dmesg - benchmark
Linux version 4.19.0-9-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.118-2+deb10u1 (2020-06-07)
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000ca540fff] usable
BIOS-e820: [mem 0x00000000ca541000-0x00000000ca583fff] ACPI NVS
BIOS-e820: [mem 0x00000000ca584000-0x00000000ca6eafff] usable
BIOS-e820: [mem 0x00000000ca6eb000-0x00000000ca96afff] reserved
BIOS-e820: [mem 0x00000000ca96b000-0x00000000caceafff] usable
BIOS-e820: [mem 0x00000000caceb000-0x00000000cad67fff] reserved
BIOS-e820: [mem 0x00000000cad68000-0x00000000cafe7fff] ACPI NVS
BIOS-e820: [mem 0x00000000cafe8000-0x00000000caffffff] ACPI data
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: TOSHIBA Satellite P755/PHQAA, BIOS 2.80 10/30/2012
tsc: Fast TSC calibration using PIT
tsc: Detected 1995.492 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FC0000000 write-back
2 base 0CB800000 mask FFF800000 uncachable
3 base 0CC000000 mask FFC000000 uncachable
4 base 0D0000000 mask FF0000000 uncachable
5 base 0E0000000 mask FE0000000 uncachable
6 base 22FE00000 mask FFFE00000 uncachable
7 base 230000000 mask FF0000000 uncachable
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xcb800000-0xffffffff] usable ==> reserved
last_pfn = 0xcaceb max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcd90-0x000fcd9f]
reserving inaccessible SNB gfx pages
BRK [0x176c01000, 0x176c01fff] PGTABLE
BRK [0x176c02000, 0x176c02fff] PGTABLE
BRK [0x176c03000, 0x176c03fff] PGTABLE
BRK [0x176c04000, 0x176c04fff] PGTABLE
BRK [0x176c05000, 0x176c05fff] PGTABLE
BRK [0x176c06000, 0x176c06fff] PGTABLE
BRK [0x176c07000, 0x176c07fff] PGTABLE
BRK [0x176c08000, 0x176c08fff] PGTABLE
BRK [0x176c09000, 0x176c09fff] PGTABLE
BRK [0x176c0a000, 0x176c0afff] PGTABLE
BRK [0x176c0b000, 0x176c0bfff] PGTABLE
BRK [0x176c0c000, 0x176c0cfff] PGTABLE
RAMDISK: [mem 0x33b13000-0x35d80fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0430 000024 (v02 TOSCPL)
ACPI: XSDT 0x00000000CAFB7070 000064 (v01 TOSCPL TOSCPL00 01072009 AMI 00010013)
ACPI: FACP 0x00000000CAFC6F08 0000F4 (v04 TOSCPL TOSCPL00 01072009 AMI 00010013)
ACPI: DSDT 0x00000000CAFB7168 00FD9A (v02 TOSCPL TOSCPL00 0000003A INTL 20051117)
ACPI: FACS 0x00000000CAFDFF80 000040
ACPI: APIC 0x00000000CAFC7000 000092 (v03 TOSCPL TOSCPL00 01072009 AMI 00010013)
ACPI: MCFG 0x00000000CAFC7098 00003C (v01 TOSCPL TOSCPL00 01072009 MSFT 00000097)
ACPI: SLIC 0x00000000CAFC70D8 000176 (v01 TOSCPL TOSCPL00 01072009 AMI 00010013)
ACPI: HPET 0x00000000CAFC7250 000038 (v01 TOSCPL TOSCPL00 01072009 AMI. 00000004)
ACPI: SSDT 0x00000000CAFC7288 00090C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000CAFC7B98 000996 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 0x00000000CAFC8530 000D15 (v01 SgRef SgTabl 00001000 INTL 20091112)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
NODE_DATA(0) allocated [mem 0x22fdf7000-0x22fdfbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000022fdfffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x000000003fffffff]
node 0: [mem 0x0000000040200000-0x00000000ca540fff]
node 0: [mem 0x00000000ca584000-0x00000000ca6eafff]
node 0: [mem 0x00000000ca96b000-0x00000000caceafff]
node 0: [mem 0x0000000100000000-0x000000022fdfffff]
Zeroed struct page in unavailable ranges: 23612 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000022fdfffff]
On node 0 totalpages: 2073540
DMA zone: 64 pages used for memmap
DMA zone: 156 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12889 pages used for memmap
DMA32 zone: 824872 pages, LIFO batch:63
Normal zone: 19448 pages used for memmap
Normal zone: 1244672 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0xcba00000-0xcf9fffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0xca541000-0xca583fff]
PM: Registered nosave memory: [mem 0xca6eb000-0xca96afff]
PM: Registered nosave memory: [mem 0xcaceb000-0xcad67fff]
PM: Registered nosave memory: [mem 0xcad68000-0xcafe7fff]
PM: Registered nosave memory: [mem 0xcafe8000-0xcaffffff]
PM: Registered nosave memory: [mem 0xcb000000-0xcb9fffff]
PM: Registered nosave memory: [mem 0xcba00000-0xcf9fffff]
PM: Registered nosave memory: [mem 0xcfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xcfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u262144
pcpu-alloc: s144408 r8192 d31720 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 2040983
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8035008K/8294160K available (10252K kernel code, 1241K rwdata, 3316K rodata, 1588K init, 2276K bss, 259152K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 31883 entries in 125 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
Console: colour VGA+ 80x25
console [tty0] enabled
ACPI: Core revision 20180810
TOSHIBA Satellite detected - force copy of DSDT to local memory
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39871803673, max_idle_ns: 881590697202 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.98 BogoMIPS (lpj=7981968)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Vulnerable
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 24K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
core: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 1601936480 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
#2 #3 #4
MDS CPU bug present and SMT on, data leak possible. See for more details.
#5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (31927.87 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xca541000-0xca583fff] (274432 bytes)
PM: Registering ACPI NVS region [mem 0xcad68000-0xcafe7fff] (2621440 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1594075081.032:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Forced DSDT copy: length 0x0FD9A copied locally, original unmapped
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8949E63D1000 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8949E5C3DC00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8949E63E7400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 16 GPEs in block 00 to 3F
acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7f0a000-0xf7f0a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7f08000-0xf7f083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7f00000-0xf7f03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7f07000-0xf7f073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7f06000-0xf7f067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7f05000-0xf7f050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:03:00.0: [8086:0083] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf7e00000-0xf7e01fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:04:00.0: [197b:2392] type 00 class 0x088000
pci 0000:04:00.0: reg 0x10: [mem 0xf7d03000-0xf7d030ff]
pci 0000:04:00.0: Enabling fixed DMA alias to 00.1
pci 0000:04:00.2: [197b:2391] type 00 class 0x080501
pci 0000:04:00.2: reg 0x10: [mem 0xf7d02000-0xf7d020ff]
pci 0000:04:00.3: [197b:2393] type 00 class 0x088000
pci 0000:04:00.3: reg 0x10: [mem 0xf7d01000-0xf7d010ff]
pci 0000:04:00.4: [197b:2394] type 00 class 0x088000
pci 0000:04:00.4: reg 0x10: [mem 0xf7d00000-0xf7d000ff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xca541000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca6eb000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcaceb000-0xcbffffff]
e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x1000-0x100f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x0453] has been reserved
system 00:00: [io 0x0458-0x047f] has been reserved
system 00:00: [io 0x0500-0x057f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0454-0x0457] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0xff2c-0xff2f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs ENE0200 (active)
pnp 00:05: Plug and Play ACPI device, IDs TOS0100 SYN0700 SYN0002 PNP0f13 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xcfa00000-0xcfa00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x20000000-0x201fffff] has been reserved
system 00:08: [mem 0x40000000-0x401fffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xcfa00000-0xfeafffff window]
pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:04: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:05: resource 1 [mem 0xf7c00000-0xf7cfffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 35256K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xc6541000-0xca541000] (64MB)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=40 max_order=21 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
mce: Using 9 MCE banks
microcode: sig=0x206a7, pf=0x10, revision=0x23
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
zswap: loaded using pool lzo/zbud
AppArmor: AppArmor sha1 policy hashing enabled
rtc_cmos 00:01: setting system clock to 2020-07-06 22:38:06 UTC (1594075086)
Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Freeing unused kernel image memory: 1588K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel image memory: 2028K
Freeing unused kernel image memory: 780K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20180810/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20180810/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPRF) (20180810/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\_SB.LDIO) (20180810/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20180810/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPRF) (20180810/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\_SB.LDIO) (20180810/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20180810/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPRF) (20180810/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\_SB.LDIO) (20180810/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
cryptd: max_cpu_qlen set to 1000
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
libphy: r8169: probed
SCSI subsystem initialized
r8169 0000:02:00.0 eth0: RTL8168e/8111e, b8:70:f4:c9:16:16, XID 2c200000, IRQ 24
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
sdhci-pci 0000:04:00.0: SDHCI controller found [197b:2392] (rev 30)
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2391] (rev 30)
sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface.
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
libata version 3.00 loaded.
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.19.0-9-amd64 xhci-hcd
usb usb1: SerialNumber: 0000:05:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:05:00.0: Host supports USB 3.0 SuperSpeed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.19.0-9-amd64 xhci-hcd
usb usb2: SerialNumber: 0000:05:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f08000
r8169 0000:02:00.0 enp2s0: renamed from eth0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 33
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06200 irq 33
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.19.0-9-amd64 ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f07000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.19.0-9-amd64 ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
caller pci_map_rom+0x6a/0x1b0 mapping multiple BARs
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:66: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
random: fast init done
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX0P3D, max UDMA/100
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 3D PQ: 0 ANSI: 5
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
fbcon: inteldrmfb (fb0) is primary device
usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 6 ports detected
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: Optiarc DVD RW AD-7710H, 1.T1, max UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7710H 1.T1 PQ: 0 ANSI: 5
usb 3-1.4: new high-speed USB device number 3 using ehci-pci
usb 4-1.3: new full-speed USB device number 3 using ehci-pci
usb 4-1.3: New USB device found, idVendor=413c, idProduct=301b, bcdDevice=11.19
usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.3: Product: Dell Universal Receiver
usb 4-1.3: Manufacturer: Dell
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Dell Dell Universal Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/0003:413C:301B.0001/input/input7
usb 3-1.4: New USB device found, idVendor=058f, idProduct=b003, bcdDevice= 0.15
usb 3-1.4: New USB device strings: Mfr=6, Product=2, SerialNumber=3
usb 3-1.4: Product: USB 2.0 Camera
usb 3-1.4: Manufacturer: Alcor Corp.
usb 3-1.4: SerialNumber: 0x0001
hid-generic 0003:413C:301B.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell Dell Universal Receiver] on usb-0000:00:1d.0-1.3/input0
input: Dell Dell Universal Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.1/0003:413C:301B.0002/input/input8
input: Dell Dell Universal Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.1/0003:413C:301B.0002/input/input9
input: Dell Dell Universal Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.1/0003:413C:301B.0002/input/input10
hid-generic 0003:413C:301B.0002: input,hidraw1: USB HID v1.11 Mouse [Dell Dell Universal Receiver] on usb-0000:00:1d.0-1.3/input1
hid-generic 0003:413C:301B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Dell Dell Universal Receiver] on usb-0000:00:1d.0-1.3/input2
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:1953525165 != 1953525167
GPT:Alternate GPT header not at the end of the disk.
GPT:1953525165 != 1953525167
GPT: Use GNU Parted to correct GPT errors.
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Image not found (code -22)
psmouse serio1: synaptics: queried max coordinates: x [..5606], y [..4740]
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000/0xa0400/0x0, board id: 0, fw id: 647346
psmouse serio1: synaptics: Toshiba Satellite P755 detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
random: crng init done
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/warsaw.service:7: PIDFile= references path below legacy directory /var/run/, updating /var/run/core.pid → /run/core.pid; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/vpnagentd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/vpnagentd.pid → /run/vpnagentd.pid; please update the unit file accordingly.
systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on udev Kernel Socket.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd-journald[348]: Received request to flush runtime journal from PID 1
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
ACPI: AC Adapter [ACAD] (on-line)
toshiba_haps: Toshiba HDD Active Protection Sensor device
input: PC Speaker as /devices/platform/pcspkr/input/input11
ene_ir: chip is 0x3930 - kbver = 0x00, rev = 0xa1
ene_ir: PLL freq = 1000
ene_ir: KB3926D or higher detected
ene_ir: Firmware regs: cc 04
ene_ir: Hardware features:
ene_ir: * Uses GPIO 40 for IR demodulated input
ene_ir: * Uses new style input buffer
ene_ir: Hardware uses 2 extended buffers:
ene_ir: 0xfac8 - len : 15
ene_ir: 0xf89e - len : 17
ene_ir: Total buffer len = 40
battery: ACPI: Battery Slot [BAT1] (battery present)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Registered IR keymap rc-rc6-mce
IR RC6 protocol handler initialized
rc rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
rc rc0: lirc_dev: driver ene_ir registered at minor = 0, raw IR receiver, no transmitter
input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input12
ene_ir: driver has been successfully loaded
rc rc0: nonsensical timing event of duration 0
rc rc0: two consecutive events of type space
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.24
input: Toshiba input device as /devices/virtual/input/input13
toshiba_acpi: Registering Toshiba accelerometer iio device
toshiba_acpi: Supported laptop features: hotkeys illumination keyboard-backlight touchpad eco-led accelerometer-axes usb-sleep-charge usb-sleep-music cooling-method
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-1000-5.ucode
iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
media: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (058f:b003)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
uvcvideo 3-1.4:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 3-1.4:1.0: Entity type for entity Extension 6 was not initialized!
uvcvideo 3-1.4:1.0: Entity type for entity Camera 1 was not initialized!
input: USB 2.0 Camera: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Adding 7812092k swap on /dev/sda3. Priority:-2 extents:1 across:7812092k FS
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1594075100.728:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=606 comm="apparmor_parser"
audit: type=1400 audit(1594075100.732:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=603 comm="apparmor_parser"
audit: type=1400 audit(1594075100.736:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=602 comm="apparmor_parser"
audit: type=1400 audit(1594075100.776:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=605 comm="apparmor_parser"
audit: type=1400 audit(1594075100.776:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=605 comm="apparmor_parser"
audit: type=1400 audit(1594075100.776:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=600 comm="apparmor_parser"
audit: type=1400 audit(1594075100.808:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=599 comm="apparmor_parser"
audit: type=1400 audit(1594075100.808:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=599 comm="apparmor_parser"
audit: type=1400 audit(1594075100.844:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=604 comm="apparmor_parser"
audit: type=1400 audit(1594075100.844:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=604 comm="apparmor_parser"
tun: Universal TUN/TAP device driver, 1.6
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0: firmware: failed to load rtl_nic/rtl8168e-2.fw (-2)
firmware_class: See for information about missing firmware
r8169 0000:02:00.0: Direct firmware load for rtl_nic/rtl8168e-2.fw failed with error -2
r8169 0000:02:00.0 enp2s0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
RTL8211DN Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 50:d4:f7:7e:d5:82
wlp3s0: send auth to 50:d4:f7:7e:d5:82 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 50:d4:f7:7e:d5:82 (try 1/3)
wlp3s0: RX AssocResp from 50:d4:f7:7e:d5:82 (capab=0x411 status=0 aid=5)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
fuse init (API version 7.27)
perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3144 > 3128), lowering kernel.perf_event_max_sample_rate to 63500
CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU7: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU4: Package temperature above threshold, cpu clock throttled (total events = 468)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 468)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 468)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 468)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 468)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 468)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 468)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 468)
CPU1: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU4: Package temperature above threshold, cpu clock throttled (total events = 1135)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1135)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1135)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 1135)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 1135)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 1135)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1135)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1135)
CPU1: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU5: Package temperature above threshold, cpu clock throttled (total events = 1829)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1829)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1829)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 1829)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1829)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 1829)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1829)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 1829)
CPU2: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Package temperature above threshold, cpu clock throttled (total events = 2835)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 2835)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 2835)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 2835)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 2835)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 2835)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 2835)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 2835)
CPU2: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU3: Package temperature/speed normal