dmesg - phoronix_gputest
microcode: microcode updated early to revision 0x1d, date = 2018-05-11
Linux version 5.4.0-31-generic (buildd@lgw01-amd64-059) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #35-Ubuntu SMP Thu May 7 20:20:34 UTC 2020 (Ubuntu 5.4.0-31.35-generic 5.4.34)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfecffff] usable
BIOS-e820: [mem 0x00000000cfed0000-0x00000000cfed0fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfed1000-0x00000000cfedffff] ACPI data
BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. X58A-UD3R/X58A-UD3R, BIOS FE 12/23/2010
tsc: Fast TSC calibration using PIT
tsc: Detected 3064.541 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CEFFF write-protect
CF000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 0D0000000 mask FF0000000 uncachable
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask FC0000000 write-back
5 base 230000000 mask FF0000000 uncachable
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 8192M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 6 lose cover RAM: 0G
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
last_pfn = 0xcfed0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5ea0-0x000f5eaf]
check: Scanning 1 areas for low memory corruption
BRK [0x5ec01000, 0x5ec01fff] PGTABLE
BRK [0x5ec02000, 0x5ec02fff] PGTABLE
BRK [0x5ec03000, 0x5ec03fff] PGTABLE
BRK [0x5ec04000, 0x5ec04fff] PGTABLE
BRK [0x5ec05000, 0x5ec05fff] PGTABLE
BRK [0x5ec06000, 0x5ec06fff] PGTABLE
BRK [0x5ec07000, 0x5ec07fff] PGTABLE
BRK [0x5ec08000, 0x5ec08fff] PGTABLE
BRK [0x5ec09000, 0x5ec09fff] PGTABLE
RAMDISK: [mem 0x3219b000-0x350c4fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F7880 000014 (v00 GBT )
ACPI: RSDT 0x00000000CFED1040 000044 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000CFED10C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000CFED1180 00596A (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 0x00000000CFED0000 000040
ACPI: HPET 0x00000000CFED6CC0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000CFED6D40 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 0x00000000CFED6D80 0004D0 (v01 GBT 00000000 00000000)
ACPI: MATS 0x00000000CFED7250 000034 (v01 GBT 00000000 00000000)
ACPI: TAMG 0x00000000CFED72C0 000C7A (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 0x00000000CFED6B40 00012C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 0x00000000CFED7F40 002B1C (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
NODE_DATA(0) allocated [mem 0x22ffd1000-0x22fffbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000022fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000cfecffff]
node 0: [mem 0x0000000100000000-0x000000022fffffff]
Zeroed struct page in unavailable ranges: 402 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff]
On node 0 totalpages: 2096750
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13244 pages used for memmap
DMA32 zone: 847568 pages, LIFO batch:63
Normal zone: 19456 pages used for memmap
Normal zone: 1245184 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcfed0000-0xcfed0fff]
PM: Registered nosave memory: [mem 0xcfed1000-0xcfedffff]
PM: Registered nosave memory: [mem 0xcfee0000-0xcfefffff]
PM: Registered nosave memory: [mem 0xcff00000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[mem 0xcff00000-0xf3ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 2063965
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8092816K/8387000K available (14339K kernel code, 2397K rwdata, 4948K rodata, 2712K init, 4992K bss, 294184K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 44484 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 552, preallocated irqs: 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR-IR: This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c2c6f2035f, max_idle_ns: 440795342310 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6129.08 BogoMIPS (lpj=12258164)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (family: 0x6, model: 0x1a, stepping: 0x5)
Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver.
core: CPU erratum AAJ80 worked around
core: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4
MDS CPU bug present and SMT on, data leak possible. See for more details.
#5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 8 processors activated (49032.65 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xcfed0000-0xcfed0fff] (4096 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 11:05:16, date: 2020-05-22
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1590145516.160:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 9 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xcfef0000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-3f]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:00.0: enabling Extended Tags
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: enabling Extended Tags
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: enabling Extended Tags
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: enabling Extended Tags
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
pci 0000:00:13.0: [8086:342d] type 00 class 0x080020
pci 0000:00:13.0: reg 0x10: [mem 0xfbfff000-0xfbffffff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:15.0: [8086:342f] type 00 class 0x080020
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f]
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f]
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbff8000-0xfbffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018a
pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 0x20: [io 0xf900-0xf90f]
pci 0000:00:1f.2: reg 0x24: [io 0xf800-0xf80f]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf600-0xf607]
pci 0000:00:1f.5: reg 0x14: [io 0xf500-0xf503]
pci 0000:00:1f.5: reg 0x18: [io 0xf400-0xf407]
pci 0000:00:1f.5: reg 0x1c: [io 0xf300-0xf303]
pci 0000:00:1f.5: reg 0x20: [io 0xf200-0xf20f]
pci 0000:00:1f.5: reg 0x24: [io 0xf100-0xf10f]
pci 0000:01:00.0: [1b4b:91a3] type 00 class 0x01018f
pci 0000:01:00.0: reg 0x10: [io 0xaf00-0xaf07]
pci 0000:01:00.0: reg 0x14: [io 0xae00-0xae03]
pci 0000:01:00.0: reg 0x18: [io 0xad00-0xad07]
pci 0000:01:00.0: reg 0x1c: [io 0xac00-0xac03]
pci 0000:01:00.0: reg 0x20: [io 0xab00-0xab0f]
pci 0000:01:00.0: reg 0x24: [mem 0xfb9ff000-0xfb9ff7ff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.0: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfb7fe000-0xfb7fffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:03:00.0: [1002:1478] type 01 class 0x060400
pci 0000:03:00.0: reg 0x10: [mem 0xfbefc000-0xfbefffff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x16 link at 0000:00:03.0 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:00:03.0: PCI bridge to [bus 03-05]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xfbd00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:04:00.0: [1002:1479] type 01 class 0x060400
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04-05]
pci 0000:03:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:03:00.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:03:00.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:05:00.0: [1002:7310] type 00 class 0x030000
pci 0000:05:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:05:00.0: reg 0x18: [mem 0xefe00000-0xefffffff 64bit pref]
pci 0000:05:00.0: reg 0x20: [io 0xbe00-0xbeff]
pci 0000:05:00.0: reg 0x24: [mem 0xfbd00000-0xfbd7ffff]
pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:05:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x16 link at 0000:00:03.0 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:05:00.1: [1002:ab38] type 00 class 0x040300
pci 0000:05:00.1: reg 0x10: [mem 0xfbdfc000-0xfbdfffff]
pci 0000:05:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:04:00.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:04:00.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [197b:2363] type 00 class 0x010185
pci 0000:07:00.0: reg 0x24: [mem 0xfbcfe000-0xfbcfffff]
pci 0000:07:00.0: PME# supported from D3hot
pci 0000:07:00.1: [197b:2363] type 00 class 0x010185
pci 0000:07:00.1: reg 0x10: [io 0xef00-0xef07]
pci 0000:07:00.1: reg 0x14: [io 0xee00-0xee03]
pci 0000:07:00.1: reg 0x18: [io 0xed00-0xed07]
pci 0000:07:00.1: reg 0x1c: [io 0xec00-0xec03]
pci 0000:07:00.1: reg 0x20: [io 0xeb00-0xeb0f]
pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:08:00.0: [197b:2363] type 00 class 0x010185
pci 0000:08:00.0: reg 0x24: [mem 0xfbbfe000-0xfbbfffff]
pci 0000:08:00.0: PME# supported from D3hot
pci 0000:08:00.1: [197b:2363] type 00 class 0x010185
pci 0000:08:00.1: reg 0x10: [io 0xdf00-0xdf07]
pci 0000:08:00.1: reg 0x14: [io 0xde00-0xde03]
pci 0000:08:00.1: reg 0x18: [io 0xdd00-0xdd07]
pci 0000:08:00.1: reg 0x1c: [io 0xdc00-0xdc03]
pci 0000:08:00.1: reg 0x20: [io 0xdb00-0xdb0f]
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:09:00.0: reg 0x10: [io 0xce00-0xceff]
pci 0000:09:00.0: reg 0x18: [mem 0xfbaff000-0xfbafffff 64bit pref]
pci 0000:09:00.0: reg 0x20: [mem 0xfbaf8000-0xfbafbfff 64bit pref]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: ASPM: current common clock configuration is broken, reconfiguring
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff 64bit pref]
pci_bus 0000:0a: extended config space not accessible
pci 0000:0a:06.0: [104c:8024] type 00 class 0x0c0010
pci 0000:0a:06.0: reg 0x10: [mem 0xfb8ff000-0xfb8ff7ff]
pci 0000:0a:06.0: reg 0x14: [mem 0xfb8f8000-0xfb8fbfff]
pci 0000:0a:06.0: supports D1 D2
pci 0000:0a:06.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xcfef0000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:05:00.0: vgaarb: setting as boot VGA device
pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:05:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
pci 0000:3f:00.0: [8086:2c41] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:3f:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:3f:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:3f:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:3f:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:3f:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:3f:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:3f:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:3f:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:3f:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:3f:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:3f:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:3f:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:3f:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:3f:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:3f:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfed0000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet: 4 channels of 0 reserved for per-cpu timers
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x0800-0x087f] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0400-0x04cf] could not be reserved
system 00:02: [io 0x04d2-0x04ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0x000cf600-0x000cffff] has been reserved
system 00:04: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:04: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:04: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:04: [mem 0xcfed0000-0xcfedffff] could not be reserved
system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:04: [mem 0x00100000-0xcfecffff] could not be reserved
system 00:04: [mem 0xcfee0000-0xcfefffff] could not be reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
system 00:04: [mem 0x000e0000-0x000effff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 5 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 09] add_size 400000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.4: BAR 14: assigned [mem 0xf0800000-0xf0bfffff]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfb900000-0xfb90ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:05:00.0: BAR 6: assigned [mem 0xfbd80000-0xfbd9ffff pref]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:04:00.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:04:00.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: PCI bridge to [bus 04-05]
pci 0000:03:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:03:00.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:03:00.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03-05]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xfbd00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.3: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf0800000-0xf0bfffff]
pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a]
pci 0000:00:1e.0: bridge window [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xcfef0000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:02: resource 1 [mem 0xfb700000-0xfb7fffff]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xfbd00000-0xfbefffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:04: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0xf0000000-0xf01fffff]
pci_bus 0000:06: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:07: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:08: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:08: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:09: resource 1 [mem 0xf0800000-0xf0bfffff]
pci_bus 0000:09: resource 2 [mem 0xfba00000-0xfbafffff 64bit pref]
pci_bus 0000:0a: resource 1 [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0a: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:0a: resource 8 [mem 0xcfef0000-0xfebfffff window]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x662 took 20207 usecs
pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x662 took 22952 usecs
pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:05:00.1: D0 power state depends on 0000:05:00.0
pci 0000:07:00.0: async suspend disabled to avoid multi-function power-on ordering issue
pci 0000:07:00.1: async suspend disabled to avoid multi-function power-on ordering issue
pci 0000:08:00.0: async suspend disabled to avoid multi-function power-on ordering issue
pci 0000:08:00.1: async suspend disabled to avoid multi-function power-on ordering issue
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 48296K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xcbed0000-0xcfed0000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 3840x2160x32, linelength=15360, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 32448k, total 32448k
fbcon: Deferring console take-over
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Linux agpgart interface v0.103
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf200 irq 19
ata4: SATA max UDMA/133 cmd 0xf400 ctl 0xf300 bmdma 0xf208 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbffe000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-31-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffd000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-31-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-31-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-31-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 5.4.0-31-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 5.4.0-31-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 5.4.0-31-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 5.4.0-31-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 5.4.0-31-generic xhci-hcd
usb usb9: SerialNumber: 0000:02:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
usb usb10: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 5.4.0-31-generic xhci-hcd
usb usb10: SerialNumber: 0000:02:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected]
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: CPU model not supported
ledtrig-cpu: registered to indicate activity on CPUs
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x106a5, pf=0x2, revision=0x1d
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (946528348, 163585)->(949993769, -3301836)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 0877109df09d880f03477498890f5473480a68b0'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 4:326:75
rtc_cmos 00:01: setting system clock to 2020-05-22T11:05:17 UTC (1590145517)
usb 9-1: new high-speed USB device number 2 using xhci_hcd
usb 9-1: New USB device found, idVendor=0930, idProduct=6545, bcdDevice= 1.00
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 9-1: Product: TransMemory
usb 9-1: Manufacturer: TOSHIBA
usb 9-1: SerialNumber: 001CC0C61220EB6114200008
usb 3-1: new low-speed USB device number 2 using uhci_hcd
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
usb 3-1: New USB device found, idVendor=045e, idProduct=07b9, bcdDevice= 1.14
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Keyboard
usb 3-1: Manufacturer: LITEON Technology
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.00: ATA-8: Hitachi HTS723232A7A364, EC2OA60W, max UDMA/100
ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA Hitachi HTS72323 A60W PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2712K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1196K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
random: fast init done
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
ahci 0000:01:00.0: version 3.0
ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
usb-storage 9-1:1.0: USB Mass Storage device detected
pata_jmicron 0000:07:00.1: enabling device (0000 -> 0001)
scsi host5: pata_jmicron
scsi host4: usb-storage 9-1:1.0
usbcore: registered new interface driver usb-storage
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver uas
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20190816/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
scsi host6: pata_jmicron
ata5: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 18
ata6: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 18
pata_jmicron 0000:08:00.1: enabling device (0000 -> 0001)
scsi host7: pata_jmicron
scsi host8: pata_jmicron
ata7: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
ata8: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
libphy: r8169: probed
r8169 0000:09:00.0 eth0: RTL8168e/8111e, 1c:6f:65:9f:d8:ac, XID 2c2, IRQ 41
r8169 0000:09:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl IDE mode
ahci 0000:01:00.0: flags: 64bit ncq fbs pio
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
scsi host9: ahci
scsi host10: ahci
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
scsi host11: ahci
scsi host12: ahci
scsi host13: ahci
scsi host14: ahci
scsi host15: ahci
scsi host16: ahci
ata9: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff100 irq 40
ata10: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff180 irq 40
ata11: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff200 irq 40
ata12: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff280 irq 40
ata13: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff300 irq 40
ata14: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff380 irq 40
ata15: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff400 irq 40
ata16: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff480 irq 40
r8169 0000:09:00.0 enp9s0: renamed from eth0
ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi host17: ahci
scsi host18: ahci
ata17: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 17
ata18: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 17
tsc: Refined TSC clocksource calibration: 3064.497 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c2c4534314, max_idle_ns: 440795291777 ns
clocksource: Switched to clocksource tsc
ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi host19: ahci
scsi host20: ahci
ata19: SATA max UDMA/133 abar m8192@0xfbbfe000 port 0xfbbfe100 irq 19
ata20: SATA max UDMA/133 abar m8192@0xfbbfe000 port 0xfbbfe180 irq 19
gpio_ich gpio_ich.2.auto: GPIO from 451 to 511
input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:045E:07B9.0001/input/input3
firewire_ohci 0000:0a:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
hid-generic 0003:045E:07B9.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:1a.0-1/input0
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata18: SATA link down (SStatus 0 SControl 300)
ata15: SATA link down (SStatus 0 SControl 300)
ata14: SATA link down (SStatus 0 SControl 300)
ata17: SATA link down (SStatus 0 SControl 300)
ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata16.00: configured for UDMA/66
ata19: SATA link down (SStatus 0 SControl 300)
ata20: SATA link down (SStatus 0 SControl 300)
usb 3-2: new low-speed USB device number 3 using uhci_hcd
scsi 16:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
scsi 16:0:0:0: Attached scsi generic sg1 type 3
firewire_core 0000:0a:06.0: created device fw0: GUID 0099284e001c6f65, S400
usb 3-2: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Dell MS116 USB Optical Mouse
usb 3-2: Manufacturer: PixArt
input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/0003:413C:301A.0002/input/input4
hid-generic 0003:413C:301A.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:1a.0-2/input0
scsi 4:0:0:0: Direct-Access TOSHIBA TransMemory PMAP PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 15124992 512-byte logical blocks: (7.74 GB/7.21 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
fbcon: Taking over console
Console: switching to colour frame buffer device 240x67
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: [email protected]: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Finished udev Coldplug all Devices.
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
systemd[1]: Activated swap /swapfile.
systemd[1]: Reached target Swap.
systemd[1]: Started Journal Service.
lp: driver loaded but no devices found
systemd-journald[404]: Received client request to flush runtime journal.
ppdev: user-space parallel port driver
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (INTERRUPT)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel
AMD-Vi: AMD IOMMUv2 functionality not available on this system
[drm] amdgpu kernel modesetting enabled.
CRAT table not found
Virtual CRAT table created for CPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add CPU node
Finished initializing topology
amdgpu 0000:05:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xd0000000 -> 0xdfffffff
amdgpu 0000:05:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xefe00000 -> 0xefffffff
amdgpu 0000:05:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfbd00000 -> 0xfbd7ffff
checking generic (d0000000 1fb0000) vs hw (d0000000 10000000)
fb0: switching to amdgpudrmfb from VESA VGA
Console: switching to colour dummy device 80x25
amdgpu 0000:05:00.0: vgaarb: deactivate vga console
[drm] initializing kernel modesetting (NAVI10 0x1002:0x7310 0x1002:0x071E 0x00).
[drm] register mmio base: 0xFBD00000
[drm] register mmio size: 524288
[drm] PCIE atomic ops is not supported
[drm] set register base offset for ATHUB
[drm] set register base offset for CLKA
[drm] set register base offset for CLKA
[drm] set register base offset for CLKA
[drm] set register base offset for CLKA
[drm] set register base offset for CLKA
[drm] set register base offset for DF
[drm] set register base offset for DMU
[drm] set register base offset for GC
[drm] set register base offset for HDP
[drm] set register base offset for MMHUB
[drm] set register base offset for MP0
[drm] set register base offset for MP1
[drm] set register base offset for NBIF
[drm] set register base offset for NBIF
[drm] set register base offset for OSSSYS
[drm] set register base offset for SDMA0
[drm] set register base offset for SDMA1
[drm] set register base offset for SMUIO
[drm] set register base offset for THM
[drm] set register base offset for UVD
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
snd_hda_intel 0000:05:00.1: Handle vga_switcheroo audio client
resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than pnp 00:04 [mem 0x000cf600-0x000cffff]
caller pci_map_rom+0x71/0x18c mapping multiple BARs
amdgpu 0000:05:00.0: No more image in the PCI ROM
ATOM BIOS: 113-D1860101-066
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] VCN jpeg decode is enabled in VM mode
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:05:00.0: VRAM: 32752M 0x0000008000000000 - 0x00000087FEFFFFFF (32752M used)
amdgpu 0000:05:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[drm] Detected VRAM RAM=32752M, BAR=256M
[drm] RAM width 256bits GDDR6
[TTM] Zone kernel: Available graphics memory: 4074554 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 32752M of VRAM memory ready
[drm] amdgpu: 5968M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x0000008001FA4000).
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card1/input5
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card1/input6
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card1/input7
input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card1/input8
input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card1/input9
input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card1/input10
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[drm] use_doorbell being set to: [true]
[drm] use_doorbell being set to: [true]
[drm] Found VCN firmware Version ENC: 1.7 DEC: 4 VEP: 0 Revision: 13
[drm] PSP loading VCN firmware
[drm] reserve 0xa00000 from 0x87fe400000 for PSP TMR
amdgpu: [powerplay] smu driver if version = 0x00000033, smu fw if version = 0x00000035, smu fw version = 0x002a3200 (42.50.0)
amdgpu: [powerplay] SMU driver if version not matched
amdgpu: [powerplay] SMU is initialized successfully!
[drm] Display Core initialized with v3.2.48!
snd_hda_intel 0000:05:00.1: bound 0000:05:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] kiq ring mec 2 pipe 1 q 0
[drm] ring test on 10 succeeded in 65 usecs
[drm] ring test on 10 succeeded in 16 usecs
[drm] gfx 0 ring me 0 pipe 0 q 0
[drm] ring test on 0 succeeded in 16 usecs
[drm] gfx 1 ring me 0 pipe 1 q 0
[drm] ring test on 1 succeeded in 3 usecs
[drm] compute ring 0 mec 1 pipe 0 q 0
[drm] ring test on 2 succeeded in 5 usecs
[drm] compute ring 1 mec 1 pipe 1 q 0
[drm] ring test on 3 succeeded in 3 usecs
[drm] compute ring 2 mec 1 pipe 2 q 0
[drm] ring test on 4 succeeded in 3 usecs
[drm] compute ring 3 mec 1 pipe 3 q 0
[drm] ring test on 5 succeeded in 3 usecs
[drm] compute ring 4 mec 1 pipe 0 q 1
[drm] ring test on 6 succeeded in 3 usecs
[drm] compute ring 5 mec 1 pipe 1 q 1
[drm] ring test on 7 succeeded in 3 usecs
[drm] compute ring 6 mec 1 pipe 2 q 1
[drm] ring test on 8 succeeded in 3 usecs
[drm] compute ring 7 mec 1 pipe 3 q 1
[drm] ring test on 9 succeeded in 2 usecs
[drm] ring test on 11 succeeded in 17 usecs
[drm] ring test on 12 succeeded in 19 usecs
[drm] VCN decode and encode initialized successfully(under DPG Mode).
kfd kfd: Allocated 3969056 bytes on gart
Virtual CRAT table created for GPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add dGPU node [0x7310:0x1002]
kfd kfd: added device 1002:7310
[drm] fb mappable at 0xD216D000
[drm] vram apper at 0xD0000000
[drm] size 33177600
[drm] fb depth is 24
[drm] pitch is 15360
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
amdgpu 0000:05:00.0: fb0: amdgpudrmfb frame buffer device
amdgpu 0000:05:00.0: ring 0(gfx_0.0.0) uses VM inv eng 4 on hub 0
amdgpu 0000:05:00.0: ring 1(gfx_0.1.0) uses VM inv eng 5 on hub 0
amdgpu 0000:05:00.0: ring 2(comp_1.0.0) uses VM inv eng 6 on hub 0
amdgpu 0000:05:00.0: ring 3(comp_1.1.0) uses VM inv eng 7 on hub 0
amdgpu 0000:05:00.0: ring 4(comp_1.2.0) uses VM inv eng 8 on hub 0
amdgpu 0000:05:00.0: ring 5(comp_1.3.0) uses VM inv eng 9 on hub 0
amdgpu 0000:05:00.0: ring 6(comp_1.0.1) uses VM inv eng 10 on hub 0
amdgpu 0000:05:00.0: ring 7(comp_1.1.1) uses VM inv eng 11 on hub 0
amdgpu 0000:05:00.0: ring 8(comp_1.2.1) uses VM inv eng 12 on hub 0
amdgpu 0000:05:00.0: ring 9(comp_1.3.1) uses VM inv eng 13 on hub 0
amdgpu 0000:05:00.0: ring 10(kiq_2.1.0) uses VM inv eng 14 on hub 0
amdgpu 0000:05:00.0: ring 11(sdma0) uses VM inv eng 15 on hub 0
amdgpu 0000:05:00.0: ring 12(sdma1) uses VM inv eng 16 on hub 0
amdgpu 0000:05:00.0: ring 13(vcn_dec) uses VM inv eng 4 on hub 1
amdgpu 0000:05:00.0: ring 14(vcn_enc0) uses VM inv eng 5 on hub 1
amdgpu 0000:05:00.0: ring 15(vcn_enc1) uses VM inv eng 6 on hub 1
amdgpu 0000:05:00.0: ring 16(vcn_jpeg) uses VM inv eng 7 on hub 1
[drm] Initialized amdgpu 3.35.0 20150101 for 0000:05:00.0 on minor 0
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
audit: type=1400 audit(1590145534.949:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=727 comm="apparmor_parser"
audit: type=1400 audit(1590145534.949:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=729 comm="apparmor_parser"
audit: type=1400 audit(1590145534.977:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=724 comm="apparmor_parser"
audit: type=1400 audit(1590145534.977:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=724 comm="apparmor_parser"
audit: type=1400 audit(1590145534.977:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=724 comm="apparmor_parser"
audit: type=1400 audit(1590145534.977:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=725 comm="apparmor_parser"
audit: type=1400 audit(1590145534.977:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=725 comm="apparmor_parser"
audit: type=1400 audit(1590145535.025:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=734 comm="apparmor_parser"
audit: type=1400 audit(1590145535.077:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=733 comm="apparmor_parser"
audit: type=1400 audit(1590145535.077:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=733 comm="apparmor_parser"
kauditd_printk_skb: 24 callbacks suppressed
audit: type=1400 audit(1590145546.841:36): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=868 comm="cups-browsed" capability=23 capname="sys_nice"
RTL8211DN Gigabit Ethernet r8169-900:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-900:00, irq=IGNORE)
r8169 0000:09:00.0 enp9s0: Link is Down
r8169 0000:09:00.0 enp9s0: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes ready
rfkill: input handler disabled
rfkill: input handler enabled
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
rfkill: input handler disabled
perf: interrupt took too long (2609 > 2500), lowering kernel.perf_event_max_sample_rate to 76500
perf: interrupt took too long (3283 > 3261), lowering kernel.perf_event_max_sample_rate to 60750
usb 9-1: USB disconnect, device number 2
usb 9-1: new high-speed USB device number 3 using xhci_hcd
usb 9-1: New USB device found, idVendor=0930, idProduct=6545, bcdDevice= 1.00
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 9-1: Product: TransMemory
usb 9-1: Manufacturer: TOSHIBA
usb 9-1: SerialNumber: 001CC0C61220EB6114200008
usb-storage 9-1:1.0: USB Mass Storage device detected
scsi host4: usb-storage 9-1:1.0
scsi 4:0:0:0: Direct-Access TOSHIBA TransMemory PMAP PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 15124992 512-byte logical blocks: (7.74 GB/7.21 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
perf: interrupt took too long (4142 > 4103), lowering kernel.perf_event_max_sample_rate to 48250
perf: interrupt took too long (5439 > 5177), lowering kernel.perf_event_max_sample_rate to 36750
audit: type=1400 audit(1590163218.657:37): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=4398 comm="cups-browsed" capability=23 capname="sys_nice"
perf: interrupt took too long (7073 > 6798), lowering kernel.perf_event_max_sample_rate to 28250
r8169 0000:09:00.0 enp9s0: Link is Down
r8169 0000:09:00.0 enp9s0: Link is Up - 1Gbps/Full - flow control off
perf: interrupt took too long (8908 > 8841), lowering kernel.perf_event_max_sample_rate to 22250
audit: type=1400 audit(1590249604.807:38): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=21223 comm="cups-browsed" capability=23 capname="sys_nice"
audit: type=1400 audit(1590336023.602:39): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=26009 comm="cups-browsed" capability=23 capname="sys_nice"
rfkill: input handler enabled
rfkill: input handler disabled
rfkill: input handler enabled
rfkill: input handler disabled