dmesg - NODRV
microcode: microcode updated early to revision 0x60f, date = 2010-09-29
Linux version 5.10.11-200.fc33.x86_64 (mockbuild@bkernel02.iad2.fedoraproject.org) (gcc (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9), GNU ld version 2.35-18.fc33) #1 SMP Wed Jan 27 20:21:22 UTC 2021
Command line: BOOT_IMAGE=(hd0,msdos1)//1856dea3612f444baaf5512fce0144c0/5.10.11-200.fc33.x86_64/linux root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet rd.driver.blacklist=nouveau modprobe.blacklist=nouveau nvidia-drm.modeset=0
Disabled fast string operations
x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000ef000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000b8f42fff] usable
BIOS-e820: [mem 0x00000000b8f43000-0x00000000b8f44fff] reserved
BIOS-e820: [mem 0x00000000b8f45000-0x00000000b9d6ffff] usable
BIOS-e820: [mem 0x00000000b9d70000-0x00000000b9d7ffff] ACPI NVS
BIOS-e820: [mem 0x00000000b9d80000-0x00000000bc4c3fff] usable
BIOS-e820: [mem 0x00000000bc4c4000-0x00000000bc6c3fff] ACPI NVS
BIOS-e820: [mem 0x00000000bc6c4000-0x00000000bde91fff] usable
BIOS-e820: [mem 0x00000000bde92000-0x00000000bde99fff] reserved
BIOS-e820: [mem 0x00000000bde9a000-0x00000000bdebefff] usable
BIOS-e820: [mem 0x00000000bdebf000-0x00000000bdecefff] reserved
BIOS-e820: [mem 0x00000000bdecf000-0x00000000bdfcefff] ACPI NVS
BIOS-e820: [mem 0x00000000bdfcf000-0x00000000bdffefff] ACPI data
BIOS-e820: [mem 0x00000000bdfff000-0x00000000bdffffff] usable
BIOS-e820: [mem 0x00000000be000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Hewlett-Packard HP EliteBook 8730w/30EC, BIOS 68PAD Ver. F.0F 09/14/2009
tsc: Fast TSC calibration failed
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x13c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFE00000 mask FFFE00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 100000000 mask FC0000000 write-back
4 base 13C000000 mask FFC000000 uncachable
5 base 0B9D70000 mask FFFFF0000 uncachable
6 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
RAMDISK: [mem 0x33c4b000-0x35e1dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6810 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000BDFFE120 00008C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 0x00000000BDFFC000 0000F4 (v03 HPQOEM 30EC 0000000F HP 00000001)
ACPI: DSDT 0x00000000BDFDE000 0182D7 (v01 HPQOEM 30EC 00000001 INTL 20060912)
ACPI: FACS 0x00000000BDF9D000 000040
ACPI: FACS 0x00000000BDF9D000 000040
ACPI: HPET 0x00000000BDFFB000 000038 (v01 HPQOEM 30EC 00000001 HP 00000001)
ACPI: APIC 0x00000000BDFFA000 000084 (v01 HPQOEM 30EC 00000001 HP 00000001)
ACPI: MCFG 0x00000000BDFF9000 00003C (v01 HPQOEM 30EC 00000001 HP 00000001)
ACPI: TCPA 0x00000000BDFF7000 000032 (v02 HPQOEM 30EC 00000000 HP 00000001)
ACPI: SSDT 0x00000000BDFDB000 0003B0 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
ACPI: SLIC 0x00000000BDFD9000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: SSDT 0x00000000BDFD6000 001F08 (v01 HPQOEM NVIDIAGF 00000001 INTL 20060912)
ACPI: DMAR 0x00000000BDFD5000 0000D8 (v01 ? 00000001 00000000)
ACPI: ASF! 0x00000000BDFF8000 000095 (v32 HPQOEM 30EC 00000001 HP 00000001)
ACPI: SSDT 0x00000000BDFD4000 00066C (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: SSDT 0x00000000BDFD3000 000288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
ACPI: SSDT 0x00000000BDFD2000 000225 (v01 PmRef ApTst 00003000 INTL 20060912)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013bffffff]
NODE_DATA(0) allocated [mem 0x13bfd5000-0x13bffffff]
Zone ranges:
DMA [mem 0x0000000000000000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000013bffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000000000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000b8f42fff]
node 0: [mem 0x00000000b8f45000-0x00000000b9d6ffff]
node 0: [mem 0x00000000b9d80000-0x00000000bc4c3fff]
node 0: [mem 0x00000000bc6c4000-0x00000000bde91fff]
node 0: [mem 0x00000000bde9a000-0x00000000bdebefff]
node 0: [mem 0x00000000bdfff000-0x00000000bdffffff]
node 0: [mem 0x0000000100000000-0x000000013bffffff]
Zeroed struct page in unavailable ranges: 25531 pages
Initmem setup node 0 [mem 0x0000000000000000-0x000000013bffffff]
On node 0 totalpages: 1023045
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 12083 pages used for memmap
DMA32 zone: 773286 pages, LIFO batch:63
Normal zone: 3840 pages used for memmap
Normal zone: 245760 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000eefff]
PM: hibernation: Registered nosave memory: [mem 0x000ef000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0xb8f43000-0xb8f44fff]
PM: hibernation: Registered nosave memory: [mem 0xb9d70000-0xb9d7ffff]
PM: hibernation: Registered nosave memory: [mem 0xbc4c4000-0xbc6c3fff]
PM: hibernation: Registered nosave memory: [mem 0xbde92000-0xbde99fff]
PM: hibernation: Registered nosave memory: [mem 0xbdebf000-0xbdecefff]
PM: hibernation: Registered nosave memory: [mem 0xbdecf000-0xbdfcefff]
PM: hibernation: Registered nosave memory: [mem 0xbdfcf000-0xbdffefff]
PM: hibernation: Registered nosave memory: [mem 0xbe000000-0xbfffffff]
PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
PM: hibernation: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
PM: hibernation: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
PM: hibernation: Registered nosave memory: [mem 0xffe80000-0xffffffff]
[mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 1007036
Policy zone: Normal
Kernel command line: BOOT_IMAGE=(hd0,msdos1)//1856dea3612f444baaf5512fce0144c0/5.10.11-200.fc33.x86_64/linux root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet rd.driver.blacklist=nouveau modprobe.blacklist=nouveau nvidia-drm.modeset=0
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 3875444K/4092180K available (14345K kernel code, 3465K rwdata, 9704K rodata, 2536K init, 5504K bss, 216476K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x2e/0x550 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 45610 entries in 179 pages
ftrace: allocated 179 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
Console: colour VGA+ 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200925
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 36
DMAR: DRHD base: 0x000000feb03000 flags: 0x0
DMAR: dmar0: reg_base_addr feb03000 ver 1:0 cap c9008020e30260 ecap 1000
DMAR: DRHD base: 0x000000feb00000 flags: 0x0
DMAR: dmar1: reg_base_addr feb00000 ver 1:0 cap c0000020630270 ecap 1000
DMAR: DRHD base: 0x000000feb02000 flags: 0x1
DMAR: dmar2: reg_base_addr feb02000 ver 1:0 cap c9008020630260 ecap 1000
DMAR: RMRR base: 0x000000b9d70000 end: 0x000000b9d7ffff
DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR [0x00000000b9d70000-0x00000000b9d7ffff], contact BIOS vendor for fixes
DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR [0x00000000b9d70000-0x00000000b9d7ffff]
BIOS vendor: Hewlett-Packard; Ver: 68PAD Ver. F.0F; Product Version: F.0F
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 2526.995 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x246cd725a61, max_idle_ns: 440795277397 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.99 BogoMIPS (lpj=2526995)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
SELinux: Initializing.
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Disabled fast string operations
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Vulnerable
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz (family: 0x6, model: 0x17, stepping: 0x6)
Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
smp: Brought up 1 node, 2 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 2 processors activated (10107.98 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xb9d70000-0xb9d7ffff] (65536 bytes)
PM: Registering ACPI NVS region [mem 0xbc4c4000-0xbc6c3fff] (2097152 bytes)
PM: Registering ACPI NVS region [mem 0xbdecf000-0xbdfcefff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 15:45:24, date: 2021-02-01
NET: Registered protocol family 16
DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1612194324.118:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
alg: No test for 842 (842-generic)
alg: No test for 842 (842-scomp)
raid6: skip pq benchmark and using algorithm sse2x4
raid6: using ssse3x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF98BF003F3000 000275 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF98BF0036E800 00059A (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF98BF00BBCE00 0001D7 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF98BF00B94900 00008D (v01 PmRef ApCst 00003000 INTL 20060912)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 13 GPEs in block 00 to 3F
ACPI: Power Resource [APPR] (off)
ACPI: Power Resource [COMP] (off)
ACPI: Power Resource [LPP] (on)
ACPI: Power Resource [PGF0] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window]
pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability
pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000
pci 0000:00:03.0: reg 0x10: [mem 0xdb327000-0xdb32700f 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:2a46] type 00 class 0x010185
pci 0000:00:03.2: reg 0x10: [io 0x8130-0x8137]
pci 0000:00:03.2: reg 0x14: [io 0x8144-0x8147]
pci 0000:00:03.2: reg 0x18: [io 0x8128-0x812f]
pci 0000:00:03.2: reg 0x1c: [io 0x8140-0x8143]
pci 0000:00:03.2: reg 0x20: [io 0x8100-0x810f]
pci 0000:00:03.3: [8086:2a47] type 00 class 0x070002
pci 0000:00:03.3: reg 0x10: [io 0x8120-0x8127]
pci 0000:00:03.3: reg 0x14: [mem 0xdb325000-0xdb325fff]
pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xdb300000-0xdb31ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xdb324000-0xdb324fff]
pci 0000:00:19.0: reg 0x18: [io 0x80e0-0x80ff]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x80c0-0x80df]
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x80a0-0x80bf]
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0x8080-0x809f]
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xdb326c00-0xdb326fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xdb320000-0xdb323fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x8060-0x807f]
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x8040-0x805f]
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x8020-0x803f]
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xdb326800-0xdb326bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x8118-0x811f]
pci 0000:00:1f.2: reg 0x14: [io 0x813c-0x813f]
pci 0000:00:1f.2: reg 0x18: [io 0x8110-0x8117]
pci 0000:00:1f.2: reg 0x1c: [io 0x8138-0x813b]
pci 0000:00:1f.2: reg 0x20: [io 0x8000-0x801f]
pci 0000:00:1f.2: reg 0x24: [mem 0xdb326000-0xdb3267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:01:00.0: [10de:063a] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io 0x7000-0x707f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd2ffffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xdb200000-0xdb2fffff]
pci 0000:03:00.0: [8086:4236] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xdb100000-0xdb101fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xdb100000-0xdb1fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04-44]
pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff]
pci 0000:00:1c.2: bridge window [mem 0xd7100000-0xdb0fffff]
pci 0000:00:1c.4: PCI bridge to [bus 45-85]
pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
pci 0000:00:1c.4: bridge window [mem 0xd3100000-0xd70fffff]
pci_bus 0000:86: extended config space not accessible
pci 0000:86:06.0: proprietary Ricoh MMC controller disabled (via FireWire function)
pci 0000:86:06.0: MMC cards are now supported by standard SDHCI controller
pci 0000:86:06.0: [1180:0832] type 00 class 0x0c0010
pci 0000:86:06.0: reg 0x10: [mem 0xd3001000-0xd30017ff]
pci 0000:86:06.0: supports D1 D2
pci 0000:86:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:86:06.1: [1180:0822] type 00 class 0x080500
pci 0000:86:06.1: reg 0x10: [mem 0xd3001b00-0xd3001bff]
pci 0000:86:06.1: supports D1 D2
pci 0000:86:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:86:06.2: [1180:0592] type 00 class 0x088000
pci 0000:86:06.2: reg 0x10: [mem 0xd3001900-0xd30019ff]
pci 0000:86:06.2: supports D1 D2
pci 0000:86:06.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:86:06.3: [1180:0852] type 00 class 0x088000
pci 0000:86:06.3: reg 0x10: [mem 0xd3001800-0xd30018ff]
pci 0000:86:06.3: supports D1 D2
pci 0000:86:06.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:86:06.4: [1180:0476] type 02 class 0x060700
pci 0000:86:06.4: reg 0x10: [mem 0xd3000000-0xd3000fff]
pci 0000:86:06.4: supports D1 D2
pci 0000:86:06.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 86-87] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1e.0: bridge window [mem 0xd3000000-0xd30fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfedfffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff window] (subtractive decode)
pci_bus 0000:87: extended config space not accessible
pci_bus 0000:87: busn_res: [bus 87] end can not be updated to 8a
pci 0000:00:1e.0: bridge has subordinate 87 but max busn 8a
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x16
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
iommu: Default domain type: Translated
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xb8f43000-0xbbffffff]
e820: reserve RAM buffer [mem 0xb9d70000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbc4c4000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbde92000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdebf000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
hpet: 4 channels of 0 reserved for per-cpu timers
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
system 00:03: [io 0x0200-0x027f] has been reserved
system 00:03: [io 0x1000-0x1003] has been reserved
system 00:03: [io 0x1010-0x101f] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0x0400-0x047f] has been reserved
system 00:03: [io 0x0500-0x057f] has been reserved
system 00:03: [io 0xef80-0xef9f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs SYN0143 SYN0100 SYN0002 PNP0f13 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 32768 bind 32768)
MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-44] add_size 200000 add_align 100000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 45-85] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xdb400000-0xdb5fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xdb600000-0xdb7fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xdb800000-0xdb9fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xdba00000-0xdbbfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x9000-0x9fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0xa000-0xafff]
pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd2ffffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.0: bridge window [mem 0xdb200000-0xdb2fffff]
pci 0000:00:1c.0: bridge window [mem 0xdb400000-0xdb5fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.1: bridge window [mem 0xdb100000-0xdb1fffff]
pci 0000:00:1c.1: bridge window [mem 0xdb600000-0xdb7fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-44]
pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff]
pci 0000:00:1c.2: bridge window [mem 0xd7100000-0xdb0fffff]
pci 0000:00:1c.2: bridge window [mem 0xdb800000-0xdb9fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 45-85]
pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
pci 0000:00:1c.4: bridge window [mem 0xd3100000-0xd70fffff]
pci 0000:00:1c.4: bridge window [mem 0xdba00000-0xdbbfffff 64bit pref]
pci 0000:86:06.4: BAR 15: assigned [mem 0xdc000000-0xdfffffff pref]
pci 0000:86:06.4: BAR 16: assigned [mem 0xf0000000-0xf3ffffff]
pci 0000:86:06.4: BAR 13: assigned [io 0x2000-0x20ff]
pci 0000:86:06.4: BAR 14: assigned [io 0x2400-0x24ff]
pci 0000:86:06.4: CardBus bridge to [bus 87]
pci 0000:86:06.4: bridge window [io 0x2000-0x20ff]
pci 0000:86:06.4: bridge window [io 0x2400-0x24ff]
pci 0000:86:06.4: bridge window [mem 0xdc000000-0xdfffffff pref]
pci 0000:86:06.4: bridge window [mem 0xf0000000-0xf3ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 86-87]
pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1e.0: bridge window [mem 0xd3000000-0xd30fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window]
pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:02: resource 1 [mem 0xdb200000-0xdb2fffff]
pci_bus 0000:02: resource 2 [mem 0xdb400000-0xdb5fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
pci_bus 0000:03: resource 1 [mem 0xdb100000-0xdb1fffff]
pci_bus 0000:03: resource 2 [mem 0xdb600000-0xdb7fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x5000-0x6fff]
pci_bus 0000:04: resource 1 [mem 0xd7100000-0xdb0fffff]
pci_bus 0000:04: resource 2 [mem 0xdb800000-0xdb9fffff 64bit pref]
pci_bus 0000:45: resource 0 [io 0x3000-0x4fff]
pci_bus 0000:45: resource 1 [mem 0xd3100000-0xd70fffff]
pci_bus 0000:45: resource 2 [mem 0xdba00000-0xdbbfffff 64bit pref]
pci_bus 0000:86: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:86: resource 1 [mem 0xd3000000-0xd30fffff]
pci_bus 0000:86: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:86: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:86: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:86: resource 7 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:86: resource 8 [mem 0xf0000000-0xfedfffff window]
pci_bus 0000:86: resource 9 [mem 0xfee01000-0xffffffff window]
pci_bus 0000:87: resource 0 [io 0x2000-0x20ff]
pci_bus 0000:87: resource 1 [io 0x2400-0x24ff]
pci_bus 0000:87: resource 2 [mem 0xdc000000-0xdfffffff pref]
pci_bus 0000:87: resource 3 [mem 0xf0000000-0xf3ffffff]
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 34636K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000b4f43000-0x00000000b8f43000] (64MB)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
NET: Registered protocol family 38
xor: measuring software checksum speed
prefetch64-sse : 13216 MB/sec
generic_sse : 11322 MB/sec
xor: using function: prefetch64-sse (13216 MB/sec)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:01.0: PME: Signaling with IRQ 24
pcieport 0000:00:01.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ IbPresDis- LLActRep-
pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum)
pcieport 0000:00:1c.1: PME: Signaling with IRQ 26
pcieport 0000:00:1c.1: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum)
pcieport 0000:00:1c.2: PME: Signaling with IRQ 27
pcieport 0000:00:1c.2: pciehp: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum)
pcieport 0000:00:1c.4: PME: Signaling with IRQ 28
pcieport 0000:00:1c.4: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x3122220
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: \_PR_.CPU0: Found 2 idle states
intel_idle: v0.5.1 model 0x17
intel_idle: Local APIC timer is reliable in C1
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [GFXZ] (30 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [DTSZ] (48 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [BATZ] (34 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [CPUZ] (48 C)
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [LOCZ] (37 C)
0000:00:03.3: ttyS4 at I/O 0x8120 (irq = 17, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A 750->750000us B 2000->2000000us C 750->750000us D 750->750000us
tpm tpm0: Operation Timed out
tpm tpm0: Operation Timed out
tpm tpm0: Adjusting TPM timeout parameters.
random: fast init done
battery: ACPI: Battery Slot [BAT0] (battery present)
battery: ACPI: Battery Slot [BAT1] (battery absent)
tsc: Refined TSC clocksource calibration: 2526.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x246cdab5d1d, max_idle_ns: 440795263955 ns
clocksource: Switched to clocksource tsc
tpm tpm0: TPM is disabled/deactivated (0x7)
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdb326000 port 0xdb326100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xdb326000 port 0xdb326180 irq 29
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xdb326000 port 0xdb326300 irq 29
ata6: SATA max UDMA/133 abar m2048@0xdb326000 port 0xdb326380 irq 29
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 19, io mem 0xdb326c00
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.10.11-200.fc33.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 20, io mem 0xdb326800
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.10.11-200.fc33.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000080c0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 5.10.11-200.fc33.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 17, io base 0x000080a0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 5.10.11-200.fc33.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 18, io base 0x00008080
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 5.10.11-200.fc33.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00008060
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 5.10.11-200.fc33.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00008040
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 5.10.11-200.fc33.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008020
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 5.10.11-200.fc33.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: registered as rtc0
rtc_cmos 00:04: setting system clock to 2021-02-01T15:45:26 UTC (1612194326)
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
intel_pstate: CPU model not supported
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
RPL Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: sig=0x10676, pf=0x80, revision=0x60f
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (2443673810, -5993661)->(2465674442, -27994293)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 4bf8e4006e8a944fbdd9c5c8c5fd7ab107f8af41'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, crc32c=crc32c-generic
Key type encrypted registered
ima: Allocated hash algorithm: sha256
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 9:874:789
RAS: Correctable Errors collector initialized.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: Hitachi HTS727550A9E364, JF3OA0E0, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72755 A0E0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 8-2: new low-speed USB device number 2 using uhci_hcd
usb 4-1: new full-speed USB device number 2 using uhci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 8-2: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.00
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: Microsoft USB Optical Mouse
usb 8-2: Manufacturer: PixArt
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SC04, max UDMA/100
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: configured for UDMA/100
input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:045E:00CB.0001/input/input12
hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:1d.2-2/input0
psmouse serio4: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa44791/0xb00000/0x0/0x0, board id: 0, fw id: 433849
psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50L SC04 PQ: 0 ANSI: 5
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
usb 4-1: New USB device found, idVendor=08ff, idProduct=2810, bcdDevice=17.03
usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-1: Product: Fingerprint Sensor
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 1-5: new high-speed USB device number 3 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
usb 1-5: New USB device found, idVendor=04f2, idProduct=b053, bcdDevice=32.18
usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-5: Product: CKA7216
usb 1-5: Manufacturer: Chicony Electronics Co., Ltd.
