dmesg - 800-low
microcode: microcode updated early to revision 0xde, date = 2020-05-25
Linux version 5.4.0-53-generic (buildd@lcy01-amd64-007) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #59-Ubuntu SMP Wed Oct 21 09:38:44 UTC 2020 (Ubuntu 5.4.0-53.59-generic 5.4.65)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000005efff] usable
BIOS-e820: [mem 0x000000000005f000-0x000000000005ffff] reserved
BIOS-e820: [mem 0x0000000000060000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000080d51fff] usable
BIOS-e820: [mem 0x0000000080d52000-0x0000000080d52fff] ACPI NVS
BIOS-e820: [mem 0x0000000080d53000-0x0000000080d53fff] reserved
BIOS-e820: [mem 0x0000000080d54000-0x0000000088d68fff] usable
BIOS-e820: [mem 0x0000000088d69000-0x00000000891c6fff] reserved
BIOS-e820: [mem 0x00000000891c7000-0x0000000089243fff] ACPI data
BIOS-e820: [mem 0x0000000089244000-0x00000000896d5fff] ACPI NVS
BIOS-e820: [mem 0x00000000896d6000-0x0000000089ffefff] reserved
BIOS-e820: [mem 0x0000000089fff000-0x0000000089ffffff] usable
BIOS-e820: [mem 0x000000008a000000-0x000000008f7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000026e7fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x7ec72018-0x7ec82057] usable ==> usable
e820: update [mem 0x7ec72018-0x7ec82057] usable ==> usable
e820: update [mem 0x7ec61018-0x7ec71e57] usable ==> usable
e820: update [mem 0x7ec61018-0x7ec71e57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000005efff] usable
reserve setup_data: [mem 0x000000000005f000-0x000000000005ffff] reserved
reserve setup_data: [mem 0x0000000000060000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000007ec61017] usable
reserve setup_data: [mem 0x000000007ec61018-0x000000007ec71e57] usable
reserve setup_data: [mem 0x000000007ec71e58-0x000000007ec72017] usable
reserve setup_data: [mem 0x000000007ec72018-0x000000007ec82057] usable
reserve setup_data: [mem 0x000000007ec82058-0x0000000080d51fff] usable
reserve setup_data: [mem 0x0000000080d52000-0x0000000080d52fff] ACPI NVS
reserve setup_data: [mem 0x0000000080d53000-0x0000000080d53fff] reserved
reserve setup_data: [mem 0x0000000080d54000-0x0000000088d68fff] usable
reserve setup_data: [mem 0x0000000088d69000-0x00000000891c6fff] reserved
reserve setup_data: [mem 0x00000000891c7000-0x0000000089243fff] ACPI data
reserve setup_data: [mem 0x0000000089244000-0x00000000896d5fff] ACPI NVS
reserve setup_data: [mem 0x00000000896d6000-0x0000000089ffefff] reserved
reserve setup_data: [mem 0x0000000089fff000-0x0000000089ffffff] usable
reserve setup_data: [mem 0x000000008a000000-0x000000008f7fffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000026e7fffff] usable
efi: EFI v2.70 by American Megatrends
efi: ACPI 2.0=0x891e0000 ACPI=0x891e0000 SMBIOS=0x89d41000 SMBIOS 3.0=0x89d40000 MPS=0xfcb10 ESRT=0x856f3f98 MEMATTR=0x8557f018
secureboot: Secure boot disabled
SMBIOS 3.1.1 present.
DMI: APD ALDA/B360M D3H-CF, BIOS F10 AP 09/25/2018
tsc: Detected 3700.000 MHz processor
tsc: Detected 3699.850 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x26e800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 base 008C000000 mask 7FFC000000 uncachable
4 base 008B000000 mask 7FFF000000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x8a000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcd00-0x000fcd0f]
esrt: Reserving ESRT space from 0x00000000856f3f98 to 0x00000000856f3fd0.
e820: update [mem 0x856f3000-0x856f3fff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x3cab2000-0x3fffdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000891E0000 000024 (v02 APD )
ACPI: XSDT 0x00000000891E00B0 0000DC (v01 APD GrupoAPD 01072009 AMI 00010013)
ACPI: FACP 0x000000008921EC28 000114 (v06 APD GrupoAPD 01072009 AMI 00010013)
ACPI: DSDT 0x00000000891E0218 03EA10 (v02 APD GrupoAPD 01072009 INTL 20160527)
ACPI: FACS 0x00000000896D5080 000040
ACPI: APIC 0x000000008921ED40 000084 (v04 APD GrupoAPD 01072009 AMI 00010013)
ACPI: FPDT 0x000000008921EDC8 000044 (v01 APD GrupoAPD 01072009 AMI 00010013)
ACPI: FIDT 0x000000008921EE10 00009C (v01 APD GrupoAPD 01072009 AMI 00010013)
ACPI: MCFG 0x000000008921EEB0 00003C (v01 APD GrupoAPD 01072009 MSFT 00000097)
ACPI: SSDT 0x000000008921EEF0 000204 (v01 APD GrupoAPD 00001000 INTL 20160527)
ACPI: SSDT 0x000000008921F0F8 0017D5 (v02 APD GrupoAPD 00003000 INTL 20160527)
ACPI: MSDM 0x00000000892208D0 000055 (v03 APD GrupoAPD 01072009 AMI 00010013)
ACPI: SSDT 0x0000000089220928 007BBB (v01 APD GrupoAPD 00000001 INTL 20160527)
ACPI: SSDT 0x00000000892284E8 0031C7 (v02 APD GrupoAPD 00003000 INTL 20160527)
ACPI: HPET 0x000000008922B6B0 000038 (v01 APD GrupoAPD 00000002 01000013)
ACPI: SSDT 0x000000008922B6E8 001BE1 (v02 APD GrupoAPD 00001000 INTL 20160527)
ACPI: SSDT 0x000000008922D2D0 000F9E (v02 APD GrupoAPD 00001000 INTL 20160527)
ACPI: SSDT 0x000000008922E270 002D1B (v02 APD GrupoAPD 00000000 INTL 20160527)
ACPI: UEFI 0x0000000089230F90 000048 (v01 APD GrupoAPD 00000002 01000013)
ACPI: LPIT 0x0000000089230FD8 00005C (v01 APD GrupoAPD 00000002 01000013)
ACPI: SSDT 0x0000000089231038 0027DE (v02 APD GrupoAPD 00001000 INTL 20160527)
ACPI: SSDT 0x0000000089233818 000FFE (v02 APD GrupoAPD 00000000 INTL 20160527)
ACPI: DBGP 0x0000000089234818 000034 (v01 APD GrupoAPD 00000002 01000013)
ACPI: DBG2 0x0000000089234850 000054 (v00 APD GrupoAPD 00000002 01000013)
ACPI: DMAR 0x00000000892348A8 0000A8 (v01 APD GrupoAPD 00000002 01000013)
ACPI: BGRT 0x0000000089234950 000038 (v01 APD GrupoAPD 01072009 AMI 00010013)
ACPI: WSMT 0x0000000089234988 000028 (v01 APD GrupoAPD 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000026e7fffff]
NODE_DATA(0) allocated [mem 0x26e7d5000-0x26e7fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000026e7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000005efff]
node 0: [mem 0x0000000000060000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000080d51fff]
node 0: [mem 0x0000000080d54000-0x0000000088d68fff]
node 0: [mem 0x0000000089fff000-0x0000000089ffffff]
node 0: [mem 0x0000000100000000-0x000000026e7fffff]
Zeroed struct page in unavailable ranges: 35578 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000026e7fffff]
On node 0 totalpages: 2061574
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8694 pages used for memmap
DMA32 zone: 556392 pages, LIFO batch:63
Normal zone: 23456 pages used for memmap
Normal zone: 1501184 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x8b800000-0x8f7fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x8490a000-0x84a69fff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0005f000-0x0005ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7ec61000-0x7ec61fff]
PM: Registered nosave memory: [mem 0x7ec71000-0x7ec71fff]
PM: Registered nosave memory: [mem 0x7ec72000-0x7ec72fff]
PM: Registered nosave memory: [mem 0x7ec82000-0x7ec82fff]
PM: Registered nosave memory: [mem 0x80d52000-0x80d52fff]
PM: Registered nosave memory: [mem 0x80d53000-0x80d53fff]
PM: Registered nosave memory: [mem 0x8490a000-0x84a69fff]
PM: Registered nosave memory: [mem 0x856f3000-0x856f3fff]
PM: Registered nosave memory: [mem 0x88d69000-0x891c6fff]
PM: Registered nosave memory: [mem 0x891c7000-0x89243fff]
PM: Registered nosave memory: [mem 0x89244000-0x896d5fff]
PM: Registered nosave memory: [mem 0x896d6000-0x89ffefff]
PM: Registered nosave memory: [mem 0x8a000000-0x8f7fffff]
PM: Registered nosave memory: [mem 0x8f800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x8f800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 2029334
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7863124K/8246296K available (14339K kernel code, 2398K rwdata, 4956K rodata, 2716K init, 4988K bss, 383172K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 44527 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x00000089ad4000 end: 0x00000089d1dfff
DMAR: RMRR base: 0x0000008b000000 end: 0x0000008f7fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa99074b1c, max_idle_ns: 881590506587 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7399.70 BogoMIPS (lpj=14799400)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
SRBDS: Mitigation: Microcode
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Pentium(R) Gold G5400 CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xa)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2
MDS CPU bug present and SMT on, data leak possible. See for more details.
#3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (29598.80 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x80d52000-0x80d52fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x89244000-0x896d5fff] (4792320 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 11:13:37, date: 2021-01-22
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1611314017.032:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
KVM setup pv remote TLB flush
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 10 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9544E478B000 00078C (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9544E4512800 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9544E44B4E00 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9544E478E800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9544E4B68000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9544E4510000 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9544E4512000 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [PAUD] (on)
ACPI: Power Resource [SPR0] (off)
ACPI: Power Resource [SPR1] (off)
ACPI: Power Resource [ZPDR] (off)
ACPI: Power Resource [V0PR] (on)
ACPI: Power Resource [V1PR] (on)
ACPI: Power Resource [V2PR] (on)
ACPI: Power Resource [PXTC] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: Power Resource [PIN] (off)
ACPI: Power Resource [SPR2] (off)
ACPI: Power Resource [SPR3] (off)
ACPI: Power Resource [SPR5] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x8f800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3e0f] type 00 class 0x060000
pci 0000:00:02.0: [8086:3e90] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
pci 0000:00:12.0: reg 0x10: [mem 0xa113d000-0xa113dfff 64bit]
pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xa1120000-0xa112ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0xa1136000-0xa1137fff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0xa113c000-0xa113cfff 64bit]
pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xa113b000-0xa113bfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xa1134000-0xa1135fff]
pci 0000:00:17.0: reg 0x14: [mem 0xa113a000-0xa113a0ff]
pci 0000:00:17.0: reg 0x18: [io 0x3090-0x3097]
pci 0000:00:17.0: reg 0x1c: [io 0x3080-0x3083]
pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:17.0: reg 0x24: [mem 0xa1139000-0xa11397ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.3: [8086:a333] type 01 class 0x060400
pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.3: PTM enabled (root), 4ns granularity
pci 0000:00:1f.0: [8086:a308] type 00 class 0x060100
pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xa1130000-0xa1133fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xa1000000-0xa10fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xa1138000-0xa11380ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xa1100000-0xa111ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
acpiphp: Slot [1] registered
pci 0000:00:1d.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1283:8892] type 01 class 0x060401
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1d.3: PCI bridge to [bus 02-03]
pci_bus 0000:03: extended config space not accessible
pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0005f000-0x0005ffff]
e820: reserve RAM buffer [mem 0x7ec61018-0x7fffffff]
e820: reserve RAM buffer [mem 0x7ec72018-0x7fffffff]
e820: reserve RAM buffer [mem 0x80d52000-0x83ffffff]
e820: reserve RAM buffer [mem 0x8490a000-0x87ffffff]
e820: reserve RAM buffer [mem 0x856f3000-0x87ffffff]
e820: reserve RAM buffer [mem 0x88d69000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8a000000-0x8bffffff]
e820: reserve RAM buffer [mem 0x26e800000-0x26fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: [io 0x0a40-0x0a4f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0x164e-0x164f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x1800-0x18fe] could not be reserved
system 00:07: [mem 0xfd000000-0xfd69ffff] has been reserved
system 00:07: [mem 0xfd6c0000-0xfd6cffff] has been reserved
system 00:07: [mem 0xfd6f0000-0xfdffffff] has been reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe200000-0xfe7fffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x2000-0x20fe] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1d.0: PCI bridge to [bus 01]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:00:1d.3: PCI bridge to [bus 02-03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x8f800000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Initramfs unpacking failed: Decoding failed
Freeing initrd memory: 54576K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x7ac61000-0x7ec61000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:1d.3: AER: enabled with IRQ 123
pcieport 0000:00:1d.3: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0x90000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
tsc: Refined TSC clocksource calibration: 3695.992 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d176e6b0, max_idle_ns: 881590797436 ns
clocksource: Switched to clocksource tsc
ACPI: Invalid passive threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ10] (17 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ00] (28 C)
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-53-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-53-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: registered as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x906ea, pf=0x2, revision=0xde
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (3019377650, 524488)->(3024789860, -4887722)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: eb955faf7c22797fadc5b822779862097cf478a9'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 5:954:226
acpi device:73: hash matches
rtc_cmos 00:04: setting system clock to 2021-01-22T11:13:40 UTC (1611314020)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2716K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1188K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
ahci 0000:00:17.0: version 3.0
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139100 irq 125
ata2: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139180 irq 125
ata3: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139200 irq 125
ata4: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139280 irq 125
ata5: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139300 irq 125
ata6: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139380 irq 125
usb 1-7: new low-speed USB device number 2 using xhci_hcd
usb 1-7: New USB device found, idVendor=04f2, idProduct=0116, bcdDevice= 2.00
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: USB Keyboard
usb 1-7: Manufacturer: CHICONY
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: TOSHIBA DT01ACA050, MS1OA750, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA0 A750 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: ATAPI: ATAPI iHAS124 F, CL9N, max UDMA/133
ata2.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM ATAPI iHAS124 F CL9N PQ: 0 ANSI: 5
ata6: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
usb 1-8: new low-speed USB device number 3 using xhci_hcd
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) e0:d5:5e:df:7d:96
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 eno1: renamed from eth0
sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 1-8: New USB device found, idVendor=04f2, idProduct=0939, bcdDevice= 1.00
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-8: Product: USB Optical Mouse
usb 1-8: Manufacturer: PixArt
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:04F2:0116.0001/input/input3
hid-generic 0003:04F2:0116.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-7/input0
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:04F2:0939.0002/input/input4
hid-generic 0003:04F2:0939.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-8/input0
raid6: sse2x4 gen() 18921 MB/s
raid6: sse2x4 xor() 11783 MB/s
raid6: sse2x2 gen() 16434 MB/s
raid6: sse2x2 xor() 10708 MB/s
raid6: sse2x1 gen() 13244 MB/s
raid6: sse2x1 xor() 9598 MB/s
raid6: using algorithm sse2x4 gen() 18921 MB/s
raid6: .... xor() 11783 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 20000.000 MB/sec
generic_sse: 19327.000 MB/sec
xor: using function: prefetch64-sse (20000.000 MB/sec)
async_tx: api initialized (async)
Btrfs loaded, crc32c=crc32c-intel
fbcon: Taking over console
Console: switching to colour frame buffer device 128x48
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/rpc-statd.service:16: PIDFile= references a path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on RPCbind Server Activation Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting NFSD configuration filesystem...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: Started Journal Service.
systemd-journald[320]: Received client request to flush runtime journal.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
parport_pc 00:01: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
audit: type=1400 audit(1611314035.856:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=444 comm="apparmor_parser"
audit: type=1400 audit(1611314035.856:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=444 comm="apparmor_parser"
audit: type=1400 audit(1611314035.888:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=446 comm="apparmor_parser"
audit: type=1400 audit(1611314035.928:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=443 comm="apparmor_parser"
audit: type=1400 audit(1611314035.996:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=447 comm="apparmor_parser"
audit: type=1400 audit(1611314036.004:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=448 comm="apparmor_parser"
audit: type=1400 audit(1611314036.004:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=445 comm="apparmor_parser"
audit: type=1400 audit(1611314036.060:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=451 comm="apparmor_parser"
audit: type=1400 audit(1611314036.064:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=449 comm="apparmor_parser"
audit: type=1400 audit(1611314036.064:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=449 comm="apparmor_parser"
EDAC ie31200: No ECC support
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
kauditd_printk_skb: 47 callbacks suppressed
audit: type=1400 audit(1611314040.948:59): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.mysql-workbench-community.mysql-workbench-community" pid=518 comm="apparmor_parser"
audit: type=1400 audit(1611314040.988:60): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.hook.configure" pid=548 comm="apparmor_parser"
cryptd: max_cpu_qlen set to 1000
SSE version of gcm_enc/dec engaged.
checking generic (90000000 300000) vs hw (90000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3695983003 Hz
vboxdrv: Successfully loaded version 6.1.8 (interface 0x002d0001)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
audit: type=1400 audit(1611314056.208:61): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1045 comm="cups-browsed" capability=23 capname="sys_nice"
NFSD: Using UMH upcall client tracking operations.
NFSD: starting 90-second grace period (net f00000a8)
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
rfkill: input handler disabled
rfkill: input handler enabled
rfkill: input handler disabled
usb 2-4: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 2-4: New USB device found, idVendor=0480, idProduct=0901, bcdDevice= 0.00
usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-4: Product: External USB 3.0
usb 2-4: Manufacturer: TOSHIBA
usb 2-4: SerialNumber: 20200129028756F
usb-storage 2-4:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-4:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 6:0:0:0: Direct-Access TOSHIBA External USB 3.0 0 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] Spinning up disk...
...ready
sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI disk
usb 2-4: USB disconnect, device number 2
sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
sd 6:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 74 70 5f 80 00 00 08 00
blk_update_request: I/O error, dev sdb, sector 1953521536 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
blk_update_request: I/O error, dev sdb, sector 1953521536 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Buffer I/O error on dev sdb1, logical block 244189936, async page read
sd 6:0:0:0: [sdb] Synchronizing SCSI cache
sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK