dmesg - java28

Return To java28 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-862.14.4.el7.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-28) (GCC) ) #1 SMP Wed Sep 26 15:12:11 UTC 2018
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000efffffff] usable
BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000010fbfffff] usable
Notice: NX (Execute Disable) protection missing in CPU!
SMBIOS 2.4 present.
DMI: Xen HVM domU, BIOS 4.7.5-1.21 08/13/2018
Hypervisor detected: Xen HVM
Xen version 4.7.
Xen Platform PCI: I/O protocol version 1
Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
You might have to change the root device
from /dev/hd[a-d] to /dev/xvd[a-d]
in your root= kernel command line option
HVMOP_pagetable_dying not supported
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x10fc00 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-combining
  C0000-FFFFF write-back
MTRR variable ranges enabled:
  0 base 0000F0000000 mask 3FFFF0000000 uncachable
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
PAT configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- UC  
e820: last_pfn = 0xf0000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fb630-0x000fb63f] mapped at [ffffffffff200630]
Base memory trampoline at [ffff8b6300098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0xc1432000, 0xc1432fff] PGTABLE
BRK [0xc1433000, 0xc1433fff] PGTABLE
BRK [0xc1434000, 0xc1434fff] PGTABLE
BRK [0xc1435000, 0xc1435fff] PGTABLE
BRK [0xc1436000, 0xc1436fff] PGTABLE
RAMDISK: [mem 0x35d10000-0x36e7ffff]
Early table checksum verification disabled
ACPI: RSDP 00000000000ea020 00024 (v02    Xen)
ACPI: XSDT 00000000fc00cf40 00044 (v01    Xen      HVM 00000000 HVML 00000000)
ACPI: FACP 00000000fc00cc80 000F4 (v04    Xen      HVM 00000000 HVML 00000000)
ACPI: DSDT 00000000fc0042a0 08956 (v02    Xen      HVM 00000000 INTL 20150619)
ACPI: FACS 00000000fc004260 00040
ACPI: APIC 00000000fc00cd80 000D8 (v02    Xen      HVM 00000000 HVML 00000000)
ACPI: HPET 00000000fc00ced0 00038 (v01    Xen      HVM 00000000 HVML 00000000)
ACPI: WAET 00000000fc00cf10 00028 (v01    Xen      HVM 00000000 HVML 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000010fbfffff]
NODE_DATA(0) allocated [mem 0x10fbd8000-0x10fbfefff]
Reserving 161MB of memory at 688MB for crashkernel (System RAM: 4091MB)
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x10fbfffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009dfff]
  node   0: [mem 0x00100000-0xefffffff]
  node   0: [mem 0x100000000-0x10fbfffff]
Initmem setup node 0 [mem 0x00001000-0x10fbfffff]
On node 0 totalpages: 1047453
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 15296 pages used for memmap
  DMA32 zone: 978944 pages, LIFO batch:31
  Normal zone: 1008 pages used for memmap
  Normal zone: 64512 pages, LIFO batch:15
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 15 CPUs, 13 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
e820: [mem 0xf0000000-0xfbffffff] available for PCI devices
Booting paravirtualized kernel on Xen HVM
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:15 nr_cpu_ids:15 nr_node_ids:1
PERCPU: Embedded 35 pages/cpu @ffff8b640ae00000 s104920 r8192 d30248 u262144
pcpu-alloc: s104920 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 -- 
PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031064
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 3854224k/4452352k available (7348k kernel code, 262540k absent, 335588k reserved, 6281k data, 1844k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1
x86/pti: Unmapping kernel while in userspace
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=15.
NR_IRQS:327936 nr_irqs:952 0
xen:events: Xen HVM callback vector for event delivery is enabled
Console: colour VGA+ 80x25
console [tty1] enabled
console [ttyS0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2000.054 MHz processor
tsc: Detected 2000.056 MHz TSC
Calibrating delay loop (skipped), value calculated using timer frequency.. 
4000.11 BogoMIPS (lpj=2000056)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
random: fast init done
Initializing cgroup subsys pids
Initializing cgroup subsys net_prio
mce: CPU supports 2 MCE banks
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
FEATURE SPEC_CTRL Present
FEATURE IBPB_SUPPORT Present
Spectre V2 : Mitigation: Full retpoline
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28105 entries in 110 pages
IRQ remapping doesn't support X2APIC mode, disable x2apic.
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2683 v3 @ 2.00GHz (fam: 06, model: 3f, stepping: 02)
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
cpu 0 spinlock event irq 53
Performance Events: unsupported p6 CPU model 63 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
NMI watchdog: Shutting down hard lockup detector on all cpus
installing Xen timer for CPU 1
smpboot: Booting Node   0, Processors  #1cpu 1 spinlock event irq 59
Brought up 2 CPUs
smpboot: Max logical packages: 8
smpboot: Total of 2 processors activated (8000.22 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
atomic64 test passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time:  5:24:27, date: 10/16/18
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 0F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [0] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff window]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io  0xc320-0xc32f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
pci 0000:00:01.2: reg 0x20: [io  0xc300-0xc31f]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf1ffffff pref]
pci 0000:00:02.0: reg 0x14: [mem 0xf3400000-0xf3400fff]
pci 0000:00:03.0: [5853:0001] type 00 class 0x010000
pci 0000:00:03.0: reg 0x10: [io  0xc000-0xc0ff]
pci 0000:00:03.0: reg 0x14: [mem 0xf2000000-0xf2ffffff pref]
pci 0000:00:06.0: [5853:c000] type 00 class 0x088000
pci 0000:00:06.0: reg 0x14: [mem 0xf3000000-0xf33fffff pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
xen:balloon: Initialising balloon driver
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x10fc00000-0x10fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 62.500000 MHz counter
amd_nb: Cannot enumerate AMD northbridges
Switched to clocksource xen
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io  0x08a0-0x08a3] has been reserved
system 00:01: [io  0x0cc0-0x0ccf] has been reserved
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
xen: --> pirq=16 -> irq=8 (gsi=8)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
xen: --> pirq=17 -> irq=12 (gsi=12)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
xen: --> pirq=18 -> irq=1 (gsi=1)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
xen: --> pirq=19 -> irq=6 (gsi=6)
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
xen: --> pirq=20 -> irq=4 (gsi=4)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
xen: --> pirq=21 -> irq=7 (gsi=7)
pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:08: [io  0x10c0-0x1141] has been reserved
system 00:08: [io  0xb044-0xb047] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
xen: --> pirq=22 -> irq=23 (gsi=23)
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 17856k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xec000000-0xf0000000] (64MB) mapped at [ffff8b63ec000000-ffff8b63efffffff]
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
sha1_ssse3: Using AVX2 optimized SHA-1 implementation
sha256_ssse3: Using AVX2 optimized SHA-256 implementation
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1539667468.662:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7562
Key type big_key registered
SELinux:  Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 63
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
GHES: HEST is not enabled!
xen: --> pirq=23 -> irq=30 (gsi=30)
xen:grant_table: Grant tables using version 1 layout
Grant table initialized
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: detected 2 ports
uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c300
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-862.14.4.el7.x86_64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
PM: Hibernation image not present or could not be loaded.
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
tsc: Refined TSC clocksource calibration: 1999.999 MHz
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: e4a1b68f468aca5c2284505318fd9dad724b1303'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass! (rc=-19)
xenbus_probe_frontend: Device with no driver: device/vbd/832
xenbus_probe_frontend: Device with no driver: device/vbd/51824
xenbus_probe_frontend: Device with no driver: device/vbd/768
xenbus_probe_frontend: Device with no driver: device/vif/0
xenbus_probe_frontend: Device with no driver: device/vif/1
  Magic number: 6:130:416
rtc_cmos 00:02: setting system clock to 2018-10-16 05:24:30 UTC (1539667470)
usb 1-2: new full-speed USB device number 2 using uhci_hcd
Freeing unused kernel memory: 1844k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 832k freed
Freeing unused kernel memory: 676k freed
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected virtualization xen.
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
usb 1-2: New USB device found, idVendor=0627, idProduct=0001
usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 1-2: Product: QEMU USB Tablet
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
usb 1-2: Manufacturer: QEMU 0.10.2
usb 1-2: SerialNumber: 1
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Reached target Slices.
input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/input/input3
systemd[1]: Starting Slices.
hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
FDC 0 is a S82078B
xen_netfront: Initialising Xen virtual ethernet driver
blkfront: xvdb: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;
libata version 3.00 loaded.
ata_piix 0000:00:01.1: version 2.13
 xvdb: xvdb1
blkfront: xvdh: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;
 xvdh:
blkfront: xvda: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;
 xvda: xvda1 xvda2
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc320 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc328 irq 15
random: crng init done
EXT4-fs (xvda2): mounting ext3 file system using the ext4 subsystem
EXT4-fs (xvda2): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[94]: Received SIGTERM from PID 1 (systemd).
SELinux: 2048 avtab hash slots, 106487 rules.
SELinux: 2048 avtab hash slots, 106487 rules.
SELinux:  8 users, 14 roles, 5009 types, 310 bools, 1 sens, 1024 cats
SELinux:  97 classes, 106487 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
type=1403 audit(1539667475.171:2): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 404.511ms.
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
systemd[1]: Relabelled /dev and /run in 18.544ms.
EXT4-fs (xvda2): re-mounted. Opts: (null)
systemd-journald[339]: Received request to flush runtime journal from PID 1
input: PC Speaker as /devices/platform/pcspkr/input/input5
piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Adding 2096444k swap on /dev/xvdb1.  Priority:-1 extents:1 across:2096444k SSFS
cryptd: max_cpu_qlen set to 100
ppdev: user-space parallel port driver
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for __generic-gcm-aes-aesni (__driver-generic-gcm-aes-aesni)
intel_rapl: Found RAPL domain package
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge:  Ver: 1.1.1 
EXT4-fs (xvda1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
type=1305 audit(1539667481.211:3): audit_pid=503 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1

Return To java28 System Information