dmesg - abby.li
microcode: microcode updated early to revision 0xca, date = 2019-10-03
Linux version 5.0.0-37-generic (buildd@lcy01-amd64-023) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #40~18.04.1-Ubuntu SMP Thu Nov 14 12:06:39 UTC 2019 (Ubuntu 5.0.0-37.40~18.04.1-generic 5.0.21)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved
BIOS-e820: [mem 0x0000000040400000-0x0000000085f3cfff] usable
BIOS-e820: [mem 0x0000000085f3d000-0x0000000085f3dfff] ACPI NVS
BIOS-e820: [mem 0x0000000085f3e000-0x0000000085f3efff] reserved
BIOS-e820: [mem 0x0000000085f3f000-0x000000008c142fff] usable
BIOS-e820: [mem 0x000000008c143000-0x000000008c5c2fff] reserved
BIOS-e820: [mem 0x000000008c5c3000-0x000000008c66cfff] usable
BIOS-e820: [mem 0x000000008c66d000-0x000000008ca19fff] ACPI NVS
BIOS-e820: [mem 0x000000008ca1a000-0x000000008cf65fff] reserved
BIOS-e820: [mem 0x000000008cf66000-0x000000008cffefff] type 20
BIOS-e820: [mem 0x000000008cfff000-0x000000008cffffff] usable
BIOS-e820: [mem 0x000000008d000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.70 by American Megatrends
efi: ACPI 2.0=0x8c66d000 ACPI=0x8c66d000 SMBIOS=0x8ce27000 SMBIOS 3.0=0x8ce26000 MEMATTR=0x8863f418 MPS=0xfcb20 ESRT=0x894e1a18
secureboot: Secure boot could not be determined (mode 0)
SMBIOS 3.1.1 present.
DMI: NuoDaJia NuoDaJia PC/NuoDaJia series, BIOS LSMXM608 06/19/2020
tsc: Detected 3600.000 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x26f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 base 008E000000 mask 7FFE000000 uncachable
4 base 008D800000 mask 7FFF800000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x8d000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcda0-0x000fcdaf]
esrt: Reserving ESRT space from 0x00000000894e1a18 to 0x00000000894e1a50.
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x251a01000, 0x251a01fff] PGTABLE
BRK [0x251a02000, 0x251a02fff] PGTABLE
BRK [0x251a03000, 0x251a03fff] PGTABLE
BRK [0x251a04000, 0x251a04fff] PGTABLE
BRK [0x251a05000, 0x251a05fff] PGTABLE
BRK [0x251a06000, 0x251a06fff] PGTABLE
BRK [0x251a07000, 0x251a07fff] PGTABLE
BRK [0x251a08000, 0x251a08fff] PGTABLE
BRK [0x251a09000, 0x251a09fff] PGTABLE
BRK [0x251a0a000, 0x251a0afff] PGTABLE
BRK [0x251a0b000, 0x251a0bfff] PGTABLE
BRK [0x251a0c000, 0x251a0cfff] PGTABLE
RAMDISK: [mem 0x3320f000-0x358fefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008C66D000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000008C66D0B0 0000E4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000008C697838 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000008C66D230 02A603 (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x000000008CA19F00 000040
ACPI: APIC 0x000000008C697950 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000008C6979D8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000008C697A20 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000008C697AC0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000008C697B00 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: SSDT 0x000000008C697EA8 003165 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: HPET 0x000000008C69B010 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000008C69B048 0011AA (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x000000008C69C1F8 000A2E (v02 INTEL xh_rvp08 00000000 INTL 20160422)
ACPI: UEFI 0x000000008C69CC28 000048 (v01 ALASKA A M I 00000002 01000013)
ACPI: SSDT 0x000000008C69CC70 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x000000008C69E420 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000008C69E4B8 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
ACPI: SSDT 0x000000008C69E600 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000008C69E8A0 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: SSDT 0x000000008C6A18A8 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
ACPI: SSDT 0x000000008C6A1DC0 0002E9 (v02 INTEL Wwan 00000001 INTL 20160422)
ACPI: DBGP 0x000000008C6A20B0 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000008C6A20E8 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: SSDT 0x000000008C6A2140 0012E6 (v02 ALASKA UsbCTabl 00001000 INTL 20160422)
ACPI: DMAR 0x000000008C6A3428 0000A8 (v01 INTEL EDK2 00000001 INTL 00000001)
ACPI: ASF! 0x000000008C6A34D0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: WSMT 0x000000008C6A3570 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000026effffff]
NODE_DATA(0) allocated [mem 0x26efd5000-0x26effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000026effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000003fffffff]
node 0: [mem 0x0000000040400000-0x0000000085f3cfff]
node 0: [mem 0x0000000085f3f000-0x000000008c142fff]
node 0: [mem 0x000000008c5c3000-0x000000008c66cfff]
node 0: [mem 0x000000008cfff000-0x000000008cffffff]
node 0: [mem 0x0000000100000000-0x000000026effffff]
Zeroed struct page in unavailable ranges: 17015 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
On node 0 totalpages: 2076041
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 8888 pages used for memmap
DMA32 zone: 568812 pages, LIFO batch:63
Normal zone: 23488 pages used for memmap
Normal zone: 1503232 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x8e000000-0x8fffffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0x40000000-0x403fffff]
PM: Registered nosave memory: [mem 0x85f3d000-0x85f3dfff]
PM: Registered nosave memory: [mem 0x85f3e000-0x85f3efff]
PM: Registered nosave memory: [mem 0x8c143000-0x8c5c2fff]
PM: Registered nosave memory: [mem 0x8c66d000-0x8ca19fff]
PM: Registered nosave memory: [mem 0x8ca1a000-0x8cf65fff]
PM: Registered nosave memory: [mem 0x8cf66000-0x8cffefff]
PM: Registered nosave memory: [mem 0x8d000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x90000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u524288
pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 2043574
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7967152K/8304164K available (14339K kernel code, 2336K rwdata, 4416K rodata, 2588K init, 5192K bss, 337012K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 41688 entries in 163 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20181213
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000008cbb9000 end: 0x0000008ce02fff
DMAR: RMRR base: 0x0000008d800000 end: 0x0000008fffffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.00 BogoMIPS (lpj=14400000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 36K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz (family: 0x6, model: 0x9e, stepping: 0xb)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
rcu: Hierarchical SRCU implementation.
random: crng done (trusting CPU's manufacturer)
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (28800.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x85f3d000-0x85f3dfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x8c66d000-0x8ca19fff] (3854336 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 16:53:39, date: 2020-09-01
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1598979218.036:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 12 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8921E52EA800 000738 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8921E4D8A300 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8921E52E8000 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8921E4CB7000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8921E4D52400 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3e1f] type 00 class 0x060000
pci 0000:00:02.0: [8086:3e91] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xdf42f000-0xdf42ffff 64bit]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf410000-0xdf41ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf42e000-0xdf42efff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf42d000-0xdf42dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf428000-0xdf429fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf42c000-0xdf42c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf42b000-0xdf42b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf424000-0xdf427fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf420000-0xdf423fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf400000-0xdf40ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf42a000-0xdf42a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [8086:157b] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xdf300000-0xdf31ffff]
pci 0000:01:00.0: reg 0x18: [io 0xe000-0xe01f]
pci 0000:01:00.0: reg 0x1c: [mem 0xdf320000-0xdf323fff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xdf300000-0xdf3fffff]
pci 0000:02:00.0: [8086:157b] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xdf200000-0xdf21ffff]
pci 0000:02:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:02:00.0: reg 0x1c: [mem 0xdf220000-0xdf223fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:03:00.0: [8086:08b1] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xdf100000-0xdf101fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 03]
pci 0000:00:1c.6: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:04:00.0: [9710:9990] type 00 class 0x0c0310
pci 0000:04:00.0: reg 0x10: [mem 0xdf007000-0xdf007fff]
pci 0000:04:00.1: [9710:9990] type 00 class 0x0c0320
pci 0000:04:00.1: reg 0x10: [mem 0xdf006000-0xdf006fff]
pci 0000:04:00.2: [9710:9990] type 00 class 0x0c0310
pci 0000:04:00.2: reg 0x10: [mem 0xdf005000-0xdf005fff]
pci 0000:04:00.3: [9710:9990] type 00 class 0x0c0320
pci 0000:04:00.3: reg 0x10: [mem 0xdf004000-0xdf004fff]
pci 0000:04:00.4: [9710:9990] type 00 class 0x0c0310
pci 0000:04:00.4: reg 0x10: [mem 0xdf003000-0xdf003fff]
pci 0000:04:00.5: [9710:9990] type 00 class 0x0c0320
pci 0000:04:00.5: reg 0x10: [mem 0xdf002000-0xdf002fff]
pci 0000:04:00.6: [9710:9990] type 00 class 0x0c0310
pci 0000:04:00.6: reg 0x10: [mem 0xdf001000-0xdf001fff]
pci 0000:04:00.7: [9710:9990] type 00 class 0x0c0320
pci 0000:04:00.7: reg 0x10: [mem 0xdf000000-0xdf000fff]
pci 0000:00:1c.7: PCI bridge to [bus 04]
pci 0000:00:1c.7: bridge window [mem 0xdf000000-0xdf0fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x85f3d000-0x87ffffff]
e820: reserve RAM buffer [mem 0x8c143000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8c66d000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8d000000-0x8fffffff]
e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x40000000-0x403fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0a00-0x0a2f] has been reserved
system 00:01: [io 0x0a30-0x0a3f] has been reserved
system 00:01: [io 0x0a40-0x0a4f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
ACPI: IRQ 7 override to edge, high
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
ACPI: IRQ 7 override to edge, high
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
ACPI: IRQ 7 override to edge, high
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
ACPI: IRQ 7 override to edge, high
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [io 0x0680-0x069f] has been reserved
system 00:08: [io 0xffff] has been reserved
system 00:08: [io 0xffff] has been reserved
system 00:08: [io 0xffff] has been reserved
system 00:08: [io 0x1800-0x18fe] has been reserved
system 00:08: [io 0x164e-0x164f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x0800-0x087f] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:0b: [io 0x1854-0x1857] has been reserved
system 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0c: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0d: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:0d: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:0d: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:0d: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:0d: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:0d: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:0d: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0e: [io 0xff00-0xfffe] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0f: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:0f: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:0f: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 16 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xdf300000-0xdf3fffff]
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1c.6: PCI bridge to [bus 03]
pci 0000:00:1c.6: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:00:1c.7: PCI bridge to [bus 04]
pci 0000:00:1c.7: bridge window [mem 0xdf000000-0xdf0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xdf300000-0xdf3fffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:04: resource 1 [mem 0xdf000000-0xdf0fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:04:00.0: enabling device (0000 -> 0002)
pci 0000:04:00.1: enabling device (0000 -> 0002)
pci 0000:04:00.2: enabling device (0000 -> 0002)
pci 0000:04:00.3: enabling device (0000 -> 0002)
pci 0000:04:00.4: enabling device (0000 -> 0002)
pci 0000:04:00.5: enabling device (0000 -> 0002)
pci 0000:04:00.6: enabling device (0000 -> 0002)
pci 0000:04:00.7: enabling device (0000 -> 0002)
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 39872K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x80ab2000-0x84ab2000] (64MB)
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns
clocksource: Switched to clocksource tsc
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.28)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
pcieport 0000:00:1c.0: Signaling PME with IRQ 122
aer 0000:00:1c.0:pcie002: AER enabled with IRQ 122
pcieport 0000:00:1c.5: Signaling PME with IRQ 123
aer 0000:00:1c.5:pcie002: AER enabled with IRQ 123
pcieport 0000:00:1c.6: Signaling PME with IRQ 124
aer 0000:00:1c.6:pcie002: AER enabled with IRQ 124
pcieport 0000:00:1c.7: Signaling PME with IRQ 125
aer 0000:00:1c.7:pcie002: AER enabled with IRQ 125
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, using 1920k, total 1920k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
00:04: ttyS2 at I/O 0x3e8 (irq = 7, base_baud = 115200) is a 16550A
00:05: ttyS3 at I/O 0x2e8 (irq = 7, base_baud = 115200) is a 16550A
00:06: ttyS4 at I/O 0x2f0 (irq = 7, base_baud = 115200) is a 16550A
00:07: ttyS5 at I/O 0x2e0 (irq = 7, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:04:00.1: EHCI Host Controller
ehci-pci 0000:04:00.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:04:00.1: applying MosChip frame-index workaround
ehci-pci 0000:04:00.1: irq 19, io mem 0xdf006000
ehci-pci 0000:04:00.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.0.0-37-generic ehci_hcd
usb usb1: SerialNumber: 0000:04:00.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-pci 0000:04:00.3: EHCI Host Controller
ehci-pci 0000:04:00.3: new USB bus registered, assigned bus number 2
ehci-pci 0000:04:00.3: applying MosChip frame-index workaround
ehci-pci 0000:04:00.3: irq 16, io mem 0xdf004000
ehci-pci 0000:04:00.3: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.0.0-37-generic ehci_hcd
usb usb2: SerialNumber: 0000:04:00.3
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci-pci 0000:04:00.5: EHCI Host Controller
ehci-pci 0000:04:00.5: new USB bus registered, assigned bus number 3
ehci-pci 0000:04:00.5: applying MosChip frame-index workaround
ehci-pci 0000:04:00.5: irq 17, io mem 0xdf002000
ehci-pci 0000:04:00.5: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 5.0.0-37-generic ehci_hcd
usb usb3: SerialNumber: 0000:04:00.5
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-pci 0000:04:00.7: EHCI Host Controller
ehci-pci 0000:04:00.7: new USB bus registered, assigned bus number 4
ehci-pci 0000:04:00.7: applying MosChip frame-index workaround
ehci-pci 0000:04:00.7: irq 18, io mem 0xdf000000
ehci-pci 0000:04:00.7: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 5.0.0-37-generic ehci_hcd
usb usb4: SerialNumber: 0000:04:00.7
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:04:00.0: OHCI PCI host controller
ohci-pci 0000:04:00.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:04:00.0: irq 19, io mem 0xdf007000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 5.0.0-37-generic ohci_hcd
usb usb5: SerialNumber: 0000:04:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-pci 0000:04:00.2: OHCI PCI host controller
ohci-pci 0000:04:00.2: new USB bus registered, assigned bus number 6
ohci-pci 0000:04:00.2: irq 16, io mem 0xdf005000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 5.0.0-37-generic ohci_hcd
usb usb6: SerialNumber: 0000:04:00.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ohci-pci 0000:04:00.4: OHCI PCI host controller
ohci-pci 0000:04:00.4: new USB bus registered, assigned bus number 7
ohci-pci 0000:04:00.4: irq 17, io mem 0xdf003000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 5.0.0-37-generic ohci_hcd
usb usb7: SerialNumber: 0000:04:00.4
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
ohci-pci 0000:04:00.6: OHCI PCI host controller
ohci-pci 0000:04:00.6: new USB bus registered, assigned bus number 8
ohci-pci 0000:04:00.6: irq 18, io mem 0xdf001000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 5.0.0-37-generic ohci_hcd
usb usb8: SerialNumber: 0000:04:00.6
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 5.0.0-37-generic xhci-hcd
usb usb9: SerialNumber: 0000:00:14.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 10 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 5.0.0-37-generic xhci-hcd
usb usb10: SerialNumber: 0000:00:14.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:0a: RTC can wake from S4
rtc_cmos 00:0a: registered as rtc0
rtc_cmos 00:0a: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:0d [mem 0xfdb00000-0xfdffffff]
caller pmc_core_probe+0xb7/0x2bb mapping multiple BARs
intel_pmc_core: initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
mce: Using 10 MCE banks
RAS: Correctable Errors collector initialized.
microcode: sig=0x906eb, pf=0x2, revision=0xca
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1185672975, 341574)->(1189572813, -3558264)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 88fcad88465f792265cf358553c118dce4c5c672'
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI db list
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI MokListRT
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI dbx list
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
Magic number: 4:130:893
rtc_cmos 00:0a: setting system clock to 2020-09-01T16:53:40 UTC (1598979220)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2588K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2016K
Freeing unused kernel image memory: 1728K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
dca service started, version 1.12.1
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
pps pps0: new PPS source ptp0
igb 0000:01:00.0: added PHC on eth0
igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 68:ed:a6:00:50:99
igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b100 irq 127
ata2: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b180 irq 127
ata3: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b200 irq 127
ata4: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b280 irq 127
pps pps1: new PPS source ptp1
igb 0000:02:00.0: added PHC on eth1
igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 68:ed:a6:00:51:00
igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
usb 6-1: new low-speed USB device number 2 using ohci-pci
usb 7-1: new low-speed USB device number 2 using ohci-pci
usb 9-6: new full-speed USB device number 2 using xhci_hcd
ata2: SATA link down (SStatus 4 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20181213/psargs-330)
No Local Variables are initialized for Method [_GTF]
No Arguments are initialized for method [_GTF]
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT2._GTF, AE_NOT_FOUND (20181213/psparse-531)
ata3.00: NCQ Send/Recv Log not supported
ata3.00: ATA-10: FORESEE 128GB SSD, V4.6, max UDMA/133
ata3.00: 250069680 sectors, multi 0: LBA48 NCQ (depth 32), AA
ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20181213/psargs-330)
No Local Variables are initialized for Method [_GTF]
No Arguments are initialized for method [_GTF]
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT2._GTF, AE_NOT_FOUND (20181213/psparse-531)
ata3.00: NCQ Send/Recv Log not supported
ata3.00: configured for UDMA/133
ata1: SATA link down (SStatus 4 SControl 300)
scsi 2:0:0:0: Direct-Access ATA FORESEE 128GB SS V4.6 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
usb 9-6: New USB device found, idVendor=0471, idProduct=9902, bcdDevice= 1.00
usb 9-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-6: Product: NJLAIKE AC-USB
usb 9-6: Manufacturer: NJLIKE
usb 6-1: New USB device found, idVendor=15d9, idProduct=0a4e, bcdDevice= 1.00
usb 6-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-1: Product: USB OPTICAL MOUSE
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1c.7/0000:04:00.2/usb6/6-1/6-1:1.0/0003:15D9:0A4E.0001/input/input3
hid-generic 0003:15D9:0A4E.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:04:00.2-1/input0
usb 7-1: New USB device found, idVendor=1c4f, idProduct=0026, bcdDevice= 1.10
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: USB Keyboard
usb 7-1: Manufacturer: SIGMACHIP
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:04:00.4/usb7/7-1/7-1:1.0/0003:1C4F:0026.0002/input/input4
usb 9-8: new full-speed USB device number 3 using xhci_hcd
hid-generic 0003:1C4F:0026.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:04:00.4-1/input0
input: SIGMACHIP USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1c.7/0000:04:00.4/usb7/7-1/7-1:1.1/0003:1C4F:0026.0003/input/input5
input: SIGMACHIP USB Keyboard System Control as /devices/pci0000:00/0000:00:1c.7/0000:04:00.4/usb7/7-1/7-1:1.1/0003:1C4F:0026.0003/input/input6
hid-generic 0003:1C4F:0026.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:04:00.4-1/input1
usb 9-8: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
usb 9-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd-journald[325]: Received request to flush runtime journal from PID 1
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
mei_me 0000:00:16.0: enabling device (0004 -> 0006)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
usbcore: registered new interface driver btusb
VFIO - User Level meta-driver version: 0.3
Bluetooth: hci0: read Intel version: 370710018002030d00
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:03:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:03:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
cryptd: max_cpu_qlen set to 1000
------------[ cut here ]------------
WARN_ON(!((dev_priv)->info.platform_mask & (1UL info.platform_mask & (1UL 0002)
snd_hda_intel 0000:00:1f.3: Linked as a consumer to 0000:00:02.0
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
audit: type=1400 audit(1598979223.763:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=688 comm="apparmor_parser"
audit: type=1400 audit(1598979223.763:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=688 comm="apparmor_parser"
audit: type=1400 audit(1598979223.767:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=686 comm="apparmor_parser"
audit: type=1400 audit(1598979223.767:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=686 comm="apparmor_parser"
audit: type=1400 audit(1598979223.767:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=686 comm="apparmor_parser"
audit: type=1400 audit(1598979223.767:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=683 comm="apparmor_parser"
audit: type=1400 audit(1598979223.767:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=683 comm="apparmor_parser"
audit: type=1400 audit(1598979223.767:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=683 comm="apparmor_parser"
audit: type=1400 audit(1598979223.767:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=683 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
aufs 4.x-rcN-20190204
systemd-journald[325]: File /var/log/journal/5134e42b44ed44c18a4f9bf16a2d490a/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
broken atomic modeset userspace detected, disabling atomic
iwlwifi 0000:03:00.0: BIOS contains WGDS but no WRDS
igb 0000:02:00.0 eth1: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
kauditd_printk_skb: 25 callbacks suppressed
audit: type=1400 audit(1598979230.343:36): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1837 comm="apparmor_parser"
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
bpfilter: Loaded bpfilter_umh pid 1852
Initializing XFRM netlink socket
usb 9-3: new high-speed USB device number 4 using xhci_hcd
usb 9-3: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00
usb 9-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 9-3: Product: Mass Storage
usb 9-3: Manufacturer: Generic
usb 9-3: SerialNumber: 6DF46039
usb-storage 9-3:1.0: USB Mass Storage device detected
scsi host4: usb-storage 9-3:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 4:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 7-1: USB disconnect, device number 2
usb 9-1: new low-speed USB device number 5 using xhci_hcd
usb 9-1: New USB device found, idVendor=1c4f, idProduct=0026, bcdDevice= 1.10
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-1: Product: USB Keyboard
usb 9-1: Manufacturer: SIGMACHIP
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb9/9-1/9-1:1.0/0003:1C4F:0026.0004/input/input15
hid-generic 0003:1C4F:0026.0004: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-1/input0
input: SIGMACHIP USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb9/9-1/9-1:1.1/0003:1C4F:0026.0005/input/input16
input: SIGMACHIP USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb9/9-1/9-1:1.1/0003:1C4F:0026.0005/input/input17
hid-generic 0003:1C4F:0026.0005: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-1/input1
usb 6-1: USB disconnect, device number 2
usb 7-1: new low-speed USB device number 3 using ohci-pci
usb 7-1: New USB device found, idVendor=15d9, idProduct=0a4e, bcdDevice= 1.00
usb 7-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 7-1: Product: USB OPTICAL MOUSE
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1c.7/0000:04:00.4/usb7/7-1/7-1:1.0/0003:15D9:0A4E.0006/input/input18
hid-generic 0003:15D9:0A4E.0006: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:04:00.4-1/input0
usb 7-1: USB disconnect, device number 3
usb 7-1: new full-speed USB device number 4 using ohci-pci
usb 7-1: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: USB Receiver
usb 7-1: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1c.7/0000:04:00.4/usb7/7-1/7-1:1.0/0003:046D:C534.0007/input/input19
hid-generic 0003:046D:C534.0007: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:04:00.4-1/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1c.7/0000:04:00.4/usb7/7-1/7-1:1.1/0003:046D:C534.0008/input/input20
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1c.7/0000:04:00.4/usb7/7-1/7-1:1.1/0003:046D:C534.0008/input/input21
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1c.7/0000:04:00.4/usb7/7-1/7-1:1.1/0003:046D:C534.0008/input/input22
hid-generic 0003:046D:C534.0008: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:04:00.4-1/input1
usb 7-1: USB disconnect, device number 4
usb 9-3: USB disconnect, device number 4
usb 9-3: new high-speed USB device number 6 using xhci_hcd
usb 9-3: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00
usb 9-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 9-3: Product: Mass Storage
usb 9-3: Manufacturer: Generic
usb 9-3: SerialNumber: 6DF46039
usb-storage 9-3:1.0: USB Mass Storage device detected
scsi host4: usb-storage 9-3:1.0
scsi 4:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 7-1: new low-speed USB device number 5 using ohci-pci
usb 7-1: New USB device found, idVendor=275d, idProduct=0ba6, bcdDevice= 1.00
usb 7-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 7-1: Product: USB OPTICAL MOUSE
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1c.7/0000:04:00.4/usb7/7-1/7-1:1.0/0003:275D:0BA6.0009/input/input25
hid-generic 0003:275D:0BA6.0009: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:04:00.4-1/input0
usb 9-3: USB disconnect, device number 6
print_req_error: I/O error, dev sdb, sector 19105 flags 1
Buffer I/O error on dev sdb1, logical block 1, lost async page write
print_req_error: I/O error, dev sdb, sector 51873 flags 1
Buffer I/O error on dev sdb1, logical block 32769, lost async page write
print_req_error: I/O error, dev sdb, sector 910752 flags 1
Buffer I/O error on dev sdb1, logical block 891648, lost async page write
print_req_error: I/O error, dev sdb, sector 910769 flags 1
Buffer I/O error on dev sdb1, logical block 891665, lost async page write
Buffer I/O error on dev sdb1, logical block 891666, lost async page write
print_req_error: I/O error, dev sdb, sector 910785 flags 1
Buffer I/O error on dev sdb1, logical block 891681, lost async page write
print_req_error: I/O error, dev sdb, sector 1447553 flags 1
Buffer I/O error on dev sdb1, logical block 1428449, lost async page write
usb 7-1: USB disconnect, device number 5
usb 5-1: new low-speed USB device number 2 using ohci-pci
usb 5-1: New USB device found, idVendor=275d, idProduct=0ba6, bcdDevice= 1.00
usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-1: Product: USB OPTICAL MOUSE
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1c.7/0000:04:00.0/usb5/5-1/5-1:1.0/0003:275D:0BA6.000A/input/input26
hid-generic 0003:275D:0BA6.000A: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:04:00.0-1/input0
usb 9-3: new high-speed USB device number 7 using xhci_hcd
usb 9-3: Device not responding to setup address.
usb 9-3: Device not responding to setup address.
usb 9-3: device not accepting address 7, error -71
usb 9-3: new high-speed USB device number 8 using xhci_hcd
usb 9-3: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00
usb 9-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 9-3: Product: Mass Storage
usb 9-3: Manufacturer: Generic
usb 9-3: SerialNumber: 6DF46039
usb-storage 9-3:1.0: USB Mass Storage device detected
scsi host4: usb-storage 9-3:1.0
scsi 4:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 9-3: USB disconnect, device number 8