dmesg - 2020-11-02_2315_Quadro_K2200

Return To 2020-11-02_2315_Quadro_K2200 System Information

Linux version 5.4.0-52-generic (buildd@lcy01-amd64-022) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #57~18.04.1-Ubuntu SMP Thu Oct 15 14:04:49 UTC 2020 (Ubuntu 5.4.0-52.57~18.04.1-generic 5.4.65)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Hygon HygonGenuine
  Centaur CentaurHauls
  zhaoxin   Shanghai  
x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000afeeffff] usable
BIOS-e820: [mem 0x00000000afef0000-0x00000000afef2fff] ACPI NVS
BIOS-e820: [mem 0x00000000afef3000-0x00000000afefffff] ACPI data
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000024fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: System manufacturer System Product Name/M2NPV-VM, BIOS ASUS M2NPV-VM ACPI BIOS Revision 5005 06/02/2010
tsc: Fast TSC calibration using PIT
tsc: Detected 2310.627 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
last_pfn = 0x250000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFE0000000 write-back
  2 base 0000A0000000 mask FFFFF0000000 write-back
  3 base 000100000000 mask FFFF00000000 write-back
  4 base 000200000000 mask FFFFC0000000 write-back
  5 base 000240000000 mask FFFFF0000000 write-back
  6 base 0000AFF00000 mask 00FFFFF00000 uncachable
  7 disabled
TOM2: 0000000250000000 aka 9472M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
mtrr: your BIOS has configured an incorrect mask, fixing it.
total RAM covered: 2815M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 2M 	num_reg: 4  	lose cover RAM: 0G
e820: update [mem 0xaff00000-0xffffffff] usable ==> reserved
last_pfn = 0xafef0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5aa0-0x000f5aaf]
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
RAMDISK: [mem 0x30585000-0x342b9fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F7640 000024 (v02 Nvidia)
ACPI: XSDT 0x00000000AFEF3100 00004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: FACP 0x00000000AFEF9E00 0000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20190816/tbfadt-569)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20190816/tbfadt-569)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20190816/tbfadt-569)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20190816/tbfadt-569)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 128/8 (20190816/tbfadt-569)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20190816/tbfadt-674)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20190816/tbfadt-674)
ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20190816/tbfadt-674)
ACPI: DSDT 0x00000000AFEF3280 006B1B (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000)
ACPI: FACS 0x00000000AFEF0000 000040
ACPI: FACS 0x00000000AFEF0000 000040
ACPI: SSDT 0x00000000AFEFA040 00088C (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
ACPI: HPET 0x00000000AFEFA940 000038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
ACPI: MCFG 0x00000000AFEFA9C0 00003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: APIC 0x00000000AFEF9F40 000098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000024fffffff]
NODE_DATA(0) allocated [mem 0x24ffd3000-0x24fffdfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000024fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000afeeffff]
  node   0: [mem 0x0000000100000000-0x000000024fffffff]
Zeroed struct page in unavailable ranges: 370 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000024fffffff]
On node 0 totalpages: 2096782
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 11196 pages used for memmap
  DMA32 zone: 716528 pages, LIFO batch:63
  Normal zone: 21504 pages used for memmap
  Normal zone: 1376256 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfefff000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xafef0000-0xafef2fff]
PM: Registered nosave memory: [mem 0xafef3000-0xafefffff]
PM: Registered nosave memory: [mem 0xaff00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[mem 0xaff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists, mobility grouping on.  Total pages: 2063997
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xa4000000-0xa5ffffff] (32MB)
Aperture pointing to e820 RAM. Ignoring.
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xa4000000-0xa7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xa4000000-0xa7ffffff]
Memory: 8015632K/8387128K available (14339K kernel code, 2379K rwdata, 4928K rodata, 2704K init, 5020K bss, 371496K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x41/0x550 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 44233 entries in 173 pages
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
	Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x214e6c1e54a, max_idle_ns: 440795230394 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4621.25 BogoMIPS (lpj=9242508)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD Athlon(tm) II X4 605e Processor (family: 0x10, model: 0x5, stepping: 0x3)
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
do_IRQ: 1.55 No irq handler for vector
 #2
do_IRQ: 2.55 No irq handler for vector
 #3
do_IRQ: 3.55 No irq handler for vector
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (18485.01 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xafef0000-0xafef2fff] (12288 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 21:14:40, date: 2020-11-02
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1604351680.140:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [d000, ffff]
TOM: 00000000b0000000 aka 2816M
Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [b0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e02fffff] ==> [e0100000, e02fffff]
TOM2: 0000000250000000 aka 9472M
bus: [bus 00-02] on node 0 link 0
bus: 00 [io  0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xb0000000-0xdfffffff]
bus: 00 [mem 0xe0300000-0xffffffff]
bus: 00 [mem 0xe0100000-0xe02fffff]
bus: 00 [mem 0x250000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.CPU0 (20190816/dspkginit-440)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 9 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xaff00000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [10de:02f0] type 00 class 0x050000
pci 0000:00:00.1: [10de:02fa] type 00 class 0x050000
pci 0000:00:00.2: [10de:02fe] type 00 class 0x050000
pci 0000:00:00.3: [10de:02f8] type 00 class 0x050000
pci 0000:00:00.4: [10de:02f9] type 00 class 0x050000
pci 0000:00:00.5: [10de:02ff] type 00 class 0x050000
pci 0000:00:00.6: [10de:027f] type 00 class 0x050000
pci 0000:00:00.7: [10de:027e] type 00 class 0x050000
pci 0000:00:04.0: [10de:02fb] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: [10de:0270] type 00 class 0x050000
pci 0000:00:0a.0: [10de:0260] type 00 class 0x060100
pci 0000:00:0a.1: [10de:0264] type 00 class 0x0c0500
pci 0000:00:0a.1: reg 0x20: [io  0x4c00-0x4c3f]
pci 0000:00:0a.1: reg 0x24: [io  0x4c40-0x4c7f]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.2: [10de:0272] type 00 class 0x050000
pci 0000:00:0b.0: [10de:026d] type 00 class 0x0c0310
pci 0000:00:0b.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: [10de:026e] type 00 class 0x0c0320
pci 0000:00:0b.1: reg 0x10: [mem 0xfe02e000-0xfe02e0ff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: [10de:0265] type 00 class 0x01018a
pci 0000:00:0d.0: reg 0x20: [io  0xfd00-0xfd0f]
pci 0000:00:0d.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:0d.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:0d.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:0d.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:0e.0: [10de:0266] type 00 class 0x010185
pci 0000:00:0e.0: reg 0x10: [io  0x09f0-0x09f7]
pci 0000:00:0e.0: reg 0x14: [io  0x0bf0-0x0bf3]
pci 0000:00:0e.0: reg 0x18: [io  0x0970-0x0977]
pci 0000:00:0e.0: reg 0x1c: [io  0x0b70-0x0b73]
pci 0000:00:0e.0: reg 0x20: [io  0xf800-0xf80f]
pci 0000:00:0e.0: reg 0x24: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:0f.0: [10de:0267] type 00 class 0x010185
pci 0000:00:0f.0: reg 0x10: [io  0x09e0-0x09e7]
pci 0000:00:0f.0: reg 0x14: [io  0x0be0-0x0be3]
pci 0000:00:0f.0: reg 0x18: [io  0x0960-0x0967]
pci 0000:00:0f.0: reg 0x1c: [io  0x0b60-0x0b63]
pci 0000:00:0f.0: reg 0x20: [io  0xf300-0xf30f]
pci 0000:00:0f.0: reg 0x24: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:10.0: [10de:026f] type 01 class 0x060401
pci 0000:00:10.1: [10de:026c] type 00 class 0x040300
pci 0000:00:10.1: reg 0x10: [mem 0xfe024000-0xfe027fff]
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:14.0: [10de:0269] type 00 class 0x068000
pci 0000:00:14.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:14.0: reg 0x14: [io  0xf200-0xf207]
pci 0000:00:14.0: supports D1 D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [10de:13ba] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xdc00-0xdc7f]
pci 0000:01:00.0: reg 0x30: [mem 0xfcf00000-0xfcf7ffff pref]
pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:04.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff]
pci 0000:00:04.0: ASPM: current common clock configuration is broken, reconfiguring
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:04.0:   bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:04.0:   bridge window [mem 0xb0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: extended config space not accessible
pci 0000:02:05.0: [104c:8023] type 00 class 0x0c0010
pci 0000:02:05.0: reg 0x10: [mem 0xfdeff000-0xfdeff7ff]
pci 0000:02:05.0: reg 0x14: [mem 0xfdef8000-0xfdefbfff]
pci 0000:02:05.0: supports D1 D2
pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:09.0: [168c:0023] type 00 class 0x028000
pci 0000:02:09.0: reg 0x10: [mem 0xfdee0000-0xfdeeffff]
pci 0000:00:10.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:10.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:10.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:10.0:   bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:00:10.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:10.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:10.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:10.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:10.0:   bridge window [mem 0xaff00000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
iommu: Default domain type: Translated 
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xafef0000-0xafffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet: 3 channels of 0 reserved for per-cpu timers
hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io  0x4000-0x407f] has been reserved
system 00:00: [io  0x4080-0x40ff] has been reserved
system 00:00: [io  0x4400-0x447f] has been reserved
system 00:00: [io  0x4480-0x44ff] has been reserved
system 00:00: [io  0x4800-0x487f] has been reserved
system 00:00: [io  0x4880-0x48ff] has been reserved
system 00:00: [io  0x2000-0x207f] has been reserved
system 00:00: [io  0x2080-0x20ff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0800-0x087f] has been reserved
system 00:01: [io  0x0290-0x0297] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x000f0000-0x000f3fff] could not be reserved
system 00:05: [mem 0x000f4000-0x000f7fff] could not be reserved
system 00:05: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:05: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:05: [mem 0xfefff000-0xfefff0ff] has been reserved
system 00:05: [mem 0xafef0000-0xafefffff] could not be reserved
system 00:05: [mem 0xffff0000-0xffffffff] has been reserved
system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:05: [mem 0x00100000-0xafeeffff] could not be reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:05: [mem 0xfefff000-0xfeffffff] could not be reserved
system 00:05: [mem 0xfff80000-0xfff80fff] has been reserved
system 00:05: [mem 0xfff90000-0xfffbffff] has been reserved
system 00:05: [mem 0xfffed000-0xfffeffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:04.0:   bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:04.0:   bridge window [mem 0xb0000000-0xcfffffff 64bit pref]
pci 0000:00:10.0: PCI bridge to [bus 02]
pci 0000:00:10.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:10.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:10.0:   bridge window [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xaff00000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
pci_bus 0000:01: resource 2 [mem 0xb0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:02: resource 8 [mem 0xaff00000-0xfebfffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:00.0: Found enabled HT MSI Mapping
PCI Interrupt Link [APCF] enabled at IRQ 23
pci 0000:00:0b.0: quirk_usb_early_handoff+0x0/0x6b0 took 28711 usecs
PCI Interrupt Link [APCL] enabled at IRQ 22
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0f.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.1: Enabling HT MSI Mapping
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 62676K
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ a4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xcf000000, mapped to 0x(____ptrval____), using 5120k, total 5120k
fbcon: Deferring console take-over
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Invalid passive threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:0b.1: EHCI Host Controller
ehci-pci 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:0b.1: debug port 1
ehci-pci 0000:00:0b.1: cache line size of 32 is not supported
ehci-pci 0000:00:0b.1: irq 22, io mem 0xfe02e000
ehci-pci 0000:00:0b.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-52-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:0b.0: OHCI PCI host controller
ohci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:0b.0: irq 23, io mem 0xfe02f000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 5.4.0-52-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:0b.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: microcode updated early to new patch_level=0x010000c8
microcode: CPU0: patch_level=0x010000c8
microcode: CPU1: patch_level=0x010000c8
microcode: CPU2: patch_level=0x010000c8
microcode: CPU3: patch_level=0x010000c8
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1686187200, 319198)->(1691173850, -4667452)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 5f49676ef65ecbfe465704c58c4397ea13118220'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM:   Magic number: 12:576:246
rtc_cmos 00:02: setting system clock to 2020-11-02T21:14:42 UTC (1604351682)
acpi_cpufreq: overriding BIOS provided _PSD data
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2704K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1216K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
Floppy drive(s): fd0 is 1.44M
ACPI Warning: SystemIO range 0x0000000000004C00-0x0000000000004C3F conflicts with OpRegion 0x0000000000004C00-0x0000000000004C05 (\_SB.PCI0.SM00) (20190816/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
i2c i2c-0: nForce2 SMBus adapter at 0x4c40
pata_amd 0000:00:0d.0: version 0.4.1
sata_nv 0000:00:0e.0: version 3.5
PCI Interrupt Link [APSI] enabled at IRQ 21
sata_nv 0000:00:0e.0: Using SWNCQ mode
scsi host1: sata_nv
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
PCI Interrupt Link [APCH] enabled at IRQ 20
scsi host0: pata_amd
scsi host3: pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15
ata1: port disabled--ignoring
ata2: port disabled--ignoring
scsi host2: sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 21
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 21
PCI Interrupt Link [APSJ] enabled at IRQ 23
sata_nv 0000:00:0f.0: Using SWNCQ mode
PCI Interrupt Link [APC4] enabled at IRQ 19
scsi host4: sata_nv
scsi host5: sata_nv
ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 23
ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 23
FDC 0 is a post-1991 82077
firewire_ohci 0000:02:05.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
ata5: SATA link down (SStatus 0 SControl 300)
usb 2-5: new full-speed USB device number 2 using ohci-pci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:17:31:80:8d:fa
forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
forcedeth 0000:00:14.0 enp0s20: renamed from eth0
ata3.00: ATA-9: INTEL SSDSC2BF180A4H, LH6i, max UDMA/133
ata3.00: 351651888 sectors, multi 1: LBA48 NCQ (depth 31/32)
firewire_core 0000:02:05.0: created device fw0: GUID 0011d80000c4b407, S400
ata3.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2BF18 LH6i PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/168 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
usb 2-5: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-5: Product: USB Receiver
usb 2-5: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
random: fast init done
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.0/0003:046D:C534.0001/input/input2
tsc: Refined TSC clocksource calibration: 2310.648 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x214e8028f23, max_idle_ns: 440795321343 ns
clocksource: Switched to clocksource tsc
hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:0b.0-5/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.1/0003:046D:C534.0002/input/input3
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.1/0003:046D:C534.0002/input/input4
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.1/0003:046D:C534.0002/input/input5
hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:0b.0-5/input1
logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:0b.0-5/input0
logitech-djreceiver 0003:046D:C534.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:0b.0-5/input1
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-9: WDC WD10JPVX-00JC3T0, 01.01A01, max UDMA/133
ata4.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD10JPVX-00J 1A01 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1
input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input8
input: Logitech Wireless Keyboard PID:4023 Consumer Control as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input9
input: Logitech Wireless Keyboard PID:4023 System Control as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input10
hid-generic 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:0b.0-5/input1:1
logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input15
hid-generic 0003:046D:4054.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:0b.0-5/input1:2
 sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
input: Logitech Wireless Keyboard PID:4023 as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input19
logitech-hidpp-device 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:0b.0-5/input1:1
input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input20
logitech-hidpp-device 0003:046D:4054.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:0b.0-5/input1:2
ata6: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice User and Session Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd-journald[347]: Received request to flush runtime journal from PID 1
PCI Interrupt Link [AAZA] enabled at IRQ 22
snd_hda_intel 0000:00:10.1: Disabling MSI
PCI Interrupt Link [APC6] enabled at IRQ 16
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
PCI Interrupt Link [APC2] enabled at IRQ 17
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR5416 MAC/BB Rev:2 AR2122 RF Rev:81 mem=0xffff9f37804e0000, irq=17
nvidia: module verification failed: signature and/or required key missing - tainting kernel
ath9k 0000:02:09.0 wlp2s9: renamed from wlan0
nvidia-nvlink: Nvlink Core is being initialized, major device number 238
PCI Interrupt Link [APC5] enabled at IRQ 16
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  450.80.02  Wed Sep 23 01:13:39 UTC 2020
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  450.80.02  Wed Sep 23 00:48:09 UTC 2020
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
nvidia-uvm: Loaded the UVM driver, major device number 236.
Adding 19998716k swap on /dev/sda1.  Priority:-2 extents:1 across:19998716k SSFS
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1604351688.203:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=596 comm="apparmor_parser"
audit: type=1400 audit(1604351688.203:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=596 comm="apparmor_parser"
audit: type=1400 audit(1604351688.207:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=600 comm="apparmor_parser"
audit: type=1400 audit(1604351688.207:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=600 comm="apparmor_parser"
audit: type=1400 audit(1604351688.207:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=600 comm="apparmor_parser"
audit: type=1400 audit(1604351688.211:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=597 comm="apparmor_parser"
audit: type=1400 audit(1604351688.211:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=597 comm="apparmor_parser"
audit: type=1400 audit(1604351688.211:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=597 comm="apparmor_parser"
audit: type=1400 audit(1604351688.211:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=597 comm="apparmor_parser"
audit: type=1400 audit(1604351688.215:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=605 comm="apparmor_parser"
snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1986A: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_analog hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_analog hdaudioC0D0:    hp_outs=1 (0x1a/0x0/0x0/0x0/0x0)
snd_hda_codec_analog hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_analog hdaudioC0D0:    dig-out=0x25/0x0
snd_hda_codec_analog hdaudioC0D0:    inputs:
snd_hda_codec_analog hdaudioC0D0:      Rear Mic=0x1d
snd_hda_codec_analog hdaudioC0D0:      Front Mic=0x1f
snd_hda_codec_analog hdaudioC0D0:      Line=0x1c
snd_hda_codec_analog hdaudioC0D0:      CD=0x22
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20: link becomes ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:04.0/0000:01:00.1/sound/card1/input21
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:04.0/0000:01:00.1/sound/card1/input22
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:04.0/0000:01:00.1/sound/card1/input23
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:04.0/0000:01:00.1/sound/card1/input24
input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:04.0/0000:01:00.1/sound/card1/input25
input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:04.0/0000:01:00.1/sound/card1/input26
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
caller os_map_kernel_space.part.10+0x6d/0x80 [nvidia] mapping multiple BARs
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input27
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input28
input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input29
input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:10.1/sound/card0/input30
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:10.1/sound/card0/input31
logitech-hidpp-device 0003:046D:4023.0003: HID++ 2.0 device connected.
logitech-hidpp-device 0003:046D:4054.0004: HID++ 4.5 device connected.

Return To 2020-11-02_2315_Quadro_K2200 System Information