol [\_TZ.PSL.CFGD], AE_NOT_FOUND (20200528/psargs-330)
No Local Variables are initialized for Method [PSL_]
No Arguments are initialized for method [PSL_]
ACPI Error: Aborting method \_TZ.PSL due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
ACPI Error: Aborting method \_TZ.BATZ._PSL due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
ACPI: Invalid passive threshold
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [BATZ] (26 C)
thermal LNXTHERM:05: registered as thermal_zone5
ACPI: Thermal Zone [PCHZ] (114 C)
serial 0000:00:16.3: enabling device (0000 -> 0003)
battery: ACPI: Battery Slot [BAT0] (battery present)
battery: ACPI: Battery Slot [BAT1] (battery absent)
0000:00:16.3: ttyS4 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: TPM is disabled/deactivated (0x7)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xcca3a000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.8.0-53-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 17, io mem 0xcca39000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.8.0-53-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: registered as rtc0
rtc_cmos 00:04: setting system clock to 2021-05-23T01:26:13 UTC (1621733173)
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
tsc: Refined TSC clocksource calibration: 2693.762 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d439828ff, max_idle_ns: 440795206424 ns
clocksource: Switched to clocksource tsc
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x306c3, pf=0x10, revision=0x28
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (4746865350, 331759)->(4759999726, -12802617)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 98777587de1a02181db3622e48ff84e1fde2e33c'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: Allocated hash algorithm: sha1
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 5:200:408
RAS: Correctable Errors collector initialized.
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2644K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 688K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.8.0-53-generic
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.8.0-53-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20200528/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ahci 0000:00:1f.2: version 3.0
ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEGP.DGFX.GPIO) (20200528/utaddress-204)
ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20200528/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEGP.DGFX.GPIO) (20200528/utaddress-204)
ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20200528/utaddress-204)
ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20200528/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEGP.DGFX.GPIO) (20200528/utaddress-204)
ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20200528/utaddress-204)
ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20200528/utaddress-204)
ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20200528/utaddress-204)
ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000080F (\IO_T) (20200528/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x25 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.8.0-53-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb: port power management may be unreliable
i801_smbus 0000:00:1f.3: SPD Write Disable is set
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
i2c i2c-0: 2/4 memory slots populated (from DMI)
i2c i2c-0: Successfully instantiated SPD at 0x51
i2c i2c-0: Successfully instantiated SPD at 0x53
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38100 irq 32
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38200 irq 32
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38380 irq 32
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 34:64:a9:c9:01:65
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 enp0s25: renamed from eth0
usb 3-7: new high-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: ST500LM021-1KJ152, 0002LIM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST500LM021-1KJ15 LIM1 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-7: New USB device found, idVendor=04f2, idProduct=b3ed, bcdDevice=66.63
usb 3-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 3-7: Product: HP HD Webcam
usb 3-7: Manufacturer: Chicony Electronics Co.,Ltd.
usb 3-7: SerialNumber: 200901010001
usb 3-9: new low-speed USB device number 3 using xhci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
usb 3-9: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: USB Optical Mouse
usb 3-9: Manufacturer: PixArt
input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input9
usb 3-12: new full-speed USB device number 4 using xhci_hcd
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
usb 3-12: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
usb 3-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:093A:2510.0001/input/input11
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-9/input0
psmouse serio3: synaptics: queried max coordinates: x [..5660], y [..4730]
psmouse serio3: synaptics: queried min coordinates: x [1324..], y [1248..]
psmouse serio3: synaptics: Your touchpad (PNP: SYN300a SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd40123/0x840300/0x26800/0x0, board id: 2706, fw id: 1486004
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10
ata6.00: qc timeout (cmd 0x47)
ata6.00: READ LOG DMA EXT failed, trying PIO
ata6.00: NCQ Send/Recv Log not supported
ata6.00: ATA-10: SAM SUNG SSD PM851 120GB, Q0616A, max UDMA/133
ata6.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 32), AA
ata6.00: failed to set xfermode (err_mask=0x40)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata6.00: NCQ Send/Recv Log not supported
ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata6.00: NCQ Send/Recv Log not supported
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA SAM SUNG SSD PM8 6A PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI disk
fbcon: Taking over console
Console: switching to colour frame buffer device 128x48
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice Virtual Machine and Container Slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-postgresql.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-tor.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target ceph target allowing to start/stop all ceph*@.service instances at once.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Libvirt guests shutdown.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Finished Uncomplicated firewall.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Started Journal Service.
systemd-journald[340]: Received client request to flush runtime journal.
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
pstore: Using crash dump compression: deflate
pstore: Registered efi as persistent store backend
input: HP Wireless hotkeys as /devices/virtual/input/input13
hp_accel: hardware type HPZBook15 found
lis3lv02d: 8 bits 3DC sensor found
EDAC ie31200: No ECC support
EDAC ie31200: No ECC support
at24 0-0051: supply vcc not found, using dummy regulator
at24 0-0051: 256 byte spd EEPROM, read-only
at24 0-0053: supply vcc not found, using dummy regulator
at24 0-0053: 256 byte spd EEPROM, read-only
input: HP WMI hotkeys as /devices/virtual/input/input14
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input15
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
cryptd: max_cpu_qlen set to 1000
mc: Linux media interface: v0.10
Intel(R) Wireless WiFi driver for Linux
iwlwifi 0000:5c:00.0: enabling device (0000 -> 0002)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
iwlwifi 0000:5c:00.0: loaded firmware version 17.3216344376.0 7260-17.ucode op_mode iwlmvm
iwlwifi 0000:5c:00.0: Direct firmware load for iwl-debug-yoyo.bin failed with error -2
videodev: Linux video capture interface: v2.00
snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_idt hdaudioC0D0: inputs:
snd_hda_codec_idt hdaudioC0D0: Mic=0xc
snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
snd_hda_codec_idt hdaudioC0D0: Line=0xf
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
uvcvideo: Found UVC 1.00 device HP HD Webcam (04f2:b3ed)
input: HP HD Webcam: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input25
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370710018002030d00
checking generic (a0000000 300000) vs hw (cc400000 400000)
checking generic (a0000000 300000) vs hw (a0000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
i915 0000:00:02.0: [drm] *ERROR* conflict detected with stolen region: [mem 0x3b200000-0x4f1fffff]
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0
ACPI: Video Device [DGFX] (multi-head: yes rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input26
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input27
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
MXM: GUID detected in BIOS
ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200528/nsarguments-59)
ACPI Warning: \_SB.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200528/nsarguments-59)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEGP.DGFX handle
nouveau 0000:01:00.0: enabling device (0000 -> 0003)
nouveau 0000:01:00.0: NVIDIA GK107 (0e7360a2)
nouveau 0000:01:00.0: bios: version 80.07.ab.00.07
nouveau 0000:01:00.0: mxm: BIOS version 3.0
nouveau 0000:01:00.0: mxm: unmatched output device 00003ef9ffea6c20
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
vga_switcheroo: enabled
[TTM] Zone kernel: Available graphics memory: 3797856 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.0
nouveau 0000:01:00.0: DRM: DCB outp 03: 08015fd6 0f420020
nouveau 0000:01:00.0: DRM: DCB outp 04: 08015f92 00020020
nouveau 0000:01:00.0: DRM: DCB outp 05: 08014fc6 0f420010
nouveau 0000:01:00.0: DRM: DCB outp 06: 08014f82 00020010
nouveau 0000:01:00.0: DRM: DCB outp 08: 04038fb6 0f420010
nouveau 0000:01:00.0: DRM: DCB conn 00: 00000040
nouveau 0000:01:00.0: DRM: DCB conn 04: 01000446
nouveau 0000:01:00.0: DRM: DCB conn 05: 02000546
nouveau 0000:01:00.0: DRM: DCB conn 07: 00010746
nouveau 0000:01:00.0: DRM: DCB conn 08: 00020847
nouveau 0000:01:00.0: DRM: DCB conn 09: 00000900
nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
nouveau 0000:01:00.0: disp: chid 0 stat 0000508c reason 5 [INVALID_STATE] mthd 008c data 00000000 code 0000102c
snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
Bluetooth: hci0: unexpected event for opcode 0xfc2f
Bluetooth: hci0: Intel BT fw patch 0x57 completed & activated
iwlwifi 0000:5c:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
iwlwifi 0000:5c:00.0: base HW address: f8:16:54:8b:c6:f3
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
iwlwifi 0000:5c:00.0 wlo1: renamed from wlan0
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
audit: type=1400 audit(1621733221.322:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1392 comm="apparmor_parser"
audit: type=1400 audit(1621733221.322:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1392 comm="apparmor_parser"
audit: type=1400 audit(1621733221.334:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1393 comm="apparmor_parser"
audit: type=1400 audit(1621733221.334:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1390 comm="apparmor_parser"
audit: type=1400 audit(1621733221.346:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1384 comm="apparmor_parser"
audit: type=1400 audit(1621733221.366:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=1400 comm="apparmor_parser"
audit: type=1400 audit(1621733221.458:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1398 comm="apparmor_parser"
