dmesg - 1

Return To 1 System Information

microcode: microcode updated early to revision 0x23, date = 2017-11-20
Linux version 4.14.13-1-MANJARO (builduser@manjaro) (gcc version 7.2.1 20171224 (GCC)) #1 SMP PREEMPT Wed Jan 10 21:11:43 UTC 2018
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable
BIOS-e820: [mem 0x000000000008c000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000d0277fff] usable
BIOS-e820: [mem 0x00000000d0278000-0x00000000d0479fff] reserved
BIOS-e820: [mem 0x00000000d047a000-0x00000000da11ffff] usable
BIOS-e820: [mem 0x00000000da120000-0x00000000da31ffff] type 20
BIOS-e820: [mem 0x00000000da320000-0x00000000dca22fff] reserved
BIOS-e820: [mem 0x00000000dca23000-0x00000000dcb7efff] ACPI NVS
BIOS-e820: [mem 0x00000000dcb7f000-0x00000000dcbfefff] ACPI data
BIOS-e820: [mem 0x00000000dcbff000-0x00000000dcbfffff] usable
BIOS-e820: [mem 0x00000000dcc00000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed7ffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by Lenovo
efi:  ACPI=0xdcbfe000  ACPI 2.0=0xdcbfe014  SMBIOS=0xdca22000  ESRT=0xda4ee000 
efi: [Firmware Bug]: Invalid EFI memory map entries:
efi: mem46: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
efi: mem47: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
efi: mem48: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
efi: mem49: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
efi: mem50: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
efi: mem51: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
efi: mem52: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
efi: Removing 7 invalid memory map entries.
random: fast init done
SMBIOS 2.7 present.
DMI: LENOVO 20AT004PIX/20AT004PIX, BIOS J4ET82WW(1.82) 09/10/2015
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 00E0000000 mask 7FE0000000 uncachable
  1 base 00DE000000 mask 7FFE000000 uncachable
  2 base 00DD000000 mask 7FFF000000 uncachable
  3 base 00DCC00000 mask 7FFFC00000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
e820: last_pfn = 0xdcc00 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000da4ee000 to 0x00000000da4ee060.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff941c40060000] 60000 size 24576
Using GB pages for direct mapping
BRK [0x205635000, 0x205635fff] PGTABLE
BRK [0x205636000, 0x205636fff] PGTABLE
BRK [0x205637000, 0x205637fff] PGTABLE
BRK [0x205638000, 0x205638fff] PGTABLE
BRK [0x205639000, 0x205639fff] PGTABLE
BRK [0x20563a000, 0x20563afff] PGTABLE
BRK [0x20563b000, 0x20563bfff] PGTABLE
BRK [0x20563c000, 0x20563cfff] PGTABLE
BRK [0x20563d000, 0x20563dfff] PGTABLE
BRK [0x20563e000, 0x20563efff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x36f29000-0x3778bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DCBFE014 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000DCBFE170 0000EC (v01 LENOVO TP-J4    00001820 PTEC 00000002)
ACPI: FACP 0x00000000DCBFA000 00010C (v05 LENOVO TP-J4    00001820 PTEC 00000002)
ACPI: DSDT 0x00000000DCBE6000 00F7AB (v01 LENOVO TP-J4    00001820 INTL 20120711)
ACPI: FACS 0x00000000DCB6A000 000040
ACPI: SLIC 0x00000000DCBFD000 000176 (v01 LENOVO TP-J4    00001820 PTEC 00000001)
ACPI: ASF! 0x00000000DCBFC000 0000A5 (v32 LENOVO TP-J4    00001820 PTEC 00000002)
ACPI: HPET 0x00000000DCBF9000 000038 (v01 LENOVO TP-J4    00001820 PTEC 00000002)
ACPI: LPIT 0x00000000DCBF8000 000094 (v01 LENOVO TP-J4    00001820 PTEC 00000002)
ACPI: APIC 0x00000000DCBF7000 000098 (v01 LENOVO TP-J4    00001820 PTEC 00000002)
ACPI: MCFG 0x00000000DCBF6000 00003C (v01 LENOVO TP-J4    00001820 PTEC 00000002)
ACPI: SSDT 0x00000000DCBE5000 00082F (v01 LENOVO SataAhci 00001000 INTL 20120711)
ACPI: SSDT 0x00000000DCBE4000 000200 (v01 LENOVO sensrhub 00000000 INTL 20120711)
ACPI: SSDT 0x00000000DCBE3000 00019A (v01 LENOVO Sata0Ide 00001000 INTL 20120711)
ACPI: SSDT 0x00000000DCBE2000 000180 (v01 LENOVO Sata1Ide 00001000 INTL 20120711)
ACPI: SSDT 0x00000000DCBE1000 000539 (v01 LENOVO Cpu0Ist  00003000 INTL 20120711)
ACPI: SSDT 0x00000000DCBE0000 000AD8 (v01 LENOVO CpuPm    00003000 INTL 20120711)
ACPI: SSDT 0x00000000DCBDC000 00358E (v01 LENOVO SaSsdt   00003000 INTL 20120711)
ACPI: SSDT 0x00000000DCBDB000 00036F (v01 LENOVO CppcTabl 00001000 INTL 20120711)
ACPI: PCCT 0x00000000DCBDA000 00006E (v05 LENOVO TP-J4    00001820 PTEC 00000002)
ACPI: SSDT 0x00000000DCBD9000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711)
