dmesg - mitigations=off
microcode: microcode updated early to revision 0x21, date = 2019-02-13
Linux version 4.12.14-lp151.28.32-default (geeko@buildhost) (gcc version 7.4.1 20190905 [gcc-7-branch revision 275407] (SUSE Linux) ) #1 SMP Wed Nov 13 07:50:15 UTC 2019 (6e1aaad)
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dd18afff] usable
BIOS-e820: [mem 0x00000000dd18b000-0x00000000dd7b9fff] reserved
BIOS-e820: [mem 0x00000000dd7ba000-0x00000000dd7cafff] ACPI data
BIOS-e820: [mem 0x00000000dd7cb000-0x00000000dd8effff] ACPI NVS
BIOS-e820: [mem 0x00000000dd8f0000-0x00000000de7cafff] reserved
BIOS-e820: [mem 0x00000000de7cb000-0x00000000de7cbfff] usable
BIOS-e820: [mem 0x00000000de7cc000-0x00000000de80efff] ACPI NVS
BIOS-e820: [mem 0x00000000de80f000-0x00000000dec4afff] usable
BIOS-e820: [mem 0x00000000dec4b000-0x00000000deff3fff] reserved
BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/P8Z77-V, BIOS 2104 08/13/2013
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FF0000000 write-back
2 base 210000000 mask FF8000000 write-back
3 base 218000000 mask FFC000000 write-back
4 base 21C000000 mask FFE000000 write-back
5 base 21E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8c0-0x000fd8cf] mapped at [ffffffffff2008c0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Kernel/User page tables isolation: disabled on command line.
BRK [0x0308e000, 0x0308efff] PGTABLE
BRK [0x0308f000, 0x0308ffff] PGTABLE
BRK [0x03090000, 0x03090fff] PGTABLE
BRK [0x03091000, 0x03091fff] PGTABLE
BRK [0x03092000, 0x03092fff] PGTABLE
BRK [0x03093000, 0x03093fff] PGTABLE
RAMDISK: [mem 0x35109000-0x3687bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DD7BD080 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DD7C8820 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DD7BD188 00B693 (v02 ALASKA A M I 00000022 INTL 20051117)
ACPI: FACS 0x00000000DD8EE080 000040
ACPI: APIC 0x00000000DD7C8930 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DD7C89A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DD7C89F0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DD7C8A30 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DD7C8A68 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: BGRT 0x00000000DD7CA2F8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DD7C8E30 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DD7C97E0 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: DMAR 0x00000000DD7CA278 000080 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021effffff]
NODE_DATA(0) allocated [mem 0x21efe0000-0x21eff5fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000dd18afff]
node 0: [mem 0x00000000de7cb000-0x00000000de7cbfff]
node 0: [mem 0x00000000de80f000-0x00000000dec4afff]
node 0: [mem 0x00000000deff4000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000021effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
On node 0 totalpages: 2082160
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14104 pages used for memmap
DMA32 zone: 902612 pages, LIFO batch:63
Normal zone: 18368 pages used for memmap
Normal zone: 1175552 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdd18b000-0xdd7b9fff]
PM: Registered nosave memory: [mem 0xdd7ba000-0xdd7cafff]
PM: Registered nosave memory: [mem 0xdd7cb000-0xdd8effff]
PM: Registered nosave memory: [mem 0xdd8f0000-0xde7cafff]
PM: Registered nosave memory: [mem 0xde7cc000-0xde80efff]
PM: Registered nosave memory: [mem 0xdec4b000-0xdeff3fff]
PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 48 pages/cpu @ffff88021ec00000 s159744 r8192 d28672 u524288
pcpu-alloc: s159744 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2049603
Policy zone: Normal
PCIe ASPM is forcibly enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 5731632K/8328640K available (10256K kernel code, 1479K rwdata, 3348K rodata, 2104K init, 9888K bss, 255448K reserved, 0K cma-reserved)
ftrace: allocating 34410 entries in 135 pages
Hierarchical RCU implementation.
RCU event tracing is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:456 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3400.118 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.23 BogoMIPS (lpj=13600472)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170303
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Speculative Store Bypass: Vulnerable
Freeing SMP alternatives memory: 32K
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x000000dd73c000 end: 0x000000dd74dfff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (27200.94 BogoMIPS)
node 0 initialised, 585390 pages in 8ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xdd7cb000-0xdd8effff] (1200128 bytes)
PM: Registering ACPI NVS region [mem 0xde7cc000-0xde80efff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 14:17:43, date: 11/17/19
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88021EDD5000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880186A2B800 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880187D1F800 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 10 GPEs in block 00 to 3F
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7420000-0xf742ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf743b000-0xf743b00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7400000-0xf741ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7439000-0xf7439fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7438000-0xf74383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7430000-0xf7433fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7437000-0xf74373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7436000-0xf74367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7435000-0xf74350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1b81] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:03:00.0: reg 0x10: [io 0xd050-0xd057]
pci 0000:03:00.0: reg 0x14: [io 0xd040-0xd043]
pci 0000:03:00.0: reg 0x18: [io 0xd030-0xd037]
pci 0000:03:00.0: reg 0x1c: [io 0xd020-0xd023]
pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:03:00.0: reg 0x24: [mem 0xf7300000-0xf73001ff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:00:1c.4: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
pci 0000:06:00.0: [168c:0032] type 00 class 0x028000
pci 0000:06:00.0: reg 0x10: [mem 0xf7200000-0xf727ffff 64bit]
pci 0000:06:00.0: reg 0x30: [mem 0xf7280000-0xf728ffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xf7100000-0xf7107fff 64bit]
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
iommu: Default domain type: Passthrough
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
Linux cec interface: v0.10
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdd18b000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde7cc000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdec4b000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x1000-0x100f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] has been reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf2000000-0xf2000fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf2100000-0xf22fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf2300000-0xf24fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf2100000-0xf22fffff]
pci 0000:00:1c.0: bridge window [mem 0xf2300000-0xf24fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:00:1c.4: PCI bridge to [bus 04-05]
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf2100000-0xf22fffff]
pci_bus 0000:02: resource 2 [mem 0xf2300000-0xf24fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:05: resource 13 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:06: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:07: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 24012K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd918b000-0xdd18b000] (64MB) mapped at [ffff8800d918b000-ffff8800dd18afff]
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1574000264.740:1): state=initialized audit_enabled=0 res=1
workingset: timestamp_bits=37 max_order=21 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered (default)
io scheduler deadline registered
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 2560x1080x32, linelength=10240, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90002000000, using 10816k, total 10816k
Console: switching to colour frame buffer device 320x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
intel_pstate: Intel P-state setting Desktop Load-based policy
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
NET: Registered protocol family 10
Segment Routing with IPv6
mce: Using 9 MCE banks
microcode: sig=0x306a9, pf=0x2, revision=0x21
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1999606079, 0)->(2068076518, -68470439)
registered taskstats version 1
zswap: loaded using pool lzo/zbud
page_owner is disabled
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
ima: Allocated hash algorithm: sha256
evm: HMAC attrs: 0x1
Magic number: 11:512:283
rtc_cmos 00:02: setting system clock to 2019-11-17 14:17:45 UTC (1574000265)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2104K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2020K
Freeing unused kernel memory: 748K
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Swap.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Socket.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice System Slice.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
alua: device handler registered
emc: device handler registered
rdac: device handler registered
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ipmi message handler version 39.2
ipmi device interface
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.12.14-lp151.28.32-default xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.12.14-lp151.28.32-default xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ahci 0000:00:1f.2: version 3.0
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia-nvlink: Nvlink Core is being initialized, major device number 243
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
xhci_hcd 0000:07:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.12.14-lp151.28.32-default xhci-hcd
usb usb3: SerialNumber: 0000:07:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.12.14-lp151.28.32-default xhci-hcd
usb usb4: SerialNumber: 0000:07:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7436000 port 0xf7436100 irq 26
ata2: SATA max UDMA/133 abar m2048@0xf7436000 port 0xf7436180 irq 26
ata3: SATA max UDMA/133 abar m2048@0xf7436000 port 0xf7436200 irq 26
ata4: SATA max UDMA/133 abar m2048@0xf7436000 port 0xf7436280 irq 26
ata5: SATA max UDMA/133 abar m2048@0xf7436000 port 0xf7436300 irq 26
ata6: SATA max UDMA/133 abar m2048@0xf7436000 port 0xf7436380 irq 26
ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xf7300000 port 0xf7300100 irq 32
ata8: SATA max UDMA/133 abar m512@0xf7300000 port 0xf7300180 irq 32
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7438000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 4.12.14-lp151.28.32-default ehci_hcd
usb usb5: SerialNumber: 0000:00:1a.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7437000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 4.12.14-lp151.28.32-default ehci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 440.31 Sun Oct 27 02:19:35 UTC 2019
nvidia-uvm: Loaded the UVM driver, major device number 241.
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.31 Sun Oct 27 02:09:30 UTC 2019
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT2._GTF, AE_NOT_FOUND (20170303/psparse-516)
usb 1-3: new high-speed USB device number 2 using xhci_hcd
ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT3._GTF, AE_NOT_FOUND (20170303/psparse-516)
ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT5._GTF, AE_NOT_FOUND (20170303/psparse-516)
ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170303/psparse-516)
ata3.00: ATA-11: Patriot Burst, SBFM61.3, max UDMA/133
ata3.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170303/psparse-516)
ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170303/psparse-516)
ata2.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-9: GOODRAM, SAFM01.7, max UDMA/133
ata1.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT2._GTF, AE_NOT_FOUND (20170303/psparse-516)
ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170303/psparse-516)
ata4.00: ATA-11: SSDPR-CX400-256-A, SBFM61.3, max UDMA/133
ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-9: WDC WD10EFRX-68PJCN0, 82.00A82, max UDMA/133
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
ata2.00: disabling queued TRIM support
ata2.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0DB6Q, max UDMA/133
ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
scsi 0:0:0:0: Direct-Access ATA GOODRAM 01.7 PQ: 0 ANSI: 5
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT3._GTF, AE_NOT_FOUND (20170303/psparse-516)
ata6.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170303/psparse-516)
ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170303/psparse-516)
ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT5._GTF, AE_NOT_FOUND (20170303/psparse-516)
ata2.00: supports DRM functions and may not be fully accessible
ata4.00: configured for UDMA/133
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ata6.00: configured for UDMA/133
ata2.00: disabling queued TRIM support
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Direct-Access ATA Patriot Burst 61.3 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi 3:0:0:0: Direct-Access ATA SSDPR-CX400-256- 61.3 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 2:0:0:0: [sdc] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 3:0:0:0: [sdd] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: configured for UDMA/133
sdb: sdb1 sdb2
scsi 4:0:0:0: Direct-Access ATA WDC WD10EFRX-68P 0A82 PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 4:0:0:0: [sde] 4096-byte physical blocks
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg4 type 0
scsi 5:0:0:0: Direct-Access ATA ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] supports TCG Opal
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 5:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 5:0:0:0: [sdf] 4096-byte physical blocks
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sdd: sdd1 sdd2
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 3:0:0:0: [sdd] Attached SCSI disk
sd 2:0:0:0: [sdc] Attached SCSI disk
random: fast init done
sdf: sdf1 sdf2
sd 5:0:0:0: [sdf] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3400.023 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31026473058, max_idle_ns: 440795314252 ns
sde: sde1 sde2
sd 4:0:0:0: [sde] Attached SCSI disk
usb 6-1: new high-speed USB device number 2 using ehci-pci
usb 5-1: new high-speed USB device number 2 using ehci-pci
usb 3-1: new high-speed USB device number 2 using xhci_hcd
usb 1-3: New USB device found, idVendor=041e, idProduct=4088
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: VF0700 Live! Cam Chat HD
usb 1-3: Manufacturer: Creative Technology Ltd.
usb 1-3: SerialNumber: 0J230630
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7.00: ATA-8: SanDisk SDSSDHP128G, X2316RL, max UDMA/133
ata7.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access ATA SanDisk SDSSDHP1 6RL PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg6 type 0
sd 6:0:0:0: [sdg] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 6:0:0:0: [sdg] Write Protect is off
sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdg: sdg1 sdg2 sdg3 sdg4
sd 6:0:0:0: [sdg] Attached SCSI disk
usb 6-1: New USB device found, idVendor=8087, idProduct=0024
usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-1: New USB device found, idVendor=8087, idProduct=0024
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 6-1:1.0: USB hub found
hub 5-1:1.0: USB hub found
hub 6-1:1.0: 8 ports detected
hub 5-1:1.0: 6 ports detected
usb 3-1: New USB device found, idVendor=1532, idProduct=0508
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Razer Seiren Pro
usb 3-1: Manufacturer: Razer Inc.
usb 3-1: SerialNumber: UC1730132406583
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Razer Inc. Razer Seiren Pro as /devices/pci0000:00/0000:00:1c.7/0000:07:00.0/usb3/3-1/3-1:1.3/0003:1532:0508.0001/input/input2
usb 1-4: new full-speed USB device number 3 using xhci_hcd
hid-generic 0003:1532:0508.0001: input,hidraw0: USB HID v1.00 Device [Razer Inc. Razer Seiren Pro] on usb-0000:07:00.0-1/input3
usb 3-2: new full-speed USB device number 3 using xhci_hcd
ata8: SATA link down (SStatus 0 SControl 300)
usb 1-4: New USB device found, idVendor=1852, idProduct=7921
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: Audiotrak ProDigy CUBE
usb 1-4: Manufacturer: GYROCOM C&C Co., LTD
input: GYROCOM C&C Co., LTD Audiotrak ProDigy CUBE as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:1852:7921.0002/input/input3
hid-generic 0003:1852:7921.0002: input,hidraw1: USB HID v1.00 Device [GYROCOM C&C Co., LTD Audiotrak ProDigy CUBE] on usb-0000:00:14.0-4/input0
usb 5-1.5: new full-speed USB device number 3 using ehci-pci
EXT4-fs (sdg4): mounted filesystem with ordered data mode. Opts: (null)
usb 3-2: New USB device found, idVendor=03f0, idProduct=1141
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: HP OMEN Mouse X9000
usb 3-2: Manufacturer: HP
input: HP HP OMEN Mouse X9000 as /devices/pci0000:00/0000:00:1c.7/0000:07:00.0/usb3/3-2/3-2:1.0/0003:03F0:1141.0003/input/input4
hid-generic 0003:03F0:1141.0003: input,hidraw2: USB HID v1.11 Mouse [HP HP OMEN Mouse X9000] on usb-0000:07:00.0-2/input0
usb 5-1.5: New USB device found, idVendor=1b1c, idProduct=1b09
usb 5-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.5: Product: Corsair K70R Gaming Keyboard
usb 5-1.5: Manufacturer: Corsair
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.5/5-1.5:1.0/0003:1B1C:1B09.0004/input/input5
hid-generic 0003:1B1C:1B09.0004: input,hidraw3: USB HID v1.11 Keyboard [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1a.0-1.5/input0
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.5/5-1.5:1.1/0003:1B1C:1B09.0005/input/input6
hid-generic 0003:1B1C:1B09.0005: input,hidraw4: USB HID v1.11 Device [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1a.0-1.5/input1
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.5/5-1.5:1.2/0003:1B1C:1B09.0006/input/input7
systemd-journald[153]: Received SIGTERM from PID 1 (systemd).
systemd: 16 output lines suppressed due to ratelimiting
hid-generic 0003:1B1C:1B09.0006: input,hidraw5: USB HID v1.11 Keyboard [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1a.0-1.5/input2
usb 5-1.6: new full-speed USB device number 4 using ehci-pci
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
usb 5-1.6: New USB device found, idVendor=05fc, idProduct=0231
usb 5-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1.6: Product: JBL Pebbles
usb 5-1.6: Manufacturer: Harman Multimedia
usb 5-1.6: SerialNumber: 1.0.0
input: Harman Multimedia JBL Pebbles as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.6/5-1.6:1.2/0003:05FC:0231.0007/input/input8
EXT4-fs (sdg4): re-mounted. Opts: acl,user_xattr,discard
systemd-journald[477]: Received request to flush runtime journal from PID 1
clocksource: Switched to clocksource tsc
hid-generic 0003:05FC:0231.0007: input,hidraw6: USB HID v1.00 Device [Harman Multimedia JBL Pebbles] on usb-0000:00:1a.0-1.6/input2
audit: type=1400 audit(1573996667.298:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=512 comm="apparmor_parser"
audit: type=1400 audit(1573996667.310:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=520 comm="apparmor_parser"
audit: type=1400 audit(1573996667.314:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslogd" pid=525 comm="apparmor_parser"
audit: type=1400 audit(1573996667.326:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslog-ng" pid=530 comm="apparmor_parser"
audit: type=1400 audit(1573996667.330:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lessopen.sh" pid=536 comm="apparmor_parser"
audit: type=1400 audit(1573996667.338:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2" pid=541 comm="apparmor_parser"
audit: type=1400 audit(1573996667.338:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=541 comm="apparmor_parser"
audit: type=1400 audit(1573996667.338:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=541 comm="apparmor_parser"
audit: type=1400 audit(1573996667.338:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=541 comm="apparmor_parser"
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
Linux video capture interface: v2.00
input: PC Speaker as /devices/platform/pcspkr/input/input9
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
uvcvideo: Found UVC 1.00 device VF0700 Live! Cam Chat HD (041e:4088)
input: VF0700 Live! Cam Chat HD as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
asus_wmi: ASUS WMI generic driver loaded
ath: phy0: Disable PLL PowerSave
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input11
asus_wmi: Number of fans: 1
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90001600000, irq=18
ath9k 0000:06:00.0 wlan1: renamed from wlan0
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: RAPL package-0 domain package locked by BIOS
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) c8:60:00:df:21:5f
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170303/utaddress-213)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20170303/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170303/utaddress-213)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20170303/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170303/utaddress-213)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20170303/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170303/utaddress-213)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
iTCO_vendor_support: vendor-support=0
gpio_ich: GPIO from 436 to 511 on gpio_ich
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
usb 1-3: Warning! Unlikely big volume range (=5632), cval->res is probably wrong.
usb 1-3: [2] FU [Mic Capture Volume] ch = 1, val = -5632/0/1
usbcore: registered new interface driver snd-usb-audio
nct6775: Found NCT6779D or compatible chip at 0x2e:0x290
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input20
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input21
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input22
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input23
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Netfilter messages via NETLINK v0.30.
Loading iSCSI transport class v2.0-870.
ip_set: protocol 6
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
NET: Registered protocol family 17
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
resource sanity check: requesting [mem 0x000e0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window]
caller _nv030911rm+0x58/0x90 [nvidia] mapping multiple BARs
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
caller _nv000906rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs
fuse init (API version 7.26)
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
retire_capture_urb: 37 callbacks suppressed
rfkill: input handler disabled
retire_capture_urb: 5091 callbacks suppressed
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
No iBFT detected.
rfkill: input handler enabled
rfkill: input handler disabled
usb 1-1: new high-speed USB device number 4 using xhci_hcd
usb 1-1: New USB device found, idVendor=058f, idProduct=6387
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Mass Storage
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 99D819AF
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host8: usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 8:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
sd 8:0:0:0: Attached scsi generic sg7 type 0
sd 8:0:0:0: [sdh] 15730688 512-byte logical blocks: (8.05 GB/7.50 GiB)
sd 8:0:0:0: [sdh] Write Protect is off
sd 8:0:0:0: [sdh] Mode Sense: 23 00 00 00
sd 8:0:0:0: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdh: sdh1
sd 8:0:0:0: [sdh] Attached SCSI removable disk
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
TCP: eth0: Driver has suspect GRO implementation, TCP performance may be compromised.
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready