dmesg - 1
random: get_random_bytes called from start_kernel+0x42/0x4e6 with crng_init=0
Linux version 4.13.0-32-generic (buildd@lgw01-amd64-016) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3)) #35-Ubuntu SMP Thu Jan 25 09:13:46 UTC 2018 (Ubuntu 4.13.0-32.35-generic 4.13.13)
Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-32-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] ACPI data
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 2.5 present.
DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Hypervisor detected: KVM
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR variable ranges disabled:
MTRR: Disabled
x86/PAT: MTRRs disabled, skipping PAT initialization too.
CPU MTRRs all blank - virtualized system.
x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff96128009fff0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff961280099000] 99000 size 24576
BRK [0x26b2a000, 0x26b2afff] PGTABLE
BRK [0x26b2b000, 0x26b2bfff] PGTABLE
BRK [0x26b2c000, 0x26b2cfff] PGTABLE
BRK [0x26b2d000, 0x26b2dfff] PGTABLE
BRK [0x26b2e000, 0x26b2efff] PGTABLE
BRK [0x26b2f000, 0x26b2ffff] PGTABLE
RAMDISK: [mem 0x31d05000-0x34e79fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
ACPI: XSDT 0x000000007FFF0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 0x000000007FFF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 0x000000007FFF0480 0021C8 (v02 VBOX VBOXBIOS 00000002 INTL 20160831)
ACPI: FACS 0x000000007FFF0200 000040
ACPI: FACS 0x000000007FFF0200 000040
ACPI: APIC 0x000000007FFF0240 000064 (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
ACPI: SSDT 0x000000007FFF02B0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20160831)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007ffeffff]
NODE_DATA(0) allocated [mem 0x7ffc5000-0x7ffeffff]
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:7ff45001, primary cpu clock
kvm-clock: using sched offset of 17135482695 cycles
clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x000000007ffeffff]
Normal empty
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000007ffeffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffeffff]
On node 0 totalpages: 524174
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8128 pages used for memmap
DMA32 zone: 520176 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 3, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 3 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x80000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on KVM
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:3 nr_cpu_ids:3 nr_node_ids:1
percpu: Embedded 45 pages/cpu @ffff9612ffc00000 s146520 r8192 d29608 u524288
pcpu-alloc: s146520 r8192 d29608 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 -
PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515961
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-32-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1986052K/2096696K available (12300K kernel code, 2482K rwdata, 3996K rodata, 2364K init, 2368K bss, 110644K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=3, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 37818 entries in 148 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=3.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=3
NR_IRQS: 524544, nr_irqs: 448, preallocated irqs: 16
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Detected 2594.104 MHz processor
Calibrating delay loop (skipped) preset value.. 5188.20 BogoMIPS (lpj=10376416)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
FEATURE SPEC_CTRL Not Present
mce: CPU supports 0 MCE banks
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 1
x2apic enabled
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
kvm-clock: cpu 1, msr 0:7ff45041, secondary cpu clock
mce: CPU supports 0 MCE banks
#2
kvm-clock: cpu 2, msr 0:7ff45081, secondary cpu clock
mce: CPU supports 0 MCE banks
smp: Brought up 1 node, 3 CPUs
smpboot: Total of 3 processors activated (15564.62 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 22:12:30, date: 02/02/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 07
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xffdfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref]
pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 0x18: [io 0xd010-0xd017]
pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f]
pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
pci 0000:00:07.0: quirk: [io 0x4000-0x403f] claimed by PIIX4 ACPI
pci 0000:00:07.0: quirk: [io 0x4100-0x410f] claimed by PIIX4 SMB
pci 0000:00:0c.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:0c.0: reg 0x10: [mem 0xf0810000-0xf081ffff]
pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
pci 0000:00:0d.0: reg 0x10: [io 0xd240-0xd247]
pci 0000:00:0d.0: reg 0x18: [io 0xd250-0xd257]
pci 0000:00:0d.0: reg 0x20: [io 0xd260-0xd26f]
pci 0000:00:0d.0: reg 0x24: [mem 0xf0820000-0xf0821fff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource kvm-clock
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp: PnP ACPI: found 2 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xffdfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 50644K
platform rtc_cmos: registered platform RTC device (no PNP device found)
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1517609571.432:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=19 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: does not run on family 6 model 42
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:0c.0: xHCI Host Controller
xhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:0c.0: hcc params 0x04000000 hci version 0x100 quirks 0x0000b930
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.0-32-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:0c.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
xhci_hcd 0000:00:0c.0: xHCI Host Controller
xhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.0-32-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:0c.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
sched_clock: Marking stable (832617185, 0)->(993022818, -160405633)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 1297faa01db899585c27cbaaacd5d444d1bb254f'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 6:626:248
rtc_cmos rtc_cmos: setting system clock to 2018-02-02 22:12:31 UTC (1517609551)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 2364K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2024K
Freeing unused kernel memory: 100K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
usb 1-1: new full-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=80ee, idProduct=0021
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-1: Product: USB Tablet
usb 1-1: Manufacturer: VirtualBox
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:0c.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input6
hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:0c.0-1/input0
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:f5:e5:13
e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
ahci 0000:00:0d.0: version 3.0
ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
scsi host2: ahci
e1000 0000:00:03.0 enp0s3: renamed from eth0
scsi host3: ahci
ata3: SATA max UDMA/133 abar m8192@0xf0820000 port 0xf0820100 irq 21
ata4: SATA max UDMA/133 abar m8192@0xf0820000 port 0xf0820180 irq 21
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata3.00: 61467808 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
tsc: Refined TSC clocksource calibration: 2594.205 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2564d9db2d2, max_idle_ns: 440795326314 ns
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] 61467808 512-byte logical blocks: (31.5 GB/29.3 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 300)
floppy0: no floppy controllers found
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
random: crng init done
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected virtualization oracle.
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Reached target Remote File Systems.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
systemd-journald[264]: Received request to flush runtime journal from PID 1
vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input7
vboxguest: misc device minor 55, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
vboxguest: Successfully loaded version 5.1.28_Ubuntu (interface 0x00010004)
piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 10737418240 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-0 Joules
RAPL PMU: hw unit of domain package 2^-0 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-0 Joules
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
[drm] VRAM 01000000
[TTM] Zone kernel: Available graphics memory: 1020610 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
fbcon: vboxdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 100x37
vboxvideo 0000:00:02.0: fb0: vboxdrmfb frame buffer device
[drm] Initialized vboxvideo 1.0.0 20130823 for 0000:00:02.0 on minor 0
snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
audit: type=1400 audit(1517609566.201:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=473 comm="apparmor_parser"
audit: type=1400 audit(1517609566.201:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=473 comm="apparmor_parser"
audit: type=1400 audit(1517609566.201:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=473 comm="apparmor_parser"
audit: type=1400 audit(1517609566.201:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=473 comm="apparmor_parser"
audit: type=1400 audit(1517609566.207:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=479 comm="apparmor_parser"
audit: type=1400 audit(1517609566.229:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=523 comm="apparmor_parser"
floppy0: no floppy controllers found
audit: type=1400 audit(1517609566.275:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=530 comm="apparmor_parser"
audit: type=1400 audit(1517609566.300:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=475 comm="apparmor_parser"
audit: type=1400 audit(1517609566.300:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=475 comm="apparmor_parser"
audit: type=1400 audit(1517609566.300:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=475 comm="apparmor_parser"
Adding 2097148k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:2097148k FS
IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
rfkill: input handler disabled