audit: type=1400 audit(1621733221.546:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1389 comm="apparmor_parser"
audit: type=1400 audit(1621733221.546:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1387 comm="apparmor_parser"
audit: type=1400 audit(1621733221.546:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1385 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
NET: Registered protocol family 38
kauditd_printk_skb: 97 callbacks suppressed
audit: type=1400 audit(1621733229.742:109): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1586 comm="cups-browsed" capability=23 capname="sys_nice"
aufs 5.x-rcN-20200622
aufs aufs_fill_super:918:mount[1765]: no arg
overlayfs: missing 'lowerdir'
ACPI: \: failed to evaluate _DSM (0x1001)
wlo1: authenticate with 34:b9:a3:11:2d:e0
wlo1: send auth to 34:b9:a3:11:2d:e0 (try 1/3)
wlo1: authenticated
wlo1: associate with 34:b9:a3:11:2d:e0 (try 1/3)
wlo1: RX AssocResp from 34:b9:a3:11:2d:e0 (capab=0x1411 status=0 aid=4)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 34:b9:a3:11:2d:e0
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2693760828 Hz
vboxdrv: Successfully loaded version 6.1.16_Ubuntu (interface 0x00300000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
audit: type=1400 audit(1621733262.503:110): apparmor="DENIED" operation="ptrace" profile="snap.docker.dockerd" pid=2283 comm="ps" requested_mask="read" denied_mask="read" peer="/usr/sbin/cupsd"
audit: type=1400 audit(1621733262.503:111): apparmor="DENIED" operation="ptrace" profile="snap.docker.dockerd" pid=2283 comm="ps" requested_mask="read" denied_mask="read" peer="/usr/sbin/cups-browsed"
audit: type=1400 audit(1621733262.503:112): apparmor="DENIED" operation="ptrace" profile="snap.docker.dockerd" pid=2283 comm="ps" requested_mask="read" denied_mask="read" peer="snap.canonical-livepatch.canonical-livepatchd"
audit: type=1400 audit(1621733262.503:113): apparmor="DENIED" operation="ptrace" profile="snap.docker.dockerd" pid=2283 comm="ps" requested_mask="read" denied_mask="read" peer="system_tor"
audit: type=1400 audit(1621733262.507:114): apparmor="DENIED" operation="ptrace" profile="snap.docker.dockerd" pid=2283 comm="ps" requested_mask="read" denied_mask="read" peer="libvirtd"
audit: type=1400 audit(1621733262.599:115): apparmor="STATUS" operation="profile_load" profile="snap.docker.dockerd" name="docker-default" pid=2303 comm="apparmor_parser"
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
bpfilter: Loaded bpfilter_umh pid 2371
Started bpfilter
ACPI: \_SB_.PCI0.PEGP.DGFX: failed to evaluate _DSM
Initializing XFRM netlink socket
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
nouveau 0000:01:00.0: Enabling HDA controller
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
ACPI: \_SB_.PCI0.PEGP.DGFX: failed to evaluate _DSM
nouveau 0000:01:00.0: Enabling HDA controller
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
process 'var-lib-docker/tmp/qemu-check147294973/check' started with executable stack
br0: renamed from ov-001000-zns5z
vxlan0: renamed from vx-001000-zns5z
br0: port 1(vxlan0) entered blocking state
br0: port 1(vxlan0) entered disabled state
device vxlan0 entered promiscuous mode
br0: port 1(vxlan0) entered blocking state
br0: port 1(vxlan0) entered forwarding state
veth0: renamed from veth6cf0b71
br0: port 2(veth0) entered blocking state
br0: port 2(veth0) entered disabled state
device veth0 entered promiscuous mode
br0: port 2(veth0) entered blocking state
br0: port 2(veth0) entered forwarding state
eth0: renamed from vethfd74ca8
docker_gwbridge: port 1(veth1da7233) entered blocking state
docker_gwbridge: port 1(veth1da7233) entered disabled state
device veth1da7233 entered promiscuous mode
docker_gwbridge: port 1(veth1da7233) entered blocking state
docker_gwbridge: port 1(veth1da7233) entered forwarding state
docker_gwbridge: port 1(veth1da7233) entered disabled state
eth1: renamed from veth4f2378f
IPv6: ADDRCONF(NETDEV_CHANGE): veth1da7233: link becomes ready
docker_gwbridge: port 1(veth1da7233) entered blocking state
docker_gwbridge: port 1(veth1da7233) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): docker_gwbridge: link becomes ready
ACPI: \_SB_.PCI0.PEGP.DGFX: failed to evaluate _DSM
rfkill: input handler disabled
nouveau 0000:01:00.0: Enabling HDA controller
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
ACPI: \_SB_.PCI0.PEGP.DGFX: failed to evaluate _DSM
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
nouveau 0000:01:00.0: Enabling HDA controller
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
rfkill: input handler enabled
ACPI: \_SB_.PCI0.PEGP.DGFX: failed to evaluate _DSM
nouveau 0000:01:00.0: Enabling HDA controller
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
rfkill: input handler disabled
ACPI: \_SB_.PCI0.PEGP.DGFX: failed to evaluate _DSM
audit: type=1400 audit(1621733328.133:116): apparmor="DENIED" operation="capable" profile="/snap/snapd/11841/usr/lib/snapd/snap-confine" pid=4321 comm="snap-confine" capability=4 capname="fsetid"
nouveau 0000:01:00.0: Enabling HDA controller
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
ACPI: \_SB_.PCI0.PEGP.DGFX: failed to evaluate _DSM
audit: type=1326 audit(1621733339.340:117): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=4321 comm="snap-store" exe="/snap/snap-store/518/usr/bin/snap-store" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7f19b91c7639 code=0x50000
audit: type=1107 audit(1621733340.716:118): pid=1497 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/NetworkManager" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.19" pid=4321 label="snap.snap-store.ubuntu-software" peer_pid=1498 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
audit: type=1107 audit(1621733346.867:119): pid=1497 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.9" pid=4321 label="snap.snap-store.ubuntu-software" peer_pid=1524 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
audit: type=1107 audit(1621733346.867:120): pid=1497 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.9" pid=4321 label="snap.snap-store.ubuntu-software" peer_pid=1524 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
audit: type=1400 audit(1621733355.396:121): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=4321 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1621733355.424:122): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=4321 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1326 audit(1621733355.849:123): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=4321 comm="snap-store" exe="/snap/snap-store/518/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7f19b91bd4e7 code=0x50000
audit: type=1107 audit(1621733356.505:124): pid=1497 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.9" pid=4321 label="snap.snap-store.ubuntu-software" peer_pid=1524 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
audit: type=1107 audit(1621733356.505:125): pid=1497 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.9" pid=4321 label="snap.snap-store.ubuntu-software" peer_pid=1524 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
audit: type=1400 audit(1621733359.389:126): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/etc/PackageKit/Vendor.conf" pid=4321 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
nouveau 0000:01:00.0: Enabling HDA controller
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
ACPI: \_SB_.PCI0.PEGP.DGFX: failed to evaluate _DSM
audit: type=1400 audit(1621733425.147:127): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=4321 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1621733425.175:128): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=4321 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1326 audit(1621733425.615:129): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=4321 comm="snap-store" exe="/snap/snap-store/518/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7f19b91bd4e7 code=0x50000
nouveau 0000:01:00.0: Enabling HDA controller
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
ACPI: \_SB_.PCI0.PEGP.DGFX: failed to evaluate _DSM
wlo1: deauthenticating from 34:b9:a3:11:2d:e0 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
Filesystems sync: 0.680 seconds
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
printk: Suspending console(s) (use no_console_suspend to debug)
sd 5:0:0:0: [sdb] Synchronizing SCSI cache
sd 5:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Synchronizing SCSI cache
parport_pc 00:05: disabled
e1000e: EEE TX LPI TIMER: 00000011
sd 0:0:0:0: [sda] Stopping disk
nouveau 0000:01:00.0: Enabling HDA controller
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
IRQ 39: no longer affine to CPU1
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
IRQ 17: no longer affine to CPU3
IRQ 18: no longer affine to CPU3
IRQ 38: no longer affine to CPU3
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
IRQ 16: no longer affine to CPU5
smpboot: CPU 5 is now offline
IRQ 32: no longer affine to CPU6
smpboot: CPU 6 is now offline
IRQ 37: no longer affine to CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
smpboot: Scheduler frequency invariance went wobbly, disabling!
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 5:0:0:0: [sdb] Starting disk
usb 3-7: reset high-speed USB device number 2 using xhci_hcd
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata6.00: NCQ Send/Recv Log not supported
ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata6.00: NCQ Send/Recv Log not supported
ata6.00: configured for UDMA/133
usb 3-12: reset full-speed USB device number 4 using xhci_hcd
tpm tpm0: tpm_try_transmit: send(): error -5
parport_pc 00:05: activated
acpi LNXPOWER:01: Turning OFF
OOM killer enabled.
Restarting tasks ...
acpi PNP0501:00: Still not present
done.
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
PM: suspend exit
Bluetooth: hci0: unexpected event for opcode 0xfc2f
Bluetooth: hci0: Intel BT fw patch 0x57 completed & activated
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
psmouse serio3: synaptics: queried max coordinates: x [..5660], y [..4730]
psmouse serio3: synaptics: queried min coordinates: x [1324..], y [1248..]
e1000e 0000:00:19.0 enp0s25: NIC Link is Down
ACPI: \: failed to evaluate _DSM (0x1001)
wlo1: authenticate with 34:b9:a3:11:2d:e0
wlo1: send auth to 34:b9:a3:11:2d:e0 (try 1/3)
wlo1: authenticated
wlo1: associate with 34:b9:a3:11:2d:e0 (try 1/3)
wlo1: RX AssocResp from 34:b9:a3:11:2d:e0 (capab=0x1411 status=0 aid=4)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
ACPI: \_SB_.PCI0.PEGP.DGFX: failed to evaluate _DSM
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 34:b9:a3:11:2d:e0
nouveau 0000:01:00.0: Enabling HDA controller
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
ACPI: \_SB_.PCI0.PEGP.DGFX: failed to evaluate _DSM
nouveau 0000:01:00.0: Enabling HDA controller
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
ACPI: \_SB_.PCI0.PEGP.DGFX: failed to evaluate _DSM
nouveau 0000:01:00.0: Enabling HDA controller
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
ACPI: \_SB_.PCI0.PEGP.DGFX: failed to evaluate _DSM
nouveau 0000:01:00.0: Enabling HDA controller
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
ACPI: \_SB_.PCI0.PEGP.DGFX: failed to evaluate _DSM
nouveau 0000:01:00.0: Enabling HDA controller
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
ACPI: \_SB_.PCI0.PEGP.DGFX: failed to evaluate _DSM
wlo1: deauthenticating from 34:b9:a3:11:2d:e0 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: suspend entry (deep)
Filesystems sync: 7.668 seconds
Freezing user space processes ... (elapsed 0.281 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
printk: Suspending console(s) (use no_console_suspend to debug)
sd 5:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 5:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
parport_pc 00:05: disabled
e1000e: EEE TX LPI TIMER: 00000011
nouveau 0000:01:00.0: Enabling HDA controller
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
IRQ 38: no longer affine to CPU1
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
IRQ 16: no longer affine to CPU3
IRQ 31: no longer affine to CPU3
IRQ 39: no longer affine to CPU3
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
IRQ 17: no longer affine to CPU5
smpboot: CPU 5 is now offline
IRQ 32: no longer affine to CPU6
smpboot: CPU 6 is now offline
IRQ 37: no longer affine to CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
sd 5:0:0:0: [sdb] Starting disk
usb 3-12: reset full-speed USB device number 4 using xhci_hcd
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata6.00: NCQ Send/Recv Log not supported
ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata6.00: NCQ Send/Recv Log not supported
ata6.00: configured for UDMA/133
usb 3-7: reset high-speed USB device number 2 using xhci_hcd
tpm tpm0: tpm_try_transmit: send(): error -5
parport_pc 00:05: activated
acpi LNXPOWER:01: Turning OFF
OOM killer enabled.
Restarting tasks ...
acpi PNP0501:00: Still not present
done.
PM: suspend exit
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
Bluetooth: hci0: unexpected event for opcode 0xfc2f
Bluetooth: hci0: Intel BT fw patch 0x57 completed & activated
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
psmouse serio3: synaptics: queried max coordinates: x [..5660], y [..4730]
psmouse serio3: synaptics: queried min coordinates: x [1324..], y [1248..]
e1000e 0000:00:19.0 enp0s25: NIC Link is Down
ACPI: \: failed to evaluate _DSM (0x1001)
ACPI: \_SB_.PCI0.PEGP.DGFX: failed to evaluate _DSM
wlo1: authenticate with 34:b9:a3:11:2d:e0
wlo1: send auth to 34:b9:a3:11:2d:e0 (try 1/3)
wlo1: authenticated
wlo1: associate with 34:b9:a3:11:2d:e0 (try 1/3)
wlo1: RX AssocResp from 34:b9:a3:11:2d:e0 (capab=0x1411 status=0 aid=5)
wlo1: associated
wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 34:b9:a3:11:2d:e0
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
nouveau 0000:01:00.0: Enabling HDA controller
nouveau 0000:01:00.0: devinit: 0x000069c3[0]: script needs OR link