dmesg - kernel
microcode: CPU0 microcode updated early to revision 0x4, date = 2013-06-28
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-112-generic (buildd@lgw01-amd64-010) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5) ) #135-Ubuntu SMP Fri Jan 19 11:48:36 UTC 2018 (Ubuntu 4.4.0-112.135-generic 4.4.98)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000ef000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bafcefff] usable
BIOS-e820: [mem 0x00000000bafcf000-0x00000000bb6cefff] reserved
BIOS-e820: [mem 0x00000000bb6cf000-0x00000000bb7cefff] ACPI NVS
BIOS-e820: [mem 0x00000000bb7cf000-0x00000000bb7fefff] ACPI data
BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
BIOS-e820: [mem 0x00000000bb800000-0x00000000bbffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed19000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Hewlett-Packard HP ProBook 6550b/146D, BIOS 68CDE Ver. F.03 10/04/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0BC000000 mask FFC000000 uncachable
4 base 100000000 mask FC0000000 write-back
5 base 138000000 mask FF8000000 uncachable
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
BRK [0x02215000, 0x02215fff] PGTABLE
BRK [0x02216000, 0x02216fff] PGTABLE
BRK [0x02217000, 0x02217fff] PGTABLE
BRK [0x02218000, 0x02218fff] PGTABLE
BRK [0x02219000, 0x02219fff] PGTABLE
RAMDISK: [mem 0x33742000-0x35b98fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F2A80 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000BB7FE120 000084 (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 0x00000000BB7FC000 0000F4 (v03 HPQOEM 146D 0000000F HP 00000001)
ACPI: DSDT 0x00000000BB7D8000 01E923 (v02 HPQOEM 146D 00000001 INTL 20060912)
ACPI: FACS 0x00000000BB76D000 000040
ACPI: FACS 0x00000000BB76D000 000040
ACPI: HPET 0x00000000BB7FB000 000038 (v01 HPQOEM 146D 00000001 HP 00000001)
ACPI: APIC 0x00000000BB7FA000 0000BC (v01 HPQOEM 146D 00000001 HP 00000001)
ACPI: MCFG 0x00000000BB7F9000 00003C (v01 HPQOEM 146D 00000001 HP 00000001)
ACPI: ASF! 0x00000000BB7F8000 0000A0 (v32 HPQOEM 146D 00000001 HP 00000001)
ACPI: TCPA 0x00000000BB7F7000 000032 (v02 HPQOEM 146D 00000000 HP 00000001)
ACPI: SSDT 0x00000000BB7D5000 000135 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
ACPI: SSDT 0x00000000BB7D4000 000314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
ACPI: SLIC 0x00000000BB7D3000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: SSDT 0x00000000BB7D2000 000A10 (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: SSDT 0x00000000BB7D1000 000288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
ACPI: SSDT 0x00000000BB7D0000 000225 (v01 PmRef ApTst 00003000 INTL 20060912)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
NODE_DATA(0) allocated [mem 0x137ff8000-0x137ffcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000000137ffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000bafcefff]
node 0: [mem 0x00000000bb7ff000-0x00000000bb7fffff]
node 0: [mem 0x0000000100000000-0x0000000137ffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000000137ffffff]
On node 0 totalpages: 995182
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 11904 pages used for memmap
DMA32 zone: 761808 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 229376 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000eefff]
PM: Registered nosave memory: [mem 0x000ef000-0x000fffff]
PM: Registered nosave memory: [mem 0xbafcf000-0xbb6cefff]
PM: Registered nosave memory: [mem 0xbb6cf000-0xbb7cefff]
PM: Registered nosave memory: [mem 0xbb7cf000-0xbb7fefff]
PM: Registered nosave memory: [mem 0xbb800000-0xbbffffff]
PM: Registered nosave memory: [mem 0xbc000000-0xbdffffff]
PM: Registered nosave memory: [mem 0xbe000000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
PM: Registered nosave memory: [mem 0xfed14000-0xfed18fff]
PM: Registered nosave memory: [mem 0xfed19000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 34 pages/cpu @ffff880137c00000 s99544 r8192 d31528 u262144
pcpu-alloc: s99544 r8192 d31528 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 979609
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3793980K/3980728K available (8499K kernel code, 1309K rwdata, 3988K rodata, 1508K init, 1316K bss, 186748K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:488 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2527.199 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.39 BogoMIPS (lpj=10108796)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
FEATURE SPEC_CTRL Not Present
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 32180 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 4
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz (family: 0x6, model: 0x25, stepping: 0x5)
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
core: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
microcode: CPU2 microcode updated early to revision 0x4, date = 2013-06-28
#3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (20217.59 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbb6cf000-0xbb7cefff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 9:02:03, date: 02/13/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880132462800 00043B (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8801324D4000 0008AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880132492800 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880132457C00 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [APPR] (off)
ACPI: Power Resource [COMP] (off)
ACPI: Power Resource [LPP] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window]
pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4050-0x4057]
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd4824000-0xd482400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:10eb] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xd4800000-0xd481ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xd482a000-0xd482afff]
pci 0000:00:19.0: reg 0x18: [io 0x4020-0x403f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xd4829000-0xd48293ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd4820000-0xd4823fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd4828000-0xd48283ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3b0b] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x4048-0x404f]
pci 0000:00:1f.2: reg 0x14: [io 0x405c-0x405f]
pci 0000:00:1f.2: reg 0x18: [io 0x4040-0x4047]
pci 0000:00:1f.2: reg 0x1c: [io 0x4058-0x405b]
pci 0000:00:1f.2: reg 0x20: [io 0x4000-0x401f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd4827000-0xd48277ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xd4826000-0xd4826fff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd4700000-0xd47fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-42]
pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd0700000-0xd46fffff]
pci 0000:43:00.0: [1180:e822] type 00 class 0x080500
pci 0000:43:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:43:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
pci 0000:43:00.0: MMC cards are now supported by standard SDHCI controller
pci 0000:43:00.0: reg 0x10: [mem 0xd0603000-0xd06030ff]
pci 0000:43:00.0: supports D1 D2
pci 0000:43:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:43:00.1: [1180:e230] type 00 class 0x088000
pci 0000:43:00.1: reg 0x10: [mem 0xd0602000-0xd06020ff]
pci 0000:43:00.1: supports D1 D2
pci 0000:43:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:43:00.3: [1180:e832] type 00 class 0x0c0010
pci 0000:43:00.3: reg 0x10: [mem 0xd0600000-0xd06007ff]
pci 0000:43:00.3: supports D1 D2
pci 0000:43:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 43]
pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd06fffff]
pci 0000:44:00.0: [14e4:4727] type 00 class 0x028000
pci 0000:44:00.0: reg 0x10: [mem 0xd0500000-0xd0503fff 64bit]
pci 0000:44:00.0: supports D1 D2
pci 0000:44:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 44]
pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
pci 0000:00:1e.0: PCI bridge to [bus 45] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0400000-0xd04fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfedfffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbafcf000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:00: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xd4900000-0xd4900fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
system 00:02: [io 0x0200-0x027f] has been reserved
system 00:02: [io 0x1000-0x100f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x0400-0x047f] could not be reserved
system 00:02: [io 0x0500-0x057f] has been reserved
system 00:02: [io 0xef80-0xef9f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (disabled)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs SYN0179 SYN0100 SYN0002 PNP0f13 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-42] add_size 200000 add_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd4a00000-0xd4bfffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd4700000-0xd47fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-42]
pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd0700000-0xd46fffff]
pci 0000:00:1c.1: bridge window [mem 0xd4a00000-0xd4bfffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 43]
pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd06fffff]
pci 0000:00:1c.3: PCI bridge to [bus 44]
pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
pci 0000:00:1e.0: PCI bridge to [bus 45]
pci 0000:00:1e.0: bridge window [mem 0xd0400000-0xd04fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window]
pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xd4700000-0xd47fffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd46fffff]
pci_bus 0000:02: resource 2 [mem 0xd4a00000-0xd4bfffff 64bit pref]
pci_bus 0000:43: resource 1 [mem 0xd0600000-0xd06fffff]
pci_bus 0000:44: resource 1 [mem 0xd0500000-0xd05fffff]
pci_bus 0000:45: resource 1 [mem 0xd0400000-0xd04fffff]
pci_bus 0000:45: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:45: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:45: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:45: resource 7 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:45: resource 8 [mem 0xf0000000-0xfedfffff window]
pci_bus 0000:45: resource 9 [mem 0xfee01000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 37212K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb6fcf000-0xbafcf000] (64MB) mapped at [ffff8800b6fcf000-ffff8800bafcefff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1518512524.204:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:43:00.0: Signaling PME through PCIe PME interrupt
pci 0000:43:00.1: Signaling PME through PCIe PME interrupt
pci 0000:43:00.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:44:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1366x768x32, linelength=5504, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 4160k, total 4160k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [EXTZ] (22 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [EX2Z] (0 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [PWMZ] (0 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [LOCZ] (24 C)
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [GFXZ] (0 C)
thermal LNXTHERM:05: registered as thermal_zone5
ACPI: Thermal Zone [BATZ] (21 C)
thermal LNXTHERM:06: registered as thermal_zone6
ACPI: Thermal Zone [EGXZ] (0 C)
thermal LNXTHERM:07: registered as thermal_zone7
ACPI: Thermal Zone [CPUZ] (35 C)
thermal LNXTHERM:08: registered as thermal_zone8
ACPI: Thermal Zone [MCHZ] (32 C)
thermal LNXTHERM:09: registered as thermal_zone9
ACPI: Thermal Zone [PCHZ] (59 C)
GHES: HEST is not enabled!
serial 00:04: [io 0x03f8-0x03ff]
serial 00:04: [irq 4]
serial 00:04: activated
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: TPM is disabled/deactivated (0x7)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4829000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-112-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 20, io mem 0xd4828000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-112-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x20655, pf=0x10, revision=0x4
microcode: CPU1 sig=0x20655, pf=0x10, revision=0x4
microcode: CPU2 sig=0x20655, pf=0x10, revision=0x4
microcode: CPU3 sig=0x20655, pf=0x10, revision=0x4
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 4c603087bab8f0a02cb3b4e1fb4c40f507e71ef1'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 6:864:19
rtc_cmos 00:03: setting system clock to 2018-02-13 09:02:05 UTC (1518512525)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1508K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1728K
Freeing unused kernel memory: 108K
random: systemd-udevd: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:43:00.0: SDHCI controller found [1180:e822] (rev 1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
sdhci-pci 0000:43:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:43:00.0: No vmmc regulator found
sdhci-pci 0000:43:00.0: No vqmmc regulator found
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[drm] Initialized drm 1.1.0 20060810
mmc0: SDHCI controller on PCI [0000:43:00.0] using DMA
firewire_ohci 0000:43:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 1c:c1:de:bb:27:51
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
e1000e 0000:00:19.0 enp0s25: renamed from eth0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x37 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827180 irq 29
ata3: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827200 irq 29
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827300 irq 29
ata6: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827380 irq 29
Blacklisted intel_ips for HP ProBook
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 410000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0d: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
[drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
tsc: Refined TSC clocksource calibration: 2526.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x246cdab5d1d, max_idle_ns: 440795263955 ns
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 1-1.5: new high-speed USB device number 3 using ehci-pci
firewire_core 0000:43:00.3: created device fw0: GUID 5566778811223344, S400
usb 2-1.1: new low-speed USB device number 3 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: unexpected _GTF length (8)
ata1.00: ATA-8: Hitachi HTS725032A9A364, PC3OCH0A, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: unexpected _GTF length (8)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72503 CH0A PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1.1: New USB device found, idVendor=046d, idProduct=c064
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: USB Optical Mouse
usb 2-1.1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usb 1-1.5: New USB device found, idVendor=0461, idProduct=4db6
usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-1.5: Product: Villem
usb 1-1.5: Manufacturer: Primax Electronics Ltd.
usb 1-1.5: SerialNumber: PMX01
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C064.0001/input/input10
hid-generic 0003:046D:C064.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: unexpected _GTF length (8)
ata2.00: ATAPI: hp CDDVDW TS-L633N, 0300, max UDMA/100
ata2.00: unexpected _GTF length (8)
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM hp CDDVDW TS-L633N 0300 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8
ata3: SATA link down (SStatus 0 SControl 300)
clocksource: Switched to clocksource tsc
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
psmouse serio4: synaptics: queried max coordinates: x [..5560], y [..4778]
psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0400/0x0, board id: 0, fw id: 643134
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Debug File System...
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Started Read required files in advance.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Started Braille Device Support.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting Journal Service...
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Set console keymap...
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Journal Service.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
lp0: using parport0 (interrupt-driven).
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[245]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
hp_accel: hardware type HPB655x found
lis3lv02d: 8 bits sensor found
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input14
SSE version of gcm_enc/dec engaged.
media: Linux media interface: v0.10
Linux video capture interface: v2.00
snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD75B3X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC0D0: hp_outs=2 (0xf/0xa/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_idt hdaudioC0D0: inputs:
snd_hda_codec_idt hdaudioC0D0: Internal Mic=0xc
snd_hda_codec_idt hdaudioC0D0: Mic=0xb
snd_hda_codec_idt hdaudioC0D0: Line=0xe
input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
kvm: disabled by bios
uvcvideo: Found UVC 1.00 device Villem (0461:4db6)
input: Villem as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input22
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: HP WMI hotkeys as /devices/virtual/input/input23
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl: module verification failed: signature and/or required key missing - tainting kernel
wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
wl 0000:44:00.0 wlo1: renamed from wlan0
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Adding 1999868k swap on /dev/sda2. Priority:-1 extents:1 across:1999868k FS
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1518508949.522:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=807 comm="apparmor_parser"
audit: type=1400 audit(1518508949.522:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=807 comm="apparmor_parser"
audit: type=1400 audit(1518508949.522:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=807 comm="apparmor_parser"
audit: type=1400 audit(1518508949.522:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=807 comm="apparmor_parser"
audit: type=1400 audit(1518508949.522:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=806 comm="apparmor_parser"
audit: type=1400 audit(1518508949.522:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=806 comm="apparmor_parser"
audit: type=1400 audit(1518508949.522:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=812 comm="apparmor_parser"
audit: type=1400 audit(1518508949.526:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=813 comm="apparmor_parser"
audit: type=1400 audit(1518508949.526:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=813 comm="apparmor_parser"
audit: type=1400 audit(1518508949.526:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=813 comm="apparmor_parser"
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2526970043 Hz
vboxdrv: Successfully loaded version 5.1.32 (interface 0x002a0000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000