dmesg - Prueba1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-862.11.6.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-28) (GCC) ) #1 SMP Tue Aug 14 21:49:04 UTC 2018
Command line: BOOT_IMAGE=/ROOT@/boot/vmlinuz-3.10.0-862.11.6.el7.x86_64 root=ZFS=rpool/ROOT ro rhgb quiet
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000803ff] usable
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000deb8cfff] usable
BIOS-e820: [mem 0x00000000deb90000-0x00000000df140fff] reserved
BIOS-e820: [mem 0x00000000df141000-0x00000000df395fff] ACPI NVS
BIOS-e820: [mem 0x00000000df396000-0x00000000df3a1fff] ACPI data
BIOS-e820: [mem 0x00000000df3a2000-0x00000000df3c0fff] ACPI NVS
BIOS-e820: [mem 0x00000000df3c1000-0x00000000df3c5fff] ACPI data
BIOS-e820: [mem 0x00000000df3c6000-0x00000000df408fff] ACPI NVS
BIOS-e820: [mem 0x00000000df409000-0x00000000df752fff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: System manufacturer System Product Name/P8H61-M LX, BIOS 4601 09/18/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 100000000 mask FF0000000 write-back
2 base 110000000 mask FF8000000 write-back
3 base 118000000 mask FFC000000 write-back
4 base 11C000000 mask FFE000000 write-back
5 base 11E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WP UC- UC
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 4GB, range: 256MB, type WB
reg 2, base: 4352MB, range: 128MB, type WB
reg 3, base: 4480MB, range: 64MB, type WB
reg 4, base: 4544MB, range: 32MB, type WB
reg 5, base: 4576MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 4080M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 512MB, type WB
reg 4, base: 4592MB, range: 16MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf753 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fccc0-0x000fcccf] mapped at [ffffffffff200cc0]
Base memory trampoline at [ffff9ea04007a000] 7a000 size 24576
BRK [0x11a02f000, 0x11a02ffff] PGTABLE
BRK [0x11a030000, 0x11a030fff] PGTABLE
BRK [0x11a031000, 0x11a031fff] PGTABLE
BRK [0x11a032000, 0x11a032fff] PGTABLE
BRK [0x11a033000, 0x11a033fff] PGTABLE
BRK [0x11a034000, 0x11a034fff] PGTABLE
BRK [0x11a035000, 0x11a035fff] PGTABLE
BRK [0x11a036000, 0x11a036fff] PGTABLE
BRK [0x11a037000, 0x11a037fff] PGTABLE
BRK [0x11a038000, 0x11a038fff] PGTABLE
BRK [0x11a039000, 0x11a039fff] PGTABLE
RAMDISK: [mem 0x33132000-0x35890fff]
Early table checksum verification disabled
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000df396070 0005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000df3a0318 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000df396168 0A1AE (v02 ALASKA A M I 00000015 INTL 20051117)
ACPI: FACS 00000000df3bff80 00040
ACPI: APIC 00000000df3a0410 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000df3a04a8 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000df3a04e8 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000df3a0520 00495 (v01 IdeRef IdeTable 00001000 INTL 20091112)
ACPI: SSDT 00000000df3a09b8 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000df3a1368 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011effffff]
NODE_DATA(0) allocated [mem 0x11efd9000-0x11effffff]
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x11effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0007ffff]
node 0: [mem 0x00100000-0xdeb8cfff]
node 0: [mem 0xdf409000-0xdf752fff]
node 0: [mem 0x100000000-0x11effffff]
Initmem setup node 0 [mem 0x00001000-0x11effffff]
On node 0 totalpages: 1039958
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3967 pages, LIFO batch:0
DMA32 zone: 14204 pages used for memmap
DMA32 zone: 909015 pages, LIFO batch:31
Normal zone: 1984 pages used for memmap
Normal zone: 126976 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00080000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdeb8d000-0xdeb8ffff]
PM: Registered nosave memory: [mem 0xdeb90000-0xdf140fff]
PM: Registered nosave memory: [mem 0xdf141000-0xdf395fff]
PM: Registered nosave memory: [mem 0xdf396000-0xdf3a1fff]
PM: Registered nosave memory: [mem 0xdf3a2000-0xdf3c0fff]
PM: Registered nosave memory: [mem 0xdf3c1000-0xdf3c5fff]
PM: Registered nosave memory: [mem 0xdf3c6000-0xdf408fff]
PM: Registered nosave memory: [mem 0xdf753000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf753000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 35 pages/cpu @ffff9ea15ec00000 s104920 r8192 d30248 u262144
pcpu-alloc: s104920 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1023685
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/ROOT@/boot/vmlinuz-3.10.0-862.11.6.el7.x86_64 root=ZFS=rpool/ROOT ro rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 3967644k/4702208k available (7348k kernel code, 542376k absent, 192188k reserved, 6281k data, 1836k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
x86/pti: Unmapping kernel while in userspace
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=8.
NR_IRQS:327936 nr_irqs:488 0
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3392.039 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.07 BogoMIPS (lpj=3392039)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
Initializing cgroup subsys net_prio
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Speculative Store Bypass: Vulnerable
FEATURE SPEC_CTRL Not Present
FEATURE IBPB_SUPPORT Not Present
Spectre V2 : Vulnerable: Retpoline without IBPB
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28097 entries in 110 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (54272.62 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdf141000-0xdf395fff] (2445312 bytes)
PM: Registering ACPI NVS region [mem 0xdf3a2000-0xdf3c0fff] (126976 bytes)
PM: Registering ACPI NVS region [mem 0xdf3c6000-0xdf408fff] (274432 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 19:41:46, date: 11/06/18
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT ffff9ea1569c0000 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT ffff9ea15696f400 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT ffff9ea156979800 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 10 GPEs in block 00 to 3F
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7309000-0xf730900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7307000-0xf73073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7300000-0xf7303fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7306000-0xf73063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io 0xf090-0xf09f]
pci 0000:00:1f.2: reg 0x24: [io 0xf080-0xf08f]
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7305000-0xf73050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.5: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.5: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.5: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.5: reg 0x20: [io 0xf030-0xf03f]
pci 0000:00:1f.5: reg 0x24: [io 0xf020-0xf02f]
pci 0000:01:00.0: [10de:0a20] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: [10de:0be2] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf7200000-0xf7200fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xf2300000-0xf2303fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.1: bridge window [mem 0xf2300000-0xf23fffff 64bit pref]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xf2204000-0xf2204fff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xf2200000-0xf2203fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf22fffff 64bit pref]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xb000-0xb0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xf7100000-0xf7100fff 64bit]
pci 0000:05:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00080400-0x0008ffff]
e820: reserve RAM buffer [mem 0xdeb8d000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf753000-0xdfffffff]
e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x0200-0x020f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] could not be reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0xf2400000-0xf2400fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.1: bridge window [mem 0xf2300000-0xf23fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf22fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 12 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:03: resource 2 [mem 0xf2300000-0xf23fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 2 [mem 0xf2200000-0xf22fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xf7100000-0xf71fffff]
pci_bus 0000:05: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 40316k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdab8d000-0xdeb8d000] (64MB) mapped at [ffff9ea11ab8d000-ffff9ea11eb8cfff]
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
sha1_ssse3: Using AVX optimized SHA-1 implementation
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1541533306.805:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7828
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7307000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-862.11.6.el7.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7306000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-862.11.6.el7.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: sig=0x206a7, pf=0x2, revision=0x28
microcode: Microcode Update Driver: v2.01 , Peter Oruba
PM: Hibernation image not present or could not be loaded.
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: d4115f110055db56c8d605ab752173cfb1ac54d8'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass! (rc=-19)
Magic number: 10:629:697
rtc_cmos 00:02: setting system clock to 2018-11-06 19:41:47 UTC (1541533307)
Freeing unused kernel memory: 1836k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 832k freed
Freeing unused kernel memory: 676k freed
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
zfs-generator: starting
zfs-generator: loading Dracut library from /lib/dracut-lib.sh
zfs-generator: writing extension for sysroot.mount to /run/systemd/generator/sysroot.mount.d/zfs-enhancement.conf
zfs-generator: finished
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Cannot add dependency job for unit initrd-root-fs.target, ignoring: Unit not found.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Journal Service.
wmi: Mapper loaded
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0: irq 25 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xffffc20bc0642000, 64:70:02:00:35:23, XID 0c200000 IRQ 25
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0: irq 26 for MSI/MSI-X
r8169 0000:04:00.0 eth1: RTL8168evl/8111evl at 0xffffc20bc0644000, c8:60:00:a5:69:e3, XID 0c900880 IRQ 26
r8169 0000:04:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:05:00.0: irq 27 for MSI/MSI-X
r8169 0000:05:00.0 eth2: RTL8168e/8111e at 0xffffc20bc0736000, 64:70:02:01:92:d5, XID 0c200000 IRQ 27
r8169 0000:05:00.0 eth2: jumbo features [frames: 9200 bytes, tx checksumming: ko]
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
P0 P2 P1 P3 ]
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19
ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19
ata_piix 0000:00:1f.5: MAP [
P0 -- P1 -- ]
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
usb 2-1.2: new low-speed USB device number 3 using ehci-pci
usb 2-1.2: New USB device found, idVendor=046d, idProduct=c050
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: USB-PS/2 Optical Mouse
usb 2-1.2: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input2
hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.2/input0
usb 2-1.4: new low-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 3392.293 MHz
Switched to clocksource tsc
usb 2-1.4: New USB device found, idVendor=046d, idProduct=c31c
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4: Product: USB Keyboard
usb 2-1.4: Manufacturer: Logitech
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input3
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.4/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/input/input4
hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.4/input1
ata2.01: failed to resume link (SControl 0)
ata1.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata1.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
ata2.00: ATAPI: HL-DT-ST DVDRAM GH24NS90, IN00, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS90 IN00 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
random: fast init done
spl: loading out-of-tree module taints kernel.
spl: module verification failed: signature and/or required key missing - tainting kernel
SPL: Loaded module v0.7.11-1
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
ZFS: Loaded module v0.7.11-1, ZFS pool version 5000, ZFS filesystem version 5
zfs-generator: starting
zfs-generator: loading Dracut library from /lib/dracut-lib.sh
zfs-generator: writing extension for sysroot.mount to /run/systemd/generator/sysroot.mount.d/zfs-enhancement.conf
zfs-generator: finished
random: crng init done
systemd-journald[138]: Received SIGTERM from PID 1 (systemd).
type=1404 audit(1541533315.317:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 106487 rules.
SELinux: 2048 avtab hash slots, 106487 rules.
SELinux: 8 users, 14 roles, 5009 types, 310 bools, 1 sens, 1024 cats
SELinux: 97 classes, 106487 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
type=1403 audit(1541533315.526:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 230.218ms.
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
systemd[1]: Relabelled /dev and /run in 23.191ms.
systemd-journald[1212]: Received request to flush runtime journal from PID 1
input: PC Speaker as /devices/platform/pcspkr/input/input5
cryptd: max_cpu_qlen set to 100
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20130517/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20130517/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20130517/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20130517/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000050f (\_GPE.GPIO) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei_me 0000:00:16.0: irq 28 for MSI/MSI-X
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP]
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for __generic-gcm-aes-aesni (__driver-generic-gcm-aes-aesni)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
snd_hda_intel 0000:00:1b.0: irq 29 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
iTCO_vendor_support: vendor-support=0
ppdev: user-space parallel port driver
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input15
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
asus_wmi: Disabling ACPI video driver
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.107 Thu May 24 21:54:01 PDT 2018
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.1-ioctl (2018-04-03) initialised: dm-devel@redhat.com
type=1305 audit(1541529725.050:4): audit_pid=1874 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
microcode: updated to revision 0x2e, date = 2018-04-10
FEATURE SPEC_CTRL Present
FEATURE IBPB_SUPPORT Present
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Spectre V2 : Mitigation: Full retpoline
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
r8169 0000:04:00.0 enp4s0: link down
r8169 0000:04:00.0 enp4s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
r8169 0000:05:00.0 enp5s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
r8169 0000:04:00.0 enp4s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
IPv6: enp4s0: IPv6 duplicate address fe80::c9ea:325e:2bda:dea6 detected!
IPv6: enp4s0: IPv6 duplicate address fe80::7bbb:8289:949d:2a26 detected!
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
nvidia 0000:01:00.0: irq 30 for MSI/MSI-X
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d4000-0x000d7fff window]
caller os_map_kernel_space+0xad/0xe0 [nvidia] mapping multiple BARs
resource sanity check: requesting [mem 0x000e0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window]
caller os_map_kernel_space+0xad/0xe0 [nvidia] mapping multiple BARs
fuse init (API version 7.22)
rfkill: input handler disabled
TCP: lp registered
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and for details.
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
usb 1-1.3: new high-speed USB device number 3 using ehci-pci
usb 1-1.3: New USB device found, idVendor=0781, idProduct=5567
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: USB DISK
usb 1-1.3: Manufacturer: Sandisk Corporation
usb 1-1.3: SerialNumber: VC0194150515171075000768
usb-storage 1-1.3:1.0: USB Mass Storage device detected
scsi host4: usb-storage 1-1.3:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 4:0:0:0: Direct-Access Sandisk USB Ultra 1100 PQ: 0 ANSI: 4
scsi 4:0:0:0: alua: supports implicit and explicit TPGS
scsi 4:0:0:0: alua: No target port descriptors found
scsi 4:0:0:0: alua: not attached
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 15730688 512-byte logical blocks: (8.05 GB/7.50 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sdb: detected capacity change from 8054112256 to 0
usb 1-1.3: USB disconnect, device number 3