dmesg - opensslclientlfs8.4
Linux version 4.20.12 (root@LFS-8.4.TA) (gcc version 8.2.0 (GCC)) #7 SMP Sat Jul 20 11:54:41 WIB 2019
Command line: BOOT_IMAGE=/boot/vmlinuz-4.20.12-lfs-8.4 root=/dev/sda2 ro
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
random: get_random_u32 called from bsp_init_amd+0x13f/0x280 with crng_init=0
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009f68efff] usable
BIOS-e820: [mem 0x000000009f68f000-0x000000009fa8efff] reserved
BIOS-e820: [mem 0x000000009fa8f000-0x000000009fb8efff] ACPI NVS
BIOS-e820: [mem 0x000000009fb8f000-0x000000009fbfefff] ACPI data
BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
BIOS-e820: [mem 0x000000009fc00000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: Hewlett-Packard HP ENVY m6 Notebook PC/222D, BIOS F.20 09/18/2014
tsc: Fast TSC calibration using PIT
tsc: Detected 2096.062 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x21f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFE0000000 write-back
2 base 00009FB77000 mask FFFFFFFFF000 uncachable
3 base 0000FFC00000 mask FFFFFFC00000 write-protect
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000021f000000 aka 8688M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x9fc00 max_arch_pfn = 0x400000000
check: Scanning 1 areas for low memory corruption
Base memory trampoline at [(____ptrval____)] 99000 size 24576
Using GB pages for direct mapping
BRK [0x33001000, 0x33001fff] PGTABLE
BRK [0x33002000, 0x33002fff] PGTABLE
BRK [0x33003000, 0x33003fff] PGTABLE
BRK [0x33004000, 0x33004fff] PGTABLE
BRK [0x33005000, 0x33005fff] PGTABLE
BRK [0x33006000, 0x33006fff] PGTABLE
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
ACPI: XSDT 0x000000009FBFE120 0000B4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
ACPI: FACP 0x000000009FBFC000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: DSDT 0x000000009FBE8000 00F9F8 (v01 HPQOEM SLIC-MPC F0000000 ACPI 00040000)
ACPI: FACS 0x000000009FB35000 000040
ACPI: UEFI 0x000000009FBFD000 0001B6 (v01 HPQOEM 222D 00000001 HP 00040000)
ACPI: HPET 0x000000009FBFB000 000038 (v01 HPQOEM 222D 00000001 HP 00040000)
ACPI: APIC 0x000000009FBFA000 000090 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: MCFG 0x000000009FBF9000 00003C (v01 HPQOEM 222D 00000001 HP 00040000)
ACPI: ASF! 0x000000009FBF8000 0000A5 (v32 HPQOEM 222D 00000001 HP 00040000)
ACPI: BOOT 0x000000009FBE7000 000028 (v01 HPQOEM 222D 00000001 HP 00040000)
ACPI: FPDT 0x000000009FBE5000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: MSDM 0x000000009FBE4000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: SSDT 0x000000009FBE3000 000B9C (v01 HPQOEM 222D 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009FBD9000 009AC7 (v02 HPQOEM 222D 00000002 ACPI 00040000)
ACPI: CRAT 0x000000009FBD8000 000550 (v01 HPQOEM 222D 00000001 HP 00040000)
ACPI: SSDT 0x000000009FBD7000 000170 (v01 HPQOEM 222D 00000001 INTL 20111123)
ACPI: SSDT 0x000000009FBD6000 000692 (v01 HPQOEM 222D 00000001 INTL 20111123)
ACPI: SSDT 0x000000009FBD5000 000418 (v01 HPQOEM 222D 00000001 INTL 20111123)
ACPI: SSDT 0x000000009FBD3000 0013C2 (v01 HPQOEM 222D 00000001 INTL 20111123)
ACPI: SSDT 0x000000009FBD1000 001138 (v01 HPQOEM 222D 00000001 INTL 20111123)
ACPI: SSDT 0x000000009FBCF000 000FB4 (v01 HPQOEM 222D 00000001 INTL 20111123)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021effffff]
NODE_DATA(0) allocated [mem 0x21effa000-0x21effdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000009f68efff]
node 0: [mem 0x000000009fbff000-0x000000009fbfffff]
node 0: [mem 0x0000000100000000-0x000000021effffff]
Zeroed struct page in unavailable ranges: 2514 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
On node 0 totalpages: 1828398
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 10139 pages used for memmap
DMA32 zone: 648848 pages, LIFO batch:63
Normal zone: 18368 pages used for memmap
Normal zone: 1175552 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9f68f000-0x9fa8efff]
PM: Registered nosave memory: [mem 0x9fa8f000-0x9fb8efff]
PM: Registered nosave memory: [mem 0x9fb8f000-0x9fbfefff]
PM: Registered nosave memory: [mem 0x9fc00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 43 pages/cpu @(____ptrval____) s137624 r8192 d30312 u524288
pcpu-alloc: s137624 r8192 d30312 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 1799806
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.20.12-lfs-8.4 root=/dev/sda2 ro
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7105412K/7313592K available (12293K kernel code, 1243K rwdata, 2664K rodata, 1232K init, 1996K bss, 208180K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
rcu: Hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
printk: console [tty0] enabled
ACPI: Core revision 20181003
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e36a88731c, max_idle_ns: 440795269020 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4192.12 BogoMIPS (lpj=2096062)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
SELinux: Initializing.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 36K
smpboot: CPU0: AMD FX-7500 Radeon R7, 10 Compute Cores 4C+6G (family: 0x15, model: 0x30, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
MCE: In-kernel MCE decoding enabled.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
do_IRQ: 1.55 No irq handler for vector
#2
do_IRQ: 2.55 No irq handler for vector
#3
do_IRQ: 3.55 No irq handler for vector
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (16768.49 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9fa8f000-0x9fb8efff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
kworker/u8:0 (31) used greatest stack depth: 14248 bytes left
futex hash table entries: 1024 (order: 4, 65536 bytes)
RTC time: 19:00:14, date: 07/31/19
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1564599613.023:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
Simple Boot Flag at 0x44 set to 0x1
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: 9 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 6 GPEs in block 00 to 1F
ACPI: Power Resource [FN00] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME LTR]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf5ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0b1f window]
pci_bus 0000:00: root bus resource [io 0x0b40-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
pci 0000:00:01.0: [1002:1309] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xf0800000-0xf0ffffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0x4000-0x40ff]
pci 0000:00:01.0: reg 0x24: [mem 0xf0500000-0xf053ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:01.0: enabling Extended Tags
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xf0540000-0xf0543fff 64bit]
pci 0000:00:01.1: enabling Extended Tags
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
pci 0000:00:03.1: enabling Extended Tags
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.4: [1022:1426] type 01 class 0x060400
pci 0000:00:03.4: enabling Extended Tags
pci 0000:00:03.4: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xf0548000-0xf0549fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.1: reg 0x10: [mem 0xf054a000-0xf054bfff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
pci 0000:00:11.0: reg 0x24: [mem 0xf0550000-0xf05507ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xf054f000-0xf054ffff]
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xf054e000-0xf054e0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xf054d000-0xf054dfff]
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xf054c000-0xf054c0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xf0544000-0xf0547fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: enabling Extended Tags
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
pci 0000:00:15.1: enabling Extended Tags
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: PME# supported from D0 D3hot D3cold
pci 0000:00:15.3: [1022:43a3] type 01 class 0x060400
pci 0000:00:15.3: enabling Extended Tags
pci 0000:00:15.3: supports D1 D2
pci 0000:00:15.3: PME# supported from D0 D3hot D3cold
pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 0x18: [mem 0xf0400000-0xf0400fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xf0100000-0xf0103fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.1: PCI bridge to [bus 01]
pci 0000:00:03.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:03.1: bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:03.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
pci 0000:00:03.4: PCI bridge to [bus 02-05]
pci 0000:00:03.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:03.4: bridge window [mem 0xf1000000-0xf10fffff]
pci 0000:00:03.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:06: extended config space not accessible
pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0b1f window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0b40-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [168c:0036] type 00 class 0x028000
pci 0000:08:00.0: reg 0x10: [mem 0xf0300000-0xf037ffff 64bit]
pci 0000:08:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 08]
pci 0000:00:15.1: bridge window [mem 0xf0300000-0xf03fffff]
pci 0000:09:00.0: [10ec:5229] type 00 class 0xff0000
pci 0000:09:00.0: reg 0x10: [mem 0xf0200000-0xf0200fff]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D1 D2 D3hot
pci 0000:00:15.3: PCI bridge to [bus 09]
pci 0000:00:15.3: bridge window [mem 0xf0200000-0xf02fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:00:01.0: vgaarb: setting as boot VGA device
pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:01.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
e820: reserve RAM buffer [mem 0x9f68f000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xfec20000-0xfec20fff] could not be reserved
system 00:00: [mem 0xff800000-0xff800fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs SYN1eb6 PNP0f13 (active)
system 00:04: [io 0x0400-0x04cf] has been reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0680-0x06ff] has been reserved
system 00:04: [io 0x077a] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cdb] has been reserved
system 00:04: [io 0x0840-0x0847] has been reserved
system 00:04: [io 0x0500-0x05fe] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: address conflict with Reserved [mem 0xffc00000-0xffffffff]
pci 0000:08:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:01.0: BAR 6: assigned [mem 0xf0560000-0xf057ffff pref]
pci 0000:00:03.1: PCI bridge to [bus 01]
pci 0000:00:03.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:03.1: bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:03.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
pci 0000:00:03.4: PCI bridge to [bus 02-05]
pci 0000:00:03.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:03.4: bridge window [mem 0xf1000000-0xf10fffff]
pci 0000:00:03.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 06]
pci 0000:00:15.0: PCI bridge to [bus 07]
pci 0000:08:00.0: BAR 6: assigned [mem 0xf0380000-0xf038ffff pref]
pci 0000:00:15.1: PCI bridge to [bus 08]
pci 0000:00:15.1: bridge window [mem 0xf0300000-0xf03fffff]
pci 0000:00:15.3: PCI bridge to [bus 09]
pci 0000:00:15.3: bridge window [mem 0xf0200000-0xf02fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0b1f window]
pci_bus 0000:00: resource 5 [io 0x0b40-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 9 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 10 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:00: resource 20 [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:00: resource 21 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf0400000-0xf04fffff]
pci_bus 0000:01: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf1000000-0xf10fffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:06: resource 4 [io 0x0000-0x0b1f window]
pci_bus 0000:06: resource 5 [io 0x0b40-0x0cf7 window]
pci_bus 0000:06: resource 6 [io 0x0d00-0xffff window]
pci_bus 0000:06: resource 7 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:06: resource 8 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:06: resource 9 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:06: resource 10 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:06: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:06: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:06: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:06: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:06: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:06: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:06: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:06: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:06: resource 19 [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:06: resource 20 [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:06: resource 21 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:08: resource 1 [mem 0xf0300000-0xf03fffff]
pci_bus 0000:09: resource 1 [mem 0xf0200000-0xf02fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:01.1: Linked as a consumer to 0000:00:01.0
pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x67e took 11669 usecs
pci 0000:00:12.2: PME# does not work under D3, disabling it
pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x67e took 12259 usecs
pci 0000:00:13.2: PME# does not work under D3, disabling it
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x9b68f000-0x9f68f000] (64MB)
amd_uncore: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000001ff)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=56 max_order=21 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
acpi device:00: registered as cooling_device1
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (67 C)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
battery: ACPI: Battery Slot [BAT0] (battery present)
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0xb impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xf0550000 port 0xf0550100 irq 24
ata2: SATA max UDMA/133 abar m2048@0xf0550000 port 0xf0550180 irq 24
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf0550000 port 0xf0550280 irq 24
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
sky2: driver version 1.30
libphy: r8169: probed
r8169 0000:01:00.0 eth0: RTL8168g/8111g, ec:b1:d7:93:ac:7f, XID 4c000800, IRQ 26
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xf054e000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.20.12 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xf054c000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.20.12 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 18, io mem 0xf054f000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.20
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 4.20.12 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.0: irq 18, io mem 0xf054d000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.20
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.20.12 ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000418
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.20.12 xhci-hcd
usb usb5: SerialNumber: 0000:00:10.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.20.12 xhci-hcd
usb usb6: SerialNumber: 0000:00:10.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7
xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000418
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 4.20.12 xhci-hcd
usb usb7: SerialNumber: 0000:00:10.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
xhci_hcd 0000:00:10.1: Host supports USB 3.0 SuperSpeed
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.20.12 xhci-hcd
usb usb8: SerialNumber: 0000:00:10.1
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usb-storage
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
Key type dns_resolver registered
hdaudio hdaudioC0D0: Unable to bind the codec
microcode: CPU0: patch_level=0x06003106
microcode: CPU1: patch_level=0x06003106
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
microcode: CPU2: patch_level=0x06003106
microcode: CPU3: patch_level=0x06003106
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1180780780, 17856722)->(5931004039, -4732366537)
registered taskstats version 1
Loading compiled-in X.509 certificates
Magic number: 11:314:42
bdi 7:7: hash matches
printk: console [netcon0] enabled
netconsole: network logging started
hdaudio hdaudioC1D0: Unable to bind the codec
acpi_cpufreq: overriding BIOS provided _PSD data
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
ALSA device list:
No soundcards found.
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
random: fast init done
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: TOSHIBA MQ01ABD075, AX1P2C, max UDMA/100
ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0 2C PQ: 0 ANSI: 5
usb 7-1: new full-speed USB device number 2 using xhci_hcd
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 4-4: new full-speed USB device number 2 using ohci-pci
usb 3-1: new full-speed USB device number 2 using ohci-pci
sda: sda1 sda2
kworker/u8:1 (1276) used greatest stack depth: 14184 bytes left
sd 0:0:0:0: [sda] Attached SCSI disk
usb 7-1: New USB device found, idVendor=0458, idProduct=6001, bcdDevice=10.01
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: Wireless Device
usb 7-1: Manufacturer: Genius
input: Genius Wireless Device as /devices/pci0000:00/0000:00:10.1/usb7/7-1/7-1:1.0/0003:0458:6001.0001/input/input7
hid-generic 0003:0458:6001.0001: input,hidraw0: USB HID v1.01 Mouse [Genius Wireless Device] on usb-0000:00:10.1-1/input0
input: Genius Wireless Device System Control as /devices/pci0000:00/0000:00:10.1/usb7/7-1/7-1:1.1/0003:0458:6001.0002/input/input8
input: Genius Wireless Device Consumer Control as /devices/pci0000:00/0000:00:10.1/usb7/7-1/7-1:1.1/0003:0458:6001.0002/input/input9
input: Genius Wireless Device as /devices/pci0000:00/0000:00:10.1/usb7/7-1/7-1:1.1/0003:0458:6001.0002/input/input10
hid-generic 0003:0458:6001.0002: input,hiddev96,hidraw1: USB HID v1.01 Device [Genius Wireless Device] on usb-0000:00:10.1-1/input1
input: Genius Wireless Device as /devices/pci0000:00/0000:00:10.1/usb7/7-1/7-1:1.2/0003:0458:6001.0003/input/input11
hid-generic 0003:0458:6001.0003: input,hidraw2: USB HID v1.01 Keyboard [Genius Wireless Device] on usb-0000:00:10.1-1/input2
usb 3-1: New USB device found, idVendor=0eef, idProduct=a103, bcdDevice=23.05
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: eGalaxTouch EXC7910-1023-12.00.00
usb 3-1: Manufacturer: eGalax Inc.
input: eGalax Inc. eGalaxTouch EXC7910-1023-12.00.00 Touchscreen as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:0EEF:A103.0004/input/input12
hid-generic 0003:0EEF:A103.0004: input,hiddev97,hidraw3: USB HID v2.10 Device [eGalax Inc. eGalaxTouch EXC7910-1023-12.00.00] on usb-0000:00:12.0-1/input0
usb 4-4: New USB device found, idVendor=0cf3, idProduct=3121, bcdDevice= 0.01
usb 4-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
psmouse serio1: synaptics: queried max coordinates: x [..5610], y [..4700]
tsc: Refined TSC clocksource calibration: 2096.084 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e36bd4139e, max_idle_ns: 440795242263 ns
clocksource: Switched to clocksource tsc
psmouse serio1: synaptics: queried min coordinates: x [1362..], y [1238..]
psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x12e800/0x0, board id: 2960, fw id: 1577805
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
usb 1-2: new high-speed USB device number 3 using ehci-pci
devtmpfs: mounted
Freeing unused kernel image memory: 1232K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel image memory: 2012K
Freeing unused kernel image memory: 1432K
Run /sbin/init as init process
usb 1-2: device descriptor read/all, error -71
usb 1-2: new high-speed USB device number 4 using ehci-pci
usb 1-2: unable to read config index 0 descriptor/start: -32
usb 1-2: chopping to 0 config(s)
usb 1-2: New USB device found, idVendor=05c8, idProduct=036e, bcdDevice= 1.06
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: HP Truevision HD
usb 1-2: Manufacturer: SunplusIT INC.
usb 1-2: no configuration chosen from 0 choices
random: crng init done
stty (1343) used greatest stack depth: 13856 bytes left
dmesg (1344) used greatest stack depth: 13816 bytes left
ip (1396) used greatest stack depth: 13368 bytes left
ip (1397) used greatest stack depth: 12296 bytes left
udevd[1422]: starting version 3.2.7
udevd[1423]: starting eudev-3.2.7
r8169 0000:01:00.0 eno1: renamed from eth0
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (KAVERI 0x1002:0x1309 0x103C:0x222D 0x00).
[drm] doorbell mmio base: 0xF0800000
[drm] doorbell mmio size: 8388608
resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
caller pci_map_rom+0x65/0x1b0 mapping multiple BARs
ATOM BIOS: 113
[drm] Changing default dispclk from 533Mhz to 600Mhz
radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 3555062 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading kaveri Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
radeon 0000:00:01.0: Direct firmware load for radeon/bonaire_uvd.bin failed with error -2
radeon 0000:00:01.0: radeon_uvd: Can't load firmware "radeon/bonaire_uvd.bin"
radeon 0000:00:01.0: Direct firmware load for radeon/BONAIRE_uvd.bin failed with error -2
radeon 0000:00:01.0: radeon_uvd: Can't load firmware "radeon/BONAIRE_uvd.bin"
radeon 0000:00:01.0: failed UVD (-2) init.
radeon 0000:00:01.0: Direct firmware load for radeon/BONAIRE_vce.bin failed with error -2
radeon 0000:00:01.0: radeon_vce: Can't load firmware "radeon/BONAIRE_vce.bin"
radeon 0000:00:01.0: failed VCE (-2) init.
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x000000009c8a833f
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0x00000000a33ddeb4
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0x0000000098a14e22
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0000000076d5d802
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0x00000000d6b74f13
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 2 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 5 usecs
[drm] ring test on 4 succeeded in 5 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] eDP-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] fb mappable at 0xE0454000
[drm] vram apper at 0xE0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
Adding 10485756k swap on /dev/sda1. Priority:1 extents:1 across:10485756k
EXT4-fs (sda2): re-mounted. Opts: barrier=1
EXT4-fs (sda2): re-mounted. Opts: barrier=1
r8169 0000:01:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2
r8169 0000:01:00.0 eno1: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-2)
Generic PHY r8169-100:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
ip (2926) used greatest stack depth: 11592 bytes left
r8169 0000:01:00.0 eno1: Link is Up - 100Mbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready