dmesg - RAID6-xfs
Linux version 4.12.14-lp150.12.48-default (geeko@buildhost) (gcc version 7.3.1 20180323 [gcc-7-branch revision 258812] (SUSE Linux) ) #1 SMP Tue Feb 12 14:01:48 UTC 2019 (268f014)
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000987ff] usable
BIOS-e820: [mem 0x0000000000098800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007918cfff] usable
BIOS-e820: [mem 0x000000007918d000-0x0000000079a75fff] reserved
BIOS-e820: [mem 0x0000000079a76000-0x0000000079f76fff] ACPI NVS
BIOS-e820: [mem 0x0000000079f77000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000107fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: Supermicro X10DRi/X10DRI-T, BIOS 3.1 09/14/2018
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1080000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 380000000000 mask 3FC000000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: last_pfn = 0x7918d max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcd30-0x000fcd3f] mapped at [ffffffffff200d30]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000092000] 92000 size 24576
Using GB pages for direct mapping
BRK [0x0305f000, 0x0305ffff] PGTABLE
BRK [0x03060000, 0x03060fff] PGTABLE
BRK [0x03061000, 0x03061fff] PGTABLE
RAMDISK: [mem 0x36987000-0x374bafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000079ACA0B0 0000E4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x0000000079AFDB30 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x0000000079ACA230 033900 (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 0x0000000079F75F80 000040
ACPI: APIC 0x0000000079AFDC40 000170 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x0000000079AFDDB0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x0000000079AFDDF8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SPMI 0x0000000079AFDE98 000041 (v05 ALASKA A M I 00000000 AMI. 00000000)
ACPI: MCFG 0x0000000079AFDEE0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: UEFI 0x0000000079AFDF20 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: MCEJ 0x0000000079AFDF68 000130 (v01 INTEL 00000001 INTL 0100000D)
ACPI: HPET 0x0000000079AFE098 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 0x0000000079AFE0D0 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SLIT 0x0000000079AFE160 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x0000000079AFE190 001158 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0x0000000079AFF2E8 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0x0000000079AFF328 017141 (v02 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: NITR 0x0000000079B16470 000071 (v02 ALASKA A M I 00000001 INTL 20091013)
ACPI: SSDT 0x0000000079B164E8 00264A (v02 ALASKA SpsNm 00000002 INTL 20120913)
ACPI: SSDT 0x0000000079B18B38 000064 (v02 ALASKA SpsNvs 00000002 INTL 20120913)
ACPI: PRAD 0x0000000079B18BA0 0000BF (v02 ALASKA A M I 00000002 INTL 20120913)
ACPI: DMAR 0x0000000079B18C60 0000BC (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: HEST 0x0000000079B18D20 0000A8 (v01 ALASKA A M I 00000001 INTL 00000001)
ACPI: BERT 0x0000000079B18DC8 000030 (v01 ALASKA A M I 00000001 INTL 00000001)
ACPI: ERST 0x0000000079B18DF8 000230 (v01 ALASKA A M I 00000001 INTL 00000001)
ACPI: EINJ 0x0000000079B19028 000150 (v01 ALASKA A M I 00000001 INTL 00000001)
ACPI: NFIT 0x0000000079B19178 000028 (v01 ALASKA A M I 00000001 ? 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 0 -> APIC 0x16 -> Node 0
SRAT: PXM 0 -> APIC 0x18 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 0 -> APIC 0x17 -> Node 0
SRAT: PXM 0 -> APIC 0x19 -> Node 0
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x107fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x107fffffff] -> [mem 0x00000000-0x107fffffff]
NODE_DATA(0) allocated [mem 0x107ffe7000-0x107fffcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000107fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000097fff]
node 0: [mem 0x0000000000100000-0x000000007918cfff]
node 0: [mem 0x0000000100000000-0x000000107fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000107fffffff]
On node 0 totalpages: 16748836
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3991 pages, LIFO batch:0
DMA32 zone: 7687 pages used for memmap
DMA32 zone: 491917 pages, LIFO batch:63
Normal zone: 253952 pages used for memmap
Normal zone: 16252928 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 20 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00098000-0x00098fff]
PM: Registered nosave memory: [mem 0x00099000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7918d000-0x79a75fff]
PM: Registered nosave memory: [mem 0x79a76000-0x79f76fff]
PM: Registered nosave memory: [mem 0x79f77000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:20 nr_node_ids:1
percpu: Embedded 48 pages/cpu @ffff88103f000000 s159744 r8192 d28672 u262144
pcpu-alloc: s159744 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 -- -- -- --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 16487112
Policy zone: Normal
log_buf_len individual max cpu contribution: 32768 bytes
log_buf_len total cpu_extra contributions: 622592 bytes
log_buf_len min size: 262144 bytes
log_buf_len: 1048576 bytes
early log buf free: 249356(95%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 4101560K/66995344K available (10256K kernel code, 1434K rwdata, 3340K rodata, 2052K init, 9908K bss, 1164320K reserved, 0K cma-reserved)
Kernel/User page tables isolation: enabled
ftrace: allocating 33253 entries in 130 pages
Hierarchical RCU implementation.
RCU event tracing is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=20.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=20
NR_IRQS:33024 nr_irqs:992 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2199.946 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.89 BogoMIPS (lpj=8799784)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170303
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 32K
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020de
DMAR: RMRR base: 0x0000007bc18000 end: 0x0000007bc27fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 1 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz (family: 0x6, model: 0x4f, stepping: 0x1)
Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19
smp: Brought up 1 node, 20 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 20 processors activated (87997.84 BogoMIPS)
node 0 initialised, 15432366 pages in 228ms
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
evm: security.selinux
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x79a76000-0x79f76fff] (5246976 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 13:27:54, date: 03/25/19
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: GPE 0x24 active on init
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: platform does not support [AER]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:6fe8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:6fe9] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: System wakeup disabled by ACPI
pci 0000:00:04.0: [8086:6f20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xfb42c000-0xfb42ffff 64bit]
pci 0000:00:04.1: [8086:6f21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xfb428000-0xfb42bfff 64bit]
pci 0000:00:04.2: [8086:6f22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xfb424000-0xfb427fff 64bit]
pci 0000:00:04.3: [8086:6f23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xfb420000-0xfb423fff 64bit]
pci 0000:00:04.4: [8086:6f24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xfb41c000-0xfb41ffff 64bit]
pci 0000:00:04.5: [8086:6f25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xfb418000-0xfb41bfff 64bit]
pci 0000:00:04.6: [8086:6f26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xfb414000-0xfb417fff 64bit]
pci 0000:00:04.7: [8086:6f27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xfb410000-0xfb413fff 64bit]
pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb439000-0xfb439fff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0xf110-0xf117]
pci 0000:00:11.4: reg 0x14: [io 0xf100-0xf103]
pci 0000:00:11.4: reg 0x18: [io 0xf0f0-0xf0f7]
pci 0000:00:11.4: reg 0x1c: [io 0xf0e0-0xf0e3]
pci 0000:00:11.4: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:11.4: reg 0x24: [mem 0xfb438000-0xfb4387ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb400000-0xfb40ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb437000-0xfb43700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfb436000-0xfb43600f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb434000-0xfb4343ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb433000-0xfb4333ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb432000-0xfb4327ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb431000-0xfb4310ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:01:00.0: [1000:005d] type 00 class 0x010400
pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x14: [mem 0xfb300000-0xfb30ffff 64bit]
pci 0000:01:00.0: reg 0x1c: [mem 0xfb200000-0xfb2fffff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xfb100000-0xfb1fffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfb100000-0xfb3fffff]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:1528] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [io 0xd020-0xd03f]
pci 0000:03:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:03:00.1: [8086:1528] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref]
pci 0000:03:00.1: reg 0x18: [io 0xd000-0xd01f]
pci 0000:03:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:00:03.2: PCI bridge to [bus 03]
pci 0000:00:03.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:05:00.0: enabling Extended Tags
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 05-06]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:06:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:06:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:06:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff]
pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc07f]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:05:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
pci 0000:06:00.0: vgaarb: setting as boot VGA device
pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:06:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00098800-0x0009ffff]
e820: reserve RAM buffer [mem 0x7918d000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0a00-0x0a0f] has been reserved
system 00:02: [io 0x0a10-0x0a1f] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
system 00:02: [io 0x0a40-0x0a4f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:03.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 400000 add_align 100000
pci 0000:00:03.2: BAR 14: assigned [mem 0x90000000-0x903fffff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfb100000-0xfb3fffff]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:03:00.0: BAR 7: assigned [mem 0x90000000-0x900fffff 64bit]
pci 0000:03:00.0: BAR 10: assigned [mem 0x90100000-0x901fffff 64bit]
pci 0000:03:00.1: BAR 7: assigned [mem 0x90200000-0x902fffff 64bit]
pci 0000:03:00.1: BAR 10: assigned [mem 0x90300000-0x903fffff 64bit]
pci 0000:00:03.2: PCI bridge to [bus 03]
pci 0000:00:03.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.2: bridge window [mem 0x90000000-0x903fffff]
pci 0000:00:03.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:05:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:1c.4: PCI bridge to [bus 05-06]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfb100000-0xfb3fffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0x90000000-0x903fffff]
pci_bus 0000:03: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfb0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
PCI: CLS mismatch (64 != 32), using 64 bytes
pci 0000:06:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Unpacking initramfs...
Freeing initrd memory: 11472K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7518d000-0x7918d000] (64MB) mapped at [ffff88007518d000-ffff88007918cfff]
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1553520474.916:1): state=initialized audit_enabled=0 res=1
workingset: timestamp_bits=37 max_order=24 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:01.0: Signaling PME with IRQ 25
pcieport 0000:00:03.0: Signaling PME with IRQ 27
pcieport 0000:00:03.2: Signaling PME with IRQ 28
pcieport 0000:00:1c.0: Signaling PME with IRQ 29
pcieport 0000:00:1c.4: Signaling PME with IRQ 30
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xfa000000, mapped to 0xffffc90007800000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x4F
intel_idle: lapic_timer_reliable_states 0xffffffff
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: using lzo compression
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
intel_pstate: Intel P-state setting Enterprise Server Load-based policy
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
NET: Registered protocol family 10
Segment Routing with IPv6
intel_rdt: Intel RDT L3 allocation detected
intel_rdt: Intel RDT L3DATA allocation detected
intel_rdt: Intel RDT L3CODE allocation detected
intel_rdt: Intel RDT L3 monitoring detected
microcode: sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (2466524546, 0)->(2671944466, -205419920)
registered taskstats version 1
zswap: loaded using pool lzo/zbud
page_owner is disabled
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
ima: Allocated hash algorithm: sha256
evm: HMAC attrs: 0x1
Magic number: 11:165:484
rtc_cmos 00:00: setting system clock to 2019-03-25 13:27:56 UTC (1553520476)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2052K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2016K
Freeing unused kernel memory: 756K
systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Socket (/dev/log).
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Local File Systems.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Timers.
systemd[1]: Created slice System Slice.
systemd[1]: Reached target Slices.
alua: device handler registered
emc: device handler registered
rdac: device handler registered
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
tsc: Refined TSC clocksource calibration: 2199.998 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns
megasas: 07.704.04.00-rc1
megaraid_sas 0000:01:00.0: FW now in Ready state
megaraid_sas 0000:01:00.0: 64 bit DMA mask and 32 bit consistent mask
megaraid_sas 0000:01:00.0: firmware supports msix : (96)
megaraid_sas 0000:01:00.0: current msix/online cpus : (20/20)
megaraid_sas 0000:01:00.0: RDPQ mode : (disabled)
megaraid_sas 0000:01:00.0: Current firmware supports maximum commands: 928 LDIO thershold: 0
ahci 0000:00:11.4: version 3.0
megaraid_sas 0000:01:00.0: Configured max firmware commands: 927
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst
megaraid_sas 0000:01:00.0: FW supports sync cache : Yes
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
checking generic (fa000000 500000) vs hw (fa000000 1000000)
fb: switching to astdrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Using P2A bridge for configuration
[drm] AST 2400 detected
[drm] Analog VGA only
[drm] dram MCLK=408 Mhz type=1 bus_width=16 size=01000000
[TTM] Zone kernel: Available graphics memory: 32923676 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438100 irq 52
ata2: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438180 irq 52
ata3: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438200 irq 52
ata4: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438280 irq 52
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb434000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.12.14-lp150.12.48-default ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
megaraid_sas 0000:01:00.0: firmware type : Extended VD(240 VD)firmware
megaraid_sas 0000:01:00.0: controller type : MR(1024MB)
megaraid_sas 0000:01:00.0: Online Controller Reset(OCR) : Enabled
megaraid_sas 0000:01:00.0: Secure JBOD support : Yes
megaraid_sas 0000:01:00.0: NVMe passthru support : No
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb433000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.12.14-lp150.12.48-default ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.12.14-lp150.12.48-default xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
megaraid_sas 0000:01:00.0: INIT adapter done
megaraid_sas 0000:01:00.0: pci id : (0x1000)/(0x005d)/(0x1000)/(0x9361)
megaraid_sas 0000:01:00.0: unevenspan support : no
megaraid_sas 0000:01:00.0: firmware crash dump : yes
megaraid_sas 0000:01:00.0: jbod sync map : yes
scsi host0: Avago SAS based MegaRAID driver
scsi 0:2:0:0: Direct-Access AVAGO MR9361-8i 4.68 PQ: 0 ANSI: 5
sd 0:2:0:0: Attached scsi generic sg0 type 0
sd 0:2:0:0: [sda] 78134968320 512-byte logical blocks: (40.0 TB/36.4 TiB)
sd 0:2:0:0: [sda] 4096-byte physical blocks
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
fbcon: astdrmfb (fb0) is primary device
sda:
sd 0:2:0:0: [sda] Attached SCSI disk
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.12.14-lp150.12.48-default xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
Console: switching to colour frame buffer device 160x64
ast 0000:06:00.0: fb0: astdrmfb frame buffer device
random: fast init done
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
scsi host10: ahci
ata5: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432100 irq 54
ata6: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432180 irq 54
ata7: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432200 irq 54
ata8: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432280 irq 54
ata9: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432300 irq 54
ata10: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432380 irq 54
[drm] Initialized ast 0.1.0 20120228 for 0000:06:00.0 on minor 0
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata5.00: ATA-9: SuperMicro SSD, SOB20R, max UDMA/133
ata5.00: 123731968 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA SuperMicro SSD 0R PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] 123731968 512-byte logical blocks: (63.4 GB/59.0 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 5:0:0:0: [sdb] Attached SCSI disk
ata9: SATA link down (SStatus 0 SControl 300)
usb 3-2: new low-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
raid6: sse2x1 gen() 7815 MB/s
raid6: sse2x1 xor() 5378 MB/s
usb 3-2: New USB device found, idVendor=03f0, idProduct=0024
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: HP Basic USB Keyboard
usb 3-2: Manufacturer: CHICONY
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:03F0:0024.0001/input/input0
raid6: sse2x2 gen() 9543 MB/s
hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-2/input0
raid6: sse2x2 xor() 5863 MB/s
usb 3-14: new high-speed USB device number 3 using xhci_hcd
raid6: sse2x4 gen() 11036 MB/s
raid6: sse2x4 xor() 4582 MB/s
raid6: avx2x1 gen() 10559 MB/s
raid6: avx2x1 xor() 6133 MB/s
raid6: avx2x2 gen() 11888 MB/s
raid6: avx2x2 xor() 6946 MB/s
raid6: avx2x4 gen() 12566 MB/s
raid6: avx2x4 xor() 7802 MB/s
raid6: using algorithm avx2x4 gen() 12566 MB/s
raid6: .... xor() 7802 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
clocksource: Switched to clocksource tsc
xor: automatically using best checksumming function avx
usb 3-14: New USB device found, idVendor=0557, idProduct=7000
usb 3-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-14:1.0: USB hub found
hub 3-14:1.0: 4 ports detected
Btrfs loaded, crc32c=crc32c-intel, assert=on
BTRFS: device fsid 2b724e3b-5c6a-4a68-bf72-8e68e2ad5245 devid 1 transid 80257 /dev/sdb2
BTRFS info (device sdb2): disk space caching is enabled
BTRFS info (device sdb2): has skinny extents
BTRFS info (device sdb2): detected SSD devices, enabling SSD mode
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
systemd-journald[264]: Received SIGTERM from PID 1 (systemd).
systemd: 16 output lines suppressed due to ratelimiting
usb 3-14.1: new low-speed USB device number 4 using xhci_hcd
usb 3-14.1: New USB device found, idVendor=0557, idProduct=2419
usb 3-14.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/3-14.1:1.0/0003:0557:2419.0002/input/input1
BTRFS info (device sdb2): disk space caching is enabled
hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-14.1/input0
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/3-14.1:1.1/0003:0557:2419.0003/input/input2
hid-generic 0003:0557:2419.0003: input,hidraw2: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-14.1/input1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ipmi message handler version 39.2
wmi: Mapper loaded
ipmi device interface
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
(NULL device *): SPMI-specified kcs state machine: duplicate
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
dca service started, version 1.12.1
input: PC Speaker as /devices/platform/pcspkr/input/input5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ioatdma: Intel(R) QuickData Technology Driver 4.00
iTCO_vendor_support: vendor-support=0
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Wellsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
PTP clock support registered
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
ixgbe: Copyright (c) 1999-2016 Intel Corporation.
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6f60
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f79
EDAC sbridge: Seeking for: PCI ID 8086:6f6a
EDAC sbridge: Seeking for: PCI ID 8086:6f6b
EDAC sbridge: Seeking for: PCI ID 8086:6f6c
EDAC sbridge: Seeking for: PCI ID 8086:6f6d
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC MC0: Giving out device to module sb_edac controller Broadwell SrcID#0_Ha#0: DEV 0000:ff:12.0 (INTERRUPT)
EDAC sbridge: Ver: 1.1.2
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
intel_rapl: DRAM domain energy unit 15300pj
ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
ipmi_si IPI0001:00: Found new BMC (man_id: 0x002a7c, prod_id: 0x0728, dev_id: 0x20)
ipmi_si IPI0001:00: IPMI kcs interface initialized
IPMI SSIF Interface driver
systemd-journald[534]: Received request to flush runtime journal from PID 1
audit: type=1400 audit(1553520479.499:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=751 comm="apparmor_parser"
ixgbe 0000:03:00.0: Multiqueue Enabled: Rx Queue count = 20, Tx Queue count = 20 XDP Queue count = 0
audit: type=1400 audit(1553520479.511:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=760 comm="apparmor_parser"
audit: type=1400 audit(1553520479.519:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslogd" pid=765 comm="apparmor_parser"
audit: type=1400 audit(1553520479.527:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslog-ng" pid=770 comm="apparmor_parser"
audit: type=1400 audit(1553520479.535:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lessopen.sh" pid=776 comm="apparmor_parser"
audit: type=1400 audit(1553520479.543:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2" pid=781 comm="apparmor_parser"
audit: type=1400 audit(1553520479.543:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=781 comm="apparmor_parser"
audit: type=1400 audit(1553520479.543:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=781 comm="apparmor_parser"
audit: type=1400 audit(1553520479.543:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=781 comm="apparmor_parser"
ixgbe 0000:03:00.0: PCI Express bandwidth of 32GT/s available
ixgbe 0000:03:00.0: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
ixgbe 0000:03:00.0: MAC: 3, PHY: 0, PBA No: 030C00-000
ixgbe 0000:03:00.0: ac:1f:6b:4c:ed:60
ixgbe 0000:03:00.0: Intel(R) 10 Gigabit Network Connection
ixgbe 0000:03:00.1: Multiqueue Enabled: Rx Queue count = 20, Tx Queue count = 20 XDP Queue count = 0
ixgbe 0000:03:00.1: PCI Express bandwidth of 32GT/s available
ixgbe 0000:03:00.1: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
ixgbe 0000:03:00.1: MAC: 3, PHY: 0, PBA No: 030C00-000
ixgbe 0000:03:00.1: ac:1f:6b:4c:ed:61
ixgbe 0000:03:00.1: Intel(R) 10 Gigabit Network Connection
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
No iBFT detected.
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
pps pps0: new PPS source ptp0
ixgbe 0000:03:00.0: registered PHC device on eth0
pps pps1: new PPS source ptp1
ixgbe 0000:03:00.1: registered PHC device on eth1
ixgbe 0000:03:00.1 eth1: NIC Link is Up 100 Mbps, Flow Control: None
NET: Registered protocol family 17
ixgbe 0000:03:00.0 eth0: NIC Link is Up 1 Gbps, Flow Control: None
nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
BTRFS info (device sdb2): qgroup scan completed (inconsistency flag cleared)
sda: sda1 sda2
sda: sda1 sda2
BTRFS: device label RAID_btrfs devid 1 transid 5 /dev/sda2
SGI XFS with ACLs, security attributes, no debug enabled
XFS (sda1): Mounting V5 Filesystem
XFS (sda1): Ending clean mount
BTRFS info (device sda2): disk space caching is enabled
BTRFS info (device sda2): has skinny extents
BTRFS info (device sda2): flagging fs with big metadata feature
XFS (sda1): Unmounting Filesystem
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
BTRFS: device label RAID_btrfs devid 1 transid 5 /dev/sda2
BTRFS info (device sda2): disk space caching is enabled
BTRFS info (device sda2): has skinny extents
BTRFS info (device sda2): flagging fs with big metadata feature
BTRFS info (device sda2): setting nodatacow, compression disabled
BTRFS info (device sda2): disk space caching is enabled
BTRFS: device label RAID_btrfs devid 1 transid 5 /dev/sda2
BTRFS error (device sda2): sectorsize 32768 not supported yet, only support 4096
BTRFS error (device sda2): superblock contains fatal errors
BTRFS error (device sda2): open_ctree failed
BTRFS: device label RAID_btrfs devid 1 transid 5 /dev/sda2
BTRFS error (device sda2): sectorsize 32768 not supported yet, only support 4096
BTRFS error (device sda2): superblock contains fatal errors
BTRFS error (device sda2): open_ctree failed
BTRFS: device label RAID_btrfs devid 1 transid 5 /dev/sda2
BTRFS error (device sda2): sectorsize 16384 not supported yet, only support 4096
BTRFS error (device sda2): superblock contains fatal errors
BTRFS error (device sda2): open_ctree failed
BTRFS: device label RAID_btrfs devid 1 transid 5 /dev/sda2
BTRFS info (device sda2): disk space caching is enabled
BTRFS info (device sda2): has skinny extents
BTRFS info (device sda2): flagging fs with big metadata feature
BTRFS: device label RAID_btrfs devid 1 transid 5 /dev/sda2
BTRFS info (device sda2): disk space caching is enabled
BTRFS info (device sda2): has skinny extents
BTRFS info (device sda2): flagging fs with big metadata feature
BTRFS: device label RAID_btrfs devid 1 transid 5 /dev/sda2
BTRFS: device label RAID_btrfs devid 1 transid 5 /dev/sda2
BTRFS: device label RAID_btrfs devid 1 transid 5 /dev/sda2
BTRFS: device label RAID_btrfs devid 1 transid 5 /dev/sda2
BTRFS: device label RAID_btrfs devid 1 transid 5 /dev/sda2
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
XFS (sda1): Mounting V5 Filesystem
XFS (sda1): Ending clean mount
XFS (sda1): Unmounting Filesystem
XFS (sda1): Mounting V5 Filesystem
XFS (sda1): Ending clean mount
BTRFS: device label RAID_btrfs devid 1 transid 5 /dev/sda2
BTRFS info (device sda2): disk space caching is enabled
BTRFS info (device sda2): has skinny extents
BTRFS info (device sda2): flagging fs with big metadata feature
BTRFS info (device sda2): setting nodatacow, compression disabled
BTRFS info (device sda2): disk space caching is enabled
XFS (sda1): Unmounting Filesystem
BTRFS: device label RAID_btrfs devid 1 transid 5 /dev/sda1
BTRFS info (device sda1): disk space caching is enabled
BTRFS info (device sda1): has skinny extents
BTRFS info (device sda1): flagging fs with big metadata feature
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
BTRFS info (device sdb2): qgroup scan completed (inconsistency flag cleared)
BTRFS: device label RAID_btrfs devid 1 transid 5 /dev/sda2
XFS (sda1): Mounting V5 Filesystem
XFS (sda1): Ending clean mount
XFS (sda1): Unmounting Filesystem
BTRFS info (device sda2): disk space caching is enabled
BTRFS info (device sda2): has skinny extents
BTRFS info (device sda2): flagging fs with big metadata feature
XFS (sda1): Mounting V5 Filesystem
XFS (sda1): Ending clean mount
perf: interrupt took too long (2519 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
perf: interrupt took too long (3154 > 3148), lowering kernel.perf_event_max_sample_rate to 63250
perf: interrupt took too long (3943 > 3942), lowering kernel.perf_event_max_sample_rate to 50500
python2 (19027): drop_caches: 3
python2 (19027): drop_caches: 3
python2 (19220): drop_caches: 3
python2 (19220): drop_caches: 3
python2 (19228): drop_caches: 3
python2 (19228): drop_caches: 3