dmesg - cfs
microcode: microcode updated early to revision 0x26, date = 2019-11-12
Linux version 5.7.7-1-default (geeko@buildhost) (gcc version 10.1.1 20200625 [revision c91e43e9363bd119a695d64505f96539fa451bf2] (SUSE Linux), GNU ld (GNU Binutils; openSUSE Tumbleweed) 2.34.0.20200325-1) #1 SMP Wed Jul 1 19:03:27 UTC 2020 (cba119b)
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cd560fff] usable
BIOS-e820: [mem 0x00000000cd561000-0x00000000dcd3efff] reserved
BIOS-e820: [mem 0x00000000dcd3f000-0x00000000dce7efff] ACPI NVS
BIOS-e820: [mem 0x00000000dce7f000-0x00000000dcefefff] ACPI data
BIOS-e820: [mem 0x00000000dceff000-0x00000000dfa0ffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20A7CTO1WW/20A7CTO1WW, BIOS GRET40WW (1.17 ) 09/02/2014
tsc: Fast TSC calibration using PIT
tsc: Detected 2693.921 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x21e600 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask 7FE0000000 uncachable
1 base 00DE000000 mask 7FFE000000 uncachable
2 base 00DD000000 mask 7FFF000000 uncachable
3 base 00DCF00000 mask 7FFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0xcd561 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f0100-0x000f010f]
check: Scanning 1 areas for low memory corruption
Kernel/User page tables isolation: disabled on command line.
Using GB pages for direct mapping
RAMDISK: [mem 0x35fd7000-0x36fe2fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000DCEFE170 0000DC (v01 LENOVO TP-GR 00001170 PTEC 00000002)
ACPI: FACP 0x00000000DCEF9000 00010C (v05 LENOVO TP-GR 00001170 PTEC 00000002)
ACPI: DSDT 0x00000000DCEE0000 01336D (v01 LENOVO TP-GR 00001170 INTL 20120711)
ACPI: FACS 0x00000000DCE4A000 000040
ACPI: DBGP 0x00000000DCEFC000 000034 (v01 LENOVO TP-GR 00001170 PTEC 00000002)
ACPI: ECDT 0x00000000DCEFB000 000052 (v01 LENOVO TP-GR 00001170 PTEC 00000002)
ACPI: HPET 0x00000000DCEF8000 000038 (v01 LENOVO TP-GR 00001170 PTEC 00000002)
ACPI: APIC 0x00000000DCEF7000 000098 (v01 LENOVO TP-GR 00001170 PTEC 00000002)
ACPI: MCFG 0x00000000DCEF6000 00003C (v01 LENOVO TP-GR 00001170 PTEC 00000002)
ACPI: SSDT 0x00000000DCEF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
ACPI: SSDT 0x00000000DCEF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
ACPI: SSDT 0x00000000DCEDF000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711)
ACPI: SSDT 0x00000000DCEDE000 0007F5 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 0x00000000DCEDD000 000AD8 (v01 LENOVO CpuPm 00003000 INTL 20120711)
ACPI: SSDT 0x00000000DCEDB000 00125C (v01 LENOVO SaSsdt 00003000 INTL 20120711)
ACPI: SSDT 0x00000000DCEDA000 000379 (v01 LENOVO CppcTabl 00001000 INTL 20120711)
ACPI: PCCT 0x00000000DCED9000 00006E (v05 LENOVO TP-GR 00001170 PTEC 00000002)
ACPI: SSDT 0x00000000DCED8000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711)
ACPI: TCPA 0x00000000DCED7000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: UEFI 0x00000000DCED6000 000042 (v01 LENOVO TP-GR 00001170 PTEC 00000002)
ACPI: MSDM 0x00000000DCDB2000 000055 (v03 LENOVO TP-GR 00001170 PTEC 00000002)
ACPI: ASF! 0x00000000DCEFD000 0000A5 (v32 LENOVO TP-GR 00001170 PTEC 00000002)
ACPI: BATB 0x00000000DCED5000 000046 (v01 LENOVO TP-GR 00001170 PTEC 00000002)
ACPI: FPDT 0x00000000DCED4000 000064 (v01 LENOVO TP-GR 00001170 PTEC 00000002)
ACPI: UEFI 0x00000000DCED3000 0002E2 (v01 LENOVO TP-GR 00001170 PTEC 00000002)
ACPI: DMAR 0x00000000DCED2000 0000B0 (v01 LENOVO TP-GR 00001170 PTEC 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021e5fffff]
NODE_DATA(0) allocated [mem 0x21e5e8000-0x21e5fdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021e5fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000cd560fff]
node 0: [mem 0x0000000100000000-0x000000021e5fffff]
Zeroed struct page in unavailable ranges: 17667 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000021e5fffff]
On node 0 totalpages: 2013949
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13078 pages used for memmap
DMA32 zone: 836961 pages, LIFO batch:63
Normal zone: 18328 pages used for memmap
Normal zone: 1172992 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0xdda00000-0xdf9fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0xcd561000-0xdcd3efff]
PM: hibernation: Registered nosave memory: [mem 0xdcd3f000-0xdce7efff]
PM: hibernation: Registered nosave memory: [mem 0xdce7f000-0xdcefefff]
PM: hibernation: Registered nosave memory: [mem 0xdceff000-0xdfa0ffff]
PM: hibernation: Registered nosave memory: [mem 0xdfa10000-0xf7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
PM: hibernation: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
PM: hibernation: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
PM: hibernation: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: hibernation: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: hibernation: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[mem 0xdfa10000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 59 pages/cpu s204800 r8192 d28672 u262144
pcpu-alloc: s204800 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 1982458
Policy zone: Normal
printk: log_buf_len individual max cpu contribution: 32768 bytes
printk: log_buf_len total cpu_extra contributions: 229376 bytes
printk: log_buf_len min size: 262144 bytes
printk: log_buf_len: 524288 bytes
printk: early log buf free: 249992(95%)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 3369788K/8055796K available (12291K kernel code, 1610K rwdata, 7548K rodata, 2072K init, 12412K bss, 267324K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x26/0x230 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 42574 entries in 167 pages
ftrace: allocated 167 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 33024, nr_irqs: 760, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200326
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
DMAR: RMRR base: 0x000000daec1000 end: 0x000000daed7fff
DMAR: RMRR base: 0x000000dd800000 end: 0x000000df9fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d4d011347, max_idle_ns: 440795280936 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.84 BogoMIPS (lpj=10775684)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Speculative Store Bypass: Vulnerable
SRBDS: Vulnerable
Freeing SMP alternatives memory: 36K
smpboot: CPU0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (family: 0x6, model: 0x45, stepping: 0x1)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 4 processors activated (21551.36 BogoMIPS)
node 0 initialised, 1104671 pages in 28ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdcd3f000-0xdce7efff] (1310720 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 20:12:39, date: 2020-07-23
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1595535159.056:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 9 ACPI AML tables successfully acquired and loaded
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: Boot ECDT EC used to handle transactions
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI Error: Needed type [Reference], found [Integer] 0000000044eeb7f2 (20200326/exresop-66)
ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20200326/dswexec-431)
ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20200326/psparse-529)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF93EA9546C000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF93EA954E5600 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR DPC]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
pci_bus 0000:00: root bus resource [bus 00-3f]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf0530000-0xf0533fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf0520000-0xf052ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf0539000-0xf053901f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:9c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0x30b0-0x30b7]
pci 0000:00:16.3: reg 0x14: [mem 0xf053f000-0xf053ffff]
pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf0500000-0xf051ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf053e000-0xf053efff]
pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf0534000-0xf0537fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf053d000-0xf053d3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf053c000-0xf053c7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf0538000-0xf05380ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff]
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x25
ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete
ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events
iommu: Default domain type: Passthrough
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xcd561000-0xcfffffff]
e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
system 00:01: [io 0x1800-0x189f] has been reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0880-0x08ff] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0980-0x09ff] has been reserved
system 00:01: [io 0x0a00-0x0a7f] has been reserved
system 00:01: [io 0x0a80-0x0aff] has been reserved
system 00:01: [io 0x0b00-0x0b7f] has been reserved
system 00:01: [io 0x0b80-0x0bff] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x167f] has been reserved
system 00:01: [io 0x1640-0x165f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN0034 PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfd00000-0xdfefffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfcfffff]
pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfefffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfcfffff]
pci_bus 0000:02: resource 2 [mem 0xdfd00000-0xdfefffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16432K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xc9561000-0xcd561000] (64MB)
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=37 max_order=21 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0x00000000cce7be64, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.5.1 model 0x45
intel_idle: Local APIC timer is reliable in all C-states
0000:00:16.3: ttyS4 at I/O 0x30b0 (irq = 17, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
ata1: SATA max UDMA/133 abar m2048@0xf053c000 port 0xf053c100 irq 44
ata2: DUMMY
ata3: DUMMY
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2020-07-23T20:12:41 UTC (1595535161)
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ledtrig-cpu: registered to indicate activity on CPUs
hid: raw HID events driver (C) Jiri Kosina
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
RPL Segment Routing with IPv6
RAS: Correctable Errors collector initialized.
microcode: sig=0x40651, pf=0x40, revision=0x26
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (2172359018, 584529)->(2177871877, -4928330)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'openSUSE Secure Boot Signkey: 0332fa9cbf0d88bf21924b0de82a09a54d5defc8'
zswap: loaded using pool lzo/zbud
page_owner is disabled
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: Allocated hash algorithm: sha256
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ATA-9: TOSHIBA THNSNJ128GDNU, JULA0102, max UDMA/100
ima: No architecture policies found
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
evm: Initialising EVM extended attributes:
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
evm: security.selinux
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 12:26:246
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
tsc: Refined TSC clocksource calibration: 2693.760 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d437ab68b, max_idle_ns: 440795285230 ns
clocksource: Switched to clocksource tsc
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA THNSNJ12 0102 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4684]
psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1170..]
psmouse serio1: synaptics: Trying to set up SMBus access
psmouse serio1: synaptics: SMbus companion is not ready yet
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x12e800/0x0, board id: 2962, fw id: 2560
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2072K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 644K
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.7.7-1-default
systemd[1]: systemd 245.6+suse.48.gb12cd8b89b running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
systemd[1]: Reached target Slices.
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
systemd[1]: Reached target Swap.
systemd[1]: Reached target Timers.
systemd[1]: Listening on Journal Socket (/dev/log).
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
alua: device handler registered
emc: device handler registered
rdac: device handler registered
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
sd 0:0:0:0: Attached scsi generic sg0 type 0
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Started Journal Service.
battery: ACPI: Battery Slot [BAT0] (battery present)
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf053d000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.7.7-1-default ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.7.7-1-default xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.7.7-1-default xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
raid6: avx2x4 gen() 17027 MB/s
usb 2-1: new high-speed USB device number 2 using xhci_hcd
usb 1-1: new high-speed USB device number 2 using ehci-pci
checking generic (e0000000 500000) vs hw (f0000000 400000)
raid6: avx2x4 xor() 12303 MB/s
checking generic (e0000000 500000) vs hw (e0000000 10000000)
raid6: avx2x2 gen() 31970 MB/s
fb0: switching to inteldrmfb from VESA VGA
usb 2-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1: Product: USB 2.0 Hub
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
raid6: avx2x2 xor() 14325 MB/s
hub 2-1:1.0: USB hub found
hub 1-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
hub 1-1:1.0: 8 ports detected
raid6: avx2x1 gen() 24700 MB/s
raid6: avx2x1 xor() 20163 MB/s
usb 2-2: new high-speed USB device number 3 using xhci_hcd
raid6: sse2x4 gen() 13348 MB/s
usb 2-2: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
raid6: sse2x4 xor() 7174 MB/s
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
raid6: sse2x2 gen() 14569 MB/s
usb 2-2: Product: Ultra
usb 1-1.5: new full-speed USB device number 3 using ehci-pci
usb 2-2: Manufacturer: SanDisk
usb 2-2: SerialNumber: 0101a1e0eb675e4f9ece0ef1ea271ca1df36c108c37cd7dd7873e04aa3398c77e55300000000000000000000201bfa6700882d00815581079da618c2
raid6: sse2x2 xor() 9700 MB/s
usb-storage 2-2:1.0: USB Mass Storage device detected
raid6: sse2x1 gen() 12743 MB/s
scsi host3: usb-storage 2-2:1.0
usb 2-1.1: new low-speed USB device number 4 using xhci_hcd
usbcore: registered new interface driver usb-storage
raid6: sse2x1 xor() 8945 MB/s
raid6: using algorithm avx2x2 gen() 31970 MB/s
usbcore: registered new interface driver uas
raid6: .... xor() 14325 MB/s, rmw enabled
usb 2-1.1: New USB device found, idVendor=0000, idProduct=0538, bcdDevice= 1.00
raid6: using avx2x2 recovery algorithm
usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.1: Product: USB OPTICAL MOUSE
usbcore: registered new interface driver usbhid
usb 1-1.5: New USB device found, idVendor=04f3, idProduct=012d, bcdDevice= 0.12
usbhid: USB HID core driver
usb 2-6: new full-speed USB device number 5 using xhci_hcd
usb 1-1.5: New USB device strings: Mfr=4, Product=14, SerialNumber=0
usb 1-1.5: Product: Touchscreen
usb 1-1.5: Manufacturer: ELAN
xor: automatically using best checksumming function avx
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:0000:0538.0001/input/input4
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:04F3:012D.0002/input/input5
hid-generic 0003:0000:0538.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-1.1/input0
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:04F3:012D.0002/input/input6
usb 2-6: New USB device found, idVendor=138a, idProduct=0017, bcdDevice= 0.78
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:04F3:012D.0002/input/input7
usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
hid-generic 0003:04F3:012D.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:1d.0-1.5/input0
usb 2-6: SerialNumber: 4b63ad1451e8
usb 2-1.2: new low-speed USB device number 6 using xhci_hcd
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
scsi 3:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 120176640 512-byte logical blocks: (61.5 GB/57.3 GiB)
Btrfs loaded, crc32c=crc32c-intel, assert=on
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
BTRFS: device fsid 092c3edd-14e0-44e8-ab18-55f33af72bce devid 1 transid 380840 /dev/sda2 scanned by systemd-udevd (273)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
PM: Image not found (code -22)
sdb: sdb1
i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] Panel advertises DPCD backlight support, but VBT disagrees. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=1. If your machine needs this, please file a _new_ bug report on drm/i915, see for details.
sd 3:0:0:0: [sdb] Attached SCSI removable disk
BTRFS info (device sda2): disk space caching is enabled
BTRFS info (device sda2): has skinny extents
usb 1-1.8: new high-speed USB device number 4 using ehci-pci
[drm] Initialized i915 1.6.0 20200313 for 0000:00:02.0 on minor 0
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
BTRFS info (device sda2): enabling ssd optimizations
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:04F3:012D.0002/input/input10
input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:04F3:012D.0002/input/input11
input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:04F3:012D.0002/input/input12
hid-multitouch 0003:04F3:012D.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:1d.0-1.5/input0
usb 2-1.2: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.02
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: USB Keyboard
usb 2-1.2: Manufacturer: Logitech
fbcon: i915drmfb (fb0) is primary device
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C31C.0003/input/input14
usb 1-1.8: New USB device found, idVendor=04f2, idProduct=b3f5, bcdDevice=25.09
usb 1-1.8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1.8: Product: Integrated Camera
usb 1-1.8: Manufacturer: Chicony Electronics Co.,Ltd.
usb 1-1.8: SerialNumber: 0x0001
hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-1.2/input0
input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C31C.0004/input/input15
usb 2-7: new full-speed USB device number 7 using xhci_hcd
input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C31C.0004/input/input16
hid-generic 0003:046D:C31C.0004: input,hiddev97,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-1.2/input1
usb 2-7: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
systemd-journald[175]: Received SIGTERM from PID 1 (systemd).
systemd[1]: systemd 245.6+suse.48.gb12cd8b89b running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /usr/lib/systemd/system/display-manager.service:12: PIDFile= references a path below legacy directory /var/run/, updating /var/run/displaymanager.pid → /run/displaymanager.pid; please update the unit file accordingly.
systemd[1]: initrd-switch-root.service: Succeeded.
systemd[1]: Stopped Switch Root.
systemd[1]: haveged.service: Scheduled restart job, restart counter is at 1.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice Virtual Machine and Container Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Stopped target Switch Root.
systemd[1]: Stopped target Initrd File Systems.
systemd[1]: Stopped target Initrd Root File System.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: plymouth-start.service: Succeeded.
systemd[1]: Stopped Show Plymouth Boot Screen.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-fsck-root.service: Succeeded.
systemd[1]: Stopped File System Check on Root Device.
Adding 2097472k swap on /dev/sda3. Priority:-2 extents:1 across:2097472k SSFS
systemd[1]: Stopped Journal Service.
systemd[1]: Stopped Entropy Daemon based on the HAVEGE algorithm.
systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: sysroot.mount: Succeeded.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
BTRFS info (device sda2): disk space caching is enabled
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Reached target Swap.
systemd[1]: Condition check resulted in FUSE Control File System being skipped.
systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
systemd[1]: Condition check resulted in First Boot Wizard being skipped.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Condition check resulted in Create System Users being skipped.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Started Journal Service.
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input17
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input18
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input19
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (57 C)
ACPI: AC Adapter [AC] (on-line)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
thinkpad_acpi: ThinkPad ACPI Extras v0.26
thinkpad_acpi:
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
thinkpad_acpi: ThinkPad BIOS GRET40WW (1.17 ), EC GRHT34WW
thinkpad_acpi: Lenovo ThinkPad X1 Carbon 2nd, model 20A7CTO1WW
i801_smbus 0000:00:1f.3: SPD Write Disable is set
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: battery 1 registered (start 0, stop 100)
battery: new extension: ThinkPad Battery Extension
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input20
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
input: PC Speaker as /devices/platform/pcspkr/input/input21
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
cryptd: max_cpu_qlen set to 1000
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:ee:75:3d:f8:cc
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
iwlwifi 0000:03:00.0: loaded firmware version 17.3216344376.0 7260-17.ucode op_mode iwlmvm
iwlwifi 0000:03:00.0: Direct firmware load for iwl-debug-yoyo.bin failed with error -2
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input25
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input26
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19
e1000e 0000:00:19.0 enp0s25: renamed from eth0
snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input27
input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input28
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input29
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input30
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input31
input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input32
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input33
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
iwlwifi 0000:03:00.0: base HW address: 5c:c5:d4:05:13:6a
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4684]
psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1170..]
psmouse serio1: synaptics: Trying to set up SMBus access
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
rmi4_smbus 10-002c: registering SMbus-connected sensor
rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: tm2962-001, fw id: 1637232
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
input: Synaptics tm2962-001 as /devices/rmi4-00/input/input34
serio: RMI4 PS/2 pass-through port at rmi4-00.fn03
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
Bluetooth: hci0: unexpected event for opcode 0xfc2f
Bluetooth: hci0: Intel BT fw patch 0x57 completed & activated
psmouse serio3: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
usb 2-7: USB disconnect, device number 7
systemd-journald[427]: Received client request to flush runtime journal.
input: TPPS/2 IBM TrackPoint as /devices/rmi4-00/rmi4-00.fn03/serio3/input/input35
audit: type=1400 audit(1595535173.188:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=973 comm="apparmor_parser"
audit: type=1400 audit(1595535173.480:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ghostscript" pid=989 comm="apparmor_parser"
audit: type=1400 audit(1595535173.480:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ghostscript///usr/bin/hpijs" pid=989 comm="apparmor_parser"
audit: type=1400 audit(1595535173.504:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1038 comm="apparmor_parser"
audit: type=1400 audit(1595535173.516:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1045 comm="apparmor_parser"
audit: type=1400 audit(1595535173.516:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1045 comm="apparmor_parser"
audit: type=1400 audit(1595535173.532:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=1052 comm="apparmor_parser"
audit: type=1400 audit(1595535173.544:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslogd" pid=1059 comm="apparmor_parser"
audit: type=1400 audit(1595535173.556:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslog-ng" pid=1067 comm="apparmor_parser"
uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b3f5)
uvcvideo 1-1.8:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-1.8:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-1.8:1.0: Entity type for entity Camera 1 was not initialized!
input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8:1.0/input/input36
usbcore: registered new interface driver uvcvideo
audit: type=1400 audit(1595535173.576:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lessopen.sh" pid=1078 comm="apparmor_parser"
USB Video Class driver (1.1.1)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
bpfilter: Loaded bpfilter_umh pid 1524
Started bpfilter
e1000e 0000:00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
NET: Registered protocol family 17
fuse: init (API version 7.31)