dmesg - postmark
Linux version 4.19.0-91.77.18.uelc20.x86_64 (mockbuild@c94f1ee608ef400f8920e1d947e04e3c) (gcc version 4.8.5 20150623 (UOS 4.8.5-39) (GCC)) #1 SMP Thu Mar 4 09:11:24 CST 2021
Zhaoxin Linux Patch Version is V3.0.2
With Zhaoxin Shanghai CPU patch V2.0.0
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cefd3fff] usable
BIOS-e820: [mem 0x00000000cefd4000-0x00000000cf122fff] reserved
BIOS-e820: [mem 0x00000000cf123000-0x00000000cf6edfff] ACPI NVS
BIOS-e820: [mem 0x00000000cf6ee000-0x00000000cf6fdfff] ACPI data
BIOS-e820: [mem 0x00000000cf6fe000-0x00000000cfafefff] usable
BIOS-e820: [mem 0x00000000cfaff000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000fdffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec08000-0x00000000fec09fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000082fefffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Shanghai Zhaoxin Semiconductor Co., Ltd. 1/1, BIOS HX002EP0_07_R4900_R_200519 05/19/2020
tsc: Fast TSC calibration using PIT
tsc: Detected 2694.332 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x82ff00 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00D0000000 mask FFF0000000 uncachable
1 base 00E0000000 mask FFE0000000 uncachable
2 base 00CFC00000 mask FFFFC00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0xcfaff max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd4e0-0x000fd4ef]
Using GB pages for direct mapping
BRK [0x5f6e01000, 0x5f6e01fff] PGTABLE
BRK [0x5f6e02000, 0x5f6e02fff] PGTABLE
BRK [0x5f6e03000, 0x5f6e03fff] PGTABLE
BRK [0x5f6e04000, 0x5f6e04fff] PGTABLE
BRK [0x5f6e05000, 0x5f6e05fff] PGTABLE
BRK [0x5f6e06000, 0x5f6e06fff] PGTABLE
BRK [0x5f6e07000, 0x5f6e07fff] PGTABLE
BRK [0x5f6e08000, 0x5f6e08fff] PGTABLE
BRK [0x5f6e09000, 0x5f6e09fff] PGTABLE
BRK [0x5f6e0a000, 0x5f6e0afff] PGTABLE
RAMDISK: [mem 0x3483b000-0x36415fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F2520 000024 (v02 _BYO_ )
ACPI: XSDT 0x00000000CF6FC0E8 00006C (v01 _BYO_ EDK2 00000002 01000013)
ACPI: FACP 0x00000000CF6F9000 00010C (v05 _BYO_ EDK2 00000002 20202020)
ACPI: DSDT 0x00000000CF6F1000 004636 (v02 _BYO_ ZX_PLAT 00000001 INTL 20121018)
ACPI: FACS 0x00000000CF6E8000 000040
ACPI: FACS 0x00000000CF6E8000 000040
ACPI: UEFI 0x00000000CF6EA000 000042 (v01 _BYO_ EDK2 00000002 01000013)
ACPI: SRAT 0x00000000CF6FB000 0001A8 (v03 _BYO_ EDK2 00000002 20202020)
ACPI: SLIT 0x00000000CF6FA000 000030 (v01 _BYO_ EDK2 00000002 20202020)
ACPI: HPET 0x00000000CF6F8000 000038 (v01 _BYO_ EDK2 00000002 20202020)
ACPI: APIC 0x00000000CF6F7000 00011E (v03 _BYO_ EDK2 00000002 20202020)
ACPI: MCFG 0x00000000CF6F6000 00003C (v01 _BYO_ EDK2 00000002 20202020)
ACPI: FPDT 0x00000000CF6F0000 000044 (v01 _BYO_ EDK2 00000002 01000013)
ACPI: BGRT 0x00000000CF6EF000 000038 (v01 _BYO_ EDK2 00000002 01000013)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 1 -> APIC 0x08 -> Node 1
SRAT: PXM 1 -> APIC 0x09 -> Node 1
SRAT: PXM 1 -> APIC 0x0a -> Node 1
SRAT: PXM 1 -> APIC 0x0b -> Node 1
SRAT: PXM 1 -> APIC 0x0c -> Node 1
SRAT: PXM 1 -> APIC 0x0d -> Node 1
SRAT: PXM 1 -> APIC 0x0e -> Node 1
SRAT: PXM 1 -> APIC 0x0f -> Node 1
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0xcfffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x42fffffff]
ACPI: SRAT: Node 1 PXM 1 [mem 0x430000000-0x82fefffff]
NUMA: Initialized distance table, cnt=2
NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x42fffffff] -> [mem 0x00000000-0x42fffffff]
NODE_DATA(0) allocated [mem 0x42ffd6000-0x42fffffff]
NODE_DATA(1) allocated [mem 0x82fed5000-0x82fefefff]
crashkernel: memory value expected
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000082fefffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x0000000000100000-0x00000000cefd3fff]
node 0: [mem 0x00000000cf6fe000-0x00000000cfafefff]
node 0: [mem 0x0000000100000000-0x000000042fffffff]
node 1: [mem 0x0000000430000000-0x000000082fefffff]
Zeroed struct page in unavailable ranges: 3472 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000042fffffff]
On node 0 totalpages: 4191088
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 13200 pages used for memmap
DMA32 zone: 844757 pages, LIFO batch:63
Normal zone: 52224 pages used for memmap
Normal zone: 3342336 pages, LIFO batch:63
Initmem setup node 1 [mem 0x0000000430000000-0x000000082fefffff]
On node 1 totalpages: 4194048
Normal zone: 65532 pages used for memmap
Normal zone: 4194048 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 3, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 3, address 0xfec01000, GSI 24-47
IOAPIC[2]: apic_id 11, version 3, address 0xfec08000, GSI 48-71
IOAPIC[3]: apic_id 12, version 3, address 0xfec09000, GSI 72-95
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 3 global_irq 3 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 4 global_irq 4 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 7 global_irq 7 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ3 used by override.
ACPI: IRQ4 used by override.
ACPI: IRQ7 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x1d178201 base: 0xfeb40000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcefd4000-0xcf122fff]
PM: Registered nosave memory: [mem 0xcf123000-0xcf6edfff]
PM: Registered nosave memory: [mem 0xcf6ee000-0xcf6fdfff]
PM: Registered nosave memory: [mem 0xcfaff000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec07fff]
PM: Registered nosave memory: [mem 0xfec08000-0xfec09fff]
PM: Registered nosave memory: [mem 0xfec0a000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xffffffff]
[mem 0xd0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
random: get_random_bytes called from start_kernel+0x99/0x598 with crng_init=0
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:2
percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u262144
pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [1] 08 09 10 11 12 13 14 15
Built 2 zonelists, mobility grouping on. Total pages: 8254095
Policy zone: Normal
Memory: 3562976K/33540544K available (12300K kernel code, 2492K rwdata, 3712K rodata, 2376K init, 6040K bss, 655016K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=2
ftrace: allocating 35787 entries in 140 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 1776, preallocated irqs: 16
Console: colour VGA+ 80x25
console [tty0] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
ACPI: Core revision 20180810
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d65423474, max_idle_ns: 440795209291 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5388.66 BogoMIPS (lpj=10777328)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
With Zhaoxin Shanghai CPU patch V2.0.0
Got Zhaoxin CPU topology from cpuid B leaf, 4 leaf patch V1.0.0
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
Zhaoxin MCE driver patch V1.0.2
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Freeing SMP alternatives memory: 32K
TSC deadline timer enabled
smpboot: CPU0: Centaur ZHAOXIN KaiSheng KH-37800D@2.7GHz (family: 0x7, model: 0x3b, stepping: 0xe)
Performance Events: no PMU driver, software events only.
rcu: Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
With Zhaoxin Shanghai CPU patch V2.0.0
Got Zhaoxin CPU topology from cpuid B leaf, 4 leaf patch V1.0.0
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#2
With Zhaoxin Shanghai CPU patch V2.0.0
Got Zhaoxin CPU topology from cpuid B leaf, 4 leaf patch V1.0.0
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#3
With Zhaoxin Shanghai CPU patch V2.0.0
Got Zhaoxin CPU topology from cpuid B leaf, 4 leaf patch V1.0.0
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#4
With Zhaoxin Shanghai CPU patch V2.0.0
Got Zhaoxin CPU topology from cpuid B leaf, 4 leaf patch V1.0.0
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#5
With Zhaoxin Shanghai CPU patch V2.0.0
Got Zhaoxin CPU topology from cpuid B leaf, 4 leaf patch V1.0.0
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#6
With Zhaoxin Shanghai CPU patch V2.0.0
Got Zhaoxin CPU topology from cpuid B leaf, 4 leaf patch V1.0.0
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#7
With Zhaoxin Shanghai CPU patch V2.0.0
Got Zhaoxin CPU topology from cpuid B leaf, 4 leaf patch V1.0.0
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
.... node #1, CPUs: #8
With Zhaoxin Shanghai CPU patch V2.0.0
Got Zhaoxin CPU topology from cpuid B leaf, 4 leaf patch V1.0.0
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#9
With Zhaoxin Shanghai CPU patch V2.0.0
Got Zhaoxin CPU topology from cpuid B leaf, 4 leaf patch V1.0.0
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#10
With Zhaoxin Shanghai CPU patch V2.0.0
Got Zhaoxin CPU topology from cpuid B leaf, 4 leaf patch V1.0.0
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#11
With Zhaoxin Shanghai CPU patch V2.0.0
Got Zhaoxin CPU topology from cpuid B leaf, 4 leaf patch V1.0.0
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#12
With Zhaoxin Shanghai CPU patch V2.0.0
Got Zhaoxin CPU topology from cpuid B leaf, 4 leaf patch V1.0.0
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#13
With Zhaoxin Shanghai CPU patch V2.0.0
Got Zhaoxin CPU topology from cpuid B leaf, 4 leaf patch V1.0.0
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#14
With Zhaoxin Shanghai CPU patch V2.0.0
Got Zhaoxin CPU topology from cpuid B leaf, 4 leaf patch V1.0.0
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#15
With Zhaoxin Shanghai CPU patch V2.0.0
Got Zhaoxin CPU topology from cpuid B leaf, 4 leaf patch V1.0.0
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
smp: Brought up 2 nodes, 16 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 16 processors activated (86267.55 BogoMIPS)
node 0 initialised, 3243618 pages in 116ms
node 1 initialised, 4087020 pages in 152ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xcf123000-0xcf6edfff] (6074368 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1617094667.488:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 1 GPEs in block 10 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0x7fff window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe14fffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfcffffff window]
pci_bus 0000:00: root bus resource [bus 00-7f]
pci 0000:00:00.0: [1d17:1003] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.1: [1d17:31b0] type 00 class 0x060000
pci 0000:00:00.2: [1d17:31b1] type 00 class 0x060000
pci 0000:00:00.3: [1d17:31b2] type 00 class 0x060000
pci 0000:00:00.4: [1d17:31b3] type 00 class 0x060000
pci 0000:00:00.5: [1d17:31b4] type 00 class 0x060000
pci 0000:00:00.5: PME# supported from D0 D3hot D3cold
pci 0000:00:00.6: [1d17:31b5] type 00 class 0x060000
pci 0000:00:03.0: [1d17:0717] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [1d17:071d] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.1: [1d17:071e] type 01 class 0x060400
pci 0000:00:05.1: PME# supported from D0 D3hot D3cold
pci 0000:00:0f.0: [1d17:9083] type 00 class 0x010601
pci 0000:00:0f.0: reg 0x18: [mem 0xfc408000-0xfc40803f]
pci 0000:00:0f.0: reg 0x1c: [mem 0xfc409000-0xfc40900f]
pci 0000:00:0f.0: reg 0x20: [io 0x7040-0x705f]
pci 0000:00:0f.0: reg 0x24: [mem 0xfc404000-0xfc405fff]
pci 0000:00:0f.0: PME# supported from D3hot
pci 0000:00:10.0: [1d17:3038] type 00 class 0x0c0300
pci 0000:00:10.0: reg 0x20: [io 0x7020-0x703f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: [1d17:3038] type 00 class 0x0c0300
pci 0000:00:10.1: reg 0x20: [io 0x7000-0x701f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.7: [1d17:3104] type 00 class 0x0c0320
pci 0000:00:10.7: reg 0x10: [mem 0xfc407000-0xfc4070ff]
pci 0000:00:10.7: supports D1 D2
pci 0000:00:10.7: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:11.0: [1d17:1001] type 00 class 0x060100
pci 0000:00:11.7: [1d17:31b7] type 00 class 0x060000
pci 0000:00:12.0: [1d17:9204] type 00 class 0x0c0330
pci 0000:00:12.0: reg 0x10: [mem 0xfc406000-0xfc406fff 64bit]
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: [1d17:3288] type 00 class 0x040300
pci 0000:00:14.0: reg 0x10: [mem 0xfc400000-0xfc403fff 64bit]
pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [10b5:8724] type 01 class 0x060400
pci 0000:01:00.0: reg 0x10: [mem 0xfc300000-0xfc33ffff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 01-08]
pci 0000:00:03.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:03.0: bridge window [mem 0xfc100000-0xfc3fffff]
pci 0000:02:01.0: [10b5:8724] type 01 class 0x060400
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:02.0: [10b5:8724] type 01 class 0x060400
pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
pci 0000:02:03.0: [10b5:8724] type 01 class 0x060400
pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
pci 0000:02:08.0: [10b5:8724] type 01 class 0x060400
pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
pci 0000:02:09.0: [10b5:8724] type 01 class 0x060400
pci 0000:02:09.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-08]
pci 0000:01:00.0: bridge window [io 0x6000-0x6fff]
pci 0000:01:00.0: bridge window [mem 0xfc100000-0xfc2fffff]
pci 0000:03:00.0: [8086:1521] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfc160000-0xfc17ffff]
pci 0000:03:00.0: reg 0x18: [io 0x6060-0x607f]
pci 0000:03:00.0: reg 0x1c: [mem 0xfc28c000-0xfc28ffff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: reg 0x184: [mem 0xfc26c000-0xfc26ffff]
pci 0000:03:00.0: VF(n) BAR0 space: [mem 0xfc26c000-0xfc28bfff] (contains BAR0 for 8 VFs)
pci 0000:03:00.0: reg 0x190: [mem 0xfc24c000-0xfc24ffff]
pci 0000:03:00.0: VF(n) BAR3 space: [mem 0xfc24c000-0xfc26bfff] (contains BAR3 for 8 VFs)
pci 0000:03:00.1: [8086:1521] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xfc140000-0xfc15ffff]
pci 0000:03:00.1: reg 0x18: [io 0x6040-0x605f]
pci 0000:03:00.1: reg 0x1c: [mem 0xfc248000-0xfc24bfff]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: reg 0x184: [mem 0xfc228000-0xfc22bfff]
pci 0000:03:00.1: VF(n) BAR0 space: [mem 0xfc228000-0xfc247fff] (contains BAR0 for 8 VFs)
pci 0000:03:00.1: reg 0x190: [mem 0xfc208000-0xfc20bfff]
pci 0000:03:00.1: VF(n) BAR3 space: [mem 0xfc208000-0xfc227fff] (contains BAR3 for 8 VFs)
pci 0000:03:00.2: [8086:1521] type 00 class 0x020000
pci 0000:03:00.2: reg 0x10: [mem 0xfc120000-0xfc13ffff]
pci 0000:03:00.2: reg 0x18: [io 0x6020-0x603f]
pci 0000:03:00.2: reg 0x1c: [mem 0xfc204000-0xfc207fff]
pci 0000:03:00.2: PME# supported from D0 D3hot D3cold
pci 0000:03:00.2: reg 0x184: [mem 0xfc1e4000-0xfc1e7fff]
pci 0000:03:00.2: VF(n) BAR0 space: [mem 0xfc1e4000-0xfc203fff] (contains BAR0 for 8 VFs)
pci 0000:03:00.2: reg 0x190: [mem 0xfc1c4000-0xfc1c7fff]
pci 0000:03:00.2: VF(n) BAR3 space: [mem 0xfc1c4000-0xfc1e3fff] (contains BAR3 for 8 VFs)
pci 0000:03:00.3: [8086:1521] type 00 class 0x020000
pci 0000:03:00.3: reg 0x10: [mem 0xfc100000-0xfc11ffff]
pci 0000:03:00.3: reg 0x18: [io 0x6000-0x601f]
pci 0000:03:00.3: reg 0x1c: [mem 0xfc1c0000-0xfc1c3fff]
pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
pci 0000:03:00.3: reg 0x184: [mem 0xfc1a0000-0xfc1a3fff]
pci 0000:03:00.3: VF(n) BAR0 space: [mem 0xfc1a0000-0xfc1bffff] (contains BAR0 for 8 VFs)
pci 0000:03:00.3: reg 0x190: [mem 0xfc180000-0xfc183fff]
pci 0000:03:00.3: VF(n) BAR3 space: [mem 0xfc180000-0xfc19ffff] (contains BAR3 for 8 VFs)
pci 0000:02:01.0: PCI bridge to [bus 03-04]
pci 0000:02:01.0: bridge window [io 0x6000-0x6fff]
pci 0000:02:01.0: bridge window [mem 0xfc100000-0xfc2fffff]
pci 0000:02:02.0: PCI bridge to [bus 05]
pci 0000:02:03.0: PCI bridge to [bus 06]
pci 0000:02:08.0: PCI bridge to [bus 07]
pci 0000:02:09.0: PCI bridge to [bus 08]
pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:09:00.0: enabling Extended Tags
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 09-0a]
pci 0000:00:05.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:05.0: bridge window [mem 0xfb000000-0xfc0fffff]
pci_bus 0000:0a: extended config space not accessible
pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:0a:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
pci 0000:0a:00.0: reg 0x14: [mem 0xfc000000-0xfc01ffff]
pci 0000:0a:00.0: reg 0x18: [io 0x5000-0x507f]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:09:00.0: bridge window [io 0x5000-0x5fff]
pci 0000:09:00.0: bridge window [mem 0xfb000000-0xfc0fffff]
pci 0000:00:05.1: PCI bridge to [bus 0b]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:01: _OSC: platform does not support [SHPCHotplug AER LTR]
acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [io 0x8000-0x8fff window]
pci_bus 0000:80: root bus resource [io 0x9000-0xffff window]
pci_bus 0000:80: root bus resource [mem 0xd0000000-0xdfffffff window]
pci_bus 0000:80: root bus resource [bus 80-ff]
pci 0000:80:00.0: [1d17:1003] type 00 class 0x060000
pci 0000:80:00.0: PME# supported from D0 D3hot D3cold
pci 0000:80:00.1: [1d17:31b0] type 00 class 0x060000
pci 0000:80:00.2: [1d17:31b1] type 00 class 0x060000
pci 0000:80:00.3: [1d17:31b2] type 00 class 0x060000
pci 0000:80:00.4: [1d17:31b3] type 00 class 0x060000
pci 0000:80:00.5: [1d17:31b4] type 00 class 0x060000
pci 0000:80:00.5: PME# supported from D0 D3hot D3cold
pci 0000:80:00.6: [1d17:31b5] type 00 class 0x060000
pci 0000:80:03.0: [1d17:0717] type 01 class 0x060400
pci 0000:80:03.0: PME# supported from D0 D3hot D3cold
pci 0000:80:10.0: [1d17:3038] type 00 class 0x0c0300
pci 0000:80:10.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:80:10.0: supports D1 D2
pci 0000:80:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:10.1: [1d17:3038] type 00 class 0x0c0300
pci 0000:80:10.1: reg 0x20: [io 0xf000-0xf01f]
pci 0000:80:10.1: supports D1 D2
pci 0000:80:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:10.7: [1d17:3104] type 00 class 0x0c0320
pci 0000:80:10.7: reg 0x10: [mem 0xd0101000-0xd01010ff]
pci 0000:80:10.7: supports D1 D2
pci 0000:80:10.7: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:11.0: [1d17:1001] type 00 class 0x060100
pci 0000:80:11.7: [1d17:31b7] type 00 class 0x060000
pci 0000:80:12.0: [1d17:9204] type 00 class 0x0c0330
pci 0000:80:12.0: reg 0x10: [mem 0xd0100000-0xd0100fff 64bit]
pci 0000:80:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:81:00.0: [10b5:8724] type 01 class 0x060400
pci 0000:81:00.0: reg 0x10: [mem 0xd0000000-0xd003ffff]
pci 0000:81:00.0: PME# supported from D0 D3hot D3cold
pci 0000:80:03.0: PCI bridge to [bus 81-87]
pci 0000:80:03.0: bridge window [mem 0xd0000000-0xd00fffff]
pci 0000:82:01.0: [10b5:8724] type 01 class 0x060400
pci 0000:82:01.0: PME# supported from D0 D3hot D3cold
pci 0000:82:02.0: [10b5:8724] type 01 class 0x060400
pci 0000:82:02.0: PME# supported from D0 D3hot D3cold
pci 0000:82:03.0: [10b5:8724] type 01 class 0x060400
pci 0000:82:03.0: PME# supported from D0 D3hot D3cold
pci 0000:82:08.0: [10b5:8724] type 01 class 0x060400
pci 0000:82:08.0: PME# supported from D0 D3hot D3cold
pci 0000:82:09.0: [10b5:8724] type 01 class 0x060400
pci 0000:82:09.0: PME# supported from D0 D3hot D3cold
pci 0000:81:00.0: PCI bridge to [bus 82-87]
pci 0000:82:01.0: PCI bridge to [bus 83]
pci 0000:82:02.0: PCI bridge to [bus 84]
pci 0000:82:03.0: PCI bridge to [bus 85]
pci 0000:82:08.0: PCI bridge to [bus 86]
pci 0000:82:09.0: PCI bridge to [bus 87]
pci_bus 0000:80: on NUMA node 1
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
pci 0000:0a:00.0: vgaarb: setting as boot VGA device
pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:0a:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcefd4000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcfaff000-0xcfffffff]
e820: reserve RAM buffer [mem 0x82ff00000-0x82fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfeb40000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfeb7ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb41000-0xfeb41fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0800-0x08ff window] has been reserved
system 00:04: [io 0x0400-0x041f] has been reserved
system 00:04: [mem 0xff800000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfeb80000-0xfebfffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:07: [io 0x8800-0x88ff window] has been reserved
system 00:07: [io 0x8400-0x841f] has been reserved
system 00:07: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:02:01.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-04] add_size 200000 add_align 100000
pci 0000:02:09.0: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
pci 0000:02:09.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
pci 0000:02:09.0: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000
pci 0000:01:00.0: bridge window [mem 0x00100000-0x002fffff 64bit pref] to [bus 02-08] add_size 400000 add_align 100000
pci 0000:00:03.0: bridge window [mem 0x00100000-0x002fffff 64bit pref] to [bus 01-08] add_size 400000 add_align 100000
pci 0000:00:03.0: BAR 15: assigned [mem 0xf0000000-0xf05fffff 64bit pref]
pci 0000:01:00.0: BAR 15: assigned [mem 0xf0000000-0xf05fffff 64bit pref]
pci 0000:02:01.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:02:09.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:02:09.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:02:09.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:02:09.0: BAR 13: no space for [io size 0x1000]
pci 0000:02:09.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:02:09.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:02:09.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:02:09.0: BAR 13: no space for [io size 0x1000]
pci 0000:02:09.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:02:01.0: PCI bridge to [bus 03-04]
pci 0000:02:01.0: bridge window [io 0x6000-0x6fff]
pci 0000:02:01.0: bridge window [mem 0xfc100000-0xfc2fffff]
pci 0000:02:01.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:02:02.0: PCI bridge to [bus 05]
pci 0000:02:03.0: PCI bridge to [bus 06]
pci 0000:02:08.0: PCI bridge to [bus 07]
pci 0000:02:09.0: PCI bridge to [bus 08]
pci 0000:02:09.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-08]
pci 0000:01:00.0: bridge window [io 0x6000-0x6fff]
pci 0000:01:00.0: bridge window [mem 0xfc100000-0xfc2fffff]
pci 0000:01:00.0: bridge window [mem 0xf0000000-0xf05fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 01-08]
pci 0000:00:03.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:03.0: bridge window [mem 0xfc100000-0xfc3fffff]
pci 0000:00:03.0: bridge window [mem 0xf0000000-0xf05fffff 64bit pref]
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:09:00.0: bridge window [io 0x5000-0x5fff]
pci 0000:09:00.0: bridge window [mem 0xfb000000-0xfc0fffff]
pci 0000:00:05.0: PCI bridge to [bus 09-0a]
pci 0000:00:05.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:05.0: bridge window [mem 0xfb000000-0xfc0fffff]
pci 0000:00:05.1: PCI bridge to [bus 0b]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x0d00-0x7fff window]
pci_bus 0000:00: resource 7 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xe14fffff window]
pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfcffffff window]
pci_bus 0000:01: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:01: resource 1 [mem 0xfc100000-0xfc3fffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf05fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc2fffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf05fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:03: resource 1 [mem 0xfc100000-0xfc2fffff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
pci_bus 0000:08: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:09: resource 1 [mem 0xfb000000-0xfc0fffff]
pci_bus 0000:0a: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:0a: resource 1 [mem 0xfb000000-0xfc0fffff]
pci 0000:82:01.0: bridge window [io 0x1000-0x0fff] to [bus 83] add_size 1000
pci 0000:82:01.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 83] add_size 200000 add_align 100000
pci 0000:82:01.0: bridge window [mem 0x00100000-0x000fffff] to [bus 83] add_size 200000 add_align 100000
pci 0000:82:09.0: bridge window [io 0x1000-0x0fff] to [bus 87] add_size 1000
pci 0000:82:09.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 87] add_size 200000 add_align 100000
pci 0000:82:09.0: bridge window [mem 0x00100000-0x000fffff] to [bus 87] add_size 200000 add_align 100000
pci 0000:81:00.0: bridge window [io 0x1000-0x0fff] to [bus 82-87] add_size 2000
pci 0000:81:00.0: bridge window [mem 0x00100000-0x002fffff 64bit pref] to [bus 82-87] add_size 400000 add_align 100000
pci 0000:81:00.0: bridge window [mem 0x00100000-0x002fffff] to [bus 82-87] add_size 400000 add_align 100000
pci 0000:80:03.0: bridge window [io 0x1000-0x0fff] to [bus 81-87] add_size 2000
pci 0000:80:03.0: bridge window [mem 0x00100000-0x002fffff 64bit pref] to [bus 81-87] add_size 400000 add_align 100000
pci 0000:80:03.0: BAR 15: assigned [mem 0xd0200000-0xd07fffff 64bit pref]
pci 0000:80:03.0: BAR 13: assigned [io 0x9000-0xafff]
pci 0000:81:00.0: BAR 14: no space for [mem size 0x00600000]
pci 0000:81:00.0: BAR 14: failed to assign [mem size 0x00600000]
pci 0000:81:00.0: BAR 15: assigned [mem 0xd0200000-0xd07fffff 64bit pref]
pci 0000:81:00.0: BAR 13: assigned [io 0x9000-0xafff]
pci 0000:81:00.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:81:00.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:82:01.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:82:01.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:82:01.0: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
pci 0000:82:09.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:82:09.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:82:09.0: BAR 15: assigned [mem 0xd0400000-0xd05fffff 64bit pref]
pci 0000:82:01.0: BAR 13: assigned [io 0x9000-0x9fff]
pci 0000:82:09.0: BAR 13: assigned [io 0xa000-0xafff]
pci 0000:82:09.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:82:09.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:82:01.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:82:01.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:82:01.0: PCI bridge to [bus 83]
pci 0000:82:01.0: bridge window [io 0x9000-0x9fff]
pci 0000:82:01.0: bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
pci 0000:82:02.0: PCI bridge to [bus 84]
pci 0000:82:03.0: PCI bridge to [bus 85]
pci 0000:82:08.0: PCI bridge to [bus 86]
pci 0000:82:09.0: PCI bridge to [bus 87]
pci 0000:82:09.0: bridge window [io 0xa000-0xafff]
pci 0000:82:09.0: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
pci 0000:81:00.0: PCI bridge to [bus 82-87]
pci 0000:81:00.0: bridge window [io 0x9000-0xafff]
pci 0000:81:00.0: bridge window [mem 0xd0200000-0xd07fffff 64bit pref]
pci 0000:80:03.0: PCI bridge to [bus 81-87]
pci 0000:80:03.0: bridge window [io 0x9000-0xafff]
pci 0000:80:03.0: bridge window [mem 0xd0000000-0xd00fffff]
pci 0000:80:03.0: bridge window [mem 0xd0200000-0xd07fffff 64bit pref]
pci_bus 0000:80: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0000:80: resource 4 [io 0x8000-0x8fff window]
pci_bus 0000:80: resource 5 [io 0x9000-0xffff window]
pci_bus 0000:80: resource 6 [mem 0xd0000000-0xdfffffff window]
pci_bus 0000:81: resource 0 [io 0x9000-0xafff]
pci_bus 0000:81: resource 1 [mem 0xd0000000-0xd00fffff]
pci_bus 0000:81: resource 2 [mem 0xd0200000-0xd07fffff 64bit pref]
pci_bus 0000:82: resource 0 [io 0x9000-0xafff]
pci_bus 0000:82: resource 2 [mem 0xd0200000-0xd07fffff 64bit pref]
pci_bus 0000:83: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:83: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
pci_bus 0000:87: resource 0 [io 0xa000-0xafff]
pci_bus 0000:87: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 28524K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xcafd4000-0xcefd4000] (64MB)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:03.0: Signaling PME with IRQ 25
pcieport 0000:00:05.0: Signaling PME with IRQ 27
pcieport 0000:00:05.1: Signaling PME with IRQ 29
pciehp 0000:02:01.0:pcie204: Slot #1 AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surprise- Interlock- NoCompl- LLActRep+
pciehp 0000:02:09.0:pcie204: Slot #9 AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surprise- Interlock- NoCompl- LLActRep+
pcieport 0000:80:03.0: Signaling PME with IRQ 35
pciehp 0000:82:01.0:pcie204: Slot #1 AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surprise- Interlock- NoCompl- LLActRep+
pciehp 0000:82:09.0:pcie204: Slot #9 AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surprise- Interlock- NoCompl- LLActRep+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: AC Adapter [ACDP] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Non-volatile memory driver v1.3
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:10.7: EHCI Host Controller
ehci-pci 0000:00:10.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:10.7: debug port 1
ehci-pci 0000:00:10.7: irq 21, io mem 0xfc407000