usb 1-5: SerialNumber: SN0001
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 2536K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (text/rodata gap) memory: 2036K
Freeing unused kernel image (rodata/data gap) memory: 536K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
rhgb
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=(hd0,msdos1)//1856dea3612f444baaf5512fce0144c0/5.10.11-200.fc33.x86_64/linux
systemd[1]: systemd v246.7-2.fc33 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
systemd[1]: Queued start job for default target Initrd Default Target.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Local File Systems.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Slices.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Swap.
systemd[1]: Reached target Timers.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Started Memstrack Anylazing Service.
systemd[1]: Started Hardware RNG Entropy Gatherer Daemon.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: memstrack.service: Succeeded.
fuse: init (API version 7.32)
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
audit: type=1130 audit(1612194328.553:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Finished Apply Kernel Variables.
audit: type=1130 audit(1612194328.568:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Journal Service.
audit: type=1130 audit(1612194328.652:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1612194328.676:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1612194328.684:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1612194328.811:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1612194328.851:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1334 audit(1612194328.852:9): prog-id=6 op=LOAD
audit: type=1334 audit(1612194328.852:10): prog-id=7 op=LOAD
ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
acpi device:02: registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input14
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input13
pata_acpi 0000:00:03.2: enabling device (0000 -> 0001)
scsi host6: ata_generic
scsi host7: ata_generic
ata7: PATA max UDMA/100 cmd 0x8130 ctl 0x8144 bmdma 0x8100 irq 18
ata8: PATA max UDMA/100 cmd 0x8128 ctl 0x8140 bmdma 0x8108 irq 18
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
yenta_cardbus 0000:86:06.4: CardBus bridge found [103c:30ec]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
firewire_ohci 0000:86:06.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
sdhci-pci 0000:86:06.1: SDHCI controller found [1180:0822] (rev 25)
sdhci-pci 0000:86:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
sdhci-pci 0000:86:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:86:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI controller on PCI [0000:86:06.1] using DMA
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:64:75:de:17
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1052FF-0FF
yenta_cardbus 0000:86:06.4: ISA IRQ mask 0x0cb8, PCI irq 17
yenta_cardbus 0000:86:06.4: Socket status: 30000810
yenta_cardbus 0000:86:06.4: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
yenta_cardbus 0000:86:06.4: pcmcia: parent PCI bridge window: [mem 0xd3000000-0xd30fffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xd3000000-0xd30fffff:
excluding 0xd3000000-0xd300ffff
e1000e 0000:00:19.0 enp0s25: renamed from eth0
firewire_core 0000:86:06.0: created device fw0: GUID 5566778811223344, S400
kauditd_printk_skb: 4 callbacks suppressed
audit: type=1130 audit(1612194330.637:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
pcmcia_socket pcmcia_socket0: cs: memory probe 0xd3010000-0xd30fffff:
excluding 0xd30fe000-0xd310bfff
pcmcia 0.0: pcmcia: registering new device pcmcia0.0 (IRQ: 17)
scsi host8: pata_pcmcia
ata9: PATA max PIO0 cmd 0x2100 ctl 0x210e irq 17
audit: type=1130 audit(1612194340.355:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1334 audit(1612194340.621:17): prog-id=5 op=UNLOAD
audit: type=1334 audit(1612194340.621:18): prog-id=4 op=UNLOAD
audit: type=1334 audit(1612194340.621:19): prog-id=3 op=UNLOAD
audit: type=1334 audit(1612194340.628:20): prog-id=8 op=UNLOAD
audit: type=1334 audit(1612194340.628:21): prog-id=7 op=UNLOAD
audit: type=1334 audit(1612194340.628:22): prog-id=6 op=UNLOAD
audit: type=1334 audit(1612194340.809:23): prog-id=9 op=LOAD
audit: type=1334 audit(1612194340.810:24): prog-id=10 op=LOAD
audit: type=1334 audit(1612194340.810:25): prog-id=11 op=LOAD
systemd[1]: systemd v246.7-2.fc33 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
zram_generator::generator[519]: Creating dev-zram0.swap for /dev/zram0 (1912MB)
systemd-sysv-generator[517]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[517]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
zram: Added device: zram0
systemd-sysv-generator[517]: SysV service '/etc/rc.d/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /usr/lib/systemd/system/ovs-vswitchd.service:12: PIDFile= references a path below legacy directory /var/run/, updating /var/run/openvswitch/ovs-vswitchd.pid → /run/openvswitch/ovs-vswitchd.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/ovsdb-server.service:10: PIDFile= references a path below legacy directory /var/run/, updating /var/run/openvswitch/ovsdb-server.pid → /run/openvswitch/ovsdb-server.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
systemd[1]: /usr/lib/systemd/system/alsa-restore.service:15: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/mcelog.service:8: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
kauditd_printk_skb: 33 callbacks suppressed
audit: type=1334 audit(1612194346.977:59): prog-id=17 op=LOAD
audit: type=1334 audit(1612194346.978:60): prog-id=18 op=LOAD
audit: type=1334 audit(1612194346.978:61): prog-id=19 op=LOAD
audit: type=1131 audit(1612194346.979:62): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: initrd-switch-root.service: Succeeded.
systemd[1]: Stopped Switch Root.
audit: type=1130 audit(1612194346.980:63): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1612194346.980:64): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-swap\x2dcreate.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
audit: type=1334 audit(1612194346.983:65): prog-id=17 op=UNLOAD
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Login Prompts.
systemd[1]: Stopped target Switch Root.
systemd[1]: Stopped target Initrd File Systems.
systemd[1]: Stopped target Initrd Root File System.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Activating swap /dev/mapper/fedora-swap...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Preprocess NFS configuration convertion...
systemd[1]: plymouth-switch-root.service: Succeeded.
systemd[1]: Stopped Plymouth switch root service.
audit: type=1131 audit(1612194347.011:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Stopped Journal Service.
audit: type=1130 audit(1612194347.155:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1612194347.155:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Starting Journal Service...
Adding 4075516k swap on /dev/mapper/fedora-swap. Priority:-2 extents:1 across:4075516k FS
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: sysroot.mount: Succeeded.
systemd[1]: Activated swap /dev/mapper/fedora-swap.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: modprobe@configfs.service: Succeeded.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: modprobe@fuse.service: Succeeded.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: nfs-convert.service: Succeeded.
systemd[1]: Finished Preprocess NFS configuration convertion.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Mounted FUSE Control File System.
EXT4-fs (dm-0): re-mounted. Opts: (null)
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped.
systemd[1]: Starting Configure read-only root support...
systemd[1]: Condition check resulted in First Boot Wizard being skipped.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Create System Users being skipped.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Journal Service.
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP]
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
zram0: detected capacity change from 0 to 2004877312
pktcdvd: pktcdvd0: writer mapped to sr0
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200925/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20200925/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20200925/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
r592: driver successfully loaded
Intel(R) Wireless WiFi driver for Linux
iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
ppdev: user-space parallel port driver
mc: Linux media interface: v0.10
Adding 1957884k swap on /dev/zram0. Priority:100 extents:1 across:1957884k SSFS
hp_accel: laptop model unknown, using default axes configuration
lis3lv02d: 8 bits sensor found
iTCO_vendor_support: vendor-support=0
input: HP WMI hotkeys as /devices/virtual/input/input15
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input16
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
kauditd_printk_skb: 36 callbacks suppressed
audit: type=1130 audit(1612194352.204:105): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 5000-5.ucode op_mode iwldvm
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24
iwlwifi 0000:03:00.0: reporting RF_KILL (radio disabled)
iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
videodev: Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device CKA7216 (04f2:b053)
input: CKA7216: HP Webcam [2 MP] as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
intel_powerclamp: No package C-state available
intel_powerclamp: No package C-state available
audit: type=1130 audit(1612194353.549:106): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
loop: module loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc' as unstable because the skew is too large:
clocksource: 'hpet' wd_now: 19b80b99 wd_last: 1937e790 mask: ffffffff
clocksource: 'tsc' cs_now: 1c8e989bb3 cs_last: 1c43e24bda mask: ffffffffffffffff
tsc: Marking TSC unstable due to clocksource watchdog
TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
sched_clock: Marking unstable (30008099148, -5994298) 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3139 > 3132), lowering kernel.perf_event_max_sample_rate to 63000
zram_generator::generator[4613]: Creating dev-zram0.swap for /dev/zram0 (1912MB)
systemd-sysv-generator[4611]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[4611]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[4611]: SysV service '/etc/rc.d/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
perf: interrupt took too long (3928 > 3923), lowering kernel.perf_event_max_sample_rate to 50000
usb 8-2: USB disconnect, device number 2
usb 8-2: new low-speed USB device number 3 using uhci_hcd
usb 8-2: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.00
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: Microsoft USB Optical Mouse
usb 8-2: Manufacturer: PixArt
input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:045E:00CB.0002/input/input22
hid-generic 0003:045E:00CB.0002: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:1d.2-2/input0
usb 8-2: USB disconnect, device number 3
usb 8-2: new low-speed USB device number 4 using uhci_hcd
usb 8-2: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.00
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: Microsoft USB Optical Mouse
usb 8-2: Manufacturer: PixArt
input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:045E:00CB.0003/input/input23
hid-generic 0003:045E:00CB.0003: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:1d.2-2/input0
usb 8-2: USB disconnect, device number 4
usb 8-2: new low-speed USB device number 5 using uhci_hcd
usb 8-2: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.00
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: Microsoft USB Optical Mouse
usb 8-2: Manufacturer: PixArt
input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:045E:00CB.0004/input/input24
hid-generic 0003:045E:00CB.0004: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:1d.2-2/input0
usb 8-2: USB disconnect, device number 5
usb 8-2: new low-speed USB device number 6 using uhci_hcd
usb 8-2: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.00
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: Microsoft USB Optical Mouse
usb 8-2: Manufacturer: PixArt
input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:045E:00CB.0005/input/input25
hid-generic 0003:045E:00CB.0005: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:1d.2-2/input0
usb 8-2: USB disconnect, device number 6
usb 8-2: new low-speed USB device number 7 using uhci_hcd
usb 8-2: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.00
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: Microsoft USB Optical Mouse
usb 8-2: Manufacturer: PixArt
input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:045E:00CB.0006/input/input26
hid-generic 0003:045E:00CB.0006: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:1d.2-2/input0
usb 8-2: USB disconnect, device number 7
usb 8-2: new low-speed USB device number 8 using uhci_hcd
usb 8-2: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.00
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: Microsoft USB Optical Mouse
usb 8-2: Manufacturer: PixArt
input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:045E:00CB.0007/input/input27
hid-generic 0003:045E:00CB.0007: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:1d.2-2/input0
systemd-sysv-generator[11115]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[11115]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[11115]: SysV service '/etc/rc.d/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
zram_generator::generator[11118]: Creating dev-zram0.swap for /dev/zram0 (1912MB)
systemd-sysv-generator[12891]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[12891]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[12891]: SysV service '/etc/rc.d/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
zram_generator::generator[12893]: Creating dev-zram0.swap for /dev/zram0 (1912MB)
systemd-sysv-generator[15132]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[15132]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[15132]: SysV service '/etc/rc.d/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
zram_generator::generator[15134]: Creating dev-zram0.swap for /dev/zram0 (1912MB)
SGI XFS with ACLs, security attributes, scrub, quota, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
systemd-sysv-generator[17007]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[17007]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[17007]: SysV service '/etc/rc.d/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
zram_generator::generator[17009]: Creating dev-zram0.swap for /dev/zram0 (1912MB)
usb 8-2: USB disconnect, device number 8
usb 8-2: new low-speed USB device number 9 using uhci_hcd
usb 8-2: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.00
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: Microsoft USB Optical Mouse
usb 8-2: Manufacturer: PixArt
input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:045E:00CB.0008/input/input28
hid-generic 0003:045E:00CB.0008: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:1d.2-2/input0
usb 8-2: USB disconnect, device number 9
usb 8-2: new low-speed USB device number 10 using uhci_hcd
usb 8-2: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.00
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: Microsoft USB Optical Mouse
usb 8-2: Manufacturer: PixArt
input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:045E:00CB.0009/input/input29
hid-generic 0003:045E:00CB.0009: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:1d.2-2/input0
usb 8-2: USB disconnect, device number 10
usb 8-2: new low-speed USB device number 11 using uhci_hcd
usb 8-2: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.00
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: Microsoft USB Optical Mouse
usb 8-2: Manufacturer: PixArt
input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:045E:00CB.000A/input/input30
hid-generic 0003:045E:00CB.000A: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:1d.2-2/input0