dmesg - 1080gt640x965
Linux version 4.16.1-gentoo (root@sal-9000) (gcc version 7.3.0 (Gentoo 7.3.0-r1 p1.1)) #3 SMP Sat Apr 14 04:13:23 CDT 2018
KERNEL supported cpus:
AMD AuthenticAMD
x86/fpu: x87 FPU will use FXSAVE
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009afff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfd9ffff] usable
BIOS-e820: [mem 0x00000000bfda0000-0x00000000bfdd0fff] ACPI NVS
BIOS-e820: [mem 0x00000000bfdd1000-0x00000000bfdfffff] ACPI data
BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-970A-UD3/GA-970A-UD3, BIOS F8f 12/16/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BFE00000 mask FFFFFFE00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000240000000 aka 9216M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbfda0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4c60-0x000f4c6f] mapped at [ (ptrval)]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 95000 size 24576
Using GB pages for direct mapping
BRK [0x02933000, 0x02933fff] PGTABLE
BRK [0x02934000, 0x02934fff] PGTABLE
BRK [0x02935000, 0x02935fff] PGTABLE
RAMDISK: [mem 0x37cdd000-0x37e65fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6B80 000014 (v00 GBT )
ACPI: RSDT 0x00000000BFDD1000 00004C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000BFDD1080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000BFDD1100 00792A (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 0x00000000BFDA0000 000040
ACPI: SSDT 0x00000000BFDD8B00 00088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: MSDM 0x00000000BFDD93C0 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 0x00000000BFDD9440 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000BFDD9480 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 0x00000000BFDD9500 000034 (v01 GBT 00000000 00000000)
ACPI: TAMG 0x00000000BFDD9570 000202 (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 0x00000000BFDD8A40 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 0x00000000BFDD9780 0061FE (v01 MATS RCM 80000001 INTL 20061109)
ACPI: IVRS 0x00000000BFDDF9F0 0000D8 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
NODE_DATA(0) allocated [mem 0x23fffa000-0x23fffdfff]
tsc: Fast TSC calibration using PIT
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009afff]
node 0: [mem 0x0000000000100000-0x00000000bfd9ffff]
node 0: [mem 0x0000000100000000-0x000000023fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
On node 0 totalpages: 2096442
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3994 pages, LIFO batch:0
DMA32 zone: 12215 pages used for memmap
DMA32 zone: 781728 pages, LIFO batch:31
Normal zone: 20480 pages used for memmap
Normal zone: 1310720 pages, LIFO batch:31
Reserved but unavailable: 102 pages
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbfda0000-0xbfdd0fff]
PM: Registered nosave memory: [mem 0xbfdd1000-0xbfdfffff]
PM: Registered nosave memory: [mem 0xbfe00000-0xbfefffff]
PM: Registered nosave memory: [mem 0xbff00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xbff00000-0xdfffffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 38 pages/cpu @ (ptrval) s118616 r8192 d28840 u262144
pcpu-alloc: s118616 r8192 d28840 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 2063662
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8159964K/8385768K available (12300K kernel code, 1237K rwdata, 3348K rodata, 1180K init, 672K bss, 225804K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
ACPI: Core revision 20180105
ACPI: 2 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 3422.571 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3155989f3f5, max_idle_ns: 440795336842 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6845.14 BogoMIPS (lpj=3422571)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
Freeing SMP alternatives memory: 40K
process: System has AMD C1E enabled
process: Switch to broadcast mode on CPU0
smpboot: CPU0: AMD Phenom(tm) II X4 965 Processor (family: 0x10, model: 0x4, stepping: 0x3)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Hierarchical SRCU implementation.
MCE: In-kernel MCE decoding enabled.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
do_IRQ: 1.55 No irq handler for vector
process: Switch to broadcast mode on CPU1
#2
do_IRQ: 2.55 No irq handler for vector
process: Switch to broadcast mode on CPU2
#3
do_IRQ: 3.55 No irq handler for vector
process: Switch to broadcast mode on CPU3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 4 processors activated (27380.56 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbfda0000-0xbfdd0fff] (200704 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 10:19:41, date: 04/14/18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1523701181.022:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
node 0 link 0: io port [9000, ffff]
TOM: 00000000c0000000 aka 3072M
Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c0000000, dfffffff]
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff]
TOM2: 0000000240000000 aka 9216M
bus: [bus 00-06] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xc0000000-0xdfffffff]
bus: 00 [mem 0xe0700000-0xffffffff]
bus: 00 [mem 0xe0100000-0xe06fffff]
bus: 00 [mem 0x240000000-0xfcffffffff]
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI Error: Could not find/resolve named package element: LNKC (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKD (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKA (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKB (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKD (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKA (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKB (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKC (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKA (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKB (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKC (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKD (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKB (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKC (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKD (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKA (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKC (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKD (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKA (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKB (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKD (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKA (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKB (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKC (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKB (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKC (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKD (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKA (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKC (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKD (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKA (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKB (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKD (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKA (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKB (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKC (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKA (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKB (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKC (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKD (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKB (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKC (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKD (20180105/dspkginit-384)
ACPI Error: Could not find/resolve named package element: LNKA (20180105/dspkginit-384)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 9 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: enabling Extended Tags
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: enabling Extended Tags
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: enabling Extended Tags
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: enabling Extended Tags
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 0x24: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfdffe000-0xfdffefff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfdffd000-0xfdffd0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfdffc000-0xfdffcfff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfdffb000-0xfdffb0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfdffa000-0xfdffafff]
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: enabling Extended Tags
pci 0000:00:15.0: supports D1 D2
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfdff9000-0xfdff9fff]
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfdff8000-0xfdff80ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [10de:0fc1] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xde000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xcf00-0xcf7f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfd9f8000-0xfd9fffff 64bit]
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:04.0: bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:04.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xee00-0xeeff]
pci 0000:03:00.0: reg 0x18: [mem 0xfdeff000-0xfdefffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xfdef8000-0xfdefbfff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
pci 0000:00:09.0: bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfddf8000-0xfddfffff 64bit]
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 04]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 06]
pci 0000:00:15.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:15.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbfda0000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
FS-Cache: Loaded
pnp: PnP ACPI init
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0220-0x0225] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
system 00:01: [io 0x0900-0x091f] has been reserved
system 00:01: [io 0x0228-0x022f] has been reserved
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c52] has been reserved
system 00:01: [io 0x0c6c-0x0c6d] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x08fe] has been reserved
system 00:01: [io 0x0a10-0x0a17] has been reserved
system 00:01: [io 0x0b00-0x0b0f] has been reserved
system 00:01: [io 0x0b10-0x0b1f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0x000d5c00-0x000d7fff] has been reserved
system 00:04: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:04: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:04: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:04: [mem 0xbfda0000-0xbfdfffff] could not be reserved
system 00:04: [mem 0xffff0000-0xffffffff] has been reserved
system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:04: [mem 0x00100000-0xbfd9ffff] could not be reserved
system 00:04: [mem 0xbfe00000-0xbfefffff] has been reserved
system 00:04: [mem 0xbff00000-0xbfffffff] could not be reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:04: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc07ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:04.0: bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:04.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
pci 0000:00:09.0: bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:00:0a.0: PCI bridge to [bus 04]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 05]
pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
pci 0000:00:15.0: PCI bridge to [bus 06]
pci 0000:00:15.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:15.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xfd900000-0xfd9fffff]
pci_bus 0000:02: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfd500000-0xfd5fffff]
pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:05: resource 2 [mem 0xfda00000-0xfdafffff pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:05: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:05: resource 9 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:06: resource 1 [mem 0xfd800000-0xfd8fffff]
pci_bus 0000:06: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1572K
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: no GSI
iommu: Adding device 0000:00:00.0 to group 0
iommu: Adding device 0000:00:02.0 to group 1
iommu: Adding device 0000:00:04.0 to group 2
iommu: Adding device 0000:00:09.0 to group 3
iommu: Adding device 0000:00:0a.0 to group 4
iommu: Adding device 0000:00:11.0 to group 5
iommu: Adding device 0000:00:12.0 to group 6
iommu: Adding device 0000:00:12.2 to group 6
iommu: Adding device 0000:00:13.0 to group 7
iommu: Adding device 0000:00:13.2 to group 7
iommu: Adding device 0000:00:14.0 to group 8
iommu: Adding device 0000:00:14.1 to group 9
iommu: Adding device 0000:00:14.2 to group 10
iommu: Adding device 0000:00:14.3 to group 11
iommu: Adding device 0000:00:14.4 to group 12
iommu: Adding device 0000:00:14.5 to group 13
iommu: Adding device 0000:00:15.0 to group 14
iommu: Adding device 0000:00:16.0 to group 15
iommu: Adding device 0000:00:16.2 to group 15
iommu: Adding device 0000:01:00.0 to group 16
iommu: Adding device 0000:01:00.1 to group 16
iommu: Adding device 0000:02:00.0 to group 17
iommu: Adding device 0000:03:00.0 to group 18
iommu: Adding device 0000:04:00.0 to group 19
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Lazy IO/TLB flushing enabled
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=56 max_order=21 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
ntfs: driver 2.1.32 [Flags: R/W].
fuse init (API version 7.26)
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: ACPI: processor limited to max C-state 1
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
tun: Universal TUN/TAP device driver, 1.6
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0x000000003cfa6489, 90:2b:34:91:49:b8, XID 0c900800 IRQ 25
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfdffd000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.16.1-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfdffb000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.16.1-gentoo ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfdff8000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.16.1-gentoo ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfdffe000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.16.1-gentoo ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfdffc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.16.1-gentoo ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfdffa000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.16.1-gentoo ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 18, io mem 0xfdff9000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.16.1-gentoo ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:02:00.0: hcc params 0x040040a5 hci version 0x100 quirks 0x00080490
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.16.1-gentoo xhci-hcd
usb usb8: SerialNumber: 0000:02:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 4.16.1-gentoo xhci-hcd
usb usb9: SerialNumber: 0000:02:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:04:00.0: hcc params 0x040040a5 hci version 0x100 quirks 0x00080490
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 4.16.1-gentoo xhci-hcd
usb usb10: SerialNumber: 0000:04:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11
usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 4.16.1-gentoo xhci-hcd
usb usb11: SerialNumber: 0000:04:00.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usb-storage
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
ata3.00: ATAPI: HL-DT-ST BD-RE WH14NS40, 1.00, max UDMA/100
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE WH14NS40 1.00 PQ: 0 ANSI: 5
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sr 2:0:0:0: [sr0] scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
snd_hda_intel 0000:01:00.1: Disabling MSI
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x010000c8
microcode: CPU1: patch_level=0x010000c8
microcode: CPU2: patch_level=0x010000c8
microcode: CPU3: patch_level=0x010000c8
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1157587931, 0)->(1292891925, -135303994)
registered taskstats version 1
Loading compiled-in X.509 certificates
Magic number: 14:369:325
console [netcon0] enabled
netconsole: network logging started
acpi_cpufreq: overriding BIOS provided _PSD data
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line
cfg80211: failed to load regulatory.db
snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA device list:
snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
No soundcards found.
snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_generic hdaudioC0D0: dig-out=0x2d/0x2e
snd_hda_codec_generic hdaudioC0D0: inputs:
snd_hda_codec_generic hdaudioC0D0: Front Mic=0x29
snd_hda_codec_generic hdaudioC0D0: Rear Mic=0x2b
snd_hda_codec_generic hdaudioC0D0: Line=0x2a
Freeing unused kernel memory: 1180K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2004K
Freeing unused kernel memory: 748K
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
usb 8-1: new high-speed USB device number 2 using xhci_hcd
usb 4-5: new full-speed USB device number 2 using ohci-pci
usb 7-3: new full-speed USB device number 2 using ohci-pci
snd_hda_codec_generic hdaudioC1D0: ignore pin 0x6, too many assigned pins
snd_hda_codec_generic hdaudioC1D0: ignore pin 0x7, too many assigned pins
snd_hda_codec_generic hdaudioC1D0: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_generic hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_generic hdaudioC1D0: dig-out=0x4/0x5
snd_hda_codec_generic hdaudioC1D0: inputs:
usb 8-1: New USB device found, idVendor=05e3, idProduct=0610
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: USB2.0 Hub
usb 8-1: Manufacturer: GenesysLogic
hub 8-1:1.0: USB hub found
hub 8-1:1.0: 4 ports detected
usb 4-5: New USB device found, idVendor=046d, idProduct=c534
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-5: Product: USB Receiver
usb 4-5: Manufacturer: Logitech
input: HDA NVidia HDMI as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
input: HDA NVidia HDMI as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
usb 7-3: New USB device found, idVendor=15e4, idProduct=0035
usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-3: Product: MixTrack Pro 3
usb 7-3: Manufacturer: Numark
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/0003:046D:C534.0001/input/input13
hid-generic 0003:15E4:0035.0002: hiddev96,hidraw0: USB HID v1.00 Device [Numark MixTrack Pro 3] on usb-0000:00:16.0-3/input3
usb 9-1: new SuperSpeed USB device number 2 using xhci_hcd
hid-generic 0003:046D:C534.0001: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-5/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/0003:046D:C534.0003/input/input14
usb 9-1: New USB device found, idVendor=05e3, idProduct=0617
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-1: Product: USB3.0 Hub
usb 9-1: Manufacturer: GenesysLogic
hub 9-1:1.0: USB hub found
hub 9-1:1.0: 4 ports detected
hid-generic 0003:046D:C534.0003: input,hiddev97,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-5/input1
tsc: Refined TSC clocksource calibration: 3422.912 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3156db4f434, max_idle_ns: 440795375089 ns
clocksource: Switched to clocksource tsc
usb 8-1.1: new high-speed USB device number 3 using xhci_hcd
usb 8-1.1: New USB device found, idVendor=05e3, idProduct=0610
usb 8-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1.1: Product: USB2.0 Hub
usb 8-1.1: Manufacturer: GenesysLogic
hub 8-1.1:1.0: USB hub found
hub 8-1.1:1.0: 4 ports detected
usb 9-1.1: new SuperSpeed USB device number 3 using xhci_hcd
usb 9-1.1: New USB device found, idVendor=05e3, idProduct=0617
usb 9-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-1.1: Product: USB3.0 Hub
usb 9-1.1: Manufacturer: GenesysLogic
hub 9-1.1:1.0: USB hub found
hub 9-1.1:1.0: 4 ports detected
usb 8-1.4: new full-speed USB device number 4 using xhci_hcd
EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities
usb 8-1.4: New USB device found, idVendor=10c4, idProduct=ea60
usb 8-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1.4: Product: CP2102 USB to UART Bridge Controller
usb 8-1.4: Manufacturer: Silicon Labs
usb 8-1.4: SerialNumber: 0001
usb 8-1.4: Not enough bandwidth for new device state.
usb 8-1.4: can't set config #1, error -28
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
usb 7-4: new full-speed USB device number 3 using ohci-pci
usb 7-4: New USB device found, idVendor=0c76, idProduct=1690
usb 7-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 7-4: Product: USB PnP Device(Echo-058)
input: USB PnP Device(Echo-058) as /devices/pci0000:00/0000:00:16.0/usb7/7-4/7-4:1.2/0003:0C76:1690.0004/input/input15
hid-generic 0003:0C76:1690.0004: input,hidraw3: USB HID v1.00 Device [USB PnP Device(Echo-058)] on usb-0000:00:16.0-4/input2
random: crng init done
systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL -XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Huge Pages File System...
usb 8-1.1.1: new full-speed USB device number 5 using xhci_hcd
usb 8-1.1.1: New USB device found, idVendor=1532, idProduct=0040
usb 8-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1.1.1: Product: Razer Naga 2014
usb 8-1.1.1: Manufacturer: Razer
usb 8-1.1.1: Not enough bandwidth for new device state.
usb 8-1.1.1: can't set config #1, error -28
it87: Found IT8720F chip at 0x228, revision 8
it87: VID is disabled (pins used for GPIO)
it87: Routing internal VCCH5V to in7
it87: Beeping is supported
EXT4-fs (sda3): re-mounted. Opts: (null)
systemd-journald[3315]: Received request to flush runtime journal from PID 1
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20180105/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
usb 7-4: Warning! Unlikely big volume range (=496), cval->res is probably wrong.
usb 7-4: [50] FU [Mic Capture Volume] ch = 1, val = 0/7936/16
usbcore: registered new interface driver snd-usb-audio
input: PC Speaker as /devices/platform/pcspkr/input/input16
Adding 6291452k swap on /dev/sda2. Priority:-2 extents:1 across:6291452k
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia-nvlink: Nvlink Core is being initialized, major device number 247
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 396.18 Thu Apr 5 23:41:55 PDT 2018 (using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 396.18 Thu Apr 5 23:35:50 PDT 2018
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
caller _nv001112rm+0xe3/0x1d0 [nvidia] mapping multiple BARs
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
caller _nv001112rm+0xe3/0x1d0 [nvidia] mapping multiple BARs
nvidia-modeset: Allocated GPU:0 (GPU-32ed60c0-7444-0e12-7e80-17e16825bd1c) @ PCI:0000:01:00.0
usb 7-3: 1:1: cannot set freq 44100 to ep 0x1
usb 7-3: USB disconnect, device number 2
GpuTest[3170]: segfault at 2d0 ip 00007fc57182ae1e sp 00007ffc27229fe0 error 4 in libpthread-2.26.so[7fc571822000+1b000]
GpuTest[3211]: segfault at 2d0 ip 00007f04259d1e1e sp 00007ffcc621ab00 error 4 in libpthread-2.26.so[7f04259c9000+1b000]
GpuTest[3339]: segfault at 2d0 ip 00007f1c153f3e1e sp 00007ffd3160f4f0 error 4 in libpthread-2.26.so[7f1c153eb000+1b000]
GpuTest[3381]: segfault at 2d0 ip 00007fcd28022e1e sp 00007ffc2b61cf20 error 4 in libpthread-2.26.so[7fcd2801a000+1b000]
GpuTest[3418]: segfault at 2d0 ip 00007fb69dfa9e1e sp 00007ffc133e0340 error 4 in libpthread-2.26.so[7fb69dfa1000+1b000]
GpuTest[3456]: segfault at 2d0 ip 00007fc68694fe1e sp 00007ffd66b94dd0 error 4 in libpthread-2.26.so[7fc686947000+1b000]
GpuTest[3513]: segfault at 2d0 ip 00007f24d1504e1e sp 00007ffdb1d4c160 error 4 in libpthread-2.26.so[7f24d14fc000+1b000]
GpuTest[3549]: segfault at 2d0 ip 00007f71dbe17e1e sp 00007ffffb296320 error 4 in libpthread-2.26.so[7f71dbe0f000+1b000]
GpuTest[3585]: segfault at 2d0 ip 00007f11600eee1e sp 00007ffe0c54a470 error 4 in libpthread-2.26.so[7f11600e6000+1b000]
GpuTest[3622]: segfault at 2d0 ip 00007f45d1c33e1e sp 00007ffcc18a0d00 error 4 in libpthread-2.26.so[7f45d1c2b000+1b000]
GpuTest[3659]: segfault at 2d0 ip 00007fe24812be1e sp 00007ffea9001490 error 4 in libpthread-2.26.so[7fe248123000+1b000]
GpuTest[3706]: segfault at 2d0 ip 00007f6532948e1e sp 00007fffb9e2ad30 error 4 in libpthread-2.26.so[7f6532940000+1b000]
GpuTest[3758]: segfault at 2d0 ip 00007fea57e88e1e sp 00007ffcef7f2810 error 4 in libpthread-2.26.so[7fea57e80000+1b000]
GpuTest[3794]: segfault at 2d0 ip 00007fd61bb75e1e sp 00007ffc88a715f0 error 4 in libpthread-2.26.so[7fd61bb6d000+1b000]
GpuTest[3992]: segfault at 2d0 ip 00007fa843cf8e1e sp 00007ffd9f043ec0 error 4 in libpthread-2.26.so[7fa843cf0000+1b000]
GpuTest[4030]: segfault at 2d0 ip 00007fea8f1d1e1e sp 00007ffe7c43d510 error 4 in libpthread-2.26.so[7fea8f1c9000+1b000]
GpuTest[4066]: segfault at 2d0 ip 00007fef3d1ebe1e sp 00007ffe4706dee0 error 4 in libpthread-2.26.so[7fef3d1e3000+1b000]
GpuTest[4106]: segfault at 2d0 ip 00007fac31adee1e sp 00007ffdff77a4f0 error 4 in libpthread-2.26.so[7fac31ad6000+1b000]
GpuTest[4150]: segfault at 2d0 ip 00007f27a6406e1e sp 00007ffeda1fbb40 error 4 in libpthread-2.26.so[7f27a63fe000+1b000]
GpuTest[4209]: segfault at 2d0 ip 00007fbce0917e1e sp 00007ffee11eab80 error 4 in libpthread-2.26.so[7fbce090f000+1b000]