ACPI: TCPA 0x00000000DCBD8000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)
ACPI: UEFI 0x00000000DCBD7000 000042 (v01 LENOVO TP-J4    00001820 PTEC 00000002)
ACPI: MSDM 0x00000000DCAB2000 000055 (v03 LENOVO TP-J4    00001820 PTEC 00000002)
ACPI: BATB 0x00000000DCBD6000 000046 (v01 LENOVO TP-J4    00001820 PTEC 00000002)
ACPI: FPDT 0x00000000DCBD5000 000064 (v01 LENOVO TP-J4    00001820 PTEC 00000002)
ACPI: UEFI 0x00000000DCBD4000 0002E2 (v01 LENOVO TP-J4    00001820 PTEC 00000002)
ACPI: DBGP 0x00000000DCBD3000 000034 (v01 LENOVO TP-J4    00001820 PTEC 00000002)
ACPI: DMAR 0x00000000DCBD2000 0000A8 (v01 LENOVO TP-J4    00001820 PTEC 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
NODE_DATA(0) allocated [mem 0x21f5fc000-0x21f5fffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000021f5fffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x0000000000057fff]
  node   0: [mem 0x0000000000059000-0x000000000008bfff]
  node   0: [mem 0x0000000000100000-0x00000000d0277fff]
  node   0: [mem 0x00000000d047a000-0x00000000da11ffff]
  node   0: [mem 0x00000000dcbff000-0x00000000dcbfffff]
  node   0: [mem 0x0000000100000000-0x000000021f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021f5fffff]
On node 0 totalpages: 2069673
  DMA zone: 64 pages used for memmap
  DMA zone: 72 pages reserved
  DMA zone: 3978 pages, LIFO batch:0
  DMA32 zone: 13885 pages used for memmap
  DMA32 zone: 888607 pages, LIFO batch:31
  Normal zone: 18392 pages used for memmap
  Normal zone: 1177088 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000dda00000-0x00000000df9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0008c000-0x000bffff]
PM: Registered nosave memory: [mem 0x000c0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xd0278000-0xd0479fff]
PM: Registered nosave memory: [mem 0xda120000-0xda31ffff]
PM: Registered nosave memory: [mem 0xda320000-0xdca22fff]
PM: Registered nosave memory: [mem 0xdca23000-0xdcb7efff]
PM: Registered nosave memory: [mem 0xdcb7f000-0xdcbfefff]
PM: Registered nosave memory: [mem 0xdcc00000-0xdf9fffff]
PM: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff]
PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xffffffff]
e820: [mem 0xdfa00000-0xf80f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 42 pages/cpu @ffff941e5f200000 s134168 r8192 d29672 u262144
pcpu-alloc: s134168 r8192 d29672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists, mobility grouping on.  Total pages: 2037260
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7980748K/8278692K available (10252K kernel code, 1163K rwdata, 2804K rodata, 1352K init, 992K bss, 297944K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 29410 entries in 115 pages
Preemptible hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
	Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 8448, nr_irqs: 488, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2594.202 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.58 BogoMIPS (lpj=8647340)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170728
ACPI: 10 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 24K
smpboot: Max logical packages: 4
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
DMAR: RMRR base: 0x000000dabaa000 end: 0x000000dabc0fff
DMAR: RMRR base: 0x000000dd800000 end: 0x000000df9fffff
DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-4300M CPU @ 2.60GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (20761.35 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdca23000-0xdcb7efff] (1425408 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 20:25:22, date: 01/15/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Error parsing PCC subspaces from PCCT
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF941E550CD400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF941E55721800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF941E55121400 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 10 GPEs in block 00 to 3F
ACPI: Power Resource [PUBS] (off)
acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf2530000-0xf2533fff 64bit]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf2520000-0xf252ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf2539000-0xf253900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf253d000-0xf253dfff]
pci 0000:00:19.0: reg 0x18: [io  0x5080-0x509f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf2534000-0xf2537fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x50a8-0x50af]
pci 0000:00:1f.2: reg 0x14: [io  0x50b4-0x50b7]
pci 0000:00:1f.2: reg 0x18: [io  0x50a0-0x50a7]
pci 0000:00:1f.2: reg 0x1c: [io  0x50b0-0x50b3]
pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf253c000-0xf253c7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf2538000-0xf25380ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:08b2] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf2400000-0xf2401fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1:   bridge window [mem 0xf2400000-0xf24fffff]
acpiphp: Slot [1] registered
pci 0000:00:1c.2: PCI bridge to [bus 03-07]
pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.2:   bridge window [mem 0xf1c00000-0xf23fffff]
pci 0000:00:1c.2:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
acpiphp: Slot [1-1] registered
pci 0000:08:00.0: [10ec:5227] type 00 class 0xff0000
pci 0000:08:00.0: reg 0x10: [mem 0xf1400000-0xf1400fff]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 08-0c]
pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.4:   bridge window [mem 0xf1400000-0xf1bfffff]
pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff]
e820: reserve RAM buffer [mem 0xd0278000-0xd3ffffff]
e820: reserve RAM buffer [mem 0xda120000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdcc00000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io  0x06a4] has been reserved
system 00:00: [io  0x06a0] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io  0x0680-0x069f] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0x0800-0x08fe] has been reserved
system 00:01: [io  0x0900-0x09fe] has been reserved
system 00:01: [io  0x0a00-0x0afe] has been reserved
system 00:01: [io  0x0b00-0x0bfe] has been reserved
system 00:01: [io  0x1800-0x18fe] has been reserved
system 00:01: [io  0x164e-0x164f] has been reserved
system 00:01: [mem 0xfe800000-0xfe80ffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io  0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs LEN2004 PNP0f13 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xf8000000-0xfbffffff] could not be reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] could not be reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:06: [mem 0xffffffff-0x100000ffe] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1:   bridge window [mem 0xf2400000-0xf24fffff]
pci 0000:00:1c.2: PCI bridge to [bus 03-07]
pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.2:   bridge window [mem 0xf1c00000-0xf23fffff]
pci 0000:00:1c.2:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 08-0c]
pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.4:   bridge window [mem 0xf1400000-0xf1bfffff]
pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
pci_bus 0000:02: resource 1 [mem 0xf2400000-0xf24fffff]
pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xf1c00000-0xf23fffff]
pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:08: resource 1 [mem 0xf1400000-0xf1bfffff]
pci_bus 0000:08: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:14.0: can't derive routing for PCI INT A
pci 0000:00:14.0: PCI INT A: not connected
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 8588K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xca42c000-0xce42c000] (64MB) mapped at [ffff941d0a42c000-ffff941d0e42bfff]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=21 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
io scheduler bfq-sq registered (default)
BFQ I/O-scheduler: v8r12 (with cgroups support)
io scheduler bfq-mq registered
BFQ I/O-scheduler: v8r12 (with cgroups support)
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 1216k, total 1216k
efifb: mode is 640x480x32, linelength=2560, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x30
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4.1 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x306c3, pf=0x10, revision=0x23
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (808943258, 0)->(830011605, -21068347)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
  Magic number: 2:592:447
rtc_cmos 00:02: setting system clock to 2018-01-15 20:25:23 UTC (1516047923)
Freeing unused kernel memory: 1352K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2016K
Freeing unused kernel memory: 1292K
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
xhci_hcd 0000:00:14.0: PCI INT A: no GSI
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
libata version 3.00 loaded.
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb: port power management may be unreliable
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo pio slum part ems apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
ata1: SATA max UDMA/133 abar m2048@0xf253c000 port 0xf253c100 irq 28
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf253c000 port 0xf253c300 irq 28
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 1-7: new full-speed USB device number 2 using xhci_hcd
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: disabling queued TRIM support
ata5.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
ata5.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata5.00: supports DRM functions and may not be fully accessible
ata1.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded
ata5.00: disabling queued TRIM support
ata1.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded
ata1.00: ATAPI: PLDS DVD-RW DU8A5SH, BU61, max UDMA/100
ata5.00: configured for UDMA/133
ata1.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded
ata1.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM            PLDS     DVD-RW DU8A5SH   BU61 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda5 sda6 sda7
sd 4:0:0:0: [sda] supports TCG Opal
sd 4:0:0:0: [sda] Attached SCSI disk
sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
usb 1-11: new full-speed USB device number 3 using xhci_hcd
PM: Starting manual resume from disk
PM: Image not found (code -22)
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 236 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount mnt-tftp.automount.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Login Prompts.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting POSIX Message Queue File System...
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 4:0:0:0: Attached scsi generic sg1 type 0
EXT4-fs (sda7): re-mounted. Opts: (null)
acpi_call: loading out-of-tree module taints kernel.
thinkpad_ec: Unknown symbol _GLOBAL_OFFSET_TABLE_ (err 0)
usb 1-12: new high-speed USB device number 4 using xhci_hcd
vboxguest: PCI device not found, probably running on physical hardware.
systemd-journald[216]: Received request to flush runtime journal from PID 1
tsc: Refined TSC clocksource calibration: 2593.993 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256411d258c, max_idle_ns: 440795337342 ns
vboxguest: PCI device not found, probably running on physical hardware.
Linux agpgart interface v0.103
ACPI: AC Adapter [ADP1] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (47 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (37 C)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
vboxdrv: Found 4 processor cores
EDAC ie31200: No ECC support
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20170728/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPCB.LPIO) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL)
ACPI: Battery Slot [BAT0] (battery present)
 (20170728/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20170728/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPCB.LPIO) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20170728/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20170728/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20170728/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPCB.LPIO) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
vboxdrv: TSC mode is Invariant, tentative frequency 2593955247 Hz
vboxdrv: Successfully loaded version 5.2.4 (interface 0x00290000)
VBoxNetAdp: Successfully started.
Non-volatile memory driver v1.3
VBoxNetFlt: Successfully started.
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
VBoxPciLinuxInit
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi: 
thinkpad_acpi: ThinkPad BIOS J4ET82WW(1.82), EC unknown
thinkpad_acpi: Lenovo ThinkPad L440, model 20AT004PIX
vboxpci: IOMMU not found (not registered)
thinkpad_ec: Unknown symbol _GLOBAL_OFFSET_TABLE_ (err 0)
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
vboxguest: PCI device not found, probably running on physical hardware.
tpm_tis 00:07: 1.2 TPM (device-id 0x0, rev-id 78)
input: PC Speaker as /devices/platform/pcspkr/input/input6
Setting dangerous option enable_rc6 - tainting kernel
Setting dangerous option enable_fbc - tainting kernel
Setting dangerous option semaphores - tainting kernel
Adding 4194300k swap on /dev/sda5.  Priority:-2 extents:1 across:4194300k SSFS
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
vboxguest: PCI device not found, probably running on physical hardware.
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:02:00.0: loaded firmware version 17.608620.0 op_mode iwlmvm
usbcore: registered new device driver usbip-host
iwlwifi 0000:02:00.0: Detected Intel(R) Wireless N 7260, REV=0x144
iwlwifi 0000:02:00.0: base HW address: e8:b1:fc:f0:84:6c
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:ee:75:38:a4:0c
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 130000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead
iTCO_vendor_support: vendor-support=0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
thinkpad_ec: Unknown symbol _GLOBAL_OFFSET_TABLE_ (err 0)
vboxguest: PCI device not found, probably running on physical hardware.
[drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
fbcon: inteldrmfb (fb0) is primary device
vboxguest: PCI device not found, probably running on physical hardware.
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0:    inputs:
snd_hda_codec_realtek hdaudioC1D0:      Dock Mic=0x19
snd_hda_codec_realtek hdaudioC1D0:      Mic=0x1a
snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
e1000e 0000:00:19.0 enp0s25: renamed from eth0
thinkpad_ec: Unknown symbol _GLOBAL_OFFSET_TABLE_ (err 0)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
vboxguest: PCI device not found, probably running on physical hardware.
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
vboxguest: PCI device not found, probably running on physical hardware.
psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4684]
clocksource: Switched to clocksource tsc
psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1170..]
psmouse serio1: synaptics: Trying to set up SMBus access
media: Linux media interface: v0.10
Linux video capture interface: v2.00
rmi4_smbus 0-002c: registering SMbus-connected sensor
rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: tm2964-001, fw id: 1637231
input: Synaptics tm2964-001 as /devices/rmi4-00/input/input19
mousedev: PS/2 mouse device common for all mice
uvcvideo: Found UVC 1.00 device Integrated Camera (0bda:5719)
uvcvideo 1-12:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-12:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-12:1.0: Entity type for entity Camera 1 was not initialized!
input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input21
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/rmi4-00/rmi4-00.fn03/serio2/input/input20
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
Console: switching to colour frame buffer device 200x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
thinkpad_ec: Unknown symbol _GLOBAL_OFFSET_TABLE_ (err 0)
vboxguest: PCI device not found, probably running on physical hardware.
vboxguest: PCI device not found, probably running on physical hardware.
thinkpad_ec: Unknown symbol _GLOBAL_OFFSET_TABLE_ (err 0)
vboxguest: PCI device not found, probably running on physical hardware.
vboxguest: PCI device not found, probably running on physical hardware.
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
random: crng init done
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
virbr1: port 1(virbr1-nic) entered blocking state
virbr1: port 1(virbr1-nic) entered disabled state
device virbr1-nic entered promiscuous mode
virbr1: port 1(virbr1-nic) entered blocking state
virbr1: port 1(virbr1-nic) entered listening state
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
virbr1: port 1(virbr1-nic) entered disabled state
wlp2s0: authenticate with dc:ef:09:f2:99:76
wlp2s0: send auth to dc:ef:09:f2:99:76 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with dc:ef:09:f2:99:76 (try 1/3)
wlp2s0: RX AssocResp from dc:ef:09:f2:99:76 (capab=0x431 status=0 aid=4)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
fuse init (API version 7.26)
rfkill: input handler disabled
FS-Cache: Loaded
Key type dns_resolver registered
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -115
cgroup: fork rejected by pids controller in /user.slice/user-1000.slice/session-c2.scope

Return To 1 System Information