dmesg - Kali_Linux_Memory
Linux version 5.3.0-kali2-amd64 (devel@kali.org) (gcc version 9.2.1 20191109 (Debian 9.2.1-19)) #1 SMP Debian 5.3.9-3kali1 (2019-11-20)
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
random: get_random_u32 called from bsp_init_amd+0x21c/0x2c0 with crng_init=0
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000006d69cfff] usable
BIOS-e820: [mem 0x000000006d69d000-0x000000006dbbcfff] reserved
BIOS-e820: [mem 0x000000006dbbd000-0x000000006de74fff] usable
BIOS-e820: [mem 0x000000006de75000-0x000000006df80fff] ACPI NVS
BIOS-e820: [mem 0x000000006df81000-0x000000006e611fff] reserved
BIOS-e820: [mem 0x000000006e612000-0x000000006e657fff] type 20
BIOS-e820: [mem 0x000000006e658000-0x000000006e658fff] usable
BIOS-e820: [mem 0x000000006e659000-0x000000006e85efff] ACPI NVS
BIOS-e820: [mem 0x000000006e85f000-0x000000006ec8afff] usable
BIOS-e820: [mem 0x000000006ec8b000-0x000000006eff3fff] reserved
BIOS-e820: [mem 0x000000006eff4000-0x000000006effffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000044effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0x6def9000 ACPI 2.0=0x6def9000 SMBIOS=0xf04c0 MPS=0xfd490
secureboot: Secure boot could not be determined (mode 0)
SMBIOS 2.8 present.
DMI: ASUSTeK COMPUTER INC. X550ZE/X550ZE, BIOS 204 11/20/2014
tsc: Fast TSC calibration using PIT
tsc: Detected 2495.244 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x44f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000070000000 mask FFFFF0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000044f000000 aka 17648M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0x70000000-0xffffffff] usable ==> reserved
last_pfn = 0x6f000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd760-0x000fd76f]
Using GB pages for direct mapping
BRK [0x3f6401000, 0x3f6401fff] PGTABLE
BRK [0x3f6402000, 0x3f6402fff] PGTABLE
BRK [0x3f6403000, 0x3f6403fff] PGTABLE
BRK [0x3f6404000, 0x3f6404fff] PGTABLE
BRK [0x3f6405000, 0x3f6405fff] PGTABLE
BRK [0x3f6406000, 0x3f6406fff] PGTABLE
BRK [0x3f6407000, 0x3f6407fff] PGTABLE
BRK [0x3f6408000, 0x3f6408fff] PGTABLE
BRK [0x3f6409000, 0x3f6409fff] PGTABLE
BRK [0x3f640a000, 0x3f640afff] PGTABLE
BRK [0x3f640b000, 0x3f640bfff] PGTABLE
BRK [0x3f640c000, 0x3f640cfff] PGTABLE
RAMDISK: [mem 0x3012d000-0x3408dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000006DEF9000 000024 (v02 _ASUS_)
ACPI: XSDT 0x000000006DEF9090 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: FACP 0x000000006DF08E10 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20190703/tbfadt-615)
ACPI: DSDT 0x000000006DEF91C8 00FC46 (v02 _ASUS_ Notebook 00000204 INTL 20051117)
ACPI: FACS 0x000000006DF62F80 000040
ACPI: APIC 0x000000006DF08F20 00007E (v03 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: FPDT 0x000000006DF08FA0 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: ECDT 0x000000006DF08FE8 0000C1 (v01 _ASUS_ Notebook 00000001 OEM. 00000003)
ACPI: MCFG 0x000000006DF090B0 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00010013)
ACPI: HPET 0x000000006DF090F0 000038 (v01 _ASUS_ Notebook 01072009 AMI 00000005)
ACPI: UEFI 0x000000006DF09128 000042 (v01 _ASUS_ Notebook 01072009 00000000)
ACPI: SSDT 0x000000006DF09170 000B9C (v01 AMD BALLINA 00000001 AMD 00000001)
ACPI: SSDT 0x000000006DF09D10 009AC7 (v02 AMD BALLINA 00000002 MSFT 04000000)
ACPI: CRAT 0x000000006DF137D8 0005A0 (v01 AMD BALLINA 00000001 AMD 00000001)
ACPI: SSDT 0x000000006DF13D78 000474 (v01 AMD CPMXPRES 00000001 INTL 20051117)
ACPI: SSDT 0x000000006DF141F0 00122C (v01 AMD CPMCMN 00000001 INTL 20051117)
ACPI: SSDT 0x000000006DF15420 001087 (v01 AMD CPMZPODD 00000001 INTL 20051117)
ACPI: SSDT 0x000000006DF164A8 001434 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
ACPI: SSDT 0x000000006DF178E0 000852 (v01 AMD CPMDFDGP 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000044effffff]
NODE_DATA(0) allocated [mem 0x44effa000-0x44effefff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000044effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000006d69cfff]
node 0: [mem 0x000000006dbbd000-0x000000006de74fff]
node 0: [mem 0x000000006e658000-0x000000006e658fff]
node 0: [mem 0x000000006e85f000-0x000000006ec8afff]
node 0: [mem 0x000000006eff4000-0x000000006effffff]
node 0: [mem 0x0000000100000000-0x000000044effffff]
Zeroed struct page in unavailable ranges: 8915 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000044effffff]
On node 0 totalpages: 3919149
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 6967 pages used for memmap
DMA32 zone: 445838 pages, LIFO batch:63
Normal zone: 54208 pages used for memmap
Normal zone: 3469312 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x6d69d000-0x6dbbcfff]
PM: Registered nosave memory: [mem 0x6de75000-0x6df80fff]
PM: Registered nosave memory: [mem 0x6df81000-0x6e611fff]
PM: Registered nosave memory: [mem 0x6e612000-0x6e657fff]
PM: Registered nosave memory: [mem 0x6e659000-0x6e85efff]
PM: Registered nosave memory: [mem 0x6ec8b000-0x6eff3fff]
PM: Registered nosave memory: [mem 0x6f000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x6f000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 53 pages/cpu s178200 r8192 d30696 u524288
pcpu-alloc: s178200 r8192 d30696 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 3857885
Policy zone: Normal
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 15062248K/15676596K available (10243K kernel code, 1197K rwdata, 3560K rodata, 1660K init, 2096K bss, 614348K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 33163 entries in 130 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 33024, nr_irqs: 1000, preallocated irqs: 16
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190703
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f7acdb426, max_idle_ns: 440795279105 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.48 BogoMIPS (lpj=9980976)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 24K
smpboot: CPU0: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G (family: 0x15, model: 0x30, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (19961.95 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x6de75000-0x6df80fff] (1097728 bytes)
PM: Registering ACPI NVS region [mem 0x6e659000-0x6e85efff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1575497170.148:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
alg: No test for lzo-rle (lzo-rle-generic)
alg: No test for lzo-rle (lzo-rle-scomp)
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \: Used as first EC
ACPI: \: GPE=0x15, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: Boot ECDT EC used to handle transactions
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
pci 0000:00:01.0: [1002:130d] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
pci 0000:00:01.0: enabling Extended Tags
pci 0000:00:01.0: BAR 0: assigned to efifb
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
pci 0000:00:01.1: enabling Extended Tags
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
pci 0000:00:02.1: [1022:1425] type 01 class 0x060400
pci 0000:00:02.1: enabling Extended Tags
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb6f000-0xfeb6f7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb6e000-0xfeb6efff]
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb6d000-0xfeb6d0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb6c000-0xfeb6cfff]
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb6b000-0xfeb6b0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.7: [1022:7806] type 00 class 0x080501
pci 0000:00:14.7: reg 0x10: [mem 0xfeb6a000-0xfeb6a0ff 64bit]
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: enabling Extended Tags
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
pci 0000:00:15.1: enabling Extended Tags
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: PME# supported from D0 D3hot D3cold
pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
pci 0000:00:15.2: enabling Extended Tags
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.2: PME# supported from D0 D3hot D3cold
pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
pci 0000:01:00.0: [1002:6665] type 00 class 0x038000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x8 link at 0000:00:02.1 (capable of 63.008 Gb/s with 8 GT/s x8 link)
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.1: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: extended config space not accessible
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xb0000000-0xffffffff window] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [168c:0036] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xfe900000-0xfe97ffff 64bit]
pci 0000:04:00.0: reg 0x30: [mem 0xfe980000-0xfe98ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 04]
pci 0000:00:15.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xfe800000-0xfe800fff 64bit]
pci 0000:05:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.2: PCI bridge to [bus 05]
pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.2: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:15.2: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *4 5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x15, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot ECDT EC used to handle transactions and events
pci 0000:00:01.0: vgaarb: setting as boot VGA device
pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:01.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x6d69d000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6de75000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6e659000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6ec8b000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6f000000-0x6fffffff]
e820: reserve RAM buffer [mem 0x44f000000-0x44fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x70000000-0xafffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs ATK3001 PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs ETD0108 PNP0f13 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x040b] has been reserved
system 00:08: [io 0x04d6] has been reserved
system 00:08: [io 0x0c00-0x0c01] has been reserved
system 00:08: [io 0x0c14] has been reserved
system 00:08: [io 0x0c50-0x0c51] has been reserved
system 00:08: [io 0x0c52] has been reserved
system 00:08: [io 0x0c6c] has been reserved
system 00:08: [io 0x0c6f] has been reserved
system 00:08: [io 0x0cd0-0x0cd1] has been reserved
system 00:08: [io 0x0cd2-0x0cd3] has been reserved
system 00:08: [io 0x0cd4-0x0cd5] has been reserved
system 00:08: [io 0x0cd6-0x0cd7] has been reserved
system 00:08: [io 0x0cd8-0x0cdf] has been reserved
system 00:08: [io 0x0800-0x089f] has been reserved
system 00:08: [io 0x0b20-0x0b3f] has been reserved
system 00:08: [io 0x0900-0x090f] has been reserved
system 00:08: [io 0x0910-0x091f] has been reserved
system 00:08: [io 0xfe00-0xfefe] has been reserved
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:08: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:08: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.1: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.1: PCI bridge to [bus 04]
pci 0000:00:15.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:15.2: PCI bridge to [bus 05]
pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.2: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:15.2: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xb0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:02: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:02: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:02: resource 10 [mem 0xb0000000-0xffffffff window]
pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:05: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x645 took 26959 usecs
pci 0000:00:12.2: quirk_usb_early_handoff+0x0/0x645 took 19504 usecs
pci 0000:00:12.2: PME# does not work under D3, disabling it
pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x645 took 78033 usecs
pci 0000:00:13.2: quirk_usb_early_handoff+0x0/0x645 took 19569 usecs
pci 0000:00:13.2: PME# does not work under D3, disabling it
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 64900K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x5dee9000-0x61ee9000] (64MB)
amd_uncore: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000001ff)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler mq-deadline registered
pcieport 0000:00:02.1: PME: Signaling with IRQ 24
pcieport 0000:00:02.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
pcieport 0000:00:15.0: PME: Signaling with IRQ 25
pcieport 0000:00:15.1: PME: Signaling with IRQ 26
pcieport 0000:00:15.2: PME: Signaling with IRQ 27
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xb0000000, using 4224k, total 4224k
efifb: mode is 1366x768x32, linelength=5632, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (101 C)
Linux agpgart interface v0.103
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel
AMD-Vi: AMD IOMMUv2 functionality not available on this system
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: registered as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
NET: Registered protocol family 10
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: CPU0: patch_level=0x06003106
microcode: CPU1: patch_level=0x06003106
microcode: CPU2: patch_level=0x06003106
microcode: CPU3: patch_level=0x06003106
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (2124685824, 284713)->(2170500100, -45529563)
registered taskstats version 1
Loading compiled-in X.509 certificates
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
zswap: loaded using pool lzo/zbud
AppArmor: AppArmor sha1 policy hashing enabled
rtc_cmos 00:04: setting system clock to 2019-12-04T22:06:12 UTC (1575497172)
Freeing unused kernel image memory: 1660K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel image memory: 2036K
Freeing unused kernel image memory: 536K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
acpi device:02: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input7
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B7F (\_SB.SMB0) (20190703/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
SCSI subsystem initialized
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7806] (rev 0)
mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6d000
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
libata version 3.00 loaded.
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.3.0-kali2-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000418
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.3.0-kali2-amd64 xhci-hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6b000
[drm] radeon kernel modesetting enabled.
usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.3.0-kali2-amd64 xhci-hcd
usb usb3: SerialNumber: 0000:00:10.0
hub 3-0:1.0: USB hub found
vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
hub 3-0:1.0: 2 ports detected
ATPX version 1, functions 0x00000003
cryptd: max_cpu_qlen set to 1000
radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xb0000000 -> 0xbfffffff
radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xd0000000 -> 0xd07fffff
radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 5: 0xfeb00000 -> 0xfeb3ffff
checking generic (b0000000 420000) vs hw (b0000000 10000000)
fb0: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
radeon 0000:00:01.0: vgaarb: deactivate vga console
[drm] initializing kernel modesetting (KAVERI 0x1002:0x130D 0x1043:0x222D 0x00).
[drm] doorbell mmio base: 0xD0000000
[drm] doorbell mmio size: 8388608
ATOM BIOS: 113
radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 7659426 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading kaveri Microcode
radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kaveri_pfp.bin
radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kaveri_me.bin
radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kaveri_ce.bin
radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kaveri_mec.bin
radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kaveri_mec2.bin
radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kaveri_rlc.bin
radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kaveri_sdma.bin
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
radeon 0000:00:01.0: firmware: direct-loading firmware radeon/bonaire_uvd.bin
[drm] Found UVD firmware Version: 1.64 Family ID: 9
radeon 0000:00:01.0: firmware: direct-loading firmware radeon/BONAIRE_vce.bin
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 524288, num gpu pages 524288
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 5.3.0-kali2-amd64 ehci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb6e000
libphy: r8169: probed
r8169 0000:05:00.0 eth0: RTL8168g/8111g, 14:dd:a9:0b:0e:40, XID 4c0, IRQ 35
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb6f000 port 0xfeb6f100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xfeb6f000 port 0xfeb6f180 irq 28
ata3: SATA max UDMA/133 abar m2048@0xfeb6f000 port 0xfeb6f200 irq 28
ata4: SATA max UDMA/133 abar m2048@0xfeb6f000 port 0xfeb6f280 irq 28
ata5: SATA max UDMA/133 abar m2048@0xfeb6f000 port 0xfeb6f300 irq 28
ata6: SATA max UDMA/133 abar m2048@0xfeb6f000 port 0xfeb6f380 irq 28
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x(____ptrval____)
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0x(____ptrval____)
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0x(____ptrval____)
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x(____ptrval____)
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0x(____ptrval____)
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0x(____ptrval____)
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0x(____ptrval____)
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0x(____ptrval____)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 4 usecs
[drm] ring test on 1 succeeded in 3 usecs
[drm] ring test on 2 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 5.3.0-kali2-amd64 ohci_hcd
usb usb5: SerialNumber: 0000:00:12.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6c000
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 5.3.0-kali2-amd64 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
[drm] ring test on 6 succeeded in 18 usecs
[drm] ring test on 7 succeeded in 4 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
usb 2-1: new full-speed USB device number 2 using xhci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
usb 4-4: new high-speed USB device number 2 using ehci-pci
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: MATSHITADVD-RAM UJ8G6, 1.00, max UDMA/133
ata3.00: configured for UDMA/133
usb 4-4: New USB device found, idVendor=0bda, idProduct=57b4, bcdDevice= 0.13
usb 4-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 4-4: Product: USB Camera
usb 4-4: Manufacturer: 04081-00092300F588FW
usb 4-4: SerialNumber: 200901010001
ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX0R2J, max UDMA/100
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 2J PQ: 0 ANSI: 5
scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8G6 1.00 PQ: 0 ANSI: 5
usb 2-1: New USB device found, idVendor=04d9, idProduct=a09f, bcdDevice= 2.35
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Gaming Mouse
usb 2-1: Manufacturer: E-Signal
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
hidraw: raw HID events driver (C) Jiri Kosina
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: E-Signal USB Gaming Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/0003:04D9:A09F.0001/input/input12
hid-generic 0003:04D9:A09F.0001: input,hidraw0: USB HID v1.10 Mouse [E-Signal USB Gaming Mouse] on usb-0000:00:10.0-1/input0
input: E-Signal USB Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/0003:04D9:A09F.0002/input/input13
tsc: Refined TSC clocksource calibration: 2495.335 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f8031522b, max_idle_ns: 440795271144 ns
clocksource: Switched to clocksource tsc
[drm] ib test on ring 1 succeeded in 0 usecs
input: E-Signal USB Gaming Mouse System Control as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/0003:04D9:A09F.0002/input/input14
input: E-Signal USB Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/0003:04D9:A09F.0002/input/input15
input: E-Signal USB Gaming Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/0003:04D9:A09F.0002/input/input16
hid-generic 0003:04D9:A09F.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [E-Signal USB Gaming Mouse] on usb-0000:00:10.0-1/input1
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14
hid-generic 0003:04D9:A09F.0003: hiddev1,hidraw2: USB HID v1.10 Device [E-Signal USB Gaming Mouse] on usb-0000:00:10.0-1/input2
sd 0:0:0:0: [sda] Attached SCSI disk
sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
usb 6-5: new full-speed USB device number 2 using ohci-pci
random: fast init done
usb 6-5: New USB device found, idVendor=13d3, idProduct=3408, bcdDevice= 0.01
usb 6-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x381f17)
psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
psmouse serio4: elantech: Elan sample query result 0f, 19, 75
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input18
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] CRT1: INTERNAL_UNIPHY2
[drm] CRT1: NUTMEG
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] eDP-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] fb mappable at 0xB0731000
[drm] vram apper at 0xB0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xc0000000 -> 0xcfffffff
radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xfea00000 -> 0xfea3ffff
radeon 0000:01:00.0: enabling device (0000 -> 0003)
[drm] initializing kernel modesetting (HAINAN 0x1002:0x6665 0x1043:0x130D 0x00).
vga_switcheroo: enabled
ATOM BIOS: Asus
[drm] GPU not posted. posting now...
radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 64bits DDR
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading hainan Microcode
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_pfp.bin
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_me.bin
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_ce.bin
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_rlc.bin
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_mc.bin
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_smc.bin
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x(____ptrval____)
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x(____ptrval____)
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x(____ptrval____)
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x(____ptrval____)
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x(____ptrval____)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
[drm] amdgpu kernel modesetting enabled.
vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
ATPX version 1, functions 0x00000003
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add APU node [0x0:0x0]
Finished initializing topology
PM: Image not found (code -22)
random: crng init done
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 243-8 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/pcscd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
systemd-journald[364]: Received client request to flush runtime journal.
acpi_cpufreq: overriding BIOS provided _PSD data
battery: ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [AC0] (on-line)
input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input19
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
input: PC Speaker as /devices/platform/pcspkr/input/input20
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x1
asus_wmi: BIOS WMI version: 8.1
asus_wmi: SFUN value: 0x4a0875
asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input21
asus_wmi: Number of fans: 0
EFI Variables Facility v0.08 2004-May-17
pstore: Using crash dump compression: deflate
pstore: Registered efi as persistent store backend
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input22
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
mc: Linux media interface: v0.10
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
usbcore: registered new interface driver btusb
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
videodev: Linux video capture interface: v2.00
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input23
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input24
usb 6-5: firmware: direct-loading firmware ar3k/AthrBT_0x31010000.dfu
ath9k 0000:04:00.0: enabling device (0000 -> 0002)
ath: phy0: WB335 2-ANT card detected
ath: phy0: Set BT/WLAN RX diversity capability
ath: phy0: Enable LNA combining
ath: EEPROM regdomain: 0x6a
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffb15e43280000, irq=17
usb 6-5: firmware: direct-loading firmware ar3k/ramps_0x31010000_40.dfu
usb 6-5: USB disconnect, device number 2
usbcore: registered new interface driver ath3k
uvcvideo: Found UVC 1.00 device USB Camera (0bda:57b4)
uvcvideo 4-4:1.0: Entity type for entity Extension 7 was not initialized!
uvcvideo 4-4:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 4-4:1.0: Entity type for entity Camera 1 was not initialized!
uvcvideo 4-4:1.0: Entity type for entity Extension 4 was not initialized!
input: USB Camera: USB Camera as /devices/pci0000:00/0000:00:13.2/usb4/4-4/4-4:1.0/input/input25
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb 6-5: new full-speed USB device number 3 using ohci-pci
Adding 31209468k swap on /dev/sda10. Priority:-2 extents:1 across:31209468k FS
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
usb 6-5: New USB device found, idVendor=13d3, idProduct=3408, bcdDevice= 0.02
usb 6-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
r8169 0000:05:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
Generic Realtek PHY r8169-500:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-500:00, irq=IGNORE)
r8169 0000:05:00.0 eth0: Link is Down
[drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
wlan0: authenticate with e4:6f:13:60:48:da
wlan0: send auth to e4:6f:13:60:48:da (try 1/3)
wlan0: authenticated
wlan0: associate with e4:6f:13:60:48:da (try 1/3)
wlan0: RX AssocResp from e4:6f:13:60:48:da (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x000000001cf5d1c6
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000c81217bf
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x0000000095fbb141
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x000000001f4025a4
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x00000000beb863b6
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
rfkill: input handler disabled
[drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x000000001cf5d1c6
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000c81217bf
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x0000000095fbb141
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x000000001f4025a4
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x00000000beb863b6
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
rfkill: input handler enabled
fuse: init (API version 7.31)
rfkill: input handler disabled
[drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x000000001cf5d1c6
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000c81217bf
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x0000000095fbb141
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x000000001f4025a4
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x00000000beb863b6
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x000000001cf5d1c6
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000c81217bf
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x0000000095fbb141
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x000000001f4025a4
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x00000000beb863b6
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x000000001cf5d1c6
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000c81217bf
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x0000000095fbb141
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x000000001f4025a4
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x00000000beb863b6
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
wlan0: authenticate with e4:6f:13:60:48:da
wlan0: send auth to e4:6f:13:60:48:da (try 1/3)
wlan0: authenticated
wlan0: associate with e4:6f:13:60:48:da (try 1/3)
wlan0: RX AssocResp from e4:6f:13:60:48:da (capab=0x431 status=0 aid=3)
wlan0: associated
wlan0: deauthenticated from e4:6f:13:60:48:da (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
wlan0: authenticate with e4:6f:13:60:48:da
wlan0: send auth to e4:6f:13:60:48:da (try 1/3)
wlan0: authenticated
wlan0: associate with e4:6f:13:60:48:da (try 1/3)
wlan0: RX AssocResp from e4:6f:13:60:48:da (capab=0x431 status=0 aid=3)
wlan0: associated
[drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x000000001cf5d1c6
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000c81217bf
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x0000000095fbb141
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x000000001f4025a4
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x00000000beb863b6
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x000000001cf5d1c6
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000c81217bf
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x0000000095fbb141
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x000000001f4025a4
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x00000000beb863b6
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x000000001cf5d1c6
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000c81217bf
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x0000000095fbb141
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x000000001f4025a4
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x00000000beb863b6
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x000000001cf5d1c6
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000c81217bf
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x0000000095fbb141
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x000000001f4025a4
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x00000000beb863b6
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs