dmesg - 2430-2-116
Linux version 5.4.0-33-generic (buildd@lcy01-amd64-022) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #37-Ubuntu SMP Thu May 21 12:53:59 UTC 2020 (Ubuntu 5.4.0-33.37-generic 5.4.34)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000007cdf1fff] usable
BIOS-e820: [mem 0x000000007cdf2000-0x000000007ce21fff] reserved
BIOS-e820: [mem 0x000000007ce22000-0x000000007ce51fff] usable
BIOS-e820: [mem 0x000000007ce52000-0x000000007cf2efff] ACPI NVS
BIOS-e820: [mem 0x000000007cf2f000-0x000000007e3b2fff] reserved
BIOS-e820: [mem 0x000000007e3b3000-0x000000007e3b3fff] usable
BIOS-e820: [mem 0x000000007e3b4000-0x000000007e3bbfff] ACPI NVS
BIOS-e820: [mem 0x000000007e3bc000-0x000000007e510fff] usable
BIOS-e820: [mem 0x000000007e511000-0x000000007ec39fff] reserved
BIOS-e820: [mem 0x000000007ec3a000-0x000000007ec70fff] usable
BIOS-e820: [mem 0x000000007ec71000-0x000000007eff0fff] reserved
BIOS-e820: [mem 0x000000007eff1000-0x000000007effffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x4c1d1018-0x4c1dfa57] usable ==> usable
e820: update [mem 0x4c1d1018-0x4c1dfa57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x000000004c1d1017] usable
reserve setup_data: [mem 0x000000004c1d1018-0x000000004c1dfa57] usable
reserve setup_data: [mem 0x000000004c1dfa58-0x000000007cdf1fff] usable
reserve setup_data: [mem 0x000000007cdf2000-0x000000007ce21fff] reserved
reserve setup_data: [mem 0x000000007ce22000-0x000000007ce51fff] usable
reserve setup_data: [mem 0x000000007ce52000-0x000000007cf2efff] ACPI NVS
reserve setup_data: [mem 0x000000007cf2f000-0x000000007e3b2fff] reserved
reserve setup_data: [mem 0x000000007e3b3000-0x000000007e3b3fff] usable
reserve setup_data: [mem 0x000000007e3b4000-0x000000007e3bbfff] ACPI NVS
reserve setup_data: [mem 0x000000007e3bc000-0x000000007e510fff] usable
reserve setup_data: [mem 0x000000007e511000-0x000000007ec39fff] reserved
reserve setup_data: [mem 0x000000007ec3a000-0x000000007ec70fff] usable
reserve setup_data: [mem 0x000000007ec71000-0x000000007eff0fff] reserved
reserve setup_data: [mem 0x000000007eff1000-0x000000007effffff] usable
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000043effffff] usable
efi: EFI v2.31 by American Megatrends
efi: ACPI=0x7ced6000 ACPI 2.0=0x7ced6000 SMBIOS=0x7e36fa18
secureboot: Secure boot disabled
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./AM1B-ITX, BIOS P1.60 04/29/2015
tsc: Fast TSC calibration using PIT
tsc: Detected 2435.852 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x43f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000043f000000 aka 17392M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
last_pfn = 0x7f000 max_arch_pfn = 0x400000000
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x417c01000, 0x417c01fff] PGTABLE
BRK [0x417c02000, 0x417c02fff] PGTABLE
BRK [0x417c03000, 0x417c03fff] PGTABLE
BRK [0x417c04000, 0x417c04fff] PGTABLE
BRK [0x417c05000, 0x417c05fff] PGTABLE
BRK [0x417c06000, 0x417c06fff] PGTABLE
BRK [0x417c07000, 0x417c07fff] PGTABLE
BRK [0x417c08000, 0x417c08fff] PGTABLE
BRK [0x417c09000, 0x417c09fff] PGTABLE
BRK [0x417c0a000, 0x417c0afff] PGTABLE
BRK [0x417c0b000, 0x417c0bfff] PGTABLE
BRK [0x417c0c000, 0x417c0cfff] PGTABLE
secureboot: Secure boot disabled
RAMDISK: [mem 0x3a4b3000-0x3d490fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007CED6000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007CED6088 00008C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000007CEDB768 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20190816/tbfadt-615)
ACPI: DSDT 0x000000007CED61A8 0055B9 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x000000007CF25E80 000040
ACPI: APIC 0x000000007CEDB878 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000007CEDB8F8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000007CEDB940 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x000000007CEDB980 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: AAFT 0x000000007CEDB9B8 0001A5 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: VFCT 0x000000007CEDBB60 00EA84 (v01 ALASKA A M I 00000001 AMD 31504F47)
ACPI: BGRT 0x000000007CEEA5E8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000007CEEA620 000E58 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SSDT 0x000000007CEEB478 0046B7 (v02 AMD AGESA 00000002 MSFT 04000000)
ACPI: CRAT 0x000000007CEEFB30 0003F8 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SSDT 0x000000007CEEFF28 0006CA (v01 AMD CPMADPS4 00000001 INTL 20051117)
ACPI: SSDT 0x000000007CEF05F8 001120 (v01 AMD CPMCMN 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043effffff]
NODE_DATA(0) allocated [mem 0x43efd5000-0x43effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000043effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000007cdf1fff]
node 0: [mem 0x000000007ce22000-0x000000007ce51fff]
node 0: [mem 0x000000007e3b3000-0x000000007e3b3fff]
node 0: [mem 0x000000007e3bc000-0x000000007e510fff]
node 0: [mem 0x000000007ec3a000-0x000000007ec70fff]
node 0: [mem 0x000000007eff1000-0x000000007effffff]
node 0: [mem 0x0000000100000000-0x000000043effffff]
Zeroed struct page in unavailable ranges: 16547 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff]
On node 0 totalpages: 3915613
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 7935 pages used for memmap
DMA32 zone: 507838 pages, LIFO batch:63
Normal zone: 53184 pages used for memmap
Normal zone: 3403776 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
e820: update [mem 0x7a91e000-0x7ab5efff] usable ==> reserved
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x4c1d1000-0x4c1d1fff]
PM: Registered nosave memory: [mem 0x4c1df000-0x4c1dffff]
PM: Registered nosave memory: [mem 0x7a91e000-0x7ab5efff]
PM: Registered nosave memory: [mem 0x7cdf2000-0x7ce21fff]
PM: Registered nosave memory: [mem 0x7ce52000-0x7cf2efff]
PM: Registered nosave memory: [mem 0x7cf2f000-0x7e3b2fff]
PM: Registered nosave memory: [mem 0x7e3b4000-0x7e3bbfff]
PM: Registered nosave memory: [mem 0x7e511000-0x7ec39fff]
PM: Registered nosave memory: [mem 0x7ec71000-0x7eff0fff]
PM: Registered nosave memory: [mem 0x7f000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[mem 0x7f000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 3854408
Policy zone: Normal
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 15205484K/15662452K available (14339K kernel code, 2397K rwdata, 4948K rodata, 2712K init, 4992K bss, 456968K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 44484 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1000, preallocated irqs: 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x231c83b8d9c, max_idle_ns: 440795314847 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4871.70 BogoMIPS (lpj=9743408)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD Athlon(tm) 5350 APU with Radeon(tm) R3 (family: 0x16, model: 0x0, stepping: 0x1)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (19486.81 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x7ce52000-0x7cf2efff] (905216 bytes)
PM: Registering ACPI NVS region [mem 0x7e3b4000-0x7e3bbfff] (32768 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 16:35:31, date: 2020-06-09
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1591720531.148:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 5 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 4 GPEs in block 00 to 1F
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME LTR]
acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
pci 0000:00:01.0: [1002:9830] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x24: [mem 0xffb00000-0xffb3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xffb40000-0xffb5ffff pref]
pci 0000:00:01.0: enabling Extended Tags
pci 0000:00:01.0: BAR 0: assigned to efifb
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
pci 0000:00:02.2: enabling Extended Tags
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
pci 0000:00:02.3: enabling Extended Tags
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
pci 0000:00:02.4: enabling Extended Tags
pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xffb60000-0xffb61fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xffb65000-0xffb65fff]
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xffb64000-0xffb640ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xffb63000-0xffb63fff]
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xffb62000-0xffb620ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:01:00.0: reg 0x10: [io 0xe050-0xe057]
pci 0000:01:00.0: reg 0x14: [io 0xe040-0xe043]
pci 0000:01:00.0: reg 0x18: [io 0xe030-0xe037]
pci 0000:01:00.0: reg 0x1c: [io 0xe020-0xe023]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe01f]
pci 0000:01:00.0: reg 0x24: [mem 0xffa00000-0xffa001ff]
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2: bridge window [io 0xe000-0xefff]
pci 0000:00:02.2: bridge window [mem 0xffa00000-0xffafffff]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xff900000-0xff900fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.3: bridge window [mem 0xff900000-0xff9fffff]
pci 0000:00:02.3: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
pci 0000:03:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xff800000-0xff807fff 64bit]
pci 0000:03:00.0: PME# supported from D3cold
pci 0000:00:02.4: PCI bridge to [bus 03]
pci 0000:00:02.4: bridge window [mem 0xff800000-0xff8fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:01.0: vgaarb: setting as boot VGA device
pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:01.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x4c1d1018-0x4fffffff]
e820: reserve RAM buffer [mem 0x7a91e000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7cdf2000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7ce52000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7e3b4000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7e511000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7ec71000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f000000-0x7fffffff]
e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x80000000-0xbfffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x040b] has been reserved
system 00:06: [io 0x04d6] has been reserved
system 00:06: [io 0x0c00-0x0c01] has been reserved
system 00:06: [io 0x0c14] has been reserved
system 00:06: [io 0x0c50-0x0c51] has been reserved
system 00:06: [io 0x0c52] has been reserved
system 00:06: [io 0x0c6c] has been reserved
system 00:06: [io 0x0c6f] has been reserved
system 00:06: [io 0x0cd0-0x0cd1] has been reserved
system 00:06: [io 0x0cd2-0x0cd3] has been reserved
system 00:06: [io 0x0cd4-0x0cd5] has been reserved
system 00:06: [io 0x0cd6-0x0cd7] has been reserved
system 00:06: [io 0x0cd8-0x0cdf] has been reserved
system 00:06: [io 0x0800-0x089f] has been reserved
system 00:06: [io 0x0b20-0x0b3f] has been reserved
system 00:06: [io 0x0900-0x090f] has been reserved
system 00:06: [io 0x0910-0x091f] has been reserved
system 00:06: [io 0xfe00-0xfefe] has been reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:06: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:06: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:06: [mem 0xffc00000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2: bridge window [io 0xe000-0xefff]
pci 0000:00:02.2: bridge window [mem 0xffa00000-0xffafffff]
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.3: bridge window [mem 0xff900000-0xff9fffff]
pci 0000:00:02.3: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
pci 0000:00:02.4: PCI bridge to [bus 03]
pci 0000:00:02.4: bridge window [mem 0xff800000-0xff8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xffa00000-0xffafffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xff900000-0xff9fffff]
pci_bus 0000:02: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xff800000-0xff8fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:12.2: PME# does not work under D3, disabling it
pci 0000:00:13.2: PME# does not work under D3, disabling it
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Initramfs unpacking failed: Decoding failed
Freeing initrd memory: 49016K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x76672000-0x7a672000] (64MB)
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xc0000000, using 5120k, total 5120k
efifb: mode is 1280x1024x32, linelength=5120, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xffb64000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-33-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xffb62000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-33-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 18, io mem 0xffb65000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 5.4.0-33-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.0: irq 18, io mem 0xffb63000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 5.4.0-33-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.4.0-33-generic xhci-hcd
usb usb5: SerialNumber: 0000:00:10.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.4.0-33-generic xhci-hcd
usb usb6: SerialNumber: 0000:00:10.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 7
xhci_hcd 0000:03:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 5.4.0-33-generic xhci-hcd
usb usb7: SerialNumber: 0000:03:00.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 5.4.0-33-generic xhci-hcd
usb usb8: SerialNumber: 0000:03:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: registered as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
x86/pm: family 0x16 cpu detected, MSR saving is needed during suspending.
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: microcode updated early to new patch_level=0x0700010f
microcode: CPU0: patch_level=0x0700010f
microcode: CPU1: patch_level=0x0700010f
microcode: CPU2: patch_level=0x0700010f
microcode: CPU3: patch_level=0x0700010f
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1065760612, 448961)->(1070465877, -4256304)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: c329bf6a4b0ec867054f21d6ed1bd5cc94d1739c'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 8:402:590
rtc_cmos 00:04: setting system clock to 2020-06-09T16:35:31 UTC (1591720531)
acpi_cpufreq: overriding BIOS provided _PSD data
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2712K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1196K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=2357, idProduct=011e, bcdDevice= 2.00
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: 802.11ac WLAN Adapter
usb 1-1: Manufacturer: Realtek
usb 1-1: SerialNumber: 00e04c000001
ahci 0000:01:00.0: version 3.0
ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m512@0xffa00000 port 0xffa00100 irq 42
ata2: SATA max UDMA/133 abar m512@0xffa00000 port 0xffa00180 irq 42
libphy: r8169: probed
r8169 0000:02:00.0 eth0: RTL8168g/8111g, d0:50:99:1d:0b:9f, XID 4c0, IRQ 44
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
usb 5-1: new high-speed USB device number 2 using xhci_hcd
r8169 0000:02:00.0 enp2s0: renamed from eth0
usb 1-2: new high-speed USB device number 3 using ehci-pci
usb 5-1: New USB device found, idVendor=0930, idProduct=6545, bcdDevice= 1.00
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: DataTraveler G3
usb 5-1: Manufacturer: Kingston
usb 5-1: SerialNumber: 001372995FC8EB1155100188
usb-storage 5-1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 5-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 1-2: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: Flash Drive
usb 1-2: Manufacturer: Samsung
usb 1-2: SerialNumber: 0377317080009322
usb-storage 1-2:1.0: USB Mass Storage device detected
usb-storage 1-2:1.0: Quirks match for vid 090c pid 1000: 400
scsi host3: usb-storage 1-2:1.0
usb 4-3: new low-speed USB device number 2 using ohci-pci
usb 4-3: New USB device found, idVendor=17ef, idProduct=6019, bcdDevice= 1.00
usb 4-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-3: Product: Lenovo Optical USB Mouse
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Lenovo Optical USB Mouse as /devices/pci0000:00/0000:00:13.0/usb4/4-3/4-3:1.0/0003:17EF:6019.0001/input/input2
hid-generic 0003:17EF:6019.0001: input,hidraw0: USB HID v1.11 Mouse [Lenovo Optical USB Mouse] on usb-0000:00:13.0-3/input0
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-11: Samsung SSD 860 PRO 256GB, RVM01B6Q, max UDMA/133
ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: Enabling discard_zeroes_data
sda: sda1
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] supports TCG Opal
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 2435.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x231d0e2e408, max_idle_ns: 440795230632 ns
clocksource: Switched to clocksource tsc
usb 4-4: new low-speed USB device number 3 using ohci-pci
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT01B6Q, max UDMA/133
ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: Enabling discard_zeroes_data
sdb: sdb1 sdb2
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sdb] supports TCG Opal
sd 1:0:0:0: [sdb] Attached SCSI disk
random: fast init done
usb 4-4: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-4: Product: USB Keyboard
usb 4-4: Manufacturer: Logitech
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-4/4-4:1.0/0003:046D:C31C.0002/input/input3
scsi 2:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 15124992 512-byte logical blocks: (7.74 GB/7.21 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1 sdc2 sdc3
sd 2:0:0:0: [sdc] Attached SCSI removable disk
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:13.0-4/input0
input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:13.0/usb4/4-4/4-4:1.1/0003:046D:C31C.0003/input/input4
input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:13.0/usb4/4-4/4-4:1.1/0003:046D:C31C.0003/input/input5
hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:13.0-4/input1
scsi 3:0:0:0: Direct-Access Samsung Flash Drive 1100 PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] 62668800 512-byte logical blocks: (32.1 GB/29.9 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 43 00 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI removable disk
raid6: sse2x4 gen() 5411 MB/s
raid6: sse2x4 xor() 3453 MB/s
raid6: sse2x2 gen() 4486 MB/s
raid6: sse2x2 xor() 2970 MB/s
raid6: sse2x1 gen() 3949 MB/s
raid6: sse2x1 xor() 2391 MB/s
raid6: using algorithm sse2x4 gen() 5411 MB/s
raid6: .... xor() 3453 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device fsid 2f72c3ab-fb25-4d68-a4d1-424b8a0fce5e devid 1 transid 11 /dev/sdb1
BTRFS: device fsid 65952a0a-2c4a-4f56-b078-2b05ae31399f devid 1 transid 1676 /dev/sda1
BTRFS info (device sda1): disk space caching is enabled
BTRFS info (device sda1): has skinny extents
BTRFS info (device sda1): enabling ssd optimizations
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
BTRFS info (device sda1): disk space caching is enabled
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
BTRFS warning (device sda1): swapfile must not be copy-on-write
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: swapfile.swap: Swap process exited, code=exited, status=255/EXCEPTION
systemd[1]: swapfile.swap: Failed with result 'exit-code'.
systemd[1]: Failed to activate swap /swapfile.
fbcon: Taking over console
Console: switching to colour frame buffer device 160x64
systemd[1]: Dependency failed for Swap.
systemd[1]: swap.target: Job swap.target/start failed with result 'dependency'.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting Show Plymouth Boot Screen...
systemd[1]: Received SIGRTMIN+20 from PID 389 (plymouthd).
systemd[1]: Started Show Plymouth Boot Screen.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Started Journal Service.
systemd-journald[336]: Received client request to flush runtime journal.
cryptd: max_cpu_qlen set to 1000
systemd-journald[336]: File /var/log/journal/03d2e18ac5e14eeeb0541eaf19a3c7aa/system.journal corrupted or uncleanly shut down, renaming and replacing.
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
[drm] radeon kernel modesetting enabled.
radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xc0000000 -> 0xcfffffff
radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xd0000000 -> 0xd07fffff
radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 5: 0xffb00000 -> 0xffb3ffff
checking generic (c0000000 500000) vs hw (c0000000 10000000)
fb0: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
radeon 0000:00:01.0: vgaarb: deactivate vga console
[drm] initializing kernel modesetting (KABINI 0x1002:0x9830 0x1849:0x9830 0x00).
[drm] doorbell mmio base: 0xD0000000
[drm] doorbell mmio size: 8388608
ATOM BIOS: AMD
radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 7648906 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading kabini Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] Found UVD firmware Version: 1.64 Family ID: 9
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x(____ptrval____)
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0x(____ptrval____)
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0x(____ptrval____)
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x(____ptrval____)
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0x(____ptrval____)
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0x(____ptrval____)
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0x(____ptrval____)
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0x(____ptrval____)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 1 succeeded in 2 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 14 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
BTRFS info (device sdb1): disk space caching is enabled
BTRFS info (device sdb1): has skinny extents
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
BTRFS info (device sdb1): enabling ssd optimizations
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
audit: type=1400 audit(1591720536.135:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=641 comm="apparmor_parser"
audit: type=1400 audit(1591720536.135:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=641 comm="apparmor_parser"
audit: type=1400 audit(1591720536.135:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=640 comm="apparmor_parser"
audit: type=1400 audit(1591720536.147:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=639 comm="apparmor_parser"
audit: type=1400 audit(1591720536.147:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=639 comm="apparmor_parser"
audit: type=1400 audit(1591720536.147:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=644 comm="apparmor_parser"
audit: type=1400 audit(1591720536.151:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser"
audit: type=1400 audit(1591720536.151:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=642 comm="apparmor_parser"
audit: type=1400 audit(1591720536.151:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser"
audit: type=1400 audit(1591720536.151:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=642 comm="apparmor_parser"
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] HDMI-A-2
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm:dce6_audio_get_pin [radeon]] *ERROR* No connected audio pins found!
[drm] fb mappable at 0xC0731000
[drm] vram apper at 0xC0000000
[drm] size 33177600
[drm] fb depth is 24
[drm] pitch is 15360
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel
AMD-Vi: AMD IOMMUv2 functionality not available on this system
[drm] amdgpu kernel modesetting enabled.
Parsing CRAT table with 1 nodes
Ignoring ACPI CRAT on non-APU system
Virtual CRAT table created for CPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add CPU node
Finished initializing topology
[drm:dce6_audio_get_pin [radeon]] *ERROR* No connected audio pins found!
[drm:dce6_audio_get_pin [radeon]] *ERROR* No connected audio pins found!
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
Generic FE-GE Realtek PHY r8169-200:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[drm:dce6_audio_get_pin [radeon]] *ERROR* No connected audio pins found!
r8169 0000:02:00.0 enp2s0: Link is Down
[drm:dce6_audio_get_pin [radeon]] *ERROR* No connected audio pins found!
[drm:dce6_audio_get_pin [radeon]] *ERROR* No connected audio pins found!
[drm:dce6_audio_get_pin [radeon]] *ERROR* No connected audio pins found!
[drm:dce6_audio_get_pin [radeon]] *ERROR* No connected audio pins found!
[drm:dce6_audio_get_pin [radeon]] *ERROR* No connected audio pins found!
r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
mce: [Hardware Error]: Machine check events logged
[Hardware Error]: Corrected error, no action required.
[Hardware Error]: CPU:3 (16:0:1) MC1_STATUS[Over|CE|-|AddrV|-|-|-]: 0xd400001000000151
[Hardware Error]: Error Addr: 0x0000ffffb5856360
[Hardware Error]: MC1 Error: Data/tag array parity error for a tag hit.
[Hardware Error]: cache level: L1, tx: INSN, mem-tx: IRD
[drm:dce6_audio_get_pin [radeon]] *ERROR* No connected audio pins found!
[drm:dce6_audio_get_pin [radeon]] *ERROR* No connected audio pins found!
[drm:dce6_audio_get_pin [radeon]] *ERROR* No connected audio pins found!
perf: interrupt took too long (2521 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
perf: interrupt took too long (3199 > 3151), lowering kernel.perf_event_max_sample_rate to 62500
perf: interrupt took too long (3999 > 3998), lowering kernel.perf_event_max_sample_rate to 50000
perf: interrupt took too long (5002 > 4998), lowering kernel.perf_event_max_sample_rate to 39750