dmesg - test
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-693.17.1.vz7.43.10 (mockbuild@builder11.eng.sw.ru) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-11) (GCC) ) #1 SMP Tue Feb 27 13:53:18 MSK 2018
Command line: BOOT_IMAGE=/vmlinuz-3.10.0-693.17.1.vz7.43.10 root=/dev/mapper/openvz-root ro crashkernel=auto rd.lvm.lv=openvz/root quiet
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfffbfff] usable
BIOS-e820: [mem 0x00000000bfffc000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Red Hat KVM, BIOS 0.5.1 01/01/2011
Hypervisor detected: KVM
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask FFC0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbfffc max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f71a0-0x000f71af] mapped at [ffff8800000f71a0]
Base memory trampoline at [ffff880000099000] 99000 size 24576
BRK [0x0208e000, 0x0208efff] PGTABLE
BRK [0x0208f000, 0x0208ffff] PGTABLE
BRK [0x02090000, 0x02090fff] PGTABLE
BRK [0x02091000, 0x02091fff] PGTABLE
RAMDISK: [mem 0x357a2000-0x36bc8fff]
Early table checksum verification disabled
ACPI: RSDP 00000000000f7150 00014 (v00 BOCHS )
ACPI: RSDT 00000000bfffec82 00030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 00000000bfffdd37 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 00000000bfffcc00 01137 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
ACPI: FACS 00000000bfffcbc0 00040
ACPI: SSDT 00000000bfffddab 00DE7 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 00000000bfffeb92 000F0 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
NODE_DATA(0) allocated [mem 0x13ffd6000-0x13fffcfff]
Reserving 161MB of memory at 688MB for crashkernel (System RAM: 4095MB)
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 1:3ff86001, primary cpu clock
kvm-clock: using sched offset of 31222175685 cycles
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xbfffbfff]
node 0: [mem 0x100000000-0x13fffffff]
Initmem setup node 0 [mem 0x00001000-0x13fffffff]
On node 0 totalpages: 1048474
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12224 pages used for memmap
DMA32 zone: 782332 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 262144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x608
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbfffc000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xfeffbfff]
PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xfffbffff]
PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
e820: [mem 0xc0000000-0xfeffbfff] available for PCI devices
Booting paravirtualized kernel on KVM
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 46 pages/cpu @ffff88013b200000 s148184 r8192 d32040 u262144
pcpu-alloc: s148184 r8192 d32040 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
KVM setup async PF for cpu 0
kvm-stealtime: cpu 0, msr 13b213480
PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032069
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-693.17.1.vz7.43.10 root=/dev/mapper/openvz-root ro crashkernel=auto rd.lvm.lv=openvz/root quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 3856036k/5242880k available (7109k kernel code, 1048984k absent, 337860k reserved, 4661k data, 1852k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
x86/pti: Unmapping kernel while in userspace
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=16.
NR_IRQS:327936 nr_irqs:552 0
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Detected 2399.316 MHz processor
Calibrating delay loop (skipped) preset value.. 4798.63 BogoMIPS (lpj=2399316)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
Initializing cgroup subsys ve
Initializing cgroup subsys beancounter
Initializing cgroup subsys net_prio
FEATURE SPEC_CTRL Not Present
FEATURE IBPB_SUPPORT Not Present
mce: CPU supports 10 MCE banks
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27258 entries in 107 pages
Enabling x2apic
Enabled x2apic
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel Westmere E56xx/L56xx/X56xx (Nehalem-C) (fam: 06, model: 2c, stepping: 01)
Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
KVM setup paravirtual spinlock
kvm-clock: cpu 1, msr 1:3ff86041, secondary cpu clock
KVM setup async PF for cpu 1
kvm-stealtime: cpu 1, msr 13b253480
kvm-clock: cpu 2, msr 1:3ff86081, secondary cpu clock
KVM setup async PF for cpu 2
kvm-stealtime: cpu 2, msr 13b293480
kvm-clock: cpu 3, msr 1:3ff860c1, secondary cpu clock
KVM setup async PF for cpu 3
kvm-stealtime: cpu 3, msr 13b2d3480
kvm-clock: cpu 4, msr 1:3ff86101, secondary cpu clock
KVM setup async PF for cpu 4
kvm-stealtime: cpu 4, msr 13b313480
kvm-clock: cpu 5, msr 1:3ff86141, secondary cpu clock
KVM setup async PF for cpu 5
kvm-stealtime: cpu 5, msr 13b353480
kvm-clock: cpu 6, msr 1:3ff86181, secondary cpu clock
KVM setup async PF for cpu 6
kvm-stealtime: cpu 6, msr 13b393480
kvm-clock: cpu 7, msr 1:3ff861c1, secondary cpu clock
KVM setup async PF for cpu 7
kvm-stealtime: cpu 7, msr 13b3d3480
kvm-clock: cpu 8, msr 1:3ff86201, secondary cpu clock
KVM setup async PF for cpu 8
kvm-stealtime: cpu 8, msr 13b413480
kvm-clock: cpu 9, msr 1:3ff86241, secondary cpu clock
KVM setup async PF for cpu 9
kvm-stealtime: cpu 9, msr 13b453480
kvm-clock: cpu 10, msr 1:3ff86281, secondary cpu clock
KVM setup async PF for cpu 10
kvm-stealtime: cpu 10, msr 13b493480
kvm-clock: cpu 11, msr 1:3ff862c1, secondary cpu clock
KVM setup async PF for cpu 11
kvm-stealtime: cpu 11, msr 13b4d3480
kvm-clock: cpu 12, msr 1:3ff86301, secondary cpu clock
KVM setup async PF for cpu 12
kvm-stealtime: cpu 12, msr 13b513480
kvm-clock: cpu 13, msr 1:3ff86341, secondary cpu clock
KVM setup async PF for cpu 13
kvm-stealtime: cpu 13, msr 13b553480
kvm-clock: cpu 14, msr 1:3ff86381, secondary cpu clock
KVM setup async PF for cpu 14
kvm-stealtime: cpu 14, msr 13b593480
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 OK
kvm-clock: cpu 15, msr 1:3ff863c1, secondary cpu clock
Brought up 16 CPUs
smpboot: Max logical packages: 16
smpboot: Total of 16 processors activated (76778.11 BogoMIPS)
KVM setup async PF for cpu 15
kvm-stealtime: cpu 15, msr 13b5d3480
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
atomic64 test passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 14:09:10, date: 05/02/18
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io 0xc100-0xc10f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
pci 0000:00:02.0: [1b36:0100] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf4000000-0xf7ffffff]
pci 0000:00:02.0: reg 0x14: [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0: reg 0x18: [mem 0xfc074000-0xfc075fff]
pci 0000:00:02.0: reg 0x1c: [io 0xc040-0xc05f]
pci 0000:00:02.0: reg 0x30: [mem 0xfc060000-0xfc06ffff pref]
pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0xfc040000-0xfc05ffff]
pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f]
pci 0000:00:03.0: reg 0x30: [mem 0xfc000000-0xfc03ffff pref]
pci 0000:00:04.0: [8086:2668] type 00 class 0x040300
pci 0000:00:04.0: reg 0x10: [mem 0xfc070000-0xfc073fff]
pci 0000:00:05.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:05.0: reg 0x20: [io 0xc060-0xc07f]
pci 0000:00:05.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:05.1: reg 0x20: [io 0xc080-0xc09f]
pci 0000:00:05.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:05.2: reg 0x20: [io 0xc0a0-0xc0bf]
pci 0000:00:05.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:05.7: reg 0x10: [mem 0xfc076000-0xfc076fff]
pci 0000:00:06.0: [1af4:1003] type 00 class 0x078000
pci 0000:00:06.0: reg 0x10: [io 0xc0c0-0xc0df]
pci 0000:00:06.0: reg 0x14: [mem 0xfc077000-0xfc077fff]
pci 0000:00:08.0: [1af4:1002] type 00 class 0x00ff00
pci 0000:00:08.0: reg 0x10: [io 0xc0e0-0xc0ff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
ACPI: Enabled 16 GPEs in block 00 to 0F
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbfffc000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
amd_nb: Cannot enumerate AMD northbridges
Switched to clocksource kvm-clock
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 5 devices
ACPI: bus type PNP unregistered
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 20636k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbffc000-0xbfffc000] (64MB) mapped at [ffff8800bbffc000-ffff8800bfffbfff]
sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1525270151.820:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
tcache loaded
tswap loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7571
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 44
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:05.7: EHCI Host Controller
ehci-pci 0000:00:05.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:05.7: irq 10, io mem 0xfc076000
ehci-pci 0000:00:05.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-693.17.1.vz7.43.10 ehci_hcd
usb usb1: SerialNumber: 0000:00:05.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:05.0: UHCI Host Controller
uhci_hcd 0000:00:05.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:05.0: detected 2 ports
uhci_hcd 0000:00:05.0: irq 10, io base 0x0000c060
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-693.17.1.vz7.43.10 uhci_hcd
usb usb2: SerialNumber: 0000:00:05.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:05.1: UHCI Host Controller
uhci_hcd 0000:00:05.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:05.1: detected 2 ports
uhci_hcd 0000:00:05.1: irq 11, io base 0x0000c080
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-693.17.1.vz7.43.10 uhci_hcd
usb usb3: SerialNumber: 0000:00:05.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:05.2: UHCI Host Controller
uhci_hcd 0000:00:05.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:05.2: detected 2 ports
uhci_hcd 0000:00:05.2: irq 11, io base 0x0000c0a0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.0-693.17.1.vz7.43.10 uhci_hcd
usb usb4: SerialNumber: 0000:00:05.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one day, 114 bytes nvram
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0 sig=0x206c1, pf=0x1, revision=0x1
microcode: CPU1 sig=0x206c1, pf=0x1, revision=0x1
microcode: CPU2 sig=0x206c1, pf=0x1, revision=0x1
microcode: CPU3 sig=0x206c1, pf=0x1, revision=0x1
microcode: CPU4 sig=0x206c1, pf=0x1, revision=0x1
microcode: CPU5 sig=0x206c1, pf=0x1, revision=0x1
microcode: CPU6 sig=0x206c1, pf=0x1, revision=0x1
microcode: CPU7 sig=0x206c1, pf=0x1, revision=0x1
microcode: CPU8 sig=0x206c1, pf=0x1, revision=0x1
microcode: CPU9 sig=0x206c1, pf=0x1, revision=0x1
microcode: CPU10 sig=0x206c1, pf=0x1, revision=0x1
microcode: CPU11 sig=0x206c1, pf=0x1, revision=0x1
microcode: CPU12 sig=0x206c1, pf=0x1, revision=0x1
microcode: CPU13 sig=0x206c1, pf=0x1, revision=0x1
microcode: CPU14 sig=0x206c1, pf=0x1, revision=0x1
microcode: CPU15 sig=0x206c1, pf=0x1, revision=0x1
microcode: Microcode Update Driver: v2.01 , Peter Oruba
PM: Hibernation image not present or could not be loaded.
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Virtuozzo kernel - signing key for Kpatch modules: e2dc29b9f4b1a69d1ba2fbe3ef233ae72f4dee09'
Loaded X.509 cert 'Virtuozzo kernel signing key: 6f1f1139b01278227be5e55adf4962184aa84322'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
Magic number: 2:244:181
rtc_cmos 00:00: setting system clock to 2018-05-02 14:09:11 UTC (1525270151)
Freeing unused kernel memory: 1852k freed
page->flags 1fffff00004000 page ffffea0000da0000 head ffffea0000da0000
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected virtualization kvm.
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: No hostname configured.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Journal Service...
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
systemd[1]: Failed to start Load Kernel Modules.
systemd[1]: Unit systemd-modules-load.service entered failed state.
systemd[1]: systemd-modules-load.service failed.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Journal Service.
usb 1-1: new high-speed USB device number 2 using ehci-pci
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
usb 1-1: New USB device found, idVendor=0627, idProduct=0001
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
usb 1-1: Product: QEMU USB Tablet
usb 1-1: Manufacturer: QEMU
usb 1-1: SerialNumber: 42
input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:05.7/usb1/1-1/1-1:1.0/input/input2
hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:05.7-1/input0
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
FDC 0 is a S82078B
libata version 3.00 loaded.
[drm] Initialized
input: ImExPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3
e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:38:1d:3c
e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver
virtio-pci 0000:00:08.0: virtio_pci: leaving for legacy driver
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc100 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc108 irq 15
[drm] Device Version 0.0
[drm] Compression level 0 log level 0
[drm] Currently using mode #0, list at 0x488
[drm] 12286 io pages at offset 0x1000000
[drm] 16777216 byte draw area at offset 0x0
[drm] RAM header offset: 0x3ffe000
[drm] rom modes offset 0x488 for 128 modes
[TTM] Zone kernel: Available graphics memory: 1939276 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] qxl: 16M of VRAM memory size
[drm] qxl: 63M of IO pages memory ready (VRAM domain)
[drm] qxl: 64M of Surface memory size
[drm] main mem slot 1 [f4000000,3ffe000]
[drm] surface mem slot 2 [f8000000,4000000]
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
virtio-pci 0000:00:06.0: irq 24 for MSI/MSI-X
virtio-pci 0000:00:06.0: irq 25 for MSI/MSI-X
[drm] fb mappable at 0xF4000000, size 3145728
[drm] fb: depth 24, pitch 4096, width 1024, height 768
fbcon: qxldrmfb (fb0) is primary device
ata1.00: ATAPI: QEMU DVD-ROM, 1.5.3, max UDMA/100
ata1.01: ATA-7: QEMU HARDDISK, 1.5.3, max UDMA/100
ata1.01: 419430400 sectors, multi 16: LBA48
ata1.00: configured for MWDMA2
ata1.01: configured for MWDMA2
scsi 0:0:0:0: CD-ROM QEMU QEMU DVD-ROM 1.5. PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA QEMU HARDDISK 3 PQ: 0 ANSI: 5
Console: switching to colour frame buffer device 128x48
qxl 0000:00:02.0: fb0: qxldrmfb frame buffer device
[drm] Initialized qxl 0.1.0 20120117 for 0000:00:02.0 on minor 0
sr 0:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:1:0: [sda] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:1:0: [sda] Attached SCSI disk
random: fast init done
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[173]: Received SIGTERM from PID 1 (systemd).
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1525270153.985:2): selinux=0 auid=4294967295 ses=4294967295
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
random: crng init done
PrlSDKError('SDK error: 0x80000249: Unable to connect to Virtuozzo. You may experience a connection problem or the server may be down. Contact your Virtuozzo administrator for assistance.',)
ploop_dev: module loaded
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
EXT4-fs (dm-0): re-mounted. Opts: (null)
VZSTAT: initialized successfully
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Bridge firewalling registered
Enabling conntracks and NAT for ve0
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
systemd-journald[574]: Received request to flush runtime journal from PID 1
IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
IPVS: Creating netns size=2040 id=0
IPVS: ipvs loaded.
systemd-journald[574]: File /var/log/journal/847d4168a4204a0b8d74efc0c07189dd/system.journal corrupted or uncleanly shut down, renaming and replacing.
input: PC Speaker as /devices/platform/pcspkr/input/input4
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 0:0:1:0: Attached scsi generic sg1 type 0
ppdev: user-space parallel port driver
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for crc32 (crc32-pclmul)
Adding 4064252k swap on /dev/sda3. Priority:-1 extents:1 across:4064252k FS
snd_hda_intel 0000:00:04.0: irq 26 for MSI/MSI-X
snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x3/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_generic hdaudioC0D0: inputs:
snd_hda_codec_generic hdaudioC0D0: Line=0x5
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
type=1305 audit(1525270158.495:3): audit_pid=805 old=0 auid=4294967295 ses=4294967295 res=1
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPVS: Creating netns size=2040 id=1
Ebtables v2.0 registered
IPv6: ADDRCONF(NETDEV_UP): ens3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens3: link is not ready
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
e1000: ens3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): ens3: link becomes ready
8021q: 802.1Q VLAN Support v1.8
8021q: adding VLAN 0 to HW filter on device ens3
IPVS: Creating netns size=2040 id=2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered forwarding state
virbr0: port 1(virbr0-nic) entered disabled state
ploop62171: p1
ploop62171: p1
ploop30374: p1
ploop30374: p1
ploop21762: p1
EXT4-fs (ploop62171p1): mounted filesystem with ordered data mode. Opts: ,pfcache_csum
ploop21762: p1
EXT4-fs (ploop62171p1): loaded balloon from 12 (0 blocks)
EXT4-fs (ploop62171p1): re-mounted. Opts: ,pfcache_csum,balloon_ino=12
IPVS: Creating netns size=2040 id=3
CT: 101: started
EXT4-fs (ploop30374p1): mounted filesystem with ordered data mode. Opts: ,pfcache_csum
EXT4-fs (ploop30374p1): loaded balloon from 12 (0 blocks)
EXT4-fs (ploop30374p1): re-mounted. Opts: ,pfcache_csum,balloon_ino=12
IPVS: Creating netns size=2040 id=4
CT: 102: started
EXT4-fs (ploop21762p1): mounted filesystem with ordered data mode. Opts: ,pfcache_csum
EXT4-fs (ploop21762p1): loaded balloon from 12 (0 blocks)
EXT4-fs (ploop21762p1): re-mounted. Opts: ,pfcache_csum,balloon_ino=12
IPVS: Creating netns size=2040 id=5
CT: 103: started
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready