dmesg - ubuntutest
Linux version 4.15.17-1-pve (root@nora) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP PVE 4.15.17-9 (Wed, 9 May 2018 13:31:43 +0200) ()
Command line: BOOT_IMAGE=/ROOT/pve-1@/boot/vmlinuz-4.15.17-1-pve root=ZFS=rpool/ROOT/pve-1 ro root=ZFS=rpool/ROOT/pve-1 boot=zfs quiet rootdelay=30
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000cd2effff] usable
BIOS-e820: [mem 0x00000000cd2f0000-0x00000000cd31bfff] reserved
BIOS-e820: [mem 0x00000000cd31c000-0x00000000cd35afff] ACPI data
BIOS-e820: [mem 0x00000000cd35b000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000102fffffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 2.7 present.
DMI: Dell Inc. PowerEdge R620/01W23F, BIOS 2.7.0 05/23/2018
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1030000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CBFFF write-protect
CC000-D3FFF write-back
D4000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FFF80000000 write-back
1 base 000080000000 mask 3FFFC0000000 write-back
2 base 0000C0000000 mask 3FFFF0000000 write-back
3 base 000100000000 mask 3FFF00000000 write-back
4 base 000200000000 mask 3FFE00000000 write-back
5 base 000400000000 mask 3FFC00000000 write-back
6 base 000800000000 mask 3FF800000000 write-back
7 base 001000000000 mask 3FFFC0000000 write-back
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcd2f0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ (ptrval)]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 96000 size 24576
Using GB pages for direct mapping
BRK [0xb79b42000, 0xb79b42fff] PGTABLE
BRK [0xb79b43000, 0xb79b43fff] PGTABLE
BRK [0xb79b44000, 0xb79b44fff] PGTABLE
BRK [0xb79b45000, 0xb79b45fff] PGTABLE
BRK [0xb79b46000, 0xb79b46fff] PGTABLE
BRK [0xb79b47000, 0xb79b47fff] PGTABLE
BRK [0xb79b48000, 0xb79b48fff] PGTABLE
RAMDISK: [mem 0x33b93000-0x35dc0fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0C40 000024 (v02 DELL )
ACPI: XSDT 0x00000000000F0D88 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 0x00000000CD33534C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 0x00000000CD31C000 008029 (v01 DELL PE_SC3 00000001 INTL 20110211)
ACPI: FACS 0x00000000CD337000 000040
ACPI: FACS 0x00000000CD337000 000040
ACPI: APIC 0x00000000CD334478 0001EA (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 0x00000000CD334664 000050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 0x00000000CD3346B8 000038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DMAR 0x00000000CD3346F4 000138 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 0x00000000CD334A10 00003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 0x00000000CD334A50 000134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 0x00000000CD334B88 000024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 0x00000000CD3241EC 000270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 0x00000000CD32445C 00055C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 0x00000000CD32402C 000030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 0x00000000CD32405C 000190 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 0x00000000CD3352E4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: PC__ 0x00000000CD335274 00006E (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 0x00000000CD334DB0 0004C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 0x00000000CD338000 006784 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 1 -> APIC 0x00 -> Node 0
SRAT: PXM 2 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x02 -> Node 0
SRAT: PXM 2 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x04 -> Node 0
SRAT: PXM 2 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x06 -> Node 0
SRAT: PXM 2 -> APIC 0x26 -> Node 1
SRAT: PXM 1 -> APIC 0x08 -> Node 0
SRAT: PXM 2 -> APIC 0x28 -> Node 1
SRAT: PXM 1 -> APIC 0x0a -> Node 0
SRAT: PXM 2 -> APIC 0x2a -> Node 1
SRAT: PXM 1 -> APIC 0x01 -> Node 0
SRAT: PXM 2 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x03 -> Node 0
SRAT: PXM 2 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x05 -> Node 0
SRAT: PXM 2 -> APIC 0x25 -> Node 1
SRAT: PXM 1 -> APIC 0x07 -> Node 0
SRAT: PXM 2 -> APIC 0x27 -> Node 1
SRAT: PXM 1 -> APIC 0x09 -> Node 0
SRAT: PXM 2 -> APIC 0x29 -> Node 1
SRAT: PXM 1 -> APIC 0x0b -> Node 0
SRAT: PXM 2 -> APIC 0x2b -> Node 1
ACPI: SRAT: Node 0 PXM 1 [mem 0x00000000-0x82fffffff]
ACPI: SRAT: Node 1 PXM 2 [mem 0x830000000-0x102fffffff]
NODE_DATA(0) allocated [mem 0x82ffd5000-0x82fffffff]
NODE_DATA(1) allocated [mem 0x102ffd5000-0x102fffffff]
tsc: Fast TSC calibration using PIT
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000102fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x0000000000100000-0x00000000cd2effff]
node 0: [mem 0x0000000100000000-0x000000082fffffff]
node 1: [mem 0x0000000830000000-0x000000102fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000082fffffff]
On node 0 totalpages: 8376971
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 13068 pages used for memmap
DMA32 zone: 836336 pages, LIFO batch:31
Normal zone: 117760 pages used for memmap
Normal zone: 7536640 pages, LIFO batch:31
Initmem setup node 1 [mem 0x0000000830000000-0x000000102fffffff]
On node 1 totalpages: 8388608
Normal zone: 131072 pages used for memmap
Normal zone: 8388608 pages, LIFO batch:31
Reserved but unavailable: 101 pages
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 1, version 32, address 0xfec3f000, GSI 32-55
IOAPIC[2]: apic_id 2, version 32, address 0xfec7f000, GSI 64-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 48 CPUs, 24 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x000fffff]
PM: Registered nosave memory: [mem 0xcd2f0000-0xcd31bfff]
PM: Registered nosave memory: [mem 0xcd31c000-0xcd35afff]
PM: Registered nosave memory: [mem 0xcd35b000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xffffffff]
e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:48 nr_cpu_ids:48 nr_node_ids:2
percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 [0] 16 18 20 22 24 26 28 30
pcpu-alloc: [0] 32 34 36 38 40 42 44 46 [1] 01 03 05 07 09 11 13 15
pcpu-alloc: [1] 17 19 21 23 25 27 29 31 [1] 33 35 37 39 41 43 45 47
Built 2 zonelists, mobility grouping on. Total pages: 16503594
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/ROOT/pve-1@/boot/vmlinuz-4.15.17-1-pve root=ZFS=rpool/ROOT/pve-1 ro root=ZFS=rpool/ROOT/pve-1 boot=zfs quiet rootdelay=30
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 192512 bytes
log_buf_len min size: 262144 bytes
log_buf_len: 524288 bytes
early log buf free: 250276(95%)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 65874956K/67062316K available (12300K kernel code, 2478K rwdata, 4272K rodata, 2412K init, 2416K bss, 1187360K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=48, Nodes=2
Kernel/User page tables isolation: enabled
ftrace: allocating 39626 entries in 155 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=48.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=48
NR_IRQS: 524544, nr_irqs: 1896, preallocated irqs: 16
Console: colour VGA+ 80x25
console [tty0] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
ACPI: Core revision 20170831
ACPI: 2 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000d3000000 flags: 0x0
DMAR: dmar0: reg_base_addr d3000000 ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: DRHD base: 0x000000df900000 flags: 0x1
DMAR: dmar1: reg_base_addr df900000 ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: RMRR base: 0x000000cf458000 end: 0x000000cf46ffff
DMAR: RMRR base: 0x000000cf450000 end: 0x000000cf450fff
DMAR: RMRR base: 0x000000cf452000 end: 0x000000cf452fff
DMAR: ATSR flags: 0x0
DMAR-IR: IOAPIC id 2 under DRHD base 0xd3000000 IOMMU 0
DMAR-IR: IOAPIC id 0 under DRHD base 0xdf900000 IOMMU 1
DMAR-IR: IOAPIC id 1 under DRHD base 0xdf900000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xdf900000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 1999.948 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.89 BogoMIPS (lpj=7999792)
pid_max: default: 49152 minimum: 384
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Spectre V2 : Enabling Restricted Speculation for firmware calls
Freeing SMP alternatives memory: 36K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz (family: 0x6, model: 0x2d, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #1, CPUs: #1
.... node #0, CPUs: #2
.... node #1, CPUs: #3
.... node #0, CPUs: #4
.... node #1, CPUs: #5
.... node #0, CPUs: #6
.... node #1, CPUs: #7
.... node #0, CPUs: #8
.... node #1, CPUs: #9
.... node #0, CPUs: #10
.... node #1, CPUs: #11
.... node #0, CPUs: #12
.... node #1, CPUs: #13
.... node #0, CPUs: #14
.... node #1, CPUs: #15
.... node #0, CPUs: #16
.... node #1, CPUs: #17
.... node #0, CPUs: #18
.... node #1, CPUs: #19
.... node #0, CPUs: #20
.... node #1, CPUs: #21
.... node #0, CPUs: #22
.... node #1, CPUs: #23
smp: Brought up 2 nodes, 24 CPUs
smpboot: Max logical packages: 4
smpboot: Total of 24 processors activated (96013.58 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 16384 (order: 8, 1048576 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 0:40:17, date: 11/09/18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1541724017.212:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
PCI: Dell System detected, enabling pci=bfsort.
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3d])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: PCIe AER handled by firmware
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0x1fff window]
pci_bus 0000:00: root bus resource [io 0xe000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xd8000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [bus 00-3d]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:3c03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: [8086:3c06] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: enabling Extended Tags
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf8fb000-0xdf8fb00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xdf8fc000-0xdf8fc00f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdf8fd000-0xdf8fd3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdf8fe000-0xdf8fe3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xece8-0xecef]
pci 0000:00:1f.2: reg 0x14: [io 0xecf8-0xecfb]
pci 0000:00:1f.2: reg 0x18: [io 0xecf0-0xecf7]
pci 0000:00:1f.2: reg 0x1c: [io 0xecfc-0xecff]
pci 0000:00:1f.2: reg 0x20: [io 0xecc0-0xecdf]
pci 0000:00:1f.2: reg 0x24: [mem 0xdf8ff000-0xdf8ff7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:02:00.0: [14e4:165f] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xd90a0000-0xd90affff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xd90b0000-0xd90bffff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xd90c0000-0xd90cffff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0xdc000000-0xdc03ffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: [14e4:165f] type 00 class 0x020000
pci 0000:02:00.1: reg 0x10: [mem 0xd90d0000-0xd90dffff 64bit pref]
pci 0000:02:00.1: reg 0x18: [mem 0xd90e0000-0xd90effff 64bit pref]
pci 0000:02:00.1: reg 0x20: [mem 0xd90f0000-0xd90fffff 64bit pref]
pci 0000:02:00.1: reg 0x30: [mem 0xdc000000-0xdc03ffff pref]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 02]
pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdc7fffff]
pci 0000:00:01.0: bridge window [mem 0xd9000000-0xd90fffff 64bit pref]
pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xd91a0000-0xd91affff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xd91b0000-0xd91bffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [mem 0xd91c0000-0xd91cffff 64bit pref]
pci 0000:01:00.0: reg 0x30: [mem 0xdc800000-0xdc83ffff pref]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000
pci 0000:01:00.1: reg 0x10: [mem 0xd91d0000-0xd91dffff 64bit pref]
pci 0000:01:00.1: reg 0x18: [mem 0xd91e0000-0xd91effff 64bit pref]
pci 0000:01:00.1: reg 0x20: [mem 0xd91f0000-0xd91fffff 64bit pref]
pci 0000:01:00.1: reg 0x30: [mem 0xdc800000-0xdc83ffff pref]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xdc800000-0xdcffffff]
pci 0000:00:01.1: bridge window [mem 0xd9100000-0xd91fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 04]
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:05:00.0: [1000:0072] type 00 class 0x010700
pci 0000:05:00.0: reg 0x10: [io 0xfc00-0xfcff]
pci 0000:05:00.0: reg 0x14: [mem 0xddff0000-0xddffffff 64bit]
pci 0000:05:00.0: reg 0x1c: [mem 0xddf80000-0xddfbffff 64bit]
pci 0000:05:00.0: reg 0x30: [mem 0xdd000000-0xdd0fffff pref]
pci 0000:05:00.0: enabling Extended Tags
pci 0000:05:00.0: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 05]
pci 0000:00:03.0: bridge window [io 0xf000-0xffff]
pci 0000:00:03.0: bridge window [mem 0xdd000000-0xddffffff]
pci 0000:00:11.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [1912:0013] type 01 class 0x060400
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 08-0c]
pci 0000:00:1c.7: bridge window [mem 0xde000000-0xdf7fffff]
pci 0000:00:1c.7: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:09:00.0: [1912:0013] type 01 class 0x060400
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:01.0: [1912:0013] type 01 class 0x060400
pci 0000:09:01.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PCI bridge to [bus 09-0c]
pci 0000:08:00.0: bridge window [mem 0xde000000-0xdf7fffff]
pci 0000:08:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:0a:00.0: [1912:0012] type 01 class 0x060400
pci 0000:09:00.0: PCI bridge to [bus 0a-0b]
pci 0000:09:00.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:09:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:0b:00.0: [102b:0534] type 00 class 0x030000
pci 0000:0b:00.0: reg 0x10: [mem 0xd8000000-0xd8ffffff pref]
pci 0000:0b:00.0: reg 0x14: [mem 0xdeffc000-0xdeffffff]
pci 0000:0b:00.0: reg 0x18: [mem 0xde000000-0xde7fffff]
pci 0000:0a:00.0: PCI bridge to [bus 0b]
pci 0000:0a:00.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:0a:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:09:01.0: PCI bridge to [bus 0c]
pci 0000:09:01.0: bridge window [mem 0xdf700000-0xdf7fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x1fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 40-7e])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:01: PCIe AER handled by firmware
acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:40
pci_bus 0000:40: root bus resource [io 0x2000-0x3fff window]
pci_bus 0000:40: root bus resource [io 0x4000-0x5fff window]
pci_bus 0000:40: root bus resource [io 0x6000-0x7fff window]
pci_bus 0000:40: root bus resource [io 0x8000-0x9fff window]
pci_bus 0000:40: root bus resource [io 0xa000-0xbfff window]
pci_bus 0000:40: root bus resource [io 0xc000-0xdfff window]
pci_bus 0000:40: root bus resource [mem 0xd0000000-0xd7ffffff window]
pci_bus 0000:40: root bus resource [bus 40-7e]
pci 0000:40:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:40:01.0: PME# supported from D0 D3hot D3cold
pci 0000:40:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:40:03.0: enabling Extended Tags
pci 0000:40:03.0: PME# supported from D0 D3hot D3cold
pci 0000:40:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:40:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:40:01.0: PCI bridge to [bus 41]
pci 0000:40:03.0: PCI bridge to [bus 42]
pci_bus 0000:40: on NUMA node 1
ACPI: PCI Root Bridge [P0B1] (domain 0000 [bus 3f])
acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:02: PCIe AER handled by firmware
acpi PNP0A08:02: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:02: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [bus 3f]
pci 0000:3f:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:3f:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:3f:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:3f:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:3f:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:3f:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:3f:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:3f:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:3f:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:3f:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:3f:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:3f:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:3f:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:3f:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:3f:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:3f:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:3f:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:3f:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:3f:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:3f:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:3f:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:3f:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:3f:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:3f:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:3f:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:3f:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:3f:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:3f:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:3f:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:3f:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:3f:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:3f:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:3f:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:3f:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:3f: on NUMA node 0
ACPI: PCI Root Bridge [P1B1] (domain 0000 [bus 7f])
acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:03: PCIe AER handled by firmware
acpi PNP0A08:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: root bus resource [bus 7f]
pci 0000:7f:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:7f:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:7f:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:7f:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:7f:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:7f:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:7f:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:7f:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:7f:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:7f:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:7f:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:7f:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:7f:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:7f:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:7f:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:7f:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:7f:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:7f:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:7f:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:7f:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:7f:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:7f:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:7f:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:7f:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:7f:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:7f:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:7f:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:7f:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:7f:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:7f:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:7f:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:7f:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:7f:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:7f:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:7f: on NUMA node 1
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 *6 7 11 14 15)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 11 *14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:0b:00.0: vgaarb: setting as boot VGA device
pci 0000:0b:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:0b:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
e820: reserve RAM buffer [mem 0xcd2f0000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [io 0x0800-0x087f] has been reserved
system 00:04: [io 0x0880-0x08ff] has been reserved
system 00:04: [io 0x0900-0x091f] has been reserved
system 00:04: [io 0x0920-0x0923] has been reserved
system 00:04: [io 0x0924] has been reserved
system 00:04: [io 0x0370-0x0377] has been reserved
system 00:04: [io 0x0ca0-0x0ca7] has been reserved
system 00:04: [io 0x0ca9-0x0cab] has been reserved
system 00:04: [io 0x0cad-0x0caf] has been reserved
system 00:04: [io 0x0cb0-0x0cbf] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:05: [io 0x0ca8] has been reserved
system 00:05: [io 0x0cac] has been reserved
system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
system 00:06: [mem 0xe0000000-0xe3efffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xe4000000-0xe7ffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xe3f00000-0xe3ffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xdf900000-0xdf901fff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xd3000000-0xd3001fff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:02:00.1: can't claim BAR 6 [mem 0xdc000000-0xdc03ffff pref]: address conflict with 0000:02:00.0 [mem 0xdc000000-0xdc03ffff pref]
pci 0000:01:00.1: can't claim BAR 6 [mem 0xdc800000-0xdc83ffff pref]: address conflict with 0000:01:00.0 [mem 0xdc800000-0xdc83ffff pref]
pci 0000:02:00.1: BAR 6: assigned [mem 0xdc040000-0xdc07ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 02]
pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdc7fffff]
pci 0000:00:01.0: bridge window [mem 0xd9000000-0xd90fffff 64bit pref]
pci 0000:01:00.1: BAR 6: assigned [mem 0xdc840000-0xdc87ffff pref]
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xdc800000-0xdcffffff]
pci 0000:00:01.1: bridge window [mem 0xd9100000-0xd91fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 04]
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:03.0: PCI bridge to [bus 05]
pci 0000:00:03.0: bridge window [io 0xf000-0xffff]
pci 0000:00:03.0: bridge window [mem 0xdd000000-0xddffffff]
pci 0000:00:11.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:0a:00.0: PCI bridge to [bus 0b]
pci 0000:0a:00.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:0a:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:09:00.0: PCI bridge to [bus 0a-0b]
pci 0000:09:00.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:09:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:09:01.0: PCI bridge to [bus 0c]
pci 0000:09:01.0: bridge window [mem 0xdf700000-0xdf7fffff]
pci 0000:08:00.0: PCI bridge to [bus 09-0c]
pci 0000:08:00.0: bridge window [mem 0xde000000-0xdf7fffff]
pci 0000:08:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 08-0c]
pci 0000:00:1c.7: bridge window [mem 0xde000000-0xdf7fffff]
pci 0000:00:1c.7: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0x1fff window]
pci_bus 0000:00: resource 8 [io 0xe000-0xffff window]
pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 10 [mem 0xd8000000-0xdfffffff window]
pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdc7fffff]
pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd90fffff 64bit pref]
pci_bus 0000:01: resource 1 [mem 0xdc800000-0xdcffffff]
pci_bus 0000:01: resource 2 [mem 0xd9100000-0xd91fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xf000-0xffff]
pci_bus 0000:05: resource 1 [mem 0xdd000000-0xddffffff]
pci_bus 0000:08: resource 1 [mem 0xde000000-0xdf7fffff]
pci_bus 0000:08: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:09: resource 1 [mem 0xde000000-0xdf7fffff]
pci_bus 0000:09: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:0a: resource 1 [mem 0xde000000-0xdeffffff]
pci_bus 0000:0a: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:0b: resource 1 [mem 0xde000000-0xdeffffff]
pci_bus 0000:0b: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:0c: resource 1 [mem 0xdf700000-0xdf7fffff]
pci_bus 0000:0d: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:0d: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:0d: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:0d: resource 7 [io 0x0d00-0x1fff window]
pci_bus 0000:0d: resource 8 [io 0xe000-0xffff window]
pci_bus 0000:0d: resource 9 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0d: resource 10 [mem 0xd8000000-0xdfffffff window]
pci_bus 0000:0d: resource 11 [mem 0xfed40000-0xfed44fff window]
pci 0000:40:01.0: PCI bridge to [bus 41]
pci 0000:40:03.0: PCI bridge to [bus 42]
pci_bus 0000:40: resource 4 [io 0x2000-0x3fff window]
pci_bus 0000:40: resource 5 [io 0x4000-0x5fff window]
pci_bus 0000:40: resource 6 [io 0x6000-0x7fff window]
pci_bus 0000:40: resource 7 [io 0x8000-0x9fff window]
pci_bus 0000:40: resource 8 [io 0xa000-0xbfff window]
pci_bus 0000:40: resource 9 [io 0xc000-0xdfff window]
pci_bus 0000:40: resource 10 [mem 0xd0000000-0xd7ffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:0b:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 35000K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc92f0000-0xcd2f0000] (64MB) mapped at [00000000a2dbc0ad-00000000e89eaab2]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: Signaling PME with IRQ 25
pcieport 0000:00:01.1: Signaling PME with IRQ 26
pcieport 0000:00:02.0: Signaling PME with IRQ 27
pcieport 0000:00:02.2: Signaling PME with IRQ 28
pcieport 0000:00:03.0: Signaling PME with IRQ 29
pcieport 0000:00:11.0: Signaling PME with IRQ 30
pcieport 0000:00:1c.0: Signaling PME with IRQ 31
pcieport 0000:00:1c.7: Signaling PME with IRQ 32
pcieport 0000:40:01.0: Signaling PME with IRQ 34
pcieport 0000:40:03.0: Signaling PME with IRQ 35
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: using zlib compression
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xdf8fd000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.17-1-pve ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 22, io mem 0xdf8fe000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.17-1-pve ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Bridge firewalling registered
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x206d7, pf=0x1, revision=0x714
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1367670038, 0)->(1424308908, -56638870)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 10:834:657
rtc_cmos 00:01: setting system clock to 2018-11-09 00:40:18 UTC (1541724018)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 2412K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel memory: 2008K
Freeing unused kernel memory: 1872K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.137 (May 11, 2014)
mpt3sas version 17.100.00.00 loaded
mpt3sas 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (65916284 kB)
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address c8:1f:66:e6:ae:28
tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 24, max_msix_vectors: -1
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 40
mpt2sas_cm0: iomem(0x00000000ddff0000), mapped(0x000000003b4721e8), size(65536)
mpt2sas_cm0: ioport(0x000000000000fc00), size(256)
tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address c8:1f:66:e6:ae:29
tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:02:00.0 eth2: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address c8:1f:66:e6:ae:2a
tg3 0000:02:00.0 eth2: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:02:00.0 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.0 eth2: dma_rwctrl[00000001] dma_mask[64-bit]
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff100 irq 38
ata2: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff180 irq 38
ata3: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff200 irq 38
ata4: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff280 irq 38
ata5: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff300 irq 38
ata6: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff380 irq 38
mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
mpt2sas_cm0: sending diag reset !!
tg3 0000:02:00.1 eth3: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address c8:1f:66:e6:ae:2b
tg3 0000:02:00.1 eth3: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:02:00.1 eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.1 eth3: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:02:00.0 eno3: renamed from eth2
tg3 0000:02:00.1 eno4: renamed from eth3
tg3 0000:01:00.1 eno2: renamed from eth1
usb 1-1: new high-speed USB device number 2 using ehci-pci
tg3 0000:01:00.0 eno1: renamed from eth0
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata1: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-1.4: new low-speed USB device number 3 using ehci-pci
usb 1-1.4: New USB device found, idVendor=046d, idProduct=c31c
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: USB Keyboard
usb 1-1.4: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver usbkbd
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C31C.0001/input/input1
tsc: Refined TSC clocksource calibration: 1999.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a85afc727, max_idle_ns: 881590685098 ns
hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C31C.0002/input/input2
usb 1-1.6: new high-speed USB device number 4 using ehci-pci
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input1
usb 1-1.6: New USB device found, idVendor=413c, idProduct=a001
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: Gadget USB HUB
usb 1-1.6: Manufacturer: no manufacturer
usb 1-1.6: SerialNumber: 0123456789
hub 1-1.6:1.0: USB hub found
hub 1-1.6:1.0: 6 ports detected
usb 1-1.6.1: new high-speed USB device number 5 using ehci-pci
mpt2sas_cm0: diag reset: SUCCESS
mpt2sas_cm0: Allocated physical memory: size(6336 kB)
mpt2sas_cm0: Current Controller Queue Depth(2808),Max Controller Queue Depth(2879)
mpt2sas_cm0: Scatter Gather Elements per IO(128)
mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100)
mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100)
mpt2sas_cm0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.02.04.00)
mpt2sas_cm0: Protocol=(
Initiator
,Target
),
Capabilities=(
Raid
,TLR
,EEDP
,Snapshot Buffer
,Diag Trace Buffer
,Task Set Full
,NCQ
)
scsi host0: Fusion MPT SAS Host
mpt2sas_cm0: sending port enable !!
usb 1-1.6.1: New USB device found, idVendor=0624, idProduct=0249
usb 1-1.6.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
usb 1-1.6.1: Product: Keyboard/Mouse Function
usb 1-1.6.1: Manufacturer: Avocent
usb 1-1.6.1: SerialNumber: 20121018
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.0/0003:0624:0249.0003/input/input3
hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input0
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.1/0003:0624:0249.0004/input/input4
hid-generic 0003:0624:0249.0004: input,hidraw3: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input1
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.2/0003:0624:0249.0005/input/input5
hid-generic 0003:0624:0249.0005: input,hidraw4: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input2
usbcore: registered new interface driver usbmouse
clocksource: Switched to clocksource tsc
mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5b8ca3a0e9a9d800), phys(8)
mpt2sas_cm0: expander_add: handle(0x000a), parent(0x0001), sas_addr(0x500056b37789abff), phys(22)
mpt2sas_cm0: port enable: SUCCESS
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
scsi 0:0:0:0: SATA: handle(0x000f), sas_addr(0x500056b37789abee), phy(14), device_name(0x0000000000000000)
scsi 0:0:0:0: enclosure logical id (0x500056b36789abff), slot(0)
scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:1:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
scsi 0:0:1:0: SATA: handle(0x000b), sas_addr(0x500056b37789abe4), phy(4), device_name(0x0000000000000000)
scsi 0:0:1:0: enclosure logical id (0x500056b36789abff), slot(6)
scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:2:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
scsi 0:0:2:0: SATA: handle(0x000c), sas_addr(0x500056b37789abe5), phy(5), device_name(0x0000000000000000)
scsi 0:0:2:0: enclosure logical id (0x500056b36789abff), slot(9)
scsi 0:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:3:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
scsi 0:0:3:0: SATA: handle(0x000d), sas_addr(0x500056b37789abe6), phy(6), device_name(0x0000000000000000)
scsi 0:0:3:0: enclosure logical id (0x500056b36789abff), slot(7)
scsi 0:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:4:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
scsi 0:0:4:0: SATA: handle(0x000e), sas_addr(0x500056b37789abe7), phy(7), device_name(0x0000000000000000)
scsi 0:0:4:0: enclosure logical id (0x500056b36789abff), slot(8)
scsi 0:0:4:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:5:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
scsi 0:0:5:0: SATA: handle(0x0010), sas_addr(0x500056b37789abef), phy(15), device_name(0x0000000000000000)
scsi 0:0:5:0: enclosure logical id (0x500056b36789abff), slot(3)
scsi 0:0:5:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:6:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
scsi 0:0:6:0: SATA: handle(0x0011), sas_addr(0x500056b37789abf0), phy(16), device_name(0x0000000000000000)
scsi 0:0:6:0: enclosure logical id (0x500056b36789abff), slot(1)
scsi 0:0:6:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:7:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
scsi 0:0:7:0: SATA: handle(0x0012), sas_addr(0x500056b37789abf1), phy(17), device_name(0x0000000000000000)
scsi 0:0:7:0: enclosure logical id (0x500056b36789abff), slot(4)
scsi 0:0:7:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:8:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
scsi 0:0:8:0: SATA: handle(0x0013), sas_addr(0x500056b37789abf2), phy(18), device_name(0x0000000000000000)
scsi 0:0:8:0: enclosure logical id (0x500056b36789abff), slot(2)
scsi 0:0:8:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:9:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
scsi 0:0:9:0: SATA: handle(0x0014), sas_addr(0x500056b37789abf3), phy(19), device_name(0x0000000000000000)
scsi 0:0:9:0: enclosure logical id (0x500056b36789abff), slot(5)
scsi 0:0:9:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:10:0: scsih_slave_alloc : sas_device->starget set to starget @ 1888
sd 0:0:0:0: Power-on or device reset occurred
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Power-on or device reset occurred
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:2:0: Power-on or device reset occurred
sd 0:0:2:0: Attached scsi generic sg2 type 0
sd 0:0:3:0: Power-on or device reset occurred
sd 0:0:3:0: Attached scsi generic sg3 type 0
sd 0:0:4:0: Power-on or device reset occurred
sd 0:0:4:0: Attached scsi generic sg4 type 0
sd 0:0:5:0: Power-on or device reset occurred
sd 0:0:5:0: Attached scsi generic sg5 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:6:0: Attached scsi generic sg6 type 0
sd 0:0:6:0: Power-on or device reset occurred
sd 0:0:7:0: Power-on or device reset occurred
sd 0:0:7:0: Attached scsi generic sg7 type 0
sd 0:0:8:0: Attached scsi generic sg8 type 0
sd 0:0:8:0: Power-on or device reset occurred
sd 0:0:9:0: Power-on or device reset occurred
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 7f 00 00 08
sd 0:0:9:0: Attached scsi generic sg9 type 0
sd 0:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:2:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:3:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 7f 00 00 08
sd 0:0:4:0: [sde] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:5:0: [sdf] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:2:0: [sdc] Write Protect is off
sd 0:0:2:0: [sdc] Mode Sense: 7f 00 00 08
sd 0:0:3:0: [sdd] Write Protect is off
sd 0:0:3:0: [sdd] Mode Sense: 7f 00 00 08
sd 0:0:9:0: [sdj] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:4:0: [sde] Write Protect is off
sd 0:0:4:0: [sde] Mode Sense: 7f 00 00 08
sd 0:0:7:0: [sdh] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:6:0: [sdg] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:8:0: [sdi] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:3:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:5:0: [sdf] Write Protect is off
sd 0:0:5:0: [sdf] Mode Sense: 7f 00 00 08
sd 0:0:9:0: [sdj] Write Protect is off
sd 0:0:9:0: [sdj] Mode Sense: 7f 00 00 08
sd 0:0:4:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:7:0: [sdh] Write Protect is off
sd 0:0:7:0: [sdh] Mode Sense: 7f 00 00 08
sd 0:0:5:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:9:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:8:0: [sdi] Write Protect is off
sd 0:0:8:0: [sdi] Mode Sense: 7f 00 00 08
sd 0:0:6:0: [sdg] Write Protect is off
sd 0:0:6:0: [sdg] Mode Sense: 7f 00 00 08
sd 0:0:7:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:8:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:6:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda9
sdb: sdb1 sdb2 sdb9
sdd: sdd1 sdd9
sdc: sdc1 sdc9
sde: sde1 sde9
sdj: sdj1 sdj9
sdf: sdf1 sdf9
sdh: sdh1 sdh9
sdg: sdg1 sdg9
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 0:0:2:0: [sdc] Attached SCSI disk
sd 0:0:4:0: [sde] Attached SCSI disk
sd 0:0:3:0: [sdd] Attached SCSI disk
sd 0:0:9:0: [sdj] Attached SCSI disk
sd 0:0:5:0: [sdf] Attached SCSI disk
sd 0:0:7:0: [sdh] Attached SCSI disk
sd 0:0:6:0: [sdg] Attached SCSI disk
sdi: sdi1 sdi9
sd 0:0:8:0: [sdi] Attached SCSI disk
raid6: sse2x1 gen() 3122 MB/s
raid6: sse2x1 xor() 2422 MB/s
raid6: sse2x2 gen() 3911 MB/s
raid6: sse2x2 xor() 2813 MB/s
raid6: sse2x4 gen() 4519 MB/s
raid6: sse2x4 xor() 3420 MB/s
raid6: using algorithm sse2x4 gen() 4519 MB/s
raid6: .... xor() 3420 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
spl: loading out-of-tree module taints kernel.
SPL: Loaded module v0.7.8-1
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
ZFS: Loaded module v0.7.8-1, ZFS pool version 5000, ZFS filesystem version 5
ip_tables: (C) 2000-2006 Netfilter Core Team
ERST: NVRAM ERST Log Address Range not implemented yet.
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Loading iSCSI transport class v2.0-870.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
systemd-journald[1691]: Received request to flush runtime journal from PID 1
ACPI Error: No handler for Region [SYSI] (000000008c7dfa79) [IPMI] (20170831/evregion-166)
ACPI Error: Region IPMI (ID=7) has no handler (20170831/exfldio-299)
No Local Variables are initialized for Method [_GHL]
No Arguments are initialized for method [_GHL]
ACPI Error: Method parse/execution failed \_SB.PMI0._GHL, AE_NOT_EXIST (20170831/psparse-550)
ACPI Error: Method parse/execution failed \_SB.PMI0._PMC, AE_NOT_EXIST (20170831/psparse-550)
ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20170831/power_meter-755)
ipmi message handler version 39.2
ipmi device interface
IPMI System Interface driver.
ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 10
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 10
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /devices/platform/pcspkr/input/input6
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
Error: Driver 'pcspkr' is already registered, aborting...
[TTM] Zone kernel: Available graphics memory: 32958142 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
fbcon: mgadrmfb (fb0) is primary device
Adding 8388604k swap on /dev/zd0. Priority:-2 extents:1 across:8388604k SSFS
ipmi_si dmi-ipmi-si.0: The BMC does not support setting the recv irq bit, compensating, but the BMC needs to be fixed.
Console: switching to colour frame buffer device 210x65
ipmi_si dmi-ipmi-si.0: Using irq 10
ipmi_si dmi-ipmi-si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
mgag200 0000:0b:00.0: fb0: mgadrmfb frame buffer device
ipmi_si dmi-ipmi-si.0: IPMI kcs interface initialized
IPMI SSIF Interface driver
[drm] Initialized mgag200 1.0.0 20110418 for 0000:0b:00.0 on minor 0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC MC0: Giving out device to module sb_edac controller Sandy Bridge SrcID#0_Ha#0: DEV 0000:3f:0e.0 (INTERRUPT)
EDAC MC1: Giving out device to module sb_edac controller Sandy Bridge SrcID#1_Ha#0: DEV 0000:7f:0e.0 (INTERRUPT)
EDAC sbridge: Ver: 1.1.2
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
Netfilter messages via NETLINK v0.30.
audit: type=1400 audit(1541724055.483:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=2416 comm="apparmor_parser"
audit: type=1400 audit(1541724055.491:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=2415 comm="apparmor_parser"
audit: type=1400 audit(1541724055.491:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=2415 comm="apparmor_parser"
audit: type=1400 audit(1541724055.491:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=2415 comm="apparmor_parser"
audit: type=1400 audit(1541724055.491:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=2415 comm="apparmor_parser"
vmbr0: port 1(eno1) entered blocking state
vmbr0: port 1(eno1) entered disabled state
device eno1 entered promiscuous mode
softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
new mount options do not match the existing superblock, will be ignored
IPv6: ADDRCONF(NETDEV_UP): vmbr0: link is not ready
audit: type=1400 audit(1541724056.099:7): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/bin/lxc-start" pid=2913 comm="apparmor_parser"
audit: type=1400 audit(1541724056.123:8): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default" pid=2939 comm="apparmor_parser"
audit: type=1400 audit(1541724056.123:9): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-cgns" pid=2939 comm="apparmor_parser"
audit: type=1400 audit(1541724056.123:10): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-mounting" pid=2939 comm="apparmor_parser"
tg3 0000:01:00.0 eno1: Link is up at 1000 Mbps, full duplex
tg3 0000:01:00.0 eno1: Flow control is off for TX and off for RX
tg3 0000:01:00.0 eno1: EEE is disabled
vmbr0: port 1(eno1) entered blocking state
vmbr0: port 1(eno1) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): vmbr0: link becomes ready
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_set: protocol 6
random: crng init done
IPv6: ADDRCONF(NETDEV_UP): veth100i0: link is not ready
vmbr0: port 2(veth100i0) entered blocking state
vmbr0: port 2(veth100i0) entered disabled state
device veth100i0 entered promiscuous mode
eth0: renamed from vethQY68BH
kauditd_printk_skb: 1 callbacks suppressed
audit: type=1400 audit(1541724665.581:12): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/fs/cgroup/unified/" pid=19147 comm="systemd" fstype="cgroup2" srcname="cgroup" flags="rw, nosuid, nodev, noexec"
audit: type=1400 audit(1541724665.581:13): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/fs/cgroup/unified/" pid=19147 comm="systemd" fstype="cgroup2" srcname="cgroup" flags="rw, nosuid, nodev, noexec"
audit: type=1400 audit(1541724665.709:14): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=19221 comm="(networkd)" flags="rw, rslave"
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
vmbr0: port 2(veth100i0) entered blocking state
vmbr0: port 2(veth100i0) entered forwarding state
audit: type=1400 audit(1541724665.841:15): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=19414 comm="(resolved)" flags="rw, rslave"
vmbr0: port 2(veth100i0) entered disabled state
device veth100i0 left promiscuous mode
vmbr0: port 2(veth100i0) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): veth100i0: link is not ready
vmbr0: port 2(veth100i0) entered blocking state
vmbr0: port 2(veth100i0) entered disabled state
device veth100i0 entered promiscuous mode
eth0: renamed from vethK7I8CQ
audit: type=1400 audit(1541724896.291:16): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/fs/cgroup/unified/" pid=24979 comm="systemd" fstype="cgroup2" srcname="cgroup" flags="rw, nosuid, nodev, noexec"
audit: type=1400 audit(1541724896.291:17): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/fs/cgroup/unified/" pid=24979 comm="systemd" fstype="cgroup2" srcname="cgroup" flags="rw, nosuid, nodev, noexec"
audit: type=1400 audit(1541724896.399:18): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=25170 comm="(networkd)" flags="rw, rslave"
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
vmbr0: port 2(veth100i0) entered blocking state
vmbr0: port 2(veth100i0) entered forwarding state
audit: type=1400 audit(1541724896.523:19): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=25216 comm="(resolved)" flags="rw, rslave"
vmbr0: port 2(veth100i0) entered disabled state
device veth100i0 left promiscuous mode
vmbr0: port 2(veth100i0) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): veth100i0: link is not ready
vmbr0: port 2(veth100i0) entered blocking state
vmbr0: port 2(veth100i0) entered disabled state
device veth100i0 entered promiscuous mode
eth0: renamed from vethCDYQLU
audit: type=1400 audit(1541725170.310:20): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/fs/cgroup/unified/" pid=34272 comm="systemd" fstype="cgroup2" srcname="cgroup" flags="rw, nosuid, nodev, noexec"
audit: type=1400 audit(1541725170.310:21): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/fs/cgroup/unified/" pid=34272 comm="systemd" fstype="cgroup2" srcname="cgroup" flags="rw, nosuid, nodev, noexec"
audit: type=1400 audit(1541725170.438:22): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=34356 comm="(networkd)" flags="rw, rslave"
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
vmbr0: port 2(veth100i0) entered blocking state
vmbr0: port 2(veth100i0) entered forwarding state
audit: type=1400 audit(1541725170.570:23): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=34525 comm="(resolved)" flags="rw, rslave"