dmesg - dynanet-proxmox-02-iozone-lxc-zfs
Linux version 4.15.18-17-pve (build@pve) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP PVE 4.15.18-43 (Tue, 25 Jun 2019 17:59:49 +0200) ()
Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.18-17-pve root=/dev/mapper/pve-root ro quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000deb58fff] usable
BIOS-e820: [mem 0x00000000deb59000-0x00000000debcbfff] type 20
BIOS-e820: [mem 0x00000000debcc000-0x00000000debfbfff] reserved
BIOS-e820: [mem 0x00000000debfc000-0x00000000dec10fff] type 20
BIOS-e820: [mem 0x00000000dec11000-0x00000000df13afff] reserved
BIOS-e820: [mem 0x00000000df13b000-0x00000000df38dfff] ACPI NVS
BIOS-e820: [mem 0x00000000df38e000-0x00000000df39afff] ACPI data
BIOS-e820: [mem 0x00000000df39b000-0x00000000df3bafff] ACPI NVS
BIOS-e820: [mem 0x00000000df3bb000-0x00000000df3bffff] ACPI data
BIOS-e820: [mem 0x00000000df3c0000-0x00000000df402fff] ACPI NVS
BIOS-e820: [mem 0x00000000df403000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xdf38e000 ACPI 2.0=0xdf38e000 SMBIOS=0xdec23e98 MPS=0xfc9b0
secureboot: Secure boot could not be determined (mode 0)
SMBIOS 2.6 present.
DMI: System manufacturer System Product Name/P8B WS, BIOS 2301 07/16/2018
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DFFFF uncachable
E0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FF0000000 write-back
2 base 410000000 mask FF8000000 write-back
3 base 418000000 mask FFC000000 write-back
4 base 41C000000 mask FFE000000 write-back
5 base 41E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 16368M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcda0-0x000fcdaf] mapped at [ (ptrval)]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 98000 size 24576
BRK [0x118f45000, 0x118f45fff] PGTABLE
BRK [0x118f46000, 0x118f46fff] PGTABLE
BRK [0x118f47000, 0x118f47fff] PGTABLE
BRK [0x118f48000, 0x118f48fff] PGTABLE
BRK [0x118f49000, 0x118f49fff] PGTABLE
BRK [0x118f4a000, 0x118f4afff] PGTABLE
BRK [0x118f4b000, 0x118f4bfff] PGTABLE
BRK [0x118f4c000, 0x118f4cfff] PGTABLE
BRK [0x118f4d000, 0x118f4dfff] PGTABLE
BRK [0x118f4e000, 0x118f4efff] PGTABLE
BRK [0x118f4f000, 0x118f4ffff] PGTABLE
RAMDISK: [mem 0x339fd000-0x35cf5fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DF38E000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DF38E078 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DF399348 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DF38E170 00B1D2 (v02 ALASKA A M I 00000015 INTL 20051117)
ACPI: FACS 0x00000000DF3B9F80 000040
ACPI: APIC 0x00000000DF399440 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DF3994B8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DF3994F8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DF399530 000460 (v01 IdeRef IdeTable 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DF399990 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DF39A340 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: DMAR 0x00000000DF39ADD8 000078 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041effffff]
NODE_DATA(0) allocated [mem 0x41efca000-0x41eff4fff]
tsc: Fast TSC calibration using PIT
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000deb58fff]
node 0: [mem 0x00000000df403000-0x00000000df7fffff]
node 0: [mem 0x0000000100000000-0x000000041effffff]
Reserved but unavailable: 4364 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
On node 0 totalpages: 4185844
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14206 pages used for memmap
DMA32 zone: 909142 pages, LIFO batch:31
Normal zone: 51136 pages used for memmap
Normal zone: 3272704 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdeb59000-0xdebcbfff]
PM: Registered nosave memory: [mem 0xdebcc000-0xdebfbfff]
PM: Registered nosave memory: [mem 0xdebfc000-0xdec10fff]
PM: Registered nosave memory: [mem 0xdec11000-0xdf13afff]
PM: Registered nosave memory: [mem 0xdf13b000-0xdf38dfff]
PM: Registered nosave memory: [mem 0xdf38e000-0xdf39afff]
PM: Registered nosave memory: [mem 0xdf39b000-0xdf3bafff]
PM: Registered nosave memory: [mem 0xdf3bb000-0xdf3bffff]
PM: Registered nosave memory: [mem 0xdf3c0000-0xdf402fff]
PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
random: get_random_bytes called from start_kernel+0x99/0x511 with crng_init=0
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 4120411
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.18-17-pve root=/dev/mapper/pve-root ro quiet
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16164036K/16743376K available (12300K kernel code, 2481K rwdata, 4312K rodata, 2420K init, 2416K bss, 579340K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 39776 entries in 156 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI: 4 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f010da
DMAR: RMRR base: 0x000000df0d0000 end: 0x000000df0defff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 3300.082 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6600.16 BogoMIPS (lpj=13200328)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 36K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (26400.65 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xdf13b000-0xdf38dfff] (2437120 bytes)
PM: Registering ACPI NVS region [mem 0xdf39b000-0xdf3bafff] (131072 bytes)
PM: Registering ACPI NVS region [mem 0xdf3c0000-0xdf402fff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 10:49:38, date: 07/07/19
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1562496578.048:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9BF94C16A000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9BF94BC02000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9BF94C337C00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 10 GPEs in block 00 to 3F
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:0105] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [8086:010d] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf780a000-0xf780a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7807000-0xf78073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7800000-0xf7803fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7806000-0xf78063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1c56] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io 0xf090-0xf09f]
pci 0000:00:1f.2: reg 0x24: [io 0xf080-0xf08f]
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7805000-0xf78050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.5: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.5: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.5: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.5: reg 0x20: [io 0xf030-0xf03f]
pci 0000:00:1f.5: reg 0x24: [io 0xf020-0xf02f]
pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: BAR 3: assigned to efifb
pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:02:00.0: [1000:0072] type 00 class 0x010700
pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x14: [mem 0xf77c0000-0xf77c3fff 64bit]
pci 0000:02:00.0: reg 0x1c: [mem 0xf7780000-0xf77bffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xf7700000-0xf777ffff pref]
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0003ffff 64bit] (contains BAR0 for 16 VFs)
pci 0000:02:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit]
pci 0000:02:00.0: VF(n) BAR2 space: [mem 0x00000000-0x003fffff 64bit] (contains BAR2 for 16 VFs)
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.1: bridge window [mem 0xf7700000-0xf77fffff]
pci 0000:03:00.0: [8086:1516] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xf7200000-0xf727ffff]
pci 0000:03:00.0: reg 0x1c: [mem 0xf7284000-0xf7287fff]
pci 0000:03:00.0: reg 0x30: [mem 0xf7180000-0xf71fffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: [8086:1516] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xf7100000-0xf717ffff]
pci 0000:03:00.1: reg 0x1c: [mem 0xf7280000-0xf7283fff]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [mem 0xf7100000-0xf72fffff]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xf7600000-0xf761ffff]
pci 0000:05:00.0: reg 0x18: [io 0xc000-0xc01f]
pci 0000:05:00.0: reg 0x1c: [mem 0xf7620000-0xf7623fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xf7500000-0xf751ffff]
pci 0000:06:00.0: reg 0x18: [io 0xb000-0xb01f]
pci 0000:06:00.0: reg 0x1c: [mem 0xf7520000-0xf7523fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.6: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xf7400000-0xf7407fff 64bit]
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [mem 0xf7400000-0xf74fffff]
pci 0000:08:03.0: [1106:3044] type 00 class 0x0c0010
pci 0000:08:03.0: reg 0x10: [mem 0xf7300000-0xf73007ff]
pci 0000:08:03.0: reg 0x14: [io 0xa000-0xa07f]
pci 0000:08:03.0: supports D2
pci 0000:08:03.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
pci 0000:00:1e.0: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xdeb59000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x0200-0x020f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] has been reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf2000000-0xf2000fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf2100000-0xf22fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf2300000-0xf24fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:02:00.0: BAR 9: no space for [mem size 0x00400000 64bit]
pci 0000:02:00.0: BAR 9: failed to assign [mem size 0x00400000 64bit]
pci 0000:02:00.0: BAR 7: no space for [mem size 0x00040000 64bit]
pci 0000:02:00.0: BAR 7: failed to assign [mem size 0x00040000 64bit]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.1: bridge window [mem 0xf7700000-0xf77fffff]
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [mem 0xf7100000-0xf72fffff]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf2100000-0xf22fffff]
pci 0000:00:1c.0: bridge window [mem 0xf2300000-0xf24fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.6: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [mem 0xf7400000-0xf74fffff]
pci 0000:00:1e.0: PCI bridge to [bus 08]
pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
pci 0000:00:1e.0: bridge window [mem 0xf7300000-0xf73fffff]
pci_bus 0000:00: No. 2 try to assign unassigned res
release child resource [mem 0xf7700000-0xf777ffff pref]
release child resource [mem 0xf7780000-0xf77bffff 64bit]
release child resource [mem 0xf77c0000-0xf77c3fff 64bit]
pci 0000:00:01.1: resource 14 [mem 0xf7700000-0xf77fffff] released
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [mem 0x00100000-0x001fffff] to [bus 02] add_size 500000 add_align 100000
pci 0000:00:01.1: BAR 14: assigned [mem 0xf2500000-0xf2afffff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xf2500000-0xf257ffff pref]
pci 0000:02:00.0: BAR 3: assigned [mem 0xf2580000-0xf25bffff 64bit]
pci 0000:02:00.0: BAR 9: assigned [mem 0xf25c0000-0xf29bffff 64bit]
pci 0000:02:00.0: BAR 1: assigned [mem 0xf29c0000-0xf29c3fff 64bit]
pci 0000:02:00.0: BAR 7: assigned [mem 0xf29c4000-0xf2a03fff 64bit]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.1: bridge window [mem 0xf2500000-0xf2afffff]
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [mem 0xf7100000-0xf72fffff]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf2100000-0xf22fffff]
pci 0000:00:1c.0: bridge window [mem 0xf2300000-0xf24fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.6: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [mem 0xf7400000-0xf74fffff]
pci 0000:00:1e.0: PCI bridge to [bus 08]
pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
pci 0000:00:1e.0: bridge window [mem 0xf7300000-0xf73fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf2500000-0xf2afffff]
pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf72fffff]
pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0xf2100000-0xf22fffff]
pci_bus 0000:04: resource 2 [mem 0xf2300000-0xf24fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xf7600000-0xf76fffff]
pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:06: resource 1 [mem 0xf7500000-0xf75fffff]
pci_bus 0000:07: resource 1 [mem 0xf7400000-0xf74fffff]
pci_bus 0000:08: resource 0 [io 0xa000-0xafff]
pci_bus 0000:08: resource 1 [mem 0xf7300000-0xf73fffff]
pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:08: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:08: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:08: resource 9 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:08: resource 10 [mem 0xe0000000-0xfeafffff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 35812K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdab59000-0xdeb59000] (64MB) mapped at [ (ptrval)- (ptrval)]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
efifb: probing for efifb
efifb: framebuffer at 0xf1000000, using 1920k, total 1920k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19
ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7807000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.18-17-pve ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7806000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.18-17-pve ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:07:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.15.18-17-pve xhci-hcd
usb usb3: SerialNumber: 0000:07:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:07:00.0: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.15.18-17-pve xhci-hcd
usb usb4: SerialNumber: 0000:07:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Bridge firewalling registered
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x206a7, pf=0x2, revision=0x2e
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1386524258, 0)->(1369511079, 17013179)
registered taskstats version 1
Loading compiled-in X.509 certificates
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI db list
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI MokListRT
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI dbx list
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
ima: Allocated hash algorithm: sha1
evm: HMAC attrs: 0x1
Magic number: 11:378:830
rtc_cmos 00:02: setting system clock to 2019-07-07 10:49:40 UTC (1562496580)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
tsc: Refined TSC clocksource calibration: 3300.023 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f91626a655, max_idle_ns: 440795305688 ns
ata2.00: failed to resume link (SControl 30)
ata1.01: failed to resume link (SControl 0)
ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5
sd 0:0:0:0: [sda] Attached SCSI disk
clocksource: Switched to clocksource tsc
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link down (SStatus 4 SControl 30)
ata2.01: SATA link down (SStatus 0 SControl 0)
Freeing unused kernel image memory: 2420K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1832K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
dca service started, version 1.12.1
igb: loading out-of-tree module taints kernel.
mpt3sas version 17.100.00.00 loaded
mpt3sas 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
Intel(R) Gigabit Ethernet Linux Driver - version 5.3.5.18
Copyright(c) 2007 - 2018 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 3.4.1.1-NAPI
e1000e: Copyright(c) 1999 - 2018 Intel Corporation.
e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (16392488 kB)
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
firewire_ohci 0000:08:03.0: enabling device (0000 -> 0003)
mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 4, max_msix_vectors: -1
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 35
mpt2sas_cm0: iomem(0x00000000f29c0000), mapped(0x (ptrval)), size(16384)
mpt2sas_cm0: ioport(0x000000000000d000), size(256)
e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock
firewire_ohci 0000:08:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
igb 0000:03:00.0: added PHC on eth0
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Linux Driver
igb 0000:03:00.0: eth0: (PCIe:5.0GT/s:Width x4)
igb 0000:03:00.0 eth0: MAC: 90:e2:ba:1a:b3:2e
igb 0000:03:00.0: eth0: PBA No: E81605-007
igb 0000:03:00.0: LRO is disabled
igb 0000:03:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
e1000e 0000:05:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 54:04:a6:b9:b8:1f
e1000e 0000:05:00.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:05:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
mpt2sas_cm0: Allocated physical memory: size(7579 kB)
mpt2sas_cm0: Current Controller Queue Depth(3364),Max Controller Queue Depth(3432)
mpt2sas_cm0: Scatter Gather Elements per IO(128)
e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock
mpt2sas_cm0: LSISAS2008: FWVersion(20.00.07.00), ChipRevision(0x03), BiosVersion(00.00.00.00)
mpt2sas_cm0: Protocol=(
Initiator
,Target
),
Capabilities=(
TLR
,EEDP
,Snapshot Buffer
,Diag Trace Buffer
,Task Set Full
,NCQ
)
scsi host4: Fusion MPT SAS Host
mpt2sas_cm0: sending port enable !!
igb 0000:03:00.1: added PHC on eth2
igb 0000:03:00.1: Intel(R) Gigabit Ethernet Linux Driver
igb 0000:03:00.1: eth2: (PCIe:5.0GT/s:Width x4)
igb 0000:03:00.1 eth2: MAC: 90:e2:ba:1a:b3:2f
igb 0000:03:00.1: eth2: PBA No: E81605-007
igb 0000:03:00.1: LRO is disabled
igb 0000:03:00.1: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
igb 0000:03:00.0 enp3s0f0: renamed from eth0
igb 0000:03:00.1 enp3s0f1: renamed from eth2
e1000e 0000:06:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 56:04:a6:b9:b8:2f
e1000e 0000:06:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:06:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:05:00.0 enp5s0: renamed from eth1
e1000e 0000:06:00.0 enp6s0: renamed from eth0
firewire_core 0000:08:03.0: created device fw0: GUID 001e8c000044f9cb, S400
mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x500605b007c663a0), phys(8)
scsi 4:0:0:0: Direct-Access ATA Hitachi HDS72101 A3EA PQ: 0 ANSI: 6
scsi 4:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221104000000), phy(4), device_name(0x0000000000000000)
scsi 4:0:0:0: enclosure logical id (0x500605b007c663a0), slot(4)
scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 4:0:1:0: Direct-Access ATA Hitachi HDS72101 A3EA PQ: 0 ANSI: 6
scsi 4:0:1:0: SATA: handle(0x000a), sas_addr(0x4433221105000000), phy(5), device_name(0x0000000000000000)
scsi 4:0:1:0: enclosure logical id (0x500605b007c663a0), slot(5)
scsi 4:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 4:0:2:0: Direct-Access ATA Hitachi HDS72101 A3EA PQ: 0 ANSI: 6
scsi 4:0:2:0: SATA: handle(0x000b), sas_addr(0x4433221106000000), phy(6), device_name(0x0000000000000000)
scsi 4:0:2:0: enclosure logical id (0x500605b007c663a0), slot(6)
scsi 4:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
random: fast init done
scsi 4:0:3:0: Direct-Access ATA Hitachi HDS72101 A3EA PQ: 0 ANSI: 6
scsi 4:0:3:0: SATA: handle(0x000c), sas_addr(0x4433221107000000), phy(7), device_name(0x0000000000000000)
scsi 4:0:3:0: enclosure logical id (0x500605b007c663a0), slot(7)
scsi 4:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
mpt2sas_cm0: port enable: SUCCESS
sd 4:0:0:0: Power-on or device reset occurred
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:1:0: Power-on or device reset occurred
sd 4:0:1:0: Attached scsi generic sg2 type 0
sd 4:0:2:0: Power-on or device reset occurred
sd 4:0:2:0: Attached scsi generic sg3 type 0
sd 4:0:3:0: Power-on or device reset occurred
sd 4:0:3:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 4:0:1:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 4:0:2:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 4:0:3:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 4:0:3:0: [sde] Write Protect is off
sd 4:0:3:0: [sde] Mode Sense: 7f 00 10 08
sd 4:0:1:0: [sdc] Write Protect is off
sd 4:0:1:0: [sdc] Mode Sense: 7f 00 10 08
sd 4:0:3:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 4:0:2:0: [sdd] Write Protect is off
sd 4:0:2:0: [sdd] Mode Sense: 7f 00 10 08
sd 4:0:2:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 7f 00 10 08
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sde: sde1 sde9
sdb: sdb1 sdb9
sdc: sdc1 sdc9
sdd: sdd1 sdd9
sd 4:0:3:0: [sde] Attached SCSI disk
sd 4:0:1:0: [sdc] Attached SCSI disk
sd 4:0:0:0: [sdb] Attached SCSI disk
sd 4:0:2:0: [sdd] Attached SCSI disk
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
raid6: sse2x1 gen() 9489 MB/s
raid6: sse2x1 xor() 7371 MB/s
raid6: sse2x2 gen() 11896 MB/s
raid6: sse2x2 xor() 8594 MB/s
raid6: sse2x4 gen() 13870 MB/s
raid6: sse2x4 xor() 10495 MB/s
raid6: using algorithm sse2x4 gen() 13870 MB/s
raid6: .... xor() 10495 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on udev Kernel Socket.
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
SPL: Loaded module v0.7.13-1
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
systemd-journald[328]: Received request to flush runtime journal from PID 1
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000050F (\_GPE.GPIO) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: PC Speaker as /devices/platform/pcspkr/input/input5
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
Error: Driver 'pcspkr' is already registered, aborting...
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
checking generic (f1000000 1e0000) vs hw (e0000000 10000000)
checking generic (f1000000 1e0000) vs hw (f0000000 2000000)
fb: switching to nouveaufb from EFI VGA
Console: switching to colour dummy device 80x25
nouveau 0000:01:00.0: NVIDIA GT218 (0a8280b1)
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
asus_wmi: Number of fans: 1
Adding 2490364k swap on /dev/mapper/pve-swap. Priority:-2 extents:1 across:2490364k SSFS
nouveau 0000:01:00.0: bios: version 70.18.64.00.1c
nouveau 0000:01:00.0: fb: 1024 MiB DDR3
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
ZFS: Loaded module v0.7.13-pve1~bpo1, ZFS pool version 5000, ZFS filesystem version 5
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[TTM] Zone kernel: Available graphics memory: 8196244 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.0
nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030
nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000
nouveau 0000:01:00.0: DRM: DCB outp 02: 08011382 00020010
nouveau 0000:01:00.0: DRM: DCB outp 03: 01011380 00000000
nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
nouveau 0000:01:00.0: DRM: DCB conn 01: 00002130
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[drm] Cannot find any crtc or sizes
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[drm] Cannot find any crtc or sizes
[drm] Cannot find any crtc or sizes
zd16: p1
zd32: p1 p2
Netfilter messages via NETLINK v0.30.
audit: type=1400 audit(1562496598.087:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1330 comm="apparmor_parser"
audit: type=1400 audit(1562496598.091:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=1329 comm="apparmor_parser"
audit: type=1400 audit(1562496598.091:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=1329 comm="apparmor_parser"
audit: type=1400 audit(1562496598.091:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=1329 comm="apparmor_parser"
audit: type=1400 audit(1562496598.091:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=1329 comm="apparmor_parser"
zd48: p1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
bonding: bond1 is being created...
softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
bond1: Enslaving enp3s0f0 as a backup interface with a down link
new mount options do not match the existing superblock, will be ignored
bond1: Enslaving enp3s0f1 as a backup interface with a down link
vmbr0: port 1(bond0) entered blocking state
vmbr0: port 1(bond0) entered disabled state
device bond0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): vmbr0: link is not ready
vmbr0: port 1(bond0) entered disabled state
device enp5s0 entered promiscuous mode
bond0: Enslaving enp5s0 as a backup interface with a down link
device enp6s0 entered promiscuous mode
bond0: Enslaving enp6s0 as a backup interface with a down link
audit: type=1400 audit(1562496598.571:7): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/bin/lxc-start" pid=1917 comm="apparmor_parser"
audit: type=1400 audit(1562496598.579:8): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default" pid=1925 comm="apparmor_parser"
audit: type=1400 audit(1562496598.579:9): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-cgns" pid=1925 comm="apparmor_parser"
audit: type=1400 audit(1562496598.579:10): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-mounting" pid=1925 comm="apparmor_parser"
audit: type=1400 audit(1562496598.579:11): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-nesting" pid=1925 comm="apparmor_parser"
igb 0000:03:00.1 enp3s0f1: igb: enp3s0f1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
bond1: link status definitely up for interface enp3s0f1, 1000 Mbps full duplex
bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond
bond1: first active interface up!
IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready
e1000e: enp6s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
e1000e: enp5s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
bond0: link status definitely up for interface enp5s0, 1000 Mbps full duplex
bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond
bond0: first active interface up!
bond0: link status definitely up for interface enp6s0, 1000 Mbps full duplex
vmbr0: port 1(bond0) entered blocking state
vmbr0: port 1(bond0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): vmbr0: link becomes ready
igb 0000:03:00.0 enp3s0f0: igb: enp3s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
bond1: link status definitely up for interface enp3s0f0, 1000 Mbps full duplex
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_set: protocol 6
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1562496610.107:12): apparmor="STATUS" operation="profile_load" profile="/usr/bin/lxc-start" name="lxc-1113_" pid=2649 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): veth1113i0: link is not ready
vmbr0: port 2(veth1113i0) entered blocking state
vmbr0: port 2(veth1113i0) entered disabled state
device veth1113i0 entered promiscuous mode
eth0: renamed from vethULCDFC
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
vmbr0: port 2(veth1113i0) entered blocking state
vmbr0: port 2(veth1113i0) entered forwarding state
audit: type=1400 audit(1562497671.994:13): apparmor="STATUS" operation="profile_load" profile="/usr/bin/lxc-start" name="lxc-1111_" pid=15611 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): veth1111i0: link is not ready
vmbr0: port 3(veth1111i0) entered blocking state
vmbr0: port 3(veth1111i0) entered disabled state
device veth1111i0 entered promiscuous mode
eth0: renamed from veth6DM0NB
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
vmbr0: port 3(veth1111i0) entered blocking state
vmbr0: port 3(veth1111i0) entered forwarding state
vmbr0: port 3(veth1111i0) entered disabled state
audit: type=1400 audit(1562497812.006:14): apparmor="STATUS" operation="profile_remove" profile="/usr/bin/lxc-start" name="lxc-1111_" pid=18227 comm="apparmor_parser"
vmbr0: port 3(veth1111i0) entered disabled state
device veth1111i0 left promiscuous mode
vmbr0: port 3(veth1111i0) entered disabled state
audit: type=1400 audit(1562497832.238:15): apparmor="STATUS" operation="profile_load" profile="/usr/bin/lxc-start" name="lxc-1111_" pid=18430 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): veth1111i0: link is not ready
vmbr0: port 3(veth1111i0) entered blocking state
vmbr0: port 3(veth1111i0) entered disabled state
device veth1111i0 entered promiscuous mode
eth0: renamed from vethUOM7Y5
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
vmbr0: port 3(veth1111i0) entered blocking state
vmbr0: port 3(veth1111i0) entered forwarding state
audit: type=1400 audit(1562498499.700:16): apparmor="STATUS" operation="profile_remove" profile="/usr/bin/lxc-start" name="lxc-1113_" pid=15730 comm="apparmor_parser"
vmbr0: port 2(veth1113i0) entered disabled state
device veth1113i0 left promiscuous mode
vmbr0: port 2(veth1113i0) entered disabled state
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1562499374.926:17): apparmor="STATUS" operation="profile_load" profile="/usr/bin/lxc-start" name="lxc-1113_" pid=28112 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): veth1113i0: link is not ready
vmbr0: port 2(veth1113i0) entered blocking state
vmbr0: port 2(veth1113i0) entered disabled state
device veth1113i0 entered promiscuous mode
eth0: renamed from vethF1KURE
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
vmbr0: port 2(veth1113i0) entered blocking state
vmbr0: port 2(veth1113i0) entered forwarding state
audit: type=1400 audit(1562499709.545:18): apparmor="STATUS" operation="profile_remove" profile="/usr/bin/lxc-start" name="lxc-1113_" pid=24455 comm="apparmor_parser"
vmbr0: port 2(veth1113i0) entered disabled state
device veth1113i0 left promiscuous mode
vmbr0: port 2(veth1113i0) entered disabled state
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1562499712.769:19): apparmor="STATUS" operation="profile_load" profile="/usr/bin/lxc-start" name="lxc-1113_" pid=24798 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): veth1113i0: link is not ready
vmbr0: port 2(veth1113i0) entered blocking state
vmbr0: port 2(veth1113i0) entered disabled state
device veth1113i0 entered promiscuous mode
eth0: renamed from vethKAKJDV
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
vmbr0: port 2(veth1113i0) entered blocking state
vmbr0: port 2(veth1113i0) entered forwarding state
audit: type=1400 audit(1562500219.676:20): apparmor="STATUS" operation="profile_remove" profile="/usr/bin/lxc-start" name="lxc-1113_" pid=22277 comm="apparmor_parser"
vmbr0: port 2(veth1113i0) entered disabled state
device veth1113i0 left promiscuous mode
vmbr0: port 2(veth1113i0) entered disabled state
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1562501676.859:21): apparmor="STATUS" operation="profile_load" profile="/usr/bin/lxc-start" name="lxc-1113_" pid=9352 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): veth1113i0: link is not ready
vmbr0: port 2(veth1113i0) entered blocking state
vmbr0: port 2(veth1113i0) entered disabled state
device veth1113i0 entered promiscuous mode
eth0: renamed from veth8N1BYM
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
vmbr0: port 2(veth1113i0) entered blocking state
vmbr0: port 2(veth1113i0) entered forwarding state
audit: type=1400 audit(1562502150.573:22): apparmor="STATUS" operation="profile_remove" profile="/usr/bin/lxc-start" name="lxc-1113_" pid=1389 comm="apparmor_parser"
vmbr0: port 2(veth1113i0) entered disabled state
device veth1113i0 left promiscuous mode
vmbr0: port 2(veth1113i0) entered disabled state
perf: interrupt took too long (2539 > 2500), lowering kernel.perf_event_max_sample_rate to 78750
perf: interrupt took too long (3187 > 3173), lowering kernel.perf_event_max_sample_rate to 62750