dmesg - teste1
microcode: microcode updated early to revision 0x2f, date = 2019-02-17
Linux version 5.4.0-40-generic (buildd@lcy01-amd64-011) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #44-Ubuntu SMP Tue Jun 23 00:01:04 UTC 2020 (Ubuntu 5.4.0-40.44-generic 5.4.44)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000da15cfff] usable
BIOS-e820: [mem 0x00000000da15d000-0x00000000dabb1fff] reserved
BIOS-e820: [mem 0x00000000dabb2000-0x00000000dabc2fff] ACPI data
BIOS-e820: [mem 0x00000000dabc3000-0x00000000dba4cfff] ACPI NVS
BIOS-e820: [mem 0x00000000dba4d000-0x00000000dc582fff] reserved
BIOS-e820: [mem 0x00000000dc583000-0x00000000dc583fff] usable
BIOS-e820: [mem 0x00000000dc584000-0x00000000dc5c6fff] ACPI NVS
BIOS-e820: [mem 0x00000000dc5c7000-0x00000000dc9d7fff] usable
BIOS-e820: [mem 0x00000000dc9d8000-0x00000000dcff3fff] reserved
BIOS-e820: [mem 0x00000000dcff4000-0x00000000dcffffff] usable
BIOS-e820: [mem 0x00000000dd800000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000019f5fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x959ee018-0x959fe057] usable ==> usable
e820: update [mem 0x959ee018-0x959fe057] usable ==> usable
e820: update [mem 0x959e2018-0x959ed857] usable ==> usable
e820: update [mem 0x959e2018-0x959ed857] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
reserve setup_data: [mem 0x0000000020200000-0x000000003fffffff] usable
reserve setup_data: [mem 0x0000000040000000-0x00000000401fffff] reserved
reserve setup_data: [mem 0x0000000040200000-0x00000000959e2017] usable
reserve setup_data: [mem 0x00000000959e2018-0x00000000959ed857] usable
reserve setup_data: [mem 0x00000000959ed858-0x00000000959ee017] usable
reserve setup_data: [mem 0x00000000959ee018-0x00000000959fe057] usable
reserve setup_data: [mem 0x00000000959fe058-0x00000000da15cfff] usable
reserve setup_data: [mem 0x00000000da15d000-0x00000000dabb1fff] reserved
reserve setup_data: [mem 0x00000000dabb2000-0x00000000dabc2fff] ACPI data
reserve setup_data: [mem 0x00000000dabc3000-0x00000000dba4cfff] ACPI NVS
reserve setup_data: [mem 0x00000000dba4d000-0x00000000dc582fff] reserved
reserve setup_data: [mem 0x00000000dc583000-0x00000000dc583fff] usable
reserve setup_data: [mem 0x00000000dc584000-0x00000000dc5c6fff] ACPI NVS
reserve setup_data: [mem 0x00000000dc5c7000-0x00000000dc9d7fff] usable
reserve setup_data: [mem 0x00000000dc9d8000-0x00000000dcff3fff] reserved
reserve setup_data: [mem 0x00000000dcff4000-0x00000000dcffffff] usable
reserve setup_data: [mem 0x00000000dd800000-0x00000000df9fffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000019f5fffff] usable
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xdabb5000 ACPI 2.0=0xdabb5000 SMBIOS=0xf04c0 MPS=0xfd720
secureboot: Secure boot disabled
SMBIOS 2.7 present.
DMI: Dell Inc. Inspiron 3421/0Y02PG, BIOS A13 12/14/2015
tsc: Fast TSC calibration using PIT
tsc: Detected 1496.608 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x19f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DFFFF uncachable
E0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 100000000 mask F80000000 write-back
2 base 180000000 mask FE0000000 write-back
3 base 0E0000000 mask FE0000000 uncachable
4 base 0DE000000 mask FFE000000 uncachable
5 base 0DD800000 mask FFF800000 uncachable
6 base 19F800000 mask FFF800000 uncachable
7 base 19F600000 mask FFFE00000 uncachable
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 6094M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 9 lose cover RAM: 0G
e820: update [mem 0xdd800000-0xffffffff] usable ==> reserved
last_pfn = 0xdd000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fda10-0x000fda1f]
check: Scanning 1 areas for low memory corruption
reserving inaccessible SNB gfx pages
BRK [0x61401000, 0x61401fff] PGTABLE
BRK [0x61402000, 0x61402fff] PGTABLE
BRK [0x61403000, 0x61403fff] PGTABLE
BRK [0x61404000, 0x61404fff] PGTABLE
BRK [0x61405000, 0x61405fff] PGTABLE
BRK [0x61406000, 0x61406fff] PGTABLE
BRK [0x61407000, 0x61407fff] PGTABLE
BRK [0x61408000, 0x61408fff] PGTABLE
BRK [0x61409000, 0x61409fff] PGTABLE
BRK [0x6140a000, 0x6140afff] PGTABLE
secureboot: Secure boot disabled
RAMDISK: [mem 0x38331000-0x3d490fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DABB5000 000024 (v02 DELL )
ACPI: XSDT 0x00000000DABB5080 000084 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: FACP 0x00000000DABBF650 00010C (v05 DELL WN09 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DABB5198 00A4B4 (v02 DELL WN09 00000022 INTL 20051117)
ACPI: FACS 0x00000000DBA48080 000040
ACPI: APIC 0x00000000DABBF760 000072 (v03 DELL WN09 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DABBF7D8 000044 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DABBF820 00003C (v01 DELL WN09 01072009 MSFT 00000097)
ACPI: SSDT 0x00000000DABBF860 001068 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
ACPI: SLIC 0x00000000DABC08C8 000176 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: HPET 0x00000000DABC0A40 000038 (v01 DELL WN09 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DABC0A78 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: MSDM 0x00000000DABC0D90 000055 (v03 DELL WN09 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DABC0DE8 00079A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DABC1588 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: BGRT 0x00000000DABC2020 000038 (v00 DELL WN09 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000019f5fffff]
NODE_DATA(0) allocated [mem 0x19f5d1000-0x19f5fbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000019f5fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x000000003fffffff]
node 0: [mem 0x0000000040200000-0x00000000da15cfff]
node 0: [mem 0x00000000dc583000-0x00000000dc583fff]
node 0: [mem 0x00000000dc5c7000-0x00000000dc9d7fff]
node 0: [mem 0x00000000dcff4000-0x00000000dcffffff]
node 0: [mem 0x0000000100000000-0x000000019f5fffff]
Zeroed struct page in unavailable ranges: 26855 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000019f5fffff]
On node 0 totalpages: 1546009
DMA zone: 64 pages used for memmap
DMA zone: 158 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13894 pages used for memmap
DMA32 zone: 889211 pages, LIFO batch:63
Normal zone: 10200 pages used for memmap
Normal zone: 652800 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0xdda00000-0xdf9fffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
e820: update [mem 0xce412000-0xce561fff] usable ==> reserved
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0x959e2000-0x959e2fff]
PM: Registered nosave memory: [mem 0x959ed000-0x959edfff]
PM: Registered nosave memory: [mem 0x959ee000-0x959eefff]
PM: Registered nosave memory: [mem 0x959fe000-0x959fefff]
PM: Registered nosave memory: [mem 0xce412000-0xce561fff]
PM: Registered nosave memory: [mem 0xda15d000-0xdabb1fff]
PM: Registered nosave memory: [mem 0xdabb2000-0xdabc2fff]
PM: Registered nosave memory: [mem 0xdabc3000-0xdba4cfff]
PM: Registered nosave memory: [mem 0xdba4d000-0xdc582fff]
PM: Registered nosave memory: [mem 0xdc584000-0xdc5c6fff]
PM: Registered nosave memory: [mem 0xdc9d8000-0xdcff3fff]
PM: Registered nosave memory: [mem 0xdd000000-0xdd7fffff]
PM: Registered nosave memory: [mem 0xdd800000-0xdf9fffff]
PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xdfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 1521693
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 5696436K/6184036K available (14339K kernel code, 2397K rwdata, 4952K rodata, 2712K init, 4992K bss, 487600K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 44488 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x15929e5321f, max_idle_ns: 440795258645 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.21 BogoMIPS (lpj=5986432)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i3-2375M CPU @ 1.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2
MDS CPU bug present and SMT on, data leak possible. See for more details.
#3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (11972.86 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdabc3000-0xdba4cfff] (15245312 bytes)
PM: Registering ACPI NVS region [mem 0xdc584000-0xdc5c6fff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 06:55:26, date: 2020-07-17
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1594968926.048:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 5 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF906458066000 00080E (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF90645745B000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF906457A0B400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 14 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7d1a000-0xf7d1a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7d18000-0xf7d183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7d17000-0xf7d173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7d16000-0xf7d167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7d15000-0xf7d150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:06:00.0: [168c:0032] type 00 class 0x028000
pci 0000:06:00.0: reg 0x10: [mem 0xf7c00000-0xf7c7ffff 64bit]
pci 0000:06:00.0: reg 0x30: [mem 0xf7c80000-0xf7c8ffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:09:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:09:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:09:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:09:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 09]
pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x959e2018-0x97ffffff]
e820: reserve RAM buffer [mem 0x959ee018-0x97ffffff]
e820: reserve RAM buffer [mem 0xce412000-0xcfffffff]
e820: reserve RAM buffer [mem 0xda15d000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdc584000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdc9d8000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x19f600000-0x19fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x1000-0x100f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x0453] has been reserved
system 00:00: [io 0x0458-0x047f] has been reserved
system 00:00: [io 0x0500-0x057f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0454-0x0457] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [mem 0xfe800000-0xfe802fff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs DLL0591 SYN0600 SYN0002 PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xdfa00000-0xdfa00fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x20000000-0x201fffff] has been reserved
system 00:07: [mem 0x40000000-0x401fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.5: PCI bridge to [bus 09]
pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xdfa00000-0xfeafffff window]
pci_bus 0000:06: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:09: resource 0 [io 0xe000-0xefff]
pci_bus 0000:09: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 22002 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 23404 usecs
pci 0000:06:00.0: CLS mismatch (64 != 32), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 83328K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xc9a7a000-0xcda7a000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: Ignoring BGRT: unexpected or invalid BMP data
efifb: framebuffer at 0xe0000000, using 4128k, total 4128k
efifb: mode is 1366x768x32, linelength=5504, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (52 C)
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d18000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-40-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d17000
battery: ACPI: Battery Slot [BAT0] (battery present)
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-40-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-40-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-40-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x206a7, pf=0x10, revision=0x2f
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (825606444, 305531)->(840687940, -14775965)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: c7397aba4b613cce0e4070f289f6e01155c15620'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 12:807:923
rtc_cmos 00:01: setting system clock to 2020-07-17T06:55:27 UTC (1594968927)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2712K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1192K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
usb 1-1: new high-speed USB device number 2 using ehci-pci
wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
ahci 0000:00:1f.2: version 3.0
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
usb 3-1: new low-speed USB device number 2 using xhci_hcd
usb 2-1: new high-speed USB device number 2 using ehci-pci
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
cryptd: max_cpu_qlen set to 1000
libphy: r8169: probed
r8169 0000:09:00.0 eth0: RTL8105e, 74:86:7a:fa:62:4b, XID 40c, IRQ 29
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16100 irq 28
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16300 irq 28
ata6: DUMMY
r8169 0000:09:00.0 enp9s0: renamed from eth0
usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 3-1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Keyboard
usb 3-1: Manufacturer: Logitech
checking generic (e0000000 408000) vs hw (e0000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
fbcon: i915drmfb (fb0) is primary device
fbcon: Deferring console take-over
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
usb 3-3: new full-speed USB device number 3 using xhci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4754]
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ATAPI: PLDS DVD+/-RW DU-8A5HH, SD11, max UDMA/100
ata5.00: configured for UDMA/100
ata1.00: ATA-8: WDC WD5000BPVT-22HXZT3, 01.01A01, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/133
random: fast init done
scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPVT-2 1A01 PQ: 0 ANSI: 5
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
sd 0:0:0:0: Attached scsi generic sg0 type 0
random: systemd-udevd: uninitialized urandom read (16 bytes read)
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DU-8A5HH SD11 PQ: 0 ANSI: 5
psmouse serio1: synaptics: queried min coordinates: x [1268..], y [1098..]
psmouse serio1: synaptics: Your touchpad (PNP: DLL0591 SYN0600 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
usb 1-1.3: new high-speed USB device number 3 using ehci-pci
sda: sda1 sda2 sda3 sda4 sda5
sd 0:0:0:0: [sda] Attached SCSI disk
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00/0x0, board id: 2382, fw id: 1238635
usb 3-3: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:046D:C31C.0001/input/input8
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-1/input0
input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0002/input/input9
usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: USB2.0-CRW
usb 1-1.3: Manufacturer: Generic
usb 1-1.3: SerialNumber: 20100201396000000
usbcore: registered new interface driver rtsx_usb
input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0002/input/input10
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-1/input1
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C534.0003/input/input11
tsc: Refined TSC clocksource calibration: 1496.600 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159296d3708, max_idle_ns: 440795218047 ns
clocksource: Switched to clocksource tsc
usb 1-1.4: new full-speed USB device number 4 using ehci-pci
hid-generic 0003:046D:C534.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0004/input/input12
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0004/input/input13
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0004/input/input14
hid-generic 0003:046D:C534.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=e004, bcdDevice= 0.02
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Bluetooth USB Host Controller
usb 1-1.4: Manufacturer: Atheros Communications
usb 1-1.4: SerialNumber: Alaska Day 2006
logitech-djreceiver 0003:046D:C534.0003: hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
usb 1-1.6: new high-speed USB device number 5 using ehci-pci
usb 1-1.6: New USB device found, idVendor=0c45, idProduct=64ad, bcdDevice=33.11
usb 1-1.6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-1.6: Product: Laptop_Integrated_Webcam_HD
usb 1-1.6: Manufacturer: CN0Y3PX87248737FALZJA01
logitech-djreceiver 0003:046D:C534.0004: hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
logitech-djreceiver 0003:046D:C534.0004: device of type eQUAD nano Lite (0x0a) connected on slot 2
input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0004/0003:046D:4054.0005/input/input17
hid-generic 0003:046D:4054.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:14.0-3/input1:2
input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0004/0003:046D:4054.0005/input/input21
logitech-hidpp-device 0003:046D:4054.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-3/input1:2
raid6: sse2x4 gen() 5910 MB/s
raid6: sse2x4 xor() 4129 MB/s
raid6: sse2x2 gen() 4977 MB/s
raid6: sse2x2 xor() 3457 MB/s
raid6: sse2x1 gen() 4404 MB/s
raid6: sse2x1 xor() 2962 MB/s
raid6: using algorithm sse2x4 gen() 5910 MB/s
raid6: .... xor() 4129 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
fbcon: Taking over console
Console: switching to colour frame buffer device 170x48
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Finished Uncomplicated firewall.
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Started Journal Service.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd-journald[378]: Received client request to flush runtime journal.
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input22
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
ath9k 0000:06:00.0: enabling device (0100 -> 0102)
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffad7280780000, irq=18
ath9k 0000:06:00.0 wlp6s0: renamed from wlan0
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: RAPL package-0 domain package locked by BIOS
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3221: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
audit: type=1400 audit(1594968948.502:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=848 comm="apparmor_parser"
audit: type=1400 audit(1594968948.502:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=847 comm="apparmor_parser"
audit: type=1400 audit(1594968948.650:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=881 comm="apparmor_parser"
audit: type=1400 audit(1594968948.650:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=881 comm="apparmor_parser"
audit: type=1400 audit(1594968948.670:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=846 comm="apparmor_parser"
audit: type=1400 audit(1594968948.670:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=846 comm="apparmor_parser"
audit: type=1400 audit(1594968948.670:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=846 comm="apparmor_parser"
audit: type=1400 audit(1594968948.670:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=846 comm="apparmor_parser"
usbcore: registered new interface driver btusb
audit: type=1400 audit(1594968948.738:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=849 comm="apparmor_parser"
audit: type=1400 audit(1594968948.738:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=849 comm="apparmor_parser"
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
usbcore: registered new interface driver ath3k
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64ad)
uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
input: Laptop_Integrated_Webcam_HD: In as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input26
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
NET: Registered protocol family 38
kauditd_printk_skb: 16 callbacks suppressed
audit: type=1400 audit(1594968957.782:28): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1060 comm="cups-browsed" capability=23 capname="sys_nice"
RTL8208 Fast Ethernet r8169-900:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-900:00, irq=IGNORE)
r8169 0000:09:00.0 enp9s0: Link is Down
wlp6s0: authenticate with a0:f3:c1:a7:64:42
wlp6s0: send auth to a0:f3:c1:a7:64:42 (try 1/3)
wlp6s0: authenticated
wlp6s0: associate with a0:f3:c1:a7:64:42 (try 1/3)
wlp6s0: RX AssocResp from a0:f3:c1:a7:64:42 (capab=0x431 status=0 aid=8)
wlp6s0: associated
ath: EEPROM regdomain: 0x804c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3b
ath: Country alpha2 being used: BR
ath: Regpair used: 0x3b
ath: regdomain 0x804c dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
logitech-hidpp-device 0003:046D:4054.0005: HID++ 4.5 device connected.
sr 4:0:0:0: [sr0] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 4:0:0:0: [sr0] tag#5 Sense Key : Not Ready [current]
sr 4:0:0:0: [sr0] tag#5 Add. Sense: Medium not present - tray closed
sr 4:0:0:0: [sr0] tag#5 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
sr 4:0:0:0: [sr0] tag#6 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 0, async page read
sr 4:0:0:0: [sr0] tag#7 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 1, async page read
sr 4:0:0:0: [sr0] tag#8 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 2, async page read
sr 4:0:0:0: [sr0] tag#9 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 3, async page read
sr 4:0:0:0: [sr0] tag#10 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 4, async page read
sr 4:0:0:0: [sr0] tag#11 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 5, async page read
sr 4:0:0:0: [sr0] tag#12 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 6, async page read
sr 4:0:0:0: [sr0] tag#13 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 7, async page read
sr 4:0:0:0: [sr0] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 4:0:0:0: [sr0] tag#8 Sense Key : Not Ready [current]
sr 4:0:0:0: [sr0] tag#8 Add. Sense: Medium not present - tray closed
sr 4:0:0:0: [sr0] tag#8 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
sr 4:0:0:0: [sr0] tag#9 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 0, async page read
sr 4:0:0:0: [sr0] tag#10 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 1, async page read
sr 4:0:0:0: [sr0] tag#11 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 2, async page read
sr 4:0:0:0: [sr0] tag#12 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 3, async page read
sr 4:0:0:0: [sr0] tag#13 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 4, async page read
sr 4:0:0:0: [sr0] tag#14 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 5, async page read
sr 4:0:0:0: [sr0] tag#15 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 6, async page read
sr 4:0:0:0: [sr0] tag#16 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 7, async page read
sr 4:0:0:0: [sr0] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 4:0:0:0: [sr0] tag#6 Sense Key : Not Ready [current]
sr 4:0:0:0: [sr0] tag#6 Add. Sense: Medium not present - tray closed
sr 4:0:0:0: [sr0] tag#6 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
sr 4:0:0:0: [sr0] tag#7 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 0, async page read
sr 4:0:0:0: [sr0] tag#10 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 1, async page read
sr 4:0:0:0: [sr0] tag#11 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 2, async page read
sr 4:0:0:0: [sr0] tag#12 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 3, async page read
sr 4:0:0:0: [sr0] tag#13 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 4, async page read
sr 4:0:0:0: [sr0] tag#14 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 5, async page read
sr 4:0:0:0: [sr0] tag#15 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 6, async page read
sr 4:0:0:0: [sr0] tag#16 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 7, async page read
sr 4:0:0:0: [sr0] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 4:0:0:0: [sr0] tag#28 Sense Key : Not Ready [current]
sr 4:0:0:0: [sr0] tag#28 Add. Sense: Medium not present - tray closed
sr 4:0:0:0: [sr0] tag#28 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
sr 4:0:0:0: [sr0] tag#29 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 0, async page read
sr 4:0:0:0: [sr0] tag#30 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 1, async page read
sr 4:0:0:0: [sr0] tag#0 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 2, async page read
sr 4:0:0:0: [sr0] tag#1 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 3, async page read
sr 4:0:0:0: [sr0] tag#2 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 4, async page read
sr 4:0:0:0: [sr0] tag#3 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 5, async page read
sr 4:0:0:0: [sr0] tag#4 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 6, async page read
sr 4:0:0:0: [sr0] tag#5 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 7, async page read
sr 4:0:0:0: [sr0] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 4:0:0:0: [sr0] tag#2 Sense Key : Not Ready [current]
sr 4:0:0:0: [sr0] tag#2 Add. Sense: Medium not present - tray closed
sr 4:0:0:0: [sr0] tag#2 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
sr 4:0:0:0: [sr0] tag#3 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 0, async page read
sr 4:0:0:0: [sr0] tag#4 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 1, async page read
sr 4:0:0:0: [sr0] tag#5 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 2, async page read
sr 4:0:0:0: [sr0] tag#6 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 3, async page read
sr 4:0:0:0: [sr0] tag#7 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 4, async page read
sr 4:0:0:0: [sr0] tag#13 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 5, async page read
sr 4:0:0:0: [sr0] tag#14 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 6, async page read
sr 4:0:0:0: [sr0] tag#15 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 7, async page read
sr 4:0:0:0: [sr0] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 4:0:0:0: [sr0] tag#20 Sense Key : Not Ready [current]
sr 4:0:0:0: [sr0] tag#20 Add. Sense: Medium not present - tray closed
sr 4:0:0:0: [sr0] tag#20 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
sr 4:0:0:0: [sr0] tag#21 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 0, async page read
sr 4:0:0:0: [sr0] tag#22 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 1, async page read
sr 4:0:0:0: [sr0] tag#23 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 2, async page read
sr 4:0:0:0: [sr0] tag#31 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 3, async page read
sr 4:0:0:0: [sr0] tag#0 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 4, async page read
sr 4:0:0:0: [sr0] tag#1 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 5, async page read
sr 4:0:0:0: [sr0] tag#3 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 6, async page read
sr 4:0:0:0: [sr0] tag#4 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 7, async page read
sr 4:0:0:0: [sr0] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 4:0:0:0: [sr0] tag#15 Sense Key : Not Ready [current]
sr 4:0:0:0: [sr0] tag#15 Add. Sense: Medium not present - tray closed
sr 4:0:0:0: [sr0] tag#15 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
sr 4:0:0:0: [sr0] tag#16 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 0, async page read
sr 4:0:0:0: [sr0] tag#17 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 1, async page read
sr 4:0:0:0: [sr0] tag#18 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 2, async page read
sr 4:0:0:0: [sr0] tag#19 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 3, async page read
sr 4:0:0:0: [sr0] tag#20 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 4, async page read
sr 4:0:0:0: [sr0] tag#21 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 5, async page read
sr 4:0:0:0: [sr0] tag#22 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 6, async page read
sr 4:0:0:0: [sr0] tag#23 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 7, async page read
sr 4:0:0:0: [sr0] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 4:0:0:0: [sr0] tag#16 Sense Key : Not Ready [current]
sr 4:0:0:0: [sr0] tag#16 Add. Sense: Medium not present - tray closed
sr 4:0:0:0: [sr0] tag#16 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
sr 4:0:0:0: [sr0] tag#25 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 0, async page read
sr 4:0:0:0: [sr0] tag#26 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 1, async page read
sr 4:0:0:0: [sr0] tag#27 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 2, async page read
sr 4:0:0:0: [sr0] tag#28 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 3, async page read
sr 4:0:0:0: [sr0] tag#29 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 4, async page read
sr 4:0:0:0: [sr0] tag#30 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 5, async page read
sr 4:0:0:0: [sr0] tag#0 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 6, async page read
sr 4:0:0:0: [sr0] tag#1 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 7, async page read
sr 4:0:0:0: [sr0] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 4:0:0:0: [sr0] tag#24 Sense Key : Not Ready [current]
sr 4:0:0:0: [sr0] tag#24 Add. Sense: Medium not present - tray closed
sr 4:0:0:0: [sr0] tag#24 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
sr 4:0:0:0: [sr0] tag#25 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 0, async page read
sr 4:0:0:0: [sr0] tag#26 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 1, async page read
sr 4:0:0:0: [sr0] tag#27 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 2, async page read
sr 4:0:0:0: [sr0] tag#28 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 3, async page read
sr 4:0:0:0: [sr0] tag#29 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 4, async page read
sr 4:0:0:0: [sr0] tag#30 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 5, async page read
sr 4:0:0:0: [sr0] tag#0 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 6, async page read
sr 4:0:0:0: [sr0] tag#1 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 7, async page read
sr 4:0:0:0: [sr0] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 4:0:0:0: [sr0] tag#24 Sense Key : Not Ready [current]
sr 4:0:0:0: [sr0] tag#24 Add. Sense: Medium not present - tray closed
sr 4:0:0:0: [sr0] tag#24 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0
sr 4:0:0:0: [sr0] tag#25 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 0, async page read
sr 4:0:0:0: [sr0] tag#26 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 1, async page read
sr 4:0:0:0: [sr0] tag#27 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 2, async page read
sr 4:0:0:0: [sr0] tag#28 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 3, async page read
sr 4:0:0:0: [sr0] tag#29 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 4, async page read
sr 4:0:0:0: [sr0] tag#30 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 5, async page read
sr 4:0:0:0: [sr0] tag#5 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 6, async page read
sr 4:0:0:0: [sr0] tag#6 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 7, async page read
sr 4:0:0:0: [sr0] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 4:0:0:0: [sr0] tag#6 Sense Key : Not Ready [current]
sr 4:0:0:0: [sr0] tag#6 Add. Sense: Medium not present - tray closed
sr 4:0:0:0: [sr0] tag#6 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
sr 4:0:0:0: [sr0] tag#7 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 0, async page read
sr 4:0:0:0: [sr0] tag#8 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 1, async page read
sr 4:0:0:0: [sr0] tag#9 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 2, async page read
sr 4:0:0:0: [sr0] tag#10 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 3, async page read
sr 4:0:0:0: [sr0] tag#11 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 4, async page read
sr 4:0:0:0: [sr0] tag#12 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 5, async page read
sr 4:0:0:0: [sr0] tag#13 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 6, async page read
sr 4:0:0:0: [sr0] tag#14 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 7, async page read
sr 4:0:0:0: [sr0] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 4:0:0:0: [sr0] tag#2 Sense Key : Not Ready [current]
sr 4:0:0:0: [sr0] tag#2 Add. Sense: Medium not present - tray closed
sr 4:0:0:0: [sr0] tag#2 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
sr 4:0:0:0: [sr0] tag#3 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 0, async page read
sr 4:0:0:0: [sr0] tag#4 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 1, async page read
sr 4:0:0:0: [sr0] tag#5 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 2, async page read
sr 4:0:0:0: [sr0] tag#6 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 3, async page read
sr 4:0:0:0: [sr0] tag#7 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 4, async page read
sr 4:0:0:0: [sr0] tag#8 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 5, async page read
sr 4:0:0:0: [sr0] tag#9 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 6, async page read
sr 4:0:0:0: [sr0] tag#10 unaligned transfer
blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
Buffer I/O error on dev sr0, logical block 7, async page read