dmesg - blade
microcode: microcode updated early to revision 0xdc, date = 2020-04-27
Linux version 5.4.0-7634-generic (buildd@lcy01-amd64-029) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #38~1596560323~20.04~7719dbd-Ubuntu SMP Tue Aug 4 19:12:34 UTC 2 (Ubuntu 5.4.0-7634.38~1596560323~20.04~7719dbd-generic 5.4.41)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000373cefff] usable
BIOS-e820: [mem 0x00000000373cf000-0x00000000373cffff] ACPI NVS
BIOS-e820: [mem 0x00000000373d0000-0x0000000037419fff] reserved
BIOS-e820: [mem 0x000000003741a000-0x000000003a560fff] usable
BIOS-e820: [mem 0x000000003a561000-0x000000003a8aafff] reserved
BIOS-e820: [mem 0x000000003a8ab000-0x000000003a8e7fff] ACPI data
BIOS-e820: [mem 0x000000003a8e8000-0x000000003ae70fff] ACPI NVS
BIOS-e820: [mem 0x000000003ae71000-0x000000003b2fefff] reserved
BIOS-e820: [mem 0x000000003b2ff000-0x000000003b2fffff] usable
BIOS-e820: [mem 0x000000003b300000-0x000000003b3fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000004beffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x363d2018-0x363fa257] usable ==> usable
e820: update [mem 0x363d2018-0x363fa257] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000363d2017] usable
reserve setup_data: [mem 0x00000000363d2018-0x00000000363fa257] usable
reserve setup_data: [mem 0x00000000363fa258-0x00000000373cefff] usable
reserve setup_data: [mem 0x00000000373cf000-0x00000000373cffff] ACPI NVS
reserve setup_data: [mem 0x00000000373d0000-0x0000000037419fff] reserved
reserve setup_data: [mem 0x000000003741a000-0x000000003a560fff] usable
reserve setup_data: [mem 0x000000003a561000-0x000000003a8aafff] reserved
reserve setup_data: [mem 0x000000003a8ab000-0x000000003a8e7fff] ACPI data
reserve setup_data: [mem 0x000000003a8e8000-0x000000003ae70fff] ACPI NVS
reserve setup_data: [mem 0x000000003ae71000-0x000000003b2fefff] reserved
reserve setup_data: [mem 0x000000003b2ff000-0x000000003b2fffff] usable
reserve setup_data: [mem 0x000000003b300000-0x000000003b3fffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x00000004beffffff] usable
efi: EFI v2.40 by American Megatrends
efi: ESRT=0x3b292198 ACPI=0x3a8b7000 ACPI 2.0=0x3a8b7000 SMBIOS=0x3b1dc000 SMBIOS 3.0=0x3b1db000
secureboot: Secure boot disabled
SMBIOS 3.0.0 present.
DMI: Razer Blade/Blade, BIOS 02.00 12/06/2016
tsc: Detected 2600.000 MHz processor
tsc: Detected 2599.992 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x4bf000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 0040000000 mask 7FC0000000 uncachable
2 base 003C000000 mask 7FFC000000 uncachable
3 base 003B800000 mask 7FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x3b300 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000003b292198 to 0x000000003b2921d0.
