dmesg - test1
microcode: microcode updated early to revision 0x28, date = 2019-11-12
Linux version 5.4.0-48-generic (buildd@lcy01-amd64-023) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #52~18.04.1-Ubuntu SMP Thu Sep 10 12:50:22 UTC 2020 (Ubuntu 5.4.0-48.52~18.04.1-generic 5.4.60)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c9dc1fff] usable
BIOS-e820: [mem 0x00000000c9dc2000-0x00000000c9dc8fff] ACPI NVS
BIOS-e820: [mem 0x00000000c9dc9000-0x00000000ca69afff] usable
BIOS-e820: [mem 0x00000000ca69b000-0x00000000ca934fff] reserved
BIOS-e820: [mem 0x00000000ca935000-0x00000000dd1a9fff] usable
BIOS-e820: [mem 0x00000000dd1aa000-0x00000000dd3d5fff] reserved
BIOS-e820: [mem 0x00000000dd3d6000-0x00000000dd412fff] usable
BIOS-e820: [mem 0x00000000dd413000-0x00000000dd4bafff] ACPI NVS
BIOS-e820: [mem 0x00000000dd4bb000-0x00000000ddf84fff] reserved
BIOS-e820: [mem 0x00000000ddf85000-0x00000000ddffefff] type 20
BIOS-e820: [mem 0x00000000ddfff000-0x00000000ddffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000031dffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xdd497000 ACPI 2.0=0xdd497000 SMBIOS=0xf04c0 MPS=0xfd4f0
secureboot: Secure boot could not be determined (mode 0)
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./B85M Pro4, BIOS P2.30 03/26/2015
tsc: Fast TSC calibration using PIT
tsc: Detected 3498.954 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x31e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7F00000000 write-back
2 base 0300000000 mask 7FF0000000 write-back
3 base 0310000000 mask 7FF8000000 write-back
4 base 0318000000 mask 7FFC000000 write-back
5 base 031C000000 mask 7FFE000000 write-back
6 base 00E0000000 mask 7FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 12256M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xde000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7e0-0x000fd7ef]
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
secureboot: Secure boot could not be determined (mode 0)
RAMDISK: [mem 0x3018b000-0x340bcfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DD497000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DD497088 00008C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DD4A1CA0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DD4971A8 00AAF1 (v02 ALASKA A M I 00000230 INTL 20091112)
ACPI: FACS 0x00000000DD4B9080 000040
ACPI: APIC 0x00000000DD4A1DB0 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DD4A1E28 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DD4A1E70 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DD4A23B0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: MCFG 0x00000000DD4A2E88 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DD4A2EC8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DD4A2F00 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DD4A3270 003493 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: AAFT 0x00000000DD4A6708 00042F (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: ASF! 0x00000000DD4A6B38 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: BGRT 0x00000000DD4A6BE0 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 0x00000000DD4A6C18 000080 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000031dffffff]
NODE_DATA(0) allocated [mem 0x31dfd4000-0x31dffefff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000031dffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000c9dc1fff]
node 0: [mem 0x00000000c9dc9000-0x00000000ca69afff]
node 0: [mem 0x00000000ca935000-0x00000000dd1a9fff]
node 0: [mem 0x00000000dd3d6000-0x00000000dd412fff]
node 0: [mem 0x00000000ddfff000-0x00000000ddffffff]
node 0: [mem 0x0000000100000000-0x000000031dffffff]
Zeroed struct page in unavailable ranges: 20764 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000031dffffff]
On node 0 totalpages: 3124964
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 14078 pages used for memmap
DMA32 zone: 900935 pages, LIFO batch:63
Normal zone: 34688 pages used for memmap
Normal zone: 2220032 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
e820: update [mem 0xd0a3b000-0xd0c7bfff] usable ==> reserved
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xc9dc2000-0xc9dc8fff]
PM: Registered nosave memory: [mem 0xca69b000-0xca934fff]
PM: Registered nosave memory: [mem 0xd0a3b000-0xd0c7bfff]
PM: Registered nosave memory: [mem 0xdd1aa000-0xdd3d5fff]
PM: Registered nosave memory: [mem 0xdd413000-0xdd4bafff]
PM: Registered nosave memory: [mem 0xdd4bb000-0xddf84fff]
PM: Registered nosave memory: [mem 0xddf85000-0xddffefff]
PM: Registered nosave memory: [mem 0xde000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xde000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 3076109
Policy zone: Normal
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 11912624K/12499856K available (14339K kernel code, 2379K rwdata, 4928K rodata, 2704K init, 5020K bss, 587232K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x41/0x550 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 44229 entries in 173 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
DMAR: RMRR base: 0x000000dd35d000 end: 0x000000dd369fff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x326f752092a, max_idle_ns: 440795300765 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6997.90 BogoMIPS (lpj=13995816)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
SRBDS: Mitigation: Microcode
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i5-4690K CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (27991.63 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xc9dc2000-0xc9dc8fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xdd413000-0xdd4bafff] (688128 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 19:34:07, date: 2020-09-27
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1601235247.032:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 5 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9B470F144000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 10 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf3120000-0xf312ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf313c000-0xf313c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf3100000-0xf311ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf3139000-0xf3139fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf3138000-0xf31383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf3130000-0xf3133fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf3137000-0xf31373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf3136000-0xf31367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf3135000-0xf31350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1f08] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf3000000-0xf307ffff pref]
pci 0000:01:00.0: BAR 3: assigned to efifb
pci 0000:01:00.0: PME# supported from D0 D3hot
pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
pci 0000:01:00.1: [10de:10f9] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf30d0000-0xf30d3fff]
pci 0000:01:00.2: [10de:1ada] type 00 class 0x0c0330
pci 0000:01:00.2: reg 0x10: [mem 0xf3080000-0xf30bffff 64bit pref]
pci 0000:01:00.2: reg 0x1c: [mem 0xf30c0000-0xf30cffff 64bit pref]
pci 0000:01:00.2: PME# supported from D0 D3hot
pci 0000:01:00.3: [10de:1adb] type 00 class 0x0c8000
pci 0000:01:00.3: reg 0x10: [mem 0xf30d4000-0xf30d4fff]
pci 0000:01:00.3: PME# supported from D0 D3hot
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf30fffff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
pci_bus 0000:04: extended config space not accessible
pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xc9dc2000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca69b000-0xcbffffff]
e820: reserve RAM buffer [mem 0xd0a3b000-0xd3ffffff]
e820: reserve RAM buffer [mem 0xdd1aa000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdd413000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x31e000000-0x31fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1c00-0x1cfe] has been reserved
system 00:01: [io 0x1d00-0x1dfe] has been reserved
system 00:01: [io 0x1e00-0x1efe] has been reserved
system 00:01: [io 0x1f00-0x1ffe] has been reserved
system 00:01: [io 0x1800-0x18fe] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xf7fef000-0xf7feffff] has been reserved
system 00:06: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf3200000-0xf33fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf3400000-0xf35fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf30fffff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf3200000-0xf33fffff]
pci 0000:00:1c.0: bridge window [mem 0xf3400000-0xf35fffff 64bit pref]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 03-04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xe0000000-0xf30fffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf3200000-0xf33fffff]
pci_bus 0000:02: resource 2 [mem 0xf3400000-0xf35fffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:03: resource 11 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:04: resource 11 [mem 0xe0000000-0xfeafffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6b0 took 23119 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6b0 took 23423 usecs
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
pci 0000:01:00.2: D0 power state depends on 0000:01:00.0
pci 0000:01:00.3: D0 power state depends on 0000:01:00.0
pci 0000:03:00.0: Disabling ASPM L0s/L1
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 64712K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xcca3b000-0xd0a3b000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4.1 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3138000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-48-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3137000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-48-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
xhci_hcd 0000:01:00.2: xHCI Host Controller
xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 5
xhci_hcd 0000:01:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
usb usb5: SerialNumber: 0000:01:00.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:01:00.2: xHCI Host Controller
xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 6
xhci_hcd 0000:01:00.2: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
usb usb6: SerialNumber: 0000:01:00.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x306c3, pf=0x2, revision=0x28
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (910334818, 212740)->(917751505, -7203947)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 59a6f4fdc5599d4ba313e816491c745e50e7fa8e'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 4:95:598
rtc_cmos 00:02: setting system clock to 2020-09-27T19:34:08 UTC (1601235248)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2704K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1216K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x24 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf3136000 port 0xf3136200 irq 32
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xf3136000 port 0xf3136380 irq 32
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:9e:fa:9a
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 enp0s25: renamed from eth0
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 3-2: new high-speed USB device number 2 using xhci_hcd
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ATA-10: KINGSTON SA400S37240G, SBFKB1D2, max UDMA/133
ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1D2 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: configured for UDMA/100
usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 3-2: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: RTL2838UHIDIR
usb 3-2: Manufacturer: Realtek
usb 3-2: SerialNumber: 00000001
sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg1 type 5
usb 3-3: new full-speed USB device number 3 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c07e, bcdDevice=90.03
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: Gaming Mouse G402
usb 3-3: Manufacturer: Logitech
usb 3-3: SerialNumber: 6D8124955554
usb 3-8: new high-speed USB device number 4 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3498.983 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x326f8fd4e56, max_idle_ns: 440795246793 ns
clocksource: Switched to clocksource tsc
usb 3-8: New USB device found, idVendor=058f, idProduct=6360, bcdDevice= 1.00
usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-8: Product: USB Card Reader
usb 3-8: Manufacturer: Alcor Micro, Corp.
usb 3-8: SerialNumber: 058F63606476
usb 3-11: new high-speed USB device number 5 using xhci_hcd
usb 3-11: New USB device found, idVendor=046d, idProduct=0826, bcdDevice= 0.10
usb 3-11: New USB device strings: Mfr=0, Product=2, SerialNumber=1
usb 3-11: Product: HD Webcam C525
usb 3-11: SerialNumber: 53403390
usb 3-12: new full-speed USB device number 6 using xhci_hcd
usb 3-12: New USB device found, idVendor=1532, idProduct=0228, bcdDevice= 2.00
usb 3-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-12: Product: Razer BlackWidow Elite
usb 3-12: Manufacturer: Razer
hidraw: raw HID events driver (C) Jiri Kosina
usb-storage 3-8:1.0: USB Mass Storage device detected
scsi host6: usb-storage 3-8:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Gaming Mouse G402 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C07E.0001/input/input2
hid-generic 0003:046D:C07E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G402] on usb-0000:00:14.0-3/input0
input: Logitech Gaming Mouse G402 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C07E.0002/input/input3
input: Logitech Gaming Mouse G402 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C07E.0002/input/input4
input: Logitech Gaming Mouse G402 System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C07E.0002/input/input5
hid-generic 0003:046D:C07E.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G402] on usb-0000:00:14.0-3/input1
input: Razer Razer BlackWidow Elite as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/0003:1532:0228.0003/input/input8
hid-generic 0003:1532:0228.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer BlackWidow Elite] on usb-0000:00:14.0-12/input0
input: Razer Razer BlackWidow Elite Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.1/0003:1532:0228.0004/input/input9
input: Razer Razer BlackWidow Elite Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.1/0003:1532:0228.0004/input/input10
input: Razer Razer BlackWidow Elite System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.1/0003:1532:0228.0004/input/input11
input: Razer Razer BlackWidow Elite as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.1/0003:1532:0228.0004/input/input12
hid-generic 0003:1532:0228.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer BlackWidow Elite] on usb-0000:00:14.0-12/input1
input: Razer Razer BlackWidow Elite as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.2/0003:1532:0228.0005/input/input13
hid-generic 0003:1532:0228.0005: input,hidraw4: USB HID v1.11 Mouse [Razer Razer BlackWidow Elite] on usb-0000:00:14.0-12/input2
scsi 6:0:0:0: Direct-Access Generic CF Card Reader 1.00 PQ: 0 ANSI: 0
scsi 6:0:0:1: Direct-Access Generic SD MS Reader 1.01 PQ: 0 ANSI: 0
scsi 6:0:0:2: Direct-Access Generic SMC xD Reader 1.02 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:1: Attached scsi generic sg3 type 0
sd 6:0:0:2: Attached scsi generic sg4 type 0
sd 6:0:0:2: [sdd] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:1: [sdc] Attached SCSI removable disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Libvirt guests shutdown.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Reached target Slices.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[365]: Received request to flush runtime journal from PID 1
systemd-journald[365]: File /var/log/journal/c22b483fd0e7471ea94c4f7bc1ea40f8/system.journal corrupted or uncleanly shut down, renaming and replacing.
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
usb 3-2: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190816/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR2) (20190816/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR2) (20190816/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR2) (20190816/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
usb 3-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design)
usb 3-2: media controller created
dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
uvcvideo: Found UVC 1.00 device HD Webcam C525 (046d:0826)
i2c i2c-1: Added multiplexed i2c bus 2
rtl2832 1-0010: Realtek RTL2832 successfully attached
usb 3-2: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered.
uvcvideo 3-11:1.2: Entity type for entity Extension 5 was not initialized!
uvcvideo 3-11:1.2: Entity type for entity Camera 1 was not initialized!
uvcvideo 3-11:1.2: Entity type for entity Extension 6 was not initialized!
uvcvideo 3-11:1.2: Entity type for entity Extension 7 was not initialized!
uvcvideo 3-11:1.2: Entity type for entity Extension 8 was not initialized!
input: HD Webcam C525 as /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.2/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
r820t 2-001a: creating new instance
usb 3-11: set resolution quirk: cval->res = 384
usbcore: registered new interface driver snd-usb-audio
r820t 2-001a: Rafael Micro r820t successfully identified
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
snd_hda_intel 0000:00:1b.0: device 1849:c892 is on the power_save blacklist, forcing power_save to 0
rtl2832_sdr rtl2832_sdr.2.auto: Registered as swradio0
rtl2832_sdr rtl2832_sdr.2.auto: Realtek RTL2832 SDR attached
rtl2832_sdr rtl2832_sdr.2.auto: SDR API is still slightly experimental and functionality changes may follow
Registered IR keymap rc-empty
rc rc0: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb3/3-2/rc/rc0
rc rc0: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 0, raw IR receiver, no transmitter
input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb3/3-2/rc/rc0/input20
usb 3-2: dvb_usb_v2: schedule remote query interval to 200 msecs
usb 3-2: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected
usbcore: registered new interface driver dvb_usb_rtl28xxu
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia-nvlink: Nvlink Core is being initialized, major device number 237
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 450.66 Wed Aug 12 19:42:48 UTC 2020
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 450.66 Wed Aug 12 19:37:58 UTC 2020
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain dram
nvidia-uvm: Loaded the UVM driver, major device number 235.
nvidia-gpu 0000:01:00.3: i2c timeout error e0000000
ucsi_ccg 0-0008: i2c_transfer failed -110
ucsi_ccg 0-0008: ucsi_ccg_init failed - -110
ucsi_ccg: probe of 0-0008 failed with error -110
audit: type=1400 audit(1601235256.139:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=786 comm="apparmor_parser"
audit: type=1400 audit(1601235256.139:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=786 comm="apparmor_parser"
audit: type=1400 audit(1601235256.139:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=786 comm="apparmor_parser"
audit: type=1400 audit(1601235256.139:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=786 comm="apparmor_parser"
audit: type=1400 audit(1601235256.139:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=789 comm="apparmor_parser"
audit: type=1400 audit(1601235256.139:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=789 comm="apparmor_parser"
audit: type=1400 audit(1601235256.139:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=789 comm="apparmor_parser"
audit: type=1400 audit(1601235256.139:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=794 comm="apparmor_parser"
audit: type=1400 audit(1601235256.139:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=796 comm="apparmor_parser"
audit: type=1400 audit(1601235256.143:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=798 comm="apparmor_parser"
Started bpfilter
bpfilter: Loaded bpfilter_umh pid 1123
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input21
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input22
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input23
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input24
input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input25
input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input26
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
caller os_map_kernel_space.part.10+0x6d/0x80 [nvidia] mapping multiple BARs
usb 3-11: reset high-speed USB device number 5 using xhci_hcd
e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
systemd-journald[365]: File /var/log/journal/c22b483fd0e7471ea94c4f7bc1ea40f8/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
rfkill: input handler disabled
kauditd_printk_skb: 63 callbacks suppressed
audit: type=1400 audit(1601235282.707:75): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=2083 comm="snap-confine" capability=4 capname="fsetid"
audit: type=1107 audit(1601235284.075:76): pid=921 uid=103 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/UDisks2" interface="org.freedesktop.DBus.ObjectManager" member="GetManagedObjects" mask="send" name=":1.10" pid=2083 label="snap.indicator-sensors.indicator-sensors" peer_pid=956 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
sr 5:0:0:0: [sr0] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 5:0:0:0: [sr0] tag#8 Sense Key : Not Ready [current]
sr 5:0:0:0: [sr0] tag#8 Add. Sense: Medium not present - tray closed
sr 5:0:0:0: [sr0] tag#8 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
sr 5:0:0:0: [sr0] tag#9 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 0, async page read
sr 5:0:0:0: [sr0] tag#10 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 1, async page read
sr 5:0:0:0: [sr0] tag#11 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 2, async page read
sr 5:0:0:0: [sr0] tag#12 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 3, async page read
sr 5:0:0:0: [sr0] tag#13 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 4, async page read
sr 5:0:0:0: [sr0] tag#14 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 5, async page read
sr 5:0:0:0: [sr0] tag#15 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 6, async page read
sr 5:0:0:0: [sr0] tag#21 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 7, async page read
perf: interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
perf: interrupt took too long (3186 > 3137), lowering kernel.perf_event_max_sample_rate to 62750
perf: interrupt took too long (4033 > 3982), lowering kernel.perf_event_max_sample_rate to 49500