dmesg - roci-jetson
Booting Linux on physical CPU 0x0
Linux version 4.9.140-tegra (buildbrain@mobile-u64-3193) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Apr 8 18:15:20 PDT 2020
Boot CPU: AArch64 Processor [4e0f0040]
OF: fdt:memory scan node memory, reg size 48,
OF: fdt: - 80000000 , 2c000000
OF: fdt: - ac200000 , 44600000
OF: fdt: - 100000000 , 780000000
earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '')
bootconsole [tegra_comb_uart0] enabled
Found tegra_fbmem: 00800000@a069c000
Found lut_mem: 00002008@a0697000
OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB
OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem
cma: Reserved 64 MiB at 0x00000000c2000000
On node 0 totalpages: 8322045
DMA zone: 7152 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 457725 pages, LIFO batch:31
Normal zone: 122880 pages used for memmap
Normal zone: 7864320 pages, LIFO batch:31
psci: probing for conduit method from DT.
psci: PSCIv1.0 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.1
percpu: Embedded 25 pages/cpu @ffffffc7ffc4e000 s61656 r8192 d32552 u102400
pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Speculative Store Bypass Disable mitigation not required
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8192013
Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 rootfstype=ext4 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt tegra_fbmem=0x800000@0xa069c000 lut_mem=0x2008@0xa0697000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet
log_buf_len individual max cpu contribution: 32768 bytes
log_buf_len total cpu_extra contributions: 229376 bytes
log_buf_len min size: 32768 bytes
log_buf_len: 262144 bytes
early log buf free: 29172(89%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Memory: 31917120K/33288180K available (15294K kernel code, 2934K rwdata, 6636K rodata, 8576K init, 609K bss, 617396K reserved, 753664K cma-reserved)
Virtual kernel memory layout:
modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
.text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB)
.rodata : 0xffffff8008f70000 - 0xffffff80095f0000 ( 6656 KB)
.init : 0xffffff80095f0000 - 0xffffff8009e50000 ( 8576 KB)
.data : 0xffffff8009e50000 - 0xffffff800a12d808 ( 2935 KB)
.bss : 0xffffff800a12d808 - 0xffffff800a1c5f3c ( 610 KB)
fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
0xffffffbf00000000 - 0xffffffbf20000000 ( 512 MB actual)
memory : 0xffffffc000000000 - 0xffffffc800000000 ( 32768 MB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:64 nr_irqs:64 0
GIC: Using split EOI/Deactivate mode
arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns
sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns
Console: colour dummy device 80x25
console [tty0] enabled
bootconsole [tegra_comb_uart0] disabled
kmemleak: Kernel memory leak detector disabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
ftrace: allocating 47094 entries in 184 pages
sched-energy: Sched-energy-costs installed from DT
ASID allocator initialised with 65536 entries
tegra-id: chipid=21917.
tegra-id: opt_subrevision=0.
Tegra Revision: A02 SKU: 0xd0 CPU Process: 0 SoC Process: 0
DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/galen/kernel-dts/common/tegra194-p2888-0001-p2822-0000-common.dtsi
DTB Build time: Apr 8 2020 18:20:55
CPU1: Booted secondary processor [4e0f0040]
CPU2: Booted secondary processor [4e0f0040]
CPU3: Booted secondary processor [4e0f0040]
CPU4: Booted secondary processor [4e0f0040]
CPU5: Booted secondary processor [4e0f0040]
CPU6: Booted secondary processor [4e0f0040]
CPU7: Booted secondary processor [4e0f0040]
Brought up 8 CPUs
SMP: Total of 8 processors activated.
CPU features: detected feature: Privileged Access Never
CPU features: detected feature: LSE atomic instructions
CPU features: detected feature: User Access Override
CPU features: detected feature: 32-bit EL0 Support
CPU: All CPU(s) started at EL2
alternatives: patching kernel code
devtmpfs: initialized
Initilizing CustomIPI irq domain
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
OS set in device tree is not L4T.
regulator-dummy: no parameters
Initializing plugin-manager
Plugin module not found
Plugin-manager status disabled
NET: Registered protocol family 16
pstore: using zlib compression
console [pstore-1] enabled
pstore: Registered ramoops as persistent store backend
ramoops: attached 0x200000@0xf0600000, ecc: 0/0
cpuidle: using governor menu
bpmp: waiting for handshake
bpmp: handshake completed
bpmp: synchronizing channels
bpmp: channels synchronized
bpmp: mail init ok
t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2
t19x-arm-smmu 12000000.iommu: probing hardware configuration...
t19x-arm-smmu 12000000.iommu: SMMUv2 with:
t19x-arm-smmu 12000000.iommu: stage 1 translation
t19x-arm-smmu 12000000.iommu: stage 2 translation
t19x-arm-smmu 12000000.iommu: nested translation
t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80
t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)!
t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only)
t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA
t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA
vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e54000)
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
Registering BPMP clocks...
tegra_bpmp_clk_init: clock init ok (400 clks)
tegra_powergate_init: DONE
DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/galen/kernel-dts/common/tegra194-p2888-0001-p2822-0000-common.dtsi
DTB Build time: Apr 8 2020 18:20:55
Tegra reboot handler registered.
iommu: Adding device 14180000.pcie to group 0
iommu: Adding device 14100000.pcie to group 1
iommu: Adding device 14140000.pcie to group 2
iommu: Adding device 141a0000.pcie to group 3
iommu: Adding device 2490000.ether_qos to group 4
iommu: Adding device 3100000.serial to group 5
iommu: Adding device 3110000.serial to group 6
iommu: Adding device 3140000.serial to group 7
tegra-pmc c360000.pmc: scratch reg offset dts data not present
tegra-pmc: get_secure_pmc_setting: done secure_pmc=0
tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET
tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1
tegra-pmc: ### PMC reset status reg: 0x2d
tegra-pmc: PMC Prod config success
padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
tegra-pmc c360000.pmc: IO padctrl driver initialized
iommu: Adding device 3460000.sdhci to group 8
iommu: Adding device 3400000.sdhci to group 9
iommu: Adding device 2450000.ufshci to group 10
iommu: Adding device 3210000.spi to group 11
iommu: Adding device c260000.spi to group 12
iommu: Adding device 3160000.i2c to group 13
iommu: Adding device c240000.i2c to group 14
iommu: Adding device 3180000.i2c to group 15
iommu: Adding device 3190000.i2c to group 16
iommu: Adding device 31b0000.i2c to group 17
iommu: Adding device 31c0000.i2c to group 18
iommu: Adding device c250000.i2c to group 19
iommu: Adding device 31e0000.i2c to group 20
iommu: Adding device sound to group 21
iommu: Adding device 3510000.hda to group 22
iommu: Adding device bc00000.rtcpu to group 23
iommu: Adding device 13e10000.host1x to group 24
iommu: Adding device 13e10000.host1x:ctx0 to group 25
iommu: Adding device 13e10000.host1x:ctx1 to group 26
iommu: Adding device 13e10000.host1x:ctx2 to group 27
iommu: Adding device 13e10000.host1x:ctx3 to group 28
iommu: Adding device 13e10000.host1x:ctx4 to group 29
iommu: Adding device 13e10000.host1x:ctx5 to group 30
iommu: Adding device 13e10000.host1x:ctx6 to group 31
iommu: Adding device 13e10000.host1x:ctx7 to group 32
iommu: Adding device 15340000.vic to group 33
iommu: Adding device 15380000.nvjpg to group 34
iommu: Adding device 15500000.tsec to group 35
iommu: Adding device 15100000.tsecb to group 36
iommu: Adding device 15480000.nvdec to group 37
iommu: Adding device 15140000.nvdec1 to group 38
iommu: Adding device 154c0000.nvenc to group 39
iommu: Adding device 15a80000.nvenc1 to group 40
iommu: Adding device 15880000.nvdla0 to group 41
iommu: Adding device 158c0000.nvdla1 to group 42
iommu: Adding device 15200000.nvdisplay to group 43
platform 15200000.nvdisplay: IOVA linear map 0x00000000a069c000(800000)
platform 15200000.nvdisplay: IOVA linear map 0x00000000a0697000(3000)
platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000)
t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client
iommu: Adding device 15210000.nvdisplay to group 44
t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client
iommu: Adding device 15220000.nvdisplay to group 45
t19x-arm-smmu: Adding 15220000.nvdisplay to ISO SMMU client
iommu: Adding device 15c10000.vi to group 46
t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client
iommu: Adding device 14800000.isp to group 47
iommu: Adding device 16000000.pva0 to group 48
iommu: Adding device 16800000.pva1 to group 49
iommu: Adding device 15810000.se to group 50
iommu: Adding device 15820000.se to group 51
iommu: Adding device 15830000.se to group 52
iommu: Adding device 15840000.se to group 53
iommu: Adding device c1a0000.aon to group 54
iommu: Adding device d000000.bpmp to group 55
bpmp: ping status is 0
bpmp d000000.bpmp: firmware tag is 57f8a77779f848bf2ecf21dabee5645f
bpmp d000000.bpmp: probe ok
tegra-reset 0.bpmp_reset: registered 190 resets.
iommu: Adding device smmu_test to group 56
mc: mapped MMIO address: 0xffffff800a590000 -> 0x2c10000
mc: mapped MMIO address: 0xffffff800a5b0000 -> 0x2c20000
mc: mapped MMIO address: 0xffffff800a5d0000 -> 0x2c30000
mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c40000
mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c50000
mc: mapped MMIO address: 0xffffff800b010000 -> 0x2b80000
mc: mapped MMIO address: 0xffffff800b030000 -> 0x2b90000
mc: mapped MMIO address: 0xffffff800b050000 -> 0x2ba0000
mc: mapped MMIO address: 0xffffff800b070000 -> 0x2bb0000
mc: mapped MMIO address: 0xffffff800b090000 -> 0x1700000
mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x1710000
mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1720000
mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1730000
mc: mapped MMIO address: 0xffffff800b110000 -> 0x1740000
mc: mapped MMIO address: 0xffffff800b130000 -> 0x1750000
mc: mapped MMIO address: 0xffffff800b150000 -> 0x1760000
mc: mapped MMIO address: 0xffffff800b170000 -> 0x1770000
mc-err: mcerr ops are set to t19x
iommu: Adding device 2600000.dma to group 57
GPIO line 490 (pcie-reg-enable) hogged as output/high
GPIO line 289 (pcie-reg-enable) hogged as output/high
GPIO line 339 (wifi-enable) hogged as output/high
gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio)
GPIO line 253 (pex-refclk-sel-low) hogged as output/low
gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon)
tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3
tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256
iommu: Adding device 3550000.xudc to group 58
iommu: Adding device 3610000.xhci to group 59
arm64_ras arm64_ras: probed
ras_fhi_enable: FHI 478 enabled on CPU0
ras_fhi_enable: FHI 479 enabled on CPU1
ras_fhi_enable: FHI 480 enabled on CPU2
ras_fhi_enable: FHI 481 enabled on CPU3
ras_fhi_enable: FHI 482 enabled on CPU4
ras_fhi_enable: FHI 483 enabled on CPU5
ras_fhi_enable: FHI 484 enabled on CPU6
ras_fhi_enable: FHI 485 enabled on CPU7
carmel_ras_enable: RAS enabled on cpu0
carmel_ras_enable: RAS enabled on cpu1
carmel_ras_enable: RAS enabled on cpu2
carmel_ras_enable: RAS enabled on cpu3
carmel_ras_enable: RAS enabled on cpu4
carmel_ras_enable: RAS enabled on cpu5
carmel_ras_enable: RAS enabled on cpu6
carmel_ras_enable: RAS enabled on cpu7
carmel_ras carmel_ras: probed
tegra-cbb 2300000.cbb-noc: noc_secure_irq = 487, noc_nonsecure_irq = 486>
tegra-cbb c600000.aon-noc: noc_secure_irq = 489, noc_nonsecure_irq = 488>
tegra-cbb d600000.bpmp-noc: noc_secure_irq = 491, noc_nonsecure_irq = 490>
tegra-cbb be00000.rce-noc: noc_secure_irq = 493, noc_nonsecure_irq = 492>
tegra-cbb b600000.sce-noc: noc_secure_irq = 495, noc_nonsecure_irq = 494>
tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet
vdd-3v3-cvb: 3300 mV
vdd-1v8-cvb: 1800 mV
vdd-1v8-sd: 1800 mV
vdd-epb-1v0: supplied by vdd-3v3-cvb
vdd-epb-1v0: 1000 mV
vdd-sdmmc1-sw: 3300 mV
avdd-cam-2v8: 2800 mV
vdd-sata-1v5: 1500 mV
vdd-1v8-slt: 1800 mV
vdd-3v3-slt: 3300 mV
vdd-fan: 5000 mV
vdd-hdmi-5v0: 5000 mV
vdd_sys_en: 1200 mV
vdd-5v-sata: 5000 mV
vdd-ac-bat: 5000 mV
vdd-5v-sata: supplied by vdd-ac-bat
HugeTLB registered 2 MB page size, pre-allocated 0 pages
eventlib_kernel: keventlib is initialized, test id: 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe
max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1
vdd-1v0: at 1000 mV
vdd-1v8-hs: at 1800 mV
vdd-1v8-ls: at 1800 mV
vdd-1v8-ao: at 1800 mV
vddio-ddr-1v1: at 1100 mV
vdd-rtc: at 800 mV
spmic-ldo1: at 2375 mV
vdd-ao-3v3: at 3300 mV
vddio-emmc-3v3: at 3300 mV
spmic-ldo4: at 1587 mV
vdd-usb-3v3: at 3300 mV
vddio-sdmmc1-3v3: at 3300 mV
vdd-csi-1v2: at 1200 mV
spmic-ldo8: at 1800 mV
GPIO line 246 (gpio_default) hogged as output/high
GPIO line 247 (gpio_default) hogged as output/high
gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio)
max77620 4-003c: max77620 probe successful
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated
tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec
tegra_wdt_t18x 30c0000.watchdog: Registered successfully
trusty trusty: trusty version: Built: 18:08:23 Apr 8 2020
trusty trusty: selected api version: 3 (requested 3)
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
camchar: rtcpu character device driver loaded
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
nvmap_heap_init: nvmap_heap_init: created heap block cache
tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores
dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000
cma: enabled page replacement for spfn=c6000, epfn=f0000
dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful
nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf
nvmap_page_pool_init: Total RAM pages: 8167696
nvmap_page_pool_init: nvmap page pool size: 1020962 pages (3988 MB)
nvmap_background_zero_thread: PP zeroing thread starting.
misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB)
tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels
thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm
thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm
thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm
thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm
thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tboard_tegra
thermal thermal_zone6: Registering thermal zone thermal_zone6 for type Tdiode_tegra
la/ptsa driver initialized.
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5432K
host1x 13e10000.host1x: initialized
hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.988:1): initialized
workingset: timestamp_bits=46 max_order=23 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ntfs: driver 2.1.32 [Flags: R/W].
9p: Installing v9fs 9p2000 file system support
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
io scheduler noop registered
io scheduler cfq registered (default)
gic 2a41000.agic-controller: GIC IRQ controller registered
random: fast init done
iommu: Adding device 2993000.adsp to group 60
iommu: Adding device aconnect@2a41000:adsp_audio to group 61
tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered
tegra-pwm 3280000.pwm: PWM clk can sleep in ops
tegra-pwm c340000.pwm: PWM clk can sleep in ops
tegra-pwm 32c0000.pwm: PWM clk can sleep in ops
tegra-pwm 32f0000.pwm: PWM clk can sleep in ops
tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs
misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=2000000, max_bw=4687500
tsec 15500000.tsec: initialized
tsec 15100000.tsecb: initialized
nvdec 15480000.nvdec: initialized
nvdec 15140000.nvdec1: initialized
falcon 15340000.vic: initialized
falcon 15380000.nvjpg: initialized
falcon 154c0000.nvenc: initialized
falcon 15a80000.nvenc1: initialized
iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56)
iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57)
iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58)
iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59)
iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60)
iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61)
iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62)
iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63)
t194-nvcsi 15a00000.nvcsi: initialized
scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized
scare-pigeon 14b00000.isp-thi: initialized
pva 16000000.pva0: initialized
pva 16800000.pva1: initialized
nvdla 15880000.nvdla0: initialized
nvdla 158c0000.nvdla1: initialized
tegradccommon 15200000.dc_common: host1x channel mapped
tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated
tegradccommon 15200000.dc_common: dma mapping done
tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor2
generic_infoframe_type: 0x87
tegradc 15200000.nvdisplay: DT parsed successfully
tegradc 15200000.nvdisplay: Display dc.ffffff800bca0000 registered with id=0
tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s
tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 1066500000 Hz
tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 358400000 Hz
tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0
tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0
tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937
tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board
tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed
tegradc 15200000.nvdisplay: probed
Console: switching to colour frame buffer device 240x67
tegradc 15200000.nvdisplay: fb registered
gpio tegra-gpio wake71 for gpio=98(M:2)
tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd
tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd
Parent Clock set for DC plld3
tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m
tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL.
tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL.
extcon-disp-state external-connection:disp-state: cable 48 state 1
Extcon AUX2(HDMI) enable
Could not get extcon-dev /host1x/nvdisplay@15210000:typec0(0)
Could not get extcon-dev /host1x/nvdisplay@15220000:typec1(1)
tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=85
tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0.
tegra_cec 3960000.tegra_cec: Enable clock result: 0.
tegra_cec 3960000.tegra_cec: tegra_cec_init started
tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0
tegra_cec 3960000.tegra_cec: probed
tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels
tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled
tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized
kfuse 3830000.kfuse: initialized
console [ttyTCU0] enabled
[drm] Initialized
brd: module loaded
loop: module loaded
tegra_profiler: version: 1.141, samples/io: 48/28
tegra_profiler: auth: init
nct1008_nct72 4-004c: starting parse dt
nct1008_nct72 4-004c: !!!Found deprecated property!!!
nct1008_nct72 4-004c: success parsing dt
nct1008_nct72 4-004c: success in enabling tmp451 VDD rail
THERMAL EST: found 3 subdevs
THERMAL EST num_resources: 0
[THERMAL EST subdev 0]
[THERMAL EST subdev 1]
[THERMAL EST subdev 2]
THERMAL EST: Found 2 profiles, default profile is quiet
thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est
THERMAL EST: thz register success.
THERMAL EST: end of probe, return err: 0
ufs_tegra 2450000.ufshci: freq-table-hz property not specified
ufs_tegra 2450000.ufshci: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
ufs_tegra 2450000.ufshci: wakeup init done, cdirq 460
gpio tegra-gpio-aon wake25 for gpio=32(EE:0)
sd: No Scsi addr parsed to reserve index
hisi_sas: driver version v1.6
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
Copyright(c) 1999 - 2017 Intel Corporation.
eqos 2490000.ether_qos: Setting local MAC: 0 4 4b e5 89 17
libphy: dwc_phy: probed
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driver r8152
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
VFIO - User Level meta-driver version: 0.3
nct1008_nct72 4-004c: LOC shutdown limit 107
nct1008_nct72 4-004c: EXT shutdown limit 109
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP
tegra-xusb 3610000.xhci: USB3 port 2 has OTG_CAP
Could not get extcon-dev /xhci@3610000:id(0)
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled
Could not get extcon-dev /xudc@3550000:vbus(0)
ucsi_ccg 1-0008: FW1 Version: gn v12.05, [Base 3.1.2.1487]
ucsi_ccg 1-0008: FW2 Version: gn v12.05, [Base 3.1.2.1487]
ucsi_ccg 1-0008: fw_mode: 2
ucsi_ccg 1-0008: fw1_invalid: 0
ucsi_ccg 1-0008: fw2_invalid: 0
ucsi_ccg 1-0008: silicon_id: 0x1f00
ucsi_ccg 1-0008: typec-port0 extcon dev created
ucsi_ccg 1-0008: typec-port1 extcon dev created
ucsi_ccg 1-0008: typec-pd extcon dev created
gpio tegra-gpio-aon wake48 for gpio=10(BB:2)
ucsi_ccg 1-0008: [typec-port0] Cable state:1, cable id:2
ucsi_ccg 1-0008: [typec-port1] Cable state:1, cable id:2
ucsi_ccg 1-0008: HPI Command Success.
ucsi_ccg 1-0008: HPI Command Success.
ucsi_ccg 1-0008: ucsi_ccg_init: complete
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver xpad
nct1008_nct72 4-004c: initial LOC temp: 21000
nct1008_nct72 4-004c: initial EXT temp: 24500
nct1008_nct72 4-004c: hi_b:-10, lo_b:128
nct1008_nct72 4-004c: nct1008_probe: initialized
tegradc 15200000.nvdisplay: blank - powerdown
extcon-disp-state external-connection:disp-state: cable 48 state 0
Extcon AUX2(HDMI) disable
tegra_nvdisp_handle_pd_disable: Powergated Head1 pd
tegra_nvdisp_handle_pd_disable: Powergated Head0 pd
tegradc 15200000.nvdisplay: unblank
tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd
tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd
max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
Wake73 for irq=42
Parent Clock set for DC plld3
rtc rtc1: alarm rtc device
tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1
tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock
i2c /dev entries driver
max77620-power max20024-power: Event recorder REG_NVERC : 0x0
tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m
tegradc 15200000.nvdisplay: hdmi: get RGB quant from EDID.
tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID.
tegra-thermal-throttle bthrot_cdev: clk:cpu max:2265600000, min:115200000 steps:28
tegra-thermal-throttle bthrot_cdev: clk:gpu max:1377000000, min:114750000 steps:13
tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200
tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400
tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:56 cutoff:0
tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400
tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400
tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:52 cutoff:1
tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200
tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300
tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:56 cutoff:0
tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10
tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10
tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0
tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400
tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400
tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:52 cutoff:1
FAN dev name: pwm-fan
FAN:gpio request success.
FAN: can't find tach_gpio
pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet
pwm_fan_driver pwm-fan: cap state:4, cap pwm:255
pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal
pwm_fan_driver pwm-fan: tach period: 1000
pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
pwm_fan_driver pwm-fan: index 1: pwm=77, rpm=1000, rru=2, rrd=2, state:2
pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
tegra194_cpufreq_probe: platform driver Initialization: pass
cpuidle: Initializing cpuidle driver
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-tegra 3460000.sdhci: Client registration for eMC Successful
CMDQ: cmdq_platfm_init successful
sdhci-tegra 3400000.sdhci: Got CD GPIO
sdhci-tegra 3400000.sdhci: Client registration for eMC Successful
sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 255
extcon-disp-state external-connection:disp-state: cable 48 state 1
Extcon AUX2(HDMI) enable
tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete
tegra-se-nvhost 15810000.se: initialized
tegra-se-nvhost 15810000.se: tegra_se_probe: complete
tegra-se-nvhost 15820000.se: initialized
tegra-se-nvhost 15820000.se: tegra_se_probe: complete
tegra-se-nvhost 15830000.se: initialized
tegra-se-nvhost 15830000.se: tegra_se_probe: complete
tegra-se-nvhost 15840000.se: initialized
tegra-se-nvhost 15840000.se: tegra_se_probe: complete
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed
tegra_aon c1a0000.aon: tegra aon driver probe OK
tegra186-aondbg aondbg: aondbg driver probe() OK
denver_knobs_init:MTS_VERSION:48073932
tegra19x_actmon d230000.actmon: in actmon_register()...
tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all
t19x_cache tegra-cache: probed
misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304
misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB)
carmel-pmu-drv carmel-pmu: Registered Carmel PMU
mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr
gpio tegra-gpio wake8 for gpio=55(G:7)
mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr
nvpmodel: initialized successfully
trusty-virtio trusty:virtio: initializing
trusty_ipc virtio0: vring0: va(pa) ffffffc7c7936000(0) qsz 32 notifyid 1
trusty_ipc virtio0: vring1: va(pa) ffffffc7c793c000(0) qsz 32 notifyid 2
trusty-virtio trusty:virtio: initializing done
trusty_ipc virtio0: is online
tegra-hda 3510000.hda: Override SDO lines to 4
usbcore: registered new interface driver snd-usb-audio
input: tegra-hda-galen-t194 HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0
input: tegra-hda-galen-t194 HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1
input: tegra-hda-galen-t194 HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2
input: tegra-hda-galen-t194 HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3
mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1
mmc0: periodic cache flush enabled
mmc0: new HS400 Enhanced strobe MMC card at address 0001
mmcblk0: mmc0:0001 HBG4a2 29.1 GiB
mmcblk0boot0: mmc0:0001 HBG4a2 partition 1 8.00 MiB
mmcblk0boot1: mmc0:0001 HBG4a2 partition 2 8.00 MiB
mmcblk0rpmb: mmc0:0001 HBG4a2 partition 3 4.00 MiB
mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42
tegra_cec 3960000.tegra_cec: physical address: 10:00.
tegra_cec 3960000.tegra_cec: Sent res: -113.
tegra_cec 3960000.tegra_cec: tegra_cec_init Done.
gpio tegra-gpio wake12 for gpio=149(S:5)
OPE platform probe
OPE platform probe successful
extcon-disp-state external-connection:disp-state: cable 51 state 1
Extcon HDMI: HPD enabled
tegradc 15200000.nvdisplay: hdmi: plugged
tegra-asoc: sound: ADMAIF1 ADMAIF1 mapping ok
tegra-asoc: sound: ADMAIF2 ADMAIF2 mapping ok
tegra-asoc: sound: ADMAIF3 ADMAIF3 mapping ok
tegra-asoc: sound: ADMAIF4 ADMAIF4 mapping ok
tegra-asoc: sound: ADMAIF5 ADMAIF5 mapping ok
tegra-asoc: sound: ADMAIF6 ADMAIF6 mapping ok
tegra-asoc: sound: ADMAIF7 ADMAIF7 mapping ok
tegra-asoc: sound: ADMAIF8 ADMAIF8 mapping ok
tegra-asoc: sound: ADMAIF9 ADMAIF9 mapping ok
tegra-asoc: sound: ADMAIF10 ADMAIF10 mapping ok
tegra-asoc: sound: ADMAIF11 ADMAIF11 mapping ok
tegra-asoc: sound: ADMAIF12 ADMAIF12 mapping ok
tegra-asoc: sound: ADMAIF13 ADMAIF13 mapping ok
tegra-asoc: sound: ADMAIF14 ADMAIF14 mapping ok
tegra-asoc: sound: ADMAIF15 ADMAIF15 mapping ok
tegra-asoc: sound: ADMAIF16 ADMAIF16 mapping ok
tegra-asoc: sound: ADMAIF17 ADMAIF17 mapping ok
tegra-asoc: sound: ADMAIF18 ADMAIF18 mapping ok
tegra-asoc: sound: ADMAIF19 ADMAIF19 mapping ok
tegra-asoc: sound: ADMAIF20 ADMAIF20 mapping ok
input: tegra-snd-t19x-mobile-rt565x Headset Jack as /devices/sound/sound/card1/input4
u32 classifier
Actions configured
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
9pnet: Installing 9P2000 support
Key type dns_resolver registered
Registered cp15_barrier emulation handler
Registered setend emulation handler
registered taskstats version 1
tegra-pcie-dw 14180000.pcie: Setting init speed to max speed
OF: PCI: host bridge /pcie@14180000 ranges:
OF: PCI: IO 0x38100000..0x381fffff -> 0x38100000
OF: PCI: MEM 0x1b40000000..0x1bffffffff -> 0x40000000
OF: PCI: MEM 0x1800000000..0x1b3fffffff -> 0x1800000000
tegra-pcie-dw 14180000.pcie: link is up
tegra-pcie-dw 14180000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x38100000-0x381fffff])
pci_bus 0000:00: root bus resource [mem 0x1b40000000-0x1bffffffff] (bus address [0x40000000-0xffffffff])
pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1b3fffffff pref]
pci 0000:00:00.0: [10de:1ad0] type 01 class 0x060400
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:00:00.0 to group 62
pci 0000:01:00.0: [126f:2263] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
iommu: Adding device 0000:01:00.0 to group 63
pci 0000:00:00.0: BAR 14: assigned [mem 0x1b40000000-0x1b400fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x1b40000000-0x1b40003fff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
pci 0000:00:00.0: bridge window [mem 0x1b40000000-0x1b400fffff]
pci 0000:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512
pci 0000:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512
pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:00.0:pcie001: service driver pcie_pme loaded
aer 0000:00:00.0:pcie002: service driver aer loaded
nvme nvme0: pci function 0000:01:00.0
nvme 0000:01:00.0: enabling device (0000 -> 0002)
tegra-pcie-dw 14100000.pcie: Setting init speed to max speed
OF: PCI: host bridge /pcie@14100000 ranges:
OF: PCI: IO 0x30100000..0x301fffff -> 0x30100000
OF: PCI: MEM 0x1230000000..0x123fffffff -> 0x40000000
OF: PCI: MEM 0x1200000000..0x122fffffff -> 0x1200000000
tegra-pcie-dw 14100000.pcie: link is up
tegra-pcie-dw 14100000.pcie: PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [bus 00-ff]
pci_bus 0001:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x30100000-0x301fffff])
pci_bus 0001:00: root bus resource [mem 0x1230000000-0x123fffffff] (bus address [0x40000000-0x4fffffff])
pci_bus 0001:00: root bus resource [mem 0x1200000000-0x122fffffff pref]
pci 0001:00:00.0: [10de:1ad2] type 01 class 0x060400
pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0001:00:00.0 to group 64
pci 0001:01:00.0: [1b4b:9171] type 00 class 0x010601
pci 0001:01:00.0: reg 0x10: [io 0x8000-0x8007]
pci 0001:01:00.0: reg 0x14: [io 0x8040-0x8043]
pci 0001:01:00.0: reg 0x18: [io 0x8100-0x8107]
pci 0001:01:00.0: reg 0x1c: [io 0x8140-0x8143]
pci 0001:01:00.0: reg 0x20: [io 0x800000-0x80000f]
pci 0001:01:00.0: reg 0x24: [mem 0x00900000-0x009001ff]
pci 0001:01:00.0: reg 0x30: [mem 0xd0000000-0xd000ffff pref]
pci 0001:01:00.0: PME# supported from D3hot
iommu: Adding device 0001:01:00.0 to group 65
pci 0001:00:00.0: BAR 14: assigned [mem 0x1230000000-0x12300fffff]
pci 0001:00:00.0: BAR 13: assigned [io 0x100000-0x100fff]
pci 0001:01:00.0: BAR 6: assigned [mem 0x1230000000-0x123000ffff pref]
pci 0001:01:00.0: BAR 5: assigned [mem 0x1230010000-0x12300101ff]
pci 0001:01:00.0: BAR 4: assigned [io 0x100000-0x10000f]
pci 0001:01:00.0: BAR 0: assigned [io 0x100010-0x100017]
pci 0001:01:00.0: BAR 2: assigned [io 0x100018-0x10001f]
pci 0001:01:00.0: BAR 1: assigned [io 0x100020-0x100023]
pci 0001:01:00.0: BAR 3: assigned [io 0x100024-0x100027]
pci 0001:00:00.0: PCI bridge to [bus 01-ff]
pci 0001:00:00.0: bridge window [io 0x100000-0x100fff]
pci 0001:00:00.0: bridge window [mem 0x1230000000-0x12300fffff]
pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
pci 0001:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
pcieport 0001:00:00.0: Signaling PME through PCIe PME interrupt
pci 0001:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0001:00:00.0:pcie001: service driver pcie_pme loaded
aer 0001:00:00.0:pcie002: service driver aer loaded
ahci 0001:01:00.0: version 3.0
ahci 0001:01:00.0: AHCI 0001.0000 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0001:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi host1: ahci
ata1: SATA max UDMA/133 abar m512@0x1230010000 port 0x1230010100 irq 820
tegra-pcie-dw 14140000.pcie: Setting init speed to max speed
OF: PCI: host bridge /pcie@14140000 ranges:
OF: PCI: IO 0x34100000..0x341fffff -> 0x34100000
OF: PCI: MEM 0x12b0000000..0x12bfffffff -> 0x40000000
OF: PCI: MEM 0x1280000000..0x12afffffff -> 0x1280000000
nvme0n1: p1 p2
ata1: SATA link down (SStatus 0 SControl 300)
tegra-pcie-dw 14140000.pcie: link is down
tegra-pcie-dw 14140000.pcie: PCI host bridge to bus 0003:00
pci_bus 0003:00: root bus resource [bus 00-ff]
pci_bus 0003:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x34100000-0x341fffff])
pci_bus 0003:00: root bus resource [mem 0x12b0000000-0x12bfffffff] (bus address [0x40000000-0x4fffffff])
pci_bus 0003:00: root bus resource [mem 0x1280000000-0x12afffffff pref]
pci 0003:00:00.0: [10de:1ad2] type 01 class 0x060400
pci 0003:00:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0003:00:00.0 to group 66
pci 0003:00:00.0: PCI bridge to [bus 01-ff]
pci 0003:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
pcieport 0003:00:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0003:00:00.0:pcie001: service driver pcie_pme loaded
aer 0003:00:00.0:pcie002: service driver aer loaded
pcie_pme 0003:00:00.0:pcie001: unloading service driver pcie_pme
aer 0003:00:00.0:pcie002: unloading service driver aer
pci_bus 0003:01: busn_res: [bus 01-ff] is released
iommu: Removing device 0003:00:00.0 from group 66
pci_bus 0003:00: busn_res: [bus 00-ff] is released
tegra-pcie-dw 14140000.pcie: PCIe link is not up...!
tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed
OF: PCI: host bridge /pcie@141a0000 ranges:
OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000
OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000
OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000
tegra-pcie-dw 141a0000.pcie: link is down
tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00
pci_bus 0005:00: root bus resource [bus 00-ff]
pci_bus 0005:00: root bus resource [io 0x300000-0x3fffff] (bus address [0x3a100000-0x3a1fffff])
pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff])
pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref]
pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400
pci 0005:00:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0005:00:00.0 to group 66
pci 0005:00:00.0: PCI bridge to [bus 01-ff]
pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded
aer 0005:00:00.0:pcie002: service driver aer loaded
pcie_pme 0005:00:00.0:pcie001: unloading service driver pcie_pme
aer 0005:00:00.0:pcie002: unloading service driver aer
pci_bus 0005:01: busn_res: [bus 01-ff] is released
iommu: Removing device 0005:00:00.0 from group 66
pci_bus 0005:00: busn_res: [bus 00-ff] is released
tegra-pcie-dw 141a0000.pcie: PCIe link is not up...!
tegra-cbb 14040000.cv-noc: noc_secure_irq = 99, noc_nonsecure_irq = 98>
tegra194-isp5 14800000.isp: initialized
tegra194-vi5 15c10000.vi: using default number of vi channels, 36
tegra194-vi5 15c10000.vi: initialized
tegra194-vi5 15c10000.vi: ep of_device is not enabled /host1x/vi@15c10000/ports/port@0/endpoint.
tegra194-vi5 15c10000.vi: ep of_device is not enabled /host1x/vi@15c10000/ports/port@1/endpoint.
tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor
tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node
tegradc 15210000.nvdisplay: DT parsed successfully
tegradc 15210000.nvdisplay: Display dc.ffffff800fcd0000 registered with id=1
tegradc 15210000.nvdisplay: vblank syncpt # 15 for dc 1
tegradc 15210000.nvdisplay: vpulse3 syncpt # 16 for dc 1
tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP
tegra-xusb 3610000.xhci: USB3 port 2 has OTG_CAP
tegra-xusb 3610000.xhci: extcon 0: ffffffc7c7e22000 id
tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled
tegra-xudc-new 3550000.xudc: device count: 1
tegra-xudc-new 3550000.xudc: vbus state: 0
tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work
tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000
tegra-xusb 3610000.xhci: Firmware timestamp: 2019-07-24 05:47:34 UTC, Version: 60.06 release
tegra-xusb 3610000.xhci: xHCI Host Controller
tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1
tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810
tegra-xusb 3610000.xhci: irq 473, io mem 0x03610000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd
usb usb1: SerialNumber: 3610000.xhci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
tegra-xusb 3610000.xhci: xHCI Host Controller
tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2
tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd
usb usb2: SerialNumber: 3610000.xhci
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
tegra-xudc-new 3550000.xudc: entering ELPG
tegradc 15210000.nvdisplay: probed
tegra-xudc-new 3550000.xudc: entering ELPG done
tegradc 15210000.nvdisplay: fb registered
hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
tegradc 15210000.nvdisplay: blank - powerdown
extcon-disp-state external-connection:disp-state: cable 44 state 0 already set.
Extcon DP: HPD disabled
hpd: hpd_switch 0
hpd: switching from state 0 (Reset) to state 1 (Check Plug)
hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
tegradc 15220000.nvdisplay: disp2 connected to head2->/host1x/sor1
tegradc 15220000.nvdisplay: parse_dp_settings: No dp-lt-settings node
tegradc 15220000.nvdisplay: DT parsed successfully
tegradc 15220000.nvdisplay: Display dc.ffffff800ff50000 registered with id=2
tegradc 15220000.nvdisplay: vblank syncpt # 17 for dc 2
tegradc 15220000.nvdisplay: vpulse3 syncpt # 18 for dc 2
tegradc 15220000.nvdisplay: probed
tegradc 15220000.nvdisplay: fb registered
hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
tegradc 15220000.nvdisplay: blank - powerdown
extcon-disp-state external-connection:disp-state: cable 44 state 0 already set.
Extcon DP: HPD disabled
hpd: hpd_switch 0
hpd: switching from state 0 (Reset) to state 1 (Check Plug)
hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072
tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900
tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00
tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00
tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00
tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000
tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (71)
tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful
tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=cf2bef3ad10e437272857b76308abef8ffb80bda
gpio tegra-gpio wake67 for gpio=48(G:0)
gpio tegra-gpio-aon wake29 for gpio=36(EE:4)
input: gpio-keys as /devices/gpio-keys/input/input5
tegra_rtc c2a0000.rtc: setting system clock to 2020-05-14 16:04:44 UTC (1589472284)
mmcblk mmc0:0001: Card claimed for testing.
bpmp: mounted debugfs mirror
vdd-1v8-cvb: disabling
vdd-1v8-sd: disabling
vdd-epb-1v0: disabling
avdd-cam-2v8: disabling
vdd-sata-1v5: disabling
vdd-3v3-slt: disabling
vdd-fan: disabling
vdd_sys_en: disabling
ALSA device list:
#0: tegra-hda-galen-t194 at 0x3518000 irq 70
#1: tegra-snd-t19x-mobile-rt565x
Freeing unused kernel memory: 8576K
Root device found: mmcblk0p1
Found dev node: /dev/mmcblk0p1
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
Rootfs mounted over mmcblk0p1
Switching from initrd to actual rootfs
usb 1-2: new high-speed USB device number 2 using tegra-xusb
ip_tables: (C) 2000-2006 Netfilter Core Team
cgroup: cgroup2: unknown option "nsdelegate"
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture arm64.
usb 1-2: New USB device found, idVendor=0bda, idProduct=2838
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: RTL2838UHIDIR
usb 1-2: Manufacturer: Realtek
usb 1-2: SerialNumber: 00000001
systemd[1]: Set hostname to .
systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Swap.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice User and Session Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
gpio tegra-gpio wake44 for gpio=192(Y:0)
EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000
systemd-journald[2438]: Received request to flush runtime journal from PID 1
using random self ethernet address
using random host ethernet address
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
Mass Storage Function, version: 2009/09/11
LUN: removable file: (no medium)
using random self ethernet address
using random host ethernet address
rndis0: HOST MAC a2:42:f8:dc:44:10
rndis0: MAC a2:42:f8:dc:44:11
usb0: HOST MAC a2:42:f8:dc:44:12
usb0: MAC a2:42:f8:dc:44:13
tegra-xudc-new 3550000.xudc: exiting ELPG
tegra-xudc-new 3550000.xudc: exiting ELPG done
tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled
tegra-xudc-new 3550000.xudc: entering ELPG
tegra-xudc-new 3550000.xudc: entering ELPG done
tegra-xudc-new 3550000.xudc: exiting ELPG
tegra-xudc-new 3550000.xudc: exiting ELPG done
tegra-xudc-new 3550000.xudc: entering ELPG
tegra-xudc-new 3550000.xudc: entering ELPG done
l4tbr0: port 1(rndis0) entered blocking state
l4tbr0: port 1(rndis0) entered disabled state
device rndis0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
l4tbr0: port 2(usb0) entered blocking state
l4tbr0: port 2(usb0) entered disabled state
device usb0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
gpio tegra-gpio wake20 for gpio=52(G:4)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Wake76 for irq=199
Wake77 for irq=199
Wake78 for irq=199
Wake79 for irq=199
Wake80 for irq=199
Wake81 for irq=199
Wake82 for irq=199
tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0
tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0
usb usb2: usb_suspend_both: status 0
zram: Added device: zram0
zram: Added device: zram1
zram: Added device: zram2
zram: Added device: zram3
zram: Added device: zram4
zram: Added device: zram5
zram: Added device: zram6
zram: Added device: zram7
zram0: detected capacity change from 0 to 2091827200
Adding 2042796k swap on /dev/zram0. Priority:5 extents:1 across:2042796k SS
zram1: detected capacity change from 0 to 2091827200
Adding 2042796k swap on /dev/zram1. Priority:5 extents:1 across:2042796k SS
zram2: detected capacity change from 0 to 2091827200
Adding 2042796k swap on /dev/zram2. Priority:5 extents:1 across:2042796k SS
zram3: detected capacity change from 0 to 2091827200
Adding 2042796k swap on /dev/zram3. Priority:5 extents:1 across:2042796k SS
zram4: detected capacity change from 0 to 2091827200
Adding 2042796k swap on /dev/zram4. Priority:5 extents:1 across:2042796k SS
zram5: detected capacity change from 0 to 2091827200
Adding 2042796k swap on /dev/zram5. Priority:5 extents:1 across:2042796k SS
zram6: detected capacity change from 0 to 2091827200
Adding 2042796k swap on /dev/zram6. Priority:5 extents:1 across:2042796k SS
zram7: detected capacity change from 0 to 2091827200
Adding 2042796k swap on /dev/zram7. Priority:5 extents:1 across:2042796k SS
tegradc 15200000.nvdisplay: blank - powerdown
extcon-disp-state external-connection:disp-state: cable 48 state 0
Extcon AUX2(HDMI) disable
tegra_nvdisp_handle_pd_disable: Powergated Head1 pd
tegra_nvdisp_handle_pd_disable: Powergated Head0 pd
tegradc 15200000.nvdisplay: unblank
tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd
tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd
Parent Clock set for DC plld3
tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m
tegradc 15200000.nvdisplay: hdmi: get RGB quant from EDID.
tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID.
extcon-disp-state external-connection:disp-state: cable 48 state 1
Extcon AUX2(HDMI) enable
tegradc 15200000.nvdisplay: unblank
tegradc 15210000.nvdisplay: blank - powerdown
tegradc 15220000.nvdisplay: blank - powerdown
eqos 2490000.ether_qos eth0: Link is Up - 100Mbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tegradc 15200000.nvdisplay: blank - powerdown
extcon-disp-state external-connection:disp-state: cable 48 state 0
Extcon AUX2(HDMI) disable
tegra_nvdisp_handle_pd_disable: Powergated Head1 pd
tegra_nvdisp_handle_pd_disable: Powergated Head0 pd