dmesg - diskpart991
Linux version 4.19.0-6-686-pae (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11)
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000099bff] usable
BIOS-e820: [mem 0x0000000000099c00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000784bdfff] usable
BIOS-e820: [mem 0x00000000784be000-0x0000000079037fff] reserved
BIOS-e820: [mem 0x0000000079038000-0x000000007920cfff] usable
BIOS-e820: [mem 0x000000007920d000-0x0000000079a6cfff] ACPI NVS
BIOS-e820: [mem 0x0000000079a6d000-0x000000007bd78fff] reserved
BIOS-e820: [mem 0x000000007bd79000-0x000000007bd79fff] usable
BIOS-e820: [mem 0x000000007bd7a000-0x000000007bdfffff] reserved
BIOS-e820: [mem 0x000000007be00000-0x000000007bffffff] usable
BIOS-e820: [mem 0x000000007c000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0.0 present.
DMI: MEN Mikro Elektronik GmbH G25A/n/a, BIOS 1.02 05/03/2017
tsc: Fast TSC calibration using PIT
tsc: Detected 1496.383 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x280000 max_arch_pfn = 0x1000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 380000000000 mask 3FC000000000 uncachable
2 base 0000FB000000 mask 3FFFFF800000 write-through
3 base 0000FB700000 mask 3FFFFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
found SMP MP-table at [mem 0x000fcca0-0x000fccaf]
initial memory mapped: [mem 0x00000000-0x0affffff]
BRK [0x0ab0e000, 0x0ab0efff] PGTABLE
BRK [0x0ab0f000, 0x0ab10fff] PGTABLE
BRK [0x0ab11000, 0x0ab11fff] PGTABLE
BRK [0x0ab12000, 0x0ab12fff] PGTABLE
RAMDISK: [mem 0x356ad000-0x36b4dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000796150A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000007962E810 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000796151F0 019619 (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 0x0000000079A53F80 000040
ACPI: APIC 0x000000007962E920 0000DC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000007962EA00 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000007962EA48 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000007962EAE8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: UEFI 0x000000007962EB28 000042 (v01 00000000 00000000)
ACPI: DBG2 0x000000007962EB70 000072 (v00 ALASKA A M I 00000000 INTL 20091013)
ACPI: HPET 0x000000007962EBE8 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 0x000000007962EC20 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SLIT 0x000000007962ECB0 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x000000007962ECE0 001158 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0x000000007962FE38 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0x000000007962FE78 00EBA3 (v01 AMI PmMgt 00000001 INTL 20120913)
ACPI: SPCR 0x000000007963EA20 000050 (v02 A M I APTIO V 01072009 AMI. 0005000B)
ACPI: TPM2 0x000000007963EA70 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
ACPI: SSDT 0x000000007963EAA8 0020CB (v02 ALASKA SpsNm 00000002 INTL 20120913)
ACPI: SSDT 0x0000000079640B78 000064 (v02 ALASKA SpsNvs 00000002 INTL 20120913)
ACPI: PRAD 0x0000000079640BE0 000102 (v02 ALASKA A M I 00000002 INTL 20120913)
ACPI: DMAR 0x0000000079640CE8 0000CC (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: Local APIC address 0xfee00000
9360MB HIGHMEM available.
879MB LOWMEM available.
mapped low ram: 0 - 36ffe000
low ram: 0 - 36ffe000
BRK [0x0ab13000, 0x0ab13fff] PGTABLE
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
Normal [mem 0x0000000001000000-0x0000000036ffdfff]
HighMem [mem 0x0000000036ffe000-0x000000027fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000098fff]
node 0: [mem 0x0000000000100000-0x00000000784bdfff]
node 0: [mem 0x0000000079038000-0x000000007920cfff]
node 0: [mem 0x000000007bd79000-0x000000007bd79fff]
node 0: [mem 0x000000007be00000-0x000000007bffffff]
node 0: [mem 0x0000000100000000-0x000000027fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
On node 0 totalpages: 2066476
DMA zone: 40 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3992 pages, LIFO batch:0
Normal zone: 2160 pages used for memmap
Normal zone: 221182 pages, LIFO batch:63
HighMem zone: 1841302 pages, LIFO batch:63
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 3 global_irq 3 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 4 global_irq 4 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ3 used by override.
ACPI: IRQ4 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
ACPI: SPCR: console: uart,io,0x3f8,115200
[Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x700000e (or later)
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
random: get_random_bytes called from start_kernel+0x81/0x45f with crng_init=0
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 30 pages/cpu s90572 r0 d32308 u122880
pcpu-alloc: s90572 r0 d32308 u122880 alloc=30*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists, mobility grouping on. Total pages: 2064276
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00036ffe:00280000)
Initializing Movable for node 0 (00000000:00000000)
Memory: 8063264K/8265904K available (6777K kernel code, 660K rwdata, 2084K rodata, 892K init, 452K bss, 202640K reserved, 0K cma-reserved, 7365208K highmem)
virtual kernel memory layout:
fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
cpu_entry : 0xff400000 - 0xff8e1000 (4996 kB)
pkmap : 0xff000000 - 0xff200000 (2048 kB)
vmalloc : 0xf77fe000 - 0xfeffe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf6ffe000 ( 879 MB)
.init : 0xca95f000 - 0xcaa3e000 ( 892 kB)
.data : 0xca69e788 - 0xca94f3c0 (2755 kB)
.text : 0xca000000 - 0xca69e788 (6777 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
************************************************************
** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
** **
** You are using 32-bit PTI on a 64-bit PCID-capable CPU. **
** Your performance will increase dramatically if you **
** switch to a 64-bit kernel! **
** **
** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
************************************************************
ftrace: allocating 29743 entries in 59 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 2304, nr_irqs: 896, preallocated irqs: 16
CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
Console: colour dummy device 80x25
console [ttyS0] enabled
ACPI: Core revision 20180810
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
Enabling APIC mode: Flat. Using 2 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1591c9c6a2b, max_idle_ns: 440795206901 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.76 BogoMIPS (lpj=5985532)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor initialized
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Vulnerable
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
TAA: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 24K
smpboot: CPU0: Intel(R) Pentium(R) CPU D1519 @ 1.50GHz (family: 0x6, model: 0x56, stepping: 0x3)
Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
random: crng done (trusting CPU's manufacturer)
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
CPU 1 irqstacks, hard=599b9024 soft=037f9911
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Initializing CPU#1
CPU 2 irqstacks, hard=326851ab soft=b7d17339
#2
Initializing CPU#2
CPU 3 irqstacks, hard=17a8d59e soft=78c4cda5
#3
Initializing CPU#3
CPU 4 irqstacks, hard=31a491cb soft=50b5acf6
#4
Initializing CPU#4
MDS CPU bug present and SMT on, data leak possible. See for more details.
TAA CPU bug present and SMT on, data leak possible. See for more details.
CPU 5 irqstacks, hard=72fd56ce soft=b566e1f5
#5
Initializing CPU#5
CPU 6 irqstacks, hard=73ccfb47 soft=04a3ba77
#6
Initializing CPU#6
CPU 7 irqstacks, hard=83fe6740 soft=1d76be68
#7
Initializing CPU#7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (23942.12 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7920d000-0x79a6cfff] (8781824 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(947718109.032:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: platform does not support [SHPCHotplug LTR]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
pci_bus 0000:ff: on NUMA node 0
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfbf38000-0xfbf38fff]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfbf20000-0xfbf2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbf37000-0xfbf3700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfbf36000-0xfbf3600f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfbf00000-0xfbf1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfbf34000-0xfbf34fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbf33000-0xfbf333ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbf32000-0xfbf327ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbf31000-0xfbf310ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
acpiphp: Slot [2] registered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000
pci 0000:03:00.0: reg 0x10: [mem 0xfbe06000-0xfbe07fff 64bit]
pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000
pci 0000:03:00.1: reg 0x10: [mem 0xfbe04000-0xfbe05fff 64bit]
pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000
pci 0000:03:00.2: reg 0x10: [mem 0xfbe02000-0xfbe03fff 64bit]
pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000
pci 0000:03:00.3: reg 0x10: [mem 0xfbe00000-0xfbe01fff 64bit]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:04:00.0: [8086:15ad] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xfb200000-0xfb3fffff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xfb404000-0xfb407fff 64bit pref]
pci 0000:04:00.0: reg 0x30: [mem 0xfb880000-0xfb8fffff pref]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: reg 0x184: [mem 0xfbc00000-0xfbc03fff 64bit]
pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfbc00000-0xfbcfffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:04:00.0: reg 0x190: [mem 0xfbb00000-0xfbb03fff 64bit]
pci 0000:04:00.0: VF(n) BAR3 space: [mem 0xfbb00000-0xfbbfffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:04:00.1: [8086:15ad] type 00 class 0x020000
pci 0000:04:00.1: reg 0x10: [mem 0xfb000000-0xfb1fffff 64bit pref]
pci 0000:04:00.1: reg 0x20: [mem 0xfb400000-0xfb403fff 64bit pref]
pci 0000:04:00.1: reg 0x30: [mem 0xfb800000-0xfb87ffff pref]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: reg 0x184: [mem 0xfba00000-0xfba03fff 64bit]
pci 0000:04:00.1: VF(n) BAR0 space: [mem 0xfba00000-0xfbafffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:04:00.1: reg 0x190: [mem 0xfb900000-0xfb903fff 64bit]
pci 0000:04:00.1: VF(n) BAR3 space: [mem 0xfb900000-0xfb9fffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:00:02.2: PCI bridge to [bus 04-05]
pci 0000:00:02.2: bridge window [mem 0xfb800000-0xfbcfffff]
pci 0000:00:02.2: bridge window [mem 0xfb000000-0xfb4fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 06]
pci 0000:00:03.2: PCI bridge to [bus 07]
pci 0000:08:00.0: [8086:1521] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [mem 0xfbd60000-0xfbd7ffff]
pci 0000:08:00.0: reg 0x18: [io 0xe060-0xe07f]
pci 0000:08:00.0: reg 0x1c: [mem 0xfbd8c000-0xfbd8ffff]
pci 0000:08:00.0: PME# supported from D0 D3hot
pci 0000:08:00.0: reg 0x184: [mem 0xfb6e0000-0xfb6e3fff 64bit pref]
pci 0000:08:00.0: VF(n) BAR0 space: [mem 0xfb6e0000-0xfb6fffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:08:00.0: reg 0x190: [mem 0xfb6c0000-0xfb6c3fff 64bit pref]
pci 0000:08:00.0: VF(n) BAR3 space: [mem 0xfb6c0000-0xfb6dffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:08:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x2 link at 0000:00:1c.0 (capable of 16.000 Gb/s with 5 GT/s x4 link)
pci 0000:08:00.1: [8086:1521] type 00 class 0x020000
pci 0000:08:00.1: reg 0x10: [mem 0xfbd40000-0xfbd5ffff]
pci 0000:08:00.1: reg 0x18: [io 0xe040-0xe05f]
pci 0000:08:00.1: reg 0x1c: [mem 0xfbd88000-0xfbd8bfff]
pci 0000:08:00.1: PME# supported from D0 D3hot
pci 0000:08:00.1: reg 0x184: [mem 0xfb6a0000-0xfb6a3fff 64bit pref]
pci 0000:08:00.1: VF(n) BAR0 space: [mem 0xfb6a0000-0xfb6bffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:08:00.1: reg 0x190: [mem 0xfb680000-0xfb683fff 64bit pref]
pci 0000:08:00.1: VF(n) BAR3 space: [mem 0xfb680000-0xfb69ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:08:00.2: [8086:1521] type 00 class 0x020000
pci 0000:08:00.2: reg 0x10: [mem 0xfbd20000-0xfbd3ffff]
pci 0000:08:00.2: reg 0x18: [io 0xe020-0xe03f]
pci 0000:08:00.2: reg 0x1c: [mem 0xfbd84000-0xfbd87fff]
pci 0000:08:00.2: PME# supported from D0 D3hot
pci 0000:08:00.2: reg 0x184: [mem 0xfb660000-0xfb663fff 64bit pref]
pci 0000:08:00.2: VF(n) BAR0 space: [mem 0xfb660000-0xfb67ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:08:00.2: reg 0x190: [mem 0xfb640000-0xfb643fff 64bit pref]
pci 0000:08:00.2: VF(n) BAR3 space: [mem 0xfb640000-0xfb65ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:08:00.3: [8086:1521] type 00 class 0x020000
pci 0000:08:00.3: reg 0x10: [mem 0xfbd00000-0xfbd1ffff]
pci 0000:08:00.3: reg 0x18: [io 0xe000-0xe01f]
pci 0000:08:00.3: reg 0x1c: [mem 0xfbd80000-0xfbd83fff]
pci 0000:08:00.3: PME# supported from D0 D3hot
pci 0000:08:00.3: reg 0x184: [mem 0xfb620000-0xfb623fff 64bit pref]
pci 0000:08:00.3: VF(n) BAR0 space: [mem 0xfb620000-0xfb63ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:08:00.3: reg 0x190: [mem 0xfb600000-0xfb603fff 64bit pref]
pci 0000:08:00.3: VF(n) BAR3 space: [mem 0xfb600000-0xfb61ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:00:1c.0: PCI bridge to [bus 08-09]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.0: bridge window [mem 0xfb600000-0xfb6fffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
vgaarb: loaded
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00099c00-0x0009ffff]
e820: reserve RAM buffer [mem 0x784be000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7920d000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bd7a000-0x7bffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 4 devices
PnPBIOS: Disabled
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:02.2: PCI bridge to [bus 04-05]
pci 0000:00:02.2: bridge window [mem 0xfb800000-0xfbcfffff]
pci 0000:00:02.2: bridge window [mem 0xfb000000-0xfb4fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 06]
pci 0000:00:03.2: PCI bridge to [bus 07]
pci 0000:00:1c.0: PCI bridge to [bus 08-09]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.0: bridge window [mem 0xfb600000-0xfb6fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:04: resource 1 [mem 0xfb800000-0xfbcfffff]
pci_bus 0000:04: resource 2 [mem 0xfb000000-0xfb4fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:08: resource 2 [mem 0xfb600000-0xfb6fffff 64bit pref]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6e7 took 22389 usecs
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 21124K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x2b2ad000-0x2f2ad000] (64MB)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=14 max_order=21 bucket_order=7
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
pcieport 0000:00:01.0: AER enabled with IRQ 25
pcieport 0000:00:01.1: AER enabled with IRQ 26
pcieport 0000:00:02.0: AER enabled with IRQ 28
pcieport 0000:00:02.2: AER enabled with IRQ 29
pcieport 0000:00:03.0: AER enabled with IRQ 31
pcieport 0000:00:03.2: AER enabled with IRQ 32
pcieport 0000:00:01.0: Signaling PME with IRQ 25
pcieport 0000:00:01.1: Signaling PME with IRQ 26
pcieport 0000:00:02.0: Signaling PME with IRQ 28
pcieport 0000:00:02.2: Signaling PME with IRQ 29
pcieport 0000:00:03.0: Signaling PME with IRQ 31
pcieport 0000:00:03.2: Signaling PME with IRQ 32
pcieport 0000:00:1c.0: Signaling PME with IRQ 33
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x56
intel_idle: lapic_timer_reliable_states 0xffffffff
isapnp: Scanning for PnP cards...
tsc: Refined TSC clocksource calibration: 1496.534 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x15925873df6, max_idle_ns: 440795253867 ns
clocksource: Switched to clocksource tsc
isapnp: No Plug & Play device found
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: registered as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
mce: Using 22 MCE banks
microcode: sig=0x50663, pf=0x10, revision=0x700000d
microcode: Microcode Update Driver: v2.2.
Using IPI No-Shortcut mode
sched_clock: Marking stable (2684406299, 12998490)->(2818523752, -121118963)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
zswap: loaded using pool lzo/zbud
AppArmor: AppArmor sha1 policy hashing enabled
rtc_cmos 00:00: setting system clock to 2000-01-12 23:01:51 UTC (947718111)
Freeing unused kernel image memory: 892K
Write protecting the kernel text: 6780k
Write protecting the kernel read-only data: 2088k
NX-protecting the kernel data: 5508k
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x000000000000042F (\GPE0) (20180810/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x000000000000052C-0x000000000000052D (\GPIV) (20180810/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
cryptd: max_cpu_qlen set to 1000
SCSI subsystem initialized
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
ixgbe: Copyright (c) 1999-2016 Intel Corporation.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.19.0-6-686-pae xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
pmd_set_huge: Cannot satisfy [mem 0xfb200000-0xfb400000] with a huge-page mapping due to MTRR override.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
ehci-pci 0000:00:1d.0: EHCI Host Controller
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.19.0-6-686-pae xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
libata version 3.00 loaded.
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfbf33000
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xfbf32000 port 0xfbf32180 irq 46
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.19.0-6-686-pae ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
igb 0000:08:00.0: added PHC on eth0
igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.0: eth0: (PCIe:5.0Gb/s:Width x2) 00:c0:3a:d0:b4:8d
igb 0000:08:00.0: eth0: PBA No: 106300-000
igb 0000:08:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
igb 0000:08:00.1: added PHC on eth1
igb 0000:08:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.1: eth1: (PCIe:5.0Gb/s:Width x2) 00:c0:3a:d0:c4:8d
igb 0000:08:00.1: eth1: PBA No: 106300-000
igb 0000:08:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:08:00.2: added PHC on eth2
igb 0000:08:00.2: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.2: eth2: (PCIe:5.0Gb/s:Width x2) 00:c0:3a:d0:d4:8d
igb 0000:08:00.2: eth2: PBA No: 106300-000
igb 0000:08:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
e1000e 0000:00:19.0 eth3: (PCI Express:2.5GT/s:Width x1) 00:c0:3a:d0:84:8d
e1000e 0000:00:19.0 eth3: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth3: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 eno1: renamed from eth3
igb 0000:08:00.3: added PHC on eth3
igb 0000:08:00.3: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.3: eth3: (PCIe:5.0Gb/s:Width x2) 00:c0:3a:d0:e4:8d
igb 0000:08:00.3: eth3: PBA No: 106300-000
igb 0000:08:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:08:00.0 enp8s0f0: renamed from eth0
igb 0000:08:00.1 enp8s0f1: renamed from eth1
igb 0000:08:00.3 enp8s0f3: renamed from eth3
igb 0000:08:00.2 enp8s0f2: renamed from eth2
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-7: RENICE X5A, 80003030, max UDMA/133
ata2.00: 1979711488 sectors, multi 1: LBA48
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA RENICE X5A 3030 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 1979711488 512-byte logical blocks: (1.01 TB/944 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: new high-speed USB device number 2 using xhci_hcd
sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=0424, idProduct=2240, bcdDevice= 1.98
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Ultra Fast Media
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 000000225001
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0
scsi 6:0:0:0: Direct-Access Generic Ultra HS-COMBO 1.98 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdb] 126613504 512-byte logical blocks: (64.8 GB/60.4 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
ixgbe 0000:04:00.0: MAC: 5, PHY: 7, PBA No: 000200-000
ixgbe 0000:04:00.0: 00:c0:3a:d0:94:8d
sdb: sdb1 sdb2 < sdb5 >
sd 6:0:0:0: [sdb] Attached SCSI removable disk
ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection
ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0
ixgbe 0000:04:00.1: MAC: 5, PHY: 7, PBA No: 000200-000
ixgbe 0000:04:00.1: 00:c0:3a:d0:a4:8d
ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection
ixgbe 0000:04:00.0 enp4s0f0: renamed from eth0
ixgbe 0000:04:00.1 enp4s0f1: renamed from eth1
PM: Image not found (code -22)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: System time before build time, advancing clock.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86.
systemd[1]: Set hostname to .
systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Slices.
systemd[1]: Listening on initctl Compatibility Named Pipe.
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
systemd-journald[308]: Received request to flush runtime journal from PID 1
audit: type=1400 audit(1580723478.629:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=346 comm="apparmor_parser"
audit: type=1400 audit(1580723478.629:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=346 comm="apparmor_parser"
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
audit: type=1400 audit(1580723478.669:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=345 comm="apparmor_parser"
audit: type=1400 audit(1580723478.669:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=345 comm="apparmor_parser"
audit: type=1400 audit(1580723478.669:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=345 comm="apparmor_parser"
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 16)
iTCO_vendor_support: vendor-support=0
input: PC Speaker as /devices/platform/pcspkr/input/input2
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x0460)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 6:0:0:0: Attached scsi generic sg1 type 0
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
Adding 1045500k swap on /dev/sdb5. Priority:-2 extents:1 across:1045500k FS
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp8s0f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp8s0f2: link is not ready
ixgbe 0000:04:00.1: registered PHC device on enp4s0f1
IPv6: ADDRCONF(NETDEV_UP): enp4s0f1: link is not ready
ixgbe 0000:04:00.0: registered PHC device on enp4s0f0
IPv6: ADDRCONF(NETDEV_UP): enp4s0f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp8s0f3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp8s0f0: link is not ready
ixgbe 0000:04:00.1 enp4s0f1: NIC Link is Up 1 Gbps, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0f1: link becomes ready