dmesg - test1
Linux version 4.14.0-kali3-amd64 (devel@kali.org) (gcc version 7.2.0 (Debian 7.2.0-19)) #1 SMP Debian 4.14.13-1kali1 (2018-01-25)
Command line: BOOT_IMAGE=/vmlinuz-4.14.0-kali3-amd64 root=/dev/mapper/Gon--tower--vg-root ro quiet
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000016d38fff] usable
BIOS-e820: [mem 0x0000000016d39000-0x0000000016d39fff] ACPI NVS
BIOS-e820: [mem 0x0000000016d3a000-0x0000000016d3afff] reserved
BIOS-e820: [mem 0x0000000016d3b000-0x000000001eae3fff] usable
BIOS-e820: [mem 0x000000001eae4000-0x000000001ef6bfff] reserved
BIOS-e820: [mem 0x000000001ef6c000-0x000000001f012fff] usable
BIOS-e820: [mem 0x000000001f013000-0x000000001f3bafff] ACPI NVS
BIOS-e820: [mem 0x000000001f3bb000-0x000000001ff2afff] reserved
BIOS-e820: [mem 0x000000001ff2b000-0x000000001fffefff] type 20
BIOS-e820: [mem 0x000000001ffff000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x0000000068bfffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000004963fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0x1f013000 ACPI=0x1f013000 SMBIOS=0x1fe4d000 MPS=0xfca50 ESRT=0x18ffde98
random: fast init done
SMBIOS 3.0 present.
DMI: MSI MS-7A62/Z270 GAMING M3 (MS-7A62), BIOS 1.40 11/17/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x496400 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 0040000000 mask 7FC0000000 uncachable
2 base 0030000000 mask 7FF0000000 uncachable
3 base 002C000000 mask 7FFC000000 uncachable
4 base 002A000000 mask 7FFE000000 uncachable
5 base 0029000000 mask 7FFF000000 uncachable
6 base 0028800000 mask 7FFF800000 uncachable
7 base 0028400000 mask 7FFFC00000 uncachable
8 base 2000000000 mask 7000000000 uncachable
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: last_pfn = 0x20000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcda0-0x000fcdaf] mapped at [ffffffffff240da0]
esrt: Reserving ESRT space from 0x0000000018ffde98 to 0x0000000018ffded0.
Base memory trampoline at [ffff9ccb80095000] 95000 size 24576
Using GB pages for direct mapping
BRK [0x212005000, 0x212005fff] PGTABLE
BRK [0x212006000, 0x212006fff] PGTABLE
BRK [0x212007000, 0x212007fff] PGTABLE
BRK [0x212008000, 0x212008fff] PGTABLE
BRK [0x212009000, 0x212009fff] PGTABLE
BRK [0x21200a000, 0x21200afff] PGTABLE
BRK [0x21200b000, 0x21200bfff] PGTABLE
BRK [0x21200c000, 0x21200cfff] PGTABLE
BRK [0x21200d000, 0x21200dfff] PGTABLE
BRK [0x21200e000, 0x21200efff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x13deb000-0x1694afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000001F013000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000001F0130B0 0000DC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000001F03A448 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000001F013220 027227 (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x000000001F3BAD80 000040
ACPI: APIC 0x000000001F03A560 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000001F03A620 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000001F03A668 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000001F03A708 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000001F03A748 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: SSDT 0x000000001F03AAF0 003176 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000001F03DC68 0025A5 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x000000001F040210 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000001F040248 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x000000001F041030 000A2B (v02 INTEL xh_rvp08 00000000 INTL 20160422)
ACPI: UEFI 0x000000001F041A60 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: SSDT 0x000000001F041AA8 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x000000001F042988 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000001F042A20 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
ACPI: SSDT 0x000000001F042B68 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000001F042E08 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: SSDT 0x000000001F045E10 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
ACPI: DBGP 0x000000001F046328 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000001F046360 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: DMAR 0x000000001F0463B8 000114 (v01 INTEL KBL 00000001 INTL 00000001)
ACPI: BGRT 0x000000001F0464D0 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: WSMT 0x000000001F046508 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000004963fffff]
NODE_DATA(0) allocated [mem 0x4963fb000-0x4963fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000004963fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x0000000016d38fff]
node 0: [mem 0x0000000016d3b000-0x000000001eae3fff]
node 0: [mem 0x000000001ef6c000-0x000000001f012fff]
node 0: [mem 0x000000001ffff000-0x000000001fffffff]
