dmesg - openarena_test2
Linux version 4.19.13-1-MANJARO (builduser@development) (gcc version 8.2.1 20181127 (GCC)) #1 SMP PREEMPT Sat Dec 29 15:43:56 UTC 2018
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
random: get_random_u32 called from bsp_init_amd+0x1f9/0x290 with crng_init=0
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000009e300fff] usable
BIOS-e820: [mem 0x000000009e301000-0x000000009e47efff] reserved
BIOS-e820: [mem 0x000000009e47f000-0x000000009e48efff] ACPI data
BIOS-e820: [mem 0x000000009e48f000-0x000000009e7d6fff] ACPI NVS
BIOS-e820: [mem 0x000000009e7d7000-0x000000009ece1fff] reserved
BIOS-e820: [mem 0x000000009ece2000-0x000000009ed2efff] type 20
BIOS-e820: [mem 0x000000009ed2f000-0x000000009ed2ffff] usable
BIOS-e820: [mem 0x000000009ed30000-0x000000009ef32fff] ACPI NVS
BIOS-e820: [mem 0x000000009ef33000-0x000000009f623fff] usable
BIOS-e820: [mem 0x000000009f624000-0x000000009f7f2fff] reserved
BIOS-e820: [mem 0x000000009f7f3000-0x000000009f7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff010000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x00000001beffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0x9e482000 ACPI 2.0=0x9e482000 SMBIOS=0xf04c0 MPS=0xfd480
SMBIOS 2.7 present.
DMI: SAMSUNG ELECTRONICS CO., LTD. 355V4C/356V4C/3445VC/3545VC/NP355V5C-A0EUK, BIOS P07ABF 07/04/2013
tsc: Fast TSC calibration using PIT
tsc: Detected 1896.636 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x1bf000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-D2FFF write-protect
D3000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFE0000000 write-back
2 base 00009F800000 mask FFFFFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 00000001bf000000 aka 7152M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 2552M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
e820: update [mem 0x9f800000-0xffffffff] usable ==> reserved
last_pfn = 0x9f800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd790-0x000fd79f] mapped at [(____ptrval____)]
Scanning 1 areas for low memory corruption
Base memory trampoline at [(____ptrval____)] 99000 size 24576
Using GB pages for direct mapping
BRK [0x13fa01000, 0x13fa01fff] PGTABLE
BRK [0x13fa02000, 0x13fa02fff] PGTABLE
BRK [0x13fa03000, 0x13fa03fff] PGTABLE
BRK [0x13fa04000, 0x13fa04fff] PGTABLE
BRK [0x13fa05000, 0x13fa05fff] PGTABLE
BRK [0x13fa06000, 0x13fa06fff] PGTABLE
BRK [0x13fa07000, 0x13fa07fff] PGTABLE
BRK [0x13fa08000, 0x13fa08fff] PGTABLE
BRK [0x13fa09000, 0x13fa09fff] PGTABLE
BRK [0x13fa0a000, 0x13fa0afff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x36dad000-0x376cdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000009E482000 000024 (v02 SECCSD)
ACPI: XSDT 0x000000009E482078 000074 (v01 01072009 AMI 00010013)
ACPI: FACP 0x000000009E48BC00 00010C (v05 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180810/tbfadt-624)
ACPI: DSDT 0x000000009E482180 009A79 (v02 SECCSD LH43STAR 00000000 INTL 20051117)
ACPI: FACS 0x000000009E7CE080 000040
ACPI: APIC 0x000000009E48BD10 000072 (v03 01072009 AMI 00010013)
ACPI: FPDT 0x000000009E48BD88 000044 (v01 SECCSD LH43STAR 01072009 AMI 00010013)
ACPI: MCFG 0x000000009E48BDD0 00003C (v01 SECCSD LH43STAR 01072009 MSFT 00010013)
ACPI: MSDM 0x000000009E48BE10 000055 (v03 SECCSD LH43STAR 01072009 AMI 00010013)
ACPI: HPET 0x000000009E48BE68 000038 (v01 SECCSD LH43STAR 01072009 AMI 00000005)
ACPI: BGRT 0x000000009E48BEA0 000038 (v00 SECCSD LH43STAR 01072009 AMI 00010013)
ACPI: SSDT 0x000000009E48BED8 000B9C (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: SSDT 0x000000009E48CA78 001ECC (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: SLIC 0x000000009E48E948 000176 (v01 SECCSD LH43STAR 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001beffffff]
NODE_DATA(0) allocated [mem 0x1beffa000-0x1beffdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000001beffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000009e300fff]
node 0: [mem 0x000000009ed2f000-0x000000009ed2ffff]
node 0: [mem 0x000000009ef33000-0x000000009f623fff]
node 0: [mem 0x000000009f7f3000-0x000000009f7fffff]
node 0: [mem 0x0000000100001000-0x00000001beffffff]
Reserved but unavailable: 97 pages
Initmem setup node 0 [mem 0x0000000000001000-0x00000001beffffff]
On node 0 totalpages: 1431966
DMA zone: 64 pages used for memmap
DMA zone: 24 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 10088 pages used for memmap
DMA32 zone: 645632 pages, LIFO batch:63
Normal zone: 12224 pages used for memmap
Normal zone: 782335 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9e301000-0x9e47efff]
PM: Registered nosave memory: [mem 0x9e47f000-0x9e48efff]
PM: Registered nosave memory: [mem 0x9e48f000-0x9e7d6fff]
PM: Registered nosave memory: [mem 0x9e7d7000-0x9ece1fff]
PM: Registered nosave memory: [mem 0x9ece2000-0x9ed2efff]
PM: Registered nosave memory: [mem 0x9ed30000-0x9ef32fff]
PM: Registered nosave memory: [mem 0x9f624000-0x9f7f2fff]
PM: Registered nosave memory: [mem 0x9f800000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xff00ffff]
PM: Registered nosave memory: [mem 0xff010000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[mem 0x9f800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288
pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 1409566
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 5335840K/5727864K available (12300K kernel code, 1383K rwdata, 3692K rodata, 1540K init, 3796K bss, 392024K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 36082 entries in 141 pages
rcu: Preemptible hierarchical RCU implementation.
rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
rcu: RCU dyntick-idle grace-period acceleration is enabled.
rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
rcu: RCU priority boosting: priority 1 delay 500 ms.
Tasks RCU enabled.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
rcu: Offload RCU callbacks from CPUs: (none).
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20180810
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x36ad842f3e3, max_idle_ns: 881590678654 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 3794.32 BogoMIPS (lpj=6322120)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 28K
smpboot: CPU0: AMD A8-4500M APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x10, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (15179.30 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x9e48f000-0x9e7d6fff] (3440640 bytes)
PM: Registering ACPI NVS region [mem 0x9ed30000-0x9ef32fff] (2109440 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 19:09:43, date: 01/08/19
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1546974582.219:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: 3 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 10 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: platform does not support [PME LTR]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:01.0: [1002:9903] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: enabling Extended Tags
pci 0000:00:01.0: BAR 0: assigned to efifb
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
pci 0000:00:01.1: enabling Extended Tags
pci 0000:00:01.1: supports D1 D2
pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
pci 0000:00:04.0: enabling Extended Tags
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
pci 0000:00:05.0: enabling Extended Tags
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfeb48000-0xfeb49fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb4c000-0xfeb4c7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb4b000-0xfeb4bfff]
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xfea00000-0xfea7ffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xfea80000-0xfea8ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 03-0b]
pci 0000:00:05.0: bridge window [mem 0xfea00000-0xfeafffff]
pci_bus 0000:0c: extended config space not accessible
pci 0000:00:14.4: PCI bridge to [bus 0c-12] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:00:01.0: vgaarb: setting as boot VGA device
pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:01.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x9e301000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9ed30000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9f624000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9f800000-0x9fffffff]
e820: reserve RAM buffer [mem 0x1bf000000-0x1bfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:01: [mem 0xff010000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs SYN2601 PNP0f13 (active)
pnp 00:06: Plug and Play ACPI device, IDs MSF0001 PNP030b (active)
system 00:07: [mem 0xa0000000-0xbfffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 400000 add_align 100000
pci 0000:00:04.0: BAR 14: assigned [mem 0xd0100000-0xd04fffff]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xd0100000-0xd04fffff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 03-0b]
pci 0000:00:05.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:14.4: PCI bridge to [bus 0c-12]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd04fffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:0c: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:0c: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:0c: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:0c: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:0c: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0c: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:0c: resource 10 [mem 0xc0000000-0xffffffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:01.1: Linked as a consumer to 0000:00:01.0
pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c6 took 85988 usecs
pci 0000:00:12.2: PME# does not work under D3, disabling it
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 9348K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x8e08a000-0x9208a000] (64MB)
amd_uncore: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=21 bucket_order=0
zbud: loaded
pstore: using zstd compression
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
io scheduler bfq-sq registered (default)
BFQ I/O-scheduler: v9 (with cgroups support)
blkcg_policy_register: BLKCG_MAX_POLS too small
pciehp 0000:00:04.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xc0000000, using 4224k, total 4224k
efifb: mode is 1366x768x32, linelength=5632, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
acpi device:2f: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input3
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (0 C)
usbcore: registered new interface driver usbserial_generic
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x06001116
microcode: CPU1: patch_level=0x06001116
microcode: CPU2: patch_level=0x06001116
microcode: CPU3: patch_level=0x06001116
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (955150873, 477205)->(1066187507, -110559429)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 527948c53ade48d6b6b6c73df839ceb5e9e33778'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 3:202:192
acpi device:1e: hash matches
rtc_cmos 00:02: setting system clock to 2019-01-08 19:09:43 UTC (1546974583)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 1540K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 404K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4a000
SCSI subsystem initialized
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.19.13-1-MANJARO ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:10.0: hcc params 0x014042c3 hci version 0x96 quirks 0x0000000000000608
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.19.13-1-MANJARO xhci-hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4b000
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.19.13-1-MANJARO xhci-hcd
usb usb4: SerialNumber: 0000:00:10.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
libata version 3.00 loaded.
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0xd impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c100 irq 30
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c200 irq 30
ata4: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c280 irq 30
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 4.19.13-1-MANJARO ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
usb 1-3: new high-speed USB device number 2 using ehci-pci
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-3: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: USB2.0-CRW
usb 1-3: Manufacturer: Generic
usb 1-3: SerialNumber: 20100201396000000
usbcore: registered new interface driver rtsx_usb
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SC01, max UDMA/100
ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10002, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208BB SC01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr 2:0:0:0: [sr0] scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 1896.525 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36acb1fc7d9, max_idle_ns: 881590472849 ns
clocksource: Switched to clocksource tsc
usb 3-4: new full-speed USB device number 2 using ohci-pci
usb 3-4: New USB device found, idVendor=0cf3, idProduct=3004, bcdDevice= 0.01
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: Bluetooth USB Host Controller
usb 3-4: Manufacturer: Atheros Communications
usb 3-4: SerialNumber: Alaska Day 2006
random: fast init done
fbcon: Taking over console
Console: switching to colour frame buffer device 170x48
usb 1-5: new high-speed USB device number 4 using ehci-pci
usb 1-5: New USB device found, idVendor=2232, idProduct=1029, bcdDevice= 0.25
usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-5: Product: WebCam SC-13HDL11939N
usb 1-5: Manufacturer: Generic
usb 1-5: SerialNumber: 200901010001
random: crng init done
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Created slice system-maia\x2dconsole.slice.
audit: type=1130 audit(1546974605.711:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974605.715:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974605.778:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (sda2): re-mounted. Opts: (null)
audit: type=1130 audit(1546974605.878:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974606.105:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974606.255:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[238]: Received request to flush runtime journal from PID 1
audit: type=1130 audit(1546974606.375:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
audit: type=1130 audit(1546974606.621:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974606.755:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974606.825:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[238]: File /var/log/journal/3d2e5513b56e4c60b05adc3a0957df7b/system.journal corrupted or uncleanly shut down, renaming and replacing.
Adding 5547004k swap on /swapfile. Priority:-2 extents:9 across:5858300k FS
acpi_cpufreq: overriding BIOS provided _PSD data
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
battery: [Firmware Bug]: battery: (dis)charge rate invalid.
battery: ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
input: PC Speaker as /devices/platform/pcspkr/input/input6
cryptd: max_cpu_qlen set to 1000
Linux agpgart interface v0.103
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
snd_hda_intel 0000:00:01.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
libphy: r8169: probed
r8169 0000:02:00.0 eth0: RTL8168f/8111f, b8:88:e3:fc:6f:82, XID 48000880, IRQ 32
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ath9k 0000:03:00.0: enabling device (0000 -> 0002)
ath: phy0: Set BT/WLAN RX diversity capability
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffbb5641500000, irq=17
[drm] radeon kernel modesetting enabled.
checking generic (c0000000 420000) vs hw (c0000000 10000000)
fb: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (ARUBA 0x1002:0x9903 0x144D:0xC0DD 0x00).
ATOM BIOS: 113
radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 2773982 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading ARUBA Microcode
psmouse serio1: synaptics: queried max coordinates: x [..5738], y [..4886]
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
psmouse serio1: synaptics: queried min coordinates: x [1210..], y [986..]
[drm] Found VCE firmware/feedback version 50.0.1 / 17!
[drm] GART: num cpu pages 262144, num gpu pages 262144
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00333/0x240000/0xa2400/0x0, board id: 1874, fw id: 1116252
[drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x000000000c81da9f
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x00000000ef06e2f1
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x000000007591ac21
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x00000000ab1b74b1
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x0000000073c77fc2
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x00000000f2309684
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x0000000016fe8fe8
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x00000000e68fd7a6
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: radeon: MSI limited to 32-bit
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 16 usecs
[drm] ring test on 7 succeeded in 4 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
media: Linux media interface: v0.10
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
videodev: Linux video capture interface: v2.00
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[drm] ib test on ring 5 succeeded
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
mousedev: PS/2 mouse device common for all mice
kauditd_printk_skb: 4 callbacks suppressed
audit: type=1130 audit(1546974610.888:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
r8169 0000:02:00.0 enp2s0: renamed from eth0
ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
usbcore: registered new interface driver btusb
uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11939N (2232:1029)
uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
input: WebCam SC-13HDL11939N: WebCam S as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
[drm] ib test on ring 6 succeeded
usb 3-4: USB disconnect, device number 2
usbcore: registered new interface driver ath3k
[drm] ib test on ring 7 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] eDP-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] VGA-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] CRT1: INTERNAL_UNIPHY2
[drm] CRT1: NUTMEG
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
usb 3-4: new full-speed USB device number 3 using ohci-pci
audit: type=1130 audit(1546974612.131:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
microcode: CPU2: new patch_level=0x06001119
microcode: CPU0: new patch_level=0x06001119
x86/CPU: CPU features have changed after loading microcode, but might not take effect.
x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.
audit: type=1130 audit(1546974612.888:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[drm] fb mappable at 0xC03DA000
[drm] vram apper at 0xC0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
audit: type=1127 audit(1546974612.948:19): pid=511 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
Console: switching to colour frame buffer device 170x48
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
audit: type=1130 audit(1546974615.021:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974615.021:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-timesyncd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974615.025:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=haveged comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
audit: type=1130 audit(1546974615.041:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974615.135:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shadow comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 3-4: New USB device found, idVendor=0cf3, idProduct=3004, bcdDevice= 0.02
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: Bluetooth USB Host Controller
usb 3-4: Manufacturer: Atheros Communications
usb 3-4: SerialNumber: Alaska Day 2006
audit: type=1131 audit(1546974617.791:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974617.795:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=grub-boot-indeterminate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546974617.795:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=grub-boot-indeterminate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974617.798:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=logrotate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546974617.798:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=logrotate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546974617.798:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shadow comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974617.801:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:radeon_bl0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974617.805:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:acpi_video0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
audit: type=1130 audit(1546974617.845:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974617.855:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=avahi-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
RTL8211E Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
kauditd_printk_skb: 8 callbacks suppressed
audit: type=1131 audit(1546974622.898:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974623.381:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wpa_supplicant comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
audit: type=1130 audit(1546974625.448:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
wlp3s0: authenticate with e8:fc:af:3a:07:40
wlp3s0: send auth to e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: RX AssocResp from e8:fc:af:3a:07:40 (capab=0x411 status=0 aid=4)
wlp3s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
audit: type=1130 audit(1546974626.958:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=postgresql comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974627.521:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=tlp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974629.635:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546974629.635:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546974630.635:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546974640.091:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974640.095:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546974640.095:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974640.098:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546974640.118:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=maia-console@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546974640.118:56): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=maia-console@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1006 audit(1546974643.955:57): pid=757 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
audit: type=1130 audit(1546974644.038:58): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1006 audit(1546974644.081:59): pid=760 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
audit: type=1130 audit(1546974644.331:60): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546974649.228:61): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
wlp3s0: deauthenticating from e8:fc:af:3a:07:40 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with e8:fc:af:3a:07:40
wlp3s0: send auth to e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: RX AssocResp from e8:fc:af:3a:07:40 (capab=0x411 status=0 aid=4)
wlp3s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: deauthenticating from e8:fc:af:3a:07:40 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with e8:fc:af:3a:07:40
wlp3s0: send auth to e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: RX AssocResp from e8:fc:af:3a:07:40 (capab=0x411 status=0 aid=4)
wlp3s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: deauthenticating from e8:fc:af:3a:07:40 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with e8:fc:af:3a:07:40
wlp3s0: send auth to e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: RX AssocResp from e8:fc:af:3a:07:40 (capab=0x411 status=0 aid=4)
wlp3s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: deauthenticating from e8:fc:af:3a:07:40 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with e8:fc:af:3a:07:40
wlp3s0: send auth to e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: RX AssocResp from e8:fc:af:3a:07:40 (capab=0x411 status=0 aid=4)
wlp3s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: deauthenticating from e8:fc:af:3a:07:40 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
audit: type=1130 audit(1546974941.061:64): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with e8:fc:af:3a:07:40
wlp3s0: send auth to e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: RX AssocResp from e8:fc:af:3a:07:40 (capab=0x411 status=0 aid=4)
wlp3s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
audit: type=1131 audit(1546974951.541:66): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
wlp3s0: deauthenticating from e8:fc:af:3a:07:40 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
audit: type=1130 audit(1546974968.381:68): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
audit: type=1131 audit(1546974978.541:70): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with e8:fc:af:3a:07:40
wlp3s0: send auth to e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: RX AssocResp from e8:fc:af:3a:07:40 (capab=0x411 status=0 aid=4)
wlp3s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: deauthenticating from e8:fc:af:3a:07:40 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with e8:fc:af:3a:07:40
wlp3s0: send auth to e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: RX AssocResp from e8:fc:af:3a:07:40 (capab=0x411 status=0 aid=4)
wlp3s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: deauthenticating from e8:fc:af:3a:07:40 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with e8:fc:af:3a:07:40
wlp3s0: send auth to e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: RX AssocResp from e8:fc:af:3a:07:40 (capab=0x411 status=0 aid=4)
wlp3s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: deauthenticating from e8:fc:af:3a:07:40 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with e8:fc:af:3a:07:40
wlp3s0: send auth to e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: RX AssocResp from e8:fc:af:3a:07:40 (capab=0x411 status=0 aid=4)
wlp3s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
usb 2-1: new high-speed USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=7392, idProduct=7711, bcdDevice= 1.01
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: 802.11 n WLAN
usb 2-1: Manufacturer: Ralink
usb 2-1: SerialNumber: 1.0
usb 2-1: reset high-speed USB device number 2 using xhci_hcd
ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected
ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
usbcore: registered new interface driver rt2800usb
audit: type=1130 audit(1546975199.421:74): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
rt2800usb 2-1:1.0 wlp0s16f0u1: renamed from wlan0
IPv6: ADDRCONF(NETDEV_UP): wlp0s16f0u1: link is not ready
ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
IPv6: ADDRCONF(NETDEV_UP): wlp0s16f0u1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s16f0u1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s16f0u1: link is not ready
audit: type=1131 audit(1546975204.428:75): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
wlp3s0: deauthenticating from e8:fc:af:3a:07:40 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with e8:fc:af:3a:07:40
wlp3s0: send auth to e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: RX AssocResp from e8:fc:af:3a:07:40 (capab=0x411 status=0 aid=4)
wlp3s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: deauthenticating from e8:fc:af:3a:07:40 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
audit: type=1130 audit(1546975228.931:77): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with e8:fc:af:3a:07:40
wlp3s0: send auth to e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: RX AssocResp from e8:fc:af:3a:07:40 (capab=0x411 status=0 aid=4)
wlp3s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
audit: type=1131 audit(1546975239.531:79): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
wlp3s0: deauthenticating from e8:fc:af:3a:07:40 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with e8:fc:af:3a:07:40
wlp3s0: send auth to e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: RX AssocResp from e8:fc:af:3a:07:40 (capab=0x411 status=0 aid=4)
wlp3s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: deauthenticating from e8:fc:af:3a:07:40 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with e8:fc:af:3a:07:40
wlp3s0: send auth to e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with e8:fc:af:3a:07:40 (try 1/3)
wlp3s0: RX AssocResp from e8:fc:af:3a:07:40 (capab=0x411 status=0 aid=4)
wlp3s0: associated
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
ath: regdomain 0x833a dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
audit: type=1130 audit(1546975472.108:81): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546975482.541:82): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546975482.638:83): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546975482.638:84): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
IPv6: ADDRCONF(NETDEV_UP): wlp0s16f0u1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s16f0u1: link is not ready
usb 2-1: USB disconnect, device number 2
audit: type=1130 audit(1546975976.543:85): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546975981.549:86): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 2-1: new high-speed USB device number 3 using xhci_hcd
usb 2-1: New USB device found, idVendor=7392, idProduct=7711, bcdDevice= 1.01
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: 802.11 n WLAN
usb 2-1: Manufacturer: Ralink
usb 2-1: SerialNumber: 1.0
usb 2-1: reset high-speed USB device number 3 using xhci_hcd
ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 0005 detected
ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
rt2800usb 2-1:1.0 wlp0s16f0u1: renamed from wlan0
audit: type=1130 audit(1546976063.166:87): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
IPv6: ADDRCONF(NETDEV_UP): wlp0s16f0u1: link is not ready
ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
IPv6: ADDRCONF(NETDEV_UP): wlp0s16f0u1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s16f0u1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s16f0u1: link is not ready
audit: type=1131 audit(1546976068.172:88): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546976088.012:89): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546976118.222:90): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
IPv6: ADDRCONF(NETDEV_UP): wlp0s16f0u1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s16f0u1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s16f0u1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s16f0u1: link is not ready
audit: type=1130 audit(1546977564.314:91): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 2-1: USB disconnect, device number 3
audit: type=1130 audit(1546977570.224:92): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546977575.231:93): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546977594.395:94): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
st: Version 20160209, fixed bufsize 32768, s/g segs 256
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
audit: type=1130 audit(1546992015.796:95): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shadow comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546992015.816:96): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shadow comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546992015.966:97): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=logrotate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546992015.966:98): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=logrotate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1546992025.766:99): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1546992025.766:100): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'