dmesg - 1
microcode: microcode updated early to revision 0x42c, date = 2018-01-25
Linux version 4.15.0-23-generic (buildd@lgw01-amd64-055) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #25-Ubuntu SMP Wed May 23 18:02:16 UTC 2018 (Ubuntu 4.15.0-23.25-generic 4.15.18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008dbff] usable
BIOS-e820: [mem 0x000000000008dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007def1fff] usable
BIOS-e820: [mem 0x000000007def2000-0x000000007e0b3fff] reserved
BIOS-e820: [mem 0x000000007e0b4000-0x000000007e2cbfff] ACPI NVS
BIOS-e820: [mem 0x000000007e2cc000-0x000000007f347fff] reserved
BIOS-e820: [mem 0x000000007f348000-0x000000007f7fffff] ACPI NVS
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000207fffffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 2.7 present.
DMI: Sugon I620-G10/X9DR3-F, BIOS 3.2a 07/09/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x2080000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FE000000000 write-back
1 base 002000000000 mask 3FFF80000000 write-back
2 base 000080000000 mask 3FFF80000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 131072M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 0G
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7def2 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdc60-0x000fdc6f] mapped at [ (ptrval)]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 87000 size 24576
Using GB pages for direct mapping
BRK [0x4f0b3f000, 0x4f0b3ffff] PGTABLE
BRK [0x4f0b40000, 0x4f0b40fff] PGTABLE
BRK [0x4f0b41000, 0x4f0b41fff] PGTABLE
BRK [0x4f0b42000, 0x4f0b42fff] PGTABLE
BRK [0x4f0b43000, 0x4f0b43fff] PGTABLE
BRK [0x4f0b44000, 0x4f0b44fff] PGTABLE
RAMDISK: [mem 0x3174b000-0x34b9cfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007E1E4090 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000007E1F1048 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000007E1E41C0 00CE87 (v02 ALASKA A M I 00000015 INTL 20051117)
ACPI: FACS 0x000000007E2C3080 000040
ACPI: APIC 0x000000007E1F1158 000294 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000007E1F13F0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000007E1F1438 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: SRAT 0x000000007E1F1478 000530 (v01 A M I AMI SRAT 00000001 AMI. 00000000)
ACPI: SLIT 0x000000007E1F19A8 000030 (v01 A M I AMI SLIT 00000000 AMI. 00000000)
ACPI: HPET 0x000000007E1F19D8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: PRAD 0x000000007E1F1A10 0000BE (v02 PRADID PRADTID 00000001 MSFT 03000001)
ACPI: SPMI 0x000000007E1F1AD0 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000)
ACPI: SSDT 0x000000007E1F1B10 0D0CB0 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: EINJ 0x000000007E2C27C0 000130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 0x000000007E2C28F0 000230 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 0x000000007E2C2B20 0000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 0x000000007E2C2BC8 000030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: DMAR 0x000000007E2C2BF8 000160 (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 0 -> APIC 0x16 -> Node 0
SRAT: PXM 0 -> APIC 0x17 -> Node 0
SRAT: PXM 0 -> APIC 0x18 -> Node 0
SRAT: PXM 0 -> APIC 0x19 -> Node 0
SRAT: PXM 1 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x25 -> Node 1
SRAT: PXM 1 -> APIC 0x26 -> Node 1
SRAT: PXM 1 -> APIC 0x27 -> Node 1
SRAT: PXM 1 -> APIC 0x28 -> Node 1
SRAT: PXM 1 -> APIC 0x29 -> Node 1
SRAT: PXM 1 -> APIC 0x30 -> Node 1
SRAT: PXM 1 -> APIC 0x31 -> Node 1
SRAT: PXM 1 -> APIC 0x32 -> Node 1
SRAT: PXM 1 -> APIC 0x33 -> Node 1
SRAT: PXM 1 -> APIC 0x34 -> Node 1
SRAT: PXM 1 -> APIC 0x35 -> Node 1
SRAT: PXM 1 -> APIC 0x36 -> Node 1
SRAT: PXM 1 -> APIC 0x37 -> Node 1
SRAT: PXM 1 -> APIC 0x38 -> Node 1
SRAT: PXM 1 -> APIC 0x39 -> Node 1
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x107fffffff]
ACPI: SRAT: Node 1 PXM 1 [mem 0x1080000000-0x207fffffff]
NUMA: Initialized distance table, cnt=2
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x107fffffff] -> [mem 0x00000000-0x107fffffff]
NODE_DATA(0) allocated [mem 0x107ffd5000-0x107fffffff]
NODE_DATA(1) allocated [mem 0x207ffd4000-0x207fffefff]
tsc: Fast TSC calibration using PIT
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000207fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000008cfff]
node 0: [mem 0x0000000000100000-0x000000007def1fff]
node 0: [mem 0x0000000100000000-0x000000107fffffff]
node 1: [mem 0x0000001080000000-0x000000207fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000107fffffff]
On node 0 totalpages: 16768638
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3980 pages, LIFO batch:0
DMA32 zone: 7996 pages used for memmap
DMA32 zone: 511730 pages, LIFO batch:31
Normal zone: 253952 pages used for memmap
Normal zone: 16252928 pages, LIFO batch:31
Initmem setup node 1 [mem 0x0000001080000000-0x000000207fffffff]
On node 1 totalpages: 16777216
Normal zone: 262144 pages used for memmap
Normal zone: 16777216 pages, LIFO batch:31
Reserved but unavailable: 116 pages
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x20] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x22] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x24] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x26] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x21] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x23] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x25] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x27] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 40 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0008d000-0x0008dfff]
PM: Registered nosave memory: [mem 0x0008e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7def2000-0x7e0b3fff]
PM: Registered nosave memory: [mem 0x7e0b4000-0x7e2cbfff]
PM: Registered nosave memory: [mem 0x7e2cc000-0x7f347fff]
PM: Registered nosave memory: [mem 0x7f348000-0x7f7fffff]
PM: Registered nosave memory: [mem 0x7f800000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:40 nr_cpu_ids:40 nr_node_ids:2
percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 20 21 22 23 24 25
pcpu-alloc: [0] 26 27 28 29 -- -- -- -- [1] 10 11 12 13 14 15 16 17
pcpu-alloc: [1] 18 19 30 31 32 33 34 35 [1] 36 37 38 39 -- -- -- --
Built 2 zonelists, mobility grouping on. Total pages: 33021677
Policy zone: Normal
LSM: command line set 'apparmor' security module(s).
DMAR: IOMMU enabled
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 159744 bytes
log_buf_len min size: 262144 bytes
log_buf_len: 524288 bytes
early log buf free: 245348(93%)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 131930360K/134183416K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2408K init, 2416K bss, 2253056K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=40, Nodes=2
Kernel/User page tables isolation: enabled
ftrace: allocating 39083 entries in 153 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=40.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=40
NR_IRQS: 524544, nr_irqs: 1560, preallocated irqs: 16
Console: colour VGA+ 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI: 2 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffe000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0466 ecap f020de
DMAR: DRHD base: 0x000000cfffc000 flags: 0x1
DMAR: dmar1: reg_base_addr cfffc000 ver 1:0 cap d2078c106f0466 ecap f020de
DMAR: RMRR base: 0x0000007f217000 end: 0x0000007f225fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffe000 proximity domain: 0x1
DMAR: RHSA base: 0x000000cfffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 3 under DRHD base 0xfbffe000 IOMMU 0
DMAR-IR: IOAPIC id 0 under DRHD base 0xcfffc000 IOMMU 1
DMAR-IR: IOAPIC id 2 under DRHD base 0xcfffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xcfffc000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 2800.129 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.25 BogoMIPS (lpj=11200516)
pid_max: default: 40960 minimum: 320
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 27 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Spectre V2 : Enabling Restricted Speculation for firmware calls
Speculative Store Bypass: Vulnerable
Freeing SMP alternatives memory: 36K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz (family: 0x6, model: 0x3e, stepping: 0x4)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9
.... node #1, CPUs: #10 #11 #12 #13 #14 #15 #16 #17 #18 #19
.... node #0, CPUs: #20 #21 #22 #23 #24 #25 #26 #27 #28 #29
.... node #1, CPUs: #30 #31 #32 #33 #34 #35 #36 #37 #38 #39
smp: Brought up 2 nodes, 40 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 40 processors activated (224055.98 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7e0b4000-0x7e2cbfff] (2195456 bytes)
PM: Registering ACPI NVS region [mem 0x7f348000-0x7f7fffff] (4947968 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 16384 (order: 8, 1048576 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 6:09:47, date: 06/16/18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1529129387.280:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: GPE 0x10 active on init
ACPI: GPE 0x1B active on init
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0x9fff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
pci_bus 0000:00: root bus resource [bus 00-7e]
pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0e04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400
pci 0000:00:03.0: enabling Extended Tags
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:0e0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xcff1c000-0xcff1ffff 64bit]
pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xcff18000-0xcff1bfff 64bit]
pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xcff14000-0xcff17fff 64bit]
pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xcff10000-0xcff13fff 64bit]
pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xcff0c000-0xcff0ffff 64bit]
pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xcff08000-0xcff0bfff 64bit]
pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xcff04000-0xcff07fff 64bit]
pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xcff00000-0xcff03fff 64bit]
pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000
pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xcff28000-0xcff28fff]
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xcff27000-0xcff2700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xcff26000-0xcff2600f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xcff24000-0xcff243ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xcff23000-0xcff233ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x9070-0x9077]
pci 0000:00:1f.2: reg 0x14: [io 0x9060-0x9063]
pci 0000:00:1f.2: reg 0x18: [io 0x9050-0x9057]
pci 0000:00:1f.2: reg 0x1c: [io 0x9040-0x9043]
pci 0000:00:1f.2: reg 0x20: [io 0x9020-0x903f]
pci 0000:00:1f.2: reg 0x24: [mem 0xcff22000-0xcff227ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xcff21000-0xcff210ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x9000-0x901f]
pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xcff20000-0xcff20fff 64bit]
pci 0000:01:00.0: [8086:1d74] type 01 class 0x060400
pci 0000:01:00.0: reg 0x10: [mem 0xcfc00000-0xcfc03fff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 01-03]
pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:01.0: bridge window [mem 0xcfb00000-0xcfcfffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc08fffff 64bit pref]
pci 0000:02:08.0: [8086:1d3f] type 01 class 0x060400
pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-03]
pci 0000:01:00.0: bridge window [io 0x8000-0x8fff]
pci 0000:01:00.0: bridge window [mem 0xcfb00000-0xcfbfffff]
pci 0000:01:00.0: bridge window [mem 0xc0000000-0xc08fffff 64bit pref]
pci 0000:03:00.0: [8086:1d68] type 00 class 0x010700
pci 0000:03:00.0: reg 0x10: [mem 0xc08f8000-0xc08fffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xc0000000-0xc07fffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [io 0x8100-0x81ff]
pci 0000:03:00.0: reg 0x24: [io 0x8000-0x80ff]
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: reg 0x164: [mem 0xc0800000-0xc0807fff 64bit pref]
pci 0000:03:00.0: VF(n) BAR0 space: [mem 0xc0800000-0xc08f7fff 64bit pref] (contains BAR0 for 31 VFs)
pci 0000:02:08.0: PCI bridge to [bus 03]
pci 0000:02:08.0: bridge window [io 0x8000-0x8fff]
pci 0000:02:08.0: bridge window [mem 0xcfb00000-0xcfbfffff]
pci 0000:02:08.0: bridge window [mem 0xc0000000-0xc08fffff 64bit pref]
pci 0000:04:00.0: [8086:1521] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xcfe20000-0xcfe3ffff]
pci 0000:04:00.0: reg 0x18: [io 0x7020-0x703f]
pci 0000:04:00.0: reg 0x1c: [mem 0xcfe44000-0xcfe47fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: reg 0x184: [mem 0xc0a60000-0xc0a63fff 64bit pref]
pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xc0a60000-0xc0a7ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:04:00.0: reg 0x190: [mem 0xc0a40000-0xc0a43fff 64bit pref]
pci 0000:04:00.0: VF(n) BAR3 space: [mem 0xc0a40000-0xc0a5ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:04:00.1: [8086:1521] type 00 class 0x020000
pci 0000:04:00.1: reg 0x10: [mem 0xcfe00000-0xcfe1ffff]
pci 0000:04:00.1: reg 0x18: [io 0x7000-0x701f]
pci 0000:04:00.1: reg 0x1c: [mem 0xcfe40000-0xcfe43fff]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: reg 0x184: [mem 0xc0a20000-0xc0a23fff 64bit pref]
pci 0000:04:00.1: VF(n) BAR0 space: [mem 0xc0a20000-0xc0a3ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:04:00.1: reg 0x190: [mem 0xc0a00000-0xc0a03fff 64bit pref]
pci 0000:04:00.1: VF(n) BAR3 space: [mem 0xc0a00000-0xc0a1ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:00:01.1: PCI bridge to [bus 04-05]
pci 0000:00:01.1: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.1: bridge window [mem 0xcfe00000-0xcfefffff]
pci 0000:00:01.1: bridge window [mem 0xc0a00000-0xc0afffff 64bit pref]
pci 0000:06:00.0: [1002:6759] type 00 class 0x030000
pci 0000:06:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:06:00.0: reg 0x18: [mem 0xcfd20000-0xcfd3ffff 64bit]
pci 0000:06:00.0: reg 0x20: [io 0x6000-0x60ff]
pci 0000:06:00.0: reg 0x30: [mem 0xcfd00000-0xcfd1ffff pref]
pci 0000:06:00.0: enabling Extended Tags
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.1: [1002:aa90] type 00 class 0x040300
pci 0000:06:00.1: reg 0x10: [mem 0xcfd40000-0xcfd43fff 64bit]
pci 0000:06:00.1: enabling Extended Tags
pci 0000:06:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 06]
pci 0000:00:02.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:02.0: bridge window [mem 0xcfd00000-0xcfdfffff]
pci 0000:00:02.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 07]
pci 0000:00:03.2: PCI bridge to [bus 08]
pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x9fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xcfffffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: root bus resource [bus 7f]
pci 0000:7f:08.0: [8086:0e80] type 00 class 0x088000
pci 0000:7f:09.0: [8086:0e90] type 00 class 0x088000
pci 0000:7f:0a.0: [8086:0ec0] type 00 class 0x088000
pci 0000:7f:0a.1: [8086:0ec1] type 00 class 0x088000
pci 0000:7f:0a.2: [8086:0ec2] type 00 class 0x088000
pci 0000:7f:0a.3: [8086:0ec3] type 00 class 0x088000
pci 0000:7f:0b.0: [8086:0e1e] type 00 class 0x088000
pci 0000:7f:0b.3: [8086:0e1f] type 00 class 0x088000
pci 0000:7f:0c.0: [8086:0ee0] type 00 class 0x088000
pci 0000:7f:0c.1: [8086:0ee2] type 00 class 0x088000
pci 0000:7f:0c.2: [8086:0ee4] type 00 class 0x088000
pci 0000:7f:0c.3: [8086:0ee6] type 00 class 0x088000
pci 0000:7f:0c.4: [8086:0ee8] type 00 class 0x088000
pci 0000:7f:0d.0: [8086:0ee1] type 00 class 0x088000
pci 0000:7f:0d.1: [8086:0ee3] type 00 class 0x088000
pci 0000:7f:0d.2: [8086:0ee5] type 00 class 0x088000
pci 0000:7f:0d.3: [8086:0ee7] type 00 class 0x088000
pci 0000:7f:0d.4: [8086:0ee9] type 00 class 0x088000
pci 0000:7f:0e.0: [8086:0ea0] type 00 class 0x088000
pci 0000:7f:0e.1: [8086:0e30] type 00 class 0x110100
pci 0000:7f:0f.0: [8086:0ea8] type 00 class 0x088000
pci 0000:7f:0f.1: [8086:0e71] type 00 class 0x088000
pci 0000:7f:0f.2: [8086:0eaa] type 00 class 0x088000
pci 0000:7f:0f.3: [8086:0eab] type 00 class 0x088000
pci 0000:7f:0f.4: [8086:0eac] type 00 class 0x088000
pci 0000:7f:0f.5: [8086:0ead] type 00 class 0x088000
pci 0000:7f:10.0: [8086:0eb0] type 00 class 0x088000
pci 0000:7f:10.1: [8086:0eb1] type 00 class 0x088000
pci 0000:7f:10.2: [8086:0eb2] type 00 class 0x088000
pci 0000:7f:10.3: [8086:0eb3] type 00 class 0x088000
pci 0000:7f:10.4: [8086:0eb4] type 00 class 0x088000
pci 0000:7f:10.5: [8086:0eb5] type 00 class 0x088000
pci 0000:7f:10.6: [8086:0eb6] type 00 class 0x088000
pci 0000:7f:10.7: [8086:0eb7] type 00 class 0x088000
pci 0000:7f:13.0: [8086:0e1d] type 00 class 0x088000
pci 0000:7f:13.1: [8086:0e34] type 00 class 0x110100
pci 0000:7f:13.4: [8086:0e81] type 00 class 0x088000
pci 0000:7f:13.5: [8086:0e36] type 00 class 0x110100
pci 0000:7f:16.0: [8086:0ec8] type 00 class 0x088000
pci 0000:7f:16.1: [8086:0ec9] type 00 class 0x088000
pci 0000:7f:16.2: [8086:0eca] type 00 class 0x088000
pci_bus 0000:7f: on NUMA node 0
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:01: _OSC: platform does not support [AER]
acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [io 0xa000-0xffff window]
pci_bus 0000:80: root bus resource [mem 0xd0000000-0xfbffffff window]
pci_bus 0000:80: root bus resource [bus 80-fe]
pci 0000:80:01.0: [8086:0e02] type 01 class 0x060400
pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
pci 0000:80:02.0: [8086:0e04] type 01 class 0x060400
pci 0000:80:02.0: PME# supported from D0 D3hot D3cold
pci 0000:80:03.0: [8086:0e08] type 01 class 0x060400
pci 0000:80:03.0: enabling Extended Tags
pci 0000:80:03.0: PME# supported from D0 D3hot D3cold
pci 0000:80:04.0: [8086:0e20] type 00 class 0x088000
pci 0000:80:04.0: reg 0x10: [mem 0xfb21c000-0xfb21ffff 64bit]
pci 0000:80:04.1: [8086:0e21] type 00 class 0x088000
pci 0000:80:04.1: reg 0x10: [mem 0xfb218000-0xfb21bfff 64bit]
pci 0000:80:04.2: [8086:0e22] type 00 class 0x088000
pci 0000:80:04.2: reg 0x10: [mem 0xfb214000-0xfb217fff 64bit]
pci 0000:80:04.3: [8086:0e23] type 00 class 0x088000
pci 0000:80:04.3: reg 0x10: [mem 0xfb210000-0xfb213fff 64bit]
pci 0000:80:04.4: [8086:0e24] type 00 class 0x088000
pci 0000:80:04.4: reg 0x10: [mem 0xfb20c000-0xfb20ffff 64bit]
pci 0000:80:04.5: [8086:0e25] type 00 class 0x088000
pci 0000:80:04.5: reg 0x10: [mem 0xfb208000-0xfb20bfff 64bit]
pci 0000:80:04.6: [8086:0e26] type 00 class 0x088000
pci 0000:80:04.6: reg 0x10: [mem 0xfb204000-0xfb207fff 64bit]
pci 0000:80:04.7: [8086:0e27] type 00 class 0x088000
pci 0000:80:04.7: reg 0x10: [mem 0xfb200000-0xfb203fff 64bit]
pci 0000:80:05.0: [8086:0e28] type 00 class 0x088000
pci 0000:80:05.2: [8086:0e2a] type 00 class 0x088000
pci 0000:80:05.4: [8086:0e2c] type 00 class 0x080020
pci 0000:80:05.4: reg 0x10: [mem 0xfb220000-0xfb220fff]
pci 0000:80:01.0: PCI bridge to [bus 81]
pci 0000:82:00.0: [1002:683f] type 00 class 0x030000
pci 0000:82:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:82:00.0: reg 0x18: [mem 0xfb100000-0xfb13ffff 64bit]
pci 0000:82:00.0: reg 0x20: [io 0xf000-0xf0ff]
pci 0000:82:00.0: reg 0x30: [mem 0xfb140000-0xfb15ffff pref]
pci 0000:82:00.0: enabling Extended Tags
pci 0000:82:00.0: supports D1 D2
pci 0000:82:00.0: PME# supported from D1 D2 D3hot
pci 0000:82:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:82:00.1: reg 0x10: [mem 0xfb160000-0xfb163fff 64bit]
pci 0000:82:00.1: enabling Extended Tags
pci 0000:82:00.1: supports D1 D2
pci 0000:80:02.0: PCI bridge to [bus 82]
pci 0000:80:02.0: bridge window [io 0xf000-0xffff]
pci 0000:80:02.0: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:80:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:83:00.0: [10de:128b] type 00 class 0x030000
pci 0000:83:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:83:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:83:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:83:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:83:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:83:00.0: enabling Extended Tags
pci 0000:83:00.1: [10de:0e0f] type 00 class 0x040300
pci 0000:83:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:83:00.1: enabling Extended Tags
pci 0000:80:03.0: PCI bridge to [bus 83]
pci 0000:80:03.0: bridge window [io 0xe000-0xefff]
pci 0000:80:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:80:03.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:80: on NUMA node 1
ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000
pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:0ee4] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:0ee6] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:0ee8] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:0ee5] type 00 class 0x088000
pci 0000:ff:0d.3: [8086:0ee7] type 00 class 0x088000
pci 0000:ff:0d.4: [8086:0ee9] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000
pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000
pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000
pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100
pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000
pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100
pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000
pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000
pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000
pci_bus 0000:ff: on NUMA node 1
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:06:00.0: vgaarb: setting as boot VGA device
pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:82:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:83:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:83:00.0: vgaarb: bridge control possible
pci 0000:82:00.0: vgaarb: bridge control possible
pci 0000:06:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008dc00-0x0008ffff]
e820: reserve RAM buffer [mem 0x7def2000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xcfffc000-0xcfffdfff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0a00-0x0a7f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x0400-0x0453] has been reserved
system 00:07: [io 0x0458-0x047f] has been reserved
system 00:07: [io 0x1180-0x119f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [io 0x0454-0x0457] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:0a: [mem 0xfbffe000-0xfbffffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:02:08.0: PCI bridge to [bus 03]
pci 0000:02:08.0: bridge window [io 0x8000-0x8fff]
pci 0000:02:08.0: bridge window [mem 0xcfb00000-0xcfbfffff]
pci 0000:02:08.0: bridge window [mem 0xc0000000-0xc08fffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-03]
pci 0000:01:00.0: bridge window [io 0x8000-0x8fff]
pci 0000:01:00.0: bridge window [mem 0xcfb00000-0xcfbfffff]
pci 0000:01:00.0: bridge window [mem 0xc0000000-0xc08fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-03]
pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:01.0: bridge window [mem 0xcfb00000-0xcfcfffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc08fffff 64bit pref]
pci 0000:00:01.1: PCI bridge to [bus 04-05]
pci 0000:00:01.1: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.1: bridge window [mem 0xcfe00000-0xcfefffff]
pci 0000:00:01.1: bridge window [mem 0xc0a00000-0xc0afffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 06]
pci 0000:00:02.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:02.0: bridge window [mem 0xcfd00000-0xcfdfffff]
pci 0000:00:02.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 07]
pci 0000:00:03.2: PCI bridge to [bus 08]
pci 0000:00:1e.0: PCI bridge to [bus 09]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0x9fff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window]
pci_bus 0000:00: resource 11 [mem 0x80000000-0xcfffffff window]
pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:01: resource 1 [mem 0xcfb00000-0xcfcfffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc08fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:02: resource 1 [mem 0xcfb00000-0xcfbfffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc08fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:03: resource 1 [mem 0xcfb00000-0xcfbfffff]
pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc08fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:04: resource 1 [mem 0xcfe00000-0xcfefffff]
pci_bus 0000:04: resource 2 [mem 0xc0a00000-0xc0afffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:06: resource 1 [mem 0xcfd00000-0xcfdfffff]
pci_bus 0000:06: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
pci_bus 0000:09: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:09: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:09: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:09: resource 7 [io 0x0d00-0x9fff window]
pci_bus 0000:09: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:09: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:09: resource 10 [mem 0xfed0e000-0xfed0ffff window]
pci_bus 0000:09: resource 11 [mem 0x80000000-0xcfffffff window]
pci 0000:80:01.0: PCI bridge to [bus 81]
pci 0000:80:02.0: PCI bridge to [bus 82]
pci 0000:80:02.0: bridge window [io 0xf000-0xffff]
pci 0000:80:02.0: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:80:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:80:03.0: PCI bridge to [bus 83]
pci 0000:80:03.0: bridge window [io 0xe000-0xefff]
pci 0000:80:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:80:03.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:80: resource 4 [io 0xa000-0xffff window]
pci_bus 0000:80: resource 5 [mem 0xd0000000-0xfbffffff window]
pci_bus 0000:82: resource 0 [io 0xf000-0xffff]
pci_bus 0000:82: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:82: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:83: resource 0 [io 0xe000-0xefff]
pci_bus 0000:83: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:83: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
pci 0000:06:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 53576K
DMAR: dmar0: Using Queued invalidation
DMAR: dmar1: Using Queued invalidation
DMAR: Setting RMRR:
DMAR: Setting identity map for device 0000:00:1a.0 [0x7f217000 - 0x7f225fff]
DMAR: Setting identity map for device 0000:00:1d.0 [0x7f217000 - 0x7f225fff]
DMAR: Prepare 0-16MiB unity mapping for LPC
DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
DMAR: Intel(R) Virtualization Technology for Directed I/O
iommu: Adding device 0000:00:00.0 to group 0
iommu: Adding device 0000:00:01.0 to group 1
iommu: Adding device 0000:00:01.1 to group 2
iommu: Adding device 0000:00:02.0 to group 3
iommu: Adding device 0000:00:03.0 to group 4
iommu: Adding device 0000:00:03.2 to group 5
iommu: Adding device 0000:00:04.0 to group 6
iommu: Adding device 0000:00:04.1 to group 6
iommu: Adding device 0000:00:04.2 to group 6
iommu: Adding device 0000:00:04.3 to group 6
iommu: Adding device 0000:00:04.4 to group 6
iommu: Adding device 0000:00:04.5 to group 6
iommu: Adding device 0000:00:04.6 to group 6
iommu: Adding device 0000:00:04.7 to group 6
iommu: Adding device 0000:00:05.0 to group 7
iommu: Adding device 0000:00:05.2 to group 7
iommu: Adding device 0000:00:05.4 to group 7
iommu: Adding device 0000:00:16.0 to group 8
iommu: Adding device 0000:00:16.1 to group 8
iommu: Adding device 0000:00:1a.0 to group 9
iommu: Adding device 0000:00:1d.0 to group 10
iommu: Adding device 0000:00:1e.0 to group 11
iommu: Adding device 0000:00:1f.0 to group 12
iommu: Adding device 0000:00:1f.2 to group 12
iommu: Adding device 0000:00:1f.3 to group 12
iommu: Adding device 0000:00:1f.6 to group 12
iommu: Adding device 0000:01:00.0 to group 13
iommu: Adding device 0000:02:08.0 to group 14
iommu: Adding device 0000:03:00.0 to group 15
iommu: Adding device 0000:04:00.0 to group 16
iommu: Adding device 0000:04:00.1 to group 17
iommu: Adding device 0000:06:00.0 to group 18
iommu: Adding device 0000:06:00.1 to group 18
iommu: Adding device 0000:7f:08.0 to group 19
iommu: Adding device 0000:7f:09.0 to group 20
iommu: Adding device 0000:7f:0a.0 to group 21
iommu: Adding device 0000:7f:0a.1 to group 21
iommu: Adding device 0000:7f:0a.2 to group 21
iommu: Adding device 0000:7f:0a.3 to group 21
iommu: Adding device 0000:7f:0b.0 to group 22
iommu: Adding device 0000:7f:0b.3 to group 22
iommu: Adding device 0000:7f:0c.0 to group 23
iommu: Adding device 0000:7f:0c.1 to group 23
iommu: Adding device 0000:7f:0c.2 to group 23
iommu: Adding device 0000:7f:0c.3 to group 23
iommu: Adding device 0000:7f:0c.4 to group 23
iommu: Adding device 0000:7f:0d.0 to group 24
iommu: Adding device 0000:7f:0d.1 to group 24
iommu: Adding device 0000:7f:0d.2 to group 24
iommu: Adding device 0000:7f:0d.3 to group 24
iommu: Adding device 0000:7f:0d.4 to group 24
iommu: Adding device 0000:7f:0e.0 to group 25
iommu: Adding device 0000:7f:0e.1 to group 25
iommu: Adding device 0000:7f:0f.0 to group 26
iommu: Adding device 0000:7f:0f.1 to group 26
iommu: Adding device 0000:7f:0f.2 to group 26
iommu: Adding device 0000:7f:0f.3 to group 26
iommu: Adding device 0000:7f:0f.4 to group 26
iommu: Adding device 0000:7f:0f.5 to group 26
iommu: Adding device 0000:7f:10.0 to group 27
iommu: Adding device 0000:7f:10.1 to group 27
iommu: Adding device 0000:7f:10.2 to group 27
iommu: Adding device 0000:7f:10.3 to group 27
iommu: Adding device 0000:7f:10.4 to group 27
iommu: Adding device 0000:7f:10.5 to group 27
iommu: Adding device 0000:7f:10.6 to group 27
iommu: Adding device 0000:7f:10.7 to group 27
iommu: Adding device 0000:7f:13.0 to group 28
iommu: Adding device 0000:7f:13.1 to group 28
iommu: Adding device 0000:7f:13.4 to group 28
iommu: Adding device 0000:7f:13.5 to group 28
iommu: Adding device 0000:7f:16.0 to group 29
iommu: Adding device 0000:7f:16.1 to group 29
iommu: Adding device 0000:7f:16.2 to group 29
iommu: Adding device 0000:80:01.0 to group 30
iommu: Adding device 0000:80:02.0 to group 31
iommu: Adding device 0000:80:03.0 to group 32
iommu: Adding device 0000:80:04.0 to group 33
iommu: Adding device 0000:80:04.1 to group 33
iommu: Adding device 0000:80:04.2 to group 33
iommu: Adding device 0000:80:04.3 to group 33
iommu: Adding device 0000:80:04.4 to group 33
iommu: Adding device 0000:80:04.5 to group 33
iommu: Adding device 0000:80:04.6 to group 33
iommu: Adding device 0000:80:04.7 to group 33
iommu: Adding device 0000:80:05.0 to group 34
iommu: Adding device 0000:80:05.2 to group 34
iommu: Adding device 0000:80:05.4 to group 34
iommu: Adding device 0000:82:00.0 to group 35
iommu: Adding device 0000:82:00.1 to group 35
iommu: Adding device 0000:83:00.0 to group 36
iommu: Adding device 0000:83:00.1 to group 36
iommu: Adding device 0000:ff:08.0 to group 37
iommu: Adding device 0000:ff:09.0 to group 38
iommu: Adding device 0000:ff:0a.0 to group 39
iommu: Adding device 0000:ff:0a.1 to group 39
iommu: Adding device 0000:ff:0a.2 to group 39
iommu: Adding device 0000:ff:0a.3 to group 39
iommu: Adding device 0000:ff:0b.0 to group 40
iommu: Adding device 0000:ff:0b.3 to group 40
iommu: Adding device 0000:ff:0c.0 to group 41
iommu: Adding device 0000:ff:0c.1 to group 41
iommu: Adding device 0000:ff:0c.2 to group 41
iommu: Adding device 0000:ff:0c.3 to group 41
iommu: Adding device 0000:ff:0c.4 to group 41
iommu: Adding device 0000:ff:0d.0 to group 42
iommu: Adding device 0000:ff:0d.1 to group 42
iommu: Adding device 0000:ff:0d.2 to group 42
iommu: Adding device 0000:ff:0d.3 to group 42
iommu: Adding device 0000:ff:0d.4 to group 42
iommu: Adding device 0000:ff:0e.0 to group 43
iommu: Adding device 0000:ff:0e.1 to group 43
iommu: Adding device 0000:ff:0f.0 to group 44
iommu: Adding device 0000:ff:0f.1 to group 44
iommu: Adding device 0000:ff:0f.2 to group 44
iommu: Adding device 0000:ff:0f.3 to group 44
iommu: Adding device 0000:ff:0f.4 to group 44
iommu: Adding device 0000:ff:0f.5 to group 44
iommu: Adding device 0000:ff:10.0 to group 45
iommu: Adding device 0000:ff:10.1 to group 45
iommu: Adding device 0000:ff:10.2 to group 45
iommu: Adding device 0000:ff:10.3 to group 45
iommu: Adding device 0000:ff:10.4 to group 45
iommu: Adding device 0000:ff:10.5 to group 45
iommu: Adding device 0000:ff:10.6 to group 45
iommu: Adding device 0000:ff:10.7 to group 45
iommu: Adding device 0000:ff:13.0 to group 46
iommu: Adding device 0000:ff:13.1 to group 46
iommu: Adding device 0000:ff:13.4 to group 46
iommu: Adding device 0000:ff:13.5 to group 46
iommu: Adding device 0000:ff:16.0 to group 47
iommu: Adding device 0000:ff:16.1 to group 47
iommu: Adding device 0000:ff:16.2 to group 47
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=25 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: Signaling PME with IRQ 25
pcieport 0000:00:01.1: Signaling PME with IRQ 26
pcieport 0000:00:02.0: Signaling PME with IRQ 28
pcieport 0000:00:03.0: Signaling PME with IRQ 30
pcieport 0000:00:03.2: Signaling PME with IRQ 31
pcieport 0000:80:01.0: Signaling PME with IRQ 33
pcieport 0000:80:02.0: Signaling PME with IRQ 35
pcieport 0000:80:03.0: Signaling PME with IRQ 37
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x3E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: using zlib compression
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xcff24000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.0-23-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xcff23000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.0-23-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x306e4, pf=0x1, revision=0x42c
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1675951110, 0)->(1806981929, -131030819)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: d77482c25b833df502ed38a87c5d7f330fdff3cb'
zswap: loaded using pool lz4/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 6:452:165
rtc_cmos 00:05: setting system clock to 2018-06-16 06:09:49 UTC (1529129389)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 2408K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel memory: 2008K
Freeing unused kernel memory: 1904K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
dca service started, version 1.12.1
isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
isci 0000:03:00.0: driver configured for rev: 6 silicon
isci 0000:03:00.0: OEM parameter table found in OROM
isci 0000:03:00.0: OEM SAS parameters (version: 1.0) loaded (platform)
isci 0000:03:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short}
scsi host0: isci
isci 0000:03:00.0: SCU controller 1: phy 3-0 cables: {short, short, short, short}
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
scsi host1: isci
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m2048@0xcff22000 port 0xcff22100 irq 38
ata2: SATA max UDMA/133 abar m2048@0xcff22000 port 0xcff22180 irq 38
ata3: SATA max UDMA/133 abar m2048@0xcff22000 port 0xcff22200 irq 38
ata4: SATA max UDMA/133 abar m2048@0xcff22000 port 0xcff22280 irq 38
ata5: SATA max UDMA/133 abar m2048@0xcff22000 port 0xcff22300 irq 38
ata6: SATA max UDMA/133 abar m2048@0xcff22000 port 0xcff22380 irq 38
igb 0000:04:00.0: added PHC on eth0
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 00:25:90:c3:6b:0a
igb 0000:04:00.0: eth0: PBA No: 106100-000
igb 0000:04:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
usb 1-1: new high-speed USB device number 2 using ehci-pci
igb 0000:04:00.1: added PHC on eth1
igb 0000:04:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 00:25:90:c3:6b:0b
igb 0000:04:00.1: eth1: PBA No: 106100-000
igb 0000:04:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:04:00.1 enp4s0f1: renamed from eth1
usb 2-1: new high-speed USB device number 2 using ehci-pci
igb 0000:04:00.0 enp4s0f0: renamed from eth0
VFIO - User Level meta-driver version: 0.3
vfio-pci 0000:82:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
vfio_pci: add [1002:683f[ffff:ffff]] class 0x000000/00000000
vfio_pci: add [1002:aab0[ffff:ffff]] class 0x000000/00000000
vfio-pci 0000:83:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
vfio_pci: add [10de:128b[ffff:ffff]] class 0x000000/00000000
vfio_pci: add [10de:0e0f[ffff:ffff]] class 0x000000/00000000
vfio-pci 0000:06:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
vfio_pci: add [1002:6759[ffff:ffff]] class 0x000000/00000000
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
vfio_pci: add [1002:aa90[ffff:ffff]] class 0x000000/00000000
[drm] radeon kernel modesetting enabled.
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2.00: ATA-8: PLEXTOR PX-256M5S, 1.03, max UDMA/133
ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
usb 1-1.6: new full-speed USB device number 3 using ehci-pci
usb 2-1.3: new high-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 2799.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c3fb0b68, max_idle_ns: 440795224466 ns
usb 1-1.6: New USB device found, idVendor=0557, idProduct=2221
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: Hermon USB hidmouse Device
usb 1-1.6: Manufacturer: Winbond Electronics Corp
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:0557:2221.0001/input/input2
hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.6/input0
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:0557:2221.0002/input/input3
usb 2-1.3: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.3: Product: USB2.0 Hub
hub 2-1.3:1.0: USB hub found
hub 2-1.3:1.0: 4 ports detected
hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.6/input1
usb 2-1.4: new full-speed USB device number 4 using ehci-pci
usb 2-1.4: New USB device found, idVendor=0d8c, idProduct=0014
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4: Product: USB Audio Device
usb 2-1.4: Manufacturer: C-Media Electronics Inc.
input: C-Media Electronics Inc. USB Audio Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.3/0003:0D8C:0014.0003/input/input4
hid-generic 0003:0D8C:0014.0003: input,hidraw2: USB HID v1.00 Device [C-Media Electronics Inc. USB Audio Device] on usb-0000:00:1d.0-1.4/input3
usb 2-1.3.1: new low-speed USB device number 5 using ehci-pci
usb 2-1.3.1: New USB device found, idVendor=046d, idProduct=c062
usb 2-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3.1: Product: USB Laser Mouse
usb 2-1.3.1: Manufacturer: Logitech
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.1/2-1.3.1:1.0/0003:046D:C062.0004/input/input5
hid-generic 0003:046D:C062.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-1.3.1/input0
usb 2-1.3.2: new low-speed USB device number 6 using ehci-pci
usb 2-1.3.2: New USB device found, idVendor=0a81, idProduct=0101
usb 2-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3.2: Product: USB Keyboard
usb 2-1.3.2: Manufacturer: CHESEN
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.0/0003:0A81:0101.0005/input/input6
hid-generic 0003:0A81:0101.0005: input,hidraw4: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1d.0-1.3.2/input0
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.1/0003:0A81:0101.0006/input/input7
hid-generic 0003:0A81:0101.0006: input,hidraw5: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1d.0-1.3.2/input1
sas: phy-0:0 added to port-0:0, phy_mask:0x1 (5003048010926300)
sas: DOING DISCOVERY on port 0, pid:561
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata7: end_device-0:0: dev error handler
sas: phy-1:0 added to port-1:0, phy_mask:0x1 (5003048010926300)
sas: DOING DISCOVERY on port 0, pid:564
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata8: end_device-1:0: dev error handler
ata7.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata7.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata7.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA3 ABB0 PQ: 0 ANSI: 5
sas: DONE DISCOVERY on port 0, pid:561, result:0
sas: phy-0:1 added to port-0:1, phy_mask:0x2 (5003048010926301)
sas: DOING DISCOVERY on port 1, pid:561
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata7: end_device-0:0: dev error handler
sas: ata9: end_device-0:1: dev error handler
ata8.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata8.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata8.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 1:0:0:0: Direct-Access ATA TOSHIBA DT01ACA3 ABB0 PQ: 0 ANSI: 5
sas: DONE DISCOVERY on port 0, pid:564, result:0
sas: phy-1:1 added to port-1:1, phy_mask:0x2 (5003048010926301)
sas: DOING DISCOVERY on port 1, pid:564
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata8: end_device-1:0: dev error handler
sas: ata10: end_device-1:1: dev error handler
ata9.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata9.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata9.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 0:0:1:0: Direct-Access ATA TOSHIBA DT01ACA3 ABB0 PQ: 0 ANSI: 5
sas: DONE DISCOVERY on port 1, pid:561, result:0
sas: phy-0:2 added to port-0:2, phy_mask:0x4 (5003048010926302)
sas: DOING DISCOVERY on port 2, pid:561
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata7: end_device-0:0: dev error handler
sas: ata9: end_device-0:1: dev error handler
sas: ata11: end_device-0:2: dev error handler
ata10.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata10.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata10.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 1:0:1:0: Direct-Access ATA TOSHIBA DT01ACA3 ABB0 PQ: 0 ANSI: 5
sas: DONE DISCOVERY on port 1, pid:564, result:0
sas: phy-1:2 added to port-1:2, phy_mask:0x4 (5003048010926302)
sas: DOING DISCOVERY on port 2, pid:564
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata8: end_device-1:0: dev error handler
sas: ata10: end_device-1:1: dev error handler
sas: ata12: end_device-1:2: dev error handler
ata11.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata11.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata11.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 0:0:2:0: Direct-Access ATA TOSHIBA DT01ACA3 ABB0 PQ: 0 ANSI: 5
sas: DONE DISCOVERY on port 2, pid:561, result:0
sas: phy-0:3 added to port-0:3, phy_mask:0x8 (5003048010926303)
sas: DOING DISCOVERY on port 3, pid:561
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata7: end_device-0:0: dev error handler
sas: ata9: end_device-0:1: dev error handler
sas: ata11: end_device-0:2: dev error handler
sas: ata13: end_device-0:3: dev error handler
ata12.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata12.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata12.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 1:0:2:0: Direct-Access ATA TOSHIBA DT01ACA3 ABB0 PQ: 0 ANSI: 5
sas: DONE DISCOVERY on port 2, pid:564, result:0
sas: phy-1:3 added to port-1:3, phy_mask:0x8 (5003048010926303)
sas: DOING DISCOVERY on port 3, pid:564
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata8: end_device-1:0: dev error handler
sas: ata10: end_device-1:1: dev error handler
sas: ata12: end_device-1:2: dev error handler
sas: ata14: end_device-1:3: dev error handler
ata13.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
ata13.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata13.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 0:0:3:0: Direct-Access ATA WDC WD20EARS-00M AB51 PQ: 0 ANSI: 5
sas: DONE DISCOVERY on port 3, pid:561, result:0
sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:1:0: [sdb] 4096-byte physical blocks
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:2:0: Attached scsi generic sg2 type 0
sd 0:0:2:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 0:0:3:0: Attached scsi generic sg3 type 0
sd 0:0:3:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 0:0:3:0: [sdd] Write Protect is off
sd 0:0:3:0: [sdd] Mode Sense: 00 3a 00 00
sd 0:0:3:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:2:0: [sdc] 4096-byte physical blocks
sd 0:0:2:0: [sdc] Write Protect is off
sd 0:0:2:0: [sdc] Mode Sense: 00 3a 00 00
sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 sdc3
sd 0:0:2:0: [sdc] Attached SCSI disk
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb9
sd 0:0:1:0: [sdb] Attached SCSI disk
sdd: sdd1 sdd2 sdd3
sd 0:0:3:0: [sdd] Attached SCSI disk
ata14.00: ATA-8: WDC WD20EARS-00MVWB0, 50.0AB50, max UDMA/133
ata14.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata14.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 1:0:3:0: Direct-Access ATA WDC WD20EARS-00M AB50 PQ: 0 ANSI: 5
sas: DONE DISCOVERY on port 3, pid:564, result:0
sd 1:0:0:0: Attached scsi generic sg4 type 0
sd 1:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 1:0:0:0: [sde] 4096-byte physical blocks
sd 1:0:0:0: [sde] Write Protect is off
sd 1:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:1:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 1:0:1:0: Attached scsi generic sg5 type 0
sd 1:0:1:0: [sdf] 4096-byte physical blocks
sd 1:0:1:0: [sdf] Write Protect is off
sd 1:0:1:0: [sdf] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:2:0: [sdg] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 1:0:2:0: [sdg] 4096-byte physical blocks
sd 1:0:2:0: [sdg] Write Protect is off
sd 1:0:2:0: [sdg] Mode Sense: 00 3a 00 00
sd 1:0:2:0: Attached scsi generic sg6 type 0
sd 1:0:2:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:3:0: Attached scsi generic sg7 type 0
sd 1:0:3:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 1:0:3:0: [sdh] Write Protect is off
sd 1:0:3:0: [sdh] Mode Sense: 00 3a 00 00
sd 1:0:3:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA PLEXTOR PX-256M5 1.03 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdi] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 3:0:0:0: Attached scsi generic sg8 type 0
sd 3:0:0:0: [sdi] Write Protect is off
sd 3:0:0:0: [sdi] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdi: sdi1 sdi2
sd 3:0:0:0: [sdi] Attached SCSI disk
sdg: sdg1 sdg2 sdg3
sd 1:0:2:0: [sdg] Attached SCSI disk
sde: sde1 sde2 sde3
sd 1:0:0:0: [sde] Attached SCSI disk
sdf: sdf1 sdf9
sd 1:0:1:0: [sdf] Attached SCSI disk
sdh: sdh1 sdh2 sdh3
sd 1:0:3:0: [sdh] Attached SCSI disk
random: crng init done
raid6: sse2x1 gen() 8570 MB/s
raid6: sse2x1 xor() 6521 MB/s
raid6: sse2x2 gen() 10691 MB/s
raid6: sse2x2 xor() 7273 MB/s
raid6: sse2x4 gen() 12930 MB/s
raid6: sse2x4 xor() 8761 MB/s
raid6: using algorithm sse2x4 gen() 12930 MB/s
raid6: .... xor() 8761 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device label bf devid 2 transid 1010973 /dev/sde2
BTRFS: device label bf devid 1 transid 1010973 /dev/sda2
BTRFS info (device sda2): disk space caching is enabled
BTRFS info (device sda2): has skinny extents
BTRFS info (device sda2): bdev /dev/sde2 errs: wr 1, rd 0, flush 0, corrupt 0, gen 0
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started ntp-systemd-netif.path.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target System Time Synchronized.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Libvirt guests shutdown.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Audit Socket.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
BTRFS info (device sda2): enabling auto defrag
BTRFS info (device sda2): use lzo compression, level 0
BTRFS info (device sda2): disk space caching is enabled
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd-journald[869]: Received request to flush runtime journal from PID 1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
ipmi message handler version 39.2
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
ioatdma: Intel(R) QuickData Technology Driver 4.00
igb 0000:04:00.0: DCA enabled
igb 0000:04:00.1: DCA enabled
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ipmi device interface
IPMI System Interface driver.
ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_platform: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
(NULL device *): SPMI-specified kcs state machine: duplicate
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
ipmi_si IPI0001:00: Found new BMC (man_id: 0x002a7c, prod_id: 0x0628, dev_id: 0x20)
ipmi_si IPI0001:00: IPMI kcs interface initialized
IPMI SSIF Interface driver
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
kvm: unknown parameter 'nested' ignored
usbcore: registered new interface driver snd-usb-audio
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0e60
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0e68
EDAC sbridge: Seeking for: PCI ID 8086:0e79
EDAC sbridge: Seeking for: PCI ID 8086:0e6a
EDAC sbridge: Seeking for: PCI ID 8086:0e6b
EDAC sbridge: Seeking for: PCI ID 8086:0e6c
EDAC sbridge: Seeking for: PCI ID 8086:0e6d
EDAC sbridge: Seeking for: PCI ID 8086:0eb8
EDAC sbridge: Seeking for: PCI ID 8086:0ebc
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:7f:0e.0 (INTERRUPT)
EDAC MC1: Giving out device to module sb_edac controller Ivy Bridge SrcID#1_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT)
EDAC sbridge: Ver: 1.1.2
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
spl: loading out-of-tree module taints kernel.
SPL: Loaded module v0.7.5-1ubuntu1
znvpair: module license 'CDDL' taints kernel.
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
znvpair: module license 'CDDL' taints kernel.
ZFS: Loaded module v0.7.5-1ubuntu15, ZFS pool version 5000, ZFS filesystem version 5
alua: device handler registered
emc: device handler registered
rdac: device handler registered
zd0: p1
zd16: p1
zd32: p1
zd48: p1 p2 < p5 >
zd64: p1 p2
zd80: p1 p2
zd96: p1 p2
zd112: p1
zd128: p1 p2
zd144: p1 p2
zd160: p1 p2
zd176: p1 p2
zd192: p1 p2 < p5 >
zd208: p1
zd224: p1
zd240: p1
zd256: p1
zd272: p1
zd288: p1
zd304: p1
zd320: p1 p2
zd336: p1 p2 < p5 >
zd352: p1
zd368: p1 p2
zd512: p1 p2
Adding 33554428k swap on /dev/zd528. Priority:-2 extents:1 across:33554428k SSFS
audit: type=1400 audit(1529129531.104:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=21583 comm="apparmor_parser"
audit: type=1400 audit(1529129531.120:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=21586 comm="apparmor_parser"
audit: type=1400 audit(1529129531.120:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=21586 comm="apparmor_parser"
audit: type=1400 audit(1529129531.208:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=21589 comm="apparmor_parser"
audit: type=1400 audit(1529129531.208:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=21585 comm="apparmor_parser"
audit: type=1400 audit(1529129531.208:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=21588 comm="apparmor_parser"
audit: type=1400 audit(1529129531.208:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=21588 comm="apparmor_parser"
audit: type=1400 audit(1529129531.208:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=21588 comm="apparmor_parser"
audit: type=1400 audit(1529129531.212:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=21584 comm="apparmor_parser"
audit: type=1400 audit(1529129531.212:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=21584 comm="apparmor_parser"
Process accounting resumed
new mount options do not match the existing superblock, will be ignored
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
IPv6: ADDRCONF(NETDEV_UP): lxcbr0: link is not ready
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
IPv6: ADDRCONF(NETDEV_UP): enp4s0f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): tapvb: link is not ready
br0: port 1(enp4s0f0) entered blocking state
br0: port 1(enp4s0f0) entered disabled state
device enp4s0f0 entered promiscuous mode
br0: port 2(tapvb) entered blocking state
br0: port 2(tapvb) entered disabled state
device tapvb entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
igb 0000:04:00.0 enp4s0f0: igb: enp4s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
br0: port 1(enp4s0f0) entered blocking state
br0: port 1(enp4s0f0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
8021q: 802.1Q VLAN Support v1.8
8021q: adding VLAN 0 to HW filter on device enp4s0f0
brv4: port 1(enp4s0f0.4) entered blocking state
brv4: port 1(enp4s0f0.4) entered disabled state
device enp4s0f0.4 entered promiscuous mode
brv4: port 1(enp4s0f0.4) entered blocking state
brv4: port 1(enp4s0f0.4) entered forwarding state
brv66: port 1(enp4s0f0.66) entered blocking state
brv66: port 1(enp4s0f0.66) entered disabled state
device enp4s0f0.66 entered promiscuous mode
brv66: port 1(enp4s0f0.66) entered blocking state
brv66: port 1(enp4s0f0.66) entered forwarding state
brj: port 1(enp4s0f0.100) entered blocking state
brj: port 1(enp4s0f0.100) entered disabled state
device enp4s0f0.100 entered promiscuous mode
brj: port 1(enp4s0f0.100) entered blocking state
brj: port 1(enp4s0f0.100) entered forwarding state
brk: port 1(enp4s0f0.101) entered blocking state
brk: port 1(enp4s0f0.101) entered disabled state
device enp4s0f0.101 entered promiscuous mode
brk: port 1(enp4s0f0.101) entered blocking state
brk: port 1(enp4s0f0.101) entered forwarding state
bru: port 1(enp4s0f0.102) entered blocking state
bru: port 1(enp4s0f0.102) entered disabled state
device enp4s0f0.102 entered promiscuous mode
bru: port 1(enp4s0f0.102) entered blocking state
bru: port 1(enp4s0f0.102) entered forwarding state
brjs: port 1(enp4s0f0.103) entered blocking state
brjs: port 1(enp4s0f0.103) entered disabled state
device enp4s0f0.103 entered promiscuous mode
brjs: port 1(enp4s0f0.103) entered blocking state
brjs: port 1(enp4s0f0.103) entered forwarding state
brks: port 1(enp4s0f0.104) entered blocking state
brks: port 1(enp4s0f0.104) entered disabled state
device enp4s0f0.104 entered promiscuous mode
brks: port 1(enp4s0f0.104) entered blocking state
brks: port 1(enp4s0f0.104) entered forwarding state
brus: port 1(enp4s0f0.105) entered blocking state
brus: port 1(enp4s0f0.105) entered disabled state
device enp4s0f0.105 entered promiscuous mode
brus: port 1(enp4s0f0.105) entered blocking state
brus: port 1(enp4s0f0.105) entered forwarding state
kauditd_printk_skb: 19 callbacks suppressed
audit: type=1400 audit(1529129625.073:31): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/bin/lxc-start" pid=25867 comm="apparmor_parser"
audit: type=1400 audit(1529129625.085:32): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default" pid=25871 comm="apparmor_parser"
audit: type=1400 audit(1529129625.085:33): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-cgns" pid=25871 comm="apparmor_parser"
audit: type=1400 audit(1529129625.085:34): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-mounting" pid=25871 comm="apparmor_parser"
audit: type=1400 audit(1529129625.085:35): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-nesting" pid=25871 comm="apparmor_parser"
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net f00000a9)
br0: port 3(dns.f) entered blocking state
br0: port 3(dns.f) entered disabled state
device dns.f entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.f: link is not ready
eth0: renamed from veth48GMVA
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.f: link becomes ready
br0: port 3(dns.f) entered blocking state
br0: port 3(dns.f) entered forwarding state
br0: port 4(dns.g) entered blocking state
br0: port 4(dns.g) entered disabled state
device dns.g entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.g: link is not ready
eth0: renamed from veth0E65AS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.g: link becomes ready
br0: port 4(dns.g) entered blocking state
br0: port 4(dns.g) entered forwarding state
br0: port 5(dns.h) entered blocking state
br0: port 5(dns.h) entered disabled state
device dns.h entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.h: link is not ready
eth0: renamed from vethM2LRH5
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.h: link becomes ready
br0: port 5(dns.h) entered blocking state
br0: port 5(dns.h) entered forwarding state
br0: port 6(dns.o) entered blocking state
br0: port 6(dns.o) entered disabled state
device dns.o entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.o: link is not ready
eth0: renamed from vethUHH4LF
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.o: link becomes ready
br0: port 6(dns.o) entered blocking state
br0: port 6(dns.o) entered forwarding state
br0: port 7(dns.psi.a1) entered blocking state
br0: port 7(dns.psi.a1) entered disabled state
device dns.psi.a1 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.psi.a1: link is not ready
eth0: renamed from vethVL4FFM
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.psi.a1: link becomes ready
br0: port 7(dns.psi.a1) entered blocking state
br0: port 7(dns.psi.a1) entered forwarding state
br0: port 8(dns.psi.all) entered blocking state
br0: port 8(dns.psi.all) entered disabled state
device dns.psi.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.psi.all: link is not ready
eth0: renamed from veth1ADX8L
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.psi.all: link becomes ready
br0: port 8(dns.psi.all) entered blocking state
br0: port 8(dns.psi.all) entered forwarding state
OpenWrt: port 1(OpenWrt-nic) entered blocking state
OpenWrt: port 1(OpenWrt-nic) entered disabled state
device OpenWrt-nic entered promiscuous mode
OpenWrt: port 1(OpenWrt-nic) entered blocking state
OpenWrt: port 1(OpenWrt-nic) entered listening state
OpenWrt: port 1(OpenWrt-nic) entered disabled state
wnx13: port 1(wnx13-nic) entered blocking state
wnx13: port 1(wnx13-nic) entered disabled state
device wnx13-nic entered promiscuous mode
wnx13: port 1(wnx13-nic) entered blocking state
wnx13: port 1(wnx13-nic) entered listening state
wnx13: port 1(wnx13-nic) entered disabled state
virbr2: port 1(virbr2-nic) entered blocking state
virbr2: port 1(virbr2-nic) entered disabled state
device virbr2-nic entered promiscuous mode
virbr2: port 1(virbr2-nic) entered blocking state
virbr2: port 1(virbr2-nic) entered listening state
virbr2: port 1(virbr2-nic) entered disabled state
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
virbr1: port 1(virbr1-nic) entered blocking state
virbr1: port 1(virbr1-nic) entered disabled state
device virbr1-nic entered promiscuous mode
virbr1: port 1(virbr1-nic) entered blocking state
virbr1: port 1(virbr1-nic) entered listening state
virbr1: port 1(virbr1-nic) entered disabled state
brobgw: port 1(brobgw-nic) entered blocking state
brobgw: port 1(brobgw-nic) entered disabled state
device brobgw-nic entered promiscuous mode
brobgw: port 1(brobgw-nic) entered blocking state
brobgw: port 1(brobgw-nic) entered listening state
brobgw: port 1(brobgw-nic) entered disabled state
br0: port 9(dns.t) entered blocking state
br0: port 9(dns.t) entered disabled state
device dns.t entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.t: link is not ready
br0: port 9(dns.t) entered blocking state
br0: port 9(dns.t) entered forwarding state
br0: port 9(dns.t) entered disabled state
br0: port 10(vnet0) entered blocking state
br0: port 10(vnet0) entered disabled state
device vnet0 entered promiscuous mode
br0: port 10(vnet0) entered blocking state
br0: port 10(vnet0) entered forwarding state
eth0: renamed from vethDI0Y8B
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.t: link becomes ready
br0: port 9(dns.t) entered blocking state
br0: port 9(dns.t) entered forwarding state
br0: port 11(dns.wj.all) entered blocking state
br0: port 11(dns.wj.all) entered disabled state
device dns.wj.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.wj.all: link is not ready
eth0: renamed from vethJQU52V
br0: port 12(vnet1) entered blocking state
br0: port 12(vnet1) entered disabled state
device vnet1 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
br0: port 12(vnet1) entered blocking state
br0: port 12(vnet1) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.wj.all: link becomes ready
br0: port 11(dns.wj.all) entered blocking state
br0: port 11(dns.wj.all) entered forwarding state
vfio-pci 0000:82:00.0: enabling device (0000 -> 0003)
vfio_ecap_init: 0000:82:00.0 hiding ecap 0x19@0x270
br0: port 13(dt) entered blocking state
br0: port 13(dt) entered disabled state
device dt entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dt: link is not ready
eth0: renamed from vethOP2J7U
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dt: link becomes ready
br0: port 13(dt) entered blocking state
br0: port 13(dt) entered forwarding state
usb 2-1.3.1: reset low-speed USB device number 5 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 6 using ehci-pci
audit: type=1400 audit(1529129697.152:36): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=34069 comm="mount" flags="rw, remount"
audit: type=1400 audit(1529129697.152:37): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/dev/shm/" pid=34070 comm="mount" flags="rw, nosuid, nodev, remount"
usb 2-1.3.1: reset low-speed USB device number 5 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 6 using ehci-pci
br0: port 14(g.stretch) entered blocking state
br0: port 14(g.stretch) entered disabled state
device g.stretch entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): g.stretch: link is not ready
eth0: renamed from veth3VGWNQ
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): g.stretch: link becomes ready
br0: port 14(g.stretch) entered blocking state
br0: port 14(g.stretch) entered forwarding state
br0: port 15(meek.gae) entered blocking state
br0: port 15(meek.gae) entered disabled state
device meek.gae entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): meek.gae: link is not ready
eth0: renamed from vethFNC7CB
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): meek.gae: link becomes ready
br0: port 15(meek.gae) entered blocking state
br0: port 15(meek.gae) entered forwarding state
br0: port 16(gitlab) entered blocking state
br0: port 16(gitlab) entered disabled state
device gitlab entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gitlab: link is not ready
eth0: renamed from vethG8DJN6
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gitlab: link becomes ready
br0: port 16(gitlab) entered blocking state
br0: port 16(gitlab) entered forwarding state
usb 2-1.3.1: reset low-speed USB device number 5 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 6 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 5 using ehci-pci
br0: port 17(gw.cow) entered blocking state
br0: port 17(gw.cow) entered disabled state
device gw.cow entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gw.cow: link is not ready
usb 2-1.3.2: reset low-speed USB device number 6 using ehci-pci
eth0: renamed from vethW4388K
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gw.cow: link becomes ready
br0: port 17(gw.cow) entered blocking state
br0: port 17(gw.cow) entered forwarding state
br0: port 18(gw.f) entered blocking state
br0: port 18(gw.f) entered disabled state
device gw.f entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gw.f: link is not ready
eth0: renamed from vethY9AV5O
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gw.f: link becomes ready
br0: port 18(gw.f) entered blocking state
br0: port 18(gw.f) entered forwarding state
br0: port 19(gw.o) entered blocking state
br0: port 19(gw.o) entered disabled state
device gw.o entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gw.o: link is not ready
eth0: renamed from veth5R87UK
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gw.o: link becomes ready
br0: port 19(gw.o) entered blocking state
br0: port 19(gw.o) entered forwarding state
br0: port 20(gw.sni) entered blocking state
br0: port 20(gw.sni) entered disabled state
device gw.sni entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gw.sni: link is not ready
eth0: renamed from vethKEX0OQ
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gw.sni: link becomes ready
br0: port 20(gw.sni) entered blocking state
br0: port 20(gw.sni) entered forwarding state
br0: port 21(http) entered blocking state
br0: port 21(http) entered disabled state
device http entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): http: link is not ready
usb 2-1.3.1: reset low-speed USB device number 5 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 6 using ehci-pci
eth0: renamed from veth4TJUFI
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): http: link becomes ready
br0: port 21(http) entered blocking state
br0: port 21(http) entered forwarding state
usb 2-1.3.1: reset low-speed USB device number 5 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 6 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 5 using ehci-pci
br0: port 22(https) entered blocking state
br0: port 22(https) entered disabled state
device https entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): https: link is not ready
usb 2-1.3.2: reset low-speed USB device number 6 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 5 using ehci-pci
eth0: renamed from vethVMSQMB
usb 2-1.3.2: reset low-speed USB device number 6 using ehci-pci
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): https: link becomes ready
br0: port 22(https) entered blocking state
br0: port 22(https) entered forwarding state
usb 2-1.3.1: reset low-speed USB device number 5 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 6 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 5 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 5 using ehci-pci
br0: port 23(m.h) entered blocking state
br0: port 23(m.h) entered disabled state
device m.h entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): m.h: link is not ready
usb 2-1.3.2: reset low-speed USB device number 6 using ehci-pci
eth0: renamed from vethIPC91M
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): m.h: link becomes ready
br0: port 23(m.h) entered blocking state
br0: port 23(m.h) entered forwarding state
usb 2-1.3.1: reset low-speed USB device number 5 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 6 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 6 using ehci-pci
br0: port 24(mm) entered blocking state
br0: port 24(mm) entered disabled state
device mm entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): mm: link is not ready
eth0: renamed from vethGCUMWR
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): mm: link becomes ready
br0: port 24(mm) entered blocking state
br0: port 24(mm) entered forwarding state
br0: port 25(sni) entered blocking state
br0: port 25(sni) entered disabled state
device sni entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): sni: link is not ready
eth0: renamed from vethD7EWUI
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): sni: link becomes ready
br0: port 25(sni) entered blocking state
br0: port 25(sni) entered forwarding state
Initializing XFRM netlink socket
br0: port 26(squid) entered blocking state
br0: port 26(squid) entered disabled state
device squid entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): squid: link is not ready
br0: port 26(squid) entered blocking state
br0: port 26(squid) entered forwarding state
eth0: renamed from vethI5DSGG
IPv6: ADDRCONF(NETDEV_CHANGE): squid: link becomes ready
docker0: port 1(vethe39b79a) entered blocking state
docker0: port 1(vethe39b79a) entered disabled state
device vethe39b79a entered promiscuous mode
br0: port 27(vm) entered blocking state
br0: port 27(vm) entered disabled state
device vm entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vm: link is not ready
eth0: renamed from veth1FHQR5
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vm: link becomes ready
br0: port 27(vm) entered blocking state
br0: port 27(vm) entered forwarding state
eth0: renamed from vethdb3d553
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 1(vethe39b79a) entered blocking state
docker0: port 1(vethe39b79a) entered forwarding state
br0: port 28(wiki) entered blocking state
br0: port 28(wiki) entered disabled state
device wiki entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): wiki: link is not ready
eth0: renamed from veth1KQHY3
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): wiki: link becomes ready
br0: port 28(wiki) entered blocking state
br0: port 28(wiki) entered forwarding state
br0: port 29(psi.k1) entered blocking state
br0: port 29(psi.k1) entered disabled state
device psi.k1 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): psi.k1: link is not ready
eth0: renamed from vethSMNFVD
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): psi.k1: link becomes ready
br0: port 29(psi.k1) entered blocking state
br0: port 29(psi.k1) entered forwarding state
br0: port 30(psi.kr) entered blocking state
br0: port 30(psi.kr) entered disabled state
device psi.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): psi.kr: link is not ready
eth0: renamed from vethQ88DWQ
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): psi.kr: link becomes ready
br0: port 30(psi.kr) entered blocking state
br0: port 30(psi.kr) entered forwarding state
br0: port 31(psi.meek) entered blocking state
br0: port 31(psi.meek) entered disabled state
device psi.meek entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): psi.meek: link is not ready
eth0: renamed from vethI09XQ5
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): psi.meek: link becomes ready
br0: port 31(psi.meek) entered blocking state
br0: port 31(psi.meek) entered forwarding state
br0: port 32(wj.jp) entered blocking state
br0: port 32(wj.jp) entered disabled state
device wj.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): wj.jp: link is not ready
eth0: renamed from vethLYMAAV
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): wj.jp: link becomes ready
br0: port 32(wj.jp) entered blocking state
br0: port 32(wj.jp) entered forwarding state
br0: port 33(gw.tor) entered blocking state
br0: port 33(gw.tor) entered disabled state
device gw.tor entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gw.tor: link is not ready
eth0: renamed from vethME74OC
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gw.tor: link becomes ready
br0: port 33(gw.tor) entered blocking state
br0: port 33(gw.tor) entered forwarding state
br0: port 34(gw.tor.cow) entered blocking state
br0: port 34(gw.tor.cow) entered disabled state
device gw.tor.cow entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gw.tor.cow: link is not ready
eth0: renamed from veth3NNG7L
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gw.tor.cow: link becomes ready
br0: port 34(gw.tor.cow) entered blocking state
br0: port 34(gw.tor.cow) entered forwarding state
br0: port 35(gfw.gp) entered blocking state
br0: port 35(gfw.gp) entered disabled state
device gfw.gp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gfw.gp: link is not ready
eth0: renamed from vethJR83IQ
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gfw.gp: link becomes ready
br0: port 35(gfw.gp) entered blocking state
br0: port 35(gfw.gp) entered forwarding state
br0: port 36(meek.amz) entered blocking state
br0: port 36(meek.amz) entered disabled state
device meek.amz entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): meek.amz: link is not ready
eth0: renamed from vethBAD3ID
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): meek.amz: link becomes ready
br0: port 36(meek.amz) entered blocking state
br0: port 36(meek.amz) entered forwarding state
br0: port 37(meek.azr) entered blocking state
br0: port 37(meek.azr) entered disabled state
device meek.azr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): meek.azr: link is not ready
eth0: renamed from veth658O7F
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): meek.azr: link becomes ready
br0: port 37(meek.azr) entered blocking state
br0: port 37(meek.azr) entered forwarding state
br0: port 38(meek.jp) entered blocking state
br0: port 38(meek.jp) entered disabled state
device meek.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): meek.jp: link is not ready
eth0: renamed from vethE0ETW6
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): meek.jp: link becomes ready
br0: port 38(meek.jp) entered blocking state
br0: port 38(meek.jp) entered forwarding state
br0: port 39(s4.jp) entered blocking state
br0: port 39(s4.jp) entered disabled state
device s4.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): s4.jp: link is not ready
eth0: renamed from vethXE3TPO
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): s4.jp: link becomes ready
br0: port 39(s4.jp) entered blocking state
br0: port 39(s4.jp) entered forwarding state
br0: port 40(s5.all) entered blocking state
br0: port 40(s5.all) entered disabled state
device s5.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): s5.all: link is not ready
eth0: renamed from vethX1UAOV
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): s5.all: link becomes ready
br0: port 40(s5.all) entered blocking state
br0: port 40(s5.all) entered forwarding state
br0: port 41(gfw.tor.all) entered blocking state
br0: port 41(gfw.tor.all) entered disabled state
device gfw.tor.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gfw.tor.all: link is not ready
eth0: renamed from veth34J337
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gfw.tor.all: link becomes ready
br0: port 41(gfw.tor.all) entered blocking state
br0: port 41(gfw.tor.all) entered forwarding state
br0: port 42(gfw.tor.jp) entered blocking state
br0: port 42(gfw.tor.jp) entered disabled state
device gfw.tor.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gfw.tor.jp: link is not ready
eth0: renamed from vethXJS3DX
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gfw.tor.jp: link becomes ready
br0: port 42(gfw.tor.jp) entered blocking state
br0: port 42(gfw.tor.jp) entered forwarding state
br0: port 43(gfw.tor.kr) entered blocking state
br0: port 43(gfw.tor.kr) entered disabled state
device gfw.tor.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gfw.tor.kr: link is not ready
eth0: renamed from vethO0C6TH
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gfw.tor.kr: link becomes ready
br0: port 43(gfw.tor.kr) entered blocking state
br0: port 43(gfw.tor.kr) entered forwarding state
br0: port 44(gfw.tor.us) entered blocking state
br0: port 44(gfw.tor.us) entered disabled state
device gfw.tor.us entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gfw.tor.us: link is not ready
eth0: renamed from vethCWFNVQ
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gfw.tor.us: link becomes ready
br0: port 44(gfw.tor.us) entered blocking state
br0: port 44(gfw.tor.us) entered forwarding state
br0: port 45(gw.tor.prx) entered blocking state
br0: port 45(gw.tor.prx) entered disabled state
device gw.tor.prx entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gw.tor.prx: link is not ready
eth0: renamed from veth63U373
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gw.tor.prx: link becomes ready
br0: port 45(gw.tor.prx) entered blocking state
br0: port 45(gw.tor.prx) entered forwarding state
audit: type=1400 audit(1529129788.129:38): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=14789 comm="mount" flags="rw, remount"
audit: type=1400 audit(1529129788.129:39): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/dev/shm/" pid=14790 comm="mount" flags="rw, nosuid, nodev, remount"
br0: port 46(ovpn.all) entered blocking state
br0: port 46(ovpn.all) entered disabled state
device ovpn.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.all: link is not ready
eth0: renamed from vethUEM6US
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.all: link becomes ready
br0: port 46(ovpn.all) entered blocking state
br0: port 46(ovpn.all) entered forwarding state
br0: port 47(ovpn.allu) entered blocking state
br0: port 47(ovpn.allu) entered disabled state
device ovpn.allu entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.allu: link is not ready
audit: type=1400 audit(1529129791.401:40): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=18233 comm="(tor)" flags="rw, rslave"
eth0: renamed from vethO99NO7
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.allu: link becomes ready
br0: port 47(ovpn.allu) entered blocking state
br0: port 47(ovpn.allu) entered forwarding state
audit: type=1400 audit(1529129796.625:41): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=27639 comm="(tor)" flags="rw, rslave"
br0: port 48(ovpn.jp) entered blocking state
br0: port 48(ovpn.jp) entered disabled state
device ovpn.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.jp: link is not ready
eth0: renamed from vethDNJOP1
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.jp: link becomes ready
br0: port 48(ovpn.jp) entered blocking state
br0: port 48(ovpn.jp) entered forwarding state
br0: port 49(ovpn.jpu) entered blocking state
br0: port 49(ovpn.jpu) entered disabled state
device ovpn.jpu entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.jpu: link is not ready
eth0: renamed from veth06YN7V
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.jpu: link becomes ready
br0: port 49(ovpn.jpu) entered blocking state
br0: port 49(ovpn.jpu) entered forwarding state
br0: port 50(ovpn.kr) entered blocking state
br0: port 50(ovpn.kr) entered disabled state
device ovpn.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.kr: link is not ready
eth0: renamed from veth9WEX0N
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.kr: link becomes ready
br0: port 50(ovpn.kr) entered blocking state
br0: port 50(ovpn.kr) entered forwarding state
br0: port 51(ovpn.kru) entered blocking state
br0: port 51(ovpn.kru) entered disabled state
device ovpn.kru entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.kru: link is not ready
eth0: renamed from vethJXD0PA
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.kru: link becomes ready
br0: port 51(ovpn.kru) entered blocking state
br0: port 51(ovpn.kru) entered forwarding state
br0: port 52(ovpn.us) entered blocking state
br0: port 52(ovpn.us) entered disabled state
device ovpn.us entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.us: link is not ready
eth0: renamed from veth2RD2NQ
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.us: link becomes ready
br0: port 52(ovpn.us) entered blocking state
br0: port 52(ovpn.us) entered forwarding state
br0: port 53(ovpn.usu) entered blocking state
br0: port 53(ovpn.usu) entered disabled state
device ovpn.usu entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.usu: link is not ready
eth0: renamed from vethW47121
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.usu: link becomes ready
br0: port 53(ovpn.usu) entered blocking state
br0: port 53(ovpn.usu) entered forwarding state
br0: port 54(vpg.all) entered blocking state
br0: port 54(vpg.all) entered disabled state
device vpg.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.all: link is not ready
eth0: renamed from vethNAEVJU
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.all: link becomes ready
br0: port 54(vpg.all) entered blocking state
br0: port 54(vpg.all) entered forwarding state
br0: port 55(vpg.allu) entered blocking state
br0: port 55(vpg.allu) entered disabled state
device vpg.allu entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.allu: link is not ready
eth0: renamed from vethYQ8ALN
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.allu: link becomes ready
br0: port 55(vpg.allu) entered blocking state
br0: port 55(vpg.allu) entered forwarding state
br0: port 56(vpg.jp) entered blocking state
br0: port 56(vpg.jp) entered disabled state
device vpg.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.jp: link is not ready
brj: port 2(vpg.jp.brj) entered blocking state
brj: port 2(vpg.jp.brj) entered disabled state
device vpg.jp.brj entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.jp.brj: link is not ready
brj: port 2(vpg.jp.brj) entered blocking state
brj: port 2(vpg.jp.brj) entered forwarding state
eth0: renamed from vethK70ILH
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
brj: port 2(vpg.jp.brj) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.jp: link becomes ready
br0: port 56(vpg.jp) entered blocking state
br0: port 56(vpg.jp) entered forwarding state
eth1: renamed from vethAXPT4U
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.jp.brj: link becomes ready
brj: port 2(vpg.jp.brj) entered blocking state
brj: port 2(vpg.jp.brj) entered forwarding state
br0: port 57(vpg.jps) entered blocking state
br0: port 57(vpg.jps) entered disabled state
device vpg.jps entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.jps: link is not ready
brjs: port 2(vpg.brjs) entered blocking state
brjs: port 2(vpg.brjs) entered disabled state
device vpg.brjs entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.brjs: link is not ready
brjs: port 2(vpg.brjs) entered blocking state
brjs: port 2(vpg.brjs) entered forwarding state
eth0: renamed from veth080YAM
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
brjs: port 2(vpg.brjs) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.jps: link becomes ready
br0: port 57(vpg.jps) entered blocking state
br0: port 57(vpg.jps) entered forwarding state
eth1: renamed from vethNEKKW7
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.brjs: link becomes ready
brjs: port 2(vpg.brjs) entered blocking state
brjs: port 2(vpg.brjs) entered forwarding state
br0: port 58(vpg.jpu) entered blocking state
br0: port 58(vpg.jpu) entered disabled state
device vpg.jpu entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.jpu: link is not ready
brj: port 3(vpg.jpu.brj) entered blocking state
brj: port 3(vpg.jpu.brj) entered disabled state
device vpg.jpu.brj entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.jpu.brj: link is not ready
brj: port 3(vpg.jpu.brj) entered blocking state
brj: port 3(vpg.jpu.brj) entered forwarding state
eth0: renamed from vethCWQ00D
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
brj: port 3(vpg.jpu.brj) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.jpu: link becomes ready
br0: port 58(vpg.jpu) entered blocking state
br0: port 58(vpg.jpu) entered forwarding state
eth1: renamed from veth4Q5PX7
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.jpu.brj: link becomes ready
brj: port 3(vpg.jpu.brj) entered blocking state
brj: port 3(vpg.jpu.brj) entered forwarding state
br0: port 59(vpg.kr) entered blocking state
br0: port 59(vpg.kr) entered disabled state
device vpg.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.kr: link is not ready
brk: port 2(vpg.kr.brk) entered blocking state
brk: port 2(vpg.kr.brk) entered disabled state
device vpg.kr.brk entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.kr.brk: link is not ready
brk: port 2(vpg.kr.brk) entered blocking state
brk: port 2(vpg.kr.brk) entered forwarding state
eth0: renamed from vethSRBMB9
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
brk: port 2(vpg.kr.brk) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.kr: link becomes ready
br0: port 59(vpg.kr) entered blocking state
br0: port 59(vpg.kr) entered forwarding state
eth1: renamed from vethR57NHD
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.kr.brk: link becomes ready
brk: port 2(vpg.kr.brk) entered blocking state
brk: port 2(vpg.kr.brk) entered forwarding state
br0: port 60(vpg.krs) entered blocking state
br0: port 60(vpg.krs) entered disabled state
device vpg.krs entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.krs: link is not ready
brks: port 2(vpg.brks) entered blocking state
brks: port 2(vpg.brks) entered disabled state
device vpg.brks entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.brks: link is not ready
brks: port 2(vpg.brks) entered blocking state
brks: port 2(vpg.brks) entered forwarding state
eth0: renamed from vethQGMWL3
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
brks: port 2(vpg.brks) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.krs: link becomes ready
br0: port 60(vpg.krs) entered blocking state
br0: port 60(vpg.krs) entered forwarding state
eth1: renamed from vethRUGQ1P
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.brks: link becomes ready
brks: port 2(vpg.brks) entered blocking state
brks: port 2(vpg.brks) entered forwarding state
br0: port 61(vpg.kru) entered blocking state
br0: port 61(vpg.kru) entered disabled state
device vpg.kru entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.kru: link is not ready
brk: port 3(vpg.kru.brk) entered blocking state
brk: port 3(vpg.kru.brk) entered disabled state
device vpg.kru.brk entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.kru.brk: link is not ready
brk: port 3(vpg.kru.brk) entered blocking state
brk: port 3(vpg.kru.brk) entered forwarding state
eth0: renamed from vethH5SJTO
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
brk: port 3(vpg.kru.brk) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.kru: link becomes ready
br0: port 61(vpg.kru) entered blocking state
br0: port 61(vpg.kru) entered forwarding state
eth1: renamed from veth2327EE
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.kru.brk: link becomes ready
brk: port 3(vpg.kru.brk) entered blocking state
brk: port 3(vpg.kru.brk) entered forwarding state
br0: port 62(vpg.prx.all) entered blocking state
br0: port 62(vpg.prx.all) entered disabled state
device vpg.prx.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.prx.all: link is not ready
eth0: renamed from vethQNLG9I
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.prx.all: link becomes ready
br0: port 62(vpg.prx.all) entered blocking state
br0: port 62(vpg.prx.all) entered forwarding state
br0: port 63(vpg.prx.jp) entered blocking state
br0: port 63(vpg.prx.jp) entered disabled state
device vpg.prx.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.prx.jp: link is not ready
eth0: renamed from vethORPSWN
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.prx.jp: link becomes ready
br0: port 63(vpg.prx.jp) entered blocking state
br0: port 63(vpg.prx.jp) entered forwarding state
audit: type=1400 audit(1529129842.361:42): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=23883 comm="mount" flags="rw, remount"
audit: type=1400 audit(1529129842.361:43): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/dev/shm/" pid=23884 comm="mount" flags="rw, nosuid, nodev, remount"
br0: port 64(vpg.prx.kr) entered blocking state
br0: port 64(vpg.prx.kr) entered disabled state
device vpg.prx.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.prx.kr: link is not ready
eth0: renamed from vethO93PG2
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.prx.kr: link becomes ready
br0: port 64(vpg.prx.kr) entered blocking state
br0: port 64(vpg.prx.kr) entered forwarding state
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
br0: port 65(vpg.prx.us) entered blocking state
br0: port 65(vpg.prx.us) entered disabled state
device vpg.prx.us entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.prx.us: link is not ready
eth0: renamed from vethMXLAAV
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.prx.us: link becomes ready
br0: port 65(vpg.prx.us) entered blocking state
br0: port 65(vpg.prx.us) entered forwarding state
br0: port 66(vpg.us) entered blocking state
br0: port 66(vpg.us) entered disabled state
device vpg.us entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.us: link is not ready
bru: port 2(vpg.us.bru) entered blocking state
bru: port 2(vpg.us.bru) entered disabled state
device vpg.us.bru entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.us.bru: link is not ready
bru: port 2(vpg.us.bru) entered blocking state
bru: port 2(vpg.us.bru) entered forwarding state
eth0: renamed from veth0UA5EE
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
bru: port 2(vpg.us.bru) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.us: link becomes ready
br0: port 66(vpg.us) entered blocking state
br0: port 66(vpg.us) entered forwarding state
eth1: renamed from vethHGRCJD
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.us.bru: link becomes ready
bru: port 2(vpg.us.bru) entered blocking state
bru: port 2(vpg.us.bru) entered forwarding state
br0: port 67(vpg.uss) entered blocking state
br0: port 67(vpg.uss) entered disabled state
device vpg.uss entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.uss: link is not ready
brus: port 2(vpg.brus) entered blocking state
brus: port 2(vpg.brus) entered disabled state
device vpg.brus entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.brus: link is not ready
brus: port 2(vpg.brus) entered blocking state
brus: port 2(vpg.brus) entered forwarding state
eth0: renamed from vethS19X34
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
brus: port 2(vpg.brus) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.uss: link becomes ready
br0: port 67(vpg.uss) entered blocking state
br0: port 67(vpg.uss) entered forwarding state
eth1: renamed from vethQUL9O0
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.brus: link becomes ready
brus: port 2(vpg.brus) entered blocking state
brus: port 2(vpg.brus) entered forwarding state
br0: port 68(vpg.usu) entered blocking state
br0: port 68(vpg.usu) entered disabled state
device vpg.usu entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.usu: link is not ready
bru: port 3(vpg.usu.bru) entered blocking state
bru: port 3(vpg.usu.bru) entered disabled state
device vpg.usu.bru entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.usu.bru: link is not ready
bru: port 3(vpg.usu.bru) entered blocking state
bru: port 3(vpg.usu.bru) entered forwarding state
eth0: renamed from vethEKE6MU
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
bru: port 3(vpg.usu.bru) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.usu: link becomes ready
br0: port 68(vpg.usu) entered blocking state
br0: port 68(vpg.usu) entered forwarding state
eth1: renamed from vethTB05MD
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.usu.bru: link becomes ready
bru: port 3(vpg.usu.bru) entered blocking state
bru: port 3(vpg.usu.bru) entered forwarding state
br0: port 69(vpn.h) entered blocking state
br0: port 69(vpn.h) entered disabled state
device vpn.h entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpn.h: link is not ready
eth0: renamed from veth8TE87M
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpn.h: link becomes ready
br0: port 69(vpn.h) entered blocking state
br0: port 69(vpn.h) entered forwarding state
br0: port 70(vpn.all) entered blocking state
br0: port 70(vpn.all) entered disabled state
device vpn.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpn.all: link is not ready
eth0: renamed from veth6FJGUI
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpn.all: link becomes ready
br0: port 70(vpn.all) entered blocking state
br0: port 70(vpn.all) entered forwarding state
br0: port 71(vpn.jp) entered blocking state
br0: port 71(vpn.jp) entered disabled state
device vpn.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpn.jp: link is not ready
eth0: renamed from vethA69O03
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpn.jp: link becomes ready
br0: port 71(vpn.jp) entered blocking state
br0: port 71(vpn.jp) entered forwarding state
br0: port 72(vpn.kr) entered blocking state
br0: port 72(vpn.kr) entered disabled state
device vpn.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpn.kr: link is not ready
eth0: renamed from vethLCC78X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpn.kr: link becomes ready
br0: port 72(vpn.kr) entered blocking state
br0: port 72(vpn.kr) entered forwarding state
br0: port 73(vpn.us) entered blocking state
br0: port 73(vpn.us) entered disabled state
device vpn.us entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpn.us: link is not ready
eth0: renamed from vethYPSK8J
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpn.us: link becomes ready
br0: port 73(vpn.us) entered blocking state
br0: port 73(vpn.us) entered forwarding state
br0: port 74(wkf) entered blocking state
br0: port 74(wkf) entered disabled state
device wkf entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): wkf: link is not ready
eth0: renamed from veth366UQ7
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): wkf: link becomes ready
br0: port 74(wkf) entered blocking state
br0: port 74(wkf) entered forwarding state
br0: port 75(wkp) entered blocking state
br0: port 75(wkp) entered disabled state
device wkp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): wkp: link is not ready
eth0: renamed from veth8T6JQ3
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): wkp: link becomes ready
br0: port 75(wkp) entered blocking state
br0: port 75(wkp) entered forwarding state
br0: port 76(docker.mirror) entered blocking state
br0: port 76(docker.mirror) entered disabled state
device docker.mirror entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): docker.mirror: link is not ready
eth0: renamed from veth8X47IG
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): docker.mirror: link becomes ready
br0: port 76(docker.mirror) entered blocking state
br0: port 76(docker.mirror) entered forwarding state
br0: port 77(docker.registry) entered blocking state
br0: port 77(docker.registry) entered disabled state
device docker.registry entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): docker.registry: link is not ready
eth0: renamed from veth7K2PCA
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): docker.registry: link becomes ready
br0: port 77(docker.registry) entered blocking state
br0: port 77(docker.registry) entered forwarding state
br0: port 78(mirror) entered blocking state
br0: port 78(mirror) entered disabled state
device mirror entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): mirror: link is not ready
eth0: renamed from veth7QU4KP
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): mirror: link becomes ready
br0: port 78(mirror) entered blocking state
br0: port 78(mirror) entered forwarding state
br0: port 79(mldk) entered blocking state
br0: port 79(mldk) entered disabled state
device mldk entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): mldk: link is not ready
eth0: renamed from veth4Q0XBG
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): mldk: link becomes ready
br0: port 79(mldk) entered blocking state
br0: port 79(mldk) entered forwarding state
br0: port 80(nc) entered blocking state
br0: port 80(nc) entered disabled state
device nc entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): nc: link is not ready
br0: port 80(nc) entered blocking state
br0: port 80(nc) entered forwarding state
eth0: renamed from veth7VNUF5
IPv6: ADDRCONF(NETDEV_CHANGE): nc: link becomes ready
br0: port 81(smb) entered blocking state
br0: port 81(smb) entered disabled state
device smb entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): smb: link is not ready
eth0: renamed from vethYX7I1Q
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): smb: link becomes ready
br0: port 81(smb) entered blocking state
br0: port 81(smb) entered forwarding state
br0: port 82(doc.7) entered blocking state
br0: port 82(doc.7) entered disabled state
device doc.7 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.7: link is not ready
eth0: renamed from vethPRAPSM
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.7: link becomes ready
br0: port 82(doc.7) entered blocking state
br0: port 82(doc.7) entered forwarding state
br0: port 83(doc.asdk) entered blocking state
br0: port 83(doc.asdk) entered disabled state
device doc.asdk entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.asdk: link is not ready
eth0: renamed from vethKCITH3
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.asdk: link becomes ready
br0: port 83(doc.asdk) entered blocking state
br0: port 83(doc.asdk) entered forwarding state
br0: port 84(doc.bionic) entered blocking state
br0: port 84(doc.bionic) entered disabled state
device doc.bionic entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.bionic: link is not ready
eth0: renamed from veth7O1P2W
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.bionic: link becomes ready
br0: port 84(doc.bionic) entered blocking state
br0: port 84(doc.bionic) entered forwarding state
br0: port 85(doc.c6) entered blocking state
br0: port 85(doc.c6) entered disabled state
device doc.c6 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.c6: link is not ready
eth0: renamed from vethFGQAS9
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.c6: link becomes ready
br0: port 85(doc.c6) entered blocking state
br0: port 85(doc.c6) entered forwarding state
br0: port 86(doc.c7) entered blocking state
br0: port 86(doc.c7) entered disabled state
device doc.c7 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.c7: link is not ready
eth0: renamed from vethRAV7YP
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.c7: link becomes ready
br0: port 86(doc.c7) entered blocking state
br0: port 86(doc.c7) entered forwarding state
br0: port 87(dd) entered blocking state
br0: port 87(dd) entered disabled state
device dd entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dd: link is not ready
eth0: renamed from vethMG7UAR
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dd: link becomes ready
br0: port 87(dd) entered blocking state
br0: port 87(dd) entered forwarding state
br0: port 88(doc.fb10) entered blocking state
br0: port 88(doc.fb10) entered disabled state
device doc.fb10 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.fb10: link is not ready
br0: port 88(doc.fb10) entered blocking state
br0: port 88(doc.fb10) entered forwarding state
br0: port 88(doc.fb10) entered disabled state
eth0: renamed from vethVWCESF
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.fb10: link becomes ready
br0: port 88(doc.fb10) entered blocking state
br0: port 88(doc.fb10) entered forwarding state
docker0: port 1(vetha246cd0) entered blocking state
docker0: port 1(vetha246cd0) entered disabled state
device vetha246cd0 entered promiscuous mode
br0: port 89(doc.fdr.24) entered blocking state
br0: port 89(doc.fdr.24) entered disabled state
device doc.fdr.24 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.fdr.24: link is not ready
br0: port 89(doc.fdr.24) entered blocking state
br0: port 89(doc.fdr.24) entered forwarding state
br0: port 89(doc.fdr.24) entered disabled state
eth0: renamed from veth845Q88
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.fdr.24: link becomes ready
br0: port 89(doc.fdr.24) entered blocking state
br0: port 89(doc.fdr.24) entered forwarding state
eth0: renamed from vethcb48b21
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 1(vetha246cd0) entered blocking state
docker0: port 1(vetha246cd0) entered forwarding state
br0: port 90(doc.jessie) entered blocking state
br0: port 90(doc.jessie) entered disabled state
device doc.jessie entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.jessie: link is not ready
audit: type=1400 audit(1529129911.024:44): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/dev/shm/" pid=4123 comm="mount" flags="rw, nosuid, nodev, remount"
audit: type=1400 audit(1529129911.024:45): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=4122 comm="mount" flags="rw, remount"
docker0: port 1(veth9a29954) entered blocking state
docker0: port 1(veth9a29954) entered disabled state
device veth9a29954 entered promiscuous mode
docker0: port 1(veth9a29954) entered blocking state
docker0: port 1(veth9a29954) entered forwarding state
docker0: port 1(veth9a29954) entered disabled state
eth0: renamed from veth6A4F0Y
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.jessie: link becomes ready
br0: port 90(doc.jessie) entered blocking state
br0: port 90(doc.jessie) entered forwarding state
br0: port 91(doc.mvrks) entered blocking state
br0: port 91(doc.mvrks) entered disabled state
device doc.mvrks entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.mvrks: link is not ready
eth0: renamed from veth1348c08
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 1(veth9a29954) entered blocking state
docker0: port 1(veth9a29954) entered forwarding state
eth0: renamed from vethOAEJJH
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.mvrks: link becomes ready
br0: port 91(doc.mvrks) entered blocking state
br0: port 91(doc.mvrks) entered forwarding state
br0: port 92(doc.ob) entered blocking state
br0: port 92(doc.ob) entered disabled state
device doc.ob entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.ob: link is not ready
eth0: renamed from vethB8ERM3
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.ob: link becomes ready
br0: port 92(doc.ob) entered blocking state
br0: port 92(doc.ob) entered forwarding state
audit: type=1400 audit(1529129921.343:46): apparmor="STATUS" operation="profile_replace" info="not policy admin" error=-13 profile="unconfined" pid=10721 comm="apparmor_parser"
br0: port 93(doc.oo) entered blocking state
br0: port 93(doc.oo) entered disabled state
device doc.oo entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.oo: link is not ready
eth0: renamed from vethUJB1NJ
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.oo: link becomes ready
br0: port 93(doc.oo) entered blocking state
br0: port 93(doc.oo) entered forwarding state
br0: port 94(doc.sierra) entered blocking state
br0: port 94(doc.sierra) entered disabled state
device doc.sierra entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.sierra: link is not ready
eth0: renamed from veth54NH90
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.sierra: link becomes ready
br0: port 94(doc.sierra) entered blocking state
br0: port 94(doc.sierra) entered forwarding state
br0: port 95(doc.so) entered blocking state
br0: port 95(doc.so) entered disabled state
device doc.so entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.so: link is not ready
eth0: renamed from vethSCRWJR
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.so: link becomes ready
br0: port 95(doc.so) entered blocking state
br0: port 95(doc.so) entered forwarding state
br0: port 96(doc.stretch) entered blocking state
br0: port 96(doc.stretch) entered disabled state
device doc.stretch entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.stretch: link is not ready
eth0: renamed from vethVMX9S1
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.stretch: link becomes ready
br0: port 96(doc.stretch) entered blocking state
br0: port 96(doc.stretch) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
br0: port 97(doc.stretch.bp) entered blocking state
br0: port 97(doc.stretch.bp) entered disabled state
device doc.stretch.bp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.stretch.bp: link is not ready
br0: port 97(doc.stretch.bp) entered blocking state
br0: port 97(doc.stretch.bp) entered forwarding state
br0: port 97(doc.stretch.bp) entered disabled state
eth0: renamed from vethW9JEQE
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.stretch.bp: link becomes ready
br0: port 97(doc.stretch.bp) entered blocking state
br0: port 97(doc.stretch.bp) entered forwarding state
br0: port 98(doc.trusty) entered blocking state
br0: port 98(doc.trusty) entered disabled state
device doc.trusty entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.trusty: link is not ready
br0: port 98(doc.trusty) entered blocking state
br0: port 98(doc.trusty) entered forwarding state
br0: port 98(doc.trusty) entered disabled state
eth0: renamed from veth4XO340
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.trusty: link becomes ready
br0: port 98(doc.trusty) entered blocking state
br0: port 98(doc.trusty) entered forwarding state
br0: port 99(doc.wheezy) entered blocking state
br0: port 99(doc.wheezy) entered disabled state
device doc.wheezy entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.wheezy: link is not ready
eth0: renamed from veth3XH8H6
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.wheezy: link becomes ready
br0: port 99(doc.wheezy) entered blocking state
br0: port 99(doc.wheezy) entered forwarding state
br0: port 100(doc.xenial) entered blocking state
br0: port 100(doc.xenial) entered disabled state
device doc.xenial entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.xenial: link is not ready
eth0: renamed from vethR3PJK6
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.xenial: link becomes ready
br0: port 100(doc.xenial) entered blocking state
br0: port 100(doc.xenial) entered forwarding state
br0: port 101(doc.ysmt) entered blocking state
br0: port 101(doc.ysmt) entered disabled state
device doc.ysmt entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.ysmt: link is not ready
eth0: renamed from vethO7JHTY
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.ysmt: link becomes ready
br0: port 101(doc.ysmt) entered blocking state
br0: port 101(doc.ysmt) entered forwarding state
br0: port 102(og) entered blocking state
br0: port 102(og) entered disabled state
device og entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): og: link is not ready
eth0: renamed from vethLSKCQW
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): og: link becomes ready
br0: port 102(og) entered blocking state
br0: port 102(og) entered forwarding state
br0: port 103(bionic.kvm) entered blocking state
br0: port 103(bionic.kvm) entered disabled state
device bionic.kvm entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): bionic.kvm: link is not ready
eth0: renamed from vethON4I7V
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): bionic.kvm: link becomes ready
br0: port 103(bionic.kvm) entered blocking state
br0: port 103(bionic.kvm) entered forwarding state
docker0: port 1(veth0a89a22) entered blocking state
docker0: port 1(veth0a89a22) entered disabled state
device veth0a89a22 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth0a89a22: link is not ready
docker0: port 1(veth0a89a22) entered blocking state
docker0: port 1(veth0a89a22) entered forwarding state
docker0: port 1(veth0a89a22) entered disabled state
docker0: port 2(veth5ee5ce2) entered blocking state
docker0: port 2(veth5ee5ce2) entered disabled state
device veth5ee5ce2 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth5ee5ce2: link is not ready
docker0: port 2(veth5ee5ce2) entered blocking state
docker0: port 2(veth5ee5ce2) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
docker0: port 2(veth5ee5ce2) entered disabled state
br0: port 104(xm) entered blocking state
br0: port 104(xm) entered disabled state
device xm entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): xm: link is not ready
br0: port 104(xm) entered blocking state
br0: port 104(xm) entered forwarding state
audit: type=1400 audit(1529129938.231:47): apparmor="STATUS" operation="profile_replace" info="not policy admin" error=-13 profile="unconfined" pid=21087 comm="apparmor_parser"
eth0: renamed from vethLUSF2S
audit: type=1400 audit(1529129938.267:48): apparmor="STATUS" operation="profile_replace" info="not policy admin" error=-13 profile="unconfined" pid=21108 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_CHANGE): xm: link becomes ready
docker0: port 1(veth0a89a22) entered disabled state
device veth0a89a22 left promiscuous mode
docker0: port 1(veth0a89a22) entered disabled state
docker0: port 2(veth5ee5ce2) entered disabled state
device veth5ee5ce2 left promiscuous mode
docker0: port 2(veth5ee5ce2) entered disabled state
br0: port 1(eth0) entered blocking state
br0: port 1(eth0) entered disabled state
device eth0 entered promiscuous mode
br0: port 1(eth0) entered blocking state
br0: port 1(eth0) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
br0: port 1(eth0) entered blocking state
br0: port 1(eth0) entered disabled state
device eth0 entered promiscuous mode
br0: port 1(eth0) entered blocking state
br0: port 1(eth0) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
NFSD: attempt to initialize umh client tracking in a container ignored.
NFSD: attempt to initialize legacy client tracking in a container ignored.
NFSD: Unable to initialize client recovery tracking! (-22)
NFSD: starting 90-second grace period (net f0002cba)
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
NFSD: attempt to initialize umh client tracking in a container ignored.
NFSD: attempt to initialize legacy client tracking in a container ignored.
NFSD: Unable to initialize client recovery tracking! (-22)
NFSD: starting 90-second grace period (net f0002c53)
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
br0: port 43(gfw.tor.kr) entered disabled state
br0: port 43(gfw.tor.kr) entered disabled state
device gfw.tor.kr left promiscuous mode
br0: port 43(gfw.tor.kr) entered disabled state
br0: port 43(gfw.tor.kr) entered blocking state
br0: port 43(gfw.tor.kr) entered disabled state
device gfw.tor.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gfw.tor.kr: link is not ready
eth0: renamed from vethNCPJ9A
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gfw.tor.kr: link becomes ready
br0: port 43(gfw.tor.kr) entered blocking state
br0: port 43(gfw.tor.kr) entered forwarding state
br0: port 23(m.h) entered disabled state
br0: port 23(m.h) entered disabled state
device m.h left promiscuous mode
br0: port 23(m.h) entered disabled state
br0: port 23(m.h) entered blocking state
br0: port 23(m.h) entered disabled state
device m.h entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): m.h: link is not ready
eth0: renamed from veth1Y6S03
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): m.h: link becomes ready
br0: port 23(m.h) entered blocking state
br0: port 23(m.h) entered forwarding state
TCP: request_sock_TCP: Possible SYN flooding on port 46882. Sending cookies. Check SNMP counters.
br0: port 8(dns.psi.all) entered disabled state
br0: port 8(dns.psi.all) entered disabled state
device dns.psi.all left promiscuous mode
br0: port 8(dns.psi.all) entered disabled state
br0: port 8(dns.psi.all) entered blocking state
br0: port 8(dns.psi.all) entered disabled state
device dns.psi.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.psi.all: link is not ready
eth0: renamed from veth8B00O0
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.psi.all: link becomes ready
br0: port 8(dns.psi.all) entered blocking state
br0: port 8(dns.psi.all) entered forwarding state
usb 2-1.3-port2: disabled by hub (EMI?), re-enabling...
usb 2-1.3.2: USB disconnect, device number 6
usb 2-1.3.2: new low-speed USB device number 7 using ehci-pci
usb 2-1.3.2: New USB device found, idVendor=0a81, idProduct=0101
usb 2-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3.2: Product: USB Keyboard
usb 2-1.3.2: Manufacturer: CHESEN
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.0/0003:0A81:0101.0007/input/input8
hid-generic 0003:0A81:0101.0007: input,hidraw3: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1d.0-1.3.2/input0
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.1/0003:0A81:0101.0008/input/input9
hid-generic 0003:0A81:0101.0008: input,hidraw4: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1d.0-1.3.2/input1
usb 2-1.3-port2: disabled by hub (EMI?), re-enabling...
usb 2-1.3.2: USB disconnect, device number 7
usb 2-1.3.2: new low-speed USB device number 8 using ehci-pci
usb 2-1.3.2: device descriptor read/64, error -32
usb 2-1.3.2: device not accepting address 8, error -32
usb 2-1.3.2: new low-speed USB device number 9 using ehci-pci
usb 2-1.3.2: New USB device found, idVendor=0a81, idProduct=0101
usb 2-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3.2: Product: USB Keyboard
usb 2-1.3.2: Manufacturer: CHESEN
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.0/0003:0A81:0101.0009/input/input10
hid-generic 0003:0A81:0101.0009: input,hidraw3: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1d.0-1.3.2/input0
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.1/0003:0A81:0101.000A/input/input11
hid-generic 0003:0A81:0101.000A: input,hidraw4: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1d.0-1.3.2/input1
br0: port 44(gfw.tor.us) entered disabled state
br0: port 44(gfw.tor.us) entered disabled state
device gfw.tor.us left promiscuous mode
br0: port 44(gfw.tor.us) entered disabled state
br0: port 44(gfw.tor.us) entered blocking state
br0: port 44(gfw.tor.us) entered disabled state
device gfw.tor.us entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gfw.tor.us: link is not ready
br0: port 44(gfw.tor.us) entered blocking state
br0: port 44(gfw.tor.us) entered forwarding state
br0: port 44(gfw.tor.us) entered disabled state
eth0: renamed from vethG1IL7A
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gfw.tor.us: link becomes ready
br0: port 44(gfw.tor.us) entered blocking state
br0: port 44(gfw.tor.us) entered forwarding state
audit: type=1400 audit(1529132645.387:49): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=1710 comm="mount" flags="rw, remount"
audit: type=1400 audit(1529132645.387:50): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/dev/shm/" pid=1711 comm="mount" flags="rw, nosuid, nodev, remount"
audit: type=1400 audit(1529132645.647:51): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=2167 comm="(tor)" flags="rw, rslave"
audit: type=1400 audit(1529132645.923:52): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=2244 comm="(tor)" flags="rw, rslave"
usb 2-1.3-port2: disabled by hub (EMI?), re-enabling...
usb 2-1.3.2: USB disconnect, device number 9
usb 2-1.3.2: new low-speed USB device number 10 using ehci-pci
usb 2-1.3.2: New USB device found, idVendor=0a81, idProduct=0101
usb 2-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3.2: Product: USB Keyboard
usb 2-1.3.2: Manufacturer: CHESEN
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.0/0003:0A81:0101.000B/input/input12
hid-generic 0003:0A81:0101.000B: input,hidraw3: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1d.0-1.3.2/input0
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.1/0003:0A81:0101.000C/input/input13
hid-generic 0003:0A81:0101.000C: input,hidraw4: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1d.0-1.3.2/input1
perf: interrupt took too long (2590 > 2500), lowering kernel.perf_event_max_sample_rate to 77000
br0: port 24(mm) entered disabled state
br0: port 24(mm) entered disabled state
device mm left promiscuous mode
br0: port 24(mm) entered disabled state
br0: port 24(mm) entered blocking state
br0: port 24(mm) entered disabled state
device mm entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): mm: link is not ready
br0: port 24(mm) entered blocking state
br0: port 24(mm) entered forwarding state
eth0: renamed from vethHNQU7N
IPv6: ADDRCONF(NETDEV_CHANGE): mm: link becomes ready
br0: port 18(gw.f) entered disabled state
br0: port 18(gw.f) entered disabled state
device gw.f left promiscuous mode
br0: port 18(gw.f) entered disabled state
br0: port 18(gw.f) entered blocking state
br0: port 18(gw.f) entered disabled state
device gw.f entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gw.f: link is not ready
br0: port 18(gw.f) entered blocking state
br0: port 18(gw.f) entered forwarding state
br0: port 18(gw.f) entered disabled state
eth0: renamed from vethYR7PFL
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gw.f: link becomes ready
br0: port 18(gw.f) entered blocking state
br0: port 18(gw.f) entered forwarding state
perf: interrupt took too long (3240 > 3237), lowering kernel.perf_event_max_sample_rate to 61500
br0: port 14(g.stretch) entered disabled state
device g.stretch left promiscuous mode
br0: port 14(g.stretch) entered disabled state
br0: port 14(g.stretch) entered blocking state
br0: port 14(g.stretch) entered disabled state
device g.stretch entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): g.stretch: link is not ready
eth0: renamed from veth882A9G
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): g.stretch: link becomes ready
br0: port 14(g.stretch) entered blocking state
br0: port 14(g.stretch) entered forwarding state
usb 2-1.3.1: reset low-speed USB device number 5 using ehci-pci
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.1/2-1.3.1:1.0/0003:046D:C062.000D/input/input14
hid-generic 0003:046D:C062.000D: input,hidraw5: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-1.3.1/input0
usb 2-1.3.1: USB disconnect, device number 5
usb 2-1.3.2: USB disconnect, device number 10
usb 2-1.3: reset high-speed USB device number 3 using ehci-pci
usb 2-1.3: reset high-speed USB device number 3 using ehci-pci
usb 2-1.3: reset high-speed USB device number 3 using ehci-pci
usb 2-1.3: reset high-speed USB device number 3 using ehci-pci
usb 2-1.3: reset high-speed USB device number 3 using ehci-pci
usb 2-1.3: reset high-speed USB device number 3 using ehci-pci
usb 2-1.3: reset high-speed USB device number 3 using ehci-pci
usb 2-1.3: reset high-speed USB device number 3 using ehci-pci
usb 2-1.3: reset high-speed USB device number 3 using ehci-pci
usb 2-1.3: reset high-speed USB device number 3 using ehci-pci
hub 2-1.3:1.0: USB hub found
hub 2-1.3:1.0: 4 ports detected
usb 2-1.3.1: new low-speed USB device number 11 using ehci-pci
usb 2-1.3.1: New USB device found, idVendor=046d, idProduct=c062
usb 2-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3.1: Product: USB Laser Mouse
usb 2-1.3.1: Manufacturer: Logitech
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.1/2-1.3.1:1.0/0003:046D:C062.000E/input/input15
hid-generic 0003:046D:C062.000E: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-1.3.1/input0
usb 2-1.3.2: new low-speed USB device number 12 using ehci-pci
usb 2-1.3.2: New USB device found, idVendor=0a81, idProduct=0101
usb 2-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3.2: Product: USB Keyboard
usb 2-1.3.2: Manufacturer: CHESEN
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.0/0003:0A81:0101.000F/input/input16
hid-generic 0003:0A81:0101.000F: input,hidraw4: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1d.0-1.3.2/input0
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.1/0003:0A81:0101.0010/input/input17
hid-generic 0003:0A81:0101.0010: input,hidraw5: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1d.0-1.3.2/input1
usb 2-1.3.1: reset low-speed USB device number 11 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 11 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 11 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 12 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 12 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 12 using ehci-pci
br0: port 17(gw.cow) entered disabled state
br0: port 17(gw.cow) entered disabled state
device gw.cow left promiscuous mode
br0: port 17(gw.cow) entered disabled state
br0: port 17(gw.cow) entered blocking state
br0: port 17(gw.cow) entered disabled state
device gw.cow entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gw.cow: link is not ready
eth0: renamed from veth2U35ST
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gw.cow: link becomes ready
br0: port 17(gw.cow) entered blocking state
br0: port 17(gw.cow) entered forwarding state
br0: port 10(vnet0) entered disabled state
device vnet0 left promiscuous mode
br0: port 10(vnet0) entered disabled state
br0: port 10(vnet0) entered blocking state
br0: port 10(vnet0) entered disabled state
device vnet0 entered promiscuous mode
br0: port 10(vnet0) entered blocking state
br0: port 10(vnet0) entered forwarding state
usb 2-1.3.1: reset low-speed USB device number 11 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 12 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 11 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 12 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 11 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 12 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 11 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 12 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 11 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 12 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 11 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 12 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 11 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 12 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 11 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 12 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 11 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 12 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 11 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 11 using ehci-pci
usb 2-1.3.1: reset low-speed USB device number 11 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 12 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 12 using ehci-pci
usb 2-1.3.2: reset low-speed USB device number 12 using ehci-pci
perf: interrupt took too long (4086 > 4050), lowering kernel.perf_event_max_sample_rate to 48750
br0: port 7(dns.psi.a1) entered disabled state
br0: port 7(dns.psi.a1) entered disabled state
device dns.psi.a1 left promiscuous mode
br0: port 7(dns.psi.a1) entered disabled state
br0: port 7(dns.psi.a1) entered blocking state
br0: port 7(dns.psi.a1) entered disabled state
device dns.psi.a1 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.psi.a1: link is not ready
eth0: renamed from veth1217QK
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.psi.a1: link becomes ready
br0: port 7(dns.psi.a1) entered blocking state
br0: port 7(dns.psi.a1) entered forwarding state
br0: port 11(dns.wj.all) entered disabled state
br0: port 11(dns.wj.all) entered disabled state
device dns.wj.all left promiscuous mode
br0: port 11(dns.wj.all) entered disabled state
br0: port 11(dns.wj.all) entered blocking state
br0: port 11(dns.wj.all) entered disabled state
device dns.wj.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.wj.all: link is not ready
eth0: renamed from veth9T57HH
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.wj.all: link becomes ready
br0: port 11(dns.wj.all) entered blocking state
br0: port 11(dns.wj.all) entered forwarding state
audit: type=1400 audit(1529142064.751:53): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=21345 comm="mount" flags="rw, remount"
audit: type=1400 audit(1529142064.751:54): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/dev/shm/" pid=21346 comm="mount" flags="rw, nosuid, nodev, remount"
br0: port 32(wj.jp) entered disabled state
br0: port 32(wj.jp) entered disabled state
device wj.jp left promiscuous mode
br0: port 32(wj.jp) entered disabled state
br0: port 32(wj.jp) entered blocking state
br0: port 32(wj.jp) entered disabled state
device wj.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): wj.jp: link is not ready
eth0: renamed from vethX06XOD
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): wj.jp: link becomes ready
br0: port 32(wj.jp) entered blocking state
br0: port 32(wj.jp) entered forwarding state
perf: interrupt took too long (5114 > 5107), lowering kernel.perf_event_max_sample_rate to 39000
br0: port 83(doc.asdk) entered disabled state
br0: port 83(doc.asdk) entered disabled state
device doc.asdk left promiscuous mode
br0: port 83(doc.asdk) entered disabled state
br0: port 83(doc.asdk) entered blocking state
br0: port 83(doc.asdk) entered disabled state
device doc.asdk entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.asdk: link is not ready
eth0: renamed from vethJ3L02P
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.asdk: link becomes ready
br0: port 83(doc.asdk) entered blocking state
br0: port 83(doc.asdk) entered forwarding state
perf: interrupt took too long (6460 > 6392), lowering kernel.perf_event_max_sample_rate to 30750
br0: port 46(ovpn.all) entered disabled state
br0: port 46(ovpn.all) entered disabled state
device ovpn.all left promiscuous mode
br0: port 46(ovpn.all) entered disabled state
br0: port 46(ovpn.all) entered blocking state
br0: port 46(ovpn.all) entered disabled state
device ovpn.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.all: link is not ready
eth0: renamed from veth7473G7
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.all: link becomes ready
br0: port 46(ovpn.all) entered blocking state
br0: port 46(ovpn.all) entered forwarding state
br0: port 31(psi.meek) entered disabled state
br0: port 30(psi.kr) entered disabled state
br0: port 31(psi.meek) entered disabled state
device psi.meek left promiscuous mode
br0: port 31(psi.meek) entered disabled state
br0: port 30(psi.kr) entered disabled state
device psi.kr left promiscuous mode
br0: port 30(psi.kr) entered disabled state
br0: port 30(psi.meek) entered blocking state
br0: port 30(psi.meek) entered disabled state
device psi.meek entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): psi.meek: link is not ready
br0: port 31(psi.kr) entered blocking state
br0: port 31(psi.kr) entered disabled state
device psi.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): psi.kr: link is not ready
br0: port 31(psi.kr) entered blocking state
br0: port 31(psi.kr) entered forwarding state
eth0: renamed from vethRDBE3L
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
br0: port 31(psi.kr) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): psi.meek: link becomes ready
br0: port 30(psi.meek) entered blocking state
br0: port 30(psi.meek) entered forwarding state
eth0: renamed from veth1LGOMF
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): psi.kr: link becomes ready
br0: port 31(psi.kr) entered blocking state
br0: port 31(psi.kr) entered forwarding state
br0: port 48(ovpn.jp) entered disabled state
br0: port 48(ovpn.jp) entered disabled state
device ovpn.jp left promiscuous mode
br0: port 48(ovpn.jp) entered disabled state
br0: port 48(ovpn.jp) entered blocking state
br0: port 48(ovpn.jp) entered disabled state
device ovpn.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.jp: link is not ready
br0: port 48(ovpn.jp) entered blocking state
br0: port 48(ovpn.jp) entered forwarding state
br0: port 48(ovpn.jp) entered disabled state
eth0: renamed from veth11EJ1B
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.jp: link becomes ready
br0: port 48(ovpn.jp) entered blocking state
br0: port 48(ovpn.jp) entered forwarding state
br0: port 87(dd) entered disabled state
br0: port 87(dd) entered disabled state
device dd left promiscuous mode
br0: port 87(dd) entered disabled state
br0: port 87(dd) entered blocking state
br0: port 87(dd) entered disabled state
device dd entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dd: link is not ready
eth0: renamed from vethRV4J2I
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dd: link becomes ready
br0: port 87(dd) entered blocking state
br0: port 87(dd) entered forwarding state
audit: type=1400 audit(1529147286.950:55): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/dev/shm/" pid=39230 comm="mount" flags="rw, nosuid, nodev, remount"
audit: type=1400 audit(1529147286.950:56): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=39229 comm="mount" flags="rw, remount"
br0: port 50(ovpn.kr) entered disabled state
br0: port 50(ovpn.kr) entered disabled state
device ovpn.kr left promiscuous mode
br0: port 50(ovpn.kr) entered disabled state
br0: port 50(ovpn.kr) entered blocking state
br0: port 50(ovpn.kr) entered disabled state
device ovpn.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.kr: link is not ready
eth0: renamed from veth957O6R
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.kr: link becomes ready
br0: port 50(ovpn.kr) entered blocking state
br0: port 50(ovpn.kr) entered forwarding state
br0: port 52(ovpn.us) entered disabled state
br0: port 52(ovpn.us) entered disabled state
device ovpn.us left promiscuous mode
br0: port 52(ovpn.us) entered disabled state
https_dns_proxy[31849]: segfault at 18 ip 00007f9a2a189c75 sp 00007ffe800b9510 error 4 in libcurl.so.4.3.0[7f9a2a158000+65000]
br0: port 52(ovpn.us) entered blocking state
br0: port 52(ovpn.us) entered disabled state
device ovpn.us entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.us: link is not ready
eth0: renamed from veth8BV31E
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.us: link becomes ready
br0: port 52(ovpn.us) entered blocking state
br0: port 52(ovpn.us) entered forwarding state
br0: port 56(vpg.jp) entered disabled state
br0: port 56(vpg.jp) entered disabled state
device vpg.jp left promiscuous mode
br0: port 56(vpg.jp) entered disabled state
brj: port 2(vpg.jp.brj) entered disabled state
device vpg.jp.brj left promiscuous mode
brj: port 2(vpg.jp.brj) entered disabled state
br0: port 56(vpg.jp) entered blocking state
br0: port 56(vpg.jp) entered disabled state
device vpg.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.jp: link is not ready
br0: port 56(vpg.jp) entered blocking state
br0: port 56(vpg.jp) entered forwarding state
brj: port 2(vpg.jp.brj) entered blocking state
brj: port 2(vpg.jp.brj) entered disabled state
device vpg.jp.brj entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.jp.brj: link is not ready
brj: port 2(vpg.jp.brj) entered blocking state
brj: port 2(vpg.jp.brj) entered forwarding state
br0: port 56(vpg.jp) entered disabled state
brj: port 2(vpg.jp.brj) entered disabled state
eth0: renamed from vethBR6BCY
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
eth1: renamed from vethCMFUHX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.jp: link becomes ready
br0: port 56(vpg.jp) entered blocking state
br0: port 56(vpg.jp) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.jp.brj: link becomes ready
brj: port 2(vpg.jp.brj) entered blocking state
brj: port 2(vpg.jp.brj) entered forwarding state
perf: interrupt took too long (8087 > 8075), lowering kernel.perf_event_max_sample_rate to 24500
br0: port 59(vpg.kr) entered disabled state
br0: port 59(vpg.kr) entered disabled state
device vpg.kr left promiscuous mode
br0: port 59(vpg.kr) entered disabled state
brk: port 2(vpg.kr.brk) entered disabled state
device vpg.kr.brk left promiscuous mode
brk: port 2(vpg.kr.brk) entered disabled state
br0: port 59(vpg.kr) entered blocking state
br0: port 59(vpg.kr) entered disabled state
device vpg.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.kr: link is not ready
br0: port 59(vpg.kr) entered blocking state
br0: port 59(vpg.kr) entered forwarding state
brk: port 2(vpg.kr.brk) entered blocking state
brk: port 2(vpg.kr.brk) entered disabled state
device vpg.kr.brk entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.kr.brk: link is not ready
brk: port 2(vpg.kr.brk) entered blocking state
brk: port 2(vpg.kr.brk) entered forwarding state
eth0: renamed from vethUP63CC
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.kr: link becomes ready
brk: port 2(vpg.kr.brk) entered disabled state
eth1: renamed from vethAECV62
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.kr.brk: link becomes ready
brk: port 2(vpg.kr.brk) entered blocking state
brk: port 2(vpg.kr.brk) entered forwarding state
br0: port 62(vpg.prx.all) entered disabled state
br0: port 62(vpg.prx.all) entered disabled state
device vpg.prx.all left promiscuous mode
br0: port 62(vpg.prx.all) entered disabled state
br0: port 62(vpg.prx.all) entered blocking state
br0: port 62(vpg.prx.all) entered disabled state
device vpg.prx.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.prx.all: link is not ready
eth0: renamed from vethC5E1KT
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.prx.all: link becomes ready
br0: port 62(vpg.prx.all) entered blocking state
br0: port 62(vpg.prx.all) entered forwarding state
audit: type=1400 audit(1529152565.954:57): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=37665 comm="mount" flags="rw, remount"
audit: type=1400 audit(1529152565.954:58): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/dev/shm/" pid=37666 comm="mount" flags="rw, nosuid, nodev, remount"
br0: port 63(vpg.prx.jp) entered disabled state
br0: port 63(vpg.prx.jp) entered disabled state
device vpg.prx.jp left promiscuous mode
br0: port 63(vpg.prx.jp) entered disabled state
br0: port 63(vpg.prx.jp) entered blocking state
br0: port 63(vpg.prx.jp) entered disabled state
device vpg.prx.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.prx.jp: link is not ready
eth0: renamed from vethWHQBMG
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.prx.jp: link becomes ready
br0: port 63(vpg.prx.jp) entered blocking state
br0: port 63(vpg.prx.jp) entered forwarding state
br0: port 64(vpg.prx.kr) entered disabled state
br0: port 64(vpg.prx.kr) entered disabled state
device vpg.prx.kr left promiscuous mode
br0: port 64(vpg.prx.kr) entered disabled state
br0: port 64(vpg.prx.kr) entered blocking state
br0: port 64(vpg.prx.kr) entered disabled state
device vpg.prx.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.prx.kr: link is not ready
eth0: renamed from vethFGFI4R
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.prx.kr: link becomes ready
br0: port 64(vpg.prx.kr) entered blocking state
br0: port 64(vpg.prx.kr) entered forwarding state
br0: port 65(vpg.prx.us) entered disabled state
br0: port 65(vpg.prx.us) entered disabled state
device vpg.prx.us left promiscuous mode
br0: port 65(vpg.prx.us) entered disabled state
br0: port 65(vpg.prx.us) entered blocking state
br0: port 65(vpg.prx.us) entered disabled state
device vpg.prx.us entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.prx.us: link is not ready
br0: port 65(vpg.prx.us) entered blocking state
br0: port 65(vpg.prx.us) entered forwarding state
br0: port 65(vpg.prx.us) entered disabled state
eth0: renamed from veth67YX7W
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.prx.us: link becomes ready
br0: port 65(vpg.prx.us) entered blocking state
br0: port 65(vpg.prx.us) entered forwarding state
docker0: port 1(vetha246cd0) entered disabled state
vethcb48b21: renamed from eth0
docker0: port 1(vetha246cd0) entered disabled state
device vetha246cd0 left promiscuous mode
docker0: port 1(vetha246cd0) entered disabled state
br0: port 76(docker.mirror) entered disabled state
br0: port 76(docker.mirror) entered disabled state
device docker.mirror left promiscuous mode
br0: port 76(docker.mirror) entered disabled state
br0: port 76(docker.mirror) entered blocking state
br0: port 76(docker.mirror) entered disabled state
device docker.mirror entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): docker.mirror: link is not ready
eth0: renamed from vethNGCNTB
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): docker.mirror: link becomes ready
br0: port 76(docker.mirror) entered blocking state
br0: port 76(docker.mirror) entered forwarding state
docker0: port 1(vethc716e48) entered blocking state
docker0: port 1(vethc716e48) entered disabled state
device vethc716e48 entered promiscuous mode
eth0: renamed from vethda40730
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 1(vethc716e48) entered blocking state
docker0: port 1(vethc716e48) entered forwarding state
br0: port 66(vpg.us) entered disabled state
br0: port 66(vpg.us) entered disabled state
device vpg.us left promiscuous mode
br0: port 66(vpg.us) entered disabled state
bru: port 2(vpg.us.bru) entered disabled state
device vpg.us.bru left promiscuous mode
bru: port 2(vpg.us.bru) entered disabled state
br0: port 66(vpg.us) entered blocking state
br0: port 66(vpg.us) entered disabled state
device vpg.us entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.us: link is not ready
br0: port 66(vpg.us) entered blocking state
br0: port 66(vpg.us) entered forwarding state
bru: port 2(vpg.us.bru) entered blocking state
bru: port 2(vpg.us.bru) entered disabled state
device vpg.us.bru entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.us.bru: link is not ready
bru: port 2(vpg.us.bru) entered blocking state
bru: port 2(vpg.us.bru) entered forwarding state
br0: port 66(vpg.us) entered disabled state
bru: port 2(vpg.us.bru) entered disabled state
eth0: renamed from veth04VDKY
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.us: link becomes ready
br0: port 66(vpg.us) entered blocking state
br0: port 66(vpg.us) entered forwarding state
eth1: renamed from vethSDP86D
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.us.bru: link becomes ready
bru: port 2(vpg.us.bru) entered blocking state
bru: port 2(vpg.us.bru) entered forwarding state
br0: port 8(dns.psi.all) entered disabled state
br0: port 8(dns.psi.all) entered disabled state
device dns.psi.all left promiscuous mode
br0: port 8(dns.psi.all) entered disabled state
br0: port 8(dns.psi.all) entered blocking state
br0: port 8(dns.psi.all) entered disabled state
device dns.psi.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.psi.all: link is not ready
eth0: renamed from vethSB4XM5
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.psi.all: link becomes ready
br0: port 8(dns.psi.all) entered blocking state
br0: port 8(dns.psi.all) entered forwarding state
docker0: port 1(veth9a29954) entered disabled state
veth1348c08: renamed from eth0
docker0: port 1(veth9a29954) entered disabled state
device veth9a29954 left promiscuous mode
docker0: port 1(veth9a29954) entered disabled state
br0: port 77(docker.registry) entered disabled state
br0: port 77(docker.registry) entered disabled state
device docker.registry left promiscuous mode
br0: port 77(docker.registry) entered disabled state
br0: port 77(docker.registry) entered blocking state
br0: port 77(docker.registry) entered disabled state
device docker.registry entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): docker.registry: link is not ready
eth0: renamed from veth5TUCF0
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): docker.registry: link becomes ready
br0: port 77(docker.registry) entered blocking state
br0: port 77(docker.registry) entered forwarding state
docker0: port 1(veth6428d4f) entered blocking state
docker0: port 1(veth6428d4f) entered disabled state
device veth6428d4f entered promiscuous mode
docker0: port 1(veth6428d4f) entered blocking state
docker0: port 1(veth6428d4f) entered forwarding state
docker0: port 1(veth6428d4f) entered disabled state
eth0: renamed from veth873d8f3
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 1(veth6428d4f) entered blocking state
docker0: port 1(veth6428d4f) entered forwarding state
br0: port 70(vpn.all) entered disabled state
br0: port 70(vpn.all) entered disabled state
device vpn.all left promiscuous mode
br0: port 70(vpn.all) entered disabled state
br0: port 70(vpn.all) entered blocking state
br0: port 70(vpn.all) entered disabled state
device vpn.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpn.all: link is not ready
eth0: renamed from vethK25RPI
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpn.all: link becomes ready
br0: port 70(vpn.all) entered blocking state
br0: port 70(vpn.all) entered forwarding state
br0: port 71(vpn.jp) entered disabled state
br0: port 71(vpn.jp) entered disabled state
device vpn.jp left promiscuous mode
br0: port 71(vpn.jp) entered disabled state
br0: port 71(vpn.jp) entered blocking state
br0: port 71(vpn.jp) entered disabled state
device vpn.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpn.jp: link is not ready
eth0: renamed from veth4AU2YP
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpn.jp: link becomes ready
br0: port 71(vpn.jp) entered blocking state
br0: port 71(vpn.jp) entered forwarding state
br0: port 72(vpn.kr) entered disabled state
br0: port 72(vpn.kr) entered disabled state
device vpn.kr left promiscuous mode
br0: port 72(vpn.kr) entered disabled state
br0: port 72(vpn.kr) entered blocking state
br0: port 72(vpn.kr) entered disabled state
device vpn.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpn.kr: link is not ready
eth0: renamed from veth0SKTLN
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpn.kr: link becomes ready
br0: port 72(vpn.kr) entered blocking state
br0: port 72(vpn.kr) entered forwarding state
br0: port 73(vpn.us) entered disabled state
br0: port 73(vpn.us) entered disabled state
device vpn.us left promiscuous mode
br0: port 73(vpn.us) entered disabled state
br0: port 73(vpn.us) entered blocking state
br0: port 73(vpn.us) entered disabled state
device vpn.us entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpn.us: link is not ready
eth0: renamed from vethN6SYFY
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpn.us: link becomes ready
br0: port 73(vpn.us) entered blocking state
br0: port 73(vpn.us) entered forwarding state
igb 0000:04:00.0 enp4s0f0: igb: enp4s0f0 NIC Link is Down
br0: port 1(enp4s0f0) entered disabled state
brv4: port 1(enp4s0f0.4) entered disabled state
brv66: port 1(enp4s0f0.66) entered disabled state
brj: port 1(enp4s0f0.100) entered disabled state
brk: port 1(enp4s0f0.101) entered disabled state
bru: port 1(enp4s0f0.102) entered disabled state
brjs: port 1(enp4s0f0.103) entered disabled state
brks: port 1(enp4s0f0.104) entered disabled state
brus: port 1(enp4s0f0.105) entered disabled state
igb 0000:04:00.0 enp4s0f0: igb: enp4s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
br0: port 1(enp4s0f0) entered blocking state
br0: port 1(enp4s0f0) entered forwarding state
brv4: port 1(enp4s0f0.4) entered blocking state
brv4: port 1(enp4s0f0.4) entered forwarding state
brv66: port 1(enp4s0f0.66) entered blocking state
brv66: port 1(enp4s0f0.66) entered forwarding state
brj: port 1(enp4s0f0.100) entered blocking state
brj: port 1(enp4s0f0.100) entered forwarding state
brk: port 1(enp4s0f0.101) entered blocking state
brk: port 1(enp4s0f0.101) entered forwarding state
bru: port 1(enp4s0f0.102) entered blocking state
bru: port 1(enp4s0f0.102) entered forwarding state
brjs: port 1(enp4s0f0.103) entered blocking state
brjs: port 1(enp4s0f0.103) entered forwarding state
brks: port 1(enp4s0f0.104) entered blocking state
brks: port 1(enp4s0f0.104) entered forwarding state
brus: port 1(enp4s0f0.105) entered blocking state
brus: port 1(enp4s0f0.105) entered forwarding state
igb 0000:04:00.0 enp4s0f0: igb: enp4s0f0 NIC Link is Down
br0: port 1(enp4s0f0) entered disabled state
brv4: port 1(enp4s0f0.4) entered disabled state
brv66: port 1(enp4s0f0.66) entered disabled state
brj: port 1(enp4s0f0.100) entered disabled state
brk: port 1(enp4s0f0.101) entered disabled state
bru: port 1(enp4s0f0.102) entered disabled state
brjs: port 1(enp4s0f0.103) entered disabled state
brks: port 1(enp4s0f0.104) entered disabled state
brus: port 1(enp4s0f0.105) entered disabled state
igb 0000:04:00.0 enp4s0f0: igb: enp4s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
br0: port 1(enp4s0f0) entered blocking state
br0: port 1(enp4s0f0) entered forwarding state
brv4: port 1(enp4s0f0.4) entered blocking state
brv4: port 1(enp4s0f0.4) entered forwarding state
brv66: port 1(enp4s0f0.66) entered blocking state
brv66: port 1(enp4s0f0.66) entered forwarding state
brj: port 1(enp4s0f0.100) entered blocking state
brj: port 1(enp4s0f0.100) entered forwarding state
brk: port 1(enp4s0f0.101) entered blocking state
brk: port 1(enp4s0f0.101) entered forwarding state
bru: port 1(enp4s0f0.102) entered blocking state
bru: port 1(enp4s0f0.102) entered forwarding state
brjs: port 1(enp4s0f0.103) entered blocking state
brjs: port 1(enp4s0f0.103) entered forwarding state
brks: port 1(enp4s0f0.104) entered blocking state
brks: port 1(enp4s0f0.104) entered forwarding state
brus: port 1(enp4s0f0.105) entered blocking state
brus: port 1(enp4s0f0.105) entered forwarding state
br0: port 13(dt) entered disabled state
br0: port 13(dt) entered disabled state
device dt left promiscuous mode
br0: port 13(dt) entered disabled state
br0: port 13(dt) entered blocking state
br0: port 13(dt) entered disabled state
device dt entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dt: link is not ready
eth0: renamed from vethERIHLK
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dt: link becomes ready
br0: port 13(dt) entered blocking state
br0: port 13(dt) entered forwarding state
br0: port 29(psi.k1) entered disabled state
br0: port 29(psi.k1) entered disabled state
device psi.k1 left promiscuous mode
br0: port 29(psi.k1) entered disabled state
br0: port 29(psi.k1) entered blocking state
br0: port 29(psi.k1) entered disabled state
device psi.k1 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): psi.k1: link is not ready
eth0: renamed from vethK8PMJ2
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): psi.k1: link becomes ready
br0: port 29(psi.k1) entered blocking state
br0: port 29(psi.k1) entered forwarding state
br0: port 74(wkf) entered disabled state
br0: port 74(wkf) entered disabled state
device wkf left promiscuous mode
br0: port 74(wkf) entered disabled state
br0: port 74(wkf) entered blocking state
br0: port 74(wkf) entered disabled state
device wkf entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): wkf: link is not ready
br0: port 74(wkf) entered blocking state
br0: port 74(wkf) entered forwarding state
br0: port 74(wkf) entered disabled state
eth0: renamed from veth9PEBGL
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): wkf: link becomes ready
br0: port 74(wkf) entered blocking state
br0: port 74(wkf) entered forwarding state
br0: port 8(dns.psi.all) entered disabled state
br0: port 8(dns.psi.all) entered disabled state
device dns.psi.all left promiscuous mode
br0: port 8(dns.psi.all) entered disabled state
br0: port 8(dns.psi.all) entered blocking state
br0: port 8(dns.psi.all) entered disabled state
device dns.psi.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.psi.all: link is not ready
eth0: renamed from vethVCEJXX
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.psi.all: link becomes ready
br0: port 8(dns.psi.all) entered blocking state
br0: port 8(dns.psi.all) entered forwarding state
br0: port 36(meek.amz) entered disabled state
br0: port 36(meek.amz) entered disabled state
device meek.amz left promiscuous mode
br0: port 36(meek.amz) entered disabled state
br0: port 36(meek.amz) entered blocking state
br0: port 36(meek.amz) entered disabled state
device meek.amz entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): meek.amz: link is not ready
eth0: renamed from vethOKKWMN
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): meek.amz: link becomes ready
br0: port 36(meek.amz) entered blocking state
br0: port 36(meek.amz) entered forwarding state
br0: port 37(meek.azr) entered disabled state
br0: port 37(meek.azr) entered disabled state
device meek.azr left promiscuous mode
br0: port 37(meek.azr) entered disabled state
br0: port 37(meek.azr) entered blocking state
br0: port 37(meek.azr) entered disabled state
device meek.azr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): meek.azr: link is not ready
eth0: renamed from vethNC2ATR
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): meek.azr: link becomes ready
br0: port 37(meek.azr) entered blocking state
br0: port 37(meek.azr) entered forwarding state
br0: port 15(meek.gae) entered disabled state
br0: port 15(meek.gae) entered disabled state
device meek.gae left promiscuous mode
br0: port 15(meek.gae) entered disabled state
br0: port 15(meek.gae) entered blocking state
br0: port 15(meek.gae) entered disabled state
device meek.gae entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): meek.gae: link is not ready
eth0: renamed from vethK4BRAN
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): meek.gae: link becomes ready
br0: port 15(meek.gae) entered blocking state
br0: port 15(meek.gae) entered forwarding state
br0: port 75(wkp) entered disabled state
br0: port 75(wkp) entered disabled state
device wkp left promiscuous mode
br0: port 75(wkp) entered disabled state
br0: port 75(wkp) entered blocking state
br0: port 75(wkp) entered disabled state
device wkp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): wkp: link is not ready
br0: port 75(wkp) entered blocking state
br0: port 75(wkp) entered forwarding state
br0: port 75(wkp) entered disabled state
eth0: renamed from veth6F79KE
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): wkp: link becomes ready
br0: port 75(wkp) entered blocking state
br0: port 75(wkp) entered forwarding state
br0: port 58(vpg.jpu) entered disabled state
br0: port 58(vpg.jpu) entered disabled state
device vpg.jpu left promiscuous mode
br0: port 58(vpg.jpu) entered disabled state
brj: port 3(vpg.jpu.brj) entered disabled state
device vpg.jpu.brj left promiscuous mode
brj: port 3(vpg.jpu.brj) entered disabled state
br0: port 58(vpg.jpu) entered blocking state
br0: port 58(vpg.jpu) entered disabled state
device vpg.jpu entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.jpu: link is not ready
brj: port 3(vpg.jpu.brj) entered blocking state
brj: port 3(vpg.jpu.brj) entered disabled state
device vpg.jpu.brj entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.jpu.brj: link is not ready
brj: port 3(vpg.jpu.brj) entered blocking state
brj: port 3(vpg.jpu.brj) entered forwarding state
eth0: renamed from vethTR1QDY
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
brj: port 3(vpg.jpu.brj) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.jpu: link becomes ready
br0: port 58(vpg.jpu) entered blocking state
br0: port 58(vpg.jpu) entered forwarding state
eth1: renamed from vethQMV9DH
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.jpu.brj: link becomes ready
brj: port 3(vpg.jpu.brj) entered blocking state
brj: port 3(vpg.jpu.brj) entered forwarding state
br0: port 47(ovpn.allu) entered disabled state
br0: port 47(ovpn.allu) entered disabled state
device ovpn.allu left promiscuous mode
br0: port 47(ovpn.allu) entered disabled state
br0: port 47(ovpn.allu) entered blocking state
br0: port 47(ovpn.allu) entered disabled state
device ovpn.allu entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.allu: link is not ready
eth0: renamed from vethL0M9S4
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.allu: link becomes ready
br0: port 47(ovpn.allu) entered blocking state
br0: port 47(ovpn.allu) entered forwarding state
br0: port 68(vpg.usu) entered disabled state
br0: port 68(vpg.usu) entered disabled state
device vpg.usu left promiscuous mode
br0: port 68(vpg.usu) entered disabled state
bru: port 3(vpg.usu.bru) entered disabled state
device vpg.usu.bru left promiscuous mode
bru: port 3(vpg.usu.bru) entered disabled state
br0: port 68(vpg.usu) entered blocking state
br0: port 68(vpg.usu) entered disabled state
device vpg.usu entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.usu: link is not ready
bru: port 3(vpg.usu.bru) entered blocking state
bru: port 3(vpg.usu.bru) entered disabled state
device vpg.usu.bru entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.usu.bru: link is not ready
bru: port 3(vpg.usu.bru) entered blocking state
bru: port 3(vpg.usu.bru) entered forwarding state
bru: port 3(vpg.usu.bru) entered disabled state
eth0: renamed from vethTW1VUU
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.usu: link becomes ready
br0: port 68(vpg.usu) entered blocking state
br0: port 68(vpg.usu) entered forwarding state
eth1: renamed from vethDFQ6CX
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.usu.bru: link becomes ready
bru: port 3(vpg.usu.bru) entered blocking state
bru: port 3(vpg.usu.bru) entered forwarding state
br0: port 69(vpn.h) entered disabled state
br0: port 69(vpn.h) entered disabled state
device vpn.h left promiscuous mode
br0: port 69(vpn.h) entered disabled state
br0: port 69(vpn.h) entered blocking state
br0: port 69(vpn.h) entered disabled state
device vpn.h entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpn.h: link is not ready
eth0: renamed from veth2J0GTP
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpn.h: link becomes ready
br0: port 69(vpn.h) entered blocking state
br0: port 69(vpn.h) entered forwarding state
br0: port 54(vpg.all) entered disabled state
br0: port 54(vpg.all) entered disabled state
device vpg.all left promiscuous mode
br0: port 54(vpg.all) entered disabled state
br0: port 54(vpg.all) entered blocking state
br0: port 54(vpg.all) entered disabled state
device vpg.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.all: link is not ready
eth0: renamed from vethA7V08N
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.all: link becomes ready
br0: port 54(vpg.all) entered blocking state
br0: port 54(vpg.all) entered forwarding state
br0: port 45(gw.tor.prx) entered disabled state
br0: port 45(gw.tor.prx) entered disabled state
device gw.tor.prx left promiscuous mode
br0: port 45(gw.tor.prx) entered disabled state
br0: port 45(gw.tor.prx) entered blocking state
br0: port 45(gw.tor.prx) entered disabled state
device gw.tor.prx entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gw.tor.prx: link is not ready
eth0: renamed from vethKVQ4X3
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gw.tor.prx: link becomes ready
br0: port 45(gw.tor.prx) entered blocking state
br0: port 45(gw.tor.prx) entered forwarding state
docker0: port 1(vethe39b79a) entered disabled state
vethdb3d553: renamed from eth0
docker0: port 1(vethe39b79a) entered disabled state
device vethe39b79a left promiscuous mode
docker0: port 1(vethe39b79a) entered disabled state
br0: port 16(gitlab) entered disabled state
br0: port 16(gitlab) entered disabled state
device gitlab left promiscuous mode
br0: port 16(gitlab) entered disabled state
br0: port 16(gitlab) entered blocking state
br0: port 16(gitlab) entered disabled state
device gitlab entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gitlab: link is not ready
eth0: renamed from veth0E6OWP
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gitlab: link becomes ready
br0: port 16(gitlab) entered blocking state
br0: port 16(gitlab) entered forwarding state
docker0: port 1(veth8c83c39) entered blocking state
docker0: port 1(veth8c83c39) entered disabled state
device veth8c83c39 entered promiscuous mode
eth0: renamed from vethf005bdb
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 1(veth8c83c39) entered blocking state
docker0: port 1(veth8c83c39) entered forwarding state
br0: port 57(vpg.jps) entered disabled state
br0: port 57(vpg.jps) entered disabled state
device vpg.jps left promiscuous mode
br0: port 57(vpg.jps) entered disabled state
brjs: port 2(vpg.brjs) entered disabled state
device vpg.brjs left promiscuous mode
brjs: port 2(vpg.brjs) entered disabled state
br0: port 57(vpg.jps) entered blocking state
br0: port 57(vpg.jps) entered disabled state
device vpg.jps entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.jps: link is not ready
brjs: port 2(vpg.brjs) entered blocking state
brjs: port 2(vpg.brjs) entered disabled state
device vpg.brjs entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.brjs: link is not ready
brjs: port 2(vpg.brjs) entered blocking state
brjs: port 2(vpg.brjs) entered forwarding state
eth0: renamed from vethGM8CML
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
brjs: port 2(vpg.brjs) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.jps: link becomes ready
br0: port 57(vpg.jps) entered blocking state
br0: port 57(vpg.jps) entered forwarding state
eth1: renamed from vethP9BWOD
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.brjs: link becomes ready
brjs: port 2(vpg.brjs) entered blocking state
brjs: port 2(vpg.brjs) entered forwarding state
br0: port 60(vpg.krs) entered disabled state
br0: port 60(vpg.krs) entered disabled state
device vpg.krs left promiscuous mode
br0: port 60(vpg.krs) entered disabled state
brks: port 2(vpg.brks) entered disabled state
device vpg.brks left promiscuous mode
brks: port 2(vpg.brks) entered disabled state
br0: port 60(vpg.krs) entered blocking state
br0: port 60(vpg.krs) entered disabled state
device vpg.krs entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.krs: link is not ready
br0: port 60(vpg.krs) entered blocking state
br0: port 60(vpg.krs) entered forwarding state
brks: port 2(vpg.brks) entered blocking state
brks: port 2(vpg.brks) entered disabled state
device vpg.brks entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.brks: link is not ready
brks: port 2(vpg.brks) entered blocking state
brks: port 2(vpg.brks) entered forwarding state
br0: port 60(vpg.krs) entered disabled state
brks: port 2(vpg.brks) entered disabled state
eth0: renamed from veth1WPTAU
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.krs: link becomes ready
br0: port 60(vpg.krs) entered blocking state
br0: port 60(vpg.krs) entered forwarding state
eth1: renamed from vethPLO2SB
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.brks: link becomes ready
brks: port 2(vpg.brks) entered blocking state
brks: port 2(vpg.brks) entered forwarding state
br0: port 81(smb) entered disabled state
br0: port 81(smb) entered disabled state
device smb left promiscuous mode
br0: port 81(smb) entered disabled state
br0: port 81(smb) entered blocking state
br0: port 81(smb) entered disabled state
device smb entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): smb: link is not ready
eth0: renamed from veth6MX2KT
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): smb: link becomes ready
br0: port 81(smb) entered blocking state
br0: port 81(smb) entered forwarding state
br0: port 61(vpg.kru) entered disabled state
br0: port 61(vpg.kru) entered disabled state
device vpg.kru left promiscuous mode
br0: port 61(vpg.kru) entered disabled state
brk: port 3(vpg.kru.brk) entered disabled state
device vpg.kru.brk left promiscuous mode
brk: port 3(vpg.kru.brk) entered disabled state
br0: port 61(vpg.kru) entered blocking state
br0: port 61(vpg.kru) entered disabled state
device vpg.kru entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.kru: link is not ready
br0: port 61(vpg.kru) entered blocking state
br0: port 61(vpg.kru) entered forwarding state
brk: port 3(vpg.kru.brk) entered blocking state
brk: port 3(vpg.kru.brk) entered disabled state
device vpg.kru.brk entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.kru.brk: link is not ready
brk: port 3(vpg.kru.brk) entered blocking state
brk: port 3(vpg.kru.brk) entered forwarding state
br0: port 61(vpg.kru) entered disabled state
brk: port 3(vpg.kru.brk) entered disabled state
eth0: renamed from vethCT4GDX
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.kru: link becomes ready
br0: port 61(vpg.kru) entered blocking state
br0: port 61(vpg.kru) entered forwarding state
eth1: renamed from vethN4C0L2
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.kru.brk: link becomes ready
brk: port 3(vpg.kru.brk) entered blocking state
brk: port 3(vpg.kru.brk) entered forwarding state
br0: port 67(vpg.uss) entered disabled state
br0: port 67(vpg.uss) entered disabled state
device vpg.uss left promiscuous mode
br0: port 67(vpg.uss) entered disabled state
brus: port 2(vpg.brus) entered disabled state
device vpg.brus left promiscuous mode
brus: port 2(vpg.brus) entered disabled state
br0: port 67(vpg.uss) entered blocking state
br0: port 67(vpg.uss) entered disabled state
device vpg.uss entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.uss: link is not ready
br0: port 67(vpg.uss) entered blocking state
br0: port 67(vpg.uss) entered forwarding state
brus: port 2(vpg.brus) entered blocking state
brus: port 2(vpg.brus) entered disabled state
device vpg.brus entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.brus: link is not ready
brus: port 2(vpg.brus) entered blocking state
brus: port 2(vpg.brus) entered forwarding state
br0: port 67(vpg.uss) entered disabled state
brus: port 2(vpg.brus) entered disabled state
eth0: renamed from vethHEBE9J
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
eth1: renamed from veth217JA9
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.uss: link becomes ready
br0: port 67(vpg.uss) entered blocking state
br0: port 67(vpg.uss) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.brus: link becomes ready
brus: port 2(vpg.brus) entered blocking state
brus: port 2(vpg.brus) entered forwarding state
br0: port 55(vpg.allu) entered disabled state
br0: port 55(vpg.allu) entered disabled state
device vpg.allu left promiscuous mode
br0: port 55(vpg.allu) entered disabled state
br0: port 55(vpg.allu) entered blocking state
br0: port 55(vpg.allu) entered disabled state
device vpg.allu entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.allu: link is not ready
eth0: renamed from veth2FI3E7
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.allu: link becomes ready
br0: port 55(vpg.allu) entered blocking state
br0: port 55(vpg.allu) entered forwarding state
br0: port 28(wiki) entered disabled state
br0: port 28(wiki) entered disabled state
device wiki left promiscuous mode
br0: port 28(wiki) entered disabled state
br0: port 28(wiki) entered blocking state
br0: port 28(wiki) entered disabled state
device wiki entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): wiki: link is not ready
br0: port 28(wiki) entered blocking state
br0: port 28(wiki) entered forwarding state
br0: port 28(wiki) entered disabled state
eth0: renamed from vethOP70IC
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): wiki: link becomes ready
br0: port 28(wiki) entered blocking state
br0: port 28(wiki) entered forwarding state
br0: port 26(squid) entered disabled state
br0: port 26(squid) entered disabled state
device squid left promiscuous mode
br0: port 26(squid) entered disabled state
br0: port 26(squid) entered blocking state
br0: port 26(squid) entered disabled state
device squid entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): squid: link is not ready
eth0: renamed from veth0TJNMX
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): squid: link becomes ready
br0: port 26(squid) entered blocking state
br0: port 26(squid) entered forwarding state
br0: port 80(nc) entered disabled state
device nc left promiscuous mode
br0: port 80(nc) entered disabled state
br0: port 80(nc) entered blocking state
br0: port 80(nc) entered disabled state
device nc entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): nc: link is not ready
eth0: renamed from vethGRW833
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): nc: link becomes ready
br0: port 80(nc) entered blocking state
br0: port 80(nc) entered forwarding state
audit: type=1400 audit(1529186298.888:59): apparmor="STATUS" operation="profile_replace" info="not policy admin" error=-13 profile="unconfined" pid=38818 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
docker0: port 1(veth4f3470f) entered blocking state
docker0: port 1(veth4f3470f) entered disabled state
device veth4f3470f entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth4f3470f: link is not ready
docker0: port 2(veth147afd9) entered blocking state
docker0: port 2(veth147afd9) entered disabled state
device veth147afd9 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth147afd9: link is not ready
docker0: port 2(veth147afd9) entered blocking state
docker0: port 2(veth147afd9) entered forwarding state
docker0: port 2(veth147afd9) entered disabled state
audit: type=1400 audit(1529186303.556:60): apparmor="STATUS" operation="profile_replace" info="not policy admin" error=-13 profile="unconfined" pid=40791 comm="apparmor_parser"
audit: type=1400 audit(1529186303.560:61): apparmor="STATUS" operation="profile_replace" info="not policy admin" error=-13 profile="unconfined" pid=40793 comm="apparmor_parser"
docker0: port 1(veth4f3470f) entered disabled state
device veth4f3470f left promiscuous mode
docker0: port 1(veth4f3470f) entered disabled state
docker0: port 2(veth147afd9) entered disabled state
device veth147afd9 left promiscuous mode
docker0: port 2(veth147afd9) entered disabled state
br0: port 19(gw.o) entered disabled state
br0: port 19(gw.o) entered disabled state
device gw.o left promiscuous mode
br0: port 19(gw.o) entered disabled state
br0: port 19(gw.o) entered blocking state
br0: port 19(gw.o) entered disabled state
device gw.o entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gw.o: link is not ready
eth0: renamed from vethDJRUL9
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gw.o: link becomes ready
br0: port 19(gw.o) entered blocking state
br0: port 19(gw.o) entered forwarding state
br0: port 8(dns.psi.all) entered disabled state
br0: port 8(dns.psi.all) entered disabled state
device dns.psi.all left promiscuous mode
br0: port 8(dns.psi.all) entered disabled state
br0: port 8(dns.psi.all) entered blocking state
br0: port 8(dns.psi.all) entered disabled state
device dns.psi.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.psi.all: link is not ready
eth0: renamed from vethWGHYSR
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.psi.all: link becomes ready
br0: port 8(dns.psi.all) entered blocking state
br0: port 8(dns.psi.all) entered forwarding state
br0: port 49(ovpn.jpu) entered disabled state
br0: port 49(ovpn.jpu) entered disabled state
device ovpn.jpu left promiscuous mode
br0: port 49(ovpn.jpu) entered disabled state
br0: port 49(ovpn.jpu) entered blocking state
br0: port 49(ovpn.jpu) entered disabled state
device ovpn.jpu entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.jpu: link is not ready
eth0: renamed from veth2B6B6K
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.jpu: link becomes ready
br0: port 49(ovpn.jpu) entered blocking state
br0: port 49(ovpn.jpu) entered forwarding state
br0: port 38(meek.jp) entered disabled state
br0: port 38(meek.jp) entered disabled state
device meek.jp left promiscuous mode
br0: port 38(meek.jp) entered disabled state
br0: port 38(meek.jp) entered blocking state
br0: port 38(meek.jp) entered disabled state
device meek.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): meek.jp: link is not ready
eth0: renamed from vethB9XA9O
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): meek.jp: link becomes ready
br0: port 38(meek.jp) entered blocking state
br0: port 38(meek.jp) entered forwarding state
br0: port 51(ovpn.kru) entered disabled state
br0: port 51(ovpn.kru) entered disabled state
device ovpn.kru left promiscuous mode
br0: port 51(ovpn.kru) entered disabled state
br0: port 51(ovpn.kru) entered blocking state
br0: port 51(ovpn.kru) entered disabled state
device ovpn.kru entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.kru: link is not ready
eth0: renamed from vethYMPCX3
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.kru: link becomes ready
br0: port 51(ovpn.kru) entered blocking state
br0: port 51(ovpn.kru) entered forwarding state
br0: port 53(ovpn.usu) entered disabled state
br0: port 53(ovpn.usu) entered disabled state
device ovpn.usu left promiscuous mode
br0: port 53(ovpn.usu) entered disabled state
br0: port 53(ovpn.usu) entered blocking state
br0: port 53(ovpn.usu) entered disabled state
device ovpn.usu entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.usu: link is not ready
br0: port 53(ovpn.usu) entered blocking state
br0: port 53(ovpn.usu) entered forwarding state
br0: port 53(ovpn.usu) entered disabled state
eth0: renamed from vethY1Y49E
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.usu: link becomes ready
br0: port 53(ovpn.usu) entered blocking state
br0: port 53(ovpn.usu) entered forwarding state
br0: port 39(s4.jp) entered disabled state
br0: port 39(s4.jp) entered disabled state
device s4.jp left promiscuous mode
br0: port 39(s4.jp) entered disabled state
br0: port 39(s4.jp) entered blocking state
br0: port 39(s4.jp) entered disabled state
device s4.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): s4.jp: link is not ready
br0: port 39(s4.jp) entered blocking state
br0: port 39(s4.jp) entered forwarding state
br0: port 39(s4.jp) entered disabled state
eth0: renamed from vethCAC9UY
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): s4.jp: link becomes ready
br0: port 39(s4.jp) entered blocking state
br0: port 39(s4.jp) entered forwarding state
br0: port 40(s5.all) entered disabled state
br0: port 40(s5.all) entered disabled state
device s5.all left promiscuous mode
br0: port 40(s5.all) entered disabled state
br0: port 40(s5.all) entered blocking state
br0: port 40(s5.all) entered disabled state
device s5.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): s5.all: link is not ready
eth0: renamed from vethSEXOUR
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): s5.all: link becomes ready
br0: port 40(s5.all) entered blocking state
br0: port 40(s5.all) entered forwarding state
br0: port 29(psi.k1) entered disabled state
br0: port 29(psi.k1) entered disabled state
device psi.k1 left promiscuous mode
br0: port 29(psi.k1) entered disabled state
br0: port 29(psi.k1) entered blocking state
br0: port 29(psi.k1) entered disabled state
device psi.k1 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): psi.k1: link is not ready
eth0: renamed from veth58SNWJ
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): psi.k1: link becomes ready
br0: port 29(psi.k1) entered blocking state
br0: port 29(psi.k1) entered forwarding state
br0: port 33(gw.tor) entered disabled state
br0: port 33(gw.tor) entered disabled state
device gw.tor left promiscuous mode
br0: port 33(gw.tor) entered disabled state
br0: port 33(gw.tor) entered blocking state
br0: port 33(gw.tor) entered disabled state
device gw.tor entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gw.tor: link is not ready
br0: port 33(gw.tor) entered blocking state
br0: port 33(gw.tor) entered forwarding state
br0: port 33(gw.tor) entered disabled state
eth0: renamed from veth0TSR0D
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gw.tor: link becomes ready
br0: port 33(gw.tor) entered blocking state
br0: port 33(gw.tor) entered forwarding state
br0: port 34(gw.tor.cow) entered disabled state
br0: port 34(gw.tor.cow) entered disabled state
device gw.tor.cow left promiscuous mode
br0: port 34(gw.tor.cow) entered disabled state
br0: port 34(gw.tor.cow) entered blocking state
br0: port 34(gw.tor.cow) entered disabled state
device gw.tor.cow entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gw.tor.cow: link is not ready
eth0: renamed from vethH6SN15
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gw.tor.cow: link becomes ready
br0: port 34(gw.tor.cow) entered blocking state
br0: port 34(gw.tor.cow) entered forwarding state
br0: port 21(http) entered disabled state
br0: port 21(http) entered disabled state
device http left promiscuous mode
br0: port 21(http) entered disabled state
br0: port 21(http) entered blocking state
br0: port 21(http) entered disabled state
device http entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): http: link is not ready
eth0: renamed from vethEU9IIW
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): http: link becomes ready
br0: port 21(http) entered blocking state
br0: port 21(http) entered forwarding state
br0: port 41(gfw.tor.all) entered disabled state
br0: port 41(gfw.tor.all) entered disabled state
device gfw.tor.all left promiscuous mode
br0: port 41(gfw.tor.all) entered disabled state
br0: port 41(gfw.tor.all) entered blocking state
br0: port 41(gfw.tor.all) entered disabled state
device gfw.tor.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gfw.tor.all: link is not ready
eth0: renamed from veth4IAV1F
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gfw.tor.all: link becomes ready
br0: port 41(gfw.tor.all) entered blocking state
br0: port 41(gfw.tor.all) entered forwarding state
br0: port 22(https) entered disabled state
br0: port 22(https) entered disabled state
device https left promiscuous mode
br0: port 22(https) entered disabled state
br0: port 22(https) entered blocking state
br0: port 22(https) entered disabled state
device https entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): https: link is not ready
eth0: renamed from veth40JCKD
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): https: link becomes ready
br0: port 22(https) entered blocking state
br0: port 22(https) entered forwarding state
br0: port 42(gfw.tor.jp) entered disabled state
br0: port 42(gfw.tor.jp) entered disabled state
device gfw.tor.jp left promiscuous mode
br0: port 42(gfw.tor.jp) entered disabled state
br0: port 42(gfw.tor.jp) entered blocking state
br0: port 42(gfw.tor.jp) entered disabled state
device gfw.tor.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gfw.tor.jp: link is not ready
eth0: renamed from vethH2V8KK
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gfw.tor.jp: link becomes ready
br0: port 42(gfw.tor.jp) entered blocking state
br0: port 42(gfw.tor.jp) entered forwarding state
br0: port 43(gfw.tor.kr) entered disabled state
br0: port 43(gfw.tor.kr) entered disabled state
device gfw.tor.kr left promiscuous mode
br0: port 43(gfw.tor.kr) entered disabled state
br0: port 43(gfw.tor.kr) entered blocking state
br0: port 43(gfw.tor.kr) entered disabled state
device gfw.tor.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gfw.tor.kr: link is not ready
br0: port 43(gfw.tor.kr) entered blocking state
br0: port 43(gfw.tor.kr) entered forwarding state
br0: port 43(gfw.tor.kr) entered disabled state
eth0: renamed from vethE82MHP
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gfw.tor.kr: link becomes ready
br0: port 43(gfw.tor.kr) entered blocking state
br0: port 43(gfw.tor.kr) entered forwarding state
br0: port 23(m.h) entered disabled state
br0: port 23(m.h) entered disabled state
device m.h left promiscuous mode
br0: port 23(m.h) entered disabled state
br0: port 23(m.h) entered blocking state
br0: port 23(m.h) entered disabled state
device m.h entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): m.h: link is not ready
eth0: renamed from veth7VHK40
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): m.h: link becomes ready
br0: port 23(m.h) entered blocking state
br0: port 23(m.h) entered forwarding state
br0: port 8(dns.psi.all) entered disabled state
br0: port 8(dns.psi.all) entered disabled state
device dns.psi.all left promiscuous mode
br0: port 8(dns.psi.all) entered disabled state
br0: port 8(dns.psi.all) entered blocking state
br0: port 8(dns.psi.all) entered disabled state
device dns.psi.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.psi.all: link is not ready
eth0: renamed from vethG3H9JW
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.psi.all: link becomes ready
br0: port 8(dns.psi.all) entered blocking state
br0: port 8(dns.psi.all) entered forwarding state
br0: port 44(gfw.tor.us) entered disabled state
br0: port 44(gfw.tor.us) entered disabled state
device gfw.tor.us left promiscuous mode
br0: port 44(gfw.tor.us) entered disabled state
br0: port 44(gfw.tor.us) entered blocking state
br0: port 44(gfw.tor.us) entered disabled state
device gfw.tor.us entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gfw.tor.us: link is not ready
eth0: renamed from vethJ7EW3C
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gfw.tor.us: link becomes ready
br0: port 44(gfw.tor.us) entered blocking state
br0: port 44(gfw.tor.us) entered forwarding state
audit: type=1400 audit(1529219046.006:62): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=29843 comm="mount" flags="rw, remount"
audit: type=1400 audit(1529219046.006:63): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/dev/shm/" pid=29845 comm="mount" flags="rw, nosuid, nodev, remount"
audit: type=1400 audit(1529219046.294:64): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=30298 comm="(tor)" flags="rw, rslave"
audit: type=1400 audit(1529219046.610:65): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=30487 comm="(tor)" flags="rw, rslave"
br0: port 24(mm) entered disabled state
br0: port 24(mm) entered disabled state
device mm left promiscuous mode
br0: port 24(mm) entered disabled state
br0: port 24(mm) entered blocking state
br0: port 24(mm) entered disabled state
device mm entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): mm: link is not ready
br0: port 24(mm) entered blocking state
br0: port 24(mm) entered forwarding state
br0: port 24(mm) entered disabled state
eth0: renamed from veth57FTTW
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): mm: link becomes ready
br0: port 24(mm) entered blocking state
br0: port 24(mm) entered forwarding state
br0: port 105(bionic.dvlp) entered blocking state
br0: port 105(bionic.dvlp) entered disabled state
device bionic.dvlp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): bionic.dvlp: link is not ready
eth0: renamed from veth4CXQ5O
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): bionic.dvlp: link becomes ready
br0: port 105(bionic.dvlp) entered blocking state
br0: port 105(bionic.dvlp) entered forwarding state
audit: type=1400 audit(1529224589.606:66): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/fs/cgroup/unified/" pid=29262 comm="systemd" fstype="cgroup2" srcname="cgroup" flags="rw, nosuid, nodev, noexec"
audit: type=1400 audit(1529224589.606:67): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/fs/cgroup/unified/" pid=29262 comm="systemd" fstype="cgroup2" srcname="cgroup" flags="rw, nosuid, nodev, noexec"
br0: port 1(eth0) entered blocking state
br0: port 1(eth0) entered disabled state
device eth0 entered promiscuous mode
br0: port 1(eth0) entered blocking state
br0: port 1(eth0) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
audit: type=1400 audit(1529224591.469:68): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=31375 comm="(resolved)" flags="rw, rslave"
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
br0: port 18(gw.f) entered disabled state
br0: port 18(gw.f) entered disabled state
device gw.f left promiscuous mode
br0: port 18(gw.f) entered disabled state
br0: port 18(gw.f) entered blocking state
br0: port 18(gw.f) entered disabled state
device gw.f entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gw.f: link is not ready
eth0: renamed from vethMMCHTW
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gw.f: link becomes ready
br0: port 18(gw.f) entered blocking state
br0: port 18(gw.f) entered forwarding state
br0: port 17(gw.cow) entered disabled state
br0: port 17(gw.cow) entered disabled state
device gw.cow left promiscuous mode
br0: port 17(gw.cow) entered disabled state
br0: port 17(gw.cow) entered blocking state
br0: port 17(gw.cow) entered disabled state
device gw.cow entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): gw.cow: link is not ready
eth0: renamed from vethQ70H64
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): gw.cow: link becomes ready
br0: port 17(gw.cow) entered blocking state
br0: port 17(gw.cow) entered forwarding state
br0: port 7(dns.psi.a1) entered disabled state
br0: port 7(dns.psi.a1) entered disabled state
device dns.psi.a1 left promiscuous mode
br0: port 7(dns.psi.a1) entered disabled state
br0: port 7(dns.psi.a1) entered blocking state
br0: port 7(dns.psi.a1) entered disabled state
device dns.psi.a1 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.psi.a1: link is not ready
eth0: renamed from vethP0N266
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.psi.a1: link becomes ready
br0: port 7(dns.psi.a1) entered blocking state
br0: port 7(dns.psi.a1) entered forwarding state
br0: port 11(dns.wj.all) entered disabled state
br0: port 11(dns.wj.all) entered disabled state
device dns.wj.all left promiscuous mode
br0: port 11(dns.wj.all) entered disabled state
br0: port 11(dns.wj.all) entered blocking state
br0: port 11(dns.wj.all) entered disabled state
device dns.wj.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.wj.all: link is not ready
eth0: renamed from veth6RYHFG
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.wj.all: link becomes ready
br0: port 11(dns.wj.all) entered blocking state
br0: port 11(dns.wj.all) entered forwarding state
audit: type=1400 audit(1529228464.339:69): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=22178 comm="mount" flags="rw, remount"
audit: type=1400 audit(1529228464.339:70): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/dev/shm/" pid=22180 comm="mount" flags="rw, nosuid, nodev, remount"
br0: port 32(wj.jp) entered disabled state
br0: port 32(wj.jp) entered disabled state
device wj.jp left promiscuous mode
br0: port 32(wj.jp) entered disabled state
br0: port 32(wj.jp) entered blocking state
br0: port 32(wj.jp) entered disabled state
device wj.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): wj.jp: link is not ready
eth0: renamed from vethV8V9XS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): wj.jp: link becomes ready
br0: port 32(wj.jp) entered blocking state
br0: port 32(wj.jp) entered forwarding state
br0: port 83(doc.asdk) entered disabled state
br0: port 83(doc.asdk) entered disabled state
device doc.asdk left promiscuous mode
br0: port 83(doc.asdk) entered disabled state
br0: port 83(doc.asdk) entered blocking state
br0: port 83(doc.asdk) entered disabled state
device doc.asdk entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): doc.asdk: link is not ready
eth0: renamed from vethGRWWLJ
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): doc.asdk: link becomes ready
br0: port 83(doc.asdk) entered blocking state
br0: port 83(doc.asdk) entered forwarding state
br0: port 46(ovpn.all) entered disabled state
br0: port 46(ovpn.all) entered disabled state
device ovpn.all left promiscuous mode
br0: port 46(ovpn.all) entered disabled state
br0: port 46(ovpn.all) entered blocking state
br0: port 46(ovpn.all) entered disabled state
device ovpn.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.all: link is not ready
eth0: renamed from vethKQP7GS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.all: link becomes ready
br0: port 46(ovpn.all) entered blocking state
br0: port 46(ovpn.all) entered forwarding state
br0: port 31(psi.kr) entered disabled state
br0: port 30(psi.meek) entered disabled state
br0: port 30(psi.meek) entered disabled state
device psi.meek left promiscuous mode
br0: port 30(psi.meek) entered disabled state
br0: port 31(psi.kr) entered disabled state
device psi.kr left promiscuous mode
br0: port 31(psi.kr) entered disabled state
br0: port 30(psi.meek) entered blocking state
br0: port 30(psi.meek) entered disabled state
device psi.meek entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): psi.meek: link is not ready
br0: port 30(psi.meek) entered blocking state
br0: port 30(psi.meek) entered forwarding state
br0: port 30(psi.meek) entered disabled state
br0: port 31(psi.kr) entered blocking state
br0: port 31(psi.kr) entered disabled state
device psi.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): psi.kr: link is not ready
br0: port 31(psi.kr) entered blocking state
br0: port 31(psi.kr) entered forwarding state
eth0: renamed from vethC7NEVG
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
br0: port 31(psi.kr) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): psi.meek: link becomes ready
br0: port 30(psi.meek) entered blocking state
br0: port 30(psi.meek) entered forwarding state
eth0: renamed from vethEXF19O
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): psi.kr: link becomes ready
br0: port 31(psi.kr) entered blocking state
br0: port 31(psi.kr) entered forwarding state
br0: port 48(ovpn.jp) entered disabled state
br0: port 48(ovpn.jp) entered disabled state
device ovpn.jp left promiscuous mode
br0: port 48(ovpn.jp) entered disabled state
br0: port 48(ovpn.jp) entered blocking state
br0: port 48(ovpn.jp) entered disabled state
device ovpn.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.jp: link is not ready
eth0: renamed from vethMPI2BT
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.jp: link becomes ready
br0: port 48(ovpn.jp) entered blocking state
br0: port 48(ovpn.jp) entered forwarding state
br0: port 87(dd) entered disabled state
br0: port 87(dd) entered disabled state
device dd left promiscuous mode
br0: port 87(dd) entered disabled state
br0: port 87(dd) entered blocking state
br0: port 87(dd) entered disabled state
device dd entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dd: link is not ready
eth0: renamed from veth5KJ50X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dd: link becomes ready
br0: port 87(dd) entered blocking state
br0: port 87(dd) entered forwarding state
audit: type=1400 audit(1529233687.599:71): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=3107 comm="mount" flags="rw, remount"
audit: type=1400 audit(1529233687.599:72): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/dev/shm/" pid=3108 comm="mount" flags="rw, nosuid, nodev, remount"
br0: port 50(ovpn.kr) entered disabled state
br0: port 50(ovpn.kr) entered disabled state
device ovpn.kr left promiscuous mode
br0: port 50(ovpn.kr) entered disabled state
br0: port 50(ovpn.kr) entered blocking state
br0: port 50(ovpn.kr) entered disabled state
device ovpn.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.kr: link is not ready
eth0: renamed from vethETFFAX
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.kr: link becomes ready
br0: port 50(ovpn.kr) entered blocking state
br0: port 50(ovpn.kr) entered forwarding state
br0: port 52(ovpn.us) entered disabled state
br0: port 52(ovpn.us) entered disabled state
device ovpn.us left promiscuous mode
br0: port 52(ovpn.us) entered disabled state
br0: port 52(ovpn.us) entered blocking state
br0: port 52(ovpn.us) entered disabled state
device ovpn.us entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): ovpn.us: link is not ready
eth0: renamed from vethN9K53H
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): ovpn.us: link becomes ready
br0: port 52(ovpn.us) entered blocking state
br0: port 52(ovpn.us) entered forwarding state
br0: port 56(vpg.jp) entered disabled state
br0: port 56(vpg.jp) entered disabled state
device vpg.jp left promiscuous mode
br0: port 56(vpg.jp) entered disabled state
brj: port 2(vpg.jp.brj) entered disabled state
device vpg.jp.brj left promiscuous mode
brj: port 2(vpg.jp.brj) entered disabled state
br0: port 56(vpg.jp) entered blocking state
br0: port 56(vpg.jp) entered disabled state
device vpg.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.jp: link is not ready
br0: port 56(vpg.jp) entered blocking state
br0: port 56(vpg.jp) entered forwarding state
brj: port 2(vpg.jp.brj) entered blocking state
brj: port 2(vpg.jp.brj) entered disabled state
device vpg.jp.brj entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.jp.brj: link is not ready
brj: port 2(vpg.jp.brj) entered blocking state
brj: port 2(vpg.jp.brj) entered forwarding state
br0: port 56(vpg.jp) entered disabled state
brj: port 2(vpg.jp.brj) entered disabled state
eth0: renamed from vethKCEMMW
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
eth1: renamed from veth6TGOMA
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.jp: link becomes ready
br0: port 56(vpg.jp) entered blocking state
br0: port 56(vpg.jp) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.jp.brj: link becomes ready
brj: port 2(vpg.jp.brj) entered blocking state
brj: port 2(vpg.jp.brj) entered forwarding state
br0: port 59(vpg.kr) entered disabled state
br0: port 59(vpg.kr) entered disabled state
device vpg.kr left promiscuous mode
br0: port 59(vpg.kr) entered disabled state
brk: port 2(vpg.kr.brk) entered disabled state
device vpg.kr.brk left promiscuous mode
brk: port 2(vpg.kr.brk) entered disabled state
br0: port 59(vpg.kr) entered blocking state
br0: port 59(vpg.kr) entered disabled state
device vpg.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.kr: link is not ready
br0: port 59(vpg.kr) entered blocking state
br0: port 59(vpg.kr) entered forwarding state
brk: port 2(vpg.kr.brk) entered blocking state
brk: port 2(vpg.kr.brk) entered disabled state
device vpg.kr.brk entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.kr.brk: link is not ready
brk: port 2(vpg.kr.brk) entered blocking state
brk: port 2(vpg.kr.brk) entered forwarding state
br0: port 59(vpg.kr) entered disabled state
brk: port 2(vpg.kr.brk) entered disabled state
eth0: renamed from vethP87IJ3
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.kr: link becomes ready
br0: port 59(vpg.kr) entered blocking state
br0: port 59(vpg.kr) entered forwarding state
eth1: renamed from veth273W9L
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.kr.brk: link becomes ready
brk: port 2(vpg.kr.brk) entered blocking state
brk: port 2(vpg.kr.brk) entered forwarding state
br0: port 62(vpg.prx.all) entered disabled state
br0: port 62(vpg.prx.all) entered disabled state
device vpg.prx.all left promiscuous mode
br0: port 62(vpg.prx.all) entered disabled state
br0: port 62(vpg.prx.all) entered blocking state
br0: port 62(vpg.prx.all) entered disabled state
device vpg.prx.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.prx.all: link is not ready
eth0: renamed from vethLYL4RK
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.prx.all: link becomes ready
br0: port 62(vpg.prx.all) entered blocking state
br0: port 62(vpg.prx.all) entered forwarding state
audit: type=1400 audit(1529238966.772:73): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/dev/shm/" pid=14874 comm="mount" flags="rw, nosuid, nodev, remount"
audit: type=1400 audit(1529238966.772:74): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=14873 comm="mount" flags="rw, remount"
br0: port 63(vpg.prx.jp) entered disabled state
br0: port 63(vpg.prx.jp) entered disabled state
device vpg.prx.jp left promiscuous mode
br0: port 63(vpg.prx.jp) entered disabled state
br0: port 63(vpg.prx.jp) entered blocking state
br0: port 63(vpg.prx.jp) entered disabled state
device vpg.prx.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.prx.jp: link is not ready
br0: port 63(vpg.prx.jp) entered blocking state
br0: port 63(vpg.prx.jp) entered forwarding state
br0: port 63(vpg.prx.jp) entered disabled state
eth0: renamed from veth8DPDJC
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.prx.jp: link becomes ready
br0: port 63(vpg.prx.jp) entered blocking state
br0: port 63(vpg.prx.jp) entered forwarding state
br0: port 64(vpg.prx.kr) entered disabled state
br0: port 64(vpg.prx.kr) entered disabled state
device vpg.prx.kr left promiscuous mode
br0: port 64(vpg.prx.kr) entered disabled state
br0: port 64(vpg.prx.kr) entered blocking state
br0: port 64(vpg.prx.kr) entered disabled state
device vpg.prx.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.prx.kr: link is not ready
eth0: renamed from vethK85267
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.prx.kr: link becomes ready
br0: port 64(vpg.prx.kr) entered blocking state
br0: port 64(vpg.prx.kr) entered forwarding state
br0: port 65(vpg.prx.us) entered disabled state
br0: port 65(vpg.prx.us) entered disabled state
device vpg.prx.us left promiscuous mode
br0: port 65(vpg.prx.us) entered disabled state
br0: port 65(vpg.prx.us) entered blocking state
br0: port 65(vpg.prx.us) entered disabled state
device vpg.prx.us entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.prx.us: link is not ready
br0: port 65(vpg.prx.us) entered blocking state
br0: port 65(vpg.prx.us) entered forwarding state
br0: port 65(vpg.prx.us) entered disabled state
eth0: renamed from vethA796FV
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.prx.us: link becomes ready
br0: port 65(vpg.prx.us) entered blocking state
br0: port 65(vpg.prx.us) entered forwarding state
docker0: port 1(vethc716e48) entered disabled state
vethda40730: renamed from eth0
docker0: port 1(vethc716e48) entered disabled state
device vethc716e48 left promiscuous mode
docker0: port 1(vethc716e48) entered disabled state
br0: port 76(docker.mirror) entered disabled state
br0: port 76(docker.mirror) entered disabled state
device docker.mirror left promiscuous mode
br0: port 76(docker.mirror) entered disabled state
br0: port 76(docker.mirror) entered blocking state
br0: port 76(docker.mirror) entered disabled state
device docker.mirror entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): docker.mirror: link is not ready
br0: port 76(docker.mirror) entered blocking state
br0: port 76(docker.mirror) entered forwarding state
br0: port 76(docker.mirror) entered disabled state
eth0: renamed from vethIUEXMF
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): docker.mirror: link becomes ready
br0: port 76(docker.mirror) entered blocking state
br0: port 76(docker.mirror) entered forwarding state
docker0: port 1(veth94c3fe5) entered blocking state
docker0: port 1(veth94c3fe5) entered disabled state
device veth94c3fe5 entered promiscuous mode
docker0: port 1(veth94c3fe5) entered blocking state
docker0: port 1(veth94c3fe5) entered forwarding state
docker0: port 1(veth94c3fe5) entered disabled state
eth0: renamed from vethc856e6c
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 1(veth94c3fe5) entered blocking state
docker0: port 1(veth94c3fe5) entered forwarding state
br0: port 66(vpg.us) entered disabled state
br0: port 66(vpg.us) entered disabled state
device vpg.us left promiscuous mode
br0: port 66(vpg.us) entered disabled state
bru: port 2(vpg.us.bru) entered disabled state
device vpg.us.bru left promiscuous mode
bru: port 2(vpg.us.bru) entered disabled state
br0: port 66(vpg.us) entered blocking state
br0: port 66(vpg.us) entered disabled state
device vpg.us entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.us: link is not ready
br0: port 66(vpg.us) entered blocking state
br0: port 66(vpg.us) entered forwarding state
bru: port 2(vpg.us.bru) entered blocking state
bru: port 2(vpg.us.bru) entered disabled state
device vpg.us.bru entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpg.us.bru: link is not ready
bru: port 2(vpg.us.bru) entered blocking state
bru: port 2(vpg.us.bru) entered forwarding state
br0: port 66(vpg.us) entered disabled state
bru: port 2(vpg.us.bru) entered disabled state
eth0: renamed from vethU3V3WT
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.us: link becomes ready
br0: port 66(vpg.us) entered blocking state
br0: port 66(vpg.us) entered forwarding state
eth1: renamed from veth5TPPMD
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpg.us.bru: link becomes ready
bru: port 2(vpg.us.bru) entered blocking state
bru: port 2(vpg.us.bru) entered forwarding state
br0: port 8(dns.psi.all) entered disabled state
br0: port 8(dns.psi.all) entered disabled state
device dns.psi.all left promiscuous mode
br0: port 8(dns.psi.all) entered disabled state
br0: port 8(dns.psi.all) entered blocking state
br0: port 8(dns.psi.all) entered disabled state
device dns.psi.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dns.psi.all: link is not ready
eth0: renamed from vethIDSREG
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dns.psi.all: link becomes ready
br0: port 8(dns.psi.all) entered blocking state
br0: port 8(dns.psi.all) entered forwarding state
docker0: port 1(veth6428d4f) entered disabled state
veth873d8f3: renamed from eth0
docker0: port 1(veth6428d4f) entered disabled state
device veth6428d4f left promiscuous mode
docker0: port 1(veth6428d4f) entered disabled state
br0: port 77(docker.registry) entered disabled state
br0: port 77(docker.registry) entered disabled state
device docker.registry left promiscuous mode
br0: port 77(docker.registry) entered disabled state
br0: port 77(docker.registry) entered blocking state
br0: port 77(docker.registry) entered disabled state
device docker.registry entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): docker.registry: link is not ready
eth0: renamed from vethGFW4DJ
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): docker.registry: link becomes ready
br0: port 77(docker.registry) entered blocking state
br0: port 77(docker.registry) entered forwarding state
docker0: port 1(vethc0b9ced) entered blocking state
docker0: port 1(vethc0b9ced) entered disabled state
device vethc0b9ced entered promiscuous mode
docker0: port 1(vethc0b9ced) entered blocking state
docker0: port 1(vethc0b9ced) entered forwarding state
docker0: port 1(vethc0b9ced) entered disabled state
eth0: renamed from veth2850b63
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 1(vethc0b9ced) entered blocking state
docker0: port 1(vethc0b9ced) entered forwarding state
br0: port 70(vpn.all) entered disabled state
br0: port 70(vpn.all) entered disabled state
device vpn.all left promiscuous mode
br0: port 70(vpn.all) entered disabled state
br0: port 70(vpn.all) entered blocking state
br0: port 70(vpn.all) entered disabled state
device vpn.all entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpn.all: link is not ready
eth0: renamed from vethKML92Y
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpn.all: link becomes ready
br0: port 70(vpn.all) entered blocking state
br0: port 70(vpn.all) entered forwarding state
br0: port 71(vpn.jp) entered disabled state
br0: port 71(vpn.jp) entered disabled state
device vpn.jp left promiscuous mode
br0: port 71(vpn.jp) entered disabled state
br0: port 71(vpn.jp) entered blocking state
br0: port 71(vpn.jp) entered disabled state
device vpn.jp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpn.jp: link is not ready
eth0: renamed from vethM23YB4
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpn.jp: link becomes ready
br0: port 71(vpn.jp) entered blocking state
br0: port 71(vpn.jp) entered forwarding state
br0: port 72(vpn.kr) entered disabled state
br0: port 72(vpn.kr) entered disabled state
device vpn.kr left promiscuous mode
br0: port 72(vpn.kr) entered disabled state
br0: port 72(vpn.kr) entered blocking state
br0: port 72(vpn.kr) entered disabled state
device vpn.kr entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpn.kr: link is not ready
eth0: renamed from vethE16PPE
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpn.kr: link becomes ready
br0: port 72(vpn.kr) entered blocking state
br0: port 72(vpn.kr) entered forwarding state
br0: port 73(vpn.us) entered disabled state
br0: port 73(vpn.us) entered disabled state
device vpn.us left promiscuous mode
br0: port 73(vpn.us) entered disabled state
br0: port 73(vpn.us) entered blocking state
br0: port 73(vpn.us) entered disabled state
device vpn.us entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpn.us: link is not ready
br0: port 73(vpn.us) entered blocking state
br0: port 73(vpn.us) entered forwarding state
br0: port 73(vpn.us) entered disabled state
eth0: renamed from veth9D91L5
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vpn.us: link becomes ready
br0: port 73(vpn.us) entered blocking state
br0: port 73(vpn.us) entered forwarding state
br0: port 106(stretch.dvlp) entered blocking state
br0: port 106(stretch.dvlp) entered disabled state
device stretch.dvlp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): stretch.dvlp: link is not ready
eth0: renamed from veth59PHYL
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): stretch.dvlp: link becomes ready
br0: port 106(stretch.dvlp) entered blocking state
br0: port 106(stretch.dvlp) entered forwarding state
br0: port 1(eth0) entered blocking state
br0: port 1(eth0) entered disabled state
device eth0 entered promiscuous mode
br0: port 1(eth0) entered blocking state
br0: port 1(eth0) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
audit: type=1400 audit(1529249944.581:75): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=15351 comm="(ionclean)" flags="rw, rslave"
igb 0000:04:00.0 enp4s0f0: igb: enp4s0f0 NIC Link is Down
br0: port 1(enp4s0f0) entered disabled state
brv4: port 1(enp4s0f0.4) entered disabled state
brv66: port 1(enp4s0f0.66) entered disabled state
brj: port 1(enp4s0f0.100) entered disabled state
brk: port 1(enp4s0f0.101) entered disabled state
bru: port 1(enp4s0f0.102) entered disabled state
brjs: port 1(enp4s0f0.103) entered disabled state
brks: port 1(enp4s0f0.104) entered disabled state
brus: port 1(enp4s0f0.105) entered disabled state
igb 0000:04:00.0 enp4s0f0: igb: enp4s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
br0: port 1(enp4s0f0) entered blocking state
br0: port 1(enp4s0f0) entered forwarding state
brv4: port 1(enp4s0f0.4) entered blocking state
brv4: port 1(enp4s0f0.4) entered forwarding state
brv66: port 1(enp4s0f0.66) entered blocking state
brv66: port 1(enp4s0f0.66) entered forwarding state
brj: port 1(enp4s0f0.100) entered blocking state
brj: port 1(enp4s0f0.100) entered forwarding state
brk: port 1(enp4s0f0.101) entered blocking state
brk: port 1(enp4s0f0.101) entered forwarding state
bru: port 1(enp4s0f0.102) entered blocking state
bru: port 1(enp4s0f0.102) entered forwarding state
brjs: port 1(enp4s0f0.103) entered blocking state
brjs: port 1(enp4s0f0.103) entered forwarding state
brks: port 1(enp4s0f0.104) entered blocking state
brks: port 1(enp4s0f0.104) entered forwarding state
brus: port 1(enp4s0f0.105) entered blocking state
brus: port 1(enp4s0f0.105) entered forwarding state
igb 0000:04:00.0 enp4s0f0: igb: enp4s0f0 NIC Link is Down
br0: port 1(enp4s0f0) entered disabled state
brv4: port 1(enp4s0f0.4) entered disabled state
brv66: port 1(enp4s0f0.66) entered disabled state
brj: port 1(enp4s0f0.100) entered disabled state
brk: port 1(enp4s0f0.101) entered disabled state
bru: port 1(enp4s0f0.102) entered disabled state
brjs: port 1(enp4s0f0.103) entered disabled state
brks: port 1(enp4s0f0.104) entered disabled state
brus: port 1(enp4s0f0.105) entered disabled state
igb 0000:04:00.0 enp4s0f0: igb: enp4s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
br0: port 1(enp4s0f0) entered blocking state
br0: port 1(enp4s0f0) entered forwarding state
brv4: port 1(enp4s0f0.4) entered blocking state
brv4: port 1(enp4s0f0.4) entered forwarding state
brv66: port 1(enp4s0f0.66) entered blocking state
brv66: port 1(enp4s0f0.66) entered forwarding state
brj: port 1(enp4s0f0.100) entered blocking state
brj: port 1(enp4s0f0.100) entered forwarding state
brk: port 1(enp4s0f0.101) entered blocking state
brk: port 1(enp4s0f0.101) entered forwarding state
bru: port 1(enp4s0f0.102) entered blocking state
bru: port 1(enp4s0f0.102) entered forwarding state
brjs: port 1(enp4s0f0.103) entered blocking state
brjs: port 1(enp4s0f0.103) entered forwarding state
brks: port 1(enp4s0f0.104) entered blocking state
brks: port 1(enp4s0f0.104) entered forwarding state
brus: port 1(enp4s0f0.105) entered blocking state
brus: port 1(enp4s0f0.105) entered forwarding state
audit: type=1400 audit(1529251744.584:76): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=12063 comm="(ionclean)" flags="rw, rslave"
br0: port 1(eth0) entered disabled state
br0: port 105(bionic.dvlp) entered disabled state
device eth0 left promiscuous mode
br0: port 1(eth0) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
br0: port 105(bionic.dvlp) entered disabled state
device bionic.dvlp left promiscuous mode
br0: port 105(bionic.dvlp) entered disabled state
br0: port 105(bionic.dvlp) entered blocking state
br0: port 105(bionic.dvlp) entered disabled state
device bionic.dvlp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): bionic.dvlp: link is not ready
eth0: renamed from vethE79G4I
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): bionic.dvlp: link becomes ready
br0: port 105(bionic.dvlp) entered blocking state
br0: port 105(bionic.dvlp) entered forwarding state
audit: type=1400 audit(1529252547.296:77): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/fs/cgroup/unified/" pid=36743 comm="systemd" fstype="cgroup2" srcname="cgroup" flags="rw, nosuid, nodev, noexec"
audit: type=1400 audit(1529252547.296:78): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/fs/cgroup/unified/" pid=36743 comm="systemd" fstype="cgroup2" srcname="cgroup" flags="rw, nosuid, nodev, noexec"
audit: type=1400 audit(1529252547.440:79): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=37139 comm="(resolved)" flags="rw, rslave"
br0: port 1(eth0) entered blocking state
br0: port 1(eth0) entered disabled state
device eth0 entered promiscuous mode
br0: port 1(eth0) entered blocking state
br0: port 1(eth0) entered forwarding state
br0: port 13(dt) entered disabled state
br0: port 13(dt) entered disabled state
device dt left promiscuous mode
br0: port 13(dt) entered disabled state
br0: port 13(dt) entered blocking state
br0: port 13(dt) entered disabled state
device dt entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): dt: link is not ready
eth0: renamed from vethVPPB32
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): dt: link becomes ready
br0: port 13(dt) entered blocking state
br0: port 13(dt) entered forwarding state
br0: port 1(eth0) entered disabled state
br0: port 105(bionic.dvlp) entered disabled state
device eth0 left promiscuous mode
br0: port 1(eth0) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
br0: port 105(bionic.dvlp) entered disabled state
device bionic.dvlp left promiscuous mode
br0: port 105(bionic.dvlp) entered disabled state
br0: port 105(bionic.dvlp) entered blocking state
br0: port 105(bionic.dvlp) entered disabled state
device bionic.dvlp entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): bionic.dvlp: link is not ready
br0: port 105(bionic.dvlp) entered blocking state
br0: port 105(bionic.dvlp) entered forwarding state
br0: port 105(bionic.dvlp) entered disabled state
eth0: renamed from vethE5UWJL
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): bionic.dvlp: link becomes ready
br0: port 105(bionic.dvlp) entered blocking state
br0: port 105(bionic.dvlp) entered forwarding state
audit: type=1400 audit(1529252776.254:80): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/fs/cgroup/unified/" pid=30635 comm="systemd" fstype="cgroup2" srcname="cgroup" flags="rw, nosuid, nodev, noexec"
audit: type=1400 audit(1529252776.254:81): apparmor="DENIED" operation="mount" info="failed type match" error=-13 profile="lxc-container-default-cgns" name="/sys/fs/cgroup/unified/" pid=30635 comm="systemd" fstype="cgroup2" srcname="cgroup" flags="rw, nosuid, nodev, noexec"
audit: type=1400 audit(1529252776.342:82): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxc-container-default-cgns" name="/" pid=31079 comm="(resolved)" flags="rw, rslave"
br0: port 1(eth0) entered blocking state
br0: port 1(eth0) entered disabled state
device eth0 entered promiscuous mode
br0: port 1(eth0) entered blocking state
br0: port 1(eth0) entered forwarding state