dmesg - asdf

Return To asdf System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-119-generic (buildd@lcy01-amd64-002) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9) ) #143-Ubuntu SMP Mon Apr 2 16:08:22 UTC 2018 (Ubuntu 4.4.0-119.143-generic 4.4.114)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cff73fff] usable
BIOS-e820: [mem 0x00000000cff74000-0x00000000cff75fff] ACPI NVS
BIOS-e820: [mem 0x00000000cff76000-0x00000000cff96fff] ACPI data
BIOS-e820: [mem 0x00000000cff97000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fecf0000-0x00000000fecf0fff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection missing in CPU!
SMBIOS 2.3 present.
DMI: Dell Computer Corporation Dimension 8300               /0W2562, BIOS A05 02/23/2004
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0xcff74 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 0C0000000 mask FF0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [c00fe710]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x021fffff]
Base memory trampoline at [c009b000] 9b000 size 16384
BRK [0x01d80000, 0x01d80fff] PGTABLE
BRK [0x01d81000, 0x01d81fff] PGTABLE
RAMDISK: [mem 0x33c70000-0x35e2ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FEB90 000014 (v00 DELL  )
ACPI: RSDT 0x00000000000FD1CB 000034 (v01 DELL   8300     00000007 ASL  00000061)
ACPI: FACP 0x00000000000FD1FF 000074 (v01 DELL   8300     00000007 ASL  00000061)
ACPI: DSDT 0x00000000FFFC6BE6 002426 (v01 DELL   dt_ex    00001000 MSFT 0100000D)
ACPI: FACS 0x00000000CFF74000 000040
ACPI: SSDT 0x00000000FFFC90B3 000096 (v01 DELL   st_ex    00001000 MSFT 0100000D)
ACPI: APIC 0x00000000000FD273 00006C (v01 DELL   8300     00000007 ASL  00000061)
ACPI: BOOT 0x00000000000FD2DF 000028 (v01 DELL   8300     00000007 ASL  00000061)
ACPI: Local APIC address 0xfee00000
2435MB HIGHMEM available.
891MB LOWMEM available.
  mapped low ram: 0 - 37bfe000
  low ram: 0 - 37bfe000
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
  HighMem  [mem 0x0000000037bfe000-0x00000000cff73fff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009ffff]
  node   0: [mem 0x0000000000100000-0x00000000cff73fff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000000cff73fff]
On node 0 totalpages: 851731
  DMA zone: 40 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3999 pages, LIFO batch:0
  Normal zone: 2190 pages used for memmap
  Normal zone: 224254 pages, LIFO batch:31
  HighMem zone: 623478 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0xd0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 19 pages/cpu @f628b000 s47436 r0 d30388 u77824
pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 849501
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
microcode: CPU0 microcode updated early to revision 0xc, date = 2005-04-21
Initializing CPU#0
Initializing HighMem for node 0 (00037bfe:000cff74)
Initializing Movable for node 0 (00000000:00000000)
Memory: 3321356K/3406924K available (8013K kernel code, 777K rwdata, 3172K rodata, 948K init, 800K bss, 85568K reserved, 0K cma-reserved, 2493912K highmem)
virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xc1bb2000 - 0xc1c9f000   ( 948 kB)
                     .data : 0xc17d3774 - 0xc1bb0740   (3955 kB)
                     .text : 0xc1000000 - 0xc17d3774   (8013 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
NR_IRQS:2304 nr_irqs:456 16
CPU 0 irqstacks, hard=f2c38000 soft=f2c3a000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 3670016 bytes of page_ext
tsc: Fast TSC calibration using PIT
tsc: Detected 2992.526 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.05 BogoMIPS (lpj=11970104)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
FEATURE SPEC_CTRL Not Present
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
Spectre V2 mitigation: Mitigation: Full generic retpoline
Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
Spectre V2 mitigation: Filling RSB on context switch
Freeing SMP alternatives memory: 28K
ftrace: allocating 31465 entries in 62 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 4
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz (family: 0xf, model: 0x3, stepping: 0x3)
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version:                0
... bit width:              40
... generic registers:      18
... value mask:             000000ffffffffff
... max period:             0000007fffffffff
... fixed-purpose events:   0
... event mask:             000000000003ffff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f24d6000 soft=f24e0000
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
Initializing CPU#1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (11970.10 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcff74000-0xcff75fff] (8192 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time:  0:09:20, date: 04/18/18
