dmesg - yolo
microcode: microcode updated early to revision 0x20, date = 2018-04-10
Linux version 4.18.5-arch1-1-ARCH (builduser@heftig-12250) (gcc version 8.2.0 (GCC)) #1 SMP PREEMPT Fri Aug 24 12:48:58 UTC 2018
Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=LABEL=ROOT rw
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ddf20fff] usable
BIOS-e820: [mem 0x00000000ddf21000-0x00000000de0a3fff] reserved
BIOS-e820: [mem 0x00000000de0a4000-0x00000000de0affff] ACPI data
BIOS-e820: [mem 0x00000000de0b0000-0x00000000de128fff] reserved
BIOS-e820: [mem 0x00000000de129000-0x00000000de12efff] ACPI data
BIOS-e820: [mem 0x00000000de12f000-0x00000000de1b2fff] usable
BIOS-e820: [mem 0x00000000de1b3000-0x00000000de24cfff] ACPI NVS
BIOS-e820: [mem 0x00000000de24d000-0x00000000dea5dfff] reserved
BIOS-e820: [mem 0x00000000dea5e000-0x00000000dea5efff] usable
BIOS-e820: [mem 0x00000000dea5f000-0x00000000deaa1fff] ACPI NVS
BIOS-e820: [mem 0x00000000deaa2000-0x00000000df470fff] usable
BIOS-e820: [mem 0x00000000df471000-0x00000000df7dafff] reserved
BIOS-e820: [mem 0x00000000df7db000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xcc07b018-0xcc09b257] usable ==> usable
e820: update [mem 0xcc07b018-0xcc09b257] usable ==> usable
e820: update [mem 0xcc06a018-0xcc07a057] usable ==> usable
e820: update [mem 0xcc06a018-0xcc07a057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000cc06a017] usable
reserve setup_data: [mem 0x00000000cc06a018-0x00000000cc07a057] usable
reserve setup_data: [mem 0x00000000cc07a058-0x00000000cc07b017] usable
reserve setup_data: [mem 0x00000000cc07b018-0x00000000cc09b257] usable
reserve setup_data: [mem 0x00000000cc09b258-0x00000000ddf20fff] usable
reserve setup_data: [mem 0x00000000ddf21000-0x00000000de0a3fff] reserved
reserve setup_data: [mem 0x00000000de0a4000-0x00000000de0affff] ACPI data
reserve setup_data: [mem 0x00000000de0b0000-0x00000000de128fff] reserved
reserve setup_data: [mem 0x00000000de129000-0x00000000de12efff] ACPI data
reserve setup_data: [mem 0x00000000de12f000-0x00000000de1b2fff] usable
reserve setup_data: [mem 0x00000000de1b3000-0x00000000de24cfff] ACPI NVS
reserve setup_data: [mem 0x00000000de24d000-0x00000000dea5dfff] reserved
reserve setup_data: [mem 0x00000000dea5e000-0x00000000dea5efff] usable
reserve setup_data: [mem 0x00000000dea5f000-0x00000000deaa1fff] ACPI NVS
reserve setup_data: [mem 0x00000000deaa2000-0x00000000df470fff] usable
reserve setup_data: [mem 0x00000000df471000-0x00000000df7dafff] reserved
reserve setup_data: [mem 0x00000000df7db000-0x00000000df7fffff] usable
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000041effffff] usable
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xde0a4000 ACPI 2.0=0xde0a4000 SMBIOS=0xf04c0 MPS=0xfd420
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77-DS3H, BIOS F11a 11/13/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x41f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FF0000000 write-back
2 base 410000000 mask FF8000000 write-back
3 base 418000000 mask FFC000000 write-back
4 base 41C000000 mask FFE000000 write-back
5 base 41E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 16368M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [(____ptrval____)]
Scanning 1 areas for low memory corruption
Base memory trampoline at [(____ptrval____)] 98000 size 24576
BRK [0x11f677000, 0x11f677fff] PGTABLE
BRK [0x11f678000, 0x11f678fff] PGTABLE
BRK [0x11f679000, 0x11f679fff] PGTABLE
BRK [0x11f67a000, 0x11f67afff] PGTABLE
BRK [0x11f67b000, 0x11f67bfff] PGTABLE
BRK [0x11f67c000, 0x11f67cfff] PGTABLE
BRK [0x11f67d000, 0x11f67dfff] PGTABLE
BRK [0x11f67e000, 0x11f67efff] PGTABLE
BRK [0x11f67f000, 0x11f67ffff] PGTABLE
BRK [0x11f680000, 0x11f680fff] PGTABLE
BRK [0x11f681000, 0x11f681fff] PGTABLE
BRK [0x11f682000, 0x11f682fff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x7f715000-0x7fffefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DE0A4000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DE0A4070 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DE0ADC70 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DE0A4168 009B05 (v02 ALASKA A M I 00000012 INTL 20051117)
ACPI: FACS 0x00000000DE24BF80 000040
ACPI: APIC 0x00000000DE0ADD68 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DE0ADDE0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DE0ADE20 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DE0ADE58 000495 (v01 IdeRef IdeTable 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DE0AE2F0 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DE0AECA0 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: BGRT 0x00000000DE0AF738 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041effffff]
NODE_DATA(0) allocated [mem 0x41efef000-0x41eff2fff]
tsc: Fast TSC calibration using PIT
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000ddf20fff]
node 0: [mem 0x00000000de12f000-0x00000000de1b2fff]
node 0: [mem 0x00000000dea5e000-0x00000000dea5efff]
node 0: [mem 0x00000000deaa2000-0x00000000df470fff]
node 0: [mem 0x00000000df7db000-0x00000000df7fffff]
node 0: [mem 0x0000000100000000-0x000000041effffff]
Reserved but unavailable: 5832 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
On node 0 totalpages: 4184376
DMA zone: 64 pages used for memmap
DMA zone: 24 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14183 pages used for memmap
DMA32 zone: 907674 pages, LIFO batch:31
Normal zone: 51136 pages used for memmap
Normal zone: 3272704 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcc06a000-0xcc06afff]
PM: Registered nosave memory: [mem 0xcc07a000-0xcc07afff]
PM: Registered nosave memory: [mem 0xcc07b000-0xcc07bfff]
PM: Registered nosave memory: [mem 0xcc09b000-0xcc09bfff]
PM: Registered nosave memory: [mem 0xddf21000-0xde0a3fff]
PM: Registered nosave memory: [mem 0xde0a4000-0xde0affff]
PM: Registered nosave memory: [mem 0xde0b0000-0xde128fff]
PM: Registered nosave memory: [mem 0xde129000-0xde12efff]
PM: Registered nosave memory: [mem 0xde1b3000-0xde24cfff]
PM: Registered nosave memory: [mem 0xde24d000-0xdea5dfff]
PM: Registered nosave memory: [mem 0xdea5f000-0xdeaa1fff]
PM: Registered nosave memory: [mem 0xdf471000-0xdf7dafff]
PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288
pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 4118969
Policy zone: Normal
Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=LABEL=ROOT rw
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16163892K/16737504K available (10252K kernel code, 1297K rwdata, 3528K rodata, 1492K init, 612K bss, 573612K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 33395 entries in 131 pages
Preemptible hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
RCU priority boosting: priority 1 delay 500 ms.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
Offload RCU callbacks from CPUs: (none).
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20180531
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 3403.725 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x31100d77ff2, max_idle_ns: 440795247387 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6810.09 BogoMIPS (lpj=11345750)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Spectre V2 : Enabling Restricted Speculation for firmware calls
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 28K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (27240.37 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xde1b3000-0xde24cfff] (630784 bytes)
PM: Registering ACPI NVS region [mem 0xdea5f000-0xdeaa1fff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 7:08:53, date: 09/13/18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1536822532.209:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95638C27E000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95638C24DC00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95638C2A2400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 15 GPEs in block 00 to 3F
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7219000-0xf721900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7217000-0xf72173ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7216000-0xf72163ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e00] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io 0xf090-0xf09f]
pci 0000:00:1f.2: reg 0x24: [io 0xf080-0xf08f]
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7215000-0xf72150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.5: [8086:1e08] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.5: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.5: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.5: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.5: reg 0x20: [io 0xf030-0xf03f]
pci 0000:00:1f.5: reg 0x24: [io 0xf020-0xf02f]
pci 0000:01:00.0: [10de:1b80] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: BAR 3: assigned to efifb
pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1969:1083] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xf7100000-0xf713ffff 64bit]
pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:04:00.0: [8086:244e] type 01 class 0x060401
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
pci_bus 0000:05: extended config space not accessible
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xcc06a018-0xcfffffff]
e820: reserve RAM buffer [mem 0xcc07b018-0xcfffffff]
e820: reserve RAM buffer [mem 0xddf21000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde1b3000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdea5f000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf471000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x0200-0x020f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] has been reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf2000000-0xf2000fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:00:1c.3: PCI bridge to [bus 04-05]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:04: resource 11 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:05: resource 11 [mem 0xe0000000-0xfeafffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c6 took 20714 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c6 took 19515 usecs
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
pci 0000:03:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 9128K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xccc84000-0xd0c84000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=22 bucket_order=0
zbud: loaded
pstore: using lz4hc compression
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x306a9, pf=0x2, revision=0x20
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (441019146, 0)->(433854812, 7164334)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 2:799:116
hctosys: unable to open rtc device (rtc0)
Freeing unused kernel image memory: 1492K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel image memory: 2016K
Freeing unused kernel image memory: 568K
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7217000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.18.5-arch1-1-ARCH ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.18.5-arch1-1-ARCH xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.18.5-arch1-1-ARCH xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
ehci-pci 0000:00:1d.0: EHCI Host Controller
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7216000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.18.5-arch1-1-ARCH ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19
ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-2: new full-speed USB device number 2 using xhci_hcd
usb 4-1: new high-speed USB device number 2 using ehci-pci
usb 2-2: New USB device found, idVendor=0922, idProduct=001f, bcdDevice= 1.12
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: DYMO LabelWriter 4XL
usb 2-2: Manufacturer: DYMO
usb 2-2: SerialNumber: 18051103435326
usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
usb 2-3: new high-speed USB device number 3 using xhci_hcd
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
usb 2-3: New USB device found, idVendor=1a40, idProduct=0201, bcdDevice= 1.00
usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-3: Product: USB 2.0 Hub [MTT]
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 7 ports detected
tsc: Refined TSC clocksource calibration: 3403.347 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x310ea8327ed, max_idle_ns: 440795298069 ns
clocksource: Switched to clocksource tsc
usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.05
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: USB Receiver
usb 1-1.1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input2
usb 2-4: new high-speed USB device number 4 using xhci_hcd
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
usb 1-1.2: new full-speed USB device number 4 using ehci-pci
ata1.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATA-8: MKNSSDCR240GB, 502ABBF0, max UDMA/133
ata1.01: 468862128 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
input: Logitech Unifying Device. Wireless PID:4041 Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:4041.0004/input/input2
input: Logitech Unifying Device. Wireless PID:4041 Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:4041.0004/input/input3
input: Logitech Unifying Device. Wireless PID:4041 Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:4041.0004/input/input4
input: Logitech Unifying Device. Wireless PID:4041 System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:4041.0004/input/input5
input: Logitech Unifying Device. Wireless PID:4041 Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:4041.0004/input/input10
hid-generic 0003:046D:4041.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4041] on usb-0000:00:1a.0-1.1:1
ata1.01: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502HI 1118 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA MKNSSDCR240GB BBF0 PQ: 0 ANSI: 5
usb 1-1.2: New USB device found, idVendor=046d, idProduct=c338, bcdDevice= 4.12
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: Gaming Keyboard G610
usb 1-1.2: Manufacturer: Logitech
usb 1-1.2: SerialNumber: 0E61366D3233
input: Logitech Gaming Keyboard G610 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C338.0005/input/input15
hid-generic 0003:046D:C338.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G610] on usb-0000:00:1a.0-1.2/input0
input: Logitech Gaming Keyboard G610 Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C338.0006/input/input16
usb 2-3.6: new full-speed USB device number 5 using xhci_hcd
ata2.00: failed to resume link (SControl 30)
input: Logitech Gaming Keyboard G610 Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C338.0006/input/input17
hid-generic 0003:046D:C338.0006: input,hiddev1,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G610] on usb-0000:00:1a.0-1.2/input1
input: Logitech MX Master as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:4041.0004/input/input22
logitech-hidpp-device 0003:046D:4041.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Master] on usb-0000:00:1a.0-1.1:1
usb 2-3.6: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
usb 2-3.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-3.6: Product: CSR8510 A10
ata2.01: failed to resume link (SControl 30)
ata2.00: SATA link down (SStatus 4 SControl 30)
ata2.01: SATA link down (SStatus 4 SControl 30)
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2
sd 0:0:1:0: [sdb] Attached SCSI disk
random: fast init done
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice system-getty.slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Login Prompts.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Reached target Swap.
systemd[1]: Listening on initctl Compatibility Named Pipe.
EXT4-fs (sdb2): re-mounted. Opts: (null)
systemd-journald[235]: Received request to flush runtime journal from PID 1
EDAC ie31200: No ECC support
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
input: PC Speaker as /devices/platform/pcspkr/input/input23
ipmi message handler version 39.2
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
ipmi device interface
mousedev: PS/2 mouse device common for all mice
Linux agpgart interface v0.103
atl1c 0000:03:00.0: version 1.0.1.1-NAPI
cryptd: max_cpu_qlen set to 1000
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
gpio_ich: GPIO from 436 to 511 on gpio_ich
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
atl1c 0000:03:00.0 enp3s0: renamed from eth0
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
loop: module loaded
usb 2-4: New USB device found, idVendor=046d, idProduct=082d, bcdDevice= 0.11
usb 2-4: New USB device strings: Mfr=0, Product=2, SerialNumber=1
usb 2-4: Product: HD Pro Webcam C920
usb 2-4: SerialNumber: 9CEAA6DF
media: Linux media interface: v0.10
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia-nvlink: Nvlink Core is being initialized, major device number 238
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 396.54 Tue Aug 14 19:02:34 PDT 2018 (using threaded interrupts)
videodev: Linux video capture interface: v2.00
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 396.54 Tue Aug 14 23:08:44 PDT 2018
squashfs: version 4.0 (2009/01/31) Phillip Lougher
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
usblp 2-2:1.0: usblp2: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x0922 pid 0x001F
usbcore: registered new interface driver usblp
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d)
uvcvideo 2-4:1.0: Entity type for entity Processing 3 was not initialized!
uvcvideo 2-4:1.0: Entity type for entity Extension 6 was not initialized!
uvcvideo 2-4:1.0: Entity type for entity Extension 12 was not initialized!
uvcvideo 2-4:1.0: Entity type for entity Camera 1 was not initialized!
uvcvideo 2-4:1.0: Entity type for entity Extension 8 was not initialized!
uvcvideo 2-4:1.0: Entity type for entity Extension 9 was not initialized!
uvcvideo 2-4:1.0: Entity type for entity Extension 10 was not initialized!
uvcvideo 2-4:1.0: Entity type for entity Extension 11 was not initialized!
input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/input/input29
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
8021q: 802.1Q VLAN Support v1.8
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input30
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input31
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input32
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input33
atl1c 0000:03:00.0: atl1c: enp3s0 NIC Link is Up
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
caller _nv001112rm+0xe3/0x1d0 [nvidia] mapping multiple BARs
audit: type=1006 audit(1536822543.133:2): pid=564 uid=0 old-auid=4294967295 auid=620 tty=(none) old-ses=4294967295 ses=1 res=1
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
logitech-hidpp-device 0003:046D:4041.0004: HID++ 4.5 device connected.
tun: Universal TUN/TAP device driver, 1.6
audit: type=1006 audit(1536822553.109:3): pid=706 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
audit: type=1006 audit(1536822553.119:4): pid=714 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
usb 2-4: reset high-speed USB device number 4 using xhci_hcd
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
input: 04:52:C7:60:CF:85 as /devices/virtual/input/input34
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC 84a952d0f0b
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536825196 SOCKET 0 APIC 0 microcode 20
perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79800
perf: interrupt took too long (3135 > 3128), lowering kernel.perf_event_max_sample_rate to 63600
input: 04:52:C7:60:CF:85 as /devices/virtual/input/input35
perf: interrupt took too long (3938 > 3918), lowering kernel.perf_event_max_sample_rate to 50700
usb 2-2: USB disconnect, device number 2
usblp2: removed
usb 2-2: new full-speed USB device number 6 using xhci_hcd
usb 2-2: New USB device found, idVendor=0922, idProduct=001f, bcdDevice= 1.12
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: DYMO LabelWriter 4XL
usb 2-2: Manufacturer: DYMO
usb 2-2: SerialNumber: 18051103435326
usblp 2-2:1.0: usblp2: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x0922 pid 0x001F
input: 04:52:C7:60:CF:85 as /devices/virtual/input/input36
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC 71c3f6183902
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536859271 SOCKET 0 APIC 0 microcode 20
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC 740a8673a22a
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536860006 SOCKET 0 APIC 0 microcode 20
audit: type=1006 audit(1536861447.121:5): pid=14944 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=4 res=1
input: 04:52:C7:60:CF:85 as /devices/virtual/input/input37
traps: MediaPl~ack #26[17960] general protection ip:7f5a16576515 sp:7f59d0b20780 error:0 in libmozavcodec.so[7f5a164d4000+1a4000]
audit: type=1701 audit(1536870496.477:6): auid=1000 uid=1000 gid=985 ses=2 pid=17274 comm=4D65646961506C7E61636B20233236 exe="/usr/lib/firefox/firefox" sig=11 res=1
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC 9498afe4a6e3
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536870524 SOCKET 0 APIC 0 microcode 20
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC 9a9128348a98
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536872452 SOCKET 0 APIC 0 microcode 20
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: d00000c000010005
mce: [Hardware Error]: TSC 9d523b95fb34
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536873342 SOCKET 0 APIC 0 microcode 20
MediaPl~back #2[24629]: segfault at 0 ip 0000000000000000 sp 00007f8875efeb90 error 14
Code: Bad RIP value.
audit: type=1701 audit(1536873472.111:7): auid=1000 uid=1000 gid=985 ses=2 pid=19682 comm=4D65646961506C7E6261636B202332 exe="/usr/lib/firefox/firefox" sig=11 res=1
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC 9f14ea5078fd
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536873911 SOCKET 0 APIC 0 microcode 20
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC 9f356aa25dfc
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536873952 SOCKET 0 APIC 0 microcode 20
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC 9f3bed379e74
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536873960 SOCKET 0 APIC 0 microcode 20
mce_notify_irq: 1 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC a0c2ebaa67af
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536874454 SOCKET 0 APIC 0 microcode 20
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC a6b1a6088eab
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536876370 SOCKET 0 APIC 0 microcode 20
usb 2-2: USB disconnect, device number 6
usblp2: removed
audit: type=1006 audit(1536907353.816:8): pid=6363 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=5 res=1
usb 2-2: new full-speed USB device number 7 using xhci_hcd
usb 2-2: New USB device found, idVendor=0922, idProduct=001f, bcdDevice= 1.12
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: DYMO LabelWriter 4XL
usb 2-2: Manufacturer: DYMO
usb 2-2: SerialNumber: 18051103435326
usblp 2-2:1.0: usblp2: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x0922 pid 0x001F
input: 04:52:C7:60:CF:85 as /devices/virtual/input/input38
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC 14e4810c418b2
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536930511 SOCKET 0 APIC 0 microcode 20
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC 1571bcf61f75e
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536933363 SOCKET 0 APIC 0 microcode 20
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: d000008000010005
mce: [Hardware Error]: TSC 158d34fb4f6bd
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536933918 SOCKET 0 APIC 0 microcode 20
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC 15931da31843c
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536934037 SOCKET 0 APIC 0 microcode 20
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC 159632ad3e48f
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536934099 SOCKET 0 APIC 0 microcode 20
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC 159b1758fdfc0
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536934198 SOCKET 0 APIC 0 microcode 20
usblp2: removed
usblp 2-2:1.0: usblp2: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x0922 pid 0x001F
input: 04:52:C7:60:CF:85 as /devices/virtual/input/input39
input: 04:52:C7:60:CF:85 as /devices/virtual/input/input40
perf: interrupt took too long (4933 > 4922), lowering kernel.perf_event_max_sample_rate to 40500
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC 1a5d7046aab4c
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1536958798 SOCKET 0 APIC 0 microcode 20
usb 2-2: USB disconnect, device number 7
usblp2: removed
usb 2-2: new full-speed USB device number 8 using xhci_hcd
usb 2-2: New USB device found, idVendor=0922, idProduct=001f, bcdDevice= 1.12
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: DYMO LabelWriter 4XL
usb 2-2: Manufacturer: DYMO
usb 2-2: SerialNumber: 18051103435326
usblp 2-2:1.0: usblp2: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x0922 pid 0x001F
input: 04:52:C7:60:CF:85 as /devices/virtual/input/input41
usb 2-2: USB disconnect, device number 8
usblp2: removed
usb 2-2: new full-speed USB device number 9 using xhci_hcd
usb 2-2: New USB device found, idVendor=0922, idProduct=001f, bcdDevice= 1.12
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: DYMO LabelWriter 4XL
usb 2-2: Manufacturer: DYMO
usb 2-2: SerialNumber: 18051103435326
usblp 2-2:1.0: usblp2: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x0922 pid 0x001F
usb 2-2: USB disconnect, device number 9
usblp2: removed
input: 04:52:C7:60:CF:85 as /devices/virtual/input/input42
audit: type=1006 audit(1537001212.324:9): pid=28373 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=6 res=1
audit: type=1006 audit(1537001282.692:10): pid=28421 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=7 res=1
input: 04:52:C7:60:CF:85 as /devices/virtual/input/input43
usb 2-2: new full-speed USB device number 10 using xhci_hcd
usb 2-2: New USB device found, idVendor=0922, idProduct=001f, bcdDevice= 1.12
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: DYMO LabelWriter 4XL
usb 2-2: Manufacturer: DYMO
usb 2-2: SerialNumber: 18051103435326
usblp 2-2:1.0: usblp2: USB Bidirectional printer dev 10 if 0 alt 0 proto 2 vid 0x0922 pid 0x001F
input: 04:52:C7:60:CF:85 as /devices/virtual/input/input44
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: d000008000010005
mce: [Hardware Error]: TSC 2ab8d699d4188
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1537043347 SOCKET 0 APIC 0 microcode 20
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 237
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC 2b9b553b9aa08
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1537047921 SOCKET 0 APIC 0 microcode 20
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 9000004000010005
mce: [Hardware Error]: TSC 2ba900e83f47b
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1537048197 SOCKET 0 APIC 0 microcode 20
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: d000008000010005
mce: [Hardware Error]: TSC 2bae5cee7f81f
mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1537048305 SOCKET 0 APIC 0 microcode 20
perf: interrupt took too long (6207 > 6166), lowering kernel.perf_event_max_sample_rate to 32100