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x211401000, 0x211401fff] PGTABLE
BRK [0x211402000, 0x211402fff] PGTABLE
BRK [0x211403000, 0x211403fff] PGTABLE
BRK [0x211404000, 0x211404fff] PGTABLE
BRK [0x211405000, 0x211405fff] PGTABLE
BRK [0x211406000, 0x211406fff] PGTABLE
BRK [0x211407000, 0x211407fff] PGTABLE
BRK [0x211408000, 0x211408fff] PGTABLE
BRK [0x211409000, 0x211409fff] PGTABLE
secureboot: Secure boot disabled
RAMDISK: [mem 0x2a404000-0x2f489fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000003A8B7000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000003A8B70B0 0000DC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000003A8DA508 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000003A8B7218 0232EE (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x000000003AE70F80 000040
ACPI: APIC 0x000000003A8DA618 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000003A8DA6D8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000003A8DA720 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000003A8DA7C0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x000000003A8DA800 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
ACPI: LPIT 0x000000003A8DA838 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000003A8DA8D0 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
ACPI: SSDT 0x000000003A8DAB18 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
ACPI: SSDT 0x000000003A8DD6C8 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
ACPI: DBGP 0x000000003A8DE2B0 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x000000003A8DE2E8 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000003A8DE340 000631 (v02 INTEL xh_rvp11 00000000 INTL 20120913)
ACPI: MSDM 0x000000003A8DE978 000055 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000003A8DE9D0 005661 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x000000003A8E4038 000042 (v01 00000000 00000000)
ACPI: SSDT 0x000000003A8E4080 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: SSDT 0x000000003A8E4EF8 00009F (v02 SgRef SgPeg 00001000 INTL 20120913)
ACPI: DMAR 0x000000003A8E4F98 000114 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: SSDT 0x000000003A8E50B0 000531 (v01 TbtGfx TbtGfx 00001000 INTL 20120913)
ACPI: BGRT 0x000000003A8E55E8 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000003A8E5620 001901 (v01 OptRef OptTabl 00001000 INTL 20120913)
ACPI: ASF! 0x000000003A8E6F28 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000004beffffff]
NODE_DATA(0) allocated [mem 0x4befd5000-0x4beffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000004beffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000373cefff]
node 0: [mem 0x000000003741a000-0x000000003a560fff]
node 0: [mem 0x000000003b2ff000-0x000000003b2fffff]
node 0: [mem 0x0000000100000000-0x00000004beffffff]
Zeroed struct page in unavailable ranges: 27469 pages
Initmem setup node 0 [mem 0x0000000000001000-0x00000004beffffff]
On node 0 totalpages: 4166835
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 3669 pages used for memmap
DMA32 zone: 234775 pages, LIFO batch:63
Normal zone: 61376 pages used for memmap
Normal zone: 3928064 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x3c000000-0x3fffffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
e820: update [mem 0x38f61000-0x39017fff] usable ==> reserved
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x363d2000-0x363d2fff]
PM: Registered nosave memory: [mem 0x363fa000-0x363fafff]
PM: Registered nosave memory: [mem 0x373cf000-0x373cffff]
PM: Registered nosave memory: [mem 0x373d0000-0x37419fff]
PM: Registered nosave memory: [mem 0x38f61000-0x39017fff]
PM: Registered nosave memory: [mem 0x3a561000-0x3a8aafff]
PM: Registered nosave memory: [mem 0x3a8ab000-0x3a8e7fff]
PM: Registered nosave memory: [mem 0x3a8e8000-0x3ae70fff]
PM: Registered nosave memory: [mem 0x3ae71000-0x3b2fefff]
PM: Registered nosave memory: [mem 0x3b300000-0x3b3fffff]
PM: Registered nosave memory: [mem 0x3b400000-0x3bffffff]
PM: Registered nosave memory: [mem 0x3c000000-0x3fffffff]
PM: Registered nosave memory: [mem 0x40000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x40000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 4101705
Policy zone: Normal
ACPI: button: Notify initial lid state as open
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16132636K/16667340K available (14339K kernel code, 2397K rwdata, 4952K rodata, 2712K init, 4992K bss, 534704K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 44480 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000003a615000 end: 0x0000003a634fff
DMAR: RMRR base: 0x0000003b800000 end: 0x0000003fffffff
DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
DMAR: ANDD device: 9 name: \_SB.PCI0.UA00
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a34a6eea, max_idle_ns: 440795264358 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.98 BogoMIPS (lpj=10399968)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
TAA: Mitigation: Clear CPU buffers
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4
MDS CPU bug present and SMT on, data leak possible. See for more details.
TAA CPU bug present and SMT on, data leak possible. See for more details.
