dmesg - serverWriteR4F4

Return To serverWriteR4F4 System Information

microcode: microcode updated early to revision 0x1f, date = 2018-05-08
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-957.el7.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-36) (GCC) ) #1 SMP Thu Nov 8 23:39:32 UTC 2018
Command line: BOOT_IMAGE=/vmlinuz-3.10.0-957.el7.x86_64 root=/dev/mapper/centos_azvdi01-root ro crashkernel=auto rd.lvm.lv=centos_azvdi01/root rd.lvm.lv=centos_azvdi01/swap rhgb quiet LANG=ko_KR.UTF-8
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000df62efff] usable
BIOS-e820: [mem 0x00000000df62f000-0x00000000df63bfff] ACPI data
BIOS-e820: [mem 0x00000000df63c000-0x00000000df63cfff] usable
BIOS-e820: [mem 0x00000000df63d000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000141fffefff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: HP ProLiant DL380 G7, BIOS P67 05/05/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x141ffff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 00E0000000 mask FFE0000000 uncachable
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
PAT configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- UC  
e820: last_pfn = 0xdf63d max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffffffffff200f80]
Base memory trampoline at [ffff912400099000] 99000 size 24576
Using GB pages for direct mapping
BRK [0xd08c52000, 0xd08c52fff] PGTABLE
BRK [0xd08c53000, 0xd08c53fff] PGTABLE
BRK [0xd08c54000, 0xd08c54fff] PGTABLE
BRK [0xd08c55000, 0xd08c55fff] PGTABLE
BRK [0xd08c56000, 0xd08c56fff] PGTABLE
BRK [0xd08c57000, 0xd08c57fff] PGTABLE
BRK [0xd08c58000, 0xd08c58fff] PGTABLE
BRK [0xd08c59000, 0xd08c59fff] PGTABLE
RAMDISK: [mem 0x33c46000-0x35e1afff]
Early table checksum verification disabled
ACPI: RSDP 00000000000f4f00 00024 (v02 HP    )
ACPI: XSDT 00000000df630340 000B4 (v01 HP     ProLiant 00000002   \xffffffd2? 0000162E)
ACPI: FACP 00000000df630440 000F4 (v03 HP     ProLiant 00000002   \xffffffd2? 0000162E)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20130517/tbfadt-672)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20130517/tbfadt-672)
ACPI: DSDT 00000000df630540 020BD (v01 HP         DSDT 00000001 INTL 20030228)
ACPI: FACS 00000000df62f100 00040
ACPI: SPCR 00000000df62f140 00050 (v01 HP     SPCRRBSU 00000001   \xffffffd2? 0000162E)
ACPI: MCFG 00000000df62f1c0 0003C (v01 HP     ProLiant 00000001      00000000)
ACPI: HPET 00000000df62f200 00038 (v01 HP     ProLiant 00000002   \xffffffd2? 0000162E)
ACPI: FFFF 00000000df62f240 00064 (v02 HP     ProLiant 00000002   \xffffffd2? 0000162E)
ACPI: SPMI 00000000df62f2c0 00040 (v05 HP     ProLiant 00000001   \xffffffd2? 0000162E)
ACPI: ERST 00000000df62f300 001D0 (v01 HP     ProLiant 00000001   \xffffffd2? 0000162E)
ACPI: APIC 00000000df62f500 0015E (v01 HP     ProLiant 00000002      00000000)
ACPI: SRAT 00000000df62f680 00570 (v01 HP     Proliant 00000001   \xffffffd2? 0000162E)
ACPI: FFFF 00000000df62fc00 00176 (v01 HP     ProLiant 00000001   \xffffffd2? 0000162E)
ACPI: BERT 00000000df62fd80 00030 (v01 HP     ProLiant 00000001   \xffffffd2? 0000162E)
ACPI: HEST 00000000df62fdc0 000BC (v01 HP     ProLiant 00000001   \xffffffd2? 0000162E)
ACPI: DMAR 00000000df62fe80 0015E (v01 HP     ProLiant 00000001   \xffffffd2? 0000162E)
ACPI: SSDT 00000000df632600 00125 (v03     HP  CRSPCI0 00000002   HP 00000001)
ACPI: SSDT 00000000df632740 00255 (v03     HP  riser1a 00000002 INTL 20061109)
ACPI: SSDT 00000000df6329c0 003BB (v01     HP      pcc 00000001 INTL 20090625)
ACPI: SSDT 00000000df632d80 00377 (v01     HP     pmab 00000001 INTL 20090625)
ACPI: SSDT 00000000df633100 04104 (v01  INTEL PPM RCM  00000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 1 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x25 -> Node 1
SRAT: PXM 1 -> APIC 0x30 -> Node 1
SRAT: PXM 1 -> APIC 0x31 -> Node 1
SRAT: PXM 1 -> APIC 0x32 -> Node 1
SRAT: PXM 1 -> APIC 0x33 -> Node 1
SRAT: PXM 1 -> APIC 0x34 -> Node 1
SRAT: PXM 1 -> APIC 0x35 -> Node 1
SRAT: Node 0 PXM 0 [mem 0x00000000-0xdfffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0xa1fffffff]
SRAT: Node 1 PXM 1 [mem 0xa20000000-0x141fffffff]
NUMA: Node 0 [mem 0x00000000-0xdfffffff] + [mem 0x100000000-0xa1fffffff] -> [mem 0x00000000-0xa1fffffff]
NODE_DATA(0) allocated [mem 0xa1ffd9000-0xa1fffffff]
NODE_DATA(1) allocated [mem 0x141ffd8000-0x141fffefff]
Reserving 165MB of memory at 656MB for crashkernel (System RAM: 81909MB)
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x141fffefff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0xdf62efff]
  node   0: [mem 0xdf63c000-0xdf63cfff]
  node   0: [mem 0x100000000-0xa1fffffff]
  node   1: [mem 0xa20000000-0x141fffefff]
Initmem setup node 0 [mem 0x00001000-0xa1fffffff]
On node 0 totalpages: 10483150
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 14233 pages used for memmap
  DMA32 zone: 910896 pages, LIFO batch:31
  Normal zone: 149504 pages used for memmap
  Normal zone: 9568256 pages, LIFO batch:31
Initmem setup node 1 [mem 0xa20000000-0x141fffefff]
On node 1 totalpages: 10485759
  Normal zone: 163840 pages used for memmap
  Normal zone: 10485759 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 32 CPUs, 8 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdf62f000-0xdf63bfff]
PM: Registered nosave memory: [mem 0xdf63d000-0xe3ffffff]
PM: Registered nosave memory: [mem 0xe4000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfee0ffff]
PM: Registered nosave memory: [mem 0xfee10000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0xe4000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 38 pages/cpu @ffff912df7a00000 s118784 r8192 d28672 u262144
pcpu-alloc: s118784 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 [0] 16 18 20 22 24 26 28 30 
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 [1] 17 19 21 23 25 27 29 31 
Built 2 zonelists in Zone order, mobility grouping on.  Total pages: 20641247
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-957.el7.x86_64 root=/dev/mapper/centos_azvdi01-root ro crashkernel=auto rd.lvm.lv=centos_azvdi01/root rd.lvm.lv=centos_azvdi01/swap rhgb quiet LANG=ko_KR.UTF-8
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 7584624k/84410364k available (7664k kernel code, 534728k absent, 1604840k reserved, 6055k data, 1876k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2
x86/pti: Unmapping kernel while in userspace
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=32.
NR_IRQS:327936 nr_irqs:1088 0
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 335544320 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2665.885 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5331.77 BogoMIPS (lpj=2665885)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Yama: becoming mindful.
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
Initializing cgroup subsys net_prio
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
FEATURE SPEC_CTRL Present
FEATURE IBPB_SUPPORT Present
Spectre V2 : Mitigation: Full retpoline
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 29185 entries in 115 pages
DMAR-IR: This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable.  To maintain system stability
interrupt remapping is being disabled.  Please
contact your BIOS vendor for an update
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU           X5650  @ 2.67GHz (fam: 06, model: 2c, stepping: 02)
Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
core: CPUID marked event: 'bus cycles' unavailable
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node   1, Processors  #1 OK
smpboot: Booting Node   0, Processors  #2 OK
smpboot: Booting Node   1, Processors  #3 OK
smpboot: Booting Node   0, Processors  #4 OK
smpboot: Booting Node   1, Processors  #5 OK
smpboot: Booting Node   0, Processors  #6 OK
smpboot: Booting Node   1, Processors  #7 OK
smpboot: Booting Node   0, Processors  #8 OK
smpboot: Booting Node   1, Processors  #9 OK
smpboot: Booting Node   0, Processors  #10 OK
smpboot: Booting Node   1, Processors  #11 OK
smpboot: Booting Node   0, Processors  #12 OK
smpboot: Booting Node   1, Processors  #13 OK
smpboot: Booting Node   0, Processors  #14 OK
smpboot: Booting Node   1, Processors  #15 OK
smpboot: Booting Node   0, Processors  #16 OK
smpboot: Booting Node   1, Processors  #17 OK
smpboot: Booting Node   0, Processors  #18 OK
smpboot: Booting Node   1, Processors  #19 OK
smpboot: Booting Node   0, Processors  #20 OK
smpboot: Booting Node   1, Processors  #21 OK
smpboot: Booting Node   0, Processors  #22 OK
smpboot: Booting Node   1, Processors  #23
Brought up 24 CPUs
smpboot: Max logical packages: 3
smpboot: Total of 24 processors activated (127957.15 BogoMIPS)
node 0 initialised, 8879401 pages in 260ms
node 1 initialised, 9792142 pages in 285ms
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
atomic64 test passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time:  1:52:52, date: 10/27/20
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
PCI: HP ProLiant DL380 detected, enabling pci=bfsort.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1a])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff window]; [mem 0xfed00000-0xfed44fff window] ignored
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xe7000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [io  0x1000-0x5fff window]
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0x0fff window]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03bb window]
pci_bus 0000:00: root bus resource [io  0x03c0-0x03df window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [bus 00-1a]
pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:340b] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:340c] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [8086:340d] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:340f] type 01 class 0x060400
pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: [8086:3411] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0d.0: [8086:343a] type 00 class 0x060000
pci 0000:00:0d.1: [8086:343b] type 00 class 0x060000
pci 0000:00:0d.2: [8086:343c] type 00 class 0x060000
pci 0000:00:0d.3: [8086:343d] type 00 class 0x060000
pci 0000:00:0d.4: [8086:3418] type 00 class 0x060000
pci 0000:00:0d.5: [8086:3419] type 00 class 0x060000
pci 0000:00:0d.6: [8086:341a] type 00 class 0x060000
pci 0000:00:0e.0: [8086:341c] type 00 class 0x060000
pci 0000:00:0e.1: [8086:341d] type 00 class 0x060000
pci 0000:00:0e.2: [8086:341e] type 00 class 0x060000
pci 0000:00:0e.3: [8086:341f] type 00 class 0x060000
pci 0000:00:0e.4: [8086:3439] type 00 class 0x060000
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0x1000-0x101f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0x1020-0x103f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0x1040-0x105f]
pci 0000:00:1d.3: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io  0x1060-0x107f]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf1bf0000-0xf1bf03ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io  0x1080-0x1087]
pci 0000:00:1f.2: reg 0x14: [io  0x1088-0x108b]
pci 0000:00:1f.2: reg 0x18: [io  0x1090-0x1097]
pci 0000:00:1f.2: reg 0x1c: [io  0x1098-0x109b]
pci 0000:00:1f.2: reg 0x20: [io  0x10a0-0x10af]
pci 0000:00:1f.2: reg 0x24: [io  0x10b0-0x10bf]
pci 0000:05:00.0: [103c:323a] type 00 class 0x010400
pci 0000:05:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit]
pci 0000:05:00.0: reg 0x18: [mem 0xfbbf0000-0xfbbf0fff 64bit]
pci 0000:05:00.0: reg 0x20: [io  0x4000-0x40ff]
pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:05:00.0: PME# supported from D0
pci 0000:00:01.0: PCI bridge to [bus 05]
pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:01.0:   bridge window [mem 0xfbb00000-0xfbdfffff]
pci 0000:00:02.0: PCI bridge to [bus 06]
pci 0000:00:03.0: PCI bridge to [bus 11-13]
pci 0000:00:04.0: PCI bridge to [bus 14]
pci 0000:00:05.0: PCI bridge to [bus 15-17]
pci 0000:00:06.0: PCI bridge to [bus 18-1a]
pci 0000:00:07.0: PCI bridge to [bus 0e-10]
pci 0000:0b:00.0: [1077:2432] type 00 class 0x0c0400
pci 0000:0b:00.0: reg 0x10: [io  0x5000-0x50ff]
pci 0000:0b:00.0: reg 0x14: [mem 0xfbff0000-0xfbff3fff 64bit]
pci 0000:0b:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
pci 0000:00:08.0: PCI bridge to [bus 0b-0d]
pci 0000:00:08.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:08.0:   bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:09.0: PCI bridge to [bus 08-0a]
pci 0000:00:0a.0: PCI bridge to [bus 07]
pci 0000:03:00.0: [14e4:1639] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xf4000000-0xf5ffffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: [14e4:1639] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xf2000000-0xf3ffffff 64bit]
pci 0000:03:00.1: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0:   bridge window [mem 0xf2000000-0xf5ffffff]
pci 0000:04:00.0: [14e4:1639] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: [14e4:1639] type 00 class 0x020000
pci 0000:04:00.1: reg 0x10: [mem 0xf6000000-0xf7ffffff 64bit]
pci 0000:04:00.1: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:02:00.0: [103c:3306] type 00 class 0x088000
pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
pci 0000:02:00.0: reg 0x14: [mem 0xf1ff0000-0xf1ff01ff]
pci 0000:02:00.0: reg 0x18: [io  0x3400-0x34ff]
pci 0000:02:00.2: [103c:3307] type 00 class 0x088000
pci 0000:02:00.2: reg 0x10: [io  0x3800-0x38ff]
pci 0000:02:00.2: reg 0x14: [mem 0xf1fe0000-0xf1fe00ff]
pci 0000:02:00.2: reg 0x18: [mem 0xf1e00000-0xf1efffff]
pci 0000:02:00.2: reg 0x1c: [mem 0xf1d80000-0xf1dfffff]
pci 0000:02:00.2: reg 0x20: [mem 0xf1d70000-0xf1d77fff]
pci 0000:02:00.2: reg 0x24: [mem 0xf1d60000-0xf1d67fff]
pci 0000:02:00.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
pci 0000:02:00.4: [103c:3300] type 00 class 0x0c0300
pci 0000:02:00.4: reg 0x20: [io  0x3c00-0x3c1f]
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.4:   bridge window [mem 0xf1d00000-0xf1ffffff]
pci 0000:01:03.0: [1002:515e] type 00 class 0x030000
pci 0000:01:03.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
pci 0000:01:03.0: reg 0x14: [io  0x2000-0x20ff]
pci 0000:01:03.0: reg 0x18: [mem 0xf1cf0000-0xf1cfffff]
pci 0000:01:03.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1e.0:   bridge window [mem 0xf1c00000-0xf1cfffff]
pci 0000:00:1e.0:   bridge window [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:00:1e.0:   bridge window [mem 0xe7000000-0xfbffffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x1000-0x5fff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0x0fff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed00000-0xfed44fff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03bb window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03c0-0x03df window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:03.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3e
PCI: root bus 3e: using default resources
PCI: Probing PCI hardware (bus 3e)
PCI host bridge to bus 0000:3e
pci_bus 0000:3e: root bus resource [io  0x0000-0xffff]
pci_bus 0000:3e: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:3e: No busn resource found for root bus, will use [bus 3e-ff]
pci 0000:3e:00.0: [8086:2c70] type 00 class 0x060000
pci 0000:3e:00.1: [8086:2d81] type 00 class 0x060000
pci 0000:3e:02.0: [8086:2d90] type 00 class 0x060000
pci 0000:3e:02.1: [8086:2d91] type 00 class 0x060000
pci 0000:3e:02.2: [8086:2d92] type 00 class 0x060000
pci 0000:3e:02.3: [8086:2d93] type 00 class 0x060000
pci 0000:3e:02.4: [8086:2d94] type 00 class 0x060000
pci 0000:3e:02.5: [8086:2d95] type 00 class 0x060000
pci 0000:3e:03.0: [8086:2d98] type 00 class 0x060000
pci 0000:3e:03.1: [8086:2d99] type 00 class 0x060000
pci 0000:3e:03.2: [8086:2d9a] type 00 class 0x060000
pci 0000:3e:03.4: [8086:2d9c] type 00 class 0x060000
pci 0000:3e:04.0: [8086:2da0] type 00 class 0x060000
pci 0000:3e:04.1: [8086:2da1] type 00 class 0x060000
pci 0000:3e:04.2: [8086:2da2] type 00 class 0x060000
pci 0000:3e:04.3: [8086:2da3] type 00 class 0x060000
pci 0000:3e:05.0: [8086:2da8] type 00 class 0x060000
pci 0000:3e:05.1: [8086:2da9] type 00 class 0x060000
pci 0000:3e:05.2: [8086:2daa] type 00 class 0x060000
pci 0000:3e:05.3: [8086:2dab] type 00 class 0x060000
pci 0000:3e:06.0: [8086:2db0] type 00 class 0x060000
pci 0000:3e:06.1: [8086:2db1] type 00 class 0x060000
pci 0000:3e:06.2: [8086:2db2] type 00 class 0x060000
pci 0000:3e:06.3: [8086:2db3] type 00 class 0x060000
pci_bus 0000:3e: busn_res: [bus 3e-ff] end is updated to 3e
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci 0000:3f:00.0: [8086:2c70] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2d81] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2d90] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2d91] type 00 class 0x060000
pci 0000:3f:02.2: [8086:2d92] type 00 class 0x060000
pci 0000:3f:02.3: [8086:2d93] type 00 class 0x060000
pci 0000:3f:02.4: [8086:2d94] type 00 class 0x060000
pci 0000:3f:02.5: [8086:2d95] type 00 class 0x060000
pci 0000:3f:03.0: [8086:2d98] type 00 class 0x060000
pci 0000:3f:03.1: [8086:2d99] type 00 class 0x060000
pci 0000:3f:03.2: [8086:2d9a] type 00 class 0x060000
pci 0000:3f:03.4: [8086:2d9c] type 00 class 0x060000
pci 0000:3f:04.0: [8086:2da0] type 00 class 0x060000
pci 0000:3f:04.1: [8086:2da1] type 00 class 0x060000
pci 0000:3f:04.2: [8086:2da2] type 00 class 0x060000
pci 0000:3f:04.3: [8086:2da3] type 00 class 0x060000
pci 0000:3f:05.0: [8086:2da8] type 00 class 0x060000
pci 0000:3f:05.1: [8086:2da9] type 00 class 0x060000
pci 0000:3f:05.2: [8086:2daa] type 00 class 0x060000
pci 0000:3f:05.3: [8086:2dab] type 00 class 0x060000
pci 0000:3f:06.0: [8086:2db0] type 00 class 0x060000
pci 0000:3f:06.1: [8086:2db1] type 00 class 0x060000
pci 0000:3f:06.2: [8086:2db2] type 00 class 0x060000
pci 0000:3f:06.3: [8086:2db3] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
e820: reserve RAM buffer [mem 0xdf62f000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf63d000-0xdfffffff]
e820: reserve RAM buffer [mem 0x141ffff000-0x141fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io  0x0408-0x040f] has been reserved
system 00:00: [io  0x04d0-0x04d1] has been reserved
system 00:00: [io  0x0700-0x071f] has been reserved
system 00:00: [io  0x0880-0x08ff] has been reserved
system 00:00: [io  0x0900-0x097f] has been reserved
system 00:00: [io  0x0cd4-0x0cd7] has been reserved
system 00:00: [io  0x0cd0-0x0cd3] has been reserved
system 00:00: [io  0x0f50-0x0f58] has been reserved
system 00:00: [io  0x0ca0-0x0ca1] has been reserved
system 00:00: [io  0x0ca4-0x0ca5] has been reserved
system 00:00: [io  0x02f8-0x02ff] has been reserved
system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xe7ffe000-0xe7ffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 5 devices
ACPI: bus type PNP unregistered
pci 0000:05:00.0: BAR 6: assigned [mem 0xfbb00000-0xfbb7ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 05]
pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:01.0:   bridge window [mem 0xfbb00000-0xfbdfffff]
pci 0000:00:02.0: PCI bridge to [bus 06]
pci 0000:00:03.0: PCI bridge to [bus 11-13]
pci 0000:00:04.0: PCI bridge to [bus 14]
pci 0000:00:05.0: PCI bridge to [bus 15-17]
pci 0000:00:06.0: PCI bridge to [bus 18-1a]
pci 0000:00:07.0: PCI bridge to [bus 0e-10]
pci 0000:0b:00.0: BAR 6: assigned [mem 0xfbf00000-0xfbf3ffff pref]
pci 0000:00:08.0: PCI bridge to [bus 0b-0d]
pci 0000:00:08.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:08.0:   bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:09.0: PCI bridge to [bus 08-0a]
pci 0000:00:0a.0: PCI bridge to [bus 07]
pci 0000:03:00.0: BAR 6: no space for [mem size 0x00010000 pref]
pci 0000:03:00.0: BAR 6: failed to assign [mem size 0x00010000 pref]
pci 0000:03:00.1: BAR 6: no space for [mem size 0x00010000 pref]
pci 0000:03:00.1: BAR 6: failed to assign [mem size 0x00010000 pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0:   bridge window [mem 0xf2000000-0xf5ffffff]
pci 0000:04:00.0: BAR 6: no space for [mem size 0x00010000 pref]
pci 0000:04:00.0: BAR 6: failed to assign [mem size 0x00010000 pref]
pci 0000:04:00.1: BAR 6: no space for [mem size 0x00010000 pref]
pci 0000:04:00.1: BAR 6: failed to assign [mem size 0x00010000 pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:02:00.2: BAR 6: assigned [mem 0xf1d00000-0xf1d0ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.4:   bridge window [mem 0xf1d00000-0xf1ffffff]
pci 0000:01:03.0: BAR 6: assigned [mem 0xf1c00000-0xf1c1ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 01]
pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1e.0:   bridge window [mem 0xf1c00000-0xf1cfffff]
pci 0000:00:1e.0:   bridge window [mem 0xe8000000-0xefffffff 64bit pref]
pci_bus 0000:00: resource 4 [mem 0xe7000000-0xfbffffff window]
pci_bus 0000:00: resource 5 [io  0x1000-0x5fff window]
pci_bus 0000:00: resource 6 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 7 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 8 [io  0x0d00-0x0fff window]
pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed44fff window]
pci_bus 0000:00: resource 10 [io  0x03b0-0x03bb window]
pci_bus 0000:00: resource 11 [io  0x03c0-0x03df window]
pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbdfffff]
pci_bus 0000:0b: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:0b: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf5ffffff]
pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf9ffffff]
pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xf1d00000-0xf1ffffff]
pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xf1c00000-0xf1cfffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff 64bit pref]
pci_bus 0000:01: resource 4 [mem 0xe7000000-0xfbffffff window]
pci_bus 0000:01: resource 5 [io  0x1000-0x5fff window]
pci_bus 0000:01: resource 6 [io  0x0000-0x03af window]
pci_bus 0000:01: resource 7 [io  0x03e0-0x0cf7 window]
pci_bus 0000:01: resource 8 [io  0x0d00-0x0fff window]
pci_bus 0000:01: resource 9 [mem 0xfed00000-0xfed44fff window]
pci_bus 0000:01: resource 10 [io  0x03b0-0x03bb window]
pci_bus 0000:01: resource 11 [io  0x03c0-0x03df window]
pci_bus 0000:01: resource 12 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:3e: resource 4 [io  0x0000-0xffff]
pci_bus 0000:3e: resource 5 [mem 0x00000000-0xffffffffff]
pci_bus 0000:3f: resource 4 [io  0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
pci 0000:01:03.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 34644k freed
DMAR: Host address width 39
DMAR: DRHD base: 0x000000e7ffe000 flags: 0x1
DMAR: dmar0: reg_base_addr e7ffe000 ver 1:0 cap c90780106f0462 ecap f0207e
DMAR: RMRR base: 0x000000df7fc000 end: 0x000000df7fdfff
DMAR: RMRR base: 0x000000df7f5000 end: 0x000000df7fafff
DMAR: RMRR base: 0x000000df63e000 end: 0x000000df63ffff
DMAR: ATSR flags: 0x0
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdb62f000-0xdf62f000] (64MB) mapped at [ffff9124db62f000-ffff9124df62efff]
sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
futex hash table entries: 8192 (order: 7, 524288 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1603763572.145:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
Key type big_key registered
SELinux:  Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x2C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
ERST: Failed to get Error Log Address Range.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 20, io mem 0xf1bf0000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-957.el7.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-957.el7.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001020
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-957.el7.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.0-957.el7.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.10.0-957.el7.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:02:00.4: UHCI Host Controller
uhci_hcd 0000:02:00.4: new USB bus registered, assigned bus number 6
uhci_hcd 0000:02:00.4: detected 8 ports
uhci_hcd 0000:02:00.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:02:00.4: irq 17, io base 0x00003c00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.10.0-957.el7.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:02:00.4
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: sig=0x206c2, pf=0x1, revision=0x1f
microcode: Microcode Update Driver: v2.01 , Peter Oruba
PM: Hibernation image not present or could not be loaded.
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: b70dcf0df2d9b7f29159248249fd6fe87b781427'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass! (rc=-19)
  Magic number: 8:496:863
cpuid cpu23: hash matches
processor cpu23: hash matches
rtc_cmos 00:04: setting system clock to 2020-10-27 01:52:53 UTC (1603763573)
Freeing unused kernel memory: 1876k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 516k freed
Freeing unused kernel memory: 600k freed
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Timers.
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Reached target Local File Systems.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Reached target Sockets.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Journal Service...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Journal Service.
usb 6-1: new full-speed USB device number 2 using uhci_hcd
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.1-ioctl (2018-04-03) initialised: dm-devel@redhat.com
usb 6-1: New USB device found, idVendor=03f0, idProduct=7029
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: Virtual Keyboard 
usb 6-1: Manufacturer: HP 
input: HP  Virtual Keyboard  as /devices/pci0000:00/0000:00:1c.4/0000:02:00.4/usb6/6-1/6-1:1.0/input/input1
HP HPSA Driver (v 3.4.20-125-RH1)
hpsa 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
hpsa 0000:05:00.0: irq 28 for MSI/MSI-X
hpsa 0000:05:00.0: irq 29 for MSI/MSI-X
hpsa 0000:05:00.0: irq 30 for MSI/MSI-X
hpsa 0000:05:00.0: irq 31 for MSI/MSI-X
hpsa 0000:05:00.0: irq 32 for MSI/MSI-X
hpsa 0000:05:00.0: irq 33 for MSI/MSI-X
hpsa 0000:05:00.0: irq 34 for MSI/MSI-X
hpsa 0000:05:00.0: irq 35 for MSI/MSI-X
hpsa 0000:05:00.0: irq 36 for MSI/MSI-X
hpsa 0000:05:00.0: irq 37 for MSI/MSI-X
hpsa 0000:05:00.0: irq 38 for MSI/MSI-X
hpsa 0000:05:00.0: irq 39 for MSI/MSI-X
hpsa 0000:05:00.0: irq 40 for MSI/MSI-X
hpsa 0000:05:00.0: irq 41 for MSI/MSI-X
hpsa 0000:05:00.0: irq 42 for MSI/MSI-X
hpsa 0000:05:00.0: irq 43 for MSI/MSI-X
hpsa 0000:05:00.0: Logical aborts not supported
hpsa 0000:05:00.0: HP SSD Smart Path aborts not supported
bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014)
bnx2 0000:03:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f4000000, IRQ 16, node addr 44:1e:a1:38:02:c0
hid-generic 0003:03F0:7029.0001: input,hidraw0: USB HID v1.01 Keyboard [HP  Virtual Keyboard ] on usb-0000:02:00.4-1/input0
bnx2 0000:03:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f2000000, IRQ 17, node addr 44:1e:a1:38:02:c2
bnx2 0000:04:00.0 eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 18, node addr 44:1e:a1:38:02:c4
input: HP  Virtual Keyboard  as /devices/pci0000:00/0000:00:1c.4/0000:02:00.4/usb6/6-1/6-1:1.1/input/input2
bnx2 0000:04:00.1 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f6000000, IRQ 19, node addr 44:1e:a1:38:02:c6
hid-generic 0003:03F0:7029.0002: input,hidraw1: USB HID v1.01 Mouse [HP  Virtual Keyboard ] on usb-0000:02:00.4-1/input1
scsi host0: hpsa
hpsa can't handle SMP requests
hpsa 0000:05:00.0: scsi 0:0:0:0: added RAID              HP       P410i            controller SSDSmartPathCap- En- Exp=1
hpsa 0000:05:00.0: scsi 0:0:1:0: masked Direct-Access     ATA      HP SSD S700 Pro  PHYS DRV SSDSmartPathCap- En- Exp=0
hpsa 0000:05:00.0: scsi 0:0:2:0: masked Direct-Access     ATA      HP SSD S700 Pro  PHYS DRV SSDSmartPathCap- En- Exp=0
hpsa 0000:05:00.0: scsi 0:0:3:0: masked Direct-Access     HP       EG0300FBDBR      PHYS DRV SSDSmartPathCap- En- Exp=0
hpsa 0000:05:00.0: scsi 0:0:4:0: masked Direct-Access     HP       EG0300FBDBR      PHYS DRV SSDSmartPathCap- En- Exp=0
hpsa 0000:05:00.0: scsi 0:0:5:0: masked Direct-Access     HP       EG0300FBDBR      PHYS DRV SSDSmartPathCap- En- Exp=0
hpsa 0000:05:00.0: scsi 0:0:6:0: masked Direct-Access     HP       EG0300FBDBR      PHYS DRV SSDSmartPathCap- En- Exp=0
hpsa 0000:05:00.0: scsi 0:0:7:0: masked Direct-Access     HP       DG0146FARVU      PHYS DRV SSDSmartPathCap- En- Exp=0
hpsa 0000:05:00.0: scsi 0:0:8:0: masked Enclosure         PMCSIERA  SRC 8x6G        enclosure SSDSmartPathCap- En- Exp=0
hpsa 0000:05:00.0: scsi 0:1:0:0: added Direct-Access     HP       LOGICAL VOLUME   RAID-0 SSDSmartPathCap- En- Exp=1
hpsa 0000:05:00.0: scsi 0:1:0:1: added Direct-Access     HP       LOGICAL VOLUME   RAID-1(+0) SSDSmartPathCap- En- Exp=1
hpsa 0000:05:00.0: scsi 0:1:0:2: added Direct-Access     HP       LOGICAL VOLUME   RAID-1(+0) SSDSmartPathCap- En- Exp=1
hpsa 0000:05:00.0: scsi 0:1:0:3: added Direct-Access     HP       LOGICAL VOLUME   RAID-1(+0) SSDSmartPathCap- En- Exp=1
hpsa 0000:05:00.0: scsi 0:1:0:4: added Direct-Access     HP       LOGICAL VOLUME   RAID-0 SSDSmartPathCap- En- Exp=1
hpsa can't handle SMP requests
scsi 0:0:0:0: RAID              HP       P410i            5.06 PQ: 0 ANSI: 5
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
 P0 P2 P1 P3 ]
scsi 0:1:0:0: Direct-Access     HP       LOGICAL VOLUME   5.06 PQ: 0 ANSI: 5
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.06.07.6-k.
qla2xxx [0000:0b:00.0]-001d: : Found an ISP2432 irq 44 iobase 0xffffa7e74ce3c000.
qla2xxx [0000:0b:00.0]-0034:1: MSI-X: Unsupported ISP 2432 SSVID/SSDID (0x103C,0x7040).
scsi 0:1:0:1: Direct-Access     HP       LOGICAL VOLUME   5.06 PQ: 0 ANSI: 5
scsi host2: ata_piix
scsi host3: ata_piix
ata1: SATA max UDMA/133 cmd 0x1080 ctl 0x1088 bmdma 0x10a0 irq 17
ata2: SATA max UDMA/133 cmd 0x1090 ctl 0x1098 bmdma 0x10a8 irq 17
tsc: Refined TSC clocksource calibration: 2665.908 MHz
Switched to clocksource tsc
scsi host1: qla2xxx
qla2xxx [0000:0b:00.0]-00fb:1: QLogic HPAE311A - PCI-Express 4Gb Fibre Channel HBA.
qla2xxx [0000:0b:00.0]-00fc:1: ISP2432: PCIe (2.5GT/s x4) @ 0000:0b:00.0 hdma+ host#=1 fw=8.07.00 (9496).
scsi 0:1:0:2: Direct-Access     HP       LOGICAL VOLUME   5.06 PQ: 0 ANSI: 5
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB 0x02).
radeon 0000:01:03.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (64M used)
radeon 0000:01:03.0: GTT: 512M 0x00000000C8000000 - 0x00000000E7FFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone  kernel: Available graphics memory: 41154230 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 64M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCI GART of 512M enabled (table at 0x0000000034F80000).
radeon 0000:01:03.0: WB disabled
radeon 0000:01:03.0: fence driver on ring 0 use gpu addr 0x00000000c8000000 and cpu addr 0xffff91243508f000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Loading R100 Microcode
[drm] radeon: ring at 0x00000000C8001000
[drm] ring test succeeded in 1 usecs
scsi 0:1:0:3: Direct-Access     HP       LOGICAL VOLUME   5.06 PQ: 0 ANSI: 5
scsi 0:1:0:4: Direct-Access     HP       LOGICAL VOLUME   5.06 PQ: 0 ANSI: 5
ata2.00: SATA link down (SStatus 4 SControl 300)
ata2.01: SATA link down (SStatus 4 SControl 300)
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link down (SStatus 4 SControl 300)
ata1.01: link offline, clearing class 3 to NONE
ata1.00: ATAPI: hp      DVD A  DS8A5LH, 1HE3, max UDMA/100
ata1.00: configured for UDMA/100
scsi: waiting for bus probes to complete ...
[drm] ib test succeeded in 0 usecs
[drm] No TV DAC info found in BIOS
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   VGA-1
[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm]   Encoders:
[drm]     CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm]   VGA-2
[drm]   DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[drm]   Encoders:
[drm]     CRT2: INTERNAL_DAC2
[drm] fb mappable at 0xE8040000
[drm] vram apper at 0xE8000000
[drm] size 1572864
[drm] fb depth is 16
[drm]    pitch is 2048
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
radeon 0000:01:03.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:01:03.0 on minor 0
scsi 2:0:0:0: CD-ROM            hp       DVD A  DS8A5LH   1HE3 PQ: 0 ANSI: 5
sd 0:1:0:0: [sda] 2000343728 512-byte logical blocks: (1.02 TB/953 GiB)
sd 0:1:0:0: [sda] 4096-byte physical blocks
sd 0:1:0:1: [sdb] 585871964 512-byte logical blocks: (299 GB/279 GiB)
sd 0:1:0:2: [sdc] 585871964 512-byte logical blocks: (299 GB/279 GiB)
sd 0:1:0:0: [sda] Write Protect is off
sd 0:1:0:0: [sda] Mode Sense: 6b 00 00 08
sd 0:1:0:3: [sdd] 286677120 512-byte logical blocks: (146 GB/136 GiB)
sd 0:1:0:1: [sdb] Write Protect is off
sd 0:1:0:1: [sdb] Mode Sense: 6b 00 00 08
sd 0:1:0:4: [sde] 2000343728 512-byte logical blocks: (1.02 TB/953 GiB)
sd 0:1:0:4: [sde] 4096-byte physical blocks
sd 0:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:1:0:1: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:1:0:2: [sdc] Write Protect is off
sd 0:1:0:2: [sdc] Mode Sense: 6b 00 00 08
sd 0:1:0:3: [sdd] Write Protect is off
sd 0:1:0:3: [sdd] Mode Sense: 6b 00 00 08
sd 0:1:0:4: [sde] Write Protect is off
sd 0:1:0:4: [sde] Mode Sense: 6b 00 00 08
sd 0:1:0:2: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:1:0:3: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:1:0:4: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:1:0:4: [sde] Attached SCSI disk
sd 0:1:0:0: [sda] Attached SCSI disk
sd 0:1:0:3: [sdd] Attached SCSI disk
sd 0:1:0:1: [sdb] Attached SCSI disk
sd 0:1:0:2: [sdc] Attached SCSI disk
sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
random: fast init done
random: crng init done
SGI XFS with ACLs, security attributes, no debug enabled
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Starting recovery (logdev: internal)
XFS (dm-0): Ending recovery (logdev: internal)
systemd-journald[214]: Received SIGTERM from PID 1 (systemd).
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1603763580.721:2): selinux=0 auid=4294967295 ses=4294967295
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
systemd-journald[3914]: Received request to flush runtime journal from PID 1
pcc-cpufreq: (v1.10.00) driver loaded with frequency limits: 1600 MHz, 2666 MHz
cpufreq: __cpufreq_add_dev: ->get() failed
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
ipmi message handler version 39.2
EDAC MC1: Giving out device to 'i7core_edac.c' 'i7 core #1': DEV 0000:3e:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3e:03.0' (POLLED)
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
EDAC PCI1: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
EDAC i7core: Driver loaded, 2 memory controller(s) found.
ipmi device interface
scsi 0:0:0:0: Attached scsi generic sg0 type 12
sd 0:1:0:0: Attached scsi generic sg1 type 0
sd 0:1:0:1: Attached scsi generic sg2 type 0
sd 0:1:0:2: Attached scsi generic sg3 type 0
sd 0:1:0:3: Attached scsi generic sg4 type 0
sd 0:1:0:4: Attached scsi generic sg5 type 0
sr 2:0:0:0: Attached scsi generic sg6 type 5
hpwdt 0000:02:00.0: HPE Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 1/ON)
hpwdt 0000:02:00.0: HPE Watchdog Timer Driver: 1.4.0-RH1, timer margin: 30 seconds (nowayout=0).
Floppy drive(s): fd0 is 1.44M
ACPI Warning: SystemIO range 0x0000000000000928-0x000000000000092f conflicts with OpRegion 0x0000000000000920-0x000000000000092f (\SGPE) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
IPMI System Interface driver.
ipmi_si ipmi_si.0: ipmi_platform: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
ipmi_si IPI0001:00: [io  0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si ipmi_si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_platform: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
(NULL device *): SPMI-specified kcs state machine: duplicate
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
input: PC Speaker as /devices/platform/pcspkr/input/input3
ipmi_si IPI0001:00: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13)
ipmi_si IPI0001:00: IPMI kcs interface initialized
IPMI SSIF Interface driver
cryptd: max_cpu_qlen set to 1000
XFS (sda1): Mounting V5 Filesystem
SSE version of gcm_enc/dec engaged.
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for __generic-gcm-aes-aesni (__driver-generic-gcm-aes-aesni)
XFS (sda1): Starting recovery (logdev: internal)
XFS (sda1): Ending recovery (logdev: internal)
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
gpio_ich: GPIO from 451 to 511 on gpio_ich
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
Adding 29298684k swap on /dev/mapper/centos_azvdi01-swap.  Priority:-2 extents:1 across:29298684k FS
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
floppy0: no floppy controllers found
type=1305 audit(1603763584.551:3): audit_pid=7615 old=0 auid=4294967295 ses=4294967295 res=1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
IPv6: ADDRCONF(NETDEV_UP): enp3s0f0: link is not ready
bnx2 0000:03:00.0: irq 45 for MSI/MSI-X
bnx2 0000:03:00.0: irq 46 for MSI/MSI-X
bnx2 0000:03:00.0: irq 47 for MSI/MSI-X
bnx2 0000:03:00.0: irq 48 for MSI/MSI-X
bnx2 0000:03:00.0: irq 49 for MSI/MSI-X
bnx2 0000:03:00.0: irq 50 for MSI/MSI-X
bnx2 0000:03:00.0: irq 51 for MSI/MSI-X
bnx2 0000:03:00.0: irq 52 for MSI/MSI-X
bnx2 0000:03:00.0: irq 53 for MSI/MSI-X
bnx2 0000:03:00.0 enp3s0f0: using MSIX
IPv6: ADDRCONF(NETDEV_UP): enp3s0f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready
bnx2 0000:03:00.1: irq 54 for MSI/MSI-X
bnx2 0000:03:00.1: irq 55 for MSI/MSI-X
bnx2 0000:03:00.1: irq 56 for MSI/MSI-X
bnx2 0000:03:00.1: irq 57 for MSI/MSI-X
bnx2 0000:03:00.1: irq 58 for MSI/MSI-X
bnx2 0000:03:00.1: irq 59 for MSI/MSI-X
bnx2 0000:03:00.1: irq 60 for MSI/MSI-X
bnx2 0000:03:00.1: irq 61 for MSI/MSI-X
bnx2 0000:03:00.1: irq 62 for MSI/MSI-X
bnx2 0000:03:00.1 enp3s0f1: using MSIX
IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp4s0f0: link is not ready
bnx2 0000:04:00.0: irq 63 for MSI/MSI-X
bnx2 0000:04:00.0: irq 64 for MSI/MSI-X
bnx2 0000:04:00.0: irq 65 for MSI/MSI-X
bnx2 0000:04:00.0: irq 66 for MSI/MSI-X
bnx2 0000:04:00.0: irq 67 for MSI/MSI-X
bnx2 0000:04:00.0: irq 68 for MSI/MSI-X
bnx2 0000:04:00.0: irq 69 for MSI/MSI-X
bnx2 0000:04:00.0: irq 70 for MSI/MSI-X
bnx2 0000:04:00.0: irq 71 for MSI/MSI-X
bnx2 0000:04:00.0 enp4s0f0: using MSIX
IPv6: ADDRCONF(NETDEV_UP): enp4s0f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp4s0f1: link is not ready
bnx2 0000:04:00.1: irq 72 for MSI/MSI-X
bnx2 0000:04:00.1: irq 73 for MSI/MSI-X
bnx2 0000:04:00.1: irq 74 for MSI/MSI-X
bnx2 0000:04:00.1: irq 75 for MSI/MSI-X
bnx2 0000:04:00.1: irq 76 for MSI/MSI-X
bnx2 0000:04:00.1: irq 77 for MSI/MSI-X
bnx2 0000:04:00.1: irq 78 for MSI/MSI-X
bnx2 0000:04:00.1: irq 79 for MSI/MSI-X
bnx2 0000:04:00.1: irq 80 for MSI/MSI-X
bnx2 0000:04:00.1 enp4s0f1: using MSIX
IPv6: ADDRCONF(NETDEV_UP): enp4s0f1: link is not ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
bnx2 0000:03:00.0 enp3s0f0: NIC Copper Link is Up, 1000 Mbps full duplex

IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0f0: link becomes ready
br0: port 1(enp3s0f0) entered blocking state
br0: port 1(enp3s0f0) entered disabled state
device enp3s0f0 entered promiscuous mode
br0: port 1(enp3s0f0) entered blocking state
br0: port 1(enp3s0f0) entered forwarding state
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and  for details.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
qla2xxx [0000:0b:00.0]-8038:1: Cable is unplugged...
fuse init (API version 7.22)
TCP: lp registered
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered forwarding state
perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3133 > 3126), lowering kernel.perf_event_max_sample_rate to 63000
perf: interrupt took too long (4412 > 3916), lowering kernel.perf_event_max_sample_rate to 45000
perf: interrupt took too long (5940 > 5515), lowering kernel.perf_event_max_sample_rate to 33000
perf: interrupt took too long (7804 > 7425), lowering kernel.perf_event_max_sample_rate to 25000
br0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entered disabled state
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered forwarding state
br0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entered disabled state
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered forwarding state
perf: interrupt took too long (9762 > 9755), lowering kernel.perf_event_max_sample_rate to 20000
br0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entered disabled state
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered forwarding state
UDP: bad checksum. From 192.168.0.22:137 to 192.168.0.255:137 ulen 76
UDP: bad checksum. From 192.168.0.22:137 to 192.168.0.255:137 ulen 76
UDP: bad checksum. From 192.168.0.22:137 to 192.168.0.255:137 ulen 76
UDP: bad checksum. From 192.168.0.22:137 to 192.168.0.255:137 ulen 76
UDP: bad checksum. From 192.168.0.22:137 to 192.168.0.255:137 ulen 76
UDP: bad checksum. From 192.168.0.22:137 to 192.168.0.255:137 ulen 76
UDP: bad checksum. From 192.168.0.22:137 to 192.168.0.255:137 ulen 76
UDP: bad checksum. From 192.168.0.22:137 to 192.168.0.255:137 ulen 76
UDP: bad checksum. From 192.168.0.22:137 to 192.168.0.255:137 ulen 76
UDP: bad checksum. From 192.168.0.22:137 to 192.168.0.255:137 ulen 76
br0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entered disabled state
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered forwarding state
br0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entered disabled state
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered forwarding state
br0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entered disabled state
EXT4-fs (dm-2): recovery complete
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered forwarding state
br0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entered disabled state
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered forwarding state
br0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entered disabled state
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-3): recovery complete
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered forwarding state
br0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entered disabled state
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered forwarding state
br0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entered disabled state
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered forwarding state
br0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entered disabled state
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered forwarding state
br0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entered disabled state
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered forwarding state
br0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entered disabled state

Return To serverWriteR4F4 System Information