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
Simple Boot Flag value 0x87 read from CMOS RAM was invalid
Simple Boot Flag at 0x7a set to 0x1
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: PCI BIOS revision 2.10 entry at 0xfbb31, last bus=2
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:2578] type 00 class 0x060000
pci 0000:00:00.0: Enabling MCH 'Overflow' Device
pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
pci 0000:00:01.0: [8086:2579] type 01 class 0x060400
pci 0000:00:06.0: [8086:257e] type 00 class 0x088000
pci 0000:00:06.0: reg 0x10: [mem 0xfecf0000-0xfecf0fff]
pci 0000:00:1d.0: [8086:24d2] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0xff80-0xff9f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:24d4] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0xff60-0xff7f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:24d7] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0xff40-0xff5f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:24de] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io  0xff20-0xff3f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:24dd] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xffa80800-0xffa80bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:24d0] type 00 class 0x060100
pci 0000:00:1f.0: HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0880-0x08bf] claimed by ICH4 GPIO
pci 0000:00:1f.1: [8086:24db] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:1f.1: reg 0x14: [io  0x03f4-0x03f7]
pci 0000:00:1f.1: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:1f.1: reg 0x1c: [io  0x0374-0x0377]
pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]
pci 0000:00:1f.1: reg 0x24: [mem 0xfebffc00-0xfebfffff]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:1f.2: [8086:24d1] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io  0xfe00-0xfe07]
pci 0000:00:1f.2: reg 0x14: [io  0xfe10-0xfe13]
pci 0000:00:1f.2: reg 0x18: [io  0xfe20-0xfe27]
pci 0000:00:1f.2: reg 0x1c: [io  0xfe30-0xfe33]
pci 0000:00:1f.2: reg 0x20: [io  0xfea0-0xfeaf]
pci 0000:00:1f.3: [8086:24d3] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io  0xeda0-0xedbf]
pci 0000:00:1f.5: [8086:24d5] type 00 class 0x040100
pci 0000:00:1f.5: reg 0x10: [io  0xee00-0xeeff]
pci 0000:00:1f.5: reg 0x14: [io  0xedc0-0xedff]
pci 0000:00:1f.5: reg 0x18: [mem 0xfebffa00-0xfebffbff]
pci 0000:00:1f.5: reg 0x1c: [mem 0xfebff900-0xfebff9ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [10de:0045] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfeafffff]
pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xefffffff pref]
pci 0000:02:02.0: [1102:0007] type 00 class 0x040100
pci 0000:02:02.0: reg 0x10: [io  0xdf20-0xdf3f]
pci 0000:02:02.0: supports D1 D2
pci 0000:02:08.0: [8086:1050] type 00 class 0x020000
pci 0000:02:08.0: reg 0x10: [mem 0xfbfff000-0xfbffffff]
pci 0000:02:08.0: reg 0x14: [io  0xdf40-0xdf7f]
pci 0000:02:08.0: supports D1 D2
pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: Enabled 1 GPEs in block 00 to 1F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:06.0: can't claim BAR 0 [mem 0xfecf0000-0xfecf0fff]: no compatible bridge window
pci 0000:00:1d.7: can't claim BAR 0 [mem 0xffa80800-0xffa80bff]: no compatible bridge window
e820: reserve RAM buffer [mem 0xcff74000-0xcfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x00100000-0x00ffffff] could not be reserved
system 00:00: [mem 0x01000000-0xcff73fff] could not be reserved
system 00:00: [mem 0x000c0000-0x000fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:00: [mem 0xfecf0000-0xfecf0fff] has been reserved
system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:00: [mem 0xffc00000-0xffffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [dma 2]
pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:06: disabling [io  0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x0800-0x087f]
pnp 00:06: disabling [io  0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io  0x0800-0x087f]
system 00:06: [io  0x0c00-0x0c7f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
PnPBIOS: Disabled by ACPI PNP
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:06.0: BAR 0: assigned [mem 0xf0000000-0xf0000fff]
pci 0000:00:1d.7: BAR 0: assigned [mem 0xf0001000-0xf00013ff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfeafffff]
pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xefffffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 02]
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfebfffff window]
pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xd8000000-0xefffffff pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:02: resource 7 [mem 0xd0000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 34560K
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1524010161.344:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xf8600000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel i875 Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
scsi host2: ata_piix
ata1: port disabled--ignoring
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 18
ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 18
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0001000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-119-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-119-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-119-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.0-119-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.4.0-119-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0xf33, pf=0x4, revision=0xc
microcode: CPU1 sig=0xf33, pf=0x4, revision=0xc
microcode: Microcode Update Driver: v2.01 , Peter Oruba
Using IPI No-Shortcut mode
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: cd25daf5f2c6791a52e12acbf66969414c24a779'
zswap: loaded using pool lzo/zbud
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 14:950:152
rtc_cmos 00:01: setting system clock to 2018-04-18 00:09:22 UTC (1524010162)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata3.00: ATA-8: WL160GBSATA, 03.00C05, max UDMA/133
ata3.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata2.00: HPA detected: current 156365903, native 156368016
ata2.00: ATA-6: SAMSUNG SV0813H, RJ100-11, max UDMA/100
ata2.00: 156365903 sectors, multi 8: LBA 
ata2.01: HPA detected: current 39100223, native 39102336
ata2.01: ATA-5: IC35L020AVVA07-0, VA1OA51A, max UDMA/100
ata2.01: 39100223 sectors, multi 8: LBA 
ata2.00: configured for UDMA/100
ata2.01: configured for UDMA/100
isapnp: No Plug & Play device found
scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG SV0813H  0-11 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 156365903 512-byte logical blocks: (80.1 GB/74.6 GiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:1:0: Direct-Access     ATA      IC35L020AVVA07-0 A51A PQ: 0 ANSI: 5
sd 1:0:1:0: [sdb] 39100223 512-byte logical blocks: (20.0 GB/18.6 GiB)
sd 1:0:1:0: Attached scsi generic sg1 type 0
sd 1:0:1:0: [sdb] Write Protect is off
sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access     ATA      WL160GBSATA      0C05 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1 sdc2 < sdc5 >
sd 2:0:0:0: [sdc] Attached SCSI disk
 sda: sda1 sda2 < sda5 >
 sdb: sdb1
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:1:0: [sdb] Attached SCSI disk
usb 4-1: new full-speed USB device number 2 using uhci_hcd
usb 4-1: New USB device found, idVendor=046d, idProduct=c52b
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB Receiver
usb 4-1: Manufacturer: Logitech
tsc: Refined TSC clocksource calibration: 2992.499 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b2297a4c00, max_idle_ns: 440795286487 ns
clocksource: Switched to clocksource tsc
Freeing unused kernel memory: 948K
Write protecting the kernel text: 8016k
Write protecting the kernel read-only data: 3176k
random: systemd-udevd: uninitialized urandom read (16 bytes read, 30 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 30 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 30 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 30 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 30 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 30 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 30 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 30 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 30 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 30 bits of entropy available)
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
FDC 0 is a post-1991 82077
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:02:08.0 eth0: addr 0xfbfff000, irq 20, MAC addr 00:0c:f1:eb:38:43
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-1/input2
e100 0000:02:08.0 enp2s8: renamed from eth0
input: Logitech M705 as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.2/0003:046D:C52B.0003/0003:046D:406D.0004/input/input3
logitech-hidpp-device 0003:046D:406D.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:1d.2-1:1
random: nonblocking pool is initialized
raid6: mmxx1    gen()  1863 MB/s
raid6: mmxx2    gen()  2162 MB/s
raid6: sse1x1   gen()  1059 MB/s
raid6: sse1x2   gen()  1908 MB/s
raid6: sse2x1   gen()  2197 MB/s
raid6: sse2x1   xor()  1894 MB/s
raid6: sse2x2   gen()  3261 MB/s
raid6: sse2x2   xor()  1843 MB/s
raid6: using algorithm sse2x2 gen() 3261 MB/s
raid6: .... xor() 1843 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
xor: measuring software checksum speed
   pIII_sse  :  5629.000 MB/sec
   prefetch64-sse:  5597.000 MB/sec
xor: using function: pIII_sse (5629.000 MB/sec)
Btrfs loaded
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86.
systemd[1]: Set hostname to .
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Nameserver information manager...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Debug File System...
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Read required files in advance.
systemd[1]: Reached target Slices.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Set console keymap...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Nameserver information manager.
systemd[1]: Reached target Network (Pre).
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
lp0: using parport0 (interrupt-driven).
systemd[1]: Started LVM2 metadata daemon.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Journal Service.
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
systemd-journald[291]: Received request to flush runtime journal from PID 1
intel_rng: Firmware space is locked read-only. If you can't or
               intel_rng: don't want to disable this in firmware setup, and if
               intel_rng: you are certain that your system has a functional
               intel_rng: RNG, try using the 'no_fwh_detect' option.
EDAC MC: Ver: 3.0.0
EDAC i82875p: i82875p init one
EDAC MC0: Giving out device to module i82875p_edac controller i82875p: DEV 0000:00:00.0 (POLLED)
EDAC PCI0: Giving out device to module i82875p_edac controller EDAC PCI controller: DEV 0000:00:00.0 (POLLED)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
snd_ca0106 0000:02:02.0: Model 1007 Rev 00000000 Serial 10071102
snd_intel8x0 0000:00:1f.5: intel8x0_measure_ac97_clock: measured 54542 usecs (2628 samples)
snd_intel8x0 0000:00:1f.5: clocking to 48000
audit: type=1400 audit(1524010183.810:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=661 comm="apparmor_parser"
audit: type=1400 audit(1524010183.810:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=661 comm="apparmor_parser"
audit: type=1400 audit(1524010183.810:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=661 comm="apparmor_parser"
audit: type=1400 audit(1524010183.810:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=661 comm="apparmor_parser"
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
audit: type=1400 audit(1524010183.898:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=660 comm="apparmor_parser"
audit: type=1400 audit(1524010183.898:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=660 comm="apparmor_parser"
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86 Kernel Module  304.135  Tue Jan 17 14:54:17 PST 2017
audit: type=1400 audit(1524010183.942:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=708 comm="apparmor_parser"
audit: type=1400 audit(1524010183.982:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=715 comm="apparmor_parser"
audit: type=1400 audit(1524010184.034:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=716 comm="apparmor_parser"
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
audit: type=1400 audit(1524010184.162:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=718 comm="apparmor_parser"
Adding 3404796k swap on /dev/sdc5.  Priority:-1 extents:1 across:3404796k FS
zram: Added device: zram0
zram: Added device: zram1
zram0: detected capacity change from 0 to 859365376
Adding 839220k swap on /dev/zram0.  Priority:5 extents:1 across:839220k SSFS
zram1: detected capacity change from 0 to 859365376
Adding 839220k swap on /dev/zram1.  Priority:5 extents:1 across:839220k SSFS
IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
e100 0000:02:08.0 enp2s8: NIC Link is Up 100 Mbps Full Duplex
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s8: link becomes ready
agpgart-intel 0000:00:00.0: AGP 3.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=12078 PROTO=2 
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=64006 PROTO=2 
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=22726 PROTO=2 
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=43921 PROTO=2 
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
audit_printk_skb: 48 callbacks suppressed
audit: type=1400 audit(1524012687.506:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/ntpd" pid=29940 comm="apparmor_parser"
audit: type=1400 audit(1524012694.370:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=30146 comm="apparmor_parser"
audit: type=1400 audit(1524012694.374:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=30146 comm="apparmor_parser"
audit: type=1400 audit(1524012694.374:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=30146 comm="apparmor_parser"
audit: type=1400 audit(1524012694.378:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=30146 comm="apparmor_parser"
audit: type=1400 audit(1524012704.489:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=30486 comm="apparmor_parser"
audit: type=1400 audit(1524012704.489:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=30486 comm="apparmor_parser"
audit: type=1400 audit(1524012704.489:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=30486 comm="apparmor_parser"
audit: type=1400 audit(1524012704.493:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=30486 comm="apparmor_parser"
audit: type=1400 audit(1524012704.789:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=30487 comm="apparmor_parser"
audit: type=1400 audit(1524012704.805:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=30487 comm="apparmor_parser"
audit: type=1400 audit(1524012704.965:39): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=30506 comm="apparmor_parser"
audit: type=1400 audit(1524012705.181:40): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libreoffice-oopslash" pid=30508 comm="apparmor_parser"
audit: type=1400 audit(1524012705.373:41): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libreoffice-senddoc" pid=30510 comm="apparmor_parser"
audit: type=1400 audit(1524012709.470:42): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libreoffice-soffice" pid=30520 comm="apparmor_parser"
audit: type=1400 audit(1524012709.598:43): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libreoffice-xpdfimport" pid=30529 comm="apparmor_parser"
audit: type=1400 audit(1524012710.382:44): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=30531 comm="apparmor_parser"
audit: type=1400 audit(1524012710.402:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=30531 comm="apparmor_parser"
audit: type=1400 audit(1524012710.786:46): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=30533 comm="apparmor_parser"
audit: type=1400 audit(1524012712.166:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=30535 comm="apparmor_parser"
audit: type=1400 audit(1524012712.166:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=30535 comm="apparmor_parser"
audit: type=1400 audit(1524012712.182:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=30535 comm="apparmor_parser"
audit: type=1400 audit(1524012712.330:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/ippusbxd" pid=30537 comm="apparmor_parser"
audit: type=1400 audit(1524012712.718:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/ntpd" pid=30539 comm="apparmor_parser"
audit: type=1400 audit(1524012713.198:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/tcpdump" pid=30543 comm="apparmor_parser"
audit_printk_skb: 18 callbacks suppressed
audit: type=1400 audit(1524012719.807:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=30629 comm="apparmor_parser"
audit: type=1400 audit(1524012719.819:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=30629 comm="apparmor_parser"
audit: type=1400 audit(1524012719.819:61): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//snap_update_ns" pid=30629 comm="apparmor_parser"
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=34844 PROTO=2 
audit: type=1400 audit(1524012807.916:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libreoffice-oopslash" pid=12247 comm="apparmor_parser"
audit: type=1400 audit(1524012808.296:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libreoffice-senddoc" pid=12256 comm="apparmor_parser"
audit: type=1400 audit(1524012808.296:64): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=12256 comm="apparmor_parser"
audit: type=1400 audit(1524012809.892:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libreoffice-soffice" pid=12265 comm="apparmor_parser"
audit: type=1400 audit(1524012809.896:66): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=12265 comm="apparmor_parser"
audit: type=1400 audit(1524012810.060:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libreoffice-xpdfimport" pid=12274 comm="apparmor_parser"
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=62963 PROTO=2 
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=47797 PROTO=2 
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=55666 PROTO=2 
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=53125 PROTO=2 
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=21223 PROTO=2 
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=48806 PROTO=2 
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=24149 PROTO=2 
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=54638 PROTO=2 
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=54647 PROTO=2 
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=4577 PROTO=2 
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=37176 PROTO=2 
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=14714 PROTO=2 
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=56332 PROTO=2 
[UFW BLOCK] IN=enp2s8 OUT= MAC=01:00:5e:00:00:fb:cc:08:8d:04:2a:30:08:00 SRC=192.168.1.196 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=4058 PROTO=2 

Return To asdf System Information