dmesg - new
microcode: microcode updated early to revision 0x3c, date = 2018-01-19
random: get_random_bytes called from start_kernel+0x42/0x504 with crng_init=0
Linux version 4.13.0-26-generic (buildd@lgw01-amd64-031) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5)) #29~16.04.2-Ubuntu SMP Tue Jan 9 22:00:44 UTC 2018 (Ubuntu 4.13.0-26.29~16.04.2-generic 4.13.13)
Command line: BOOT_IMAGE=/vmlinuz-4.13.0-26-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000005abd1fff] usable
BIOS-e820: [mem 0x000000005abd2000-0x000000005b92ffff] reserved
BIOS-e820: [mem 0x000000005b930000-0x000000005bbabfff] usable
BIOS-e820: [mem 0x000000005bbac000-0x000000005c77cfff] ACPI NVS
BIOS-e820: [mem 0x000000005c77d000-0x000000005cf54fff] reserved
BIOS-e820: [mem 0x000000005cf55000-0x000000005cfaafff] type 20
BIOS-e820: [mem 0x000000005cfab000-0x000000005cfabfff] usable
BIOS-e820: [mem 0x000000005cfac000-0x000000005d031fff] reserved
BIOS-e820: [mem 0x000000005d032000-0x000000005d287fff] usable
BIOS-e820: [mem 0x000000005d288000-0x000000005dff8fff] reserved
BIOS-e820: [mem 0x000000005dff9000-0x000000005dffffff] usable
BIOS-e820: [mem 0x000000005e000000-0x000000005effffff] reserved
BIOS-e820: [mem 0x0000000060000000-0x000000006fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000089fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi: ACPI=0x5bfb8000 ACPI 2.0=0x5bfb8000 SMBIOS=0xf05b0 MPS=0xfd110
random: fast init done
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X99 Extreme6, BIOS P3.20 06/01/2016
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x8a0000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 000060000000 mask 3FFFE0000000 uncachable
2 base 010000000000 mask 3FC000000000 uncachable
3 base 00005F000000 mask 3FFFFF000000 uncachable
4 base 0000F0000000 mask 3FFFF8000000 write-through
5 base 0000F8000000 mask 3FFFFE000000 write-through
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x5e000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd3a0-0x000fd3af] mapped at [ffff8a7cc00fd3a0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8a7cc0098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x85112c000, 0x85112cfff] PGTABLE
BRK [0x85112d000, 0x85112dfff] PGTABLE
BRK [0x85112e000, 0x85112efff] PGTABLE
BRK [0x85112f000, 0x85112ffff] PGTABLE
BRK [0x851130000, 0x851130fff] PGTABLE
BRK [0x851131000, 0x851131fff] PGTABLE
BRK [0x851132000, 0x851132fff] PGTABLE
BRK [0x851133000, 0x851133fff] PGTABLE
BRK [0x851134000, 0x851134fff] PGTABLE
BRK [0x851135000, 0x851135fff] PGTABLE
BRK [0x851136000, 0x851136fff] PGTABLE
BRK [0x851137000, 0x851137fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x30eac000-0x3474dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000005BFB8000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000005BFB8098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000005BFE22F0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000005BFB81D8 02A112 (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 0x000000005C77BF80 000040
ACPI: APIC 0x000000005BFE2400 000100 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000005BFE2500 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000005BFE2548 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000005BFE25E8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000005BFE2628 000495 (v01 IdeRef IdeTable 00001000 INTL 20120913)
ACPI: UEFI 0x000000005BFE2AC0 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: BDAT 0x000000005BFE2B08 000030 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: HPET 0x000000005BFE2B38 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 0x000000005BFE2B70 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SLIT 0x000000005BFE2C00 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x000000005BFE2C30 001158 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0x000000005BFE3D88 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0x000000005BFE3DC8 015E50 (v02 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: AAFT 0x000000005BFF9C18 0003BA (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: BGRT 0x000000005BFF9FD8 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: ASF! 0x000000005BFFA010 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x5fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x89fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x5fffffff] + [mem 0x100000000-0x89fffffff] -> [mem 0x00000000-0x89fffffff]
NODE_DATA(0) allocated [mem 0x89ffd2000-0x89fffcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000089fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000005abd1fff]
node 0: [mem 0x000000005b930000-0x000000005bbabfff]
node 0: [mem 0x000000005cfab000-0x000000005cfabfff]
node 0: [mem 0x000000005d032000-0x000000005d287fff]
node 0: [mem 0x000000005dff9000-0x000000005dffffff]
node 0: [mem 0x0000000100000000-0x000000089fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000089fffffff]
On node 0 totalpages: 8368203
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 5763 pages used for memmap
DMA32 zone: 368812 pages, LIFO batch:31
Normal zone: 124928 pages used for memmap
Normal zone: 7995392 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x5abd2000-0x5b92ffff]
PM: Registered nosave memory: [mem 0x5bbac000-0x5c77cfff]
PM: Registered nosave memory: [mem 0x5c77d000-0x5cf54fff]
PM: Registered nosave memory: [mem 0x5cf55000-0x5cfaafff]
PM: Registered nosave memory: [mem 0x5cfac000-0x5d031fff]
PM: Registered nosave memory: [mem 0x5d288000-0x5dff8fff]
PM: Registered nosave memory: [mem 0x5e000000-0x5effffff]
PM: Registered nosave memory: [mem 0x5f000000-0x5fffffff]
PM: Registered nosave memory: [mem 0x60000000-0x6fffffff]
PM: Registered nosave memory: [mem 0x70000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x70000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
percpu: Embedded 46 pages/cpu @ffff8a853f200000 s149784 r8192 d30440 u262144
pcpu-alloc: s149784 r8192 d30440 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8237423
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-26-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32723536K/33472812K available (12300K kernel code, 2480K rwdata, 4004K rodata, 2372K init, 2368K bss, 749276K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 37814 entries in 148 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS: 524544, nr_irqs: 928, preallocated irqs: 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3299.294 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6598.58 BogoMIPS (lpj=13197176)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 3 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 2
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz (family: 0x6, model: 0x3f, stepping: 0x2)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (79183.05 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x5bbac000-0x5c77cfff] (12390400 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 23:04:40, date: 06/03/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x60000000-0x6fffffff] (base 0x60000000)
PCI: MMCONFIG at [mem 0x60000000-0x6fffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x70000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb33d000-0xfb33dfff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:11.4: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:11.4: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:11.4: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:11.4: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:11.4: reg 0x24: [mem 0xfb33c000-0xfb33c7ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb320000-0xfb32ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb33b000-0xfb33b00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb300000-0xfb31ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb338000-0xfb338fff]
pci 0000:00:19.0: reg 0x18: [io 0xf000-0xf01f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb337000-0xfb3373ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb330000-0xfb333fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:8d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb336000-0xfb3363ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb335000-0xfb3350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:01:00.0: [10de:100c] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:01:00.1: [10de:0e1a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1969:10a1] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfb200000-0xfb23ffff 64bit]
pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:04:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfb100000-0xfb107fff 64bit]
pci 0000:04:00.0: PME# supported from D3cold
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x5abd2000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5bbac000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5cfac000-0x5fffffff]
e820: reserve RAM buffer [mem 0x5d288000-0x5fffffff]
e820: reserve RAM buffer [mem 0x5e000000-0x5fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0280-0x028f] has been reserved
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: [io 0x02a0-0x02af] has been reserved
system 00:02: [io 0x02b0-0x02bf] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 4 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x70000000-0xfbffbfff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:04: resource 1 [mem 0xfb100000-0xfb1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS mismatch (64 != 32), using 64 bytes
pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
Unpacking initramfs...
Freeing initrd memory: 57992K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x52679000-0x56679000] (64MB) mapped at [ffff8a7d12679000-ffff8a7d16678fff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1528067080.803:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:03.0: AER enabled with IRQ 25
pcieport 0000:00:03.0: Signaling PME with IRQ 25
pcieport 0000:00:1c.0: Signaling PME with IRQ 26
pcieport 0000:00:1c.2: Signaling PME with IRQ 27
pcieport 0000:00:1c.4: Signaling PME with IRQ 28
efifb: probing for efifb
pmd_set_huge: Cannot satisfy [mem 0xf9000000-0xf9200000] with a huge-page mapping due to MTRR override.
efifb: framebuffer at 0xf9000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb337000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.0-26-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb336000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.0-26-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.13.0-26-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.13.0-26-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:04:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x10000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.13.0-26-generic xhci-hcd
usb usb5: SerialNumber: 0000:04:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.13.0-26-generic xhci-hcd
usb usb6: SerialNumber: 0000:04:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
intel_rdt: Intel RDT L3 monitoring detected
RAS: Correctable Errors collector initialized.
microcode: sig=0x306f2, pf=0x4, revision=0x3c
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (942736796, 0)->(959126511, -16389715)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: b1931af2efdddab2cc28005a48cb6f00161c7d17'
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI db list
Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI dbx list
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 6:179:99
rtc_cmos 00:00: setting system clock to 2018-06-03 23:04:41 UTC (1528067081)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2372K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2024K
Freeing unused kernel memory: 92K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
ipmi message handler version 39.2
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ipmi device interface
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xd impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq led clo pio slum part ems apst
PTP clock support registered
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
nvidia: module verification failed: signature and/or required key missing - tainting kernel
alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d0:50:99:77:41:a4]
nvidia-nvlink: Nvlink Core is being initialized, major device number 243
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 396.24 Thu Apr 26 00:10:09 PDT 2018 (using threaded interrupts)
alx 0000:03:00.0 enp3s0: renamed from eth0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb33c000 port 0xfb33c100 irq 37
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfb33c000 port 0xfb33c200 irq 37
ata4: SATA max UDMA/133 abar m2048@0xfb33c000 port 0xfb33c280 irq 37
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 396.24 Wed Apr 25 23:54:18 PDT 2018
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 3-3: new high-speed USB device number 2 using xhci_hcd
usb 2-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:77:41:a6
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 enp0s25: renamed from eth0
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 3-3: New USB device found, idVendor=174c, idProduct=2074
usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 3-3: Product: ASM107x
usb 3-3: Manufacturer: ASRock
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-9: WDC WD2003FZEX-00Z4SA0, 01.01A01, max UDMA/133
ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-9: WDC WD40EZRX-00SPEB0, 80.00A80, max UDMA/133
ata4.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata1.00: ATA-9: CT250BX100SSD1, MU01, max UDMA/133
ata1.00: 488397168 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA CT250BX100SSD1 MU01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:0:0: Direct-Access ATA WDC WD2003FZEX-0 1A01 PQ: 0 ANSI: 5
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 3:0:0:0: Direct-Access ATA WDC WD40EZRX-00S 0A80 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 4-3: New USB device found, idVendor=174c, idProduct=3074
usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 4-3: Product: ASM107x
usb 4-3: Manufacturer: ASRock
hub 4-3:1.0: USB hub found
hub 4-3:1.0: 4 ports detected
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 3:0:0:0: [sdc] 4096-byte physical blocks
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdc] Attached SCSI disk
usb 3-6: new full-speed USB device number 3 using xhci_hcd
usb 3-6: New USB device found, idVendor=1b1c, idProduct=0c12
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-6: Product: H150i Platinum
usb 3-6: Manufacturer: Corsair
usb 3-6: SerialNumber: 7289_2.0
tsc: Refined TSC clocksource calibration: 3299.042 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f8dc3bba88, max_idle_ns: 440795361811 ns
usb 3-3.1: new high-speed USB device number 4 using xhci_hcd
usb 3-3.1: New USB device found, idVendor=045e, idProduct=0728
usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3.1: Product: Microsoft LifeCam VX-5000
usb 3-3.1: Manufacturer: Microsoft
usb 4-3.2: new SuperSpeed USB device number 3 using xhci_hcd
usb 4-3.2: New USB device found, idVendor=2109, idProduct=0813
usb 4-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3.2: Product: USB3.0 Hub
usb 4-3.2: Manufacturer: VIA Labs, Inc.
hub 4-3.2:1.0: USB hub found
hub 4-3.2:1.0: 4 ports detected
usb 3-13: new full-speed USB device number 5 using xhci_hcd
usb 3-13: New USB device found, idVendor=4852, idProduct=0005
usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-13: Product: Music Streamer Pro
usb 3-13: Manufacturer: www.hirestech.com 2012 REV 2.1
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:4852:0005.0001: hiddev0,hidraw0: USB HID v1.00 Device [www.hirestech.com 2012 REV 2.1 Music Streamer Pro] on usb-0000:00:14.0-13/input2
usb 3-3.2: new high-speed USB device number 6 using xhci_hcd
usb 3-3.2: New USB device found, idVendor=2109, idProduct=2813
usb 3-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3.2: Product: USB2.0 Hub
usb 3-3.2: Manufacturer: VIA Labs, Inc.
hub 3-3.2:1.0: USB hub found
hub 3-3.2:1.0: 4 ports detected
usb 4-3.2.1: new SuperSpeed USB device number 4 using xhci_hcd
clocksource: Switched to clocksource tsc
usb 4-3.2.1: New USB device found, idVendor=2109, idProduct=0813
usb 4-3.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3.2.1: Product: USB3.0 Hub
usb 4-3.2.1: Manufacturer: VIA Labs, Inc.
hub 4-3.2.1:1.0: USB hub found
hub 4-3.2.1:1.0: 4 ports detected
usb 3-3.3: new full-speed USB device number 7 using xhci_hcd
usb 3-3.3: New USB device found, idVendor=03eb, idProduct=5854
usb 3-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3.3: Product: XT-USB Converter
usb 3-3.3: Manufacturer: Hagstrom Electronics Inc.
input: Hagstrom Electronics Inc. XT-USB Converter as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3:1.0/0003:03EB:5854.0002/input/input2
hid-generic 0003:03EB:5854.0002: input,hidraw1: USB HID v1.00 Keyboard [Hagstrom Electronics Inc. XT-USB Converter] on usb-0000:00:14.0-3.3/input0
hid-generic 0003:03EB:5854.0003: hiddev1,hidraw2: USB HID v1.00 Device [Hagstrom Electronics Inc. XT-USB Converter] on usb-0000:00:14.0-3.3/input1
usb 3-3.2.1: new high-speed USB device number 8 using xhci_hcd
usb 3-3.2.1: New USB device found, idVendor=2109, idProduct=2813
usb 3-3.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3.2.1: Product: USB2.0 Hub
usb 3-3.2.1: Manufacturer: VIA Labs, Inc.
hub 3-3.2.1:1.0: USB hub found
hub 3-3.2.1:1.0: 4 ports detected
usb 3-3.4: new full-speed USB device number 9 using xhci_hcd
usb 3-3.4: New USB device found, idVendor=046d, idProduct=c52b
usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3.4: Product: USB Receiver
usb 3-3.4: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0006: hiddev2,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.4/input2
input: Logitech M570 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.2/0003:046D:C52B.0006/0003:046D:1028.0007/input/input3
logitech-hidpp-device 0003:046D:1028.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:14.0-3.4:1
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice System Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on Device-mapper event daemon FIFOs.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
systemd-journald[419]: Received request to flush runtime journal from PID 1
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 240
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
media: Linux media interface: v0.10
Linux video capture interface: v2.00
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
usb 3-13: current rate 30465 is different from the runtime rate 96000
uvcvideo: Found UVC 1.00 device Microsoft LifeCam VX-5000 (045e:0728)
uvcvideo 3-3.1:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 3-3.1:1.0: Entity type for entity Camera 1 was not initialized!
uvcvideo 3-3.1:1.0: Entity type for entity Extension 4 was not initialized!
input: Microsoft LifeCam VX-5000: Micr as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb 3-13: current rate 30465 is different from the runtime rate 96000
usbcore: registered new interface driver snd-usb-audio
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
intel_rapl: DRAM domain energy unit 15300pj
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input15
EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
random: crng init done
Adding 16695292k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:16695292k SSFS
audit: type=1400 audit(1528067099.359:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1105 comm="apparmor_parser"
audit: type=1400 audit(1528067099.360:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd" pid=1106 comm="apparmor_parser"
audit: type=1400 audit(1528067099.361:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=1101 comm="apparmor_parser"
audit: type=1400 audit(1528067099.361:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1103 comm="apparmor_parser"
audit: type=1400 audit(1528067099.361:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1108 comm="apparmor_parser"
audit: type=1400 audit(1528067099.362:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1102 comm="apparmor_parser"
audit: type=1400 audit(1528067099.362:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1102 comm="apparmor_parser"
audit: type=1400 audit(1528067099.362:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1097 comm="apparmor_parser"
audit: type=1400 audit(1528067099.362:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1097 comm="apparmor_parser"
audit: type=1400 audit(1528067099.362:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1097 comm="apparmor_parser"
new mount options do not match the existing superblock, will be ignored
vboxdrv: Found 12 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3299041451 Hz
vboxdrv: Successfully loaded version 5.2.12 (interface 0x00290001)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
nvidia-modeset: Allocated GPU:0 (GPU-adadd7f0-18b7-24e9-319c-ed84c5f65933) @ PCI:0000:01:00.0
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
logitech-hidpp-device 0003:046D:1028.0007: HID++ 1.0 device connected.
usb 3-13: current rate 4500480 is different from the runtime rate 44100
usb 3-13: current rate 4500480 is different from the runtime rate 44100
usb 3-13: current rate 4500480 is different from the runtime rate 44100
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=52)
Initialized host personality
NET: Registered protocol family 40
usb 3-13: current rate 4500480 is different from the runtime rate 44100
usb 3-13: current rate 4500480 is different from the runtime rate 44100
usb 3-13: current rate 4500480 is different from the runtime rate 44100
logitech-djreceiver 0003:046D:C52B.000A: hiddev2,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.4/input2
input: Logitech M570 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.2/0003:046D:C52B.000A/0003:046D:1028.000B/input/input16
logitech-hidpp-device 0003:046D:1028.000B: input,hidraw4: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:14.0-3.4:1
SUPR0GipMap: fGetGipCpu=0xb
EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc): mounted filesystem with ordered data mode. Opts: (null)
vboxdrv: 0000000000000000 VMMR0.r0
vboxdrv: 0000000000000000 VBoxDDR0.r0
vboxdrv: 0000000000000000 VBoxEhciR0.r0
usb 3-13: current rate 4500480 is different from the runtime rate 44100
usb 3-13: current rate 4500480 is different from the runtime rate 44100
usb 3-6: reset full-speed USB device number 3 using xhci_hcd
vboxdrv: 0000000000000000 VMMR0.r0
vboxdrv: 0000000000000000 VBoxDDR0.r0
vboxdrv: 0000000000000000 VBoxEhciR0.r0
usb 3-6: reset full-speed USB device number 3 using xhci_hcd
kauditd_printk_skb: 14 callbacks suppressed
audit: type=1400 audit(1528067503.963:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=5453 comm="apparmor_parser"
Bridge firewalling registered
Initializing XFRM netlink socket
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
docker0: port 1(vethdace081) entered blocking state
docker0: port 1(vethdace081) entered disabled state
device vethdace081 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethdace081: link is not ready
eth0: renamed from veth68406a7
IPv6: ADDRCONF(NETDEV_CHANGE): vethdace081: link becomes ready
docker0: port 1(vethdace081) entered blocking state
docker0: port 1(vethdace081) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
usb 3-6: reset full-speed USB device number 3 using xhci_hcd
docker0: port 2(veth1d2e8e0) entered blocking state
docker0: port 2(veth1d2e8e0) entered disabled state
device veth1d2e8e0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth1d2e8e0: link is not ready
docker0: port 2(veth1d2e8e0) entered blocking state
docker0: port 2(veth1d2e8e0) entered forwarding state
docker0: port 2(veth1d2e8e0) entered disabled state
eth0: renamed from veth9cd5ece
IPv6: ADDRCONF(NETDEV_CHANGE): veth1d2e8e0: link becomes ready
docker0: port 2(veth1d2e8e0) entered blocking state
docker0: port 2(veth1d2e8e0) entered forwarding state
perf: interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
perf: interrupt took too long (3143 > 3135), lowering kernel.perf_event_max_sample_rate to 63500
docker0: port 2(veth1d2e8e0) entered disabled state
veth9cd5ece: renamed from eth0
docker0: port 2(veth1d2e8e0) entered disabled state
device veth1d2e8e0 left promiscuous mode
docker0: port 2(veth1d2e8e0) entered disabled state
docker0: port 2(vetha741c6d) entered blocking state
docker0: port 2(vetha741c6d) entered disabled state
device vetha741c6d entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vetha741c6d: link is not ready
docker0: port 2(vetha741c6d) entered blocking state
docker0: port 2(vetha741c6d) entered forwarding state
docker0: port 2(vetha741c6d) entered disabled state
eth0: renamed from veth24d9892
IPv6: ADDRCONF(NETDEV_CHANGE): vetha741c6d: link becomes ready
docker0: port 2(vetha741c6d) entered blocking state
docker0: port 2(vetha741c6d) entered forwarding state
docker0: port 2(vetha741c6d) entered disabled state
veth24d9892: renamed from eth0
docker0: port 2(vetha741c6d) entered disabled state
device vetha741c6d left promiscuous mode
docker0: port 2(vetha741c6d) entered disabled state
docker0: port 2(veth326d986) entered blocking state
docker0: port 2(veth326d986) entered disabled state
device veth326d986 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth326d986: link is not ready
docker0: port 2(veth326d986) entered blocking state
docker0: port 2(veth326d986) entered forwarding state
docker0: port 2(veth326d986) entered disabled state
eth0: renamed from veth40a441b
IPv6: ADDRCONF(NETDEV_CHANGE): veth326d986: link becomes ready
docker0: port 2(veth326d986) entered blocking state
docker0: port 2(veth326d986) entered forwarding state
docker0: port 2(veth326d986) entered disabled state
veth40a441b: renamed from eth0
docker0: port 2(veth326d986) entered disabled state
device veth326d986 left promiscuous mode
docker0: port 2(veth326d986) entered disabled state
docker0: port 2(veth07cfb04) entered blocking state
docker0: port 2(veth07cfb04) entered disabled state
device veth07cfb04 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth07cfb04: link is not ready
eth0: renamed from vethd08977f
IPv6: ADDRCONF(NETDEV_CHANGE): veth07cfb04: link becomes ready
docker0: port 2(veth07cfb04) entered blocking state
docker0: port 2(veth07cfb04) entered forwarding state
docker0: port 2(veth07cfb04) entered disabled state
vethd08977f: renamed from eth0
docker0: port 2(veth07cfb04) entered disabled state
device veth07cfb04 left promiscuous mode
docker0: port 2(veth07cfb04) entered disabled state
docker0: port 2(vethb6e6951) entered blocking state
docker0: port 2(vethb6e6951) entered disabled state
device vethb6e6951 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethb6e6951: link is not ready
eth0: renamed from veth00839e9
IPv6: ADDRCONF(NETDEV_CHANGE): vethb6e6951: link becomes ready
docker0: port 2(vethb6e6951) entered blocking state
docker0: port 2(vethb6e6951) entered forwarding state
docker0: port 2(vethb6e6951) entered disabled state
veth00839e9: renamed from eth0
docker0: port 2(vethb6e6951) entered disabled state
device vethb6e6951 left promiscuous mode
docker0: port 2(vethb6e6951) entered disabled state
docker0: port 2(vethe5b2256) entered blocking state
docker0: port 2(vethe5b2256) entered disabled state
device vethe5b2256 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethe5b2256: link is not ready
eth0: renamed from veth8d818d9
IPv6: ADDRCONF(NETDEV_CHANGE): vethe5b2256: link becomes ready
docker0: port 2(vethe5b2256) entered blocking state
docker0: port 2(vethe5b2256) entered forwarding state
docker0: port 2(vethe5b2256) entered disabled state
veth8d818d9: renamed from eth0
docker0: port 2(vethe5b2256) entered disabled state
device vethe5b2256 left promiscuous mode
docker0: port 2(vethe5b2256) entered disabled state
docker0: port 2(veth1ec459a) entered blocking state
docker0: port 2(veth1ec459a) entered disabled state
device veth1ec459a entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth1ec459a: link is not ready
eth0: renamed from veth27cfc0e
IPv6: ADDRCONF(NETDEV_CHANGE): veth1ec459a: link becomes ready
docker0: port 2(veth1ec459a) entered blocking state
docker0: port 2(veth1ec459a) entered forwarding state
docker0: port 2(veth1ec459a) entered disabled state
veth27cfc0e: renamed from eth0
docker0: port 2(veth1ec459a) entered disabled state
device veth1ec459a left promiscuous mode
docker0: port 2(veth1ec459a) entered disabled state
docker0: port 2(veth63382e2) entered blocking state
docker0: port 2(veth63382e2) entered disabled state
device veth63382e2 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth63382e2: link is not ready
docker0: port 2(veth63382e2) entered blocking state
docker0: port 2(veth63382e2) entered forwarding state
docker0: port 2(veth63382e2) entered disabled state
eth0: renamed from veth95a69d8
IPv6: ADDRCONF(NETDEV_CHANGE): veth63382e2: link becomes ready
docker0: port 2(veth63382e2) entered blocking state
docker0: port 2(veth63382e2) entered forwarding state
docker0: port 2(veth63382e2) entered disabled state
veth95a69d8: renamed from eth0
docker0: port 2(veth63382e2) entered disabled state
device veth63382e2 left promiscuous mode
docker0: port 2(veth63382e2) entered disabled state
docker0: port 2(veth2e6a7aa) entered blocking state
docker0: port 2(veth2e6a7aa) entered disabled state
device veth2e6a7aa entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth2e6a7aa: link is not ready
docker0: port 2(veth2e6a7aa) entered blocking state
docker0: port 2(veth2e6a7aa) entered forwarding state
docker0: port 2(veth2e6a7aa) entered disabled state
eth0: renamed from veth669493e
IPv6: ADDRCONF(NETDEV_CHANGE): veth2e6a7aa: link becomes ready
docker0: port 2(veth2e6a7aa) entered blocking state
docker0: port 2(veth2e6a7aa) entered forwarding state
docker0: port 2(veth2e6a7aa) entered disabled state
veth669493e: renamed from eth0
docker0: port 2(veth2e6a7aa) entered disabled state
device veth2e6a7aa left promiscuous mode
docker0: port 2(veth2e6a7aa) entered disabled state
docker0: port 2(veth0ded6f4) entered blocking state
docker0: port 2(veth0ded6f4) entered disabled state
device veth0ded6f4 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth0ded6f4: link is not ready
eth0: renamed from vethcf9cc26
IPv6: ADDRCONF(NETDEV_CHANGE): veth0ded6f4: link becomes ready
docker0: port 2(veth0ded6f4) entered blocking state
docker0: port 2(veth0ded6f4) entered forwarding state
perf: interrupt took too long (3929 > 3928), lowering kernel.perf_event_max_sample_rate to 50750
docker0: port 2(veth0ded6f4) entered disabled state
vethcf9cc26: renamed from eth0
docker0: port 2(veth0ded6f4) entered disabled state
device veth0ded6f4 left promiscuous mode
docker0: port 2(veth0ded6f4) entered disabled state
docker0: port 2(veth9154d7d) entered blocking state
docker0: port 2(veth9154d7d) entered disabled state
device veth9154d7d entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth9154d7d: link is not ready
docker0: port 2(veth9154d7d) entered blocking state
docker0: port 2(veth9154d7d) entered forwarding state
docker0: port 2(veth9154d7d) entered disabled state
eth0: renamed from veth5141f8d
IPv6: ADDRCONF(NETDEV_CHANGE): veth9154d7d: link becomes ready
docker0: port 2(veth9154d7d) entered blocking state
docker0: port 2(veth9154d7d) entered forwarding state
docker0: port 2(veth9154d7d) entered disabled state
veth5141f8d: renamed from eth0
docker0: port 2(veth9154d7d) entered disabled state
device veth9154d7d left promiscuous mode
docker0: port 2(veth9154d7d) entered disabled state
docker0: port 2(vethb7d3019) entered blocking state
docker0: port 2(vethb7d3019) entered disabled state
device vethb7d3019 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethb7d3019: link is not ready
eth0: renamed from vethddd9651
IPv6: ADDRCONF(NETDEV_CHANGE): vethb7d3019: link becomes ready
docker0: port 2(vethb7d3019) entered blocking state
docker0: port 2(vethb7d3019) entered forwarding state
docker0: port 2(vethb7d3019) entered disabled state
vethddd9651: renamed from eth0
docker0: port 2(vethb7d3019) entered disabled state
device vethb7d3019 left promiscuous mode
docker0: port 2(vethb7d3019) entered disabled state
docker0: port 2(veth295afdf) entered blocking state
docker0: port 2(veth295afdf) entered disabled state
device veth295afdf entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth295afdf: link is not ready
docker0: port 2(veth295afdf) entered blocking state
docker0: port 2(veth295afdf) entered forwarding state
docker0: port 2(veth295afdf) entered disabled state
eth0: renamed from veth56f25a5
IPv6: ADDRCONF(NETDEV_CHANGE): veth295afdf: link becomes ready
docker0: port 2(veth295afdf) entered blocking state
docker0: port 2(veth295afdf) entered forwarding state
docker0: port 2(veth295afdf) entered disabled state
veth56f25a5: renamed from eth0
docker0: port 2(veth295afdf) entered disabled state
device veth295afdf left promiscuous mode
docker0: port 2(veth295afdf) entered disabled state
docker0: port 2(vethe567778) entered blocking state
docker0: port 2(vethe567778) entered disabled state
device vethe567778 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethe567778: link is not ready
docker0: port 2(vethe567778) entered blocking state
docker0: port 2(vethe567778) entered forwarding state
docker0: port 2(vethe567778) entered disabled state
eth0: renamed from vethe82ac5c
IPv6: ADDRCONF(NETDEV_CHANGE): vethe567778: link becomes ready
docker0: port 2(vethe567778) entered blocking state
docker0: port 2(vethe567778) entered forwarding state
docker0: port 2(vethe567778) entered disabled state
vethe82ac5c: renamed from eth0
docker0: port 2(vethe567778) entered disabled state
device vethe567778 left promiscuous mode
docker0: port 2(vethe567778) entered disabled state
docker0: port 2(vetha52e73f) entered blocking state
docker0: port 2(vetha52e73f) entered disabled state
device vetha52e73f entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vetha52e73f: link is not ready
docker0: port 2(vetha52e73f) entered blocking state
docker0: port 2(vetha52e73f) entered forwarding state
docker0: port 2(vetha52e73f) entered disabled state
eth0: renamed from veth42232dd
IPv6: ADDRCONF(NETDEV_CHANGE): vetha52e73f: link becomes ready
docker0: port 2(vetha52e73f) entered blocking state
docker0: port 2(vetha52e73f) entered forwarding state
docker0: port 2(vetha52e73f) entered disabled state
veth42232dd: renamed from eth0
docker0: port 2(vetha52e73f) entered disabled state
device vetha52e73f left promiscuous mode
docker0: port 2(vetha52e73f) entered disabled state
docker0: port 2(veth7499eb9) entered blocking state
docker0: port 2(veth7499eb9) entered disabled state
device veth7499eb9 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth7499eb9: link is not ready
eth0: renamed from veth5fed107
IPv6: ADDRCONF(NETDEV_CHANGE): veth7499eb9: link becomes ready
docker0: port 2(veth7499eb9) entered blocking state
docker0: port 2(veth7499eb9) entered forwarding state
docker0: port 2(veth7499eb9) entered disabled state
veth5fed107: renamed from eth0
docker0: port 2(veth7499eb9) entered disabled state
device veth7499eb9 left promiscuous mode
docker0: port 2(veth7499eb9) entered disabled state
usb 3-3.2.1: reset high-speed USB device number 8 using xhci_hcd
docker0: port 2(veth4cb2385) entered blocking state
docker0: port 2(veth4cb2385) entered disabled state
device veth4cb2385 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth4cb2385: link is not ready
eth0: renamed from veth4aa0f81
IPv6: ADDRCONF(NETDEV_CHANGE): veth4cb2385: link becomes ready
docker0: port 2(veth4cb2385) entered blocking state
docker0: port 2(veth4cb2385) entered forwarding state
docker0: port 2(veth4cb2385) entered disabled state
veth4aa0f81: renamed from eth0
docker0: port 2(veth4cb2385) entered disabled state
device veth4cb2385 left promiscuous mode
docker0: port 2(veth4cb2385) entered disabled state
docker0: port 2(veth6a862ea) entered blocking state
docker0: port 2(veth6a862ea) entered disabled state
device veth6a862ea entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth6a862ea: link is not ready
eth0: renamed from veth043780a
IPv6: ADDRCONF(NETDEV_CHANGE): veth6a862ea: link becomes ready
docker0: port 2(veth6a862ea) entered blocking state
docker0: port 2(veth6a862ea) entered forwarding state
docker0: port 2(veth6a862ea) entered disabled state
veth043780a: renamed from eth0
docker0: port 2(veth6a862ea) entered disabled state
device veth6a862ea left promiscuous mode
docker0: port 2(veth6a862ea) entered disabled state
docker0: port 2(veth1f57885) entered blocking state
docker0: port 2(veth1f57885) entered disabled state
device veth1f57885 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth1f57885: link is not ready
docker0: port 2(veth1f57885) entered blocking state
docker0: port 2(veth1f57885) entered forwarding state
docker0: port 2(veth1f57885) entered disabled state
eth0: renamed from veth5629615
IPv6: ADDRCONF(NETDEV_CHANGE): veth1f57885: link becomes ready
docker0: port 2(veth1f57885) entered blocking state
docker0: port 2(veth1f57885) entered forwarding state
docker0: port 2(veth1f57885) entered disabled state
veth5629615: renamed from eth0
docker0: port 2(veth1f57885) entered disabled state
device veth1f57885 left promiscuous mode
docker0: port 2(veth1f57885) entered disabled state
docker0: port 2(vethca47330) entered blocking state
docker0: port 2(vethca47330) entered disabled state
device vethca47330 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethca47330: link is not ready
eth0: renamed from veth467e3a3
IPv6: ADDRCONF(NETDEV_CHANGE): vethca47330: link becomes ready
docker0: port 2(vethca47330) entered blocking state
docker0: port 2(vethca47330) entered forwarding state
docker0: port 2(vethca47330) entered disabled state
veth467e3a3: renamed from eth0
docker0: port 2(vethca47330) entered disabled state
device vethca47330 left promiscuous mode
docker0: port 2(vethca47330) entered disabled state
docker0: port 2(vethff8e105) entered blocking state
docker0: port 2(vethff8e105) entered disabled state
device vethff8e105 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethff8e105: link is not ready
docker0: port 2(vethff8e105) entered blocking state
docker0: port 2(vethff8e105) entered forwarding state
docker0: port 2(vethff8e105) entered disabled state
eth0: renamed from veth5c155db
IPv6: ADDRCONF(NETDEV_CHANGE): vethff8e105: link becomes ready
docker0: port 2(vethff8e105) entered blocking state
docker0: port 2(vethff8e105) entered forwarding state
docker0: port 2(vethff8e105) entered disabled state
veth5c155db: renamed from eth0
docker0: port 2(vethff8e105) entered disabled state
device vethff8e105 left promiscuous mode
docker0: port 2(vethff8e105) entered disabled state
usb 4-3.2.1: Disable of device-initiated U1 failed.
usb 4-3.2.1: Disable of device-initiated U2 failed.
usb 4-3.2.1: reset SuperSpeed USB device number 4 using xhci_hcd
usb 3-13: current rate 4500480 is different from the runtime rate 44100
usb 3-13: current rate 4500480 is different from the runtime rate 44100
usb 3-13: current rate 4500480 is different from the runtime rate 44100