dmesg - core2_test
random: get_random_bytes called from start_kernel+0x42/0x504 with crng_init=0
Linux version 4.13.0-32-generic (buildd@lgw01-amd64-004) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5)) #35~16.04.1-Ubuntu SMP Thu Jan 25 10:13:43 UTC 2018 (Ubuntu 4.13.0-32.35~16.04.1-generic 4.13.13)
Command line: BOOT_IMAGE=/vmlinuz-4.13.0-32-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: x87 FPU will use FXSAVE
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dfedffff] usable
BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfee2fff] ACPI NVS
BIOS-e820: [mem 0x00000000dfee3000-0x00000000dfeeffff] ACPI data
BIOS-e820: [mem 0x00000000dfef0000-0x00000000dfefffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. 965P-DS3/965P-DS3, BIOS F12 05/28/2007
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FE0000000 write-back
3 base 100000000 mask FE0000000 write-back
4 base 0DFF00000 mask FFFF00000 write-through
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5360-0x000f536f] mapped at [ffff8991400f5360]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff899140099000] 99000 size 24576
BRK [0x2b12a000, 0x2b12afff] PGTABLE
BRK [0x2b12b000, 0x2b12bfff] PGTABLE
BRK [0x2b12c000, 0x2b12cfff] PGTABLE
BRK [0x2b12d000, 0x2b12dfff] PGTABLE
BRK [0x2b12e000, 0x2b12efff] PGTABLE
RAMDISK: [mem 0x31fca000-0x34fdcfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6CF0 000014 (v00 GBT )
ACPI: RSDT 0x00000000DFEE3040 000034 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000DFEE30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000DFEE3180 0049F4 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 0x00000000DFEE0000 000040
ACPI: HPET 0x00000000DFEE7CC0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000DFEE7D40 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 0x00000000DFEE7BC0 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
NODE_DATA(0) allocated [mem 0x11ffd1000-0x11fffbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000011fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000dfedffff]
node 0: [mem 0x0000000100000000-0x000000011fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
On node 0 totalpages: 1048190
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14268 pages used for memmap
DMA32 zone: 913120 pages, LIFO batch:31
Normal zone: 2048 pages used for memmap
Normal zone: 131072 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdfee0000-0xdfee2fff]
PM: Registered nosave memory: [mem 0xdfee3000-0xdfeeffff]
PM: Registered nosave memory: [mem 0xdfef0000-0xdfefffff]
PM: Registered nosave memory: [mem 0xdff00000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xdff00000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 45 pages/cpu @ffff89925fc00000 s146520 r8192 d29608 u524288
pcpu-alloc: s146520 r8192 d29608 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031789
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-32-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3985132K/4192760K available (12300K kernel code, 2481K rwdata, 4004K rodata, 2364K init, 2368K bss, 207628K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 37823 entries in 148 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2591.797 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5183.59 BogoMIPS (lpj=10367188)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 1 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
FEATURE SPEC_CTRL Not Present
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz (family: 0x6, model: 0xf, stepping: 0x6)
Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
core: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
smp: Brought up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (10367.18 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee2fff] (12288 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 2:08:37, date: 02/20/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 9 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xdff00000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-3f]
pci 0000:00:00.0: [8086:29a0] type 00 class 0x060000
pci 0000:00:01.0: [8086:29a1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xc000-0xc01f]
pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xc400-0xc41f]
pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfa105000-0xfa1053ff]
pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfa100000-0xfa103fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xc800-0xc81f]
pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xcc00-0xcc1f]
pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xd000-0xd01f]
pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfa104000-0xfa1043ff]
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:2824] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xd400-0xd407]
pci 0000:00:1f.2: reg 0x14: [io 0xd800-0xd803]
pci 0000:00:1f.2: reg 0x18: [io 0xdc00-0xdc07]
pci 0000:00:1f.2: reg 0x1c: [io 0xe000-0xe003]
pci 0000:00:1f.2: reg 0x20: [io 0xe400-0xe41f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfa106000-0xfa1067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfa107000-0xfa1070ff]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:01:00.0: [1002:679a] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf5000000-0xf503ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0x8000-0x80ff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf5040000-0xf5043fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
pci 0000:03:00.0: [197b:2363] type 00 class 0x010601
pci 0000:03:00.0: reg 0x24: [mem 0xf7000000-0xf70001ff]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.1: [197b:0368] type 00 class 0x010185
pci 0000:03:00.1: reg 0x10: [io 0x9000-0x9007]
pci 0000:03:00.1: reg 0x14: [io 0x9400-0x9403]
pci 0000:03:00.1: reg 0x18: [io 0x9800-0x9807]
pci 0000:03:00.1: reg 0x1c: [io 0x9c00-0x9c03]
pci 0000:03:00.1: reg 0x20: [io 0xa000-0xa00f]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0x9000-0xafff]
pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
pci 0000:05:00.0: [11ab:4362] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xf9000000-0xf9003fff 64bit]
pci 0000:05:00.0: reg 0x18: [io 0xb000-0xb0ff]
pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:06:01.0: [168c:0013] type 00 class 0x020000
pci 0000:06:01.0: reg 0x10: [mem 0xfa000000-0xfa00ffff]
pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfa0fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdfee0000-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x0800-0x087f] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [dma 2]
pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:06: [io 0x0400-0x04bf] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x000d3000-0x000d3fff] has been reserved
system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:08: [mem 0xdfee0000-0xdfefffff] could not be reserved
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x00100000-0xdfedffff] could not be reserved
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
system 00:08: [mem 0x000e0000-0x000effff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xfa200000-0xfa3fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xfa400000-0xfa5fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xfa600000-0xfa7fffff 64bit pref]
pci 0000:00:1c.3: BAR 14: assigned [mem 0xfa800000-0xfa9fffff]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xfaa00000-0xfabfffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xfac00000-0xfadfffff 64bit pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.0: bridge window [mem 0xfa200000-0xfa3fffff]
pci 0000:00:1c.0: bridge window [mem 0xfa400000-0xfa5fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xf6000000-0xf600ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0x9000-0xafff]
pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.2: bridge window [mem 0xfa600000-0xfa7fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.3: bridge window [mem 0xfa800000-0xfa9fffff]
pci 0000:00:1c.3: bridge window [mem 0xfaa00000-0xfabfffff 64bit pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.4: bridge window [mem 0xfac00000-0xfadfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 06]
pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfa0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf5ffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:02: resource 1 [mem 0xfa200000-0xfa3fffff]
pci_bus 0000:02: resource 2 [mem 0xfa400000-0xfa5fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x9000-0xafff]
pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf7ffffff]
pci_bus 0000:03: resource 2 [mem 0xfa600000-0xfa7fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:04: resource 1 [mem 0xfa800000-0xfa9fffff]
pci_bus 0000:04: resource 2 [mem 0xfaa00000-0xfabfffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:05: resource 2 [mem 0xfac00000-0xfadfffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfa0fffff]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:06: resource 8 [mem 0xdff00000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue
pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 49228K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdbee0000-0xdfee0000] (64MB) mapped at [ffff89921bee0000-ffff89921fedffff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1519092517.950:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: mode is 1366x768x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffa34381000000, using 4224k, total 4224k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfa105000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfa104000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.0-32-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.13.0-32-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c400
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.13.0-32-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.13.0-32-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.13.0-32-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.13.0-32-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x6f6, pf=0x1, revision=0xc6
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1028242630, 0)->(1135049014, -106806384)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: ea5b2e3dc303efbb5e4e4f76f9dbd395fda5b554'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 6:750:106
rtc_cmos 00:01: setting system clock to 2018-02-20 02:08:38 UTC (1519092518)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2364K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2024K
Freeing unused kernel memory: 92K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
sky2: driver version 1.30
sky2 0000:05:00.0: Yukon-2 EC chip revision 2
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
sky2 0000:05:00.0 eth0: addr 00:16:e6:83:1a:61
scsi host0: pata_jmicron
scsi host1: pata_jmicron
ata1: PATA max UDMA/100 cmd 0x9000 ctl 0x9400 bmdma 0xa000 irq 19
ata2: PATA max UDMA/100 cmd 0x9800 ctl 0x9c00 bmdma 0xa008 irq 19
scsi host2: ahci
sky2 0000:05:00.0 enp5s0: renamed from eth0
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata3: SATA max UDMA/133 abar m2048@0xfa106000 port 0xfa106100 irq 25
ata4: SATA max UDMA/133 abar m2048@0xfa106000 port 0xfa106180 irq 25
ata5: DUMMY
ata6: DUMMY
ata7: SATA max UDMA/133 abar m2048@0xfa106000 port 0xfa106300 irq 25
ata8: SATA max UDMA/133 abar m2048@0xfa106000 port 0xfa106380 irq 25
ahci 0000:03:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi host8: ahci
scsi host9: ahci
ata9: SATA max UDMA/133 abar m512@0xf7000000 port 0xf7000100 irq 26
ata10: SATA max UDMA/133 abar m512@0xf7000000 port 0xf7000180 irq 26
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 420000) vs hw (e0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (TAHITI 0x1002:0x679A 0x174B:0xA003 0x00).
ATOM BIOS: R9
[drm] Changing default dispclk from 500Mhz to 600Mhz
radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used)
radeon 0000:01:00.0: GTT: 2048M 0x00000000C0000000 - 0x000000013FFFFFFF
[drm] Detected VRAM RAM=3072M, BAR=256M
[drm] RAM width 384bits DDR
[TTM] Zone kernel: Available graphics memory: 2019438 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 3072M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading tahiti Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:29a1 = 2032501/0
[drm] radeon: dpm initialized
[drm] Found VCE firmware/feedback version 50.0.1 / 17!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] probing gen 2 caps for device 8086:29a1 = 2032501/0
[drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffff89924f4c0c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffff89924f4c0c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffff89924f4c0c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffff89924f4c0c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffff89924f4c0c10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffa34380c35a18
radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x00000000c0000c18 and cpu addr 0xffff89924f4c0c18
radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x00000000c0000c1c and cpu addr 0xffff89924f4c0c1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
usb 3-1: new low-speed USB device number 2 using uhci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata10.00: supports DRM functions and may not be fully accessible
ata10.00: disabling queued TRIM support
ata10.00: ATA-9: Crucial_CT128MX100SSD1, MU01, max UDMA/133
ata10.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata10.00: supports DRM functions and may not be fully accessible
ata10.00: disabling queued TRIM support
ata10.00: configured for UDMA/133
[drm] ring test on 6 succeeded in 19 usecs
[drm] ring test on 7 succeeded in 4 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
usb 3-1: New USB device found, idVendor=093a, idProduct=2510
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB OPTICAL MOUSE
usb 3-1: Manufacturer: PIXART
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:093A:2510.0001/input/input3
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.0-1/input0
ata4: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 2591.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb5c6a11, max_idle_ns: 440795249002 ns
ata7: SATA link down (SStatus 0 SControl 300)
[drm] ib test on ring 5 succeeded
ata8: SATA link down (SStatus 0 SControl 300)
scsi 9:0:0:0: Direct-Access ATA Crucial_CT128MX1 MU01 PQ: 0 ANSI: 5
ata10.00: Enabling discard_zeroes_data
sd 9:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 9:0:0:0: [sda] 4096-byte physical blocks
sd 9:0:0:0: Attached scsi generic sg0 type 0
sd 9:0:0:0: [sda] Write Protect is off
sd 9:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata10.00: Enabling discard_zeroes_data
sda: sda1 sda2 < sda5 >
ata10.00: Enabling discard_zeroes_data
sd 9:0:0:0: [sda] supports TCG Opal
sd 9:0:0:0: [sda] Attached SCSI disk
[drm] ib test on ring 6 succeeded
clocksource: Switched to clocksource tsc
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD5
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD4
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD3
[drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xE05D8000
[drm] vram apper at 0xE0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[drm] amdgpu kernel modesetting enabled.
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
it87: Found IT8718F chip at 0x290, revision 1
it87: Beeping is supported
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
systemd-journald[253]: Received request to flush runtime journal from PID 1
radeon_dp_aux_transfer_native: 74 callbacks suppressed
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input4
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC883: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f
ath5k 0000:06:01.0: registered as 'phy0'
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
kvm: disabled by bios
kvm: disabled by bios
intel_powerclamp: No package C-state available
intel_powerclamp: No package C-state available
gpio_ich: GPIO from 462 to 511 on gpio_ich
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
Adding 4190204k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:4190204k SSFS
audit: type=1400 audit(1519092528.087:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=669 comm="apparmor_parser"
audit: type=1400 audit(1519092528.087:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=669 comm="apparmor_parser"
audit: type=1400 audit(1519092528.087:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=669 comm="apparmor_parser"
audit: type=1400 audit(1519092528.087:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=669 comm="apparmor_parser"
audit: type=1400 audit(1519092528.089:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=668 comm="apparmor_parser"
audit: type=1400 audit(1519092528.089:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=668 comm="apparmor_parser"
audit: type=1400 audit(1519092528.098:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=672 comm="apparmor_parser"
audit: type=1400 audit(1519092528.098:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=672 comm="apparmor_parser"
audit: type=1400 audit(1519092528.106:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=673 comm="apparmor_parser"
audit: type=1400 audit(1519092528.106:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=673 comm="apparmor_parser"
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ath5k: phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
ath5k 0000:06:01.0 wlp6s1: renamed from wlan0
IPv6: ADDRCONF(NETDEV_UP): wlp6s1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp6s1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
sky2 0000:05:00.0 enp5s0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp6s1: link is not ready
wlp6s1: authenticate with 38:4c:90:9a:14:60
wlp6s1: send auth to 38:4c:90:9a:14:60 (try 1/3)
wlp6s1: authenticated
wlp6s1: associating with AP with corrupt probe response
wlp6s1: associate with 38:4c:90:9a:14:60 (try 1/3)
wlp6s1: RX AssocResp from 38:4c:90:9a:14:60 (capab=0xc31 status=0 aid=5)
wlp6s1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s1: link becomes ready
radeon_dp_aux_transfer_native: 116 callbacks suppressed
random: crng init done
radeon_dp_aux_transfer_native: 158 callbacks suppressed
radeon_dp_aux_transfer_native: 32 callbacks suppressed
radeon_dp_aux_transfer_native: 74 callbacks suppressed
radeon_dp_aux_transfer_native: 32 callbacks suppressed
perf: interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
perf: interrupt took too long (3147 > 3135), lowering kernel.perf_event_max_sample_rate to 63500
radeon_dp_aux_transfer_native: 32 callbacks suppressed
radeon_dp_aux_transfer_native: 74 callbacks suppressed
radeon_dp_aux_transfer_native: 32 callbacks suppressed
perf: interrupt took too long (3934 > 3933), lowering kernel.perf_event_max_sample_rate to 50750
radeon_dp_aux_transfer_native: 32 callbacks suppressed
radeon_dp_aux_transfer_native: 32 callbacks suppressed
do_trap: 13 callbacks suppressed
traps: crafty[5399] trap invalid opcode ip:433703 sp:7ffe508dd660 error:0 in crafty[400000+83000]
traps: crafty[5403] trap invalid opcode ip:433703 sp:7ffcd0e92940 error:0 in crafty[400000+83000]
traps: crafty[5407] trap invalid opcode ip:433703 sp:7ffc0a5663b0 error:0 in crafty[400000+83000]
radeon_dp_aux_transfer_native: 32 callbacks suppressed
radeon_dp_aux_transfer_native: 32 callbacks suppressed
perf: interrupt took too long (4921 > 4917), lowering kernel.perf_event_max_sample_rate to 40500
radeon_dp_aux_transfer_native: 32 callbacks suppressed
radeon_dp_aux_transfer_native: 32 callbacks suppressed
radeon_dp_aux_transfer_native: 32 callbacks suppressed
radeon_dp_aux_transfer_native: 32 callbacks suppressed