dmesg - pho
Linux version 4.10.0-38-generic (buildd@lgw01-amd64-059) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #42~16.04.1-Ubuntu SMP Tue Oct 10 16:32:20 UTC 2017 (Ubuntu 4.10.0-38.42~16.04.1-generic 4.10.17)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000aabd1fff] usable
BIOS-e820: [mem 0x00000000aabd2000-0x00000000aacf8fff] reserved
BIOS-e820: [mem 0x00000000aacf9000-0x00000000aacfafff] usable
BIOS-e820: [mem 0x00000000aacfb000-0x00000000aad8dfff] reserved
BIOS-e820: [mem 0x00000000aad8e000-0x00000000aad8efff] usable
BIOS-e820: [mem 0x00000000aad8f000-0x00000000aadb7fff] reserved
BIOS-e820: [mem 0x00000000aadb8000-0x00000000aadc7fff] usable
BIOS-e820: [mem 0x00000000aadc8000-0x00000000aade7fff] reserved
BIOS-e820: [mem 0x00000000aade8000-0x00000000aaf18fff] usable
BIOS-e820: [mem 0x00000000aaf19000-0x00000000aafe7fff] ACPI NVS
BIOS-e820: [mem 0x00000000aafe8000-0x00000000aaffcfff] usable
BIOS-e820: [mem 0x00000000aaffd000-0x00000000aaffffff] ACPI data
BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff980000-0x00000000ffbfffff] reserved
BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000014fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: ASUSTeK Computer Inc. N73SM/N73SM, BIOS N73SM.302 08/14/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x14fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FE0000000 write-back
2 base 0A0000000 mask FF8000000 write-back
3 base 0A8000000 mask FFC000000 write-back
4 base 0AB000000 mask FFF000000 uncachable
5 base 100000000 mask FC0000000 write-back
6 base 140000000 mask FF0000000 write-back
7 base 14FE00000 mask FFFE00000 uncachable
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
total RAM covered: 4014M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 4M num_reg: 8 lose cover RAM: 0G
e820: update [mem 0xab000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xaaffd max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcc70-0x000fcc7f] mapped at [ffff8fa3c00fcc70]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8fa3c0098000] 98000 size 24576
reserving inaccessible SNB gfx pages
BRK [0x112e28000, 0x112e28fff] PGTABLE
BRK [0x112e29000, 0x112e29fff] PGTABLE
BRK [0x112e2a000, 0x112e2afff] PGTABLE
BRK [0x112e2b000, 0x112e2bfff] PGTABLE
BRK [0x112e2c000, 0x112e2cfff] PGTABLE
BRK [0x112e2d000, 0x112e2dfff] PGTABLE
BRK [0x112e2e000, 0x112e2efff] PGTABLE
BRK [0x112e2f000, 0x112e2ffff] PGTABLE
BRK [0x112e30000, 0x112e30fff] PGTABLE
BRK [0x112e31000, 0x112e31fff] PGTABLE
BRK [0x112e32000, 0x112e32fff] PGTABLE
RAMDISK: [mem 0x32b1a000-0x35584fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0430 000024 (v02 _ASUS_)
ACPI: XSDT 0x00000000AAFFEE18 000064 (v01 _ASUS_ NoteBook 06222004 MSFT 00010013)
ACPI: FACP 0x00000000AAF9BD98 0000F4 (v04 _ASUS_ NoteBook 06222004 MSFT 00010013)
ACPI: DSDT 0x00000000AAF7C018 00DB3E (v01 _ASUS_ NoteBook 00000000 INTL 20091112)
ACPI: FACS 0x00000000AAFE5E40 000040
ACPI: FACS 0x00000000AAFE5D40 000040
ACPI: APIC 0x00000000AAFFDF18 0000CC (v02 _ASUS_ NoteBook 06222004 MSFT 00010013)
ACPI: HPET 0x00000000AAFE6D18 000038 (v01 _ASUS_ NoteBook 06222004 AMI. 00000003)
ACPI: ECDT 0x00000000AAFE5B18 0000C1 (v01 _ASUS_ NoteBook 06222004 AMI 00000000)
ACPI: MCFG 0x00000000AAFE6C98 00003C (v01 _ASUS_ NoteBook 06222004 MSFT 00000097)
ACPI: SSDT 0x00000000AAFE7898 000757 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
ACPI: SSDT 0x00000000AAF7B018 000996 (v01 PmRef CpuPm 00003000 INTL 20091112)
ACPI: SSDT 0x00000000AAF5EA98 0002EF (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000014fdfffff]
NODE_DATA(0) allocated [mem 0x14fdd5000-0x14fdfffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000014fdfffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x000000003fffffff]
node 0: [mem 0x0000000040200000-0x00000000aabd1fff]
node 0: [mem 0x00000000aacf9000-0x00000000aacfafff]
node 0: [mem 0x00000000aad8e000-0x00000000aad8efff]
node 0: [mem 0x00000000aadb8000-0x00000000aadc7fff]
node 0: [mem 0x00000000aade8000-0x00000000aaf18fff]
node 0: [mem 0x00000000aafe8000-0x00000000aaffcfff]
node 0: [mem 0x0000000100000000-0x000000014fdfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000014fdfffff]
On node 0 totalpages: 1025736
DMA zone: 64 pages used for memmap
DMA zone: 157 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 10853 pages used for memmap
DMA32 zone: 694571 pages, LIFO batch:31
Normal zone: 5112 pages used for memmap
Normal zone: 327168 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000aba00000-0x00000000af9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 12 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0xaabd2000-0xaacf8fff]
PM: Registered nosave memory: [mem 0xaacfb000-0xaad8dfff]
PM: Registered nosave memory: [mem 0xaad8f000-0xaadb7fff]
PM: Registered nosave memory: [mem 0xaadc8000-0xaade7fff]
PM: Registered nosave memory: [mem 0xaaf19000-0xaafe7fff]
PM: Registered nosave memory: [mem 0xaaffd000-0xaaffffff]
PM: Registered nosave memory: [mem 0xab000000-0xaf9fffff]
PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
PM: Registered nosave memory: [mem 0xe4000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
PM: Registered nosave memory: [mem 0xff980000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffd7ffff]
PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff8fa50b000000 s107992 r8192 d31272 u262144
pcpu-alloc: s107992 r8192 d31272 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1009550
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3904164K/4102944K available (9070K kernel code, 1667K rwdata, 3828K rodata, 2228K init, 2364K bss, 198780K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
NR_IRQS:524544 nr_irqs:552 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2294.791 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.58 BogoMIPS (lpj=9179164)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 34229 entries in 134 pages
smpboot: Max logical packages: 8
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
core: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (18358.32 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xaaf19000-0xaafe7fff] (847872 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 5:12:01, date: 06/21/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \: Used as first EC
ACPI: \: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \: Used as boot ECDT EC to handle transactions
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8FA509C19800 000694 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8FA509CEE800 000303 (v01 PmRef ApIst 00003000 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8FA509D32400 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
ACPI : EC: EC stopped
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xdc400000-0xdc7fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe03f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf00a000-0xdf00a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdf008000-0xdf0083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xdf000000-0xdf003fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdf007000-0xdf0073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xe0b0-0xe0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xe0a0-0xe0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xe090-0xe097]
pci 0000:00:1f.2: reg 0x1c: [io 0xe080-0xe083]
pci 0000:00:1f.2: reg 0x20: [io 0xe060-0xe07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xdf006000-0xdf0067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xdf005000-0xdf0050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xe040-0xe05f]
pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xdb000000-0xdbffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xd000-0xd07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdc000000-0xdc07ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xddc00000-0xddc0ffff 64bit]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
pci 0000:04:00.0: [1b73:1000] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xdd200000-0xdd20ffff]
pci 0000:04:00.0: PME# supported from D0 D3hot
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
pci 0000:05:00.0: [1969:1083] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xdc800000-0xdc83ffff 64bit]
pci 0000:05:00.0: reg 0x18: [io 0x9000-0x907f]
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 10 11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
pci 0000:00:02.0: vgaarb: no bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xaabd2000-0xabffffff]
e820: reserve RAM buffer [mem 0xaacfb000-0xabffffff]
e820: reserve RAM buffer [mem 0xaad8f000-0xabffffff]
e820: reserve RAM buffer [mem 0xaadc8000-0xabffffff]
e820: reserve RAM buffer [mem 0xaaf19000-0xabffffff]
e820: reserve RAM buffer [mem 0xaaffd000-0xabffffff]
e820: reserve RAM buffer [mem 0x14fe00000-0x14fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x1000-0x100f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x0453] has been reserved
system 00:00: [io 0x0458-0x047f] has been reserved
system 00:00: [io 0x0500-0x057f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0454-0x0457] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs ETD0001 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] could not be reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xafa00000-0xafa00fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xafa00000-0xafa00fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x20000000-0x201fffff] has been reserved
system 00:07: [mem 0x40000000-0x401fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff window]
pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xde600000-0xdeffffff]
pci_bus 0000:02: resource 2 [mem 0xd4200000-0xd4bfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xddc00000-0xde5fffff]
pci_bus 0000:03: resource 2 [mem 0xd3700000-0xd40fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xdd200000-0xddbfffff]
pci_bus 0000:04: resource 2 [mem 0xd2c00000-0xd35fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:05: resource 1 [mem 0xdc800000-0xdd1fffff]
pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:05:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 43436K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa6bd2000-0xaabd2000] (64MB) mapped at [ffff8fa466bd2000-ffff8fa46abd1fff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1529557922.532:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xb0000000, mapped to 0xffffa825c1000000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC0] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (35 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery absent)
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xdf008000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-38-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xdf007000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.0-38-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: hcc params 0x200071b9 hci version 0x96 quirks 0x000a0440
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.10.0-38-generic xhci-hcd
usb usb3: SerialNumber: 0000:04:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.10.0-38-generic xhci-hcd
usb usb4: SerialNumber: 0000:04:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x206a7, pf=0x10, revision=0x1b
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 0e953fd717aa51b8d9e0128dd1af1f8370b86949'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 6:274:214
rtc_cmos 00:01: setting system clock to 2018-06-21 05:12:03 UTC (1529557923)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2228K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1156K
Freeing unused kernel memory: 268K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
[drm] Initialized
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
atl1c 0000:05:00.0: version 1.0.1.1-NAPI
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006100 irq 25
ata2: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006180 irq 25
ata3: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006200 irq 25
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
MXM: GUID detected in BIOS
ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
pci 0000:00:02.0: optimus capabilities: enabled, status dynamic power,
ACPI Warning: \_SB.PCI0.PEGR.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEGR.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power,
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEGR.GFX0 handle
nouveau 0000:01:00.0: enabling device (0000 -> 0003)
checking generic (b0000000 500000) vs hw (c0000000 10000000)
checking generic (b0000000 500000) vs hw (d0000000 2000000)
nouveau 0000:01:00.0: NVIDIA GF108 (0c1480a1)
[drm] Memory usable by graphics device = 2048M
checking generic (b0000000 500000) vs hw (b0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
usb 1-1: new high-speed USB device number 2 using ehci-pci
atl1c 0000:05:00.0 enp5s0: renamed from eth0
nouveau 0000:01:00.0: bios: version 70.08.92.00.07
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
usb 2-1: new high-speed USB device number 2 using ehci-pci
nouveau 0000:01:00.0: fb: 1024 MiB DDR3
vga_switcheroo: enabled
[TTM] Zone kernel: Available graphics memory: 1975642 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.0
nouveau 0000:01:00.0: DRM: DCB outp 00: 02011300 00000000
nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:01:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 1-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
hub 1-1:1.0: 6 ports detected
nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo ffff8fa501ae4c00
Console: switching to colour frame buffer device 128x48
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
acpi device:4e: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4a/LNXVIDEO:00/input/input12
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:50: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13
[drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: ATA-8: Hitachi HTS547575A9E384, JE4OA60A, max UDMA/133
ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ATAPI: Slimtype DVD A DS8A8SH, KAA2, max UDMA/100
ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: configured for UDMA/100
ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
fbcon: inteldrmfb (fb1) is primary device
fbcon: Remapping primary device, fb1, to tty 1-63
ata1.00: ATA-8: KINGSTON SV300S37A120G, 580ABBF0, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
random: fast init done
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54757 A60A PQ: 0 ANSI: 5
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8A8SH KAA2 PQ: 0 ANSI: 5
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
usb 2-1.1: new full-speed USB device number 3 using ehci-pci
usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3304
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1.1: New USB device found, idVendor=046d, idProduct=c52f
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: USB Receiver
usb 2-1.1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C52F.0001/input/input14
hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C52F.0002/input/input15
tsc: Refined TSC clocksource calibration: 2294.786 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f7e44a7, max_idle_ns: 440795281465 ns
hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
usb 1-1.2: new high-speed USB device number 4 using ehci-pci
psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040201)
psmouse serio4: elantech: Synaptics capabilities query result 0x78, 0x14, 0x0b.
psmouse serio4: elantech: Elan sample query result 1f, 00, 00
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input11
usb 1-1.2: New USB device found, idVendor=13d3, idProduct=5205
usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1.2: Product: USB2.0 UVC 2M WebCam
usb 1-1.2: Manufacturer: Azurewave
usb 1-1.2: SerialNumber: 0x0001
usb 1-1.4: new high-speed USB device number 5 using ehci-pci
i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
usb 1-1.4: New USB device found, idVendor=058f, idProduct=6366
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Mass Storage Device
usb 1-1.4: Manufacturer: Generic
usb 1-1.4: SerialNumber: 058F63666433
usb-storage 1-1.4:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-1.4:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
clocksource: Switched to clocksource tsc
raid6: sse2x1 gen() 5929 MB/s
raid6: sse2x1 xor() 4650 MB/s
raid6: sse2x2 gen() 7426 MB/s
raid6: sse2x2 xor() 5390 MB/s
raid6: sse2x4 gen() 8556 MB/s
raid6: sse2x4 xor() 6435 MB/s
raid6: using algorithm sse2x4 gen() 8556 MB/s
raid6: .... xor() 6435 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg3 type 0
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target Encrypted Volumes.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
sd 6:0:0:0: [sdc] Attached SCSI removable disk
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[371]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\SBGP) (20160930/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\SBGP) (20160930/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\SBGP) (20160930/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
media: Linux media interface: v0.10
ath: phy0: Set BT/WLAN RX diversity capability
Linux video capture interface: v2.00
usbcore: registered new interface driver btusb
uvcvideo: Found UVC 1.00 device USB2.0 UVC 2M WebCam (13d3:5205)
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
uvcvideo 1-1.2:1.0: Entity type for entity Extension 7 was not initialized!
uvcvideo 1-1.2:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-1.2:1.0: Entity type for entity Camera 1 was not initialized!
uvcvideo 1-1.2:1.0: Entity type for entity Extension 4 was not initialized!
input: USB2.0 UVC 2M WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input16
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffa825c1280000, irq=17
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
Adding 7999484k swap on /dev/sda1. Priority:-1 extents:1 across:7999484k SSFS
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x1
asus_wmi: SFUN value: 0x1a0af7
input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input20
asus_wmi: Number of fans: 0
random: crng init done
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
usbcore: registered new interface driver ath3k
usb 1-1.1: USB disconnect, device number 3
audit: type=1400 audit(1529557927.562:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=821 comm="apparmor_parser"
audit: type=1400 audit(1529557927.562:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=818 comm="apparmor_parser"
audit: type=1400 audit(1529557927.562:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=818 comm="apparmor_parser"
audit: type=1400 audit(1529557927.562:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=818 comm="apparmor_parser"
audit: type=1400 audit(1529557927.562:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=818 comm="apparmor_parser"
audit: type=1400 audit(1529557927.566:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=823 comm="apparmor_parser"
audit: type=1400 audit(1529557927.566:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=824 comm="apparmor_parser"
audit: type=1400 audit(1529557927.566:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=824 comm="apparmor_parser"
audit: type=1400 audit(1529557927.566:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=822 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
usb 1-1.1: new full-speed USB device number 6 using ehci-pci
usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=3005
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
atl1c 0000:05:00.0: atl1c: enp5s0 NIC Link is Up
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
show_signal_msg: 9 callbacks suppressed
sddm[1037]: segfault at 0 ip 00007f73de61ea93 sp 00007ffe0bee0e30 error 4 in libQt5Core.so.5.6.1[7f73de36a000+4c0000]
QXcbEventReader[2051]: segfault at 7f8837387d29 ip 00007f8837387d29 sp 00007f8834e30d20 error 14 in qtscript_ru.qm[7f883744b000+2000]
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
audit: type=1400 audit(1529558081.412:20): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/2201/status" pid=2201 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1529558081.412:21): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/sys/devices/system/node/" pid=2201 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1529558081.412:22): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/2201/status" pid=2201 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1529558081.416:23): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/etc/mysql/my.cnf.fallback" pid=2201 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1529558081.440:24): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/2202/status" pid=2202 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1529558081.440:25): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/sys/devices/system/node/" pid=2202 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1529558081.440:26): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/2202/status" pid=2202 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
Web Content[15772]: segfault at 0 ip 00007f9282899f07 sp 00007ffdef726680 error 6 in libmozsandbox.so[7f928288c000+1f000]