ehci-pci 0000:00:10.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.19.0-91.77.18.uelc20.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:10.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:80:10.7: EHCI Host Controller
ehci-pci 0000:80:10.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:80:10.7: debug port 1
ehci-pci 0000:80:10.7: irq 41, io mem 0xd0101000
ehci-pci 0000:80:10.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.19.0-91.77.18.uelc20.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:80:10.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.0: detected 2 ports
uhci_hcd 0000:00:10.0: Adjust the UHCI Controllers bit value patch V1.0.0
uhci_hcd 0000:00:10.0: irq 20, io base 0x00007020
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.19.0-91.77.18.uelc20.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:10.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.1: detected 2 ports
uhci_hcd 0000:00:10.1: Adjust the UHCI Controllers bit value patch V1.0.0
uhci_hcd 0000:00:10.1: irq 22, io base 0x00007000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.19.0-91.77.18.uelc20.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:10.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:80:10.0: UHCI Host Controller
uhci_hcd 0000:80:10.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:80:10.0: detected 2 ports
uhci_hcd 0000:80:10.0: Adjust the UHCI Controllers bit value patch V1.0.0
uhci_hcd 0000:80:10.0: irq 42, io base 0x0000f020
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.19.0-91.77.18.uelc20.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:80:10.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:80:10.1: UHCI Host Controller
uhci_hcd 0000:80:10.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:80:10.1: detected 2 ports
uhci_hcd 0000:80:10.1: Adjust the UHCI Controllers bit value patch V1.0.0
uhci_hcd 0000:80:10.1: irq 43, io base 0x0000f000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.19.0-91.77.18.uelc20.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:80:10.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:00:12.0: xHCI Host Controller
xhci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 7
xhci_hcd 0000:00:12.0: hcc params 0x00205fe3 hci version 0x110 quirks 0x0000000000000010
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 4.19.0-91.77.18.uelc20.x86_64 xhci-hcd
usb usb7: SerialNumber: 0000:00:12.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:00:12.0: xHCI Host Controller
xhci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 8
With Zhaoxin xHCI root hub speed patch V1.0.0.
xhci_hcd 0000:00:12.0: Host supports USB 3.1 SuperSpeed
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.19.0-91.77.18.uelc20.x86_64 xhci-hcd
usb usb8: SerialNumber: 0000:00:12.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:80:12.0: xHCI Host Controller
xhci_hcd 0000:80:12.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:80:12.0: hcc params 0x00205fe3 hci version 0x110 quirks 0x0000000000000010
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 4.19.0-91.77.18.uelc20.x86_64 xhci-hcd
usb usb9: SerialNumber: 0000:80:12.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:80:12.0: xHCI Host Controller
xhci_hcd 0000:80:12.0: new USB bus registered, assigned bus number 10
With Zhaoxin xHCI root hub speed patch V1.0.0.
xhci_hcd 0000:80:12.0: Host supports USB 3.1 SuperSpeed
usb usb10: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 4.19.0-91.77.18.uelc20.x86_64 xhci-hcd
usb usb10: SerialNumber: 0000:80:12.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
core: Using 0 MCE banks
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (1988340341, 4744305)->(2016925328, -23840682)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kernel signing key: b4891ff80d32b287f5413bdbc88127d1d36c47c6'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
rtc_cmos 00:02: setting system clock to 2021-03-30 08:57:48 UTC (1617094668)
NMI watchdog: Perf NMI watchdog permanently disabled
Freeing unused decrypted memory: 2040K
tsc: Refined TSC clocksource calibration: 2694.621 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d765094a5, max_idle_ns: 440795299589 ns
Freeing unused kernel image memory: 2376K
clocksource: Switched to clocksource tsc
usb 3-1: new low-speed USB device number 2 using uhci_hcd
Write protecting the kernel read-only data: 18432k
Freeing unused kernel image memory: 2012K
Freeing unused kernel image memory: 384K
Run /init as init process
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Local File Systems.
systemd[1]: Reached target Swap.
systemd[1]: Created slice Root Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Socket.
dca service started, version 1.12.1
libata version 3.00 loaded.
usb 3-1: New USB device found, idVendor=17ef, idProduct=608c, bcdDevice= 2.18
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Lenovo Calliope USB Keyboard
usb 3-1: Manufacturer: Lenovo
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
ahci 0000:00:0f.0: version 3.0
ahci 0000:00:0f.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:0f.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:0f.0: flags: 64bit ncq sntf ilck stag led clo pio ccc ems sxs apst boh
ahci 0000:00:0f.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
igb 0000:03:00.0: added PHC on eth0
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 00:02:e0:91:01:23
igb 0000:03:00.0: eth0: PBA No: 104900-000
igb 0000:03:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[drm] Using P2A bridge for configuration
[drm] AST 2500 detected
[drm] Analog VGA only
[drm] dram MCLK=800 Mhz type=7 bus_width=16 size=01000000
[TTM] Zone kernel: Available graphics memory: 16460448 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
input: Lenovo Lenovo Calliope USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0/0003:17EF:608C.0001/input/input5
fbcon: astdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
ast 0000:0a:00.0: fb0: astdrmfb frame buffer device
hid-generic 0003:17EF:608C.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo Lenovo Calliope USB Keyboard] on usb-0000:00:10.0-1/input0
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m8192@0xfc404000 port 0xfc404100 irq 55
ata2: SATA max UDMA/133 abar m8192@0xfc404000 port 0xfc404180 irq 56
igb 0000:03:00.1: added PHC on eth1
igb 0000:03:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 00:02:e0:91:11:23
igb 0000:03:00.1: eth1: PBA No: 104900-000
igb 0000:03:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[drm] Initialized ast 0.1.0 20120228 for 0000:0a:00.0 on minor 0
igb 0000:03:00.2: added PHC on eth2
igb 0000:03:00.2: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.2: eth2: (PCIe:5.0Gb/s:Width x4) 00:02:e0:91:21:23
igb 0000:03:00.2: eth2: PBA No: 104900-000
igb 0000:03:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
input: Lenovo Lenovo Calliope USB Keyboard System Control as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.1/0003:17EF:608C.0002/input/input6
igb 0000:03:00.3: added PHC on eth3
igb 0000:03:00.3: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.3: eth3: (PCIe:5.0Gb/s:Width x4) 00:02:e0:91:31:23
igb 0000:03:00.3: eth3: PBA No: 104900-000
igb 0000:03:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:03:00.2 ens1f2: renamed from eth2
input: Lenovo Lenovo Calliope USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.1/0003:17EF:608C.0002/input/input7
hid-generic 0003:17EF:608C.0002: input,hidraw1: USB HID v1.11 Device [Lenovo Lenovo Calliope USB Keyboard] on usb-0000:00:10.0-1/input1
igb 0000:03:00.1 ens1f1: renamed from eth1
igb 0000:03:00.3 ens1f3: renamed from eth3
ata1: SATA link down (SStatus 0 SControl 300)
igb 0000:03:00.0 ens1f0: renamed from eth0
usb 3-2: new low-speed USB device number 3 using uhci_hcd
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-10: INTEL SSDSC2KB480G8, XCV10110, max UDMA/133
ata2.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2KB48 0110 PQ: 0 ANSI: 5
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: Enabling discard_zeroes_data
sda: sda1 sda2 sda3 sda4 < sda5 >
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sda] Attached SCSI disk
usb 3-2: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Optical Mouse
usb 3-2: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb3/3-2/3-2:1.0/0003:046D:C077.0003/input/input8
hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.0-2/input0
SGI XFS with ACLs, security attributes, no debug enabled
XFS (sda3): Mounting V5 Filesystem
random: fast init done
XFS (sda3): Ending clean mount
systemd-journald[300]: Received SIGTERM from PID 1 (systemd).
systemd: 15 output lines suppressed due to ratelimiting
SELinux: Disabled at runtime.
audit: type=1404 audit(1617094671.196:2): enforcing=0 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=0 old-enabled=1 lsm=selinux res=1
systemd[1]: Inserted module 'ip_tables'
systemd-journald[592]: Received request to flush runtime journal from PID 1
acpi_cpufreq: acpi_cpufreq: failed to register hotplug callbacks
sd 1:0:0:0: Attached scsi generic sg0 type 0
input: PC Speaker as /devices/platform/pcspkr/input/input9
VFS: Open an write opened block device exclusively sda2 [705 swapon].
RNG detected
cputemp cputemp.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
cputemp cputemp.1: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
cputemp cputemp.2: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
cputemp cputemp.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
cputemp cputemp.4: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
cputemp cputemp.5: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
Adding 16516092k swap on /dev/sda2. Priority:-2 extents:1 across:16516092k SSFS
cputemp cputemp.6: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
cputemp cputemp.7: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
cputemp cputemp.8: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
cputemp cputemp.9: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
cputemp cputemp.10: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
cputemp cputemp.11: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
cputemp cputemp.12: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
cputemp cputemp.13: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
cputemp cputemp.14: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
cputemp cputemp.15: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
HDAC: Support Zhaoxin HDAC ID patch V1.0.0
HDAC: Zhaoxin GFX HDAC patch V2.0.1
snd_hda_intel 0000:00:14.0: chipset global capabilities = 0x4401
snd_hda_intel 0000:00:14.0: Clearing TCSEL
padlock_aes: Using PadLock ACE for AES algorithm.
snd_hda_intel 0000:00:14.0: no codecs found!
padlock_sha: Using PadLock ACE for SHA1/SHA256 algorithms.
XFS (sda1): Mounting V5 Filesystem
XFS (sda5): Mounting V5 Filesystem
XFS (sda1): Ending clean mount
XFS (sda5): Ending clean mount
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
IPv6: ADDRCONF(NETDEV_UP): ens1f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f3: link is not ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
IPv6: ADDRCONF(NETDEV_UP): ens1f3: link is not ready
igb 0000:03:00.1 ens1f1: igb: ens1f1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
igb 0000:03:00.3 ens1f3: igb: ens1f3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ens1f3: link becomes ready
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
bonding: bond0 is being created...
bonding: bond0 already exists
bond0: Enslaving ens1f1 as an active interface with an up link
igb 0000:03:00.1 ens1f1: igb: ens1f1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
tun: Universal TUN/TAP device driver, 1.6
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): ens1f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f2: link is not ready
irq 79: Affinity broken due to vector space exhaustion.
irq 81: Affinity broken due to vector space exhaustion.
irq 82: Affinity broken due to vector space exhaustion.
irq 85: Affinity broken due to vector space exhaustion.
irq 86: Affinity broken due to vector space exhaustion.
bond0: Enslaving ens1f3 as an active interface with an up link
igb 0000:03:00.3 ens1f3: igb: ens1f3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_UP): ens1f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens1f2: link is not ready