dmesg - 800
microcode: microcode updated early to revision 0x28, date = 2019-11-12
Linux version 5.4.0-53-generic (buildd@lcy01-amd64-007) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #59-Ubuntu SMP Wed Oct 21 09:38:44 UTC 2020 (Ubuntu 5.4.0-53.59-generic 5.4.65)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000004efff] usable
BIOS-e820: [mem 0x000000000004f000-0x000000000004ffff] reserved
BIOS-e820: [mem 0x0000000000050000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c6901fff] usable
BIOS-e820: [mem 0x00000000c6902000-0x00000000c6908fff] ACPI NVS
BIOS-e820: [mem 0x00000000c6909000-0x00000000c6d4dfff] usable
BIOS-e820: [mem 0x00000000c6d4e000-0x00000000c7102fff] reserved
BIOS-e820: [mem 0x00000000c7103000-0x00000000d9874fff] usable
BIOS-e820: [mem 0x00000000d9875000-0x00000000d98fefff] reserved
BIOS-e820: [mem 0x00000000d98ff000-0x00000000d991efff] ACPI data
BIOS-e820: [mem 0x00000000d991f000-0x00000000d9a09fff] ACPI NVS
BIOS-e820: [mem 0x00000000d9a0a000-0x00000000d9ffefff] reserved
BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
BIOS-e820: [mem 0x00000000dc000000-0x00000000de1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xc6492018-0xc64a2057] usable ==> usable
e820: update [mem 0xc6492018-0xc64a2057] usable ==> usable
e820: update [mem 0xc6482018-0xc6491c57] usable ==> usable
e820: update [mem 0xc6482018-0xc6491c57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000004efff] usable
reserve setup_data: [mem 0x000000000004f000-0x000000000004ffff] reserved
reserve setup_data: [mem 0x0000000000050000-0x000000000009dfff] usable
reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000c6482017] usable
reserve setup_data: [mem 0x00000000c6482018-0x00000000c6491c57] usable
reserve setup_data: [mem 0x00000000c6491c58-0x00000000c6492017] usable
reserve setup_data: [mem 0x00000000c6492018-0x00000000c64a2057] usable
reserve setup_data: [mem 0x00000000c64a2058-0x00000000c6901fff] usable
reserve setup_data: [mem 0x00000000c6902000-0x00000000c6908fff] ACPI NVS
reserve setup_data: [mem 0x00000000c6909000-0x00000000c6d4dfff] usable
reserve setup_data: [mem 0x00000000c6d4e000-0x00000000c7102fff] reserved
reserve setup_data: [mem 0x00000000c7103000-0x00000000d9874fff] usable
reserve setup_data: [mem 0x00000000d9875000-0x00000000d98fefff] reserved
reserve setup_data: [mem 0x00000000d98ff000-0x00000000d991efff] ACPI data
reserve setup_data: [mem 0x00000000d991f000-0x00000000d9a09fff] ACPI NVS
reserve setup_data: [mem 0x00000000d9a0a000-0x00000000d9ffefff] reserved
reserve setup_data: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
reserve setup_data: [mem 0x00000000dc000000-0x00000000de1fffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000021fdfffff] usable
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xd9905000 ACPI 2.0=0xd9905000 SMBIOS=0xd9f7e498 MPS=0xf4ea0
secureboot: Secure boot disabled
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP ProDesk 600 G1 SFF/18E7, BIOS L01 v02.65 07/13/2015
tsc: Fast TSC calibration using PIT
tsc: Detected 3292.558 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FE0000000 write-back
2 base 00E0000000 mask 7FE0000000 uncachable
3 base 00DC000000 mask 7FFC000000 uncachable
4 base 021FE00000 mask 7FFFE00000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 8126M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 0G
e820: update [mem 0xdc000000-0xffffffff] usable ==> reserved
last_pfn = 0xda000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4e90-0x000f4e9f]
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x3cab2000-0x3fffdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000D9905000 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000D9905090 00009C (v01 HPQOEM SLIC-BPC 20150713 AMI 00010013)
ACPI: FACP 0x00000000D9913000 00010C (v05 HPQOEM SLIC-BPC 20150713 AMI 00010013)
ACPI: DSDT 0x00000000D99051B8 00DE46 (v02 HPQOEM SLIC-BPC 00000001 INTL 20091112)
ACPI: FACS 0x00000000D9A08080 000040
ACPI: APIC 0x00000000D9913110 000072 (v03 HPQOEM SLIC-BPC 20150713 AMI 00010013)
ACPI: FPDT 0x00000000D9913188 000044 (v01 HPQOEM SLIC-BPC 20150713 AMI 00010013)
ACPI: SSDT 0x00000000D99131D0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 0x00000000D9913710 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: SSDT 0x00000000D99141E8 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20120711)
ACPI: MCFG 0x00000000D99143B0 00003C (v01 HPQOEM SLIC-BPC 20150713 MSFT 00000097)
ACPI: HPET 0x00000000D99143F0 000038 (v01 HPQOEM SLIC-BPC 20150713 AMI. 00000005)
ACPI: SSDT 0x00000000D9914428 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 0x00000000D9914798 00348C (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: SSDT 0x00000000D9917C28 00668F (v01 COMPAQ WMI 00000001 MSFT 03000001)
ACPI: SLIC 0x00000000D991E2B8 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
ACPI: MSDM 0x00000000D991E430 000055 (v03 HPQOEM SLIC-BPC 20150713 HPQ 00010013)
ACPI: ASF! 0x00000000D991E488 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: TCPA 0x00000000D991E530 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
NODE_DATA(0) allocated [mem 0x21fdd3000-0x21fdfdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021fdfffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000004efff]
node 0: [mem 0x0000000000050000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000c6901fff]
node 0: [mem 0x00000000c6909000-0x00000000c6d4dfff]
node 0: [mem 0x00000000c7103000-0x00000000d9874fff]
node 0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
node 0: [mem 0x0000000100000000-0x000000021fdfffff]
Zeroed struct page in unavailable ranges: 28074 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
On node 0 totalpages: 2069078
DMA zone: 64 pages used for memmap
DMA zone: 39 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13843 pages used for memmap
DMA32 zone: 885946 pages, LIFO batch:63
Normal zone: 18424 pages used for memmap
Normal zone: 1179136 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0xdc200000-0xde1fffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0004f000-0x0004ffff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xc6482000-0xc6482fff]
PM: Registered nosave memory: [mem 0xc6491000-0xc6491fff]
PM: Registered nosave memory: [mem 0xc6492000-0xc6492fff]
PM: Registered nosave memory: [mem 0xc64a2000-0xc64a2fff]
PM: Registered nosave memory: [mem 0xc6902000-0xc6908fff]
PM: Registered nosave memory: [mem 0xc6d4e000-0xc7102fff]
PM: Registered nosave memory: [mem 0xd9875000-0xd98fefff]
PM: Registered nosave memory: [mem 0xd98ff000-0xd991efff]
PM: Registered nosave memory: [mem 0xd991f000-0xd9a09fff]
PM: Registered nosave memory: [mem 0xd9a0a000-0xd9ffefff]
PM: Registered nosave memory: [mem 0xda000000-0xdbffffff]
PM: Registered nosave memory: [mem 0xdc000000-0xde1fffff]
PM: Registered nosave memory: [mem 0xde200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xde200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 2036708
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7737276K/8276312K available (14339K kernel code, 2398K rwdata, 4956K rodata, 2716K init, 4988K bss, 539036K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 44527 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f75d63626d, max_idle_ns: 440795300200 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.11 BogoMIPS (lpj=13170232)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
SRBDS: Mitigation: Microcode
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (26340.46 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xc6902000-0xc6908fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xd991f000-0xd9a09fff] (962560 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 11:16:24, date: 2021-01-22
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1611314184.032:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 7 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9A12961F3400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9A12961DE800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9A129634A000 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xde200000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7c40000-0xf7c4000f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7]
pci 0000:00:16.3: reg 0x14: [mem 0xf7c3e000-0xf7c3efff]
pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7c3d000-0xf7c3dfff]
pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8c4c] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0004f000-0x0004ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0xc6482018-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc6492018-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc6902000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc6d4e000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xd9875000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: can't evaluate _CRS: 12311
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a20-0x0a3f] has been reserved
system 00:04: [io 0x0a10-0x0a1f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:0a: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0xde200000-0xfeafffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 23838 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 23419 usecs
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 54576K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xc2482000-0xc6482000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: No BGRT, not showing boot graphics
efifb: framebuffer at 0xe0000000, using 1876k, total 1875k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4.1 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial 0000:00:16.3: enabling device (0000 -> 0003)
0000:00:16.3: ttyS4 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: TPM is disabled/deactivated (0x7)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c3c000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-53-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-53-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-53-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-53-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb: port power management may be unreliable
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x306c3, pf=0x2, revision=0x28
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (581222564, 258623)->(585201178, -3719991)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: eb955faf7c22797fadc5b822779862097cf478a9'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Hewlett-Packard UEFI Secure Boot DB Key: e7203ac28b848d3c03432f6a485dd1f4c7b8e529'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: Allocated hash algorithm: sha1
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 5:507:277
tty tty14: hash matches
rtc_cmos 00:02: setting system clock to 2021-01-22T11:16:25 UTC (1611314185)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2716K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1188K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
usb 1-1: new high-speed USB device number 2 using ehci-pci
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20190816/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRL) (20190816/utaddress-204)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20190816/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRL) (20190816/utaddress-204)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20190816/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
i801_smbus 0000:00:1f.3: SPD Write Disable is set
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-3: new low-speed USB device number 2 using xhci_hcd
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 25
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a200 irq 25
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 3-3: New USB device found, idVendor=03f0, idProduct=094a, bcdDevice= 1.00
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: HP USB Optical Mouse
usb 3-3: Manufacturer: PixArt
usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 50:65:f3:2d:82:04
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 eno1: renamed from eth0
usb 3-4: new full-speed USB device number 3 using xhci_hcd
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: ST500DM002-1BD142, HP74, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD14 HP74 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: ATAPI: hp DVD A DS8ACSH, LHS3, max UDMA/133
ata3.00: configured for UDMA/133
scsi 2:0:0:0: CD-ROM hp DVD A DS8ACSH LHS3 PQ: 0 ANSI: 5
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
usb 3-4: New USB device found, idVendor=03f0, idProduct=104a, bcdDevice= 2.03
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=7
usb 3-4: Product: HP USB Smartcard CCID Keyboard
usb 3-4: Manufacturer: Chicony
usb 3-4: SerialNumber: 15071400001744
tsc: Refined TSC clocksource calibration: 3292.359 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f751a264d3, max_idle_ns: 440795279180 ns
clocksource: Switched to clocksource tsc
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:03F0:094A.0001/input/input5
hid-generic 0003:03F0:094A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.0-3/input0
input: Chicony HP USB Smartcard CCID Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:03F0:104A.0002/input/input6
hid-generic 0003:03F0:104A.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony HP USB Smartcard CCID Keyboard] on usb-0000:00:14.0-4/input0
input: Chicony HP USB Smartcard CCID Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:03F0:104A.0003/input/input7
input: Chicony HP USB Smartcard CCID Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:03F0:104A.0003/input/input8
hid-generic 0003:03F0:104A.0003: input,hidraw2: USB HID v1.10 Device [Chicony HP USB Smartcard CCID Keyboard] on usb-0000:00:14.0-4/input2
raid6: avx2x4 gen() 32349 MB/s
raid6: avx2x4 xor() 19456 MB/s
raid6: avx2x2 gen() 27673 MB/s
raid6: avx2x2 xor() 17398 MB/s
raid6: avx2x1 gen() 24442 MB/s
raid6: avx2x1 xor() 16482 MB/s
raid6: sse2x4 gen() 17614 MB/s
raid6: sse2x4 xor() 11227 MB/s
raid6: sse2x2 gen() 14884 MB/s
raid6: sse2x2 xor() 9817 MB/s
raid6: sse2x1 gen() 12729 MB/s
raid6: sse2x1 xor() 8881 MB/s
raid6: using algorithm avx2x4 gen() 32349 MB/s
raid6: .... xor() 19456 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
Btrfs loaded, crc32c=crc32c-intel
fbcon: Taking over console
Console: switching to colour frame buffer device 100x37
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/rpc-statd.service:16: PIDFile= references a path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on RPCbind Server Activation Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting NFSD configuration filesystem...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Started Journal Service.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
lp: driver loaded but no devices found
systemd-journald[325]: Received client request to flush runtime journal.
ppdev: user-space parallel port driver
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
input: HP WMI hotkeys as /devices/virtual/input/input9
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
checking generic (e0000000 1d5000) vs hw (e0000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 200x56
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
intel_rapl_common: RAPL package-0 domain package locked by BIOS
intel_rapl_common: RAPL package-0 domain dram locked by BIOS
snd_hda_intel 0000:00:03.0: enabling device (0100 -> 0102)
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_intel 0000:00:1b.0: enabling device (0100 -> 0102)
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC221: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a
snd_hda_codec_realtek hdaudioC1D0: Line=0x1b
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
audit: type=1400 audit(1611314205.607:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=567 comm="apparmor_parser"
audit: type=1400 audit(1611314205.607:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=568 comm="apparmor_parser"
audit: type=1400 audit(1611314205.607:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=568 comm="apparmor_parser"
audit: type=1400 audit(1611314205.863:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=569 comm="apparmor_parser"
audit: type=1400 audit(1611314205.879:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=570 comm="apparmor_parser"
audit: type=1400 audit(1611314206.007:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=794 comm="apparmor_parser"
audit: type=1400 audit(1611314206.007:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=795 comm="apparmor_parser"
audit: type=1400 audit(1611314206.011:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=796 comm="apparmor_parser"
audit: type=1400 audit(1611314206.011:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=796 comm="apparmor_parser"
audit: type=1400 audit(1611314206.011:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=796 comm="apparmor_parser"
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3292359491 Hz
vboxdrv: Successfully loaded version 6.1.8 (interface 0x002d0001)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
kauditd_printk_skb: 49 callbacks suppressed
audit: type=1400 audit(1611314224.951:61): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1083 comm="cups-browsed" capability=23 capname="sys_nice"
NFSD: Using UMH upcall client tracking operations.
NFSD: starting 90-second grace period (net f0000098)
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
usb 4-5: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 4-5: New USB device found, idVendor=1058, idProduct=2626, bcdDevice=10.28
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-5: Product: My Passport 2626
usb 4-5: Manufacturer: Western Digital
usb 4-5: SerialNumber: 575841314543393945413356
usb-storage 4-5:1.0: USB Mass Storage device detected
scsi host6: usb-storage 4-5:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 6:0:0:0: Direct-Access WD My Passport 2626 1028 PQ: 0 ANSI: 6
scsi 6:0:0:1: Enclosure WD SES Device 1028 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg2 type 0
scsi 6:0:0:1: Attached scsi generic sg3 type 13
sd 6:0:0:0: [sdb] Spinning up disk...
.
scsi 6:0:0:1: Wrong diagnostic page; asked for 1 got 8
scsi 6:0:0:1: Failed to get diagnostic page 0x1
scsi 6:0:0:1: Failed to bind enclosure -19
ready
sd 6:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI disk
ses 6:0:0:1: Attached Enclosure device
rfkill: input handler disabled
rfkill: input handler enabled
rfkill: input handler disabled
audit: type=1400 audit(1611317380.676:62): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/etc/dconf/profile/user" pid=4110 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
audit: type=1400 audit(1611317380.676:63): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/etc/dconf/profile/user" pid=4108 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
audit: type=1400 audit(1611317380.676:65): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/etc/dconf/db/local" pid=4110 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
audit: type=1400 audit(1611317380.676:64): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/etc/dconf/db/local" pid=4108 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
audit: type=1400 audit(1611318361.034:66): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/etc/dconf/profile/user" pid=5044 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
audit: type=1400 audit(1611318361.034:67): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/etc/dconf/db/local" pid=5044 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
audit: type=1400 audit(1611318468.119:68): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/etc/dconf/profile/user" pid=5209 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
audit: type=1400 audit(1611318468.119:69): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/etc/dconf/db/local" pid=5209 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
audit: type=1400 audit(1611318483.234:70): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/etc/dconf/profile/user" pid=5274 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
audit: type=1400 audit(1611318483.234:71): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/etc/dconf/db/local" pid=5274 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
audit: type=1400 audit(1611318624.343:72): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/etc/dconf/profile/user" pid=5493 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
audit: type=1400 audit(1611318624.343:73): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/etc/dconf/db/local" pid=5493 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
audit: type=1400 audit(1611318626.443:74): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/zoneinfo-icu/44/le/zoneinfo64.res" pid=5493 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
audit: type=1400 audit(1611318626.443:75): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/zoneinfo-icu/44/le/timezoneTypes.res" pid=5493 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0