dmesg - AIO_STRESS
microcode: microcode updated early to revision 0xd6, date = 2020-04-27
Linux version 5.4.0-7634-generic (buildd@lcy01-amd64-029) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #38~1596560323~20.04~7719dbd-Ubuntu SMP Tue Aug 4 19:12:34 UTC 2 (Ubuntu 5.4.0-7634.38~1596560323~20.04~7719dbd-generic 5.4.41)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000030fff] usable
BIOS-e820: [mem 0x0000000000031000-0x0000000000031fff] reserved
BIOS-e820: [mem 0x0000000000032000-0x0000000000087fff] usable
BIOS-e820: [mem 0x0000000000088000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007a99dfff] usable
BIOS-e820: [mem 0x000000007a99e000-0x000000007b59dfff] reserved
BIOS-e820: [mem 0x000000007b59e000-0x000000007bc8dfff] ACPI NVS
BIOS-e820: [mem 0x000000007bc8e000-0x000000007bd0dfff] ACPI data
BIOS-e820: [mem 0x000000007bd0e000-0x000000007bd0efff] usable
BIOS-e820: [mem 0x000000007bd0f000-0x000000007f7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff500000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027e7fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x5fbd0018-0x5fbf9857] usable ==> usable
e820: update [mem 0x5fbd0018-0x5fbf9857] usable ==> usable
e820: update [mem 0x5fbbf018-0x5fbcf057] usable ==> usable
e820: update [mem 0x5fbbf018-0x5fbcf057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000030fff] usable
reserve setup_data: [mem 0x0000000000031000-0x0000000000031fff] reserved
reserve setup_data: [mem 0x0000000000032000-0x0000000000087fff] usable
reserve setup_data: [mem 0x0000000000088000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000005fbbf017] usable
reserve setup_data: [mem 0x000000005fbbf018-0x000000005fbcf057] usable
reserve setup_data: [mem 0x000000005fbcf058-0x000000005fbd0017] usable
reserve setup_data: [mem 0x000000005fbd0018-0x000000005fbf9857] usable
reserve setup_data: [mem 0x000000005fbf9858-0x000000007a99dfff] usable
reserve setup_data: [mem 0x000000007a99e000-0x000000007b59dfff] reserved
reserve setup_data: [mem 0x000000007b59e000-0x000000007bc8dfff] ACPI NVS
reserve setup_data: [mem 0x000000007bc8e000-0x000000007bd0dfff] ACPI data
reserve setup_data: [mem 0x000000007bd0e000-0x000000007bd0efff] usable
reserve setup_data: [mem 0x000000007bd0f000-0x000000007f7fffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
reserve setup_data: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff500000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000027e7fffff] usable
efi: EFI v2.60 by INSYDE Corp.
efi: TPMFinalLog=0x7b596000 ACPI 2.0=0x7bd0d014 SMBIOS=0x7ad56000 SMBIOS 3.0=0x7ad54000 ESRT=0x7ad52898 MEMATTR=0x6af7f018 TPMEventLog=0x64797018
secureboot: Secure boot disabled
SMBIOS 3.0.1 present.
DMI: HP HP Pavilion Gaming Laptop 15-cx0xxx/8478, BIOS F.20 05/07/2019
tsc: Detected 2300.000 MHz processor
tsc: Detected 2299.968 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x27e800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 007E000000 mask 7FFE000000 uncachable
2 base 007D000000 mask 7FFF000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x7bd0f max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000007ad52898 to 0x000000007ad528d0.
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x273a01000, 0x273a01fff] PGTABLE
BRK [0x273a02000, 0x273a02fff] PGTABLE
BRK [0x273a03000, 0x273a03fff] PGTABLE
BRK [0x273a04000, 0x273a04fff] PGTABLE
BRK [0x273a05000, 0x273a05fff] PGTABLE
BRK [0x273a06000, 0x273a06fff] PGTABLE
BRK [0x273a07000, 0x273a07fff] PGTABLE
BRK [0x273a08000, 0x273a08fff] PGTABLE
secureboot: Secure boot disabled
RAMDISK: [mem 0x6cbed000-0x71c71fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007BD0D014 000024 (v02 HPQOEM)
ACPI: XSDT 0x000000007BCEB188 000134 (v01 HPQOEM SLIC-MPC 00000000 HP 01000013)
ACPI: FACP 0x000000007BCE5000 00010C (v05 HPQOEM SLIC-MPC 00000000 HP 00040000)
ACPI: DSDT 0x000000007BCA1000 040C9A (v02 HPQOEM SLIC-MPC 00000000 ACPI 00040000)
ACPI: FACS 0x000000007BC2B000 000040
ACPI: UEFI 0x000000007BD0C000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: SSDT 0x000000007BD08000 0031C7 (v02 HPQOEM INSYDE 00003000 ACPI 00040000)
ACPI: SSDT 0x000000007BD06000 001FD5 (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: SSDT 0x000000007BD04000 0017CB (v02 HPQOEM INSYDE 00003000 ACPI 00040000)
ACPI: SSDT 0x000000007BD03000 0000F5 (v02 HPQOEM INSYDE 00003000 ACPI 00040000)
ACPI: UEFI 0x000000007BD02000 000042 (v01 HPQOEM INSYDE 00000002 HP 00040000)
ACPI: IHIS 0x000000007BD01000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: SSDT 0x000000007BD00000 00045A (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: SSDT 0x000000007BCFF000 000046 (v02 HPQOEM INSYDE 00003000 ACPI 00040000)
ACPI: TPM2 0x000000007BCFE000 000034 (v03 HPQOEM INSYDE 00000002 HP 00040000)
ACPI: SSDT 0x000000007BCFD000 000169 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: SSDT 0x000000007BCF6000 0068AD (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: MSDM 0x000000007BCF5000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: SSDT 0x000000007BCF1000 003ACD (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: LPIT 0x000000007BCF0000 00005C (v01 HPQOEM INSYDE 00000000 HP 00040000)
ACPI: WSMT 0x000000007BCEF000 000028 (v01 HPQOEM INSYDE 00000000 HP 00040000)
ACPI: SSDT 0x000000007BCEE000 000C2F (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: SSDT 0x000000007BCED000 000FBB (v02 HPQOEM INSYDE 00000000 ACPI 00040000)
ACPI: DBGP 0x000000007BCEC000 000034 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000)
ACPI: DBG2 0x000000007BCEA000 000054 (v00 HPQOEM INSYDE 00000002 HP 00040000)
ACPI: SSDT 0x000000007BCE8000 001983 (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: ASF! 0x000000007BCE7000 0000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: ECDT 0x000000007BCE6000 000069 (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: HPET 0x000000007BCE4000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: APIC 0x000000007BCE3000 00012C (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: MCFG 0x000000007BCE2000 00003C (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: SSDT 0x000000007BCA0000 000124 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: SSDT 0x000000007BC9F000 000F30 (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: SSDT 0x000000007BC9A000 00400E (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: SSDT 0x000000007BC99000 000123 (v02 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: DMAR 0x000000007BC98000 000108 (v01 HPQOEM INSYDE 00000002 HP 00040000)
ACPI: FPDT 0x000000007BC97000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000)
ACPI: BGRT 0x000000007BC96000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027e7fffff]
NODE_DATA(0) allocated [mem 0x27e7d5000-0x27e7fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000027e7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000030fff]
node 0: [mem 0x0000000000032000-0x0000000000087fff]
node 0: [mem 0x0000000000100000-0x000000007a99dfff]
node 0: [mem 0x000000007bd0e000-0x000000007bd0efff]
node 0: [mem 0x0000000100000000-0x000000027e7fffff]
Zeroed struct page in unavailable ranges: 28379 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000027e7fffff]
On node 0 totalpages: 2068773
DMA zone: 64 pages used for memmap
DMA zone: 107 pages reserved
DMA zone: 3974 pages, LIFO batch:0
DMA32 zone: 7783 pages used for memmap
DMA32 zone: 498079 pages, LIFO batch:63
Normal zone: 24480 pages used for memmap
Normal zone: 1566720 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x7d800000-0x7f7fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x6b03f000-0x6b052fff] usable ==> reserved
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00031000-0x00031fff]
PM: Registered nosave memory: [mem 0x00088000-0x000fffff]
PM: Registered nosave memory: [mem 0x5fbbf000-0x5fbbffff]
PM: Registered nosave memory: [mem 0x5fbcf000-0x5fbcffff]
PM: Registered nosave memory: [mem 0x5fbd0000-0x5fbd0fff]
PM: Registered nosave memory: [mem 0x5fbf9000-0x5fbf9fff]
PM: Registered nosave memory: [mem 0x6b03f000-0x6b052fff]
PM: Registered nosave memory: [mem 0x7a99e000-0x7b59dfff]
PM: Registered nosave memory: [mem 0x7b59e000-0x7bc8dfff]
PM: Registered nosave memory: [mem 0x7bc8e000-0x7bd0dfff]
PM: Registered nosave memory: [mem 0x7bd0f000-0x7f7fffff]
PM: Registered nosave memory: [mem 0x7f800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff4fffff]
PM: Registered nosave memory: [mem 0xff500000-0xffffffff]
[mem 0x7f800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 2036339
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7770072K/8275092K available (14339K kernel code, 2397K rwdata, 4952K rodata, 2712K init, 4992K bss, 505020K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 44480 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000007b575000 end: 0x0000007b594fff
DMAR: RMRR base: 0x0000007d000000 end: 0x0000007f7fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212717146a7, max_idle_ns: 440795291431 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4599.93 BogoMIPS (lpj=9199872)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-8300H CPU @ 2.30GHz (family: 0x6, model: 0x9e, stepping: 0xa)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4
MDS CPU bug present and SMT on, data leak possible. See for more details.
#5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (36799.48 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x7b59e000-0x7bc8dfff] (7274496 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 14:42:40, date: 2020-08-09
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1596984160.040:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.PEG0.PEGP._ON], AE_ALREADY_EXISTS (20190816/dswload2-326)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-220)
ACPI: Skipping parse of AML opcode: Method (0x0014)
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.PEG0.PEGP._OFF], AE_ALREADY_EXISTS (20190816/dswload2-326)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-220)
ACPI: Skipping parse of AML opcode: Method (0x0014)
ACPI: 17 ACPI AML tables successfully acquired and loaded
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \: Used as first EC
ACPI: \: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: Boot ECDT EC used to handle transactions
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95C3F4288000 0005DF (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95C3F4780000 000386 (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95C3F478A200 00010A (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95C3F428C800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95C3F4409000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95C3F4781C00 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95C3F4785000 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [V0PR] (on)
ACPI: Power Resource [V1PR] (on)
ACPI: Power Resource [V2PR] (on)
Initialized Local Variables for Method [_CRS]:
Local0: 00000000676bc1c2 Integer 0000000000000000
Local1: 000000008e28cab1 Integer 0000000000000000
No Arguments are initialized for method [_CRS]
ACPI Error: Aborting method \_SB.PCI0.SPI1.FPNT._CRS due to previous error (AE_AML_INVALID_RESOURCE_TYPE) (20190816/psparse-529)
ACPI Error: Method execution failed \_SB.PCI0.SPI1.FPNT._CRS due to previous error (AE_AML_INVALID_RESOURCE_TYPE) (20190816/uteval-68)
Initialized Local Variables for Method [_CRS]:
Local0: 000000002aa0f0d1 Integer 0000000000000000
Local1: 00000000ba0d1b02 Integer 0000000000000000
No Arguments are initialized for method [_CRS]
ACPI Error: Aborting method \_SB.PCI0.SPI2.FPNT._CRS due to previous error (AE_AML_INVALID_RESOURCE_TYPE) (20190816/psparse-529)
ACPI Error: Method execution failed \_SB.PCI0.SPI2.FPNT._CRS due to previous error (AE_AML_INVALID_RESOURCE_TYPE) (20190816/uteval-68)
ACPI: Power Resource [WRST] (on)
acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: Power Resource [PIN] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x7f800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3e10] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3e9b] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb2000000-0xb2ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xb4610000-0xb4617fff 64bit]
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xb4620000-0xb4620fff 64bit]
pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
pci 0000:00:12.0: reg 0x10: [mem 0xb4621000-0xb4621fff 64bit]
pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb4600000-0xb460ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0xb461c000-0xb461dfff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0xb4622000-0xb4622fff 64bit]
pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb4623000-0xb4623fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a353] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xb461e000-0xb461ffff]
pci 0000:00:17.0: reg 0x14: [mem 0xb4627000-0xb46270ff]
pci 0000:00:17.0: reg 0x18: [io 0x6080-0x6087]
pci 0000:00:17.0: reg 0x1c: [io 0x6088-0x608b]
pci 0000:00:17.0: reg 0x20: [io 0x6060-0x607f]
pci 0000:00:17.0: reg 0x24: [mem 0xb4626000-0xb46267ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a342] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PTM enabled (root), 4ns granularity
pci 0000:00:1b.3: [8086:a343] type 01 class 0x060400
pci 0000:00:1b.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.3: PTM enabled (root), 4ns granularity
pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
pci 0000:00:1d.4: [8086:a334] type 01 class 0x060400
pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.4: PTM enabled (root), 4ns granularity
pci 0000:00:1f.0: [8086:a30d] type 00 class 0x060100
pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xb4618000-0xb461bfff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xb4100000-0xb41fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xb4624000-0xb46240ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0x6040-0x605f]
pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:01:00.0: [10de:1c8c] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xb3000000-0xb3ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: Enabling HDA controller
pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xb4000000-0xb4003fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xb3000000-0xb40fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
pci 0000:02:00.0: [10ec:b822] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [io 0x4000-0x40ff]
pci 0000:02:00.0: reg 0x18: [mem 0xb4500000-0xb450ffff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1b.0: bridge window [mem 0xb4500000-0xb45fffff]
pci 0000:03:00.0: [1aea:6625] type 00 class 0xff0000
pci 0000:03:00.0: reg 0x10: [mem 0xb4400000-0xb4400fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1b.3: PCI bridge to [bus 03]
pci 0000:00:1b.3: bridge window [mem 0xb4400000-0xb44fffff]
pci 0000:04:00.0: [1344:5405] type 00 class 0x010802
pci 0000:04:00.0: reg 0x10: [mem 0xb4300000-0xb4303fff 64bit]
pci 0000:04:00.0: enabling Extended Tags
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.0: bridge window [mem 0xb4300000-0xb43fffff]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:05:00.0: reg 0x18: [mem 0xb4204000-0xb4204fff 64bit]
pci 0000:05:00.0: reg 0x20: [mem 0xb4200000-0xb4203fff 64bit]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1d.4: PCI bridge to [bus 05]
pci 0000:00:1d.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.4: bridge window [mem 0xb4200000-0xb42fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:00:02.0: vgaarb: no bridge control possible
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00031000-0x0003ffff]
e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
e820: reserve RAM buffer [mem 0x5fbbf018-0x5fffffff]
e820: reserve RAM buffer [mem 0x5fbd0018-0x5fffffff]
e820: reserve RAM buffer [mem 0x6b03f000-0x6bffffff]
e820: reserve RAM buffer [mem 0x7a99e000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bd0f000-0x7bffffff]
e820: reserve RAM buffer [mem 0x27e800000-0x27fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x1800-0x18fe] has been reserved
system 00:00: [mem 0xfd000000-0xfd69ffff] has been reserved
system 00:00: [mem 0xfd6c0000-0xfd6cffff] has been reserved
system 00:00: [mem 0xfd6f0000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:00: [mem 0xfe200000-0xfe7fffff] has been reserved
system 00:00: [mem 0xff000000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x2000-0x20fe] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: [io 0xfd60-0xfd63] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs ETD0736 PNP0f03 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: BAR 6: assigned [mem 0xb4080000-0xb40fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xb3000000-0xb40fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1b.0: bridge window [mem 0xb4500000-0xb45fffff]
pci 0000:00:1b.3: PCI bridge to [bus 03]
pci 0000:00:1b.3: bridge window [mem 0xb4400000-0xb44fffff]
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.0: bridge window [mem 0xb4300000-0xb43fffff]
pci 0000:00:1d.4: PCI bridge to [bus 05]
pci 0000:00:1d.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.4: bridge window [mem 0xb4200000-0xb42fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x7f800000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0xb3000000-0xb40fffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xb4500000-0xb45fffff]
pci_bus 0000:03: resource 1 [mem 0xb4400000-0xb44fffff]
pci_bus 0000:04: resource 1 [mem 0xb4300000-0xb43fffff]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xb4200000-0xb42fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 82452K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x66f7f000-0x6af7f000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:1b.0: AER: enabled with IRQ 123
pcieport 0000:00:1b.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
pcieport 0000:00:1b.3: AER: enabled with IRQ 124
pcieport 0000:00:1b.3: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
pcieport 0000:00:1d.0: AER: enabled with IRQ 125
pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
pcieport 0000:00:1d.4: AER: enabled with IRQ 126
pcieport 0000:00:1d.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0x80000000, using 8100k, total 8100k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ACAD] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [TZ02] (10 C)
battery: ACPI: Battery Slot [BAT1] (battery present)
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb: port power management may be unreliable
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x906ea, pf=0x20, revision=0xd6
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (747532087, 8782073)->(766932145, -10617985)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: b0813414fcc3419987047d33238379f216b39162'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7'
ima: Allocated hash algorithm: sha1
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: Error Communicating to TPM chip
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 0:856:737
rtc_cmos 00:03: setting system clock to 2020-08-09T14:42:41 UTC (1596984161)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2712K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1192K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
wmi_bus wmi_bus-PNP0C14:04: WQBJ data block query control method not found
ahci 0000:00:17.0: version 3.0
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x20 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
usb 1-3: new full-speed USB device number 2 using xhci_hcd
nvme nvme0: pci function 0000:04:00.0
scsi host0: ahci
scsi host1: ahci
cryptd: max_cpu_qlen set to 1000
libphy: r8169: probed
r8169 0000:05:00.0 eth0: RTL8168h/8111h, b0:0c:d1:ed:4a:17, XID 541, IRQ 130
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xb4626000 port 0xb4626380 irq 128
r8169 0000:05:00.0 eno1: renamed from eth0
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
checking generic (80000000 7e9000) vs hw (80000000 20000000)
fb0: switching to inteldrmfb from EFI VGA
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
fbcon: i915drmfb (fb0) is primary device
fbcon: Deferring console take-over
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
usb 1-3: New USB device found, idVendor=03f0, idProduct=a407, bcdDevice= 3.21
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: HP Link-5 micro dongle
usb 1-3: Manufacturer: HP
nvme nvme0: 8/0/0 default/read/poll queues
nvme0n1: p1 p2 p3 p4
usb 1-5: new high-speed USB device number 3 using xhci_hcd
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ATA-9: HGST HTS721010A9E630, JB0OA3T0, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA HGST HTS721010A9 A3T0 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 5:0:0:0: [sda] 4096-byte physical blocks
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda7 sda8
sd 5:0:0:0: [sda] Attached SCSI disk
usb 1-5: New USB device found, idVendor=04ca, idProduct=707f, bcdDevice= 0.03
usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-5: Product: HP Wide Vision HD Camera
usb 1-5: Manufacturer: DHKQF019IBBAZA
usb 1-5: SerialNumber: 200901010001
psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x4d5f02)
psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x1a, 0x0d.
psmouse serio1: elantech: Elan sample query result 04, 4d, 86
usb 1-14: new full-speed USB device number 4 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2304.001 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f8984a8, max_idle_ns: 440795232764 ns
clocksource: Switched to clocksource tsc
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
usb 1-14: New USB device found, idVendor=0bda, idProduct=b00b, bcdDevice= 1.10
usb 1-14: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-14: Product: Bluetooth Radio
usb 1-14: Manufacturer: Realtek
usb 1-14: SerialNumber: 00e04c000001
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:03F0:A407.0001/input/input8
hid-generic 0003:03F0:A407.0001: input,hidraw0: USB HID v1.11 Keyboard [HP HP Link-5 micro dongle] on usb-0000:00:14.0-3/input0
input: HP HP Link-5 micro dongle Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:03F0:A407.0002/input/input9
input: HP HP Link-5 micro dongle Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:03F0:A407.0002/input/input10
input: HP HP Link-5 micro dongle System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:03F0:A407.0002/input/input11
hid-generic 0003:03F0:A407.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [HP HP Link-5 micro dongle] on usb-0000:00:14.0-3/input1
system76_acpi: loading out-of-tree module taints kernel.
system76_acpi: module verification failed: signature and/or required key missing - tainting kernel
system76: Model does not utilize this driver
usbcore: registered new interface driver system76-io
raid6: avx2x4 gen() 40231 MB/s
raid6: avx2x4 xor() 25566 MB/s
raid6: avx2x2 gen() 34976 MB/s
raid6: avx2x2 xor() 21980 MB/s
raid6: avx2x1 gen() 28248 MB/s
raid6: avx2x1 xor() 20267 MB/s
raid6: sse2x4 gen() 16550 MB/s
raid6: sse2x4 xor() 10423 MB/s
raid6: sse2x2 gen() 14267 MB/s
raid6: sse2x2 xor() 9563 MB/s
raid6: sse2x1 gen() 12650 MB/s
raid6: sse2x1 xor() 7220 MB/s
raid6: using algorithm avx2x4 gen() 40231 MB/s
raid6: .... xor() 25566 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: Successfully credited entropy passed from boot loader.
systemd[1]: systemd 245.4-4ubuntu3.2pop1~1596049172~20.04~c9d8f2b running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice Cryptsetup Units Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Started Nameserver information manager.
systemd[1]: Reached target Network (Pre).
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
EXT4-fs (nvme0n1p3): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
lp: driver loaded but no devices found
systemd[1]: Finished Load/Save Random Seed.
ppdev: user-space parallel port driver
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting Mount unit for bing-wall, revision 12...
systemd[1]: Mounting Mount unit for core, revision 9665...
systemd[1]: Mounting Mount unit for core18, revision 1885...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1506...
systemd[1]: Mounting Mount unit for hello-world, revision 29...
systemd[1]: Mounting Mount unit for qt551, revision 30...
systemd[1]: Started Journal Service.
systemd-journald[492]: Received client request to flush runtime journal.
input: HP Wireless hotkeys as /devices/virtual/input/input12
hp_accel: laptop model unknown, using default axes configuration
lis3lv02d: unknown sensor type 0x0
hp_accel: probe of HPQ6007:00 failed with error -22
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain dram
proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
IPMI message handler: version 39.2
ipmi device interface
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
cfg80211: Loading compiled-in X.509 certificates for regulatory database
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
nvidia-nvlink: Nvlink Core is being initialized, major device number 236
nvidia 0000:01:00.0: enabling device (0000 -> 0003)
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
rtw_pci 0000:02:00.0: Firmware version 27.2.0, H2C version 13
usbcore: registered new interface driver btusb
Bluetooth: hci0: RTL: examining hci_ver=07 hci_rev=000b lmp_ver=07 lmp_subver=8822
uvcvideo: Found UVC 1.00 device HP Wide Vision HD Camera (04ca:707f)
Bluetooth: hci0: RTL: rom_version status=0 version=2
Bluetooth: hci0: RTL: loading rtl_bt/rtl8822b_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8822b_config.bin
Bluetooth: hci0: RTL: cfg_sz 14, total sz 20270
uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
input: HP Wide Vision HD Camera: HP Wi as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 440.100 Fri May 29 08:45:51 UTC 2020
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC295: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.100 Fri May 29 08:14:04 UTC 2020
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
pcieport 0000:00:1b.3: AER: Multiple Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
pcieport 0000:00:1b.3: AER: device [8086:a343] error status/mask=00001001/00002000
pcieport 0000:00:1b.3: AER: [ 0] RxErr
pcieport 0000:00:1b.3: AER: [12] Timeout
pcieport 0000:00:1b.3: AER: Multiple Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: can't find device of ID00db
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190816/nsarguments-59)
rtw_pci 0000:02:00.0 wlo1: renamed from wlan0
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
audit: type=1400 audit(1596984164.986:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=878 comm="apparmor_parser"
audit: type=1400 audit(1596984164.986:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=880 comm="apparmor_parser"
audit: type=1400 audit(1596984164.986:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=883 comm="apparmor_parser"
audit: type=1400 audit(1596984164.986:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=883 comm="apparmor_parser"
audit: type=1400 audit(1596984164.990:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=884 comm="apparmor_parser"
audit: type=1400 audit(1596984164.990:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=881 comm="apparmor_parser"
audit: type=1400 audit(1596984164.990:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=881 comm="apparmor_parser"
audit: type=1400 audit(1596984164.990:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=882 comm="apparmor_parser"
audit: type=1400 audit(1596984164.990:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=882 comm="apparmor_parser"
Bluetooth: hci0: RTL: fw version 0xab6b705c
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
input: HP WMI hotkeys as /devices/virtual/input/input13
Adding 4193784k swap on /dev/mapper/cryptswap. Priority:-2 extents:1 across:4193784k SSFS
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
kauditd_printk_skb: 30 callbacks suppressed
audit: type=1400 audit(1596984165.706:41): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1132 comm="cups-browsed" capability=23 capname="sys_nice"
NET: Registered protocol family 38
nvidia-uvm: Loaded the UVM driver, major device number 511.
Generic FE-GE Realtek PHY r8169-500:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-500:00, irq=IGNORE)
r8169 0000:05:00.0 eno1: Link is Down
rtw_pci 0000:02:00.0: start vif 48:5f:99:03:98:91 on port 0
rfkill: input handler disabled
wlo1: authenticate with d0:6e:de:1c:c5:cb
wlo1: send auth to d0:6e:de:1c:c5:cb (try 1/3)
wlo1: authenticated
wlo1: associate with d0:6e:de:1c:c5:cb (try 1/3)
wlo1: RX AssocResp from d0:6e:de:1c:c5:cb (capab=0x11 status=0 aid=1)
rtw_pci 0000:02:00.0: sta d0:6e:de:1c:c5:cb joined with macid 0
wlo1: associated
wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by d0:6e:de:1c:c5:cb
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2304001138 Hz
vboxdrv: Successfully loaded version 6.1.10_Ubuntu (interface 0x002d0001)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x11) (20190816/exoparg2-393)
No Local Variables are initialized for Method [GINF]
Initialized Arguments for Method [GINF]: (2 arguments defined for method invocation)
Arg0: 000000001a9009cb Integer 00000000000000FF
Arg1: 000000004f64af1a Integer 0000000000000000
ACPI Error: Aborting method \_SB.GINF due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
ACPI Error: Aborting method \_SB.GADR due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
ACPI Error: Aborting method \_SB.SGOV due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
ACPI Error: Aborting method \_SB.CGWR due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
ACPI Error: Aborting method \_SB.TBFP due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
ACPI Error: Aborting method \_SB.WMTF.WMTF due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x11) (20190816/exoparg2-393)
No Local Variables are initialized for Method [GINF]
Initialized Arguments for Method [GINF]: (2 arguments defined for method invocation)
Arg0: 000000005b04f7af Integer 00000000000000FF
Arg1: 00000000e44f7657 Integer 0000000000000000
ACPI Error: Aborting method \_SB.GINF due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
ACPI Error: Aborting method \_SB.GADR due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
ACPI Error: Aborting method \_SB.SGOV due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
ACPI Error: Aborting method \_SB.CGWR due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
ACPI Error: Aborting method \_SB.TBFP due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
ACPI Error: Aborting method \_SB.WMTF.WMTF due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
rfkill: input handler enabled
rfkill: input handler disabled
audit: type=1400 audit(1596984176.122:42): apparmor="DENIED" operation="open" profile="/snap/core/9665/usr/lib/snapd/snap-confine" name="/etc/pop-os/os-release" pid=2649 comm="snap-confine" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1596984176.122:43): apparmor="DENIED" operation="open" profile="/snap/core/9665/usr/lib/snapd/snap-confine" name="/etc/pop-os/os-release" pid=2649 comm="snap-confine" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1596984176.182:44): apparmor="DENIED" operation="capable" profile="/snap/core/9665/usr/lib/snapd/snap-confine" pid=2649 comm="snap-confine" capability=4 capname="fsetid"
audit: type=1400 audit(1596984176.442:45): apparmor="DENIED" operation="open" profile="snap-update-ns.bing-wall" name="/etc/pop-os/os-release" pid=2755 comm="5" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1596984176.506:46): apparmor="DENIED" operation="open" profile="snap-update-ns.bing-wall" name="/etc/pop-os/os-release" pid=2808 comm="5" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1596984176.590:47): apparmor="DENIED" operation="open" profile="snap.bing-wall.bing-wall" name="/etc/pop-os/os-release" pid=2649 comm="snap-exec" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1596984176.610:48): apparmor="DENIED" operation="open" profile="snap.bing-wall.bing-wall" name="/snap/core/9665/usr/share/locale/en_GB/LC_MESSAGES/snappy.mo" pid=2649 comm="snap-exec" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1107 audit(1596984178.534:49): pid=1025 uid=100 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/NetworkManager" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name="org.freedesktop.NetworkManager" pid=2649 label="snap.bing-wall.bing-wall" peer_pid=1027 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=100 hostname=? addr=? terminal=?'
audit: type=1107 audit(1596984178.534:50): pid=1025 uid=100 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/NetworkManager" interface="org.freedesktop.NetworkManager" member="GetDevices" mask="send" name="org.freedesktop.NetworkManager" pid=2649 label="snap.bing-wall.bing-wall" peer_pid=1027 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=100 hostname=? addr=? terminal=?'
audit: type=1107 audit(1596984178.534:51): pid=1025 uid=100 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/NetworkManager/Settings" interface="org.freedesktop.NetworkManager.Settings" member="ListConnections" mask="send" name="org.freedesktop.NetworkManager" pid=2649 label="snap.bing-wall.bing-wall" peer_pid=1027 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=100 hostname=? addr=? terminal=?'
TCP: wlo1: Driver has suspect GRO implementation, TCP performance may be compromised.
pcieport 0000:00:1b.3: AER: Multiple Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
pcieport 0000:00:1b.3: AER: device [8086:a343] error status/mask=00001001/00002000
pcieport 0000:00:1b.3: AER: [ 0] RxErr
pcieport 0000:00:1b.3: AER: [12] Timeout
pcieport 0000:00:1b.3: AER: Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: can't find device of ID00db
pcieport 0000:00:1b.3: AER: Multiple Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: can't find device of ID00db
pcieport 0000:00:1b.3: AER: Multiple Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: can't find device of ID00db
pcieport 0000:00:1b.3: AER: Multiple Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
pcieport 0000:00:1b.3: AER: device [8086:a343] error status/mask=00001001/00002000
pcieport 0000:00:1b.3: AER: [ 0] RxErr
pcieport 0000:00:1b.3: AER: [12] Timeout
pcieport 0000:00:1b.3: AER: Multiple Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: can't find device of ID00db
pcieport 0000:00:1b.3: AER: Multiple Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: can't find device of ID00db
pcieport 0000:00:1b.3: AER: Multiple Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: can't find device of ID00db
pcieport 0000:00:1b.3: AER: Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
pcieport 0000:00:1b.3: AER: device [8086:a343] error status/mask=00001001/00002000
pcieport 0000:00:1b.3: AER: [ 0] RxErr
pcieport 0000:00:1b.3: AER: [12] Timeout
pcieport 0000:00:1b.3: AER: Multiple Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: can't find device of ID00db
pcieport 0000:00:1b.3: AER: Multiple Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: can't find device of ID00db
pcieport 0000:00:1b.3: AER: Multiple Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: can't find device of ID00db
pcieport 0000:00:1b.3: AER: Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: can't find device of ID00db
pcieport 0000:00:1b.3: AER: Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
pcieport 0000:00:1b.3: AER: device [8086:a343] error status/mask=00001001/00002000
pcieport 0000:00:1b.3: AER: [ 0] RxErr
pcieport 0000:00:1b.3: AER: [12] Timeout
pcieport 0000:00:1b.3: AER: Multiple Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: can't find device of ID00db
pcieport 0000:00:1b.3: AER: Multiple Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: can't find device of ID00db
pcieport 0000:00:1b.3: AER: Corrected error received: 0000:00:1b.3
pcieport 0000:00:1b.3: AER: can't find device of ID00db