dmesg - net
random: get_random_bytes called from start_kernel+0x42/0x50d with crng_init=0
Linux version 4.13.0-37-generic (buildd@lcy01-amd64-012) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #42~16.04.1-Ubuntu SMP Wed Mar 7 16:03:28 UTC 2018 (Ubuntu 4.13.0-37.42~16.04.1-generic 4.13.13)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: x87 FPU will use FXSAVE
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfeaffff] usable
BIOS-e820: [mem 0x00000000bfeb0000-0x00000000bfecbfff] ACPI data
BIOS-e820: [mem 0x00000000bfecc000-0x00000000bfefffff] ACPI NVS
BIOS-e820: [mem 0x00000000bff00000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 2.4 present.
DMI: LENOVO 7663PJG/7663PJG, BIOS 7LETC9WW (2.29 ) 03/18/2011
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x13c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0C0000000 mask FC0000000 uncachable
1 base 13C000000 mask FFC000000 uncachable
2 base 000000000 mask F00000000 write-back
3 base 100000000 mask FC0000000 write-back
4 base 0BFF00000 mask FFFF00000 uncachable
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
total RAM covered: 4031M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 5 lose cover RAM: 0G
e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbfeb0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f68f0-0x000f68ff] mapped at [ffff9c11400f68f0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9c1140097000] 97000 size 24576
BRK [0x13072a000, 0x13072afff] PGTABLE
BRK [0x13072b000, 0x13072bfff] PGTABLE
BRK [0x13072c000, 0x13072cfff] PGTABLE
BRK [0x13072d000, 0x13072dfff] PGTABLE
BRK [0x13072e000, 0x13072efff] PGTABLE
BRK [0x13072f000, 0x13072ffff] PGTABLE
BRK [0x130730000, 0x130730fff] PGTABLE
BRK [0x130731000, 0x130731fff] PGTABLE
RAMDISK: [mem 0x31e64000-0x34f29fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F68C0 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BFEBB496 00009C (v01 LENOVO TP-7U 00002290 LTP 00000000)
ACPI: FACP 0x00000000BFEBB600 0000F4 (v03 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20170531/tbfadt-603)
ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20170531/tbfadt-658)
ACPI: DSDT 0x00000000BFEBBA1D 01003C (v01 LENOVO TP-7U 00002290 MSFT 03000000)
ACPI: FACS 0x00000000BFEE4000 000040
ACPI: FACS 0x00000000BFEE4000 000040
ACPI: SSDT 0x00000000BFEBB7B4 000269 (v01 LENOVO TP-7U 00002290 MSFT 03000000)
ACPI: ECDT 0x00000000BFECBA59 000052 (v01 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI: TCPA 0x00000000BFECBAAB 000032 (v02 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI: APIC 0x00000000BFECBADD 000068 (v01 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI: MCFG 0x00000000BFECBB45 00003C (v01 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI: HPET 0x00000000BFECBB81 000038 (v01 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI: SLIC 0x00000000BFECBBB9 000176 (v01 LENOVO TP-7U 00002290 LTP 00000000)
ACPI: SLAC 0x00000000BFECBDF0 000176 (v01 LENOVO TP-7U 00002290 LTP 00000000)
ACPI: BOOT 0x00000000BFECBF66 000028 (v01 LENOVO TP-7U 00002290 LTP 00000001)
ACPI: ASF! 0x00000000BFECBF8E 000072 (v16 LENOVO TP-7U 00002290 PTL 00000001)
ACPI: SSDT 0x00000000BFEE271B 00025F (v01 LENOVO TP-7U 00002290 INTL 20050513)
ACPI: SSDT 0x00000000BFEE297A 0000A6 (v01 LENOVO TP-7U 00002290 INTL 20050513)
ACPI: SSDT 0x00000000BFEE2A20 0004F7 (v01 LENOVO TP-7U 00002290 INTL 20050513)
ACPI: SSDT 0x00000000BFEE2F17 0001D8 (v01 LENOVO TP-7U 00002290 INTL 20050513)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013bffffff]
NODE_DATA(0) allocated [mem 0x13bfd5000-0x13bffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000013bffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000bfeaffff]
node 0: [mem 0x0000000100000000-0x000000013bffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000013bffffff]
On node 0 totalpages: 1031756
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12219 pages used for memmap
DMA32 zone: 782000 pages, LIFO batch:31
Normal zone: 3840 pages used for memmap
Normal zone: 245760 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
PM: Registered nosave memory: [mem 0x000d4000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbfeb0000-0xbfecbfff]
PM: Registered nosave memory: [mem 0xbfecc000-0xbfefffff]
PM: Registered nosave memory: [mem 0xbff00000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed13fff]
PM: Registered nosave memory: [mem 0xfed14000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xc0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
percpu: Embedded 45 pages/cpu @ffff9c127bc00000 s146520 r8192 d29608 u1048576
pcpu-alloc: s146520 r8192 d29608 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1015612
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3919048K/4127024K available (12300K kernel code, 2481K rwdata, 4008K rodata, 2364K init, 2368K bss, 207976K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 37832 entries in 148 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2493.712 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.42 BogoMIPS (lpj=9974848)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
FEATURE SPEC_CTRL Not Present
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Spectre V2 mitigation: Mitigation: Full generic retpoline
Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 1
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz (family: 0x6, model: 0x17, stepping: 0x6)
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 413038 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
smp: Brought up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (9974.84 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbfecc000-0xbfefffff] (212992 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 18:57:34, date: 03/14/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
Simple Boot Flag at 0x35 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \: Used as first EC
ACPI: \: GPE=0x12, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \: Used as boot ECDT EC to handle transactions
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C127652D400 000306 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C127713D000 00085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C1276512400 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C12765AE900 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 5 GPEs in block 00 to 1F
ACPI: Power Resource [PUBS] (on)
acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1049] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfe200000-0xfe21ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfe225000-0xfe225fff]
pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x1860-0x187f]
pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x1880-0x189f]
pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfe226c00-0xfe226fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfe220000-0xfe223fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x18a0-0x18bf]
pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x18c0-0x18df]
pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x18e0-0x18ff]
pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfe227000-0xfe2273ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2811] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x20: [io 0x1830-0x183f]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x1c48-0x1c4f]
pci 0000:00:1f.2: reg 0x14: [io 0x1c1c-0x1c1f]
pci 0000:00:1f.2: reg 0x18: [io 0x1c40-0x1c47]
pci 0000:00:1f.2: reg 0x1c: [io 0x1c18-0x1c1b]
pci 0000:00:1f.2: reg 0x20: [io 0x1c20-0x1c3f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfe226000-0xfe2267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfe227400-0xfe2274ff]
pci 0000:00:1f.3: reg 0x20: [io 0x1c60-0x1c7f]
pci 0000:01:00.0: [10de:0429] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd6000000-0xd6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd4000000-0xd5ffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd6ffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
pci 0000:03:00.0: [8086:24fd] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xdf2fe000-0xdf2fffff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xdc100000-0xdf2fffff]
pci 0000:00:1c.1: bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
pci 0000:00:1c.2: bridge window [mem 0xdfa00000-0xdfafffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd1ffffff]
pci 0000:00:1c.3: bridge window [mem 0xdf700000-0xdf7fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.4: bridge window [mem 0xcc000000-0xcdffffff]
pci 0000:00:1c.4: bridge window [mem 0xdf400000-0xdf4fffff 64bit pref]
pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
pci 0000:15:00.0: reg 0x10: [mem 0xf8100000-0xf8100fff]
pci 0000:15:00.0: supports D1 D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.1: [1180:0832] type 00 class 0x0c0010
pci 0000:15:00.1: reg 0x10: [mem 0xf8101000-0xf81017ff]
pci 0000:15:00.1: supports D1 D2
pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x8000-0xbfff]
pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xfbffffff]
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
ACPI: EC: EC stopped
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x12, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot ECDT EC to handle transactions and events
ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x12, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbfeb0000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1180-0x11bf] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x165f] could not be reserved
system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: BAR 6: no space for [mem size 0x00020000 pref]
pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd6ffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xdc100000-0xdf2fffff]
pci 0000:00:1c.1: bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
pci 0000:00:1c.2: bridge window [mem 0xdfa00000-0xdfafffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd1ffffff]
pci 0000:00:1c.3: bridge window [mem 0xdf700000-0xdf7fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.4: bridge window [mem 0xcc000000-0xcdffffff]
pci 0000:00:1c.4: bridge window [mem 0xdf400000-0xdf4fffff 64bit pref]
pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref]
pci 0000:15:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff]
pci 0000:15:00.0: BAR 13: assigned [io 0x8000-0x80ff]
pci 0000:15:00.0: BAR 14: assigned [io 0x8400-0x84ff]
pci 0000:15:00.0: CardBus bridge to [bus 16-17]
pci 0000:15:00.0: bridge window [io 0x8000-0x80ff]
pci 0000:15:00.0: bridge window [io 0x8400-0x84ff]
pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref]
pci 0000:15:00.0: bridge window [mem 0xc0000000-0xc3ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 15-18]
pci 0000:00:1e.0: bridge window [io 0x8000-0xbfff]
pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xfbffffff]
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xd4000000-0xd6ffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfdffffff]
pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xdc100000-0xdf2fffff]
pci_bus 0000:03: resource 2 [mem 0xdfd00000-0xdfdfffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff]
pci_bus 0000:04: resource 2 [mem 0xdfa00000-0xdfafffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd1ffffff]
pci_bus 0000:05: resource 2 [mem 0xdf700000-0xdf7fffff 64bit pref]
pci_bus 0000:0d: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:0d: resource 1 [mem 0xcc000000-0xcdffffff]
pci_bus 0000:0d: resource 2 [mem 0xdf400000-0xdf4fffff 64bit pref]
pci_bus 0000:15: resource 0 [io 0x8000-0xbfff]
pci_bus 0000:15: resource 1 [mem 0xf8100000-0xfbffffff]
pci_bus 0000:15: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:15: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:15: resource 9 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:15: resource 10 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:16: resource 0 [io 0x8000-0x80ff]
pci_bus 0000:16: resource 1 [io 0x8400-0x84ff]
pci_bus 0000:16: resource 2 [mem 0xf4000000-0xf7ffffff pref]
pci_bus 0000:16: resource 3 [mem 0xc0000000-0xc3ffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 49944K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbeb0000-0xbfeb0000] (64MB) mapped at [ffff9c11fbeb0000-ffff9c11ffeaffff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f205f541e, max_idle_ns: 440795318851 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1521053855.075:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: Signaling PME with IRQ 24
pcieport 0000:00:1c.0: Signaling PME with IRQ 25
pcieport 0000:00:1c.1: Signaling PME with IRQ 26
pcieport 0000:00:1c.2: Signaling PME with IRQ 27
pcieport 0000:00:1c.3: Signaling PME with IRQ 28
pcieport 0000:00:1c.4: Signaling PME with IRQ 29
pciehp 0000:00:01.0:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep-
pciehp 0000:00:1c.0:pcie004: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.1:pcie004: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.2:pcie004: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.3:pcie004: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.4:pcie004: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
vesafb: mode is 1280x800x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd5000000, mapped to 0xffffbc0c80c00000, using 4032k, total 4032k
Console: switching to colour frame buffer device 160x50
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (54 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (44 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ata2: port disabled--ignoring
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 22, io mem 0xfe226c00
ACPI: Battery Slot [BAT0] (battery present)
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.0-37-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 19, io mem 0xfe227000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.0-37-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.13.0-37-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.13.0-37-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.13.0-37-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.13.0-37-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.13.0-37-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x10676, pf=0x80, revision=0x60f
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 039842e4c5826cfde4aee35bb7ba969e0b39b60f'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 10:385:999
system 00:01: hash matches
pnp0: hash matches
rtc_cmos 00:02: setting system clock to 2018-03-14 18:57:35 UTC (1521053855)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata1.00: ATAPI: MATSHITADVD-RAM UJ-862, RB01, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-862 RB01 PQ: 0 ANSI: 5
sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 2364K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2024K
Freeing unused kernel memory: 88K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
acpi device:06: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input5
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
pci 0000:00:1e.0: enabling device (0005 -> 0007)
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 30
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 30
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
checking generic (d5000000 3f0000) vs hw (e0000000 10000000)
checking generic (d5000000 3f0000) vs hw (d4000000 2000000)
fb: switching to nouveaufb from VESA VGA
Console: switching to colour dummy device 80x25
nouveau 0000:01:00.0: NVIDIA G86 (086900a2)
firewire_ohci 0000:15:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
nouveau 0000:01:00.0: bios: version 60.86.3e.00.00
nouveau 0000:01:00.0: fb: 128 MiB GDDR3
[TTM] Zone kernel: Available graphics memory: 1986752 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:01:00.0: DRM: VRAM: 128 MiB
nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.0
nouveau 0000:01:00.0: DRM: DCB outp 00: 01000323 00010034
nouveau 0000:01:00.0: DRM: DCB outp 01: 02811300 00000028
nouveau 0000:01:00.0: DRM: DCB outp 02: 02822312 00010030
nouveau 0000:01:00.0: DRM: DCB outp 03: 014333f1 0080c080
nouveau 0000:01:00.0: DRM: DCB conn 00: 0040
nouveau 0000:01:00.0: DRM: DCB conn 01: 0100
nouveau 0000:01:00.0: DRM: DCB conn 02: 1231
nouveau 0000:01:00.0: DRM: DCB conn 03: 0311
nouveau 0000:01:00.0: DRM: failed to create encoder 0/1/0: -19
nouveau 0000:01:00.0: DRM: TV-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
usb 3-1: new full-speed USB device number 2 using uhci_hcd
nouveau 0000:01:00.0: DRM: allocated 1440x900 fb: 0x50000, bo ffff9c126adcc000
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 180x56
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:25:7a:95:71
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: 1008FF-0FF
e1000e 0000:00:19.0 enp0s25: renamed from eth0
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: disabling queued TRIM support
ata3.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: disabling queued TRIM support
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 2:0:0:0: [sda] supports TCG Opal
sd 2:0:0:0: [sda] Attached SCSI disk
usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: BCM2045B
usb 3-1: Manufacturer: Broadcom Corp
firewire_core 0000:15:00.1: created device fw0: GUID 00016c00005cbf03, S400
psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0/0x0, board id: 0, fw id: 67352
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
usb 3-2: new full-speed USB device number 3 using uhci_hcd
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
usb 3-2: New USB device found, idVendor=0483, idProduct=2016
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Biometric Coprocessor
usb 3-2: Manufacturer: STMicroelectronics
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
floppy0: no floppy controllers found
work still pending
raid6: sse2x1 gen() 4222 MB/s
raid6: sse2x1 xor() 4351 MB/s
raid6: sse2x2 gen() 4556 MB/s
raid6: sse2x2 xor() 5287 MB/s
raid6: sse2x4 gen() 7519 MB/s
raid6: sse2x4 xor() 5875 MB/s
raid6: using algorithm sse2x4 gen() 7519 MB/s
raid6: .... xor() 5875 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 10418.000 MB/sec
generic_sse: 9261.000 MB/sec
xor: using function: prefetch64-sse (10418.000 MB/sec)
Btrfs loaded, crc32c=crc32c-generic
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Audit Socket.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[315]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB.PCI0.LPC.PMIO) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB.PCI0.LPC.LPIO) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB.PCI0.LPC.LPIO) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-33.ucode failed with error -2
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-32.ucode failed with error -2
yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
iwlwifi 0000:03:00.0: loaded firmware version 31.560484.0 op_mode iwlmvm
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS 7LETC9WW (2.29 ), EC 7KHT24WW-1.08
thinkpad_acpi: Lenovo ThinkPad T61, model 7663PJG
thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thinkpad_acpi: ACPI backlight control delay disabled
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
iwlwifi 0000:03:00.0: base HW address: f8:34:41:dd:b8:be
yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
yenta_cardbus 0000:15:00.0: Socket status: 30000006
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x8000-0xbfff]
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf8100000-0xfbffffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xf8100000-0xfbffffff:
excluding 0xf8100000-0xf84effff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4000000-0xf7ffffff 64bit pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4000000-0xf7ffffff:
excluding 0xf4000000-0xf7ffffff
snd_hda_intel 0000:00:1b.0: probe_mask set to 0x1 for device 17aa:20ac
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal thermal_zone2: failed to read out thermal zone (-5)
iwlwifi 0000:03:00.0 wls3: renamed from wlan0
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xd3fff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
excluding 0xa0000000-0xa0ffffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
excluding 0x60000000-0x60ffffff
intel_powerclamp: No package C-state available
snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1984: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_analog hdaudioC0D0: dig-out=0x1b/0x0
snd_hda_codec_analog hdaudioC0D0: inputs:
snd_hda_codec_analog hdaudioC0D0: Internal Mic=0x15
snd_hda_codec_analog hdaudioC0D0: Mic=0x14
snd_hda_codec_analog hdaudioC0D0: Dock Mic=0x1c
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1521053861.434:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=715 comm="apparmor_parser"
audit: type=1400 audit(1521053861.434:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=715 comm="apparmor_parser"
audit: type=1400 audit(1521053861.434:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=715 comm="apparmor_parser"
audit: type=1400 audit(1521053861.434:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=715 comm="apparmor_parser"
audit: type=1400 audit(1521053861.435:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=714 comm="apparmor_parser"
audit: type=1400 audit(1521053861.435:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=714 comm="apparmor_parser"
audit: type=1400 audit(1521053861.437:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=717 comm="apparmor_parser"
audit: type=1400 audit(1521053861.442:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=718 comm="apparmor_parser"
audit: type=1400 audit(1521053861.442:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=718 comm="apparmor_parser"
audit: type=1400 audit(1521053861.442:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=718 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): wls3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wls3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wls3: link is not ready
floppy0: no floppy controllers found
work still pending
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
wls3: authenticate with d8:fb:5e:8f:d9:ce
wls3: send auth to d8:fb:5e:8f:d9:ce (try 1/3)
wls3: authenticated
wls3: associate with d8:fb:5e:8f:d9:ce (try 1/3)
wls3: RX AssocResp from d8:fb:5e:8f:d9:ce (capab=0x1011 status=0 aid=1)
wls3: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wls3: link becomes ready
wls3: Limiting TX power to 23 (23 - 0) dBm as advertised by d8:fb:5e:8f:d9:ce
random: crng init done
CE: hpet increased min_delta_ns to 20115 nsec
perf: interrupt took too long (2516 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
perf: interrupt took too long (3154 > 3145), lowering kernel.perf_event_max_sample_rate to 63250
perf: interrupt took too long (3960 > 3942), lowering kernel.perf_event_max_sample_rate to 50500
perf: interrupt took too long (4954 > 4950), lowering kernel.perf_event_max_sample_rate to 40250
iwlwifi 0000:03:00.0: Too many chunks: 20
wls3: deauthenticating from d8:fb:5e:8f:d9:ce by local choice (Reason: 3=DEAUTH_LEAVING)
wls3: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Stopping disk
nouveau 0000:01:00.0: DRM: suspending console...
nouveau 0000:01:00.0: DRM: suspending display...
e1000e: EEE TX LPI TIMER: 00000000
nouveau 0000:01:00.0: DRM: evicting buffers...
nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
nouveau 0000:01:00.0: DRM: suspending fence...
nouveau 0000:01:00.0: DRM: suspending object tree...
PM: suspend of devices complete after 4328.351 msecs
PM: late suspend of devices complete after 0.684 msecs
PM: noirq suspend of devices complete after 178.953 msecs
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
IRQ 1: no longer affine to CPU1
IRQ 9: no longer affine to CPU1
IRQ 12: no longer affine to CPU1
IRQ 14: no longer affine to CPU1
IRQ 20: no longer affine to CPU1
IRQ 30: no longer affine to CPU1
IRQ 33: no longer affine to CPU1
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Suspended for 3447.999 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
ACPI: Waking up from system sleep state S3
PM: noirq resume of devices complete after 84.175 msecs
PM: early resume of devices complete after 0.185 msecs
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
ACPI: EC: event unblocked
ata2: port disabled--ignoring
usb usb5: root hub lost power or was reset
usb usb6: root hub lost power or was reset
usb usb7: root hub lost power or was reset
sd 2:0:0:0: [sda] Starting disk
pciehp 0000:00:1c.4:pcie004: Timeout on hotplug command 0x1038 (issued 1418656 msec ago)
pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x1038 (issued 1418656 msec ago)
pciehp 0000:00:1c.2:pcie004: Timeout on hotplug command 0x1038 (issued 1418656 msec ago)
pciehp 0000:00:1c.1:pcie004: Timeout on hotplug command 0x1038 (issued 1418656 msec ago)
pciehp 0000:00:1c.0:pcie004: Timeout on hotplug command 0x1038 (issued 1418656 msec ago)
pciehp 0000:00:1c.1:pcie004: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
pciehp 0000:00:1c.1:pcie004: Cannot add device at 0000:03:00
ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata1.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata1.00: configured for UDMA/33
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: disabling queued TRIM support
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: disabling queued TRIM support
ata3.00: configured for UDMA/133
usb 3-2: reset full-speed USB device number 3 using uhci_hcd
firewire_core 0000:15:00.1: rediscovered device fw0
usb 3-1: reset full-speed USB device number 2 using uhci_hcd
pciehp 0000:00:01.0:pcie004: Device 0000:01:00.0 already exists at 0000:01:00, cannot hot-add
pciehp 0000:00:01.0:pcie004: Cannot add device at 0000:01:00
nouveau 0000:01:00.0: DRM: resuming object tree...
nouveau 0000:01:00.0: DRM: resuming fence...
nouveau 0000:01:00.0: DRM: resuming display...
nouveau 0000:01:00.0: DRM: resuming console...
thinkpad_acpi: ACPI backlight control delay disabled
PM: resume of devices complete after 1519.543 msecs
usb 3-1:1.0: rebind failed: -517
usb 3-1:1.1: rebind failed: -517
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
thermal thermal_zone2: failed to read out thermal zone (-5)
video LNXVIDEO:01: Restoring backlight state
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): wls3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wls3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wls3: link is not ready
wls3: authenticate with d8:fb:5e:8f:d9:ce
wls3: send auth to d8:fb:5e:8f:d9:ce (try 1/3)
wls3: authenticated
wls3: associate with d8:fb:5e:8f:d9:ce (try 1/3)
wls3: RX AssocResp from d8:fb:5e:8f:d9:ce (capab=0x1011 status=0 aid=3)
wls3: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wls3: link becomes ready
wls3: Limiting TX power to 23 (23 - 0) dBm as advertised by d8:fb:5e:8f:d9:ce
nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 5 [chromium-browse[3973]] subc 5 mthd 0200 data 00000001
wls3: deauthenticating from d8:fb:5e:8f:d9:ce by local choice (Reason: 3=DEAUTH_LEAVING)
wls3: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
wls3: authenticate with 50:09:59:f3:d2:89
wls3: send auth to 50:09:59:f3:d2:89 (try 1/3)
wls3: authenticated
wls3: associate with 50:09:59:f3:d2:89 (try 1/3)
wls3: RX AssocResp from 50:09:59:f3:d2:89 (capab=0x1411 status=0 aid=2)
wls3: associated
wls3: Limiting TX power to 20 (20 - 0) dBm as advertised by 50:09:59:f3:d2:89
wls3: deauthenticating from 50:09:59:f3:d2:89 by local choice (Reason: 3=DEAUTH_LEAVING)
wls3: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
wls3: authenticate with d8:fb:5e:8f:d9:ce
wls3: send auth to d8:fb:5e:8f:d9:ce (try 1/3)
wls3: authenticated
wls3: associate with d8:fb:5e:8f:d9:ce (try 1/3)
wls3: RX AssocResp from d8:fb:5e:8f:d9:ce (capab=0x1011 status=0 aid=3)
wls3: associated
wls3: Limiting TX power to 23 (23 - 0) dBm as advertised by d8:fb:5e:8f:d9:ce
wls3: deauthenticating from d8:fb:5e:8f:d9:ce by local choice (Reason: 3=DEAUTH_LEAVING)
wls3: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
IPv6: ADDRCONF(NETDEV_UP): wls3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wls3: link is not ready
wls3: authenticate with d8:fb:5e:8f:d9:ce
wls3: send auth to d8:fb:5e:8f:d9:ce (try 1/3)
wls3: authenticated
wls3: associate with d8:fb:5e:8f:d9:ce (try 1/3)
wls3: RX AssocResp from d8:fb:5e:8f:d9:ce (capab=0x1011 status=0 aid=3)
wls3: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wls3: link becomes ready
wls3: Limiting TX power to 23 (23 - 0) dBm as advertised by d8:fb:5e:8f:d9:ce
wls3: deauthenticating from d8:fb:5e:8f:d9:ce by local choice (Reason: 3=DEAUTH_LEAVING)
wls3: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
wls3: authenticate with 50:09:59:f3:d2:89
wls3: send auth to 50:09:59:f3:d2:89 (try 1/3)
wls3: authenticated
wls3: associate with 50:09:59:f3:d2:89 (try 1/3)
wls3: RX AssocResp from 50:09:59:f3:d2:89 (capab=0x1411 status=0 aid=2)
wls3: associated
wls3: Limiting TX power to 20 (20 - 0) dBm as advertised by 50:09:59:f3:d2:89
wls3: deauthenticating from 50:09:59:f3:d2:89 by local choice (Reason: 3=DEAUTH_LEAVING)
wls3: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
wls3: authenticate with d8:fb:5e:8f:d9:ce
wls3: send auth to d8:fb:5e:8f:d9:ce (try 1/3)
wls3: authenticated
wls3: associate with d8:fb:5e:8f:d9:ce (try 1/3)
wls3: RX AssocResp from d8:fb:5e:8f:d9:ce (capab=0x1011 status=0 aid=3)
wls3: associated
wls3: Limiting TX power to 23 (23 - 0) dBm as advertised by d8:fb:5e:8f:d9:ce