#5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (41599.87 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x373cf000-0x373cffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x3a8e8000-0x3ae70fff] (5804032 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 09:18:55, date: 2020-08-19
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1597828734.040:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
KVM setup pv remote TLB flush
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 10 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8BD7AC0EF800 0005DC (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8BD7AC21B800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8BD7AC0DDE40 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8BD7AC772200 000130 (v02 PmRef HwpLvt 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8BD7ABF42800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8BD7AC393800 000119 (v02 PmRef ApHwp 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8BD7AC392000 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x40000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x70000000-0x7fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xdf32e000-0xdf32efff 64bit]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf32d000-0xdf32dfff 64bit]
pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0xdf32c000-0xdf32cfff 64bit]
pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
pci 0000:00:15.1: reg 0x10: [mem 0xdf32b000-0xdf32bfff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf32a000-0xdf32afff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.4: [8086:a11c] type 01 class 0x060400
pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:a127] type 00 class 0x118000
pci 0000:00:1e.0: reg 0x10: [mem 0xdf329000-0xdf329fff 64bit]
pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf324000-0xdf327fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf320000-0xdf323fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf328000-0xdf3280ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10de:1c20] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.0: Enabling HDA controller
pci 0000:01:00.1: [10de:10f1] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xdc5fffff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
pci 0000:3b:00.0: [8086:24fd] type 00 class 0x028000
pci 0000:3b:00.0: reg 0x10: [mem 0xdf200000-0xdf201fff 64bit]
pci 0000:3b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 3b]
pci 0000:00:1c.5: bridge window [mem 0xdf200000-0xdf2fffff]
acpiphp: Slot [1] registered
pci 0000:00:1d.0: PCI bridge to [bus 3c]
pci 0000:3d:00.0: [126f:2262] type 00 class 0x010802
pci 0000:3d:00.0: reg 0x10: [mem 0xdf100000-0xdf103fff 64bit]
pci 0000:00:1d.4: PCI bridge to [bus 3d]
pci 0000:00:1d.4: bridge window [mem 0xdf100000-0xdf1fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:00:02.0: vgaarb: no bridge control possible
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x363d2018-0x37ffffff]
e820: reserve RAM buffer [mem 0x373cf000-0x37ffffff]
e820: reserve RAM buffer [mem 0x38f61000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3a561000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3b300000-0x3bffffff]
e820: reserve RAM buffer [mem 0x4bf000000-0x4bfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:04: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0xff00-0xfffe] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-3a] add_size 1000
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xdc5fffff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 3b]
pci 0000:00:1c.5: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1d.0: PCI bridge to [bus 3c]
pci 0000:00:1d.4: PCI bridge to [bus 3d]
pci 0000:00:1d.4: bridge window [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 20 [mem 0x40000000-0xdfffffff window]
pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xc4000000-0xdc5fffff]
pci_bus 0000:02: resource 2 [mem 0x80000000-0xa1ffffff 64bit pref]
pci_bus 0000:3b: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:3d: resource 1 [mem 0xdf100000-0xdf1fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 82456K
DMAR: ACPI device "device:6c" under DMAR at fed91000 as 00:15.0
DMAR: ACPI device "device:6d" under DMAR at fed91000 as 00:15.1
DMAR: ACPI device "device:6e" under DMAR at fed91000 as 00:1e.0
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x323d2000-0x363d2000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0x70000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x5E
intel_idle: state C8 is disabled
intel_idle: state C9 is disabled
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC0] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected]
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x506e3, pf=0x20, revision=0xdc
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (704094351, 533183)->(708840229, -4212695)
registered taskstats version 1
Loading compiled-in X.509 certificates
battery: ACPI: Battery Slot [BAT0] (battery present)
Loaded X.509 cert 'Build time autogenerated kernel key: b0813414fcc3419987047d33238379f216b39162'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'BYD: : 5063cac92fddcaa442d8c09fa4be2884'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 0:664:323
tty tty48: hash matches
rtc_cmos 00:02: setting system clock to 2020-08-19T09:18:55 UTC (1597828735)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2712K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1192K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
hidraw: raw HID events driver (C) Jiri Kosina
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
idma64 idma64.0: Found Intel integrated DMA 64-bit
cryptd: max_cpu_qlen set to 1000
nvme nvme0: pci function 0000:3d:00.0
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
i2c_hid i2c-1532020F:00: i2c-1532020F:00 supply vdd not found, using dummy regulator
i2c_hid i2c-1532020F:00: i2c-1532020F:00 supply vddl not found, using dummy regulator
checking generic (70000000 300000) vs hw (70000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
idma64 idma64.1: Found Intel integrated DMA 64-bit
intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
idma64 idma64.2: Found Intel integrated DMA 64-bit
i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] Panel advertises DPCD backlight support, but VBT disagrees. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=1. If your machine needs this, please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input8
usb 1-1: new full-speed USB device number 2 using xhci_hcd
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: 8/0/0 default/read/poll queues
nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
usb 1-1: New USB device found, idVendor=046d, idProduct=c33b, bcdDevice=15.00
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: K840 Mechanical Corded Keyboard
usb 1-1: Manufacturer: Logitech
usb 1-1: SerialNumber: 0B8838513033
fbcon: i915drmfb (fb0) is primary device
fbcon: Deferring console take-over
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
input: 1532020F:00 06CB:5F41 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-1532020F:00/0018:06CB:5F41.0001/input/input9
hid-generic 0018:06CB:5F41.0001: input,hidraw0: I2C HID v1.00 Mouse [1532020F:00 06CB:5F41] on i2c-1532020F:00
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
usb 1-4: new full-speed USB device number 3 using xhci_hcd
usb 1-4: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM2438-005, fw id: 2049433
usb 1-5: new full-speed USB device number 4 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2592.052 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255ce7dffff, max_idle_ns: 440795315181 ns
clocksource: Switched to clocksource tsc
usb 1-5: New USB device found, idVendor=046d, idProduct=c08b, bcdDevice=27.02
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: G502 HERO Gaming Mouse
usb 1-5: Manufacturer: Logitech
usb 1-5: SerialNumber: 1584386E3733
usb 1-6: new full-speed USB device number 5 using xhci_hcd
input: Synaptics TM2438-005 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-1532020F:00/0018:06CB:5F41.0001/input/input11
hid-rmi 0018:06CB:5F41.0001: input,hidraw0: I2C HID v1.00 Mouse [1532020F:00 06CB:5F41] on i2c-1532020F:00
usb 1-6: New USB device found, idVendor=046d, idProduct=0a87, bcdDevice= 1.12
usb 1-6: New USB device strings: Mfr=3, Product=4, SerialNumber=0
usb 1-6: Product: G935 Gaming Headset
usb 1-6: Manufacturer: Logitech
usb 1-7: new high-speed USB device number 6 using xhci_hcd
usb 1-7: New USB device found, idVendor=0bda, idProduct=579f, bcdDevice= 0.02
usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-7: Product: USB Camera
usb 1-7: Manufacturer: 11121119-000J742WL
usb 1-7: SerialNumber: 200901010001
usb 1-8: new full-speed USB device number 7 using xhci_hcd
usb 1-8: New USB device found, idVendor=1532, idProduct=020f, bcdDevice= 2.00
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-8: Product: Razer Blade
usb 1-8: Manufacturer: Razer
input: Logitech K840 Mechanical Corded Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C33B.0002/input/input12
hid-generic 0003:046D:C33B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech K840 Mechanical Corded Keyboard] on usb-0000:00:14.0-1/input0
input: Logitech K840 Mechanical Corded Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C33B.0003/input/input13
input: Logitech K840 Mechanical Corded Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C33B.0003/input/input14
hid-generic 0003:046D:C33B.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [Logitech K840 Mechanical Corded Keyboard] on usb-0000:00:14.0-1/input1
input: Logitech G502 HERO Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C08B.0004/input/input17
hid-generic 0003:046D:C08B.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech G502 HERO Gaming Mouse] on usb-0000:00:14.0-5/input0
input: Logitech G502 HERO Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C08B.0005/input/input18
input: Logitech G502 HERO Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C08B.0005/input/input19
input: Logitech G502 HERO Gaming Mouse System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C08B.0005/input/input20
hid-generic 0003:046D:C08B.0005: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [Logitech G502 HERO Gaming Mouse] on usb-0000:00:14.0-5/input1
input: Logitech G935 Gaming Headset Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.3/0003:046D:0A87.0006/input/input23
input: Logitech G935 Gaming Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.3/0003:046D:0A87.0006/input/input24
input: Logitech G935 Gaming Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.3/0003:046D:0A87.0006/input/input26
hid-generic 0003:046D:0A87.0006: input,hiddev2,hidraw5: USB HID v1.11 Device [Logitech G935 Gaming Headset] on usb-0000:00:14.0-6/input3
usbhid 1-8:1.0: can't add hid device: -71
usbhid: probe of 1-8:1.0 failed with error -71
usbhid 1-8:1.1: can't add hid device: -71
usbhid: probe of 1-8:1.1 failed with error -71
usbhid 1-8:1.2: can't add hid device: -71
usbhid: probe of 1-8:1.2 failed with error -71
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
system76_acpi: loading out-of-tree module taints kernel.
system76_acpi: module verification failed: signature and/or required key missing - tainting kernel
system76: Model does not utilize this driver
usbcore: registered new interface driver system76-io
raid6: avx2x4 gen() 33779 MB/s
raid6: avx2x4 xor() 19987 MB/s
raid6: avx2x2 gen() 30468 MB/s
raid6: avx2x2 xor() 19215 MB/s
raid6: avx2x1 gen() 25020 MB/s
raid6: avx2x1 xor() 17661 MB/s
raid6: sse2x4 gen() 14314 MB/s
raid6: sse2x4 xor() 8819 MB/s
raid6: sse2x2 gen() 12371 MB/s
raid6: sse2x2 xor() 8323 MB/s
raid6: sse2x1 gen() 11008 MB/s
raid6: sse2x1 xor() 6288 MB/s
raid6: using algorithm avx2x4 gen() 33779 MB/s
raid6: .... xor() 19987 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
EXT4-fs (nvme0n1p9): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: Successfully credited entropy passed from boot loader.
systemd[1]: systemd 245.4-4ubuntu3.2pop1~1596049172~20.04~c9d8f2b running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice Cryptsetup Units Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Started Nameserver information manager.
systemd[1]: Reached target Network (Pre).
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
EXT4-fs (nvme0n1p9): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
lp: driver loaded but no devices found
systemd[1]: Finished Load/Save Random Seed.
ppdev: user-space parallel port driver
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Started Journal Service.
systemd-journald[456]: Received client request to flush runtime journal.
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
uvcvideo: Found UVC 1.00 device USB Camera (0bda:579f)
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
input: USB Camera: USB Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input34
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
dw-apb-uart.2: ttyS4 at MMIO 0xdf329000 (irq = 20, base_baud = 115200) is a 16550A
usbcore: registered new interface driver snd-usb-audio
usbcore: registered new interface driver btusb
Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
Bluetooth: hci0: Device revision is 16
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:3b:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:3b:00.0: Found debug destination: EXTERNAL_DRAM
iwlwifi 0000:3b:00.0: Found debug configuration: 0
iwlwifi 0000:3b:00.0: loaded firmware version 36.77d01142.0 op_mode iwlmvm
iwlwifi 0000:3b:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
iwlwifi 0000:3b:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:3b:00.0: Allocated 0x00400000 bytes for firmware monitor.
audit: type=1400 audit(1597828741.185:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=638 comm="apparmor_parser"
audit: type=1400 audit(1597828741.185:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=638 comm="apparmor_parser"
audit: type=1400 audit(1597828741.185:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1597828741.185:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=640 comm="apparmor_parser"
audit: type=1400 audit(1597828741.185:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=640 comm="apparmor_parser"
audit: type=1400 audit(1597828741.185:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=640 comm="apparmor_parser"
audit: type=1400 audit(1597828741.189:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=644 comm="apparmor_parser"
audit: type=1400 audit(1597828741.189:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=645 comm="apparmor_parser"
audit: type=1400 audit(1597828741.193:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser"
audit: type=1400 audit(1597828741.193:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=642 comm="apparmor_parser"
iwlwifi 0000:3b:00.0: base HW address: cc:2f:71:cd:5e:ce
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone4: failed to read out thermal zone (-61)
mei 0000:00:16.0-55213584-9a29-4916-badf-0fb7ed682aeb: Could not read FW version
mei 0000:00:16.0-55213584-9a29-4916-badf-0fb7ed682aeb: FW version command failed -5
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
iwlwifi 0000:3b:00.0 wlp59s0: renamed from wlan0
Adding 10757624k swap on /dev/mapper/cryptswap. Priority:-2 extents:1 across:10757624k SSFS
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input35
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
iwlwifi 0000:3b:00.0: Applying debug destination EXTERNAL_DRAM
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=none,decodes=io+mem:owns=io+mem
iwlwifi 0000:3b:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:3b:00.0: FW already configured (0) - re-configuring
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1432675 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 11740 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
NET: Registered protocol family 38
rfkill: input handler disabled
wlp59s0: authenticate with 2e:ec:da:1e:82:cc
wlp59s0: send auth to 2e:ec:da:1e:82:cc (try 1/3)
wlp59s0: authenticated
wlp59s0: associate with 2e:ec:da:1e:82:cc (try 1/3)
wlp59s0: RX AssocResp from 2e:ec:da:1e:82:cc (capab=0x411 status=0 aid=2)
wlp59s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp59s0: link becomes ready
rfkill: input handler enabled
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
pci 0000:02:00.0: [8086:1576] type 01 class 0x060400
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: [8086:1576] type 01 class 0x060400
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: [8086:1576] type 01 class 0x060400
pci 0000:03:01.0: enabling Extended Tags
pci 0000:03:01.0: supports D1 D2
pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:02.0: [8086:1576] type 01 class 0x060400
pci 0000:03:02.0: enabling Extended Tags
pci 0000:03:02.0: supports D1 D2
pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03-3a]
pci 0000:02:00.0: bridge window [mem 0xc4000000-0xdc5fffff]
pci 0000:02:00.0: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
pci 0000:04:00.0: [8086:1575] type 00 class 0x088000
pci 0000:04:00.0: reg 0x10: [mem 0xdc500000-0xdc53ffff]
pci 0000:04:00.0: reg 0x14: [mem 0xdc540000-0xdc540fff]
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [mem 0xdc500000-0xdc5fffff]
pci 0000:03:01.0: PCI bridge to [bus 05-39]
pci 0000:03:01.0: bridge window [mem 0xc4000000-0xdc3fffff]
pci 0000:03:01.0: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
pci 0000:3a:00.0: [8086:15b5] type 00 class 0x0c0330
pci 0000:3a:00.0: reg 0x10: [mem 0xdc400000-0xdc40ffff]
pci 0000:3a:00.0: supports D1 D2
pci 0000:3a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:3a:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:03:02.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
pci 0000:03:02.0: PCI bridge to [bus 3a]
pci 0000:03:02.0: bridge window [mem 0xdc400000-0xdc4fffff]
pci_bus 0000:03: Allocating resources
pci 0000:03:01.0: bridge window [io 0x1000-0x0fff] to [bus 05-39] add_size 1000
pci 0000:03:02.0: bridge window [io 0x1000-0x0fff] to [bus 3a] add_size 1000
pci 0000:03:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3a] add_size 200000 add_align 100000
pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-3a] add_size 3000
pci 0000:02:00.0: BAR 13: no space for [io size 0x3000]
pci 0000:02:00.0: BAR 13: failed to assign [io size 0x3000]
pci 0000:02:00.0: BAR 13: no space for [io size 0x3000]
pci 0000:02:00.0: BAR 13: failed to assign [io size 0x3000]
pci 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:03:01.0: BAR 13: no space for [io size 0x1000]
pci 0000:03:01.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:03:02.0: BAR 13: no space for [io size 0x1000]
pci 0000:03:02.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:03:02.0: BAR 13: no space for [io size 0x1000]
pci 0000:03:02.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:03:01.0: BAR 13: no space for [io size 0x1000]
pci 0000:03:01.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [mem 0xdc500000-0xdc5fffff]
pci 0000:03:01.0: PCI bridge to [bus 05-39]
pci 0000:03:01.0: bridge window [mem 0xc4000000-0xdc3fffff]
pci 0000:03:01.0: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
pci 0000:03:02.0: PCI bridge to [bus 3a]
pci 0000:03:02.0: bridge window [mem 0xdc400000-0xdc4fffff]
pci 0000:02:00.0: PCI bridge to [bus 03-3a]
pci 0000:02:00.0: bridge window [mem 0xc4000000-0xdc5fffff]
pci 0000:02:00.0: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
xhci_hcd 0000:3a:00.0: xHCI Host Controller
xhci_hcd 0000:3a:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:3a:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb3: SerialNumber: 0000:3a:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:3a:00.0: xHCI Host Controller
xhci_hcd 0000:3a:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:3a:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb4: SerialNumber: 0000:3a:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
rfkill: input handler disabled
xhci_hcd 0000:3a:00.0: Refused to change power state, currently in D3
xhci_hcd 0000:3a:00.0: Refused to change power state, currently in D3
xhci_hcd 0000:3a:00.0: Controller not ready at resume -19
xhci_hcd 0000:3a:00.0: PCI post-resume error -19!
xhci_hcd 0000:3a:00.0: HC died; cleaning up
xhci_hcd 0000:3a:00.0: remove, state 4
usb usb4: USB disconnect, device number 1
xhci_hcd 0000:3a:00.0: USB bus 4 deregistered
xhci_hcd 0000:3a:00.0: remove, state 4
usb usb3: USB disconnect, device number 1
xhci_hcd 0000:3a:00.0: Host halt failed, -19
xhci_hcd 0000:3a:00.0: Host not accessible, reset failed.
xhci_hcd 0000:3a:00.0: USB bus 3 deregistered
pci_bus 0000:03: Allocating resources
pcieport 0000:03:01.0: bridge window [io 0x1000-0x0fff] to [bus 05-39] add_size 1000
pcieport 0000:03:02.0: bridge window [io 0x1000-0x0fff] to [bus 3a] add_size 1000
pcieport 0000:03:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3a] add_size 200000 add_align 100000
pcieport 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-3a] add_size 3000
pcieport 0000:02:00.0: BAR 13: no space for [io size 0x3000]
pcieport 0000:02:00.0: BAR 13: failed to assign [io size 0x3000]
pcieport 0000:02:00.0: BAR 13: no space for [io size 0x3000]
pcieport 0000:02:00.0: BAR 13: failed to assign [io size 0x3000]
pcieport 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:03:01.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:03:01.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:03:02.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:03:02.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:03:02.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:03:02.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:03:01.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:03:01.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:03:00.0: Refused to change power state, currently in D3
pci_bus 0000:04: busn_res: [bus 04] is released
pci_bus 0000:05: busn_res: [bus 05-39] is released
pci_bus 0000:3a: busn_res: [bus 3a] is released
pci_bus 0000:03: busn_res: [bus 03-3a] is released
mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU6: Core temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: CPU2: Core temperature/speed normal
mce: CPU6: Core temperature/speed normal
mce: CPU1: Package temperature/speed normal
mce: CPU5: Package temperature/speed normal
mce: CPU4: Package temperature/speed normal
mce: CPU0: Package temperature/speed normal
mce: CPU3: Package temperature/speed normal
mce: CPU7: Package temperature/speed normal
mce: CPU6: Package temperature/speed normal
mce: CPU2: Package temperature/speed normal
usb 1-6: USB disconnect, device number 5
usb 1-6: new full-speed USB device number 8 using xhci_hcd
usb 1-6: New USB device found, idVendor=046d, idProduct=0a87, bcdDevice= 1.12
usb 1-6: New USB device strings: Mfr=3, Product=4, SerialNumber=0
usb 1-6: Product: G935 Gaming Headset
usb 1-6: Manufacturer: Logitech
input: Logitech G935 Gaming Headset Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.3/0003:046D:0A87.0007/input/input36
input: Logitech G935 Gaming Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.3/0003:046D:0A87.0007/input/input37
input: Logitech G935 Gaming Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.3/0003:046D:0A87.0007/input/input39
hid-generic 0003:046D:0A87.0007: input,hiddev2,hidraw5: USB HID v1.11 Device [Logitech G935 Gaming Headset] on usb-0000:00:14.0-6/input3
mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 55)
mce: CPU6: Core temperature above threshold, cpu clock throttled (total events = 55)
mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 59)
mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 59)
mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 59)
mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 59)
mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 59)
mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 59)
mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 59)
mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 59)
mce: CPU6: Core temperature/speed normal
mce: CPU2: Core temperature/speed normal
mce: CPU4: Package temperature/speed normal
mce: CPU0: Package temperature/speed normal
mce: CPU1: Package temperature/speed normal
mce: CPU5: Package temperature/speed normal
mce: CPU7: Package temperature/speed normal
mce: CPU3: Package temperature/speed normal
mce: CPU2: Package temperature/speed normal
mce: CPU6: Package temperature/speed normal
intel_powerclamp: Start idle injection to reduce power
NOHZ: local_softirq_pending 202
NOHZ: local_softirq_pending 202
NOHZ: local_softirq_pending 202
NOHZ: local_softirq_pending 202
NOHZ: local_softirq_pending 202
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
NOHZ: local_softirq_pending 282
NOHZ: local_softirq_pending 282
NOHZ: local_softirq_pending 282
NOHZ: local_softirq_pending 282
NOHZ: local_softirq_pending 282
intel_powerclamp: Stop forced idle injection