node 0: [mem 0x0000000100000000-0x00000004963fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000004963fffff]
On node 0 totalpages: 3886887
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 1903 pages used for memmap
DMA32 zone: 121738 pages, LIFO batch:31
Normal zone: 58768 pages used for memmap
Normal zone: 3761152 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0x16d39000-0x16d39fff]
PM: Registered nosave memory: [mem 0x16d3a000-0x16d3afff]
PM: Registered nosave memory: [mem 0x1eae4000-0x1ef6bfff]
PM: Registered nosave memory: [mem 0x1f013000-0x1f3bafff]
PM: Registered nosave memory: [mem 0x1f3bb000-0x1ff2afff]
PM: Registered nosave memory: [mem 0x1ff2b000-0x1fffefff]
PM: Registered nosave memory: [mem 0x20000000-0x68bfffff]
PM: Registered nosave memory: [mem 0x68c00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x68c00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 44 pages/cpu @ffff9cd016000000 s142232 r8192 d29800 u262144
pcpu-alloc: s142232 r8192 d29800 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 3826125
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.14.0-kali3-amd64 root=/dev/mapper/Gon--tower--vg-root ro quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 15039304K/15547548K available (10252K kernel code, 1146K rwdata, 3040K rodata, 1508K init, 664K bss, 508244K reserved, 0K cma-reserved)
Kernel/User page tables isolation: enabled
ftrace: allocating 29024 entries in 114 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 33024, nr_irqs: 2048, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 4200.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8400.00 BogoMIPS (lpj=16800000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170728
ACPI: 11 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 28K
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000001eed1000 end: 0x0000001eef0fff
DMAR: RMRR base: 0x00000028400000 end: 0x00000068bfffff
DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
DMAR: ANDD device: 9 name: \_SB.PCI0.UA00
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz (family: 0x6, model: 0x9e, stepping: 0x9)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (67200.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x16d39000-0x16d39fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x1f013000-0x1f3bafff] (3833856 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 38 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9CD004468000 00081F (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9CD00472FC00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9CD00471AA00 000115 (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9CD00471AE00 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9CD00455B000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9CD00459E200 000197 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9CD0047B5000 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x68c00000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0x2000000000-0x2fffffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:591f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:5912] type 00 class 0x038000
pci 0000:00:02.0: reg 0x10: [mem 0x2ffe000000-0x2ffeffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x2fb0000000-0x2fbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0x2fff02a000-0x2fff02afff 64bit]
pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x2fff010000-0x2fff01ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0x2fff029000-0x2fff029fff 64bit]
pci 0000:00:15.0: [8086:a2e0] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0x2fff028000-0x2fff028fff 64bit]
pci 0000:00:15.1: [8086:a2e1] type 00 class 0x118000
pci 0000:00:15.1: reg 0x10: [mem 0x2fff027000-0x2fff027fff 64bit]
pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0x2fff026000-0x2fff026fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf404000-0xdf405fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf407000-0xdf4070ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf406000-0xdf4067ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.2: [8086:a2e9] type 01 class 0x060400
pci 0000:00:1b.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.4: [8086:a2eb] type 01 class 0x060400
pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:a295] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:a297] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:a2a7] type 00 class 0x118000
pci 0000:00:1e.0: reg 0x10: [mem 0x2fff025000-0x2fff025fff 64bit]
pci 0000:00:1f.0: [8086:a2c5] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf400000-0xdf403fff]
pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0x2fff020000-0x2fff023fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0x2fff000000-0x2fff00ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0x2fff024000-0x2fff0240ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10de:1c81] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x2fe0000000-0x2fefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0x2ff0000000-0x2ff1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0x2fe0000000-0x2ff1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b21:2142] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xdf300000-0xdf307fff 64bit]
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.2: PCI bridge to [bus 03]
pci 0000:00:1b.2: bridge window [mem 0xdf300000-0xdf3fffff]
pci 0000:04:00.0: [10de:1c82] type 00 class 0x030000
pci 0000:04:00.0: reg 0x10: [mem 0xdc000000-0xdcffffff]
pci 0000:04:00.0: reg 0x14: [mem 0x2fc0000000-0x2fcfffffff 64bit pref]
pci 0000:04:00.0: reg 0x1c: [mem 0x2fd0000000-0x2fd1ffffff 64bit pref]
pci 0000:04:00.0: reg 0x24: [io 0xd000-0xd07f]
pci 0000:04:00.0: reg 0x30: [mem 0xdd000000-0xdd07ffff pref]
pci 0000:04:00.1: [10de:0fb9] type 00 class 0x040300
pci 0000:04:00.1: reg 0x10: [mem 0xdd080000-0xdd083fff]
pci 0000:00:1b.4: PCI bridge to [bus 04]
pci 0000:00:1b.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1b.4: bridge window [mem 0xdc000000-0xdd0fffff]
pci 0000:00:1b.4: bridge window [mem 0x2fc0000000-0x2fd1ffffff 64bit pref]
acpiphp: Slot [1-1] registered
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [8086:24f3] type 00 class 0x028000
pci 0000:06:00.0: reg 0x10: [mem 0xdf200000-0xdf201fff 64bit]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.5: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:07:00.0: [1969:e0b1] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xdf100000-0xdf13ffff 64bit]
pci 0000:07:00.0: reg 0x18: [io 0xc000-0xc07f]
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.7: bridge window [mem 0xdf100000-0xdf1fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:04:00.0: vgaarb: bridge control possible
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x16d39000-0x17ffffff]
e820: reserve RAM buffer [mem 0x1eae4000-0x1fffffff]
e820: reserve RAM buffer [mem 0x1f013000-0x1fffffff]
e820: reserve RAM buffer [mem 0x496400000-0x497ffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a0f] has been reserved
system 00:00: [io 0x0a10-0x0a1f] has been reserved
system 00:00: [io 0x0a20-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0xff00-0xfffe] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0x2fe0000000-0x2ff1ffffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.2: PCI bridge to [bus 03]
pci 0000:00:1b.2: bridge window [mem 0xdf300000-0xdf3fffff]
pci 0000:00:1b.4: PCI bridge to [bus 04]
pci 0000:00:1b.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1b.4: bridge window [mem 0xdc000000-0xdd0fffff]
pci 0000:00:1b.4: bridge window [mem 0x2fc0000000-0x2fd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.5: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.7: bridge window [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x68c00000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0x2000000000-0x2fffffffff window]
pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0x2fe0000000-0x2ff1ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xdf300000-0xdf3fffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xdc000000-0xdd0fffff]
pci_bus 0000:04: resource 2 [mem 0x2fc0000000-0x2fd1ffffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xdf100000-0xdf1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 44416K
DMAR: ACPI device "device:7c" under DMAR at fed91000 as 00:15.0
DMAR: ACPI device "device:7d" under DMAR at fed91000 as 00:15.1
DMAR: ACPI device "device:7e" under DMAR at fed91000 as 00:1e.0
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x0c000000-0x10000000] (64MB) mapped at [ffff9ccb8c000000-ffff9ccb8fffffff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c8a615336c, max_idle_ns: 440795257976 ns
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1518232465.520:1): state=initialized audit_enabled=0 res=1
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
efifb: probing for efifb
efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: sig=0x906e9, pf=0x2, revision=0x70
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (709231189, 0)->(712037593, -2806404)
registered taskstats version 1
zswap: loaded using pool lzo/zbud
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
rtc_cmos 00:04: setting system clock to 2018-02-10 03:14:25 UTC (1518232465)
Freeing unused kernel memory: 1508K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2012K
Freeing unused kernel memory: 1056K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0f: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
hidraw: raw HID events driver (C) Jiri Kosina
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
libata version 3.00 loaded.
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.14.0-kali3-amd64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.14.0-kali3-amd64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
ahci 0000:00:17.0: version 3.0
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
alx 0000:07:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [30:9c:23:62:67:9f]
alg: No test for pcbc(aes) (pcbc-aes-aesni)
xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.14.0-kali3-amd64 xhci-hcd
usb usb3: SerialNumber: 0000:03:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.14.0-kali3-amd64 xhci-hcd
usb usb4: SerialNumber: 0000:03:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf406000 port 0xdf406100 irq 123
ata2: SATA max UDMA/133 abar m2048@0xdf406000 port 0xdf406180 irq 123
ata3: SATA max UDMA/133 abar m2048@0xdf406000 port 0xdf406200 irq 123
ata4: SATA max UDMA/133 abar m2048@0xdf406000 port 0xdf406280 irq 123
ata5: SATA max UDMA/133 abar m2048@0xdf406000 port 0xdf406300 irq 123
ata6: SATA max UDMA/133 abar m2048@0xdf406000 port 0xdf406380 irq 123
i915 0000:00:02.0: enabling device (0000 -> 0003)
[drm] Memory usable by graphics device = 4096M
checking generic (f1000000 300000) vs hw (2fb0000000 10000000)
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_01.bin
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
usb 1-2: new full-speed USB device number 2 using xhci_hcd
[drm] failed to retrieve link info, disabling eDP
[drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
ata2: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-9: ST2000DM006-2DM164, CC26, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ATA-8: WDC WD5000AAKX-60U6AA0, 18.01H18, max UDMA/100
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST2000DM006-2DM1 CC26 PQ: 0 ANSI: 5
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: ATAPI: hp CDDVDW SH-216BB, HE30, max UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKX-6 1H18 PQ: 0 ANSI: 5
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[drm] Cannot find any crtc or sizes
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM hp CDDVDW SH-216BB HE30 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr 3:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2 sdb3
sd 2:0:0:0: [sdb] Attached SCSI disk
usb 1-2: New USB device found, idVendor=0a5c, idProduct=4500
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: BCM2046B1
usb 1-2: Manufacturer: Broadcom
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 3 ports detected
usb 1-8: new full-speed USB device number 3 using xhci_hcd
clocksource: Switched to clocksource tsc
usb 1-8: New USB device found, idVendor=046d, idProduct=c52b
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-8: Product: USB Receiver
usb 1-8: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-8/input2
usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
input: Logitech K400 as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.2/0003:046D:C52B.0003/0003:046D:4024.0004/input/input4
logitech-hidpp-device 0003:046D:4024.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:14.0-8:2
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
usb 1-2.1: New USB device found, idVendor=0a5c, idProduct=4502
usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:0A5C:4502.0005/input/input5
hid-generic 0003:0A5C:4502.0005: input,hidraw2: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:14.0-2.1/input0
usb 1-2.2: new full-speed USB device number 5 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=0a5c, idProduct=4503
usb 1-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:0A5C:4503.0006/input/input6
hid-generic 0003:0A5C:4503.0006: input,hidraw3: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:14.0-2.2/input0
usb 1-2.3: new full-speed USB device number 6 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=0a5c, idProduct=2148
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.3: Product: BCM92046DG-CL1ROM
usb 1-2.3: Manufacturer: Broadcom Corp
usb 1-2.3: SerialNumber: 0002721F7961
[drm] RC6 on
random: crng init done
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 236 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Mounting POSIX Message Queue File System...
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia-nvlink: Nvlink Core is being initialized, major device number 247
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
nvidia 0000:04:00.0: enabling device (0000 -> 0003)
nvidia 0000:04:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 384.111 Tue Dec 19 23:51:45 PST 2017 (using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 384.111 Tue Dec 19 22:56:18 PST 2017
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[drm] [nvidia-drm] [GPU ID 0x00000400] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:04:00.0 on minor 2
systemd-journald[539]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
sr 3:0:0:0: Attached scsi generic sg2 type 5
EFI Variables Facility v0.08 2004-May-17
input: PC Speaker as /devices/platform/pcspkr/input/input7
pstore: using zlib compression
pstore: Registered efi as persistent store backend
iTCO_vendor_support: vendor-support=0
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:06:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:06:00.0: firmware: failed to load iwlwifi-8000C-34.ucode (-2)
iwlwifi 0000:06:00.0: Direct firmware load for iwlwifi-8000C-34.ucode failed with error -2
iwlwifi 0000:06:00.0: firmware: failed to load iwlwifi-8000C-33.ucode (-2)
iwlwifi 0000:06:00.0: Direct firmware load for iwlwifi-8000C-33.ucode failed with error -2
iwlwifi 0000:06:00.0: firmware: failed to load iwlwifi-8000C-32.ucode (-2)
iwlwifi 0000:06:00.0: Direct firmware load for iwlwifi-8000C-32.ucode failed with error -2
iwlwifi 0000:06:00.0: firmware: direct-loading firmware iwlwifi-8000C-31.ucode
iwlwifi 0000:06:00.0: loaded firmware version 31.532993.0 op_mode iwlmvm
iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:04:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:04:00.1: Disabling MSI
snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
iwlwifi 0000:06:00.0: base HW address: 44:03:2c:c7:b5:2d
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
usbcore: registered new interface driver btusb
idma64 idma64.0: Found Intel integrated DMA 64-bit
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
idma64 idma64.1: Found Intel integrated DMA 64-bit
intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
idma64 idma64.2: Found Intel integrated DMA 64-bit
dw-apb-uart.2: ttyS2 at MMIO 0x2fff025000 (irq = 20, base_baud = 115200) is a 16550A
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal thermal_zone2: failed to read out thermal zone (-61)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.4/0000:04:00.1/sound/card2/input23
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.4/0000:04:00.1/sound/card2/input24
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.4/0000:04:00.1/sound/card2/input25
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
Adding 15675388k swap on /dev/mapper/Gon--tower--vg-swap_1. Priority:-2 extents:1 across:15675388k FS
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: send auth to e0:3f:49:ec:0b:9e (try 2/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 4200000102 Hz
vboxdrv: Successfully loaded version 5.2.6_Debian (interface 0x00290000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
NVRM: Your system is not currently configured to drive a VGA console
on the primary VGA device. The NVIDIA Linux graphics driver
requires the use of a text-mode VGA console. Use of other console
drivers including, but not limited to, vesafb, may result in
corruption and stability problems, and is not supported.
nvidia-modeset: Allocated GPU:0 (GPU-1a8ea0e8-9a04-eb49-abd6-7e2ba582dc67) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:1 (GPU-7fb9402e-3e66-dccb-9704-6bda392d67cd) @ PCI:0000:04:00.0
logitech-hidpp-device 0003:046D:4024.0004: HID++ 2.0 device connected.
CPU4: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1112)
CPU4: Core temperature above threshold, cpu clock throttled (total events = 1112)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1116)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1116)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 1116)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1116)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 1116)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 1116)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 1116)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1116)
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU1: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU4: Core temperature above threshold, cpu clock throttled (total events = 2043)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 2043)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 2049)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 2049)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 2049)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 2049)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 2049)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 2049)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 2049)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 2049)
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU4: Package temperature/speed normal
tachyon[4376]: segfault at e0000004 ip 00000000565adc65 sp 00000000f5f52090 error 4 in tachyon[56596000+30000]
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 0: 9400004000040150
mce: [Hardware Error]: TSC 79e981e1481 ADDR 1ffffa449e128
mce: [Hardware Error]: PROCESSOR 0:906e9 TIME 1518234444 SOCKET 0 APIC 2 microcode 70
tachyon[4389]: segfault at e0000004 ip 00000000565f5c65 sp 00000000f5747090 error 4 in tachyon[565de000+30000]
tachyon[4397]: segfault at 3ff6f7d2 ip 0000000056632c65 sp 00000000ffb5bc00 error 4 in tachyon[5661b000+30000]
CPU0: Core temperature above threshold, cpu clock throttled (total events = 25639)
CPU4: Core temperature above threshold, cpu clock throttled (total events = 25639)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 25705)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 25705)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 25705)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 25705)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 25705)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 25705)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 25705)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 25705)
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU5: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU4: Package temperature/speed normal
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
wlan0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e0:3f:49:ec:0b:a2
wlan0: send auth to e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:a2 (capab=0x11 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from e0:3f:49:ec:0b:a2 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
wlan0: authenticate with e0:3f:49:ec:0b:a2
wlan0: send auth to e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:a2 (capab=0x11 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from e0:3f:49:ec:0b:a2 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with 40:4a:03:df:ee:99
wlan0: send auth to 40:4a:03:df:ee:99 (try 1/3)
wlan0: authenticated
iwlwifi 0000:06:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:06:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 40:4a:03:df:ee:99 (try 1/3)
wlan0: RX AssocResp from 40:4a:03:df:ee:99 (capab=0x431 status=0 aid=5)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:df:ee:99 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with 40:4a:03:df:ee:99
wlan0: send auth to 40:4a:03:df:ee:99 (try 1/3)
wlan0: authenticated
iwlwifi 0000:06:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:06:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 40:4a:03:df:ee:99 (try 1/3)
wlan0: RX AssocResp from 40:4a:03:df:ee:99 (capab=0x431 status=0 aid=5)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:df:ee:99 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with 40:4a:03:df:ee:99
wlan0: send auth to 40:4a:03:df:ee:99 (try 1/3)
wlan0: authenticated
iwlwifi 0000:06:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:06:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 40:4a:03:df:ee:99 (try 1/3)
wlan0: RX AssocResp from 40:4a:03:df:ee:99 (capab=0x431 status=0 aid=5)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:df:ee:99 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: authenticate with 40:4a:03:df:ee:99
wlan0: send auth to 40:4a:03:df:ee:99 (try 1/3)
wlan0: authenticated
iwlwifi 0000:06:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:06:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 40:4a:03:df:ee:99 (try 1/3)
wlan0: RX AssocResp from 40:4a:03:df:ee:99 (capab=0x431 status=0 aid=5)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from 40:4a:03:df:ee:99 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e0:3f:49:ec:0b:a2
wlan0: send auth to e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:a2 (capab=0x11 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from e0:3f:49:ec:0b:a2 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
wlan0: authenticate with e0:3f:49:ec:0b:a2
wlan0: send auth to e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:a2 (capab=0x11 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from e0:3f:49:ec:0b:a2 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with 40:4a:03:df:ee:99
wlan0: send auth to 40:4a:03:df:ee:99 (try 1/3)
wlan0: authenticated
iwlwifi 0000:06:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:06:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 40:4a:03:df:ee:99 (try 1/3)
wlan0: RX AssocResp from 40:4a:03:df:ee:99 (capab=0x431 status=0 aid=5)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:df:ee:99 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with 40:4a:03:df:ee:99
wlan0: send auth to 40:4a:03:df:ee:99 (try 1/3)
wlan0: authenticated
iwlwifi 0000:06:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:06:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 40:4a:03:df:ee:99 (try 1/3)
wlan0: RX AssocResp from 40:4a:03:df:ee:99 (capab=0x431 status=0 aid=5)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:df:ee:99 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e0:3f:49:ec:0b:a2
wlan0: send auth to e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:a2 (capab=0x11 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from e0:3f:49:ec:0b:a2 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
wlan0: authenticate with e0:3f:49:ec:0b:a2
wlan0: send auth to e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:a2 (capab=0x11 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from e0:3f:49:ec:0b:a2 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with 40:4a:03:df:ee:99
wlan0: send auth to 40:4a:03:df:ee:99 (try 1/3)
wlan0: authenticated
iwlwifi 0000:06:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:06:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 40:4a:03:df:ee:99 (try 1/3)
wlan0: RX AssocResp from 40:4a:03:df:ee:99 (capab=0x431 status=0 aid=5)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:df:ee:99 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with 40:4a:03:df:ee:99
wlan0: send auth to 40:4a:03:df:ee:99 (try 1/3)
wlan0: authenticated
iwlwifi 0000:06:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:06:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 40:4a:03:df:ee:99 (try 1/3)
wlan0: RX AssocResp from 40:4a:03:df:ee:99 (capab=0x431 status=0 aid=5)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:df:ee:99 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e0:3f:49:ec:0b:a2
wlan0: send auth to e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:a2 (capab=0x11 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated from e0:3f:49:ec:0b:a2 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
wlan0: authenticate with e0:3f:49:ec:0b:a2
wlan0: send auth to e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:a2 (capab=0x11 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from e0:3f:49:ec:0b:a2 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with 40:4a:03:df:ee:99
wlan0: send auth to 40:4a:03:df:ee:99 (try 1/3)
wlan0: authenticated
iwlwifi 0000:06:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:06:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 40:4a:03:df:ee:99 (try 1/3)
wlan0: RX AssocResp from 40:4a:03:df:ee:99 (capab=0x431 status=0 aid=5)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:df:ee:99 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with 40:4a:03:df:ee:99
wlan0: send auth to 40:4a:03:df:ee:99 (try 1/3)
wlan0: authenticated
iwlwifi 0000:06:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:06:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 40:4a:03:df:ee:99 (try 1/3)
wlan0: RX AssocResp from 40:4a:03:df:ee:99 (capab=0x431 status=0 aid=5)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:df:ee:99 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e0:3f:49:ec:0b:9e
wlan0: send auth to e0:3f:49:ec:0b:9e (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:9e (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:9e (capab=0x411 status=0 aid=3)
wlan0: associated
wlan0: deauthenticating from e0:3f:49:ec:0b:9e by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with e0:3f:49:ec:0b:a2
wlan0: send auth to e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: authenticated
wlan0: associate with e0:3f:49:ec:0b:a2 (try 1/3)
wlan0: RX AssocResp from e0:3f:49:ec:0b:a2 (capab